Interface Failing when ever we do maintanace!
Dear All,
We are facing a Big problem everytime in our prduction server please help!
Problem: SENDER SERVER:RFC RECEIVER SERVER: IDOC MIDDLEWARE:+XI 3.0 with latest patch+
Every week when ever we restart our Receiver Server (for maintanace)! the mssges from XI to Reciver comes as "Cancelled with Errors" and no flow occurs.!
What we do when we encounter the problem is that we just AGAIN restart both XI and Receiver Server all the time! and the problem gets rectified by its own! we are ot able to diagnose the problem exactly!
And also we know that this is not a PROPER SOLUTION (Restarting Receiver and XI) when ever this "cancelled with errors" problem occure!
Please Advice how to solve the problem without Restarting XI and Receiver everytime!
This problem occurs all the time when ever we restart Receiver Server! then again we have to restart XI for rectifing the problem!
Please Advice!
Thank's in Advance!
Edited by: senthilprakash selvaraj on Mar 7, 2008 6:36 AM
Edited by: senthilprakash selvaraj on Mar 7, 2008 6:38 AM
Dear Jai,
this is the error we receive in message Monitoring when ever we restart the Receiver server!
"Returning synchronous error message to calling application: RfcAdapter: receiver channel has static errors: can not instantiate RfcPool caused by: com.sap.aii.af.rfc.RfcAdapterException: error initializing RfcClientPool:com.sap.aii.af.rfc.core.repository.RfcRepositoryException: can not connect to destination system due to: com.sap.mw.jco.JCO$Exception: (102) RFC_ERROR_COMMUNICATION: Connect to SAP gateway failed Connect_PM TYPE=A ASHOST=HMFSAPPRD SYSNR=00 GWHOST=HMFSAPPRD GWSERV=sapgw00 PCS=1 LOCATION CPIC (TCP/IP) on local host with Unicode ERROR partner not reached (host 172.16.18.102, service sapgw00) TIME Fri Mar 07 02:15:36 2008 RELEASE 640 COMPONENT NI (network interface) VERSION 37 RC -10 MODULE nixxi_r.cpp LINE 8684 DETAIL NiPConnect2 SYSTEM CALL SiPeekPendConn ERRNO 10060 ERRNO TEXT WSAETIMEDOUT: Connection timed out COUNTER 9 ."
for all the interfaces for the scenario are comming as "cancelled with errors"
"we even tried reactivation Communication Channels it didn work"
but when we again restart XI System, the flow resuming successfully! but Restarting a System is not a solution na! please advice!
Similar Messages
-
when ever i try to install photoshop cc on my laptop i keep getting this error "We've encountered the following issues installer failed to initialize. Please download adobe support advisor to detect the problem."
start at the top and work your way down applying applicable fixes until your problem is resolved.
if cc (win): https://helpx.adobe.com/creative-cloud/kb/creative-cloud-desktop-application-failed.html
if, your error is:
"Installer failed to initialize. File not found." or "Installer failed to initialize. This could be due to missing files."
first, rename OOBE Folder to OOBE.old.
to find OOBE:
64 bit win OS: Program Files x86\Common Files\Adobe\OOBE
32 bit win OS: Program Files \Common Files\Adobe\OOBE
mac os: HD>library>application support>adobe>caps
mac os: USER>library>application support>adobe>OOB
if that fails or isn't the exact error you see, uninstall, clean (http://www.adobe.com/support/contact/cscleanertool.html) and reinstall.
if you're using a dvd to install:
copy the disc contents to a desktop directory and install from that directory.
if you're using a mac:
1. Try to Create a new user account in Mac with Administrator Priviledges.
2. Login to the New user, Navigate to Mac HD> Application> Utilities> Adobe Installer folder, Locate products like Adobe Reader, Adobe Flash, Adobe Air and un-install them
3. Navigate to User Library> Application Support> Adobe and move Adobe to Trash.
4. Navigate to Mac HD> Library> Application Support> Adobe and move Adobe to Trash.
5. Start the installation again.
if everything applicable above fails, check your installation logs:
http://helpx.adobe.com/photoshop-elements/kb/troubleshoot-install-using-logs-elements.html -
After installing Itunes 10.6.3 When ever I start the computer I get a pop up the says "Applesyncnotifier.exe- unable to locate component, this application has failed to start because Corefoundation.dll was not found" How can I get rid of the pop up?
I hope it doesn't effect how I down load my itunes to my ipod and iphone.
No you should be fine. (The MobileMe service is being shut down, anyway, so there should be no impact at all.) -
Hello my friend just bought an iphone 5 and he is able to imessage me but I can't imessage him with my iPhone 4S, when ever I try it only sends a text message and I Checked and we both have wifi/ service and both have osi7 interface?
I think your problem is the fact that your friend is not registered through iMessage, just text messages. I would look around and check out how to set up iMessage on iPhones.
-
When ever the power goes out or I restart my iMac the external hard drive that is used for backups by Time Machine is dismounted and all backups are gone. I can reselect it and it will start working again, but I am worried if the iMac hard drive should fail will I be left without a backup ?
fzgy wrote:
"Mac OS X can't repair the disk. You can still open or copy files on the disk, but you can't save changes to files on the disk. Back up the disk and reformat it as soon as you can."
It's possible a heavy-duty 3rd-party disk repair app can fix it, but they're expensive (DiskWarrior is about $100), and there's no guarantee it can do it.
Am prompted to reformat but I don't have a good understanding of what this means and how to do it.
That will erase it. See Time Machine - Frequently Asked Question #5.
It sounds very much like the disk is beginning to fail, although it's possible there's a bad port, cable, connection or power supply (if it has its own).
I'd suggest getting a new one, and using it for your Time Machine backups; once you have a good backup there, reformat the old one (and select Security Options to write zeros to the whole drive -- if that fails, you know the drive is toast). Use it for secondary backups, per FAQ #27. If it has failed, get a second new one for secondary backups. -
Interfaces fails twice but executes correclty from next time
Hi,
I have interfaces which are coping data from MS Access tables to oracle tables.
NOw here i am facing somewhat strange issue.
I have 3 environments Dev,Test and PROD.
Now when i am moving scenarios from TEST to PROD ,the interfaces fails for first 2 times giving following error
ODI-1227: Task SrcSet0 (Loading) fails on the source MICROSOFT_ACCESS connection MTP_Products.
Caused By: java.sql.SQLException: [Microsoft][ODBC Driver Manager] Invalid string or buffer length
at sun.jdbc.odbc.JdbcOdbc.createSQLException(JdbcOdbc.java:6957)
at sun.jdbc.odbc.JdbcOdbc.standardError(JdbcOdbc.java:7114)
at sun.jdbc.odbc.JdbcOdbc.SQLGetDataString(JdbcOdbc.java:3907)
at sun.jdbc.odbc.JdbcOdbcResultSet.getDataString(JdbcOdbcResultSet.java:5698)
at sun.jdbc.odbc.JdbcOdbcResultSet.getString(JdbcOdbcResultSet.java:354)
and executes correctly next time.
Although i have specified fields data types and its legth more than required.
Let me know if anyone has come across such issues or anyone has idea about something like it.
Help appreciated.
Thanks,
MaheshDownload a new copy of the Firefox program: http://www.mozilla.com/firefox/all.html
Trash the current Firefox application to do a clean reinstall.
Install the new version that you have downloaded.
Your profile data is stored elsewhere in the [http://kb.mozillazine.org/Profile_folder_-_Firefox Firefox Profile Folder], so you won't lose your bookmarks and other personal data. -
When ever employee position changed, an alert should send an email
we have one requirement...
when ever any employee position changed, it should send an email ..how to do this one? any idea?
employee positions are recorded in PER_ALL_ASSIGNMENTS_F table, so if we create event alert on this table ( update ). event alert fires if there is any update to the table...but i want, only alert should send mail, when position column got updated in that table...
is it possible????Oracle provides standard API’s to harness the databases SMTP server capabilities in sending emails. All email services are wrapped under package: UTL_SMTP. The protocol consists of a set of commands for an email client to dispatch emails to a SMTP server. The UTL_SMTP package provides interfaces to the SMTP commands. For many of the commands, the package provides both a procedural and a functional interface. The functional form returns the reply from the server for processing by the client. The procedural form checks the reply and will raise an exception if the reply indicates a transient (400-range reply code) or permanent error (500-range reply code). Otherwise, it discards the reply.
c := UTL_SMTP.OPEN_CONNECTION('<server>.unix.us.ups.com');
UTL_SMTP.HELO(c, '<server>.unix.us.ups.com');
UTL_SMTP.MAIL(c, l_recepient);
UTL_SMTP.RCPT(c, l_recepient);
UTL_SMTP.OPEN_DATA(c);
send_header('From', p_from);
send_header('To', l_recepient);
send_header('Subject', p_subject);
UTL_SMTP.WRITE_DATA(c, UTL_TCP.CRLF || p_message);
UTL_SMTP.CLOSE_DATA(c);
UTL_SMTP.QUIT(c); -
Hi,
I have 2 ASA 5520 firewall configured with HA(Failover). but some time my primary firewall goes down standby firewall doesnt come active. i found below log from primary firewall..what is the reason & what is the mining of reason code of 4...
Nov 30 2012 14:07:47: %ASA-1-105002: (ASA) Enabling failover.
Nov 30 2012 14:08:43: %ASA-1-105043: (Primary) Failover interface failed
Nov 30 2012 14:08:56: %ASA-1-103001: (Primary) No response from other firewall (reason code = 4).
After i hard reboot my standby firewall below log had been generated..
Nov 30 2012 15:51:57: %ASA-1-105042: (Primary) Failover interface OK
Nov 30 2012 15:52:02: %ASA-1-709003: (Primary) Beginning configuration replication: Send to mate.
Nov 30 2012 15:52:15: %ASA-1-709004: (Primary) End Configuration Replication (ACT)
Please assist....
Regards
SuhasHi,
The explanation for that can be found in the ASAs syslog messages document.
Here it is
103001 Error Message %ASA-1-103001: (Primary) No response from other firewall (reason
code = code).
Explanation This is a failover message, which is displayed if the primary unit is unable to communicate with the secondary unit over the failover cable. (Primary) can also be listed as (Secondary). for the secondary unit. Table 1-2 lists the reason codes and the descriptions to determine why the failover occurred.
Table 1-2 Reason Codes
Reason Code
Description
1
The local unit is not receiving the hello packet on the failover LAN interface when LAN failover occurs or on the serial failover cable when serial failover occurs, and declares that the peer is down.
2
An interface did not pass one of the four failover tests, which are as follows: 1) Link Up, 2) Monitor for Network Traffic, 3) ARP, and 4) Broadcast Ping.
3
No proper ACK for 15+ seconds after a command was sent on the serial cable.
4
The local unit is not receiving the hello packet on the failover LAN and other data interfaces and it is declaring that the peer is down.
5
The failover LAN interface is down, and other data interfaces are not responding to additional interface testing. In addition, the local unit is declaring that the peer is down.
Recommended Action Verify that the failover cable is connected correctly and both units have the same hardware, software, and configuration. If the problem persists, contact the Cisco TAC.
Are you saying that the Primary ASA loses all connectivity to the Secondary ASA (looking at the log messages). Judging by the above Cisco description it would mean the Primary ASA isnt getting Failover Hellos through any of the monitored interfaces which again would make it seem like the Secondary Firewall is expriencing some problems.
- Jouni -
[vmware] Virtual machine communication interface failed
hello,
on a fresh install of archlinux, i have installed vmware workstation 11.0 but when i execute this command :
vmware-modconfig --console --install-all
i have this error
Virtual machine communication interface failed
full log
vmware-modconfig --console --install-all
Stopping VMware services:
VMware Authentication Daemon done
VM communication interface socket family done
Virtual machine communication interface done
Virtual machine monitor done
Blocking file system done
make : on entre dans le répertoire « /tmp/modconfig-sc9HDC/vmmon-only »
Using kernel build system.
/sbin/make -C /lib/modules/3.17.4-1-ARCH/build/include/.. SUBDIRS=$PWD SRCROOT=$PWD/. \
MODULEBUILDDIR= modules
make[1] : on entre dans le répertoire « /usr/lib/modules/3.17.4-1-ARCH/build »
CC [M] /tmp/modconfig-sc9HDC/vmmon-only/linux/driverLog.o
CC [M] /tmp/modconfig-sc9HDC/vmmon-only/linux/driver.o
CC [M] /tmp/modconfig-sc9HDC/vmmon-only/linux/hostif.o
CC [M] /tmp/modconfig-sc9HDC/vmmon-only/common/memtrack.o
CC [M] /tmp/modconfig-sc9HDC/vmmon-only/common/apic.o
CC [M] /tmp/modconfig-sc9HDC/vmmon-only/common/hashFunc.o
CC [M] /tmp/modconfig-sc9HDC/vmmon-only/common/vmx86.o
CC [M] /tmp/modconfig-sc9HDC/vmmon-only/common/cpuid.o
/tmp/modconfig-sc9HDC/vmmon-only/linux/driver.c:1332:1: attention : always_inline function might not be inlinable [-Wattributes]
LinuxDriverSyncReadTSCs(uint64 *delta) // OUT: TSC max - TSC min
^
CC [M] /tmp/modconfig-sc9HDC/vmmon-only/common/task.o
CC [M] /tmp/modconfig-sc9HDC/vmmon-only/common/comport.o
CC [M] /tmp/modconfig-sc9HDC/vmmon-only/common/phystrack.o
CC [M] /tmp/modconfig-sc9HDC/vmmon-only/vmcore/moduleloop.o
LD [M] /tmp/modconfig-sc9HDC/vmmon-only/vmmon.o
Building modules, stage 2.
MODPOST 1 modules
CC /tmp/modconfig-sc9HDC/vmmon-only/vmmon.mod.o
LD [M] /tmp/modconfig-sc9HDC/vmmon-only/vmmon.ko
make[1] : on quitte le répertoire « /usr/lib/modules/3.17.4-1-ARCH/build »
/sbin/make -C $PWD SRCROOT=$PWD/. \
MODULEBUILDDIR= postbuild
make[1] : on entre dans le répertoire « /tmp/modconfig-sc9HDC/vmmon-only »
make[1]: « postbuild » est à jour.
make[1] : on quitte le répertoire « /tmp/modconfig-sc9HDC/vmmon-only »
cp -f vmmon.ko ./../vmmon.o
make : on quitte le répertoire « /tmp/modconfig-sc9HDC/vmmon-only »
make : on entre dans le répertoire « /tmp/modconfig-sc9HDC/vmnet-only »
Using kernel build system.
/sbin/make -C /lib/modules/3.17.4-1-ARCH/build/include/.. SUBDIRS=$PWD SRCROOT=$PWD/. \
MODULEBUILDDIR= modules
make[1] : on entre dans le répertoire « /usr/lib/modules/3.17.4-1-ARCH/build »
CC [M] /tmp/modconfig-sc9HDC/vmnet-only/driver.o
CC [M] /tmp/modconfig-sc9HDC/vmnet-only/hub.o
CC [M] /tmp/modconfig-sc9HDC/vmnet-only/userif.o
CC [M] /tmp/modconfig-sc9HDC/vmnet-only/netif.o
CC [M] /tmp/modconfig-sc9HDC/vmnet-only/bridge.o
CC [M] /tmp/modconfig-sc9HDC/vmnet-only/procfs.o
CC [M] /tmp/modconfig-sc9HDC/vmnet-only/smac_compat.o
CC [M] /tmp/modconfig-sc9HDC/vmnet-only/smac.o
CC [M] /tmp/modconfig-sc9HDC/vmnet-only/vnetEvent.o
CC [M] /tmp/modconfig-sc9HDC/vmnet-only/vnetUserListener.o
LD [M] /tmp/modconfig-sc9HDC/vmnet-only/vmnet.o
Building modules, stage 2.
MODPOST 1 modules
CC /tmp/modconfig-sc9HDC/vmnet-only/vmnet.mod.o
LD [M] /tmp/modconfig-sc9HDC/vmnet-only/vmnet.ko
make[1] : on quitte le répertoire « /usr/lib/modules/3.17.4-1-ARCH/build »
/sbin/make -C $PWD SRCROOT=$PWD/. \
MODULEBUILDDIR= postbuild
make[1] : on entre dans le répertoire « /tmp/modconfig-sc9HDC/vmnet-only »
make[1]: « postbuild » est à jour.
make[1] : on quitte le répertoire « /tmp/modconfig-sc9HDC/vmnet-only »
cp -f vmnet.ko ./../vmnet.o
make : on quitte le répertoire « /tmp/modconfig-sc9HDC/vmnet-only »
Starting VMware services:
Virtual machine monitor done
Virtual machine communication interface failed
VM communication interface socket family done
Blocking file system done
Virtual ethernet done
VMware Authentication Daemon done
Unable to start services
[root@hulk vmware-root]# ls
vmware-818.log vmware-authdlauncher-2058.log vmware-vmis-1888.log
vmware-apploader-1976.log vmware-vmis-1407.log vmware-vmis-1910.log
vmware-apploader-818.log vmware-vmis-1429.log
[root@hulk vmware-root]# chown gael:users *
[root@hulk vmware-root]# chown -R gael:users ./
[root@hulk vmware-root]# modprobe vmci
modprobe: FATAL: Module vmci not found.
[root@hulk vmware-root]# vmware-modconfig --console --install-all -v
/usr/lib/vmware/bin/vmware-modconfig-console: invalid option -- 'v'
Stopping VMware services:
VMware Authentication Daemon done
VM communication interface socket family done
Virtual machine communication interface done
Virtual machine monitor done
Blocking file system done
make : on entre dans le répertoire « /tmp/modconfig-KdpHql/vmmon-only »
Using kernel build system.
/sbin/make -C /lib/modules/3.17.4-1-ARCH/build/include/.. SUBDIRS=$PWD SRCROOT=$PWD/. \
MODULEBUILDDIR= modules
make[1] : on entre dans le répertoire « /usr/lib/modules/3.17.4-1-ARCH/build »
CC [M] /tmp/modconfig-KdpHql/vmmon-only/linux/driverLog.o
CC [M] /tmp/modconfig-KdpHql/vmmon-only/linux/driver.o
CC [M] /tmp/modconfig-KdpHql/vmmon-only/linux/hostif.o
CC [M] /tmp/modconfig-KdpHql/vmmon-only/common/memtrack.o
CC [M] /tmp/modconfig-KdpHql/vmmon-only/common/apic.o
CC [M] /tmp/modconfig-KdpHql/vmmon-only/common/hashFunc.o
CC [M] /tmp/modconfig-KdpHql/vmmon-only/common/vmx86.o
CC [M] /tmp/modconfig-KdpHql/vmmon-only/common/cpuid.o
/tmp/modconfig-KdpHql/vmmon-only/linux/driver.c:1332:1: attention : always_inline function might not be inlinable [-Wattributes]
LinuxDriverSyncReadTSCs(uint64 *delta) // OUT: TSC max - TSC min
^
CC [M] /tmp/modconfig-KdpHql/vmmon-only/common/task.o
CC [M] /tmp/modconfig-KdpHql/vmmon-only/common/comport.o
CC [M] /tmp/modconfig-KdpHql/vmmon-only/common/phystrack.o
CC [M] /tmp/modconfig-KdpHql/vmmon-only/vmcore/moduleloop.o
LD [M] /tmp/modconfig-KdpHql/vmmon-only/vmmon.o
Building modules, stage 2.
MODPOST 1 modules
CC /tmp/modconfig-KdpHql/vmmon-only/vmmon.mod.o
LD [M] /tmp/modconfig-KdpHql/vmmon-only/vmmon.ko
make[1] : on quitte le répertoire « /usr/lib/modules/3.17.4-1-ARCH/build »
/sbin/make -C $PWD SRCROOT=$PWD/. \
MODULEBUILDDIR= postbuild
make[1] : on entre dans le répertoire « /tmp/modconfig-KdpHql/vmmon-only »
make[1]: « postbuild » est à jour.
make[1] : on quitte le répertoire « /tmp/modconfig-KdpHql/vmmon-only »
cp -f vmmon.ko ./../vmmon.o
make : on quitte le répertoire « /tmp/modconfig-KdpHql/vmmon-only »
make : on entre dans le répertoire « /tmp/modconfig-KdpHql/vmnet-only »
Using kernel build system.
/sbin/make -C /lib/modules/3.17.4-1-ARCH/build/include/.. SUBDIRS=$PWD SRCROOT=$PWD/. \
MODULEBUILDDIR= modules
make[1] : on entre dans le répertoire « /usr/lib/modules/3.17.4-1-ARCH/build »
CC [M] /tmp/modconfig-KdpHql/vmnet-only/driver.o
CC [M] /tmp/modconfig-KdpHql/vmnet-only/hub.o
CC [M] /tmp/modconfig-KdpHql/vmnet-only/userif.o
CC [M] /tmp/modconfig-KdpHql/vmnet-only/netif.o
CC [M] /tmp/modconfig-KdpHql/vmnet-only/bridge.o
CC [M] /tmp/modconfig-KdpHql/vmnet-only/procfs.o
CC [M] /tmp/modconfig-KdpHql/vmnet-only/smac_compat.o
CC [M] /tmp/modconfig-KdpHql/vmnet-only/smac.o
CC [M] /tmp/modconfig-KdpHql/vmnet-only/vnetEvent.o
CC [M] /tmp/modconfig-KdpHql/vmnet-only/vnetUserListener.o
LD [M] /tmp/modconfig-KdpHql/vmnet-only/vmnet.o
Building modules, stage 2.
MODPOST 1 modules
CC /tmp/modconfig-KdpHql/vmnet-only/vmnet.mod.o
LD [M] /tmp/modconfig-KdpHql/vmnet-only/vmnet.ko
make[1] : on quitte le répertoire « /usr/lib/modules/3.17.4-1-ARCH/build »
/sbin/make -C $PWD SRCROOT=$PWD/. \
MODULEBUILDDIR= postbuild
make[1] : on entre dans le répertoire « /tmp/modconfig-KdpHql/vmnet-only »
make[1]: « postbuild » est à jour.
make[1] : on quitte le répertoire « /tmp/modconfig-KdpHql/vmnet-only »
cp -f vmnet.ko ./../vmnet.o
make : on quitte le répertoire « /tmp/modconfig-KdpHql/vmnet-only »
Starting VMware services:
Virtual machine monitor done
Virtual machine communication interface failed
VM communication interface socket family done
Blocking file system done
Virtual ethernet done
VMware Authentication Daemon done
Unable to start services
thanks for your helpAlso having the same problem
dustin ~ $ sudo vmware-modconfig --console --install-all
[sudo] password for dustin:
Stopping VMware services:
VMware Authentication Daemon done
VM communication interface socket family done
Virtual machine communication interface done
Virtual machine monitor done
Blocking file system done
make: Entering directory '/tmp/modconfig-KZzuso/vmmon-only'
Using kernel build system.
/sbin/make -C /lib/modules/3.18.4-1-ARCH/build/include/.. SUBDIRS=$PWD SRCROOT=$PWD/. \
MODULEBUILDDIR= modules
make[1]: Entering directory '/usr/lib/modules/3.18.4-1-ARCH/build'
CC [M] /tmp/modconfig-KZzuso/vmmon-only/linux/driverLog.o
CC [M] /tmp/modconfig-KZzuso/vmmon-only/linux/driver.o
CC [M] /tmp/modconfig-KZzuso/vmmon-only/linux/hostif.o
CC [M] /tmp/modconfig-KZzuso/vmmon-only/common/memtrack.o
CC [M] /tmp/modconfig-KZzuso/vmmon-only/common/hashFunc.o
CC [M] /tmp/modconfig-KZzuso/vmmon-only/common/apic.o
CC [M] /tmp/modconfig-KZzuso/vmmon-only/common/vmx86.o
CC [M] /tmp/modconfig-KZzuso/vmmon-only/common/cpuid.o
CC [M] /tmp/modconfig-KZzuso/vmmon-only/common/task.o
CC [M] /tmp/modconfig-KZzuso/vmmon-only/common/comport.o
CC [M] /tmp/modconfig-KZzuso/vmmon-only/common/phystrack.o
CC [M] /tmp/modconfig-KZzuso/vmmon-only/vmcore/moduleloop.o
/tmp/modconfig-KZzuso/vmmon-only/linux/driver.c:1332:1: warning: always_inline function might not be inlinable [-Wattributes]
LinuxDriverSyncReadTSCs(uint64 *delta) // OUT: TSC max - TSC min
^
LD [M] /tmp/modconfig-KZzuso/vmmon-only/vmmon.o
Building modules, stage 2.
MODPOST 1 modules
CC /tmp/modconfig-KZzuso/vmmon-only/vmmon.mod.o
LD [M] /tmp/modconfig-KZzuso/vmmon-only/vmmon.ko
make[1]: Leaving directory '/usr/lib/modules/3.18.4-1-ARCH/build'
/sbin/make -C $PWD SRCROOT=$PWD/. \
MODULEBUILDDIR= postbuild
make[1]: Entering directory '/tmp/modconfig-KZzuso/vmmon-only'
make[1]: 'postbuild' is up to date.
make[1]: Leaving directory '/tmp/modconfig-KZzuso/vmmon-only'
cp -f vmmon.ko ./../vmmon.o
make: Leaving directory '/tmp/modconfig-KZzuso/vmmon-only'
make: Entering directory '/tmp/modconfig-KZzuso/vmnet-only'
Using kernel build system.
/sbin/make -C /lib/modules/3.18.4-1-ARCH/build/include/.. SUBDIRS=$PWD SRCROOT=$PWD/. \
MODULEBUILDDIR= modules
make[1]: Entering directory '/usr/lib/modules/3.18.4-1-ARCH/build'
CC [M] /tmp/modconfig-KZzuso/vmnet-only/driver.o
CC [M] /tmp/modconfig-KZzuso/vmnet-only/hub.o
CC [M] /tmp/modconfig-KZzuso/vmnet-only/userif.o
CC [M] /tmp/modconfig-KZzuso/vmnet-only/netif.o
CC [M] /tmp/modconfig-KZzuso/vmnet-only/bridge.o
CC [M] /tmp/modconfig-KZzuso/vmnet-only/procfs.o
CC [M] /tmp/modconfig-KZzuso/vmnet-only/smac_compat.o
CC [M] /tmp/modconfig-KZzuso/vmnet-only/smac.o
CC [M] /tmp/modconfig-KZzuso/vmnet-only/vnetEvent.o
In file included from include/linux/pci.h:34:0,
from /tmp/modconfig-KZzuso/vmnet-only/compat_netdevice.h:27,
from /tmp/modconfig-KZzuso/vmnet-only/netif.c:43:
include/linux/pci_ids.h:2248:0: warning: "PCI_VENDOR_ID_VMWARE" redefined
#define PCI_VENDOR_ID_VMWARE 0x15ad
^
In file included from /tmp/modconfig-KZzuso/vmnet-only/net.h:38:0,
from /tmp/modconfig-KZzuso/vmnet-only/vnetInt.h:26,
from /tmp/modconfig-KZzuso/vmnet-only/netif.c:42:
/tmp/modconfig-KZzuso/vmnet-only/vm_device_version.h:56:0: note: this is the location of the previous definition
#define PCI_VENDOR_ID_VMWARE 0x15AD
^
CC [M] /tmp/modconfig-KZzuso/vmnet-only/vnetUserListener.o
In file included from /tmp/modconfig-KZzuso/vmnet-only/net.h:38:0,
from /tmp/modconfig-KZzuso/vmnet-only/vnetInt.h:26,
from /tmp/modconfig-KZzuso/vmnet-only/bridge.c:52:
/tmp/modconfig-KZzuso/vmnet-only/vm_device_version.h:56:0: warning: "PCI_VENDOR_ID_VMWARE" redefined
#define PCI_VENDOR_ID_VMWARE 0x15AD
^
In file included from include/linux/pci.h:34:0,
from /tmp/modconfig-KZzuso/vmnet-only/compat_netdevice.h:27,
from /tmp/modconfig-KZzuso/vmnet-only/bridge.c:51:
include/linux/pci_ids.h:2248:0: note: this is the location of the previous definition
#define PCI_VENDOR_ID_VMWARE 0x15ad
^
LD [M] /tmp/modconfig-KZzuso/vmnet-only/vmnet.o
Building modules, stage 2.
MODPOST 1 modules
CC /tmp/modconfig-KZzuso/vmnet-only/vmnet.mod.o
LD [M] /tmp/modconfig-KZzuso/vmnet-only/vmnet.ko
make[1]: Leaving directory '/usr/lib/modules/3.18.4-1-ARCH/build'
/sbin/make -C $PWD SRCROOT=$PWD/. \
MODULEBUILDDIR= postbuild
make[1]: Entering directory '/tmp/modconfig-KZzuso/vmnet-only'
make[1]: 'postbuild' is up to date.
make[1]: Leaving directory '/tmp/modconfig-KZzuso/vmnet-only'
cp -f vmnet.ko ./../vmnet.o
make: Leaving directory '/tmp/modconfig-KZzuso/vmnet-only'
Starting VMware services:
Virtual machine monitor done
Virtual machine communication interface failed
VM communication interface socket family done
Blocking file system done
Virtual ethernet done
VMware Authentication Daemon done
Unable to start services
Now I have the same failed communication interface also
Starting VMware services:
Virtual machine monitor done
Virtual machine communication interface failed
VM communication interface socket family done
Blocking file system done
Virtual ethernet done
VMware Authentication Daemon done
Unable to start services
PS, I have the vmware-patch 11.0.0-1 installed -
I keep getting a " the connection to the server failed" when trying to use hotmail
I keep getting a "The connectioin to the server failed" when trying to use hotmail
Go into Settings, Mail, Contacts, Calendars, select the Hotmail account and check the account settings. Did you set it up with the Hotmail preset? Has this account ever worked on the iPhone? What other troubleshooting have you done?
-
I got the error -2147467262 "No such interface supported" when open an ActiveX automation reference to a proprietary DLL. I check the forum which suggested solutions related to comcat.dll and IE6.0. I also tried to re-reqister the dll by regsvr32.exe, still does not work. However, I did nto get any luck. I was told that the DLL support iDispatch interface and should work ok with ActiveX in labview. Any suggestions? I appreciate it.
Hello, Nandini,
I am using the WinXP and I am calling the DLL provided by Pirouette for their chemometrics software. I just solved the error -2147467262, but the new error comes out is :
Error code: -2147467259 Exception occured in IxAsObjs.CoSIMCAPredict.1, Language Server QueryInterface failed: No such interface supported.
Here is a few word for the problem from priouette:
" just a few more words that might help you understand the nature of the problem. your LabView client talks to AlgSuite.dll using IDispatch interfaces AlgSuite.dll communicates with the language server on an IUnknown interface.
Your client knows nothing about the internal workings of AlgSuite.AlgSuite communicating with objects that do not have IDispatch interfaces should be irrelevant to your client."
Since the VB demo works fine in my machine, so they though it is percular to labview. Any comments? I appreciate it.
LvvL -
Webservice interface failed, sapstartsrv stopped
Hi,
in our SRM production (abap+java) system's syslog we get following error -->
webservice interface failed, sapstartsrv stopped
=================
We are not sure what error is this.
Can somebody help in this?
Thanks in Advance,
Akki.Hi
Please see related links ->
Note 1081201 SAP Start Service may crash when fetching a Java callstack
Note 927637 Web service authentication in sapstartsrv as of Release 7.00
Note 936273 sapstartsrv for all platforms
Note 897933 Start and stop sequence for SAP Systems
Note 867892 MMC shows current SAP processes as being stopped
Note 877795 Problems w/ sapstartsrv as of Release 7.00 & 6.40 patch 169
Re: How to stop sapstartsrv and sapstart processes ?
https://forums.sdn.sap.com/click.jspa?searchID=7502269&messageID=3661396
https://forums.sdn.sap.com/click.jspa?searchID=7502269&messageID=9957
Regards
- Atul -
Installation of IPC AP 7.0 Jar is getting Failed when uploading in CRM
Hello Experts,
we did some changes in the previosly uploded version of IPC AP 7.0 customer user exit Jar file in eclipse.
While uploading the new modified jar through transaction /SAPCND/UE_DEV in CRM we are getting error :" installation of module <Jar file name > has failed ".
when we checked the logs in SM 53 we seen the below mentioned error:
Message: Exception of type com.sap.sql.log.OpenSQLException caught: Exception of type com.sap.sql.sqlparser.CommonSQLParserException: - statement "DELETE FROM "SVMCRT_MOD_TR_T" WHERE "MODULE_NAME" LIKE ? ESCAPE ^ (reason: Modification of ABAP tables is not permit ted)" is not supported
caught: - statement "DELETE FROM "SVMCRT_MOD_TR_T" WHERE "MODULE_NAME" LIKE ? ESCAPE ^ (reason: Modification of ABAP tables is not permitted)" is not supported
--> com.sap.sql.log.OpenSQLException: Exception of type com.sap.sql.sqlparser.CommonSQLParserException: - statement "DELETE FROM "SVMCRT_MOD_TR_T" WHERE "MODULE_NAME" LIKE ? ESCAPE '^' (reason: Modification of ABAP tables is n" is not suppor ted
caught: - statement "DELETE FROM "SVMCRT_MOD_TR_T" WHERE "MODULE_NAME" LIKE ? ESCAPE '^' (reason: Modification of ABAP tables is not permitted)" is not supported
at com.sap.sql.log.Syslog.createAndLogOpenSQLException(Ljava/lang/Class;Ljava/lang/String;[Ljava/lang/Object;)Lcom/sap/sql/log/OpenSQLException;(Syslog.java:85)
at
if required i can post the complete stack trace.
any inputs/suggestions are most welcome.
Thanks & regards,
SiddharthHi Mark,
Yesterday after Posting the thread we found the same Note ,Issue occured because of JAVA write access was not enabled on the table ,After enabling it as mentioned in SAP Note, Jar file get successfully uploaded.
Thanks for your Help also.
Regards,
Siddharth -
SDM failed when deploying a Web Dynpro application
SDM failed when deploying a Web Dynpro application - I get the following error message:
Sep 19, 2006 2:25:34 PM /userOut/deploy (com.sap.ide.eclipse.sdm.threading.DeployThreadManager) [Thread[Deploy Thread,5,main]] ERROR:
[001]Deployment aborted
Settings
SDM host : eix-blade-011
SDM port : 50118
URL to deploy : file:/D:/DOCUME1/AMRM1.AZI/LOCALS1/Temp/temp43621sap.comwelcome.ear
Deployment exception : Server eix-blade-011 did not accept login request as admin on port 50118. Details: ERROR: Could not establish connection to server eix-blade-011 at port 50118: eix-blade-011
Inner exception was :
Server eix-blade-011 did not accept login request as admin on port 50118. Details: ERROR: Could not establish connection to server eix-blade-011 at port 50118: eix-blade-011Amr Azim,
You must have logged in thru a dedicated connection to any server through say VPN before deploying.This way the sdm uses the same login as that of already establised connection.
So 'sign of' all connections to any servers before deploying and redeploy your application.Here you will be prompted to supply the sdm password and deployment shall proceed. -
Logon of user in client failed when starting a step
Hi All,
I have a question. (Might be simple to many).
<b>Logon of user in client failed when starting a step.</b>
Some of my scheduled jobs are getting cancelled due to the above error. It has been noted that the user corresponding to that job has been locked.
Can anybody suggest how to change the user of a Background Job (without deleting and re-creating the same).
Thanks and Regards
DevanandHi
You cannot change the owner of the job once it is in released status.
Better, create the job with same varient by an existing user and delete the cancelled job.
regards,
Vinodh.
Maybe you are looking for
-
We are working on a film project on Adobe Premiere Pro CC 2014. Two editors are working on the same film project (same pproj file ) on two machines. As a result the bin structure and the file structure is exactly the same. We even bought two licenses
-
Since updating my iPhone 5 to OS 7, changes made to calendar on phone no longer sync to Mac Book Pro OSX 10.6.8 via iTunes 11.1.1. Any thoughts?
-
ADF FACES: autoSubmit not allowed on af:selectOneRadio
In EA13, the autoSubmit attribute is being disallowed (by the editor's XML schema validator) on an af:selectOneRadio control, even though it is documented to accept this attribute. This seems very inconsistent since the other "select" type input cont
-
Can' get my pictures to come in on the TV right side up as they are in the folder on the PC. Some do, some don't
-
We have installed SCM 5.0 on Windows system32 bit with MS SQL server (Microsoft Windows Server 2003 Enterprise Edition Service Pack 1) While installing the livecache 7.6.* not getting the option for installing the livecache server & getting option fo