Interface frozen with images loaded with Loader()

Hi all,
I am trying to create a web app that allows the user to load an image from a local folder and process it with some image processing. I was able to do that with FileReference and Loader.
I am using an asynchronous shader to process the image and it seems that when the image is loaded locally the interface is locked out for a second or so before showing the result. However, if the image is embedded this does not happen and the image is updated instantly with the result.
I don't really understand why an image loaded with a loader has this lag and an embadded image does not... Can anyone help?
Thanks.

Everything was already done
100 fullduplex autoneg to false :
# for i in `ndd /dev/hme \? | grep "read and write" | awk '{print $1}' ` ; do
echo $
ndd /dev/hme ${i}
done
ipg1
8
ipg2
4
use_int_xcvr
0
pace_size
0
adv_autoneg_cap
0
adv_100T4_cap
0
adv_100fdx_cap
1
adv_100hdx_cap
0
adv_10fdx_cap
0
adv_10hdx_cap
0
instance
0
lance_mode
1
ipg0
16
$ netstat -k hme0
hme0:
ipackets 172970 ierrors 77 opackets 106192 oerrors 0 collisions 0
defer 0 framing 36 crc 41 sqe 0 code_violations 0 len_errors 0
ifspeed 100000000 buff 0 oflo 0 uflo 0 missed 0 tx_late_collisions 0
retry_error 0 first_collisions 0 nocarrier 0 nocanput 0
allocbfail 0 runt 0 jabber 0 babble 0 tmd_error 0 tx_late_error 0
rx_late_error 0 slv_parity_error 0 tx_parity_error 0 rx_parity_error 0
slv_error_ack 0 tx_error_ack 0 rx_error_ack 0 tx_tag_error 0
rx_tag_error 0 eop_error 0 no_tmds 0 no_tbufs 0 no_rbufs 0
rx_late_collisions 0 rbytes 199140046 obytes 6676272 multircv 231 multixmt 0
brdcstrcv 1057 brdcstxmt 42 norcvbuf 0 noxmtbuf 0 newfree 0
ipackets64 172970 opackets64 106192 rbytes64 199140046 obytes64 6676272 align_errors 36
fcs_errors 41 sqe_errors 0 defer_xmts 0 ex_collisions 0
macxmt_errors 0 carrier_errors 0 toolong_errors 0 macrcv_errors 0
link_duplex 0 inits 5 rxinits 0 txinits 0 dmarh_inits 0
dmaxh_inits 0 link_down_cnt 0 phy_failures 0 xcvr_vendor 24657
asic_rev 193 link_up 1
So what do you have any idea, about the problem?
The router is 100 Full Duplex w/o autoneg
the errors arrived only on the virtual interface hme0:1, and never on hme0
Fred,

Similar Messages

PDF's with images open with dark (mask) overlay..not true in Explorer...how to change setting?

When browsing in Firefox, some links to PDF's that I open, those with images, open with a dark mask overlay. I have have searched around in the VIEW menu with no luck. This does not happen when I open the same PDF links in Windows Explorer so it must be Firefox setting that I need to change. By the way, I have Adobe Creative Suite 4 installed on my computer.

When browsing in Firefox, some links to PDF's that I open, those with images, open with a dark mask overlay. I have have searched around in the VIEW menu with no luck. This does not happen when I open the same PDF links in Windows Explorer so it must be Firefox setting that I need to change. By the way, I have Adobe Creative Suite 4 installed on my computer.

How to load folder with images php with oracle

Hi i want to upload from my php form folder with images what should i fix in my php code for 1 image?
<?php
define("ORA_CON_UN", "obrazy");
define("ORA_CON_PW", "miksas1");
define("ORA_CON_DB", "//localhost/orcl");
if (!isset($_FILES['lob_upload'])) {
?>
<form action="<?php echo $_SERVER['PHP_SELF']; ?>" method="POST"
enctype="multipart/form-data">
Image filename: <input type="file" name="lob_upload">
<input type="submit" value="Upload">
</form>
<?php
else {
$conn = oci_connect(ORA_CON_UN, ORA_CON_PW, ORA_CON_DB);
// Insert the BLOB from PHP's tempory upload area
$lob = oci_new_descriptor($conn, OCI_D_LOB);
$stmt = oci_parse($conn, 'INSERT INTO FOTKI (FOTKAID, FOTKA) '
.'VALUES(:MYBLOBID, EMPTY_BLOB()) RETURNING FOTKA INTO :FOTKA');
oci_bind_by_name($stmt, ':MYBLOBID', $myblobid);
oci_bind_by_name($stmt, ':FOTKA', $lob, -1, OCI_B_BLOB);
oci_execute($stmt, OCI_DEFAULT);
// The function $lob->savefile(...) reads from the uploaded file.
// If the data was already in a PHP variable $myv, the
// $lob->save($myv) function could be used instead.
if ($lob->savefile($_FILES['lob_upload']['tmp_name'])) {
oci_commit($conn);
echo '<p>Obrazek załadowano</p>';
else {
echo "Couldn't upload Blob\n";
$lob->free();
oci_free_statement($stmt);
oci_close($conn); // log off
?>

The first thing I'd suggest you fix is the forum to which you posted the question.
The name of this forum is "Oracle Database General Questions." That is questions about the database ... not questions about PHP.
Look further and you will find the correct forum.

Why can I not get a pdf with images work with quick look in the ipad

Why can I not use the Quick Look function when I view a pdf with images, on my Ipad?

Try install the free Adobe Reader app
http://itunes.apple.com/sg/app/adobe-reader/id469337564?mt=8&ls=1

Bug with Image Sequence ( not loading/using all files ) for time lapse creation

Hello everybody!
PhotoShop CC 2014
I am looking to create a time lapse out of 240 still photos that I took with my DSLR, but I am facing what probably is a bug, or a mistake on my part.
I have all the photos in JPEG format with proper naming & sequential numbers ( DSC001 to DSC240 ).
I'm creating a new document, selecting Film & Video, then by using the Layer -> Video Layers -> New Video Layer from file... and selecting the first image of the sequence I load the photos.
Since the output is 1080p, and my photos are captured at 24MP, I convert them to a Smart Object as requested by photoshop when trying to resize them to fit them in the 1080p resolution.
I then set the time lapse frame rate to 24fps and when I proceed to Render the video, in the Render Video dialogue, the frames to be used in the "Range" section are less than the frames that I've got.
Instead of 240, it shows 219.
I have the "Allow Frame Skipping" option unchecked of course
Your help is really appreciated!

I've been using this method:
How to Pan and Zoom Video in Photoshop CS6 | The Complete Picture with Julieanne Kost | Adobe TV
But, I'm going to give yours a go later on, cheers

Help with image clipping with FCP 7 video filters

Hi there,
     I'm working with an image with text (one jpeg, the other psd), and when I apply a video filter (glow, bloom, or the like) that extends the outside of the image, it clips the edges.
     I've tried expanding the area around the image in photoshop before I import to FCP, but the layer still hugs the image.
      Is there a way to use the effects without clipping the edges?

The question was; "Are the still images the same pixel dimensions as your Sequence in FCP?"
Your Sequence in FCP has pixel dimensions. In SD it would probably be 720x480 or 720x486. In HD it could be 1280x720 or 1920x1080. Your still images also have pixel dimensions that could be any number at all. What I am asking is if the image pixel dimensions are at least the same or larger than your Sequence pixel dimensions.
-DH

Problem with image resolution with larger screen size

I was working on Basic Lens Sample (Basic
Lens Sample) for windows phone 8 App. In this the camera by default sets to default highest resolution.
Just had couple of questions on this:
1.) How to change basic settings like resolution,ISO etc.,in this app, because during initial settings
it only takes default value and when I try to change that it throws an error. Also a code comment is written during initialization of camera to take only these default values. So when to change these settings and how?.
2.) How to adjust resolution for phablets having 6" screen. Like when I run the code in Lumia 1320,
the image resolution is not that good and it breaks. So how to adjust screen resolutions for catering different smartphones with different resolutions and screen sizes.
Any solution or suggestions or snippets is very much appreciated.
Thanks In Advance.

Hello,
For you first question, we can use
GetAvailableCaptureResolutions method of PhotoCaptureDevice to get the available resolutions in device. That code sample returns the largest resolution by default, you just need to choose an appropriate one. You can find it in CameraController class in
Models folder in the project.
For you second question, I tested the sample in lumia 1320, I didn’t see the image broken.
>> So how to adjust screen resolutions for catering different smartphones with different resolutions and screen sizes.
You can get an appropriate resolution image and let the OS downscale it for you. You can find the support resolution in the following link. Go to Supported resolutions section.
http://msdn.microsoft.com/en-us/library/windows/apps/jj206974(v=vs.105).aspx.
If you want to display the whole large resolution image in lower resolution device, I think you can use
ScrollViewer control. Use Application.Current.Host.Content.ActualWidth and ActualHeight properties to get the device resolutions, and then you can know if your app is running on a lower resolution device.
Regards,
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place. Click HERE to participate
the survey.

Issue with Image Capture with Lion

I have a Lion. My camera is a Nikon D700
I have Lightroom 3 and Lightroom 4
Recently downloaded Lightroom 4.1 connected my memory card reader to upload photos . Lightroom 3 opens and not Lightroom 4 to import the photos.
Checked Image capture application to change preferences - there is no preferences in image capture (Lion) My scanner is the only device that is shown.
Please advise how I change for image capture to open the correct Lightroom version.
thank you
Suer

Hi Frank
I have a Lexar card reader - being using it for years no problem -
I have again gone into image capture have notice the camera import process. I never had previously hat to worry about Image capture as my photo import ran smoothly with Lightroom 3 opening up automatically.
In Image capture there are options to where the photos need to be imported to. Only iPhoto option provided no Lightroom - Under "other" I typed in Lightroom 4.
However, the import process began without Lightroom 4 opening and the photos started to be imported in to the pictures folder ( this I do not want to happen) as I want Lightroom 4 to open .
However, there is no option to change from pictures folder - there is no option for Lightroom 4 , were it says "other: can I change to Lightroom 4?
As Lightroom option is not given , I chose "other" and inserted Lightroom 4 . When attaching my card reader , Lightroom 4 did not open to import only the pictures folder. Please confirm that I need to change to import to Lightroom 4 instead of the pictures folder. _
If this is so must I change the option from other to Lightroom 4 , even though I have already indicated " connecting this camera to....... see attachment.
Also I see there is an option to tick " delete after import" must this be checked?
See attachment
I have not attached the screen shot as in the reply window there is no option to do this

How to concatenate the values in single row with images or colours

hi all,
i am apex 4.2,
i tried to execute a plsql query for the values concatenate two values into same column
example in my table
i am having teachers list one can teach two or three subjects
in table i am saving like
teacher_id teacher_name salary subjects
1 ram 5000 science,maths
2 gang 4000 maths,science,english
but my report should come like
teacher_id teacher_name salary subjects
1 ram 5000 science maths i have to highlighting these subjects with images or with different colors
2 gang 4000 maths english science
can any one help me please
thanks & regards
pavan
Edited by: Pavan on Apr 9, 2012 4:15 AM
Edited by: Pavan on Apr 9, 2012 4:22 AM

First of all, i would split the subjects column.
If you for sure only need up to 3 subjects, you could make three columns subject1, subject2, subject3.
If you may have an indefinite number of subjects for each teacher, you might create a detail-table with the subjects for each teacher.
I also would create a list of values for the subjects, either based on static values or based on another table with the subjects allowed.
Now that the subject-names are fixed you could create a subject-image for each subject, named as the subject itself. Then you "construct" the image for each subject as
<img src="#APP_IMAGES##SUBJECT_NAME#.png"/>

How to use recursion with images

Ok, for this program I'm trying to recursively repeat an image 3 times with varying widths and heights, and I don't know how to do that with images. With rectangles and other shape objects it's easy because all I had to do was override the draw method, but with images I'm not sure what to override to allow me to repeat the drawing of it with a different height and width. Any help would be greatly appreciated.

Would I be able to work that in with recursion? Currently I have a JPanel with the paintComponent method being overridden, and I've tried setting up the paintComponent method to call itself to repaint the image, but I've realized everytime I resize the application's window paintComponent gets called again making the images go out of site. Is there a way to override the drawImage method to allow me to change the width and height of the image without causing the panel to repaint itself?

Problem with image multiplication

Hi,
I am working on an image processing application and I have a problem with multiplacation of image. I use an autothresholding function to get a binary image. After thresholding I want to superimpose binary image with image taken with a traditional camera. The problem is that I need to multiply every pixel value of the binary image by 255 to get proper results of image fusion. To multiply image I used IMAQ multiply function which seems to work properly. After multiplication I need to convert image to array, so I used imagetoarray function. Unfortunately I don't get proper values after this operation - all array values are 0. I appreciate any help with this problem.
I attached the vi with added a comment next to the conversion function.
Attachments:
Image Fusion-single_image_ver3.vi ‏84 KB

I'm not sure if this is the problem, as I've only done a little image manipulation. I believe that, by default (unless you specify otherwise), images are U8 gray-scale quantities. If you multiply a U8 by 255 (Sgl) and express the result as a U8, the result will be 255 for all values except 0 (when it will be 0).
Does your thresholded image autoBthreshold 4 image look all black (or white -- I can't remember which color = 255)? If so, then your code is "doing what you told it to do", which might not be the same thing as "doing what you want it to do" ...

Printing Buttons with Images

In my application, I am attempting to print a document that has both buttons with text and buttons with images, along with plain text.
When I print, the buttons with the images are larger than they ought to be (i.e. they don't fit within the area they were suppose to be drawn within (btw, for this application, I am using absolute positioning)).
However, this does NOT occur with the buttons that have only text and no image.
Can anybody tell me why this might be? It seems that to printing a JButton comes from the functionallity of JComponent.print, which simply sets a few printing flags and calls JComponent.paint.
So whatever changes those flags make, I would think they ought to effect all buttons the same?
Has anybody else run into this problem, and possibly found a solution for it?

myJButton.setSize(new java.awt.Dimension(<width>,<height>));
that line should do it. keep in mind that that will not resize your image. since you are using absolute positioning I will assume your button is of constant size. you should manually resize your images to be of the proper size for your buttons.

I've updated and restored my ipod touch. But when i turn it on, it stays frozen on the screen with the apple icon and the loading bar. How do i fix it?

I went to update my ipod touch and it said it may take an hour. so i left it plugged in over night. in the morning the ipod was frozen. it had the apple logo and the loading bar. i reset the ipod and it stays at the same screen. i just restored it, reset it again, and restart my computer, but everytime it turns on it stays on that screen with the logo and loading bar. how do i fix it?

Were all the apps bought under the same Apple ID? For example if a husband and wife share the same computer but have different apple ID's what he buys won't play on her iPad and vice versa. However if they shared the same Apple id for both devices then any compatible apps would transfer and work on both.

Images are not loading/not loading completely, persona previews no longer works with scrollover - even after complete uninstall/reinstall, but images work in IE - suggestions on how to fix this??

Images on websites often do not load or load incorrectly/incompletely load even after refreshing page and clearing caches. Often have to "clear recent history" 5 or 6 times within a single firefox session to get working links, images, completely loaded pages. The persona previews no longer do an "automatic preview" with a scroll over and now i no longer even get an image on the page to scroll over (images are just NOT THERE). I have done the safe mode test, have updated everything suggested, have checked all add ons as suggested in the troubleshooting guide and NOTHING shows as being a problem. I even did a complete uninstall and reinstall and it is STILL not working. Worried that it was an issue with my computer, i checked the pages in IE, and they worked PERFECTLY. I am uncertain what to do now. It started as a problem once or twice a week, and now it is EVERY time i bring up Firefox. Help?

the second article did offer a suggestion that SEEMS to have helped ::crosses fingers:: - an about:config, resetting of the preferences for images. we'll see how long it lasts. THANK YOU SO MUCH for the suggestion, the article wasn't one i'd found while searching for troubleshooting info.
Java script is enabled, but the persona's stuff still isn't working. dang it. WELL, one thing seems to work now, at least. thank you.
Pax, km

Issues with images in Yosemite (Can't load images correctly)

I have been experiencing a weird behavior in Yosemite (10.10.1), related to opening images of any kind in most of my programs in my MacBook pro 15" (Late 2011). Images would not load correctly, showing a bizarre pattern of black stripes (example image attached). This is happening in Mail, Preview, Firefox, Safari; pretty much in all kinds of software that is able to open images (except photoshop, illustrator and iPhoto that I tested as well). Even with jpg, png, tiff, or pdf images. If I copy the image and paste it in Pages or other software, then the picture is revealed correctly. It seems to be stochastic, as some pictures will open correctly while others don't.
Just as a comment, the only different thing I did before this issue was to install iPhoto (Version 9.6).
Thanks in advance.

Hi Bett,
I don't know where else you have looked for help, but these links may be useful.
http://support.apple.com/kb/HT4168 "Creating ePub files with Pages"
which has a link to:
https://discussions.apple.com/article/HT4168#
which is an Apple Support Community "Creating ePub files with Pages".
Regards, Ian.

Interface frozen with images loaded with Loader()

Similar Messages

Maybe you are looking for