Interface for Excel - Error

HI,
When i am trying to open Interface for Excel from BPC Admin, Getting below error "Error HRESULT E_FAIL has been returned from call to a COM Component"
Any idea how to solve this issue?
Thank you in advance

ITs working fine now...but not sure what fixed the problem;

Similar Messages

Interface for Excel does not work in Windows 7 - Important

Hi,
Im using BPC 75 MS SP04 with a computer Windows 7, IE 9, Office 2007. Apparently the Excel works "fine", the issue is that whenever I try to access to Interface for web from the main page (clicking the icon) it does not work, does not do anything...
What do you suggest to do?
Working directly in excel is not a problem, accesing to templates vía "Etools - Open dynamic templates" is fine.
The issue is that users that have every access controlled by BPF's (using Interface for Web) cannot work.
Also, we use a template that uses 12 EVDRE reports in the background, we know it is a lot... but it was required like that.
Once accesing to this template vía Etools -Open dynamic template... Excel gets stuck and I have to force it to shut down.
Also Im working with a Vista system, Office 2003.
For this systems, we also use the template EVDRE (12 reports). Once any of both systems access to this specific template, Excel gets stuck and I have to shut it down. Any other template is able to work with, but these 2 machines (7 and Vista) cant.
Please help !
Velázquez

Hi Velázquez,
Based on SAP Note: 1603248, IE9 is not supported on BPC 7 and 7.5.
So you have to revert to IE8.
Only IE8 and IE7 are supported in 7.5 MS.
Hope this helps.
Karthik AJ

Regd: BEE Spreadsheet Interface for Excel 2007

Hi All,
After accesing the BEE Spreadsheet Interface function it prompts me to download file. After allowing the download file.. it opens up an excel sheet prompting for WEB_ADI[1].xls to be downloaded on the system.
the it says Processing: Create Document. Your document is being created. Do not close this window until processing completes.
The excel sheets gets struck at this point. it does not download the file..
I have also changed the Excel 2007 Trust center options and enabled Trust access to VBA objects and Enable all macros.
My profile options are set as
BNE UIX Base Path : /OA_HTML/cabo/
BNE UIX Physical Directory : /u02/oratrng/trnmlgappl/html/cabo/
Can someone guide if i am still missing any setups or options..................
Thanks in advance,
Prashanth

Hi,
OK fine the sheet got dowloaded now.. But after that i am facing a new problem ..after i enter the details in Excel and try ot upload thm it gives me error : Connection to the server is unavialable. This is a common error, so please check the BNE.log file for details about the error.
You may also review these documents and see if any is applicable.
Note: 553134.1 - The Connection To The Server Is Unavailable When Uploading Journals From Webadi
Note: 553851.1 - Webadi Upload Fails In RAC Environment; Message: The Connection To The Server Is Unavailable
Note: 394680.1 - Error -The Connection to the Server is Unavailable When Upload Web ADI - Interface Columns Integrator
Note: 361944.1 - The Connection To The Server Is Unavailable When Uploading Journals From WebADI
Note: 334632.1 - Web ADI Create Document Fails - Connection to The Server is Unavailable Error on Worksheet
Note: 419995.1 - WebADI Upload ''Connection To The Server Is Unavailable'' While Uploading
Note: 428643.1 - CONNECTION TO SERVER ERROR DURING UPLOAD OF MORE THEN 144 LINES
Note: 847091.1 - Error 'The Connection To The Server Is Unavaiable' when Uploading WEB ADI Document
Note: 359584.1 - Webadi Cannot Upload Adi Spreadsheet (The Connection To Server Is Unavailable.)
Note: 329926.1 - BNE.D Web ADI Letters Fail to Export Download is an Empty Document - Spreadsheet
Note: 271811.1 - Connection Unavailable Error Occurs When Uploading Files In Web Adi
Regards,
Hussein

Interfaces for Search Error List Windows.

Hi,
I have developed the application as a plugin to visual studio.
Now i want to implement the search filter in error list window. In search filter we have three options namely open documents, current project, current document.
I want to provide the implementation for all the filter options.
For that i need interfaces to implement.
Could you please provide necessary details on this.
Regards,
Punitha

Hi Punitha,
Try
ErrorListProvider, this thread should give you some helpful ideas:
How to add parsing errors to ErrorList window?
Also please read Carlos' article about the ErrorList:
HOWTO: Add an error with navigation to the Error List from a Visual Studio add-in
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Format Time Stamp String for excel error

Hi all,
I am currently trying to format the time stamp from labview to excel, in an excel recognizable format. Ive attached a photo of that part of the vi. The time stamp is formated correctly when it leaves the format time stamp block and after it leaves the build array block, but when it is written to excel file it is formated in what looks like a standard format and excel does not recognize this as a time stamp.
Any ideas to fix the issue?
Thanks
Attachments:
Time stamp.PNG ‏7 KB

The Example Finder has a few ActiveX examples I think one uses Excel.
Also if you have the Report Generation Toolkit I think this is what you need
http://digital.ni.com/public.nsf/allkb/38D7104644E0F7A5862578B1001A86C5
It sets the cell format to be how you want. The default for a timestamp is "m/d/yyyy h:mm".
BUT I just think I have an easier solution. The problem is it correctly detects that this is a time stamp, but the cell format is incorrect. If we convince it that it is a string it will look right and I assume that's all that matters. So add a space to the front of your time, so have the format be " %Y-%m-%d %H:%M:%S" (notice the space) and I think it will look the way you want because Excel thinks it is a string.
Unofficial Forum Rules and Guidelines - Hooovahh - LabVIEW Overlord
If 10 out of 10 experts in any field say something is bad, you should probably take their opinion seriously.

Table Interface for Excel report?

I have been working with the nice feature of MODIFY_TABLE in web tables. It is very usefull to alter the table to more specific needs.
Now my question: is there a possibility to modify classes so that you can adapt the table before it is shown in an excel sheet?
Thank you in advance!
Bart

Hi Deepak,
I was already thinking in 'my solution': starting from an Excel workbook that opens a web report, searches the result table and transforms this table into the Excel sheet.
1° Opening an url in Excel.Tis is possible in Excel. So in worst case we have to use string operations to filter the result tabel in the web page and transform a html table into an Excel tabel.
2° Layout of the html table When we want the current status of the report (with drill down and things like that), we should first make a bookmark. Then we can use this bookmark as url to open the web page in Excel. -> layout and current drill status can be imported from HTML into Excel.
3° authorization. As the url will open a web page on the WAS server, the user will have to provide a username and password. So this problem is also 'solved' because the authentication is done by the server.
Concerning the "Print with Excel" method...
1° If I am right, changes made by JavaScript do not effect the exported Excel report as JavaScript is client side, so the server (the instance that generates the excel) is not aware of the changes made by JS. Right or do I forget something?
2° My biggest concern is the use of xslt in the html code. This is not very handy for people who are not familiar with html. Besides, not all the changes I make in the xslt have effect on the result (for example: when the printed table takes more than one table, the column headers are not repeated on every page, at least not in a dynamic way). But maybe it is a mistake from my side
When I would work with an Excel workbook that takes an url and creates the report itself by extracting the data, extra macro's could be added (I think this is not possible by using xslt or Office HTML)
Thank you for you comments Deepak!

BPC NW 7.5 Excel Error

Hi,
When I click on Interface for Excel, I get an error "OBJECT LIBRARY INVALID OR CONTAINS REFERENCES TO OBJECT DEFINITIONS THAT COULD NOT BE FOUND"
Kindly advise
Thanks

Hi,
Please uninstall & re-install both admin & client tools once.This will solve your error
Regards
CSM Reddy

Interface for Web

Hi,
We are using SAP BPC 7.5 NW SP08(admin and client). We have created a new user called SALES_UAT form the BPC frontend by importing the user from the Adtive Directory. We have assigned the relevant task profiles and also member access profiles to that new user. We can log-in to the Interface for Excel using that user SALES_UAT.
But when we are clicking on the Interface for Web it is asking for the relevant username and password. We are giving Username as SALES_UAT and the relevant password. But even if we give the correct username and password it is logging into Interface for Web as BPC_SYSADMIN.
Do we need to give other access to the new user SALES_UAT so that he can log into Interface for Web?
Thanks,
Appu

Hi Appu,
Please check if you have given correct access to the user specially in task profile. Also delete cookies and history from the internet page and try logging once again.
Hope this works.
Rgds,
Poonam

Error in running a function to convert coordinates in degrees to decimal for EXCEL VBA

For your information, I have 3 cross-posts regarding this question - and all I can said there is still no firm solution regarding this error.
1) http://stackoverflow.com/questions/27634586/error-in-running-a-function-to-convert-coordinates-in-degrees-to-decimal-for-exc/27637367#27637367
2) http://www.mrexcel.com/forum/excel-questions/826099-error-running-function-convert-coordinates-degrees-decimal-excel-visual-basic-applications.html#post4030377
3) http://www.excelguru.ca/forums/showthread.php?3909-Error-in-running-a-function-to-convert-coordinates-in-degrees-to-decimal-for-EXCEL-VB&p=16507#post16507
and the story of the error is as below:
Currently I am working on VBA excel to create a widget to verify coordinates whether it lies under the radius of ANOTHER predefined and pre-specified sets of coordinates.
In the module, I want to convert the coordinates from degrees to decimal before doing the calculation - as the formula of the calculation only allow the decimal form of coordinates.
However, each and every time I want to run the macros this error (Run-time error '5', invalid procedure call or argument) will appear. Then, the debug button will bring me to below line of coding:
degrees = Val(Left(Degree_Deg, InStr(1, Degree_Deg, "°") - 1))
For your information, the full function is as below:
Function Convert_Decimal(Degree_Deg As String) As Double
'source: http://support.microsoft.com/kb/213449
Dim degrees As Double
Dim minutes As Double
Dim seconds As Double
Degree_Deg = Replace(Degree_Deg, "~", "°")
degrees = Val(Left(Degree_Deg, InStr(1, Degree_Deg, "°") - 1))
minutes = Val(Mid(Degree_Deg, InStr(1, Degree_Deg, "°") + 2, _
InStr(1, Degree_Deg, "'") - InStr(1, Degree_Deg, "°") - 2)) / 60
seconds = Val(Mid(Degree_Deg, InStr(1, Degree_Deg, "'") + _
2, Len(Degree_Deg) - InStr(1, Degree_Deg, "'") - 2)) / 3600
Convert_Decimal = degrees + minutes + seconds
End Function
Thank you.
Your kind assistance and attention in this matter are highly appreciated.
Regards,
Nina.

You didn't give an example of your input string but try the following
Sub test()
Dim s As String
s = "180° 30' 30.5""""" ' double quote for seconds
Debug.Print Deg2Dec(s) ' 180.508472222222
End Sub
Function Deg2Dec(sAngle As String) As Double
Dim mid1 As Long
Dim mid2 As Long
Dim degrees As Long
Dim minutes As Long
Dim seconds As Double ' or Long if only integer seconds
sAngle = Replace(sAngle, " ", "")
mid1 = InStr(sAngle, "°")
mid2 = InStr(sAngle, "'")
degrees = CLng(Left$(sAngle, mid1 - 1))
minutes = CLng(Mid$(sAngle, mid1 + 1, mid2 - mid1 - 1))
seconds = Val(Mid$(sAngle, mid2 + 1, 10)) ' change 10 to 2 if only integer seconds
Deg2Dec = degrees + minutes / 60 + seconds / 3600
End Function
As written the function assumes values for each of deg/min/sec are included with unit indicators as given. Adapt for your needs.
In passing, for any work with trig functions you will probably need to convert the degrees to radians.

"Authorization error" while accessing Multiprovider in Analysis for excel tool

Hi,
We are using "Analysis for excel" 1.4 version. My users are executing all queries out of any MP with out any issue. But while accessing Multi Provider in "Analysis for excel" tool they are geeting "Authorization" error. Any suggestions please.
Thanks,
Deepa.

Hi Deepa,
I'm facing the same problem, which basically is no issue but expected behaviour?!
Reason: When allowing access on Multiproviders via queries you probably restrict the data selection with authorization variables, where users have to select characteristics they are allowed to see.
In that way, you prevent that users can see data for which they are not authorized.
Finally, if the direct selection via Multiprovider was allowed without any restriction, your whole authorization concept would be for the birds :-)
In my case, I wanted to give users just an overview of the "last update dates" of several infocubes:
=SAPGetSourceInfo("DS_1"; "DataSourceName")
=SAPGetSourceInfo("DS_1"; "LastDataUpdate")
(... we all know that Multis can display only the oldest load date of any of all Cubes below....)
I even deleted the cross-tabs, and kept only the reference to the DS_x ... But still, when users try to refresh the data sources they are not even allowed to select pure technical Cube Information :-/
Regards, Martin
PS: If anyone else has a different idea as solution to my problem, just let me know :-)

Errors for excel - excel service unavailable. Event Viewer has error event ids - 5239 and 5231.

Errors for excel - excel service unavailable. Event Viewer has error event ids - 5239 and 5231.
We restart the excel service app and it solves. Looking for permanent solution.
Regards,
Kunal

To resolved the issue do a simple restart.
Restart the server
Before restarting, verify that this problem occurs often. It may be an intermittent problem that is automatically corrected and does not require you to restart the server.
If the problem occurs often, restart the server running Excel Services Application.
If the problem continues to occur often, and restarting the server did not correct the problem, confirm that the hardware of the server is functioning correctly, or reinstall Excel Services Application and re-add the server to the server farm.
Here's the article with the explanation: Error communicating with Excel Services
Application - Events 5231 5239 5240
Please 'propose as answer' if it helped you, also 'vote helpful' if you like this reply.

Error when trying to email report using Analyzer for Excel template

I have a report for which I have created both "RTF" and "Analyzer for Excel" based templates. I can email the report using the RTF template, but when I try to email it using the A4E template (using the 'Send' button from the report screen), it never arrives. If I schedule the report to be emailed, it fails, and I get the following error information:
oracle.apps.xdo.servlet.scheduler.ProcessingException: oracle.apps.xdo.servlet.data.DataException: Invalid format requested: html
     at oracle.apps.xdo.servlet.scheduler.XDOJob.generateReport(XDOJob.java:959)
     at oracle.apps.xdo.servlet.scheduler.XDOJob.execute(XDOJob.java:404)
     at org.quartz.core.JobRunShell.run(JobRunShell.java:195)
     at org.quartz.simpl.SimpleThreadPool$WorkerThread.run(SimpleThreadPool.java:520)
Caused by: oracle.apps.xdo.servlet.data.DataException: Invalid format requested: html
Ideas?

HI,
Is this qury is running fine in SQL?? Have you checked this query in Sql server(Management studio) whether working or not??.
I feel there is some mismatch with relations in query.. Cross check your query once in SQL itself. once it is running well, we will take a look.
Regards,
Salah.

Analyzer for Excel-Java heap space error

When I click on Analyzer for Excel for a report I get the error java.lang.outOfMemoryError:java heap space.
Does anyone know how to increase the JVM heap space?
Thanks,
Krishna.

When I click on Analyzer for Excel for a report I get the error java.lang.outOfMemoryError:java heap space.
Does anyone know how to increase the JVM heap space?
Thanks,
Krishna.

Error in Interface for management of HTTP destinations

Hello Experts,
I've go the following error when i'm trying to create a logical port in SOA Manager.
'Error in Interface for management of HTTP destinations'.
I was trying to create a logical port of type WSDL for a consumer proxy, with a URL provided by the EP consultant.
Kindly let me know how can i rectify the above stated error.

Hi
Did you try creating the connection via sm59 (RFC Destination), then try to assign it (instead of direct URL call, specify the RFC destination). That way, you can trace the RFC destination.
Regards
Ronny

Creating an Interface for a class: error

Hi there,
I'm new to Java as you'll see from the question.
I created a class "Bicycle" and then went on to create an interface for it "InterBicycle" only I get the following error:
bad class file: C:\Documents and Settings\Melanie\Bicycle\src\bicycle\InterBicycle.java
file does not contain class bicycle.InterBicycle
I checked in the bicycle folder and the "InterBicycle.java" file is there.
Does anyone know where I am going wrong?
Butterfly82

Hey, thank you for that petes.
Silly mistake on my part, I was just reading about Inheritance and then went on to reading about Interfaces.
Changing this I came up with another error for each of the methods implemented by Bicycle.java:
C:\... applyBreaks(int) in bicycle.Bicycle cannot implement applyBreaks(int) in bicycle.InterBicycle; attempting to assign weaker access privileges; was public
Here is the code I have (Taken from The java Tutorial):
package bicycle;
class Bicycle implements InterBicycle {
    int cadence = 0;
    int speed = 0;
    int gear = 1;
    void changeCadence(int newValue) {
        cadence = newValue;
    void changeGear(int newValue) {
        gear = newValue;
    void speedUp(int increment) {
        speed = speed + increment;
    void applyBreaks(int decrement) {
        speed = speed - decrement;
    void printStates() {
        System.out.println("Cadence: " +cadence+ " Speed: " +speed+ " Gear: " +gear);
package bicycle;
interface InterBicycle {
    // List of the methods that the Bicycle class holds/implements
    void changeCadence(int newValue);
    void changeGear(int newValue);
    void speedUp(int increment);
    void applyBreaks(int decrement);
}

Interface for Excel - Error

Similar Messages

Maybe you are looking for