Interface for DEAS 12m4 Release.
Dear Experts
Is there any interface available for SAP and I-DEAS 12m4 Release.
Regards,
Hi,
The interface is available till Ideas - 11.
Anirudh,
award if useful
Similar Messages
-
API/Interface for Blanket PO Release
Hi All,
Do we have any interface or api for Blanket PO release? We searched, couldn't find anything.
Is there any workaround? we are in the process of automation. Its very urgent.
Thanks in advance.
Regards,
Ganesan GHello,
As a specific solution you may use the following packages/function in R11i :
• PO_RELEASES_SV4.get_release_num, to get the last release number,
• PO_LINE_LOCATIONS_PKG_S3.get_max_shipment_num, to get the last shipment_num of a release,
• PO_RELEASES_PKG_S0.Insert_Row to create a release,
• PO_LINE_LOCATIONS_PKG_s0.Insert_Row to create a shipment line
Beware, these packages are not public, so they may potentially be updated through a patch / upgrade.
As previously said by Sandeep Gandhi, the best solution is to use requisitions, but you need to manage the corresponding setup.
Regards,
Xavier -
Redundancy Interface for Content Server Release 6.x
Third-generation Content Server is UCS C220 (Not Vmware).
I see from TCS Release 6.x Quick Start which cannot use LAN2.
I'm not sure. How to connect LAN for redundancy interface or not because it have many NIC card.
Dual 1-Gb Ethernet ports:
LAN1 (Arrow 7, left pointer)— Use this port to connect the Content Server to the network (also see Figure 3)
LAN2 (Arrow 7, right pointer)— Not usedHi,
The TCS server supports only single NIC in a deployment. That particular NIC value is used to generate the checksum, which needs to be passed along with the Release keys to bring up the content engine. That is the reason if you connect any other NIC to the network, the content engine will not start.
Also, when the release keys are generated on the license server, it uses the NIC with the lowest value (always the first NIC on the server).
I know its a complete waste to have so many NICs and use only one. But what can I say, thats the way Cisco designed the server..!!!
Regards,
-Deepti -
API or interface table to create releases for a blanket purchase agreement
Hi
I need to know if Oracle provides a standard API or interface table to create releases for a blanket purchase agreement.
I tried using the release_num field in PO_HEADERS_INTERFACE, PO_LINES_INTERFACE. But this is not working.
I'm able to create the blanket purchase agreement using the open interfaces, but not the releases.
Regards,
AlisterHi Alister,
You can't create a release of a BPA through API, there is no such APIs provided by oracle.
Where as you can create a BPA by using API. You need to dump/poplulate data in PO_headers_interface & PO_Lines_intreface table.. Then use Purchasing Documents Open Interface API to create a BPA.
Regards,
S.P DASH -
User Exit for Purchase Order Release Strategy
Hi,
I am a little new to this, how do I search for a user exit for purchase order release strategy (TCode ME29N).
Thanks in advance.
MickHi
Check the following Exits and BADI for Pur Requisition
Enhancement
MEVME001 WE default quantity calc. and over/ underdelivery tolerance
MM06E001 User exits for EDI inbound and outbound purchasing documents
MM06E003 Number range and document number
MM06E004 Control import data screens in purchase order
MM06E005 Customer fields in purchasing document
MM06E007 Change document for requisitions upon conversion into PO
MM06E008 Monitoring of contr. target value in case of release orders
MM06E009 Relevant texts for "Texts exist" indicator
MM06E010 Field selection for vendor address
MM06E011 Activate PReq Block
MMAL0001 ALE source list distribution: Outbound processing
MMAL0002 ALE source list distribution: Inbound processing
MMAL0003 ALE purcasing info record distribution: Outbound processing
MMAL0004 ALE purchasing info record distribution: Inbound processing
MMDA0001 Default delivery addresses
MMFAB001 User exit for generation of release order
MRFLB001 Control Items for Contract Release Order
AMPL0001 User subscreen for additional data on AMPL
LMEDR001 Enhancements to print program
LMELA002 Adopt batch no. from shipping notification when posting a GR
LMELA010 Inbound shipping notification: Transfer item data from IDOC
LMEQR001 User exit for source determination
LMEXF001 Conditions in Purchasing Documents Without Invoice Receipt
LWSUS001 Customer-Specific Source Determination in Retail
M06B0001 Role determination for purchase requisition release
M06B0002 Changes to comm. structure for purchase requisition release
M06B0003 Number range and document number
MEQUERY1 Enhancement to Document Overview ME21N/ME51N
MELAB001 Gen. forecast delivery schedules: Transfer schedule implem.
MEFLD004 Determine earliest delivery date f. check w. GR (only PO)
MEETA001 Define schedule line type (backlog, immed. req., preview)
ME590001 Grouping of requsitions for PO split in ME59
M06E0005 Role determination for release of purchasing documents
M06E0004 Changes to communication structure for release purch. doc.
M06B0005 Changes to comm. structure for overall release of requisn.
M06B0004 Number range and document number
Business Add-in
ME_PROCESS_REQ_CUST Enhancements for Processing Enjoy PReqs: Customer
ME_PROCESS_REQ Enhancements for Processing Enjoy PReqs: Internal
ME_PROCESS_PO_CUST Enhancements for Processing Enjoy Purchase Order: Customer
ME_PROCESS_PO Enhancements for Processing Enjoy Purchase Order: Intern.
ME_PROCESS_COMP Processing of Component Default Data at Time of GR: Custome
ME_PO_SC_SRV BAdI: Service Tab Page for Subcontracting
ME_PO_PRICING_CUST Enhancements to Price Determination: Customer
ME_PO_PRICING Enhancements to Price Determination: Internal
ME_INFOREC_SEND Capture/Send Purchase Info Record Changes - Internal Use
ME_HOLD_PO Hold Enjoy Purchase Orders: Activation/Deactivation
ME_GUI_PO_CUST Customer's Own Screens in Enjoy Purchase Order
ME_FIELDSTATUS_STOCK FM Account Assignment Behavior for Stock PR/PO
ME_DP_CLEARING Clearing (Offsetting) of Down Payments and Payment Requests
ME_PURCHDOC_POSTED Purchasing Document Posted
SMOD_MRFLB001 Control Items for Contract Release Order
EXTENSION_US_TAXES Extended Tax Calculation with Additional Data
ARC_MM_EKKO_WRITE BAdI: Enhancement of Scope of Archiving (MM_EKKO)
ARC_MM_EKKO_CHECK BAdI: Enhancement of Archivability Check (MM_EKKO)
MM_EDI_DESADV_IN Supplementation of Delivery Interface from Purchase Order
MM_DELIVERY_ADDR_SAP Determination of Delivery Address
ME_WRF_STD_DNG PO Controlling Reminder: Extension to Standard Reminder
ME_TRIGGER_ATP Triggers New ATP for Changes in EKKO, EKPO, EKPV
ME_TRF_RULE_CUST_OFF BADI for Deactivation of Field T161V-REVFE
ME_TAX_FROM_ADDRESS Tax jurisdiction code taken from address
ME_REQ_POSTED Purchase Requisition Posted
ME_REQ_OI_EXT Commitment Update in the Case of External Requisitions
ME_RELEASE_CREATE BAdI: Release Creation for Sched.Agrmts with Release Docu.
ME_DEFINE_CALCTYPE Control of Pricing Type: Additional Fields
ME_CHANGE_OUTTAB Enrich ALV Output Table in Purchasing
ME_CHANGE_CHARACTER Customer-Specific Characteristics for Product Allocation
ME_CCP_DEL_DURATION Calc. of Delivery Duration in CCP Process (Not in Standard)
ME_CCP_BESWK_AUTH_CH BAdI for authorization checks for procuring plant
ME_CCP_ACTIVE_CHECK BAdI to check whether CCP process is active
ME_BSART_DET Change document type for automatically generated POs
ME_BAPI_PR_CREATE_02
ME_BAPI_PR_CREATE_01
ME_BAPI_PO_CREATE_02
ME_BAPI_PO_CREATE_01
ME_BADI_DISPLAY_DOC BAdI for Internal Control of Transaction to be Invoked
ME_ACTV_CANCEL_PO BAdI for Activating the Cancel Function at Header Level
MEGUI_LAYOUT BAdI for Enjoy Purchasing GUI
ME_CHECK_ALL_ITEMS Run Through Items Again in the Event of Changes in EKKO
ME_COMMTMNT_REQ_RE_C Check of Commitment Relevance of Purchase Requisitions
ME_COMMTMNT_REQ_RELE Check of Commitment Relevance of Purchase Requisitions
ME_COMMTMNT_PO_REL_C Check for Commitment-Relevance of Purchase Orders
ME_COMMTMNT_PO_RELEV Check for Commitment-Relevance of Purchase Orders
ME_COMMITMENT_STO_CH BadI for checking if commitments for STOs are active
ME_COMMITMENT_RETURN Commitment for return item
ME_CIP_REF_CHAR Enables Reference Characteristics in Purchasing
ME_CIP_ALLOW_CHANGE Configuration in Purchasing: Changeability Control
ME_CIN_MM06EFKO Copy PO data for use by Country version India
ME_CIN_LEINRF2V BADI for LEINRF03 excise_invoice_details
ME_CIN_LEINRF2R BADI for CIN India - Delivery charges
ME_CHECK_SOURCES Additional Checks in Source Determination/Checking
ME_CHECK_OA Check BAdI for Contracts
Reward points if useful
Rgds,
Naren -
Using default web interface for users
I wish to use the default web interface for my users, I do not have the time to develop a custom app. I wish to get rid of the group and and mount point folders.
Please Help,
JeffCM SDK 9.0.4 (released very shortly) includes the "Web Starter Application". This is a J2EE Web Application with full MVC architecture and completely open source!
You may be able to obtain this application sooner from Oracle Consulting - it will work on the current CM SDK 9.0.3.
JSP and Tag Libraries make up the UI. The controller framework is similar to Jakarta Struts. It offers localization support, ADA compliance etc.
You can easily develop the application from JDeveloper and deploy to 9iAS.
Matt. -
User Interface for Multiple Sensors
Hi all,
I want to create an application where in i should be able to acquire data for Accelerometer, pressure, strain, LVDT and Temperature sensors. I want to create a Font Panel as shown in the attachment, i should configure any of the sensors by selecting the check box. Please find the attachment.
I created the prototype design using NI Signal Express, i am not able to customize the Step Set-up window as per my requirements(Shown in the attachment).
Any help regarding how to go about it, whether in LabVIEW or in Signal Express. I would be really glad if you any ideas.
Regards,
KM
Attachments:
LabVIEW Signal Express.vi 367 KB
User Interface for Multiple Sensors.png 115 KB
LabVIEW GUI.seproj 1156 KBYou can certainly do what you want in LV, but you all have to create the UI manually. Beyond that, this configuration dialog is just another LabVIEW program.
What exactly is the problem you are having? I can't open your code because NI still hasn't released the beta version of LabVIEW 2015 for Android.
Mike..
PS: Yes, the comment about LabVIEW 2015 is a joke! Unless of course there really is an Android version coming, in which case I just amazed myself...
Certified Professional Instructor
Certified LabVIEW Architect
LabVIEW Champion
"... after all, He's not a tame lion..."
Be thinking ahead and mark your dance card for NI Week 2015 now: TS 6139 - Object Oriented First Steps -
Making BDBG Easy (Generate ALE Interface for BAPI)
<b>Making BDBG Easy</b>
Transaction BDBG is used to generate an ALE interface for SAP standard or custom developed BAPIs. Once a BAPI is given an ALE interface, it can be used in LSMW for migrating data or just as another IDoc. Quite a few SAP standard BAPIs cannot be used in LSMW as they do not come with an ALE interface. OSS note Documentation on Transaction BDBG (note number 125776) details the necessary steps to use transaction BDBG but it does not comprehensively cover the technical issues that one may encounter in order to create an ALE interface.
BAPI_ACTIVITYCRM_CREATEMULTI, which is used to create Activities in CRM, will be used to illustrate a step-by-step approach to using transaction BDBG.
Go to Object Navigator (transaction SE80) and create a bespoke function group, we will call ours Z_CRM_ACTIVITY. Activate it.
Then go to Function Builder (transaction SE37), and copy the BAPI to a bespoke function module. Thus, BAPI_ACTIVITYCRM_CREATEMULTI is copied to Z_BAPI_ACTIVITYCRM_CREATEMULTI and assigned to the function group that we created in the previous step Z_CRM_ACTIVITY. Edit the bespoke function module, go to the Attributes tab, and release the function module (<i>Menu Path Function Module >> Release >> Release</i>). Now activate the function module.
IDoc segment types have a maximum length of 27 characters. Each associated type for the Parameters (tabs Import, Export, Changing, and Tables) in a BAPI becomes a segment in the IDoc. Thus, an associated type in a BAPI cannot exceed 27 characters. During the ALE generation process anything beyond the 27th character gets truncated. This leads to more than 1 segment being called the same, and as a result an error occurs when the ALE interface is generated in the final step as an IDoc cannot have the same segment twice.
Eg: Table parameters DATE and DATEX correspond to types BAPIBUS20001_APPOINTMENT_INS (28 characters long) and BAPIBUS20001_APPOINTMENT_INSX (29 characters) respectively.
Also, a developer does not have the option to reduce the segment name during the ALE generation process. So in order to have an error free ALE generation happening in the end, bespoke associated types need to be created and assigned to our bespoke BAPI.
Go to ABAP Dictionary (transaction SE11), and create ZXXXXXXXXXXXXXXXX data types for the structures in the BAPI that are greater than 27 characters. Activate all these bespoke structures.
Bespoke structures ZBAPIBUS20001_APP_INS and ZBAPIBUS20001_APP_INSX can be used in lieu of the standard SAP ones for parameters DATE and DATEX. The same correction method needs to take place for other excessively long types, like the types being referenced by LOCATION and LOCATIONX.
Go to Business Object Builder (transaction SWO1). A search for Activity as the short description produces a few hits. After examining all the objects returned in the hit, we see that BAPI_ACTIVITYCRM_CREATEMULTI belongs to 2 Business Objects - BUS2000110 (CRM Activity) and BUS2000126 (CRM Business Activity).
Copy either of these objects to a bespoke object ZXXXXXXXXX, we will copy BUS2000110 and rename it to ZBUS200010, program RBUS2000110 should also be copied to a Z version (ZRBUS2000110), and the object name can be changed to Company Name (eg: XXX) followed by ActivityCRM (XXXActivityCRM).
Now we edit our bespoke object, and create a method for it by placing the mouse cursor on methods in the object type tree and clicking the create button on the menu bar.
A pop-up appears on the screen with the following text
<i>Create with function module
as template? </i>
After clicking on Yes, another pop-up asks for a function module to be entered, enter the bespoke function module Z_BAPI_ACTIVITYCRM_CREATEMULTI here and click the tick button.
Accept all the default values in the next pop-up Create Method: Method Properties, and do the same for the next pop-up Create Method: Create Parameters. In the next pop-up click Yes to the question
<i>Method ZBAPIACTIVITYCRMCREATEMULTI not
yet implemented
Do you want to generate a template
automatically for the missing section?</i>
Double-click on the newly created method and go to the ABAP tab, the Function Module option will be selected as the default, make the API function as the default and click OK. Generate the business object.
Now, click on the method of the object and release the method (<i>Menu Path Edit >> Change Release Status >> Object Type Component >> To Released</i>). Double-click on the method to confirm that the Status is released.
Save all the changes made, and Back out of the Edit mode and go the main Business Object Builder screen. Re-generate the business object. First implement, then release the main object ZBUS200010 (<i>Menu Path Object Type >> Change Release Status To >> Implemented, then follow the same menu path and click on Released</i>).
Go to the BAPI Explorer (transaction BAPI), click on the filter icon on the menu bar, and select radiobutton All. Click on the alphabetical tab. Look for XXXActivityCRM in the list. Release status should be Released for this object.
Now we should be able to generate the ALE interface for the BAPI. Execute transaction BDBG, enter the bespoke object (ZBUS200010), do a drop down on the method field and select the bespoke method from the list. Click on the create button on the menu bar. In the first pop-up accept Message Type ZBAPIACTIVITYCRM and click OK. In the next pop-up the following values should be there by default
IDoc type ZBAPIACTIVITYCRM01,
ALE Outbound Processing
Function Module ZZ_ALE_ACTIVITYCRM_CREATEMULTI,
Function Group Z_CRM_ACTIVITY, and
ALE Inbound Processing
Function Module ZIDOC_INPUT_ZBAPIACTIVITYCRM,
Function Group Z_CRM_ACTIVITY.
The option Call in update task should be ticked.
Now our BAPI has an ALE Interface to it and can be used in conjunction with either the BAPI or IDoc option in LSMW. The default values for an IDoc Inbound Processing should be maintained in order to use the bespoke BAPI / IDoc.Great
-
Hello,
Can anyone tell me what inbound interface the SAR (schedule agreement release) uses? I am unable to find the inbound interface in SPROXY.
Also, any good links for implementing Schedule Agreements in SUS.
Thanks,
Mattthere is no seperate inbound interface for SAR , the purchase order inbound interface is used for creating scheduled agreement release in SUS.
only thing that differentiates between PO and SAR in SUS is the header description, descriptuon will have DELINS For SAR.
and both the documents use the function module BBP_API_SUSPO_CRT
set subtype (SR) for SA releases for SUS-MM scenario
IF ls_header_v_u-description EQ 'DELINS'.
also note that the object type for both the PO and SAR in SUS is the same and is 'BUS2230'. -
Administrative Interfaces for Adapter
Hi experts,
Can we manage the life cycle of an Adapter, i mean are there administrative interfaces for Adapter-Framework-compliant adapter?
Plz help.
Regards,
SushamaHi Jose
> Currently we have interfaces with connection problems that causes the number of threads of the adapters is at maximum
The problem is not clear in your message. be clear in following things.
1. In what kind of adapters you have this problem?
2.how frequent is this connection problem?
3.Try analyzing why this problem is coming.
there can be many reasons for this connectivity loss issue!
1. Data transfer over thirdparty network.
2. Prioritize of the data packets in the third party network (if in the 3rd party network prioritize is not done on it, by default our messages/threads will be assigned to lowest priority - so when data load is high in the network lowest priority messages gets canceled.) - this is one of major cause of data loss issue when we deal with 3rd party network.
4. If you are facing this connectivity issue File adapter please configure below properties in the adapter and do the test again.
-> Set Connection mode -->per file transfer
--> in advanced mode set "ftp.timeout" with value around 300ms.
above two will ensure that the connection thread is released after each processing. else the thread wont be released.
PS: Connection is getting terminated because earlier messages are not releasing the threads after the message processing.
please give us more input what is the scenario/adapter used, what connection error u r getting what network is it connecting to (same network or 3ed party network).
Regards,
Senthilprakash -
hello all!
has somebody implemented interface for maintenance order confirmations (time tickets) from a PDC system? our release is ECC6.0. do i create the distribution model in transaction SALE and then idoc partner profile in WE20 and thats it?
for production order confirmations i use message type PPCC2PRETTICKET for confirmations.
thank you!
matthiasHi Vadim,
Thanks for your response. Basically, in the R/3 system, when you are performing the GR in MIGO for a material master that has a serialization profile, the system will generate a Serial tab within the MIGO transaction. It is here that you enter the serial numbers of the goods that you are recieving. There is no such functionality built into the standard delivered SRM system in the confirmation transaction and I was just trying to get confirmation that a solution isnt available already from SAP to provide it within the SRM EBP system. I havent found anything in OSS.
Adam -
Does anyone know if there is an ODMA interface for iFS? if there is not such interface yet, will it be one of the features for the next release?
THXODMA is not a planned feature. We feel that WebDAV will replace ODMA.
-
Problem to deploy to a WebService interface for ADF Business Components to Weblogic Server
Hi,
I'm trying to deploy a custom application ,in which i have exposed ADF Business Components through a WebService interface, to a standalone weblogic server.
Application Module is configured with a Service Interface for ordinary ViewObjects.
Now I want to create a EAR file of this application to deploy it on the weblogic server.
But I got an error while deploying it.The error i am getting is shown below.
ERROR: No Java EE modules detected in EAR archive. Deployment aborted. == (oracle.jdevimpl.deploy.ear.WeblogicAssembler)
I have followed the steps mention in the below link :
http://technology.amis.nl/2010/12/29/quickly-creating-reploying-and-testing-a-webservice-interface-for-adf-business-components/
I'm using Jdeveloper 11.1.2.4 on windows.
Please suggest what i could be doing wrong.
Regards,
HimanshuDoes the deployment profile include Java EE modules?
Refer
Java EE Developer: ERROR: No j2ee modules detected in EAR archive. Deployment aborted. == (oracle.jdeveloper.deploy.Veto… -
Open Interface for OM to Contracts in R12
Hi,
I am facing an issue regarding with OM to Contracts interface, in R12 Warranty contracts are created with standard coverage and having no line for coverage in table OKC_K_LINES_B. Can anyone let me know how we can insert the actaul coverage line into table OKC_K_LINES_B.
Thanks,,,
Parminder S.As far as I know there is no interface for it.
Check if you can use EGO_ITEM_AML_PUB.Implement_AML_Changes.
If that does not work, you can do a straight insert into the MTL_MFG_PART_NUMBERS
The main columns are manufacturer_id , organization_id, inventory_item_id , and mfg_part_num.
Oracle validates only the first 3. And it does not allow duplicates of the first 4 columns.
Hope this helps,
Sandeep Gandhi -
Interface for Excel does not work in Windows 7 - Important
Hi,
Im using BPC 75 MS SP04 with a computer Windows 7, IE 9, Office 2007. Apparently the Excel works "fine", the issue is that whenever I try to access to Interface for web from the main page (clicking the icon) it does not work, does not do anything...
What do you suggest to do?
Working directly in excel is not a problem, accesing to templates vía "Etools - Open dynamic templates" is fine.
The issue is that users that have every access controlled by BPF's (using Interface for Web) cannot work.
Also, we use a template that uses 12 EVDRE reports in the background, we know it is a lot... but it was required like that.
Once accesing to this template vía Etools -Open dynamic template... Excel gets stuck and I have to force it to shut down.
Also Im working with a Vista system, Office 2003.
For this systems, we also use the template EVDRE (12 reports). Once any of both systems access to this specific template, Excel gets stuck and I have to shut it down. Any other template is able to work with, but these 2 machines (7 and Vista) cant.
Please help !
VelázquezHi Velázquez,
Based on SAP Note: 1603248, IE9 is not supported on BPC 7 and 7.5.
So you have to revert to IE8.
Only IE8 and IE7 are supported in 7.5 MS.
Hope this helps.
Karthik AJ
Maybe you are looking for
-
Windows bottom corner left and right edges are not rounded
Hello, I have an issue with my macbook pro retina 13inch. The left and right bottom corner are not rounded like they are supposed to be, I can see the pixel. They do not always appear so it is not a display problem (dead pixel) but a software problem
-
Bugs in Safari 5.0.1
Safari 5.0.1 bugs on Windows XP SP3: - Bookmarks flash when you move the mouse to bookmark folders. - Images flash on screen as they are loading; looks like garbage on the screen until the image starts loading (random dots over the browser window). A
-
Data Selection is disabled in Infopackage
Hello Friends, I am facing a small problem. I want to pull data for an infosource 2LIS_05_UDN. Now there are already infopackages existing for the infosource, but it is not allowing me to select date range, the data selection is disabled. How do i g
-
Feature request: info about executed sql in error case
Hi, I'm running into this problem over and over again: when an exception happens on the productive server I would really like to see the sql statement that caused it. Or the whole batch of statements generated by unitOfWork.commit. Whatever is possib
-
A novel idea regarding RAW conversion
With the much debate about Aperture and ACR and RAW conversion, I had this thought: RAW conversion is really part of the image editing process, not part of cataloguing, selection, organization, or required for producing thumbnails. I'm not exactly su