Interface goes down with mds9140
Hi
I've a problem with both MDS 9140. The fc interface goes down and don't go up when I reboot a device connected to them with a fiber. To solved the problem I need to remove the gbic and plug it back again. I use the following version of software
Software
BIOS: version 1.0.8
loader: version 1.1(2)
kickstart: version 1.2(1a)
system: version 1.2(1a)
Fabrice
It is probably a software defect where if a port is up for over 248 days, Once link is lost, it will not come back w/o a shut/no shut or manual intervention as you describe. This issue is resolved in the 1.3.4b and above code. For a 91xx, this would be a disruptive upgrade. Or, simply issue a shut/no shut on an affected port and you'll be good for another 248 days.
Similar Messages
-
Weblogic - 1g- Application servers are going down with lot of struck threds
Hi All,
We are seeing issue with one of the non prod server, as soon as we start the server we see lot struck threads in logs and server console is opening veryslowly after some time application server is going down. Please see the few logs in TD.
[2012-07-10 06:14:08,063] [ICOG802944407]:FirmSaleOrder: [DEBUG] <[STUCK] ExecuteThread: '5' for queue: 'weblogic.kernel.Default (self-tuning)'> <SAXOutputter> SAXOutputter.characters ['>']
[2012-07-10 06:14:08,063] [ICOG802944407]:FirmSaleOrder: [DEBUG] <[STUCK] ExecuteThread: '5' for queue: 'weblogic.kernel.Default (self-tuning)'> <SAXOutputter> SAXOutputter.characters ['666642']
[2012-07-10 06:14:08,063] [ICOG802944407]:FirmSaleOrder: [DEBUG] <[STUCK] ExecuteThread: '5' for queue: 'weblogic.kernel.Default (self-tuning)'> <SAXOutputter> SAXOutputter.characters ['<']
[2012-07-10 06:14:08,063] [ICOG802944407]:FirmSaleOrder: [DEBUG] <[STUCK] ExecuteThread: '5' for queue: 'weblogic.kernel.Default (self-tuning)'> <SAXOutputter> SAXOutputter.characters ['/lSO']
'weblogic.kernel.Default (self-tuning)'> <JMSEventRouter> This message has been tried for first time
[2012-07-10 06:14:07,878] [ICOG802937073]:VideoResponse:Warning [DEBUG] <[STUCK] ExecuteThread: '95' for queue: 'weblogic.kernel.Default (self-tuning)'> <NSStack> NSPop (32)
[2012-07-10 06:14:07,877] [ICOG802944396]:DataResponse:Accepted [DEBUG] <[STUCK] ExecuteThread: '119' for queue: 'weblogic.kernel.Default (self-tuning)'> <SOAPPart> Setting current message form to: FORM_OPTIMIZED (currentMessage is now org.apache.axis.utils.ByteArray)
[2012-07-10 06:14:07,877] [ICOG802944401]:FiosVoiceResponse:Accepted [DEBUG] <[ACTIVE] ExecuteThread: '103' for queue: 'weblogic.kernel.Default (self-tuning)'> <PropertyManager> timestamp calculation, currentTimeStamp : 2012-07-10 nextRefreshTime : 2012-07-10
[2012-07-10 06:14:08,077] [ICOG802941112-01]:FirmSaleOrder: [DEBUG] <[STUCK] ExecuteThread: '4' for queue: 'weblogic.kernel.Default (self-tuning)'> <SSPBundleEventDAO> It's a Supp Cancle Order
[2012-07-10 06:14:08,077] [ICOG802941112-01]:FirmSaleOrder: [DEBUG] <[STUCK] ExecuteThread: '4' for queue: 'weblogic.kernel.Default (self-tuning)'> <SSPBundleEventDAO> Only Bundle Cancel Exists..
[2012-07-10 06:14:08,077] [ICOG802941112-01]:FirmSaleOrder: [DEBUG] <[STUCK] ExecuteThread: '4' for queue: 'weblogic.kernel.Default (self-tuning)'> <SSPBundleEventDAO> isFVBundleCancel true
[2012-07-10 06:14:08,077] [ICOG802941112-01]:FirmSaleOrder: [DEBUG] <[STUCK] ExecuteThread: '4' for queue: 'weblogic.kernel.Default (self-tuning)'> <BusinessDelegate> Got Product with productTypeValue as NA
[2012-07-10 06:14:08,077] [ICOG802941112-01]:FirmSaleOrder: [DEBUG] <[STUCK] ExecuteThread: '4' for queue: 'weblogic.kernel.Default (self-tuning)'> <BusinessDelegate> Got Product with productTypeValue as FDVBUNDLE
[2012-07-10 06:14:08,077] [ICOG802941112-01]:FirmSaleOrder: [DEBUG] <[STUCK] ExecuteThread: '4' for queue: 'weblogic.kernel.Default (self-tuning)'> <BusinessDelegate> Got FiOSVoice Product.. Going to insert int Master table..
[2012-07-10 06:14:08,077] [ICOG802941112-01]:FirmSaleOrder: [DEBUG] <[STUCK] ExecuteThread: '4' for queue: 'weblogic.kernel.Default (self-tuning)'> <BusinessDelegate> orderType Install
We are using - Weblogic - 11g, Solaris - 5.10, jdk160_31_64
Can some one please suggest
Regards,
UdayHi,
These are not an issue but you need couple of tuning on server side.
Make sure to increase your Max permsize to 1024m in case of 64 bit or 512m in case of 32 bit.
Try to increase chunk size and chunkpool size to 8k.
Enable tunneling on your server.
Make your min and max heap size as equal.
try to changes these settings and still you see the issue let me know.
Regards,
Kal -
Why is Skype Credit Going Down with Subscription S...
Why are my Skype credits going down? I have a subscription service for Unlimited calls to Australia? What charges am I acrueing with my calls to Australia and local landline/cell numbers? I started my subscription yesterday with $5.00 in credits. Now I'm at $4.00. What happens when it goes to zero? No more calls to Australia or no more calls to landlines/cells in the States? Thanks.
I am also having this very problem and it seems like someone is using my credit, almost daily or within two days..
-
OSPF with ipsec VTI interface goes down before dead timer.
I have a strange issue that OSPF will initially start working, hellos are exchanged both ways but then after about 3 – 6 hellos one of the sides stops getting them and the ipsec VTI tunnel drops on router A even before the dead timer reaches 0. Is this default behavior, when OSPF is over a VTI interface if it doesn’t receive hellos is drops the tunnel?
I’m at a loss as to what is going on since it looks like only one neighbor stops receiving hellos, router A, for a brief period of time. This VTI tunnel is going over another provider’s FW and they have assured me the tunnel destination/source ips are wide open they also sent me the ACL and I can verify this. The weird thing is if I enable EIGRP it works great with no issues. On router B I am using the same source/ip unnumbered interface on multiple VTI tunnels to to other destinations but this shouldn’t cause any issues I don’t think. I have never had an issue like this and from what I can tell the router A just stops briefly getting hellos after 3 – 6 initial hellos and drops the protocol on the VTI interface. If I set the dead timer on router A long enough it will stop receiving hellos but stay up and then after a while you get “LOADING to FULL” as the hellos start coming in again. Again the tunnel goes over a cisco 800 which I have no control over it and a potential FW before that but I saw the ACL and ip is being allowed. I was thinking this could be a trolling issue on the FW but it doesn’t explain why EIGRP works. FYI I was having a recursive routing issue before but I have since fixed that and the issue still continues.
******** it turns out that i was using the same source ip on multiple tunnels. IPsec would get confused with packets coming in and would deliver packets to the wrong tunnel interface. This was solved but using the key command with a different key number on each set of tunnels with the shared profile command
"If more than one mGRE tunnel is configured on a router that use the same tunnel source address, the shared keyword must be added to the tunnel protection command on all such tunnel interfaces. Each mGRE tunnel interface still requires a unique tunnel key, NHRP network-ID, and IP subnet address. This is common on a branch router when a dual DMVPN cloud topology is deployed. "
Router A:
router ospf 1
router-id 10.213.22.2
passive-interface default
network x.x.97.26 0.0.0.0 area 0
interface Tunnel1
ip unnumbered GigabitEthernet0/1
ip virtual-reassembly in
ip tcp adjust-mss 1398
ip ospf network point-to-point
load-interval 30
tunnel source GigabitEthernet0/1
tunnel mode ipsec ipv4
tunnel destination x.x.173.109
tunnel path-mtu-discovery
tunnel protection ipsec profile VTI-to-NB
router B:
router ospf 1
router-id 172.17.2.6
priority 1
redistribute static subnets route-map Lan-static-RM
passive-interface default
no passive-interface Tunnel1
no passive-interface Tunnel4
no passive-interface Tunnel5
network x.x.173.109 0.0.0.0 area 0
network 172.17.2.6 0.0.0.0 area 0
network 192.168.1.47 0.0.0.0 area 0
interface Tunnel4
ip unnumbered GigabitEthernet0/2
ip virtual-reassembly in
ip tcp adjust-mss 1398
ip ospf network point-to-point
load-interval 30
tunnel source GigabitEthernet0/2
tunnel mode ipsec ipv4
tunnel destination x.x.97.26
tunnel path-mtu-discovery
tunnel protection ipsec profile VTI_NB_to_dorrance_prv
end
thanks PDisclaimer
The Author of this posting offers the information contained within this posting without consideration and with the reader's understanding that there's no implied or expressed suitability or fitness for any purpose. Information provided is for informational purposes only and should not be construed as rendering professional advice of any kind. Usage of this posting's information is solely at reader's own risk.
Liability Disclaimer
In no event shall Author be liable for any damages whatsoever (including, without limitation, damages for loss of use, data or profit) arising out of the use or inability to use the posting's information even if Author has been advised of the possibility of such damage.
Posting
I haven't studied your config, but I can tell you I have production environment using OSPF across VTI (and GRE, and GRE/IPSec and DMVPN) tunnels without issue. I.e. so OSPF can be okay with VTI tunnels. -
HSRP both become active once tracked interface goes down
Hi team,
I was doing a fail-over testing for several sites for a customer.(dual CE router setup)
I have two routers 08R & 09R with following HSRP config.
with this configuration 08R is active & 09R is secondary.. all good
but when I shutdown the Serial link on active router(08R). both become active and standby unknown
they can ping each other, checked ARP table, all good.
also removed track statement on backup router (09R) but no joy...
put the debug on
Please advise.
08R#sh run int f0/0
ip address 10.58.0.29 255.255.255.0
standby 1 ip 10.58.0.30 <---hsrp ip
standby 1 priority 105<------------------- when s0/0/0 down, becomes 95
standby 1 preempt
standby 1 track Serial0/0/0.100
09R#sh run int f0/0
ip address 10.58.0.31 255.255.255.0
standby 1 ip 10.58.0.30
standby 1 priority 101 <-------
standby 1 preempt
standby 1 track Serial0/1/0:0.100<-----------also tracking its own serial interface (removed this as its not required but still not working)
Debug on 08R
Jun 25 08:51:33.554 GMT: HSRP: Fa0/0 Grp 1 Hello out 10.58.0.29 Active pri 95 vIP 10.58.0.30 <---sending hellos with lower priority 95, no in pkts
Jun 25 08:51:36.554 GMT: HSRP: Fa0/0 Grp 1 Hello out 10.58.0.29 Active pri 95 vIP 10.58.0.30
Jun 25 08:51:37.978 GMT: HSRP: Fa0/0 Grp 1 Hello out 10.58.0.29 Active pri 95 vIP 10.58.0.30
Debug on 09R
Jun 25 08:52:00.542 GMT: HSRP: Fa0/0 Grp 1 Hello out 10.58.0.31 Active pri 101 vIP 10.58.0.30
Jun 25 08:52:00.542 GMT: HSRP: Fa0/0 Grp 1 Hello in 10.58.0.29 Active pri 95 vIP 10.58.0.30
Jun 25 08:52:00.542 GMT: HSRP: Fa0/0 Grp 1 Coup out 10.58.0.31 Active pri 101 vIP 10.58.0.30
Jun 25 08:52:00.542 GMT: HSRP: Fa0/0 Grp 1 Hello out 10.58.0.31 Active pri 101 vIP 10.58.0.30
Jun 25 08:52:03.542 GMT: HSRP: Fa0/0 Grp 1 Hello out 10.58.0.31 Active pri 101 vIP 10.58.0.30
Jun 25 08:52:03.542 GMT: HSRP: Fa0/0 Grp 1 Hello in 10.58.0.29 Active pri 95 vIP 10.58.0.30
Jun 25 08:52:03.542 GMT: HSRP: Fa0/0 Grp 1 Coup out 10.58.0.31 Active pri 101 vIP 10.58.0.30
Jun 25 08:52:03.542 GMT: HSRP: Fa0/0 Grp 1 Hello out 10.58.0.31 Active pri 101 vIP 10.58.0.30Try this:
Router 08R Configuration
track 100 interface Serial0/0/0.100 ip routing
interface FastEthernet0/0
ip address 10.58.0.29 255.255.255.0
standby 1 ip 10.58.0.30
standby 1 preempt
standby 1 priority 105
standby 1 track 100 decrement 10
Router 09R Configuration
track 100 interface Serial0/1/0:0.100 ip routing
interface FastEthernet0/0
ip address 10.58.0.31 255.255.255.0
standby 1 ip 10.58.0.30
standby 1 preempt
standby 1 priority 101
standby 1 track 100 decrement 10
Ref.: CCO
/André -
Redundacy Not happening after interface goes down.
Dear All,
I have the set up which I have attached. To brief, I have 2 CSS 11501 in two different locations connected each other via fibre and running redundnacy protocol on the link as heartbeat.
The problem I am facing is if the interface through which the services are running fails the redundancy is not happening the master remains the master and the standby is standby and we have a services unavailable.
the configuration is given below
CSS_ACTIVE# sh run
!Generated on 03/07/2010 22:26:21
!Active version: sg0810106
configure
!*************************** GLOBAL ***************************
username admin des-password lcof1eugqece2afd superuser
bridge spanning-tree disabled
arp timeout 1400
no restrict web-mgmt
ip redundancy master
app
app session 10.90.1.2
ip route 10.50.3.0 255.255.255.0 10.50.9.1 1
!************************* INTERFACE *************************
interface e1
trunk
vlan 11
default-vlan
vlan 20
vlan 21
interface e9
description "REDUNDANCY - CSS-STANDBY PORT 9"
bridge vlan 23
!************************** CIRCUIT **************************
circuit VLAN11
description "MANAGEMENT IP ADDRESS"
ip address 10.7.10.20 255.255.255.0
circuit VLAN20
description "CSS_SERVER_VLAN"
redundancy
ip address 10.50.7.4 255.255.255.0
circuit VLAN21
description "CSS_CLIENT_VLAN"
redundancy
ip address 10.50.9.7 255.255.255.0
circuit VLAN23
description "REDUNDANT LINK TO CSS-STANDBY"
ip address 10.90.1.1 255.255.255.0
redundancy-protocol
!************************** SERVICE **************************
service Web1
ip address 10.50.7.5
active
service Web2
ip address 10.50.7.6
active
!*************************** OWNER ***************************
owner KIM
content web
add service Web1
add service Web2
vip address 10.50.9.2
advanced-balance sticky-srcip
active
CSS_ACTIVE#
CSS_STANDBY# sh run
!Generated on 03/07/2010 22:31:42
!Active version: sg0810106
configure
!*************************** GLOBAL ***************************
ip redundancy
bridge spanning-tree disabled
arp timeout 1400
no restrict web-mgmt
app
app session 10.90.1.1
ip route 10.50.3.0 255.255.255.0 10.50.9.1 1
!************************* INTERFACE *************************
interface e1
description "TRUNK "
trunk
vlan 11
default-vlan
vlan 20
vlan 21
interface e9
description "REDUNDANCY - CSS-STANDY PORT 9"
bridge vlan 23
interface Ethernet-Mgmt
phy 10Mbits-FD
admin-shutdown
!************************** CIRCUIT **************************
circuit VLAN11
description "MANAGEMENT IP ADDRESS"
ip address 10.7.10.21 255.255.255.0
circuit VLAN20
description "CSS_SERVER_VLAN"
redundancy
ip address 10.50.7.4 255.255.255.0
circuit VLAN21
description "CSS_CLIENT_VLAN"
redundancy
ip address 10.50.9.7 255.255.255.0
circuit VLAN23
description "REDUNDANT LINK TO CSS-STANDBY"
ip address 10.90.1.2 255.255.255.0
redundancy-protocol
!************************** SERVICE **************************
service Web1
ip address 10.50.7.5
active
service Web2
ip address 10.50.7.6
active
!*************************** OWNER ***************************
owner KIM
content web
add service Web1
add service Web2
vip address 10.50.9.2
advanced-balance sticky-srcip
active
CSS_STANDBY#
If the interface e1 fails on active the redundancy is not shifting to standby.You have setup box-to-box redundancy.
This mechanism is very basic and only detects a box failure. So, as long as the master can send heartbeat through the 'redundancy protocol' interface it will stay master.
You should use interface/vip redundancy.
A little bit more complex to configure but much more robust and with more features including interface failure detection.
http://www.cisco.com/en/US/docs/app_ntwk_services/data_center_app_services/css11500series/v8.20_v8.10/configuration/redundancy/guide/VIPRedun.html
Gilles. -
Network ce0 interface goes down when reboots or does not come up
Hi,
Have a V440 and on reboot the main ip ce0 is not up. I have to manually go in and ifconfig 192.168.1.3 up
My hostname.ce0
192.168.1.3
# wc /etc/hostname.ce0
2 1 13 /etc/hostname.ce0
# ifconfig -a
lo0: flags=2001000849<UP,LOOPBACK,RUNNING,MULTICAST,IPv4,VIRTUAL> mtu 8232 index 1
inet 127.0.0.1 netmask ff000000
ce0: flags=201000843<UP,BROADCAST,RUNNING,MULTICAST,IPv4,CoS> mtu 1500 index 2
inet 192.168.1.3 netmask ffffff00 broadcast 192.168.1.255
ether 0:3:ba:d5:ba:2b
ce0:1: flags=201000843<UP,BROADCAST,RUNNING,MULTICAST,IPv4,CoS> mtu 1500 index 2
inet 192.168.1.76 netmask ffffff00 broadcast 192.168.1.255
ce0:4: flags=201000843<UP,BROADCAST,RUNNING,MULTICAST,IPv4,CoS> mtu 1500 index 2
inet 192.168.1.72 netmask ffffff00 broadcast 192.168.1.255
ce0:5: flags=201000843<UP,BROADCAST,RUNNING,MULTICAST,IPv4,CoS> mtu 1500 index 2
inet 192.168.1.66 netmask ffffff00 broadcast 192.168.1.255
ce0:6: flags=201000843<UP,BROADCAST,RUNNING,MULTICAST,IPv4,CoS> mtu 1500 index 2
inet 192.168.1.47 netmask ffffff00 broadcast 192.168.1.255
ce0:7: flags=201000843<UP,BROADCAST,RUNNING,MULTICAST,IPv4,CoS> mtu 1500 index 2
inet 192.168.1.42 netmask ffffff00 broadcast 192.168.1.255
ce0:8: flags=201000843<UP,BROADCAST,RUNNING,MULTICAST,IPv4,CoS> mtu 1500 index 2
inet 192.168.1.69 netmask ffffff00 broadcast 192.168.1.255
ce0:9: flags=201000843<UP,BROADCAST,RUNNING,MULTICAST,IPv4,CoS> mtu 1500 index 2
inet 192.168.1.88 netmask ffffff00 broadcast 192.168.1.255
ce0:10: flags=201000843<UP,BROADCAST,RUNNING,MULTICAST,IPv4,CoS> mtu 1500 index 2
inet 192.168.1.45 netmask ffffff00 broadcast 192.168.1.255
ce0:11: flags=201000843<UP,BROADCAST,RUNNING,MULTICAST,IPv4,CoS> mtu 1500 index 2
inet 192.168.1.90 netmask ffffff00 broadcast 192.168.1.255
ce0:12: flags=201000843<UP,BROADCAST,RUNNING,MULTICAST,IPv4,CoS> mtu 1500 index 2
inet 192.168.1.98 netmask ffffff00 broadcast 192.168.1.255
ce0:13: flags=201000843<UP,BROADCAST,RUNNING,MULTICAST,IPv4,CoS> mtu 1500 index 2
inet 192.168.1.73 netmask ffffff00 broadcast 192.168.1.255
ce0:14: flags=201000843<UP,BROADCAST,RUNNING,MULTICAST,IPv4,CoS> mtu 1500 index 2
inet 192.168.1.87 netmask ffffff00 broadcast 192.168.1.255
ce0:15: flags=201000843<UP,BROADCAST,RUNNING,MULTICAST,IPv4,CoS> mtu 1500 index 2
inet 192.168.1.48 netmask ffffff00 broadcast 192.168.1.255
ce0:16: flags=201000843<UP,BROADCAST,RUNNING,MULTICAST,IPv4,CoS> mtu 1500 index 2
inet 192.168.1.103 netmask ffffff00 broadcast 192.168.1.255
ce0:17: flags=201000843<UP,BROADCAST,RUNNING,MULTICAST,IPv4,CoS> mtu 1500 index 2
inet 192.168.1.44 netmask ffffff00 broadcast 192.168.1.255
ce0:18: flags=201000843<UP,BROADCAST,RUNNING,MULTICAST,IPv4,CoS> mtu 1500 index 2
inet 192.168.1.78 netmask ffffff00 broadcast 192.168.1.255
ce0:19: flags=201000843<UP,BROADCAST,RUNNING,MULTICAST,IPv4,CoS> mtu 1500 index 2
inet 192.168.1.46 netmask ffffff00 broadcast 192.168.1.255
ce0:21: flags=201000843<UP,BROADCAST,RUNNING,MULTICAST,IPv4,CoS> mtu 1500 index 2
inet 192.168.1.56 netmask ffffff00 broadcast 192.168.1.255
ce0:22: flags=201000843<UP,BROADCAST,RUNNING,MULTICAST,IPv4,CoS> mtu 1500 index 2
inet 192.168.1.77 netmask ffffff00 broadcast 192.168.1.255
ce0:23: flags=201000843<UP,BROADCAST,RUNNING,MULTICAST,IPv4,CoS> mtu 1500 index 2
inet 192.168.1.80 netmask ffffff00 broadcast 192.168.1.255
ce0:24: flags=201000843<UP,BROADCAST,RUNNING,MULTICAST,IPv4,CoS> mtu 1500 index 2
inet 192.168.1.83 netmask ffffff00 broadcast 192.168.1.255
ce0:25: flags=201000843<UP,BROADCAST,RUNNING,MULTICAST,IPv4,CoS> mtu 1500 index 2
inet 192.168.1.84 netmask ffffff00 broadcast 192.168.1.255
ce0:26: flags=201000843<UP,BROADCAST,RUNNING,MULTICAST,IPv4,CoS> mtu 1500 index 2
inet 192.168.1.67 netmask ffffff00 broadcast 192.168.1.255
ce0:28: flags=201000843<UP,BROADCAST,RUNNING,MULTICAST,IPv4,CoS> mtu 1500 index 2
inet 192.168.1.41 netmask ffffff00 broadcast 192.168.1.255
ce0:29: flags=201000843<UP,BROADCAST,RUNNING,MULTICAST,IPv4,CoS> mtu 1500 index 2
inet 192.168.1.64 netmask ffffff00 broadcast 192.168.1.255
ce0:30: flags=201000843<UP,BROADCAST,RUNNING,MULTICAST,IPv4,CoS> mtu 1500 index 2
inet 192.168.1.57 netmask ffffff00 broadcast 192.168.1.255
ce0:31: flags=201000843<UP,BROADCAST,RUNNING,MULTICAST,IPv4,CoS> mtu 1500 index 2
inet 192.168.1.71 netmask ffffff00 broadcast 192.168.1.255
ce0:32: flags=201000843<UP,BROADCAST,RUNNING,MULTICAST,IPv4,CoS> mtu 1500 index 2
inet 192.168.1.86 netmask ffffff00 broadcast 192.168.1.255
ce0:33: flags=201000843<UP,BROADCAST,RUNNING,MULTICAST,IPv4,CoS> mtu 1500 index 2
inet 192.168.1.59 netmask ffffff00 broadcast 192.168.1.255
ce0:34: flags=201000843<UP,BROADCAST,RUNNING,MULTICAST,IPv4,CoS> mtu 1500 index 2
inet 192.168.1.65 netmask ffffff00 broadcast 192.168.1.255
ce0:35: flags=201000843<UP,BROADCAST,RUNNING,MULTICAST,IPv4,CoS> mtu 1500 index 2
inet 192.168.1.104 netmask ffffff00 broadcast 192.168.1.255
ce0:36: flags=201000843<UP,BROADCAST,RUNNING,MULTICAST,IPv4,CoS> mtu 1500 index 2
inet 192.168.1.97 netmask ffffff00 broadcast 192.168.1.255
ce0:37: flags=201000843<UP,BROADCAST,RUNNING,MULTICAST,IPv4,CoS> mtu 1500 index 2
inet 192.168.1.70 netmask ffffff00 broadcast 192.168.1.255
ce0:38: flags=201000843<UP,BROADCAST,RUNNING,MULTICAST,IPv4,CoS> mtu 1500 index 2
inet 192.168.1.74 netmask ffffff00 broadcast 192.168.1.255
ce0:39: flags=201000843<UP,BROADCAST,RUNNING,MULTICAST,IPv4,CoS> mtu 1500 index 2
inet 192.168.1.79 netmask ffffff00 broadcast 192.168.1.255
ce0:41: flags=201000843<UP,BROADCAST,RUNNING,MULTICAST,IPv4,CoS> mtu 1500 index 2
inet 192.168.1.68 netmask ffffff00 broadcast 192.168.1.255
ce0:42: flags=201000843<UP,BROADCAST,RUNNING,MULTICAST,IPv4,CoS> mtu 1500 index 2
inet 192.168.1.43 netmask ffffff00 broadcast 192.168.1.255
ce0:43: flags=201000843<UP,BROADCAST,RUNNING,MULTICAST,IPv4,CoS> mtu 1500 index 2
inet 192.168.1.85 netmask ffffff00 broadcast 192.168.1.255
ce0:44: flags=201000843<UP,BROADCAST,RUNNING,MULTICAST,IPv4,CoS> mtu 1500 index 2
inet 192.168.1.105 netmask ffffff00 broadcast 192.168.1.255
ce0:45: flags=201000843<UP,BROADCAST,RUNNING,MULTICAST,IPv4,CoS> mtu 1500 index 2
inet 192.168.1.60 netmask ffffff00 broadcast 192.168.1.255
ce0:46: flags=201000843<UP,BROADCAST,RUNNING,MULTICAST,IPv4,CoS> mtu 1500 index 2
inet 192.168.1.82 netmask ffffff00 broadcast 192.168.1.255
ce0:47: flags=201000843<UP,BROADCAST,RUNNING,MULTICAST,IPv4,CoS> mtu 1500 index 2
inet 192.168.1.96 netmask ffffff00 broadcast 192.168.1.255
ce0:48: flags=201000843<UP,BROADCAST,RUNNING,MULTICAST,IPv4,CoS> mtu 1500 index 2
inet 192.168.1.94 netmask ffffff00 broadcast 192.168.1.255
ce0:49: flags=201000843<UP,BROADCAST,RUNNING,MULTICAST,IPv4,CoS> mtu 1500 index 2
inet 192.168.1.81 netmask ffffff00 broadcast 192.168.1.255
ce0:50: flags=201000843<UP,BROADCAST,RUNNING,MULTICAST,IPv4,CoS> mtu 1500 index 2
inet 192.168.1.106 netmask ffffff00 broadcast 192.168.1.255
ce0:51: flags=201000843<UP,BROADCAST,RUNNING,MULTICAST,IPv4,CoS> mtu 1500 index 2
inet 192.168.1.53 netmask ffffff00 broadcast 192.168.1.255
ce0:52: flags=201000843<UP,BROADCAST,RUNNING,MULTICAST,IPv4,CoS> mtu 1500 index 2
inet 192.168.1.91 netmask ffffff00 broadcast 192.168.1.255
ce0:53: flags=201000843<UP,BROADCAST,RUNNING,MULTICAST,IPv4,CoS> mtu 1500 index 2
inet 192.168.1.49 netmask ffffff00 broadcast 192.168.1.255
ce0:54: flags=201000843<UP,BROADCAST,RUNNING,MULTICAST,IPv4,CoS> mtu 1500 index 2
inet 192.168.1.63 netmask ffffff00 broadcast 192.168.1.255
ce0:55: flags=201000843<UP,BROADCAST,RUNNING,MULTICAST,IPv4,CoS> mtu 1500 index 2
inet 192.168.1.102 netmask ffffff00 broadcast 192.168.1.255
ce0:56: flags=201000843<UP,BROADCAST,RUNNING,MULTICAST,IPv4,CoS> mtu 1500 index 2
inet 192.168.1.62 netmask ffffff00 broadcast 192.168.1.255
ce0:57: flags=201000843<UP,BROADCAST,RUNNING,MULTICAST,IPv4,CoS> mtu 1500 index 2
inet 192.168.1.107 netmask ffffff00 broadcast 192.168.1.255
ce0:58: flags=201000843<UP,BROADCAST,RUNNING,MULTICAST,IPv4,CoS> mtu 1500 index 2
inet 192.168.1.130 netmask ffffff00 broadcast 192.168.1.255
ce0:59: flags=201000843<UP,BROADCAST,RUNNING,MULTICAST,IPv4,CoS> mtu 1500 index 2
inet 192.168.1.131 netmask ffffff00 broadcast 192.168.1.255
ce0:60: flags=201000843<UP,BROADCAST,RUNNING,MULTICAST,IPv4,CoS> mtu 1500 index 2
inet 192.168.1.132 netmask ffffff00 broadcast 192.168.1.255
ce0:61: flags=201000843<UP,BROADCAST,RUNNING,MULTICAST,IPv4,CoS> mtu 1500 index 2
inet 192.168.1.134 netmask ffffff00 broadcast 192.168.1.255
ce0:62: flags=201000843<UP,BROADCAST,RUNNING,MULTICAST,IPv4,CoS> mtu 1500 index 2
inet 192.168.1.135 netmask ffffff00 broadcast 192.168.1.255
ce0:63: flags=201000843<UP,BROADCAST,RUNNING,MULTICAST,IPv4,CoS> mtu 1500 index 2
inet 192.168.1.136 netmask ffffff00 broadcast 192.168.1.255
ce0:64: flags=201000843<UP,BROADCAST,RUNNING,MULTICAST,IPv4,CoS> mtu 1500 index 2
inet 192.168.1.138 netmask ffffff00 broadcast 192.168.1.255
ce0:65: flags=201000843<UP,BROADCAST,RUNNING,MULTICAST,IPv4,CoS> mtu 1500 index 2
inet 192.168.1.139 netmask ffffff00 broadcast 192.168.1.255
ce0:66: flags=201000843<UP,BROADCAST,RUNNING,MULTICAST,IPv4,CoS> mtu 1500 index 2
inet 192.168.1.140 netmask ffffff00 broadcast 192.168.1.255
ce0:67: flags=201000843<UP,BROADCAST,RUNNING,MULTICAST,IPv4,CoS> mtu 1500 index 2
inet 192.168.1.141 netmask ffffff00 broadcast 192.168.1.255
ce0:68: flags=201000843<UP,BROADCAST,RUNNING,MULTICAST,IPv4,CoS> mtu 1500 index 2
inet 192.168.1.142 netmask ffffff00 broadcast 192.168.1.255
ce0:69: flags=201000843<UP,BROADCAST,RUNNING,MULTICAST,IPv4,CoS> mtu 1500 index 2
inet 192.168.1.143 netmask ffffff00 broadcast 192.168.1.255
ce0:70: flags=201000843<UP,BROADCAST,RUNNING,MULTICAST,IPv4,CoS> mtu 1500 index 2
inet 192.168.1.145 netmask ffffff00 broadcast 192.168.1.255
ce0:71: flags=201000843<UP,BROADCAST,RUNNING,MULTICAST,IPv4,CoS> mtu 1500 index 2
inet 192.168.1.146 netmask ffffff00 broadcast 192.168.1.255
ce0:72: flags=201000843<UP,BROADCAST,RUNNING,MULTICAST,IPv4,CoS> mtu 1500 index 2
inet 192.168.1.147 netmask ffffff00 broadcast 192.168.1.255
ce0:73: flags=201000843<UP,BROADCAST,RUNNING,MULTICAST,IPv4,CoS> mtu 1500 index 2
inet 192.168.1.151 netmask ffffff00 broadcast 192.168.1.255
ce0:74: flags=201000843<UP,BROADCAST,RUNNING,MULTICAST,IPv4,CoS> mtu 1500 index 2
inet 192.168.1.152 netmask ffffff00 broadcast 192.168.1.255
ce0:75: flags=201000843<UP,BROADCAST,RUNNING,MULTICAST,IPv4,CoS> mtu 1500 index 2
inet 192.168.1.153 netmask ffffff00 broadcast 192.168.1.255
ce0:76: flags=201000843<UP,BROADCAST,RUNNING,MULTICAST,IPv4,CoS> mtu 1500 index 2
inet 192.168.1.154 netmask ffffff00 broadcast 192.168.1.255
ce0:77: flags=201000843<UP,BROADCAST,RUNNING,MULTICAST,IPv4,CoS> mtu 1500 index 2
inet 192.168.1.155 netmask ffffff00 broadcast 192.168.1.255
ce0:78: flags=201000843<UP,BROADCAST,RUNNING,MULTICAST,IPv4,CoS> mtu 1500 index 2
inet 192.168.1.156 netmask ffffff00 broadcast 192.168.1.255
ce0:79: flags=201000843<UP,BROADCAST,RUNNING,MULTICAST,IPv4,CoS> mtu 1500 index 2
inet 192.168.1.157 netmask ffffff00 broadcast 192.168.1.255
ce0:80: flags=201000843<UP,BROADCAST,RUNNING,MULTICAST,IPv4,CoS> mtu 1500 index 2
inet 192.168.1.158 netmask ffffff00 broadcast 192.168.1.255
ce0:81: flags=201000843<UP,BROADCAST,RUNNING,MULTICAST,IPv4,CoS> mtu 1500 index 2
inet 192.168.1.189 netmask ffffff00 broadcast 192.168.1.255
ce0:82: flags=201000843<UP,BROADCAST,RUNNING,MULTICAST,IPv4,CoS> mtu 1500 index 2
inet 192.168.1.211 netmask ffffff00 broadcast 192.168.1.255
ce0:83: flags=201000843<UP,BROADCAST,RUNNING,MULTICAST,IPv4,CoS> mtu 1500 index 2
inet 192.168.1.212 netmask ffffff00 broadcast 192.168.1.255
ce0:84: flags=201000843<UP,BROADCAST,RUNNING,MULTICAST,IPv4,CoS> mtu 1500 index 2
inet 192.168.1.213 netmask ffffff00 broadcast 192.168.1.255
ce0:85: flags=201000843<UP,BROADCAST,RUNNING,MULTICAST,IPv4,CoS> mtu 1500 index 2
inet 192.168.1.214 netmask ffffff00 broadcast 192.168.1.255
ce0:86: flags=201000843<UP,BROADCAST,RUNNING,MULTICAST,IPv4,CoS> mtu 1500 index 2
inet 192.168.1.215 netmask ffffff00 broadcast 192.168.1.255
ce0:87: flags=201000843<UP,BROADCAST,RUNNING,MULTICAST,IPv4,CoS> mtu 1500 index 2
inet 192.168.1.216 netmask ffffff00 broadcast 192.168.1.255
ce0:88: flags=201000843<UP,BROADCAST,RUNNING,MULTICAST,IPv4,CoS> mtu 1500 index 2
inet 192.168.1.217 netmask ffffff00 broadcast 192.168.1.255
ce0:89: flags=201000843<UP,BROADCAST,RUNNING,MULTICAST,IPv4,CoS> mtu 1500 index 2
inet 192.168.1.218 netmask ffffff00 broadcast 192.168.1.255
ce0:90: flags=201000843<UP,BROADCAST,RUNNING,MULTICAST,IPv4,CoS> mtu 1500 index 2
inet 192.168.1.219 netmask ffffff00 broadcast 192.168.1.255
lo0: flags=2002000849<UP,LOOPBACK,RUNNING,MULTICAST,IPv6,VIRTUAL> mtu 8252 index 1
inet6 ::1/128
Any help would be great!
Thanks
Marcmsglobal3 wrote:
Hi,
Have a V440 and on reboot the main ip ce0 is not up. I have to manually go in and ifconfig 192.168.1.3 up
My hostname.ce0
192.168.1.3
# wc /etc/hostname.ce0
2 1 13 /etc/hostname.ce0The 'wc' output shows that you have a blank line in the file.
Remove that line (so that 'wc' reports only 1 line present) and the interface will be brought up at boot time.
Darren -
Golden Gate: Extract going down with below warnings
2011-01-19 15:57:11 INFO OGG-00975 Oracle GoldenGate Manager for Oracle, mgr.prm: EXTRACT EXT1 starting.
2011-01-19 15:57:11 INFO OGG-00992 Oracle GoldenGate Capture for Oracle, ext1.prm: EXTRACT EXT1 starting.
2011-01-19 15:57:11 WARNING OGG-01573 Oracle GoldenGate Capture for Oracle, ext1.prm: br_validate_bcp: failed in call to: ggcrc64valid.
2011-01-19 15:57:11 WARNING OGG-01573 Oracle GoldenGate Capture for Oracle, ext1.prm: br_validate_bcp: failed in call to: br_validate_bcp.please find below the result of it:-
GGSCI (orkxd1dmodidb01.espdev.aurdev.national.com.au) 1> view report ext1
Oracle GoldenGate Capture for Oracle
Version 11.1.1.0.0 Build 078
Linux, x64, 64bit (optimized), Oracle 11 on Jul 28 2010 14:58:37
Copyright (C) 1995, 2010, Oracle and/or its affiliates. All rights reserved.
Starting at 2011-03-15 14:53:13
Operating System Version:
Linux
Version #1 SMP Tue Feb 10 15:14:47 EST 2009, Release 2.6.18-128.1.1.0.1.el5
Node: orkxd1dmodidb01.espdev.aurdev.national.com.au
Machine: x86_64
soft limit hard limit
Address Space Size : unlimited unlimited
Heap Size : unlimited unlimited
File Size : unlimited unlimited
CPU Time : unlimited unlimited
Process id: 16444
Description:
** Running with the following parameters **
EXTRACT ext1
SETENV (ORACLE_HOME = "/oracle/app/ora11gdb/database")
Set environment variable (ORACLE_HOME=/oracle/app/ora11gdb/database)
SETENV (ORACLE_SID = "DEVODI1")
Set environment variable (ORACLE_SID=DEVODI1)
SETENV (NLS_LANG = "AMERICAN_AMERICA.AL32UTF8")
Set environment variable (NLS_LANG=AMERICAN_AMERICA.AL32UTF8)
USERID ggs_owner, PASSWORD *********
EXTTRAIL /goldengate/dirdat/lt
GETENV (ORACLE_HOME)
ORACLE_HOME = /oracle/app/ora11gdb/database
GETENV (ORACLE_SID)
ORACLE_SID = DEVODI1
GETENV (NLS_LANG)
NLS_LANG = AMERICAN_AMERICA.AL32UTF8
TRANLOGOPTIONS ASMUSER sys@+ASM, ASMPASSWORD ******
DISCARDFILE /goldengate/dirdat/capt.dsc, PURGE
RMTHOST orkxd1dmodidb01, MGRPORT 7841
TABLE SRC_FC.ch_acct_cust_xref;
TABLE SRC_FC.ci_custmast;
TABLE SRC_FC.ci_custrel;
TABLE SRC_FC.cop_applicant_details;
TABLE SRC_FC.cop_cust_changed_information;
TABLE SRC_FC.cop_applicant_state;
TABLE SRC_FC.CS_HO_CUSTACCTXREF;
Bounded Recovery Parameter:
BRINTERVAL = 4HOURS
BRDIR = /goldengate
2011-03-15 14:53:13 WARNING OGG-01573 br_validate_bcp: failed in call to: ggcrc64valid.
2011-03-15 14:53:13 WARNING OGG-01573 br_validate_bcp: failed in call to: br_validate_bcp. -
My battery charge is not lasting. No apps are being used or opened. The phone is losing power without using it. It is sitting on my desk not being used and is now reading 58%. Fully charged at 100% this morning (8:00). Help!!!!!!
1. Plug phone into AC adaptor and charge for at least 30 minutes
2. If not on, reset phone: press both home and power buttons for at least 10 seconds, releasing when the Apple logo appears.
If no reponse to above, there is hardware damage and you need to take it to Apple or whoever provides iPhone service in your country. -
VOD - application goes down after a while (only some instances)
Hello Guys,
I have a simple VOD application running on FMS 3.5.5 which I need to stream continuously but I'm unable to identify the correct configuration to do so. I removed as much limit details as I could from those XML file: Server.xml, Application.xml and VHost.xml.
Basically I have arround 15 different streams but all of sudden some of them, NOT ALL, goes down with no explanation (as I could see).
As per logs, there is no much details but "application unloaded".
Can someone pls help me to identify what else needs to be changed in order to have those stream playing continuously? Usually they went down after some hours in idle state. But I'm not sure whether it's related to CPU/Memory usage. My server has 8GB of memory, and when I start playing all those stream the memory goes down till 52mb free (50mb to 53mb usually). "All" memory is allocated to cache, and it seems there is no problem with that.
Server.xml
<Root>
<Server>
<NetworkingIPv6 enable="false" />
<CrossDomainPath></CrossDomainPath>
<Plugins>
<UserDefined>
<UserKey1>
This data can be retrieved by FMS plug-in.
Please look at Auth Adaptor sample for details.
</UserKey1>
<UserKey2>
This data can be retrieved by FMS plug-in.
Please look at Auth Adaptor sample for details.
</UserKey2>
</UserDefined>
<FilePlugin enabled="true">
<MaxNumberOfRequests>0</MaxNumberOfRequests>
<Content type="Streams">true</Content>
<Content type="SWF">false</Content>
</FilePlugin>
</Plugins>
<SSL>
<SSLRandomSeed>16</SSLRandomSeed>
<SSLSessionCacheGC>5</SSLSessionCacheGC>
<SSLClientCtx>
<SSLVerifyCertificate>true</SSLVerifyCertificate>
<SSLCACertificatePath></SSLCACertificatePath>
<SSLCACertificateFile></SSLCACertificateFile>
<SSLVerifyDepth>9</SSLVerifyDepth>
<SSLCipherSuite>ALL:!ADH:!LOW:!EXP:!MD5:@STRENGTH</SSLCipherSuite>
</SSLClientCtx>
</SSL>
<Process>
<UID>${SERVER.PROCESS_UID}</UID>
<GID>${SERVER.PROCESS_GID}</GID>
</Process>
<Mask>017</Mask>
<LicenseInfo>${SERVER.LICENSEINFO}</LicenseInfo>
<LicenseInfoEx></LicenseInfoEx>
<ReadBufferSize>4096</ReadBufferSize>
<AdminServer>
<CrossDomainPath></CrossDomainPath>
<RTMP>
<RTMPE enabled="true"></RTMPE>
</RTMP>
<HostPort>${SERVER.ADMINSERVER_HOSTPORT}</HostPort>
<IpcHostPort>localhost:11110</IpcHostPort>
<SocketGC>60</SocketGC>
<Process>
<UID>${SERVER.PROCESS_UID}</UID>
<GID>${SERVER.PROCESS_GID}</GID>
</Process>
<AdminElem>false</AdminElem>
<Allow>all</Allow>
<Deny></Deny>
<Order>Allow,Deny</Order>
</AdminServer>
<AutoCloseIdleClients enable="false">
<CheckInterval>-1</CheckInterval>
<MaxIdleTime>-1</MaxIdleTime>
</AutoCloseIdleClients>
<ResourceLimits>
<FLVCachePurge>60</FLVCachePurge>
<FLVCache>
<FileCheckInterval>120</FileCheckInterval>
<MaxSize>${SERVER.FLVCACHE_MAXSIZE}</MaxSize>
<MaxKeyframeCacheSize>0</MaxKeyframeCacheSize>
</FLVCache>
<RecBuffer>
<MaxFlushTime>5</MaxFlushTime>
<MaxFlushSize>256</MaxFlushSize>
<AllowedVideoLag></AllowedVideoLag>
<MaxSize>512000</MaxSize>
<MaxTimestampSkew>-1</MaxTimestampSkew>
</RecBuffer>
<CPUMonitor>1</CPUMonitor>
<ThreadPoolGC>20</ThreadPoolGC>
<MsgPoolGC>60</MsgPoolGC>
<ApplicationGC>-1</ApplicationGC>
<FLVCacheSize>10</FLVCacheSize>
<SocketGC>60</SocketGC>
<ProcVMSizeMonitorInterval>60</ProcVMSizeMonitorInterval>
<ProcVMSizeWarn>1800</ProcVMSizeWarn>
<ProcVMSizeNominal>1600</ProcVMSizeNominal>
<SSLSessionCacheGC>5</SSLSessionCacheGC>
<Connector>
<HTTP>
<MinConnectionThreads>0</MinConnectionThreads>
<MaxConnectionThreads>0</MaxConnectionThreads>
<MaxConnectionQueueSize>-1</MaxConnectionQueueSize>
<HandleCache>
<MaxSize>100</MaxSize>
<IdleTime>30</IdleTime>
<TrimSize>0.2</TrimSize>
<GCInterval>60</GCInterval>
</HandleCache>
</HTTP>
<RTMP>
<MinIOThreads>0</MinIOThreads>
<MaxIOThreads>32</MaxIOThreads>
<NumCRThreads>0</NumCRThreads>
<MinConnectionThreads>0</MinConnectionThreads>
<MaxConnectionThreads>0</MaxConnectionThreads>
<MaxConnectionQueueSize>-1</MaxConnectionQueueSize>
</RTMP>
</Connector>
<Protocol>
<RTMP>
<Edge>
<MinIOThreads>0</MinIOThreads>
<MaxIOThreads>0</MaxIOThreads>
<SocketTableSize>-1</SocketTableSize>
<SocketOverflowBuckets>-1</SocketOverflowBuckets>
<MaxConnectionRate>-1</MaxConnectionRate>
</Edge>
<Core>
<MinIOThreads>0</MinIOThreads>
<MaxIOThreads>0</MaxIOThreads>
<SocketTableSize>-1</SocketTableSize>
<SocketOverflowBuckets>-1</SocketOverflowBuckets>
</Core>
<Admin>
<MinIOThreads>0</MinIOThreads>
<MaxIOThreads>0</MaxIOThreads>
<SocketTableSize>-1</SocketTableSize>
<SocketOverflowBuckets>-1</SocketOverflowBuckets>
</Admin>
<SocketSndBuf>0</SocketSndBuf>
<SocketRcvBuf>0</SocketRcvBuf>
<DiffServ>0</DiffServ>
<DiffServMask>0</DiffServMask>
</RTMP>
<ECCP>
<MinIOThreads>0</MinIOThreads>
<MaxIOThreads>0</MaxIOThreads>
<SocketTableSize>-1</SocketTableSize>
<SocketOverflowBuckets>-1</SocketOverflowBuckets>
<CoreTimeout>30</CoreTimeout>
</ECCP>
<ACCP>
<MinIOThreads>0</MinIOThreads>
<MaxIOThreads>0</MaxIOThreads>
<SocketTableSize>-1</SocketTableSize>
<SocketOverflowBuckets>-1</SocketOverflowBuckets>
</ACCP>
</Protocol>
<IPCQueues>
<GlobalQueue>
<HeapSize>2048</HeapSize>
<MaxQueueSize>10</MaxQueueSize>
</GlobalQueue>
<EdgeCore>
<HeapSize>1024</HeapSize>
<MaxQueueSize>10</MaxQueueSize>
</EdgeCore>
<Services>
<HeapSize>2048</HeapSize>
<MaxQueueSize>10</MaxQueueSize>
</Services>
</IPCQueues>
<MessageCache enable="false">
<MaxCacheUnits>4096</MaxCacheUnits>
<MaxCacheSize>100</MaxCacheSize>
<MaxUnitSize>16</MaxUnitSize>
<FreeRatio>0.125</FreeRatio>
<GlobalRatio>0.4</GlobalRatio>
<MaxAge>1000000</MaxAge>
<UpdateInterval>1024</UpdateInterval>
<FreeMemRatio>0.5</FreeMemRatio>
</MessageCache>
<SmallMemPool enable="false">
<MaxCacheUnits>4096</MaxCacheUnits>
<MaxCacheSize>100</MaxCacheSize>
<MaxUnitSize>16</MaxUnitSize>
<FreeRatio>0.125</FreeRatio>
<GlobalRatio>0.4</GlobalRatio>
<MaxAge>1000000</MaxAge>
<UpdateInterval>1024</UpdateInterval>
<FreeMemRatio>0.5</FreeMemRatio>
</SmallMemPool>
<LargeMemPool enable="false">
<MaxCacheUnits>4096</MaxCacheUnits>
<MaxCacheSize>100</MaxCacheSize>
<MaxUnitSize>16</MaxUnitSize>
<FreeRatio>0.125</FreeRatio>
<GlobalRatio>0.4</GlobalRatio>
<MaxAge>1000000</MaxAge>
<UpdateInterval>1024</UpdateInterval>
<FreeMemRatio>0.5</FreeMemRatio>
</LargeMemPool>
<SegmentsPool enable="false">
<MaxCacheUnits>4096</MaxCacheUnits>
<MaxCacheSize>100</MaxCacheSize>
<MaxUnitSize>16</MaxUnitSize>
<FreeRatio>0.125</FreeRatio>
<GlobalRatio>0.4</GlobalRatio>
<MaxAge>1000000</MaxAge>
<UpdateInterval>1024</UpdateInterval>
<FreeMemRatio>0.5</FreeMemRatio>
</SegmentsPool>
<Master>
<CoreGC>-1</CoreGC>
<CoreExitDelay>20</CoreExitDelay>
</Master>
<Edge>
<MinEventQueueThreads>2</MinEventQueueThreads>
<MaxEventQueueThreads>-2</MaxEventQueueThreads>
<NumSchedQueues>1</NumSchedQueues>
</Edge>
</ResourceLimits>
<Logging>
<Time>local</Time>
<RetryNumber>0</RetryNumber>
<RetrySleep>100</RetrySleep>
<RecordsNumber>-1</RecordsNumber>
<TerminatingCharacters>CRLF</TerminatingCharacters>
<Access>
<Enable>true</Enable>
<Scope>server</Scope>
<Checkpoints enable="false">
<CheckInterval>60</CheckInterval>
<LogInterval>3600</LogInterval>
</Checkpoints>
</Access>
<Diagnostic>
<Enable>true</Enable>
</Diagnostic>
<Application>
<Enable>true</Enable>
</Application>
<AuthEvent>
<Enable>true</Enable>
</AuthEvent>
<AuthMessage>
<Enable>true</Enable>
</AuthMessage>
<FileIO>
<Enable>true</Enable>
</FileIO>
</Logging>
<Localhost>localhost</Localhost>
<PublicIP></PublicIP>
<SWFVerification>
<SWFFolder></SWFFolder>
<DirLevelSWFScan>1</DirLevelSWFScan>
<MaxInitDelay>5</MaxInitDelay>
<MinGoodVersion></MinGoodVersion>
<Cache>
<TTL>1440</TTL>
<UpdateInterval>5</UpdateInterval>
</Cache>
</SWFVerification>
<Streams>
<StreamLogLevel>warning</StreamLogLevel>
<Mp4>
<Playback>
<VideoAutoBufferReadSize>153600</VideoAutoBufferReadSize>
<AudioAutoBufferReadSize>51200</AudioAutoBufferReadSize>
<OtherAutoBufferReadSize>1024</OtherAutoBufferReadSize>
<EnableAggMsgs>true</EnableAggMsgs>
<MaxAggMsgSize>65536</MaxAggMsgSize>
<MaxTracks>64</MaxTracks>
<MaxSampleSize>16777216</MaxSampleSize>
<AllowAnyAVCProfile>false</AllowAnyAVCProfile>
<AllowAnyAACProfile>false</AllowAnyAACProfile>
</Playback>
<Recording>
<MaxELSTEntries>100</MaxELSTEntries>
<MaxDataSampleDescriptions>10</MaxDataSampleDescriptions>
<MaxAudioSampleDescriptions>10</MaxAudioSampleDescriptions>
<MaxVideoSampleDescriptions>10</MaxVideoSampleDescriptions>
</Recording>
</Mp4>
<Raw>
<EnableAggMsgs>true</EnableAggMsgs>
<MaxAggMsgSize>65536</MaxAggMsgSize>
</Raw>
</Streams>
<Httpd enabled="${SERVER.HTTPD_ENABLED}">
<Directory>Apache2.2</Directory>
<Program>bin/httpd</Program>
<Options>-f ./conf/httpd.conf</Options>
<Service>FMSHttpd</Service>
</Httpd>
</Server>
<ServerDomain></ServerDomain>
</Root>
Application.xml
<Application>
<Process>
<Scope></Scope>
<Distribute numprocs="3">Instances</Distribute>
<LifeTime>
<RollOver></RollOver>
<MaxCores></MaxCores>
</LifeTime>
<MaxFailures>2</MaxFailures>
<RecoveryTime>0</RecoveryTime>
</Process>
<LoadOnStartup>false</LoadOnStartup>
<MaxAppIdleTime>-1</MaxAppIdleTime>
<JSEngine>
<RuntimeSize>1024</RuntimeSize>
<MaxGCSkipCount>-1</MaxGCSkipCount>
<MaxTimeOut>0</MaxTimeOut>
<ScriptLibPath>${APP.JS_SCRIPTLIBPATH}</ScriptLibPath>
<XMLSocket>
<MaxUnprocessedChars>4096</MaxUnprocessedChars>
</XMLSocket>
<NetConnection>
<ObjectEncoding>AMF3</ObjectEncoding>
</NetConnection>
<Security>
<RPC enable="false">
<Client>
<Method>
<Allow></Allow>
</Method>
</Client>
<NetConnection>
<Method>
<Allow>onStatus</Allow>
</Method>
</NetConnection>
<SharedObject>
<Method>
<Allow></Allow>
</Method>
</SharedObject>
<Stream>
<Method>
<Allow>onStatus</Allow>
</Method>
</Stream>
</RPC>
</Security>
</JSEngine>
<StreamManager>
<StorageDir></StorageDir>
<QualifiedStreamsMapping enable="false" />
<DuplicateDir appName="true"></DuplicateDir>
<CachePrefix type="path">?IP?</CachePrefix>
<CacheUpdateInterval></CacheUpdateInterval>
<MaxBufferRetries>128</MaxBufferRetries>
<ThrottleBoundaryRequest enable="false">8</ThrottleBoundaryRequest>
<ThrottleLoads enable="true">8</ThrottleLoads>
<ThrottleDisplayInterval>64</ThrottleDisplayInterval>
<EnhancedSeek zone="client">true</EnhancedSeek>
<KeyFrameInterval>60000</KeyFrameInterval>
<MaxStreamsBeforeGC>-1</MaxStreamsBeforeGC>
<Audio>
<CombineSamples>
<Subscribers>8</Subscribers>
<LoCPU>60</LoCPU>
<HiCPU>80</HiCPU>
<MaxSamples>0</MaxSamples>
</CombineSamples>
<SendSilence>
<Interval></Interval>
</SendSilence>
<NotifyAudioStop enabled="false">
<Duration></Duration>
</NotifyAudioStop>
</Audio>
<Live>
<AccumulatedIFrames>
<MaxTime>-1</MaxTime>
<MaxSize>-1</MaxSize>
</AccumulatedIFrames>
<Queue enabled="true">
<MaxQueueSize>4096</MaxQueueSize>
<MaxQueueDelay>500</MaxQueueDelay>
<FlushOnData>true</FlushOnData>
<AggregateMessages enabled="true">
<MaxAggMsgSize>-1</MaxAggMsgSize>
</AggregateMessages>
</Queue>
<PublishTimeout>2000</PublishTimeout>
<MaxLatency>500</MaxLatency>
<StartClockOnPublish>false</StartClockOnPublish>
<EraseOnPublish>true</EraseOnPublish>
</Live>
<SendDuplicateStart>true</SendDuplicateStart>
<SendDuplicateOnMetaData>true</SendDuplicateOnMetaData>
<Recording>
<MaxSize>-1</MaxSize>
<MaxSizeCap>-1</MaxSizeCap>
<MaxDuration>-1</MaxDuration>
<MaxDurationCap>-1</MaxDurationCap>
</Recording>
</StreamManager>
<SharedObjManager>
<StorageDir></StorageDir>
<DuplicateDir appName="true"></DuplicateDir>
<ResyncDepth>-1</ResyncDepth>
<LockTimeOut>-1</LockTimeOut>
<AutoCommit>true</AutoCommit>
<MaxProperties>-1</MaxProperties>
<MaxPropertySize>-1</MaxPropertySize>
</SharedObjManager>
<AllowHTTPTunnel>true</AllowHTTPTunnel>
<Client>
<WindowsPerAck>2</WindowsPerAck>
<Bandwidth override="yes">
<ServerToClient>2500000</ServerToClient>
<ClientToServer>2500000</ClientToServer>
</Bandwidth>
<BandwidthCap override="no">
<ServerToClient>5000000</ServerToClient>
<ClientToServer>5000000</ClientToServer>
</BandwidthCap>
<BandwidthDetection enabled="true">
<MaxRate>-1</MaxRate>
<DataSize>16384</DataSize>
<MaxWait>2</MaxWait>
</BandwidthDetection>
<MsgQueue>
<Live>
<MaxAudioLatency>2000</MaxAudioLatency>
<MinBufferTime>8000</MinBufferTime>
</Live>
<Recorded>
<MinBufferTime>2000</MinBufferTime>
</Recorded>
<Server>
<BufferRatio>0.5</BufferRatio>
<Prioritization>false</Prioritization>
<MinQueuedVideo>64</MinQueuedVideo>
</Server>
<Diagnostic>
<Enable>false</Enable>
</Diagnostic>
</MsgQueue>
<HTTPTunnel>
<IdlePostInterval>512</IdlePostInterval>
<IdleAckInterval>512</IdleAckInterval>
<MimeType>application/x-fcs</MimeType>
<WriteBufferSize>16</WriteBufferSize>
</HTTPTunnel>
<MaxMessageSizeLosslessVideo>0</MaxMessageSizeLosslessVideo>
<OutChunkSize>4096</OutChunkSize>
<AggregateMessages enabled="true"></AggregateMessages>
<Access>
<FolderAccess>false</FolderAccess>
<AudioSampleAccess enabled="false"></AudioSampleAccess>
<VideoSampleAccess enabled="false"></VideoSampleAccess>
</Access>
<UserAgent override="yes">
<Bits from="WIN 6,0,0,0" to="WIN 7,0,55,0">0x01</Bits>
<Bits from="MAC 6,0,0,0" to="MAC 7,0,55,0">0x01</Bits>
</UserAgent>
</Client>
<Debug>
<MaxPendingDebugConnections>50</MaxPendingDebugConnections>
<AllowDebugDefault>false</AllowDebugDefault>
</Debug>
<HTTP>
<HTTP_1_0>false</HTTP_1_0>
<Verbose>false</Verbose>
<Connections>
<MaxTimeout>60</MaxTimeout>
<Reuse>true</Reuse>
<Interface></Interface>
</Connections>
<Proxy>
<Host></Host>
<Port></Port>
<Type>HTTP</Type>
<Tunnel>false</Tunnel>
<Username></Username>
<Password></Password>
</Proxy>
<Redirect>
<Allow>true</Allow>
<Max>10</Max>
<UnrestrictedAuth>true</UnrestrictedAuth>
</Redirect>
</HTTP>
<SWFVerification enabled="false">
<SWFFolder></SWFFolder>
<MinGoodVersion></MinGoodVersion>
<DirLevelSWFScan>1</DirLevelSWFScan>
<MaxInitDelay>5</MaxInitDelay>
<FirstHashTimeout>5</FirstHashTimeout>
<FinalHashTimeout>60</FinalHashTimeout>
<UserAgentExceptions>
<Exception from="" to=""/>
</UserAgentExceptions>
<Cache>
<TTL>1440</TTL>
<UpdateInterval>5</UpdateInterval>
</Cache>
<ConnectionBlocking enabled="false"/>
</SWFVerification>
<Logging>
<Access>
<Checkpoints enable="false">
<LogInterval>3600</LogInterval>
</Checkpoints>
-->
</Access>
</Logging>
<DisallowedProtocols></DisallowedProtocols>
</Application>
Vhost.xml
<VirtualHost>
<AliasList>
<Alias name="alias1"></Alias>
</AliasList>
<AppsDir>${VHOST.APPSDIR}</AppsDir>
<ResourceLimits>
<MaxConnections>-1</MaxConnections>
<MaxEdgeConnections>-1</MaxEdgeConnections>
<MaxAppInstances>15000</MaxAppInstances>
<MaxStreams>250000</MaxStreams>
<MaxSharedObjects>50000</MaxSharedObjects>
<AppInstanceGC>-1</AppInstanceGC>
</ResourceLimits>
<VirtualKeys>
</VirtualKeys>
<VirtualDirectory>
<Streams></Streams>
</VirtualDirectory>
<DNSSuffix></DNSSuffix>
<Allow>all</Allow>
<Proxy>
<Mode>local</Mode>
<RequestTimeout>2</RequestTimeout>
<Anonymous>false</Anonymous>
<CacheDir enabled="false" useAppName="true">
<Path></Path>
<MaxSize>32</MaxSize>
</CacheDir>
<LocalAddress></LocalAddress>
<RouteTable protocol="">
<RouteEntry></RouteEntry>
</RouteTable>
<EdgeAutoDiscovery>
<Enabled>false</Enabled>
<AllowOverride>true</AllowOverride>
<WaitTime>1000</WaitTime>
</EdgeAutoDiscovery>
<SSL>
<SSLVerifyCertificate>true</SSLVerifyCertificate>
<SSLCACertificatePath></SSLCACertificatePath>
<SSLCACertificateFile></SSLCACertificateFile>
<SSLVerifyDepth>9</SSLVerifyDepth>
<SSLCipherSuite>ALL:!ADH:!LOW:!EXP:!MD5:@STRENGTH</SSLCipherSuite>
</SSL>
-->
<AggregateMessages enabled="true">
</AggregateMessages>
</Proxy>
<Logging>
<Access>
<Checkpoints enable="false">
<LogInterval>3600</LogInterval>
</Checkpoints>
-->
</Access>
</Logging>
</VirtualHost>Hello guys,
thanks for replying.
All intances spent 24h playing/streaming as expected but today some of them went down.
Any idea why this core is being deactivated?
master.log
2011-04-20 16:30:54 16109 (i)2581172 System memory load (90) is now below the maximum threshold. -
2011-04-20 16:30:55 16109 (w)2581171 System memory load (91) is high. -
2011-04-20 18:36:18 16109 (i)2581226 Edge (16129) is no longer active. -
2011-04-20 18:36:18 16109 (w)2581255 Edge (16129) _defaultRoot__edge1 experienced 1 failure[s]! -
2011-04-20 18:36:18 16109 (i)2581224 Edge (28483) started, arguments : -edgeports ":1935,80" -coreports "localhost:19350" -conf "/opt/adobe/fms/conf/Server.xml" -adaptor "_defaultRoot_" -name "_defaultRoot__edge1". -
2011-04-20 18:53:25 16109 (i)2581223 Core (16132) is no longer active. -
2011-04-20 18:53:25 16109 (i)2581221 Core (28621) started, arguments : -adaptor "_defaultRoot_" -vhost "_defaultVHost_" -app "registry" -inst "registry" -tag -conf "/opt/adobe/fms/conf/Server.xml" -name "_defaultRoot_:_defaultVHost_:registry:registry:".-
2011-04-20 18:57:25 16109 (i)2581223 Core (28621) is no longer active. -
2011-04-20 18:57:25 16109 (i)2581221 Core (28814) started, arguments : -adaptor "_defaultRoot_" -vhost "_defaultVHost_" -app "registry" -inst "registry" -tag -conf "/opt/adobe/fms/conf/Server.xml" -name "_defaultRoot_:_defaultVHost_:registry:registry:".-
2011-04-20 19:00:15 16109 (i)2581172 System memory load (61) is now below the maximum threshold. -
2011-04-20 19:00:28 16109 (i)2581223 Core (16752) is no longer active. -
2011-04-20 19:00:28 16109 (w)2581256 Core (16752) _defaultRoot_:_defaultVHost_:::_1 experienced 1 failure[s]! -
2011-04-20 19:00:28 16109 (i)2581221 Core (29004) started, arguments : -adaptor "_defaultRoot_" -vhost "_defaultVHost_" -app -inst -tag "_1" -conf "/opt/adobe/fms/conf/Server.xml" -name "_defaultRoot_:_defaultVHost_:::_1".
core.log
2011-04-20 16:30:56 16132 (w)2581171 System memory load (91) is high. -
2011-04-20 18:36:16 16752 (i)2581247 Core (16752) disconnected from edge. -
2011-04-20 18:36:16 16548 (i)2581247 Core (16548) disconnected from edge. -
2011-04-20 18:36:16 16962 (i)2581247 Core (16962) disconnected from edge. -
2011-04-20 18:36:16 16132 (i)2581247 Core (16132) disconnected from edge. -
2011-04-20 18:36:21 16962 (i)2581246 Core (16962) sending register cmd to edge. -
2011-04-20 18:36:21 16752 (i)2581246 Core (16752) sending register cmd to edge. -
2011-04-20 18:36:21 16548 (i)2581246 Core (16548) sending register cmd to edge. -
2011-04-20 18:36:22 16132 (i)2581246 Core (16132) sending register cmd to edge. -
#Date: 2011-04-20
#Fields: date time x-pid x-status x-ctx x-comment
2011-04-20 18:53:27 28621 (i)2581246 Core (28621) sending register cmd to edge. -
2011-04-20 18:53:30 28621 (w)2581171 System memory load (99) is high. -
#Date: 2011-04-20
#Fields: date time x-pid x-status x-ctx x-comment
2011-04-20 18:57:27 28814 (i)2581246 Core (28814) sending register cmd to edge. -
2011-04-20 18:57:29 28814 (w)2581171 System memory load (99) is high. -
2011-04-20 19:00:16 16962 (i)2581172 System memory load (61) is now below the maximum threshold. -
2011-04-20 19:00:15 28814 (i)2581172 System memory load (66) is now below the maximum threshold. -
2011-04-20 19:00:16 16548 (i)2581172 System memory load (61) is now below the maximum threshold. -
#Date: 2011-04-20
#Fields: date time x-pid x-status x-ctx x-comment
2011-04-20 19:00:29 29004 (i)2581237 Starting admin app on core (29004). -
2011-04-20 19:00:29 29004 (i)2581238 Core (29004) connecting to admin. -
2011-04-20 19:00:29 29004 (i)2581231 Core (29004) connected to admin. -
2011-04-20 19:00:29 29004 (i)2581234 Core (29004) connection to admin accepted. -
2011-04-20 19:00:29 29004 (i)2581246 Core (29004) sending register cmd to edge. -
# free -m
total used free shared buffers cached
Mem: 7993 6076 1917 0 4 34
-/+ buffers/cache: 6037 1956
Swap: 3147 1558 1589
thank you! -
L2TP script to initiate a router reload when tunnel goes down - working
Hi,
Just thought I would post a working EEM script on doing a router reload when the L2TP tunnel goes down....
I am using a 3825 router to initiate a site-to-site tunnel with a 3rd party vpn service - StrongVPN. On the odd occasion when the tunnel goes down, the l2tp tunnel state goes to "no session left" and the virtual-ppp1 interface - which is tied to the l2tp vpn - goes down. Unfortunately, because I have no control on the far end router, the only way to bring it back up is thru a router reload....
Here you go:
event manager applet L2TP-DOWN
event syslog pattern "%LINEPROTO-5-UPDOWN: Line protocol on Interface Virtual-PPP1, changed state to down"
action 1.0 syslog msg "The L2TP VPN is down"
action 1.1 cli command "enable"
action 1.2 cli command "reload in 10" pattern "confirm"
action 1.3 cli command ""
action 1.4 syslog msg "EEM scheduled reload in 10 minutes"
event manager applet L2TP-UP
event syslog pattern "%LINEPROTO-5-UPDOWN: Line protocol on Interface Virtual-PPP1, changed state to up"
action 1.0 syslog msg "The L2TP VPN is up"
action 1.1 cli command "enable"
action 1.2 cli command "reload cancel"
JasonHi Arie,
So, here is the script I am using....
When the L2TP tunnel goes to "no sessions left", the virtual-ppp1 interface goes down. That's the typical message I get when it goes down. So, when I reboot the router, the script shows the message that the virtual-ppp1 interface is up when the L2TP tunnel comes up. I checked the debugs and that is the behaviour when the tunnel goes up / down...
Here you go:
event manager applet L2TP-DOWN
event syslog pattern "%LINEPROTO-5-UPDOWN: Line protocol on Interface Virtual-PPP1, changed state to down"
action 1.0 syslog msg "The L2TP VPN is down"
action 1.1 cli command "enable"
action 1.2 cli command "reload in 10" pattern "confirm"
action 1.3 cli command ""
action 1.4 syslog msg "EEM scheduled reload in 10 minutes"
event manager applet L2TP-UP
event syslog pattern "%LINEPROTO-5-UPDOWN: Line protocol on Interface Virtual-PPP1, changed state to up"
action 1.0 syslog msg "The L2TP VPN is up"
action 1.1 cli command "enable"
action 1.2 cli command "reload cancel"
Thanks. -
What cause black screen down with forced turn off notice?
My mac book pro is just 4months old. I had some probelm and replaced logic boad a month ago.
But I suddenly experience that black screen going down with forced turn off notice.
I was so scared I will have a serious probelm again or not. Hence is there anyone when this sign shows?
And ther other issues, just checked console
Thus I checked console there is error apple: dock.agent KCGError IllegalArguement: CGSSet Window trasform at placment: singular matrix (please attach the file).
is there anyone who knows what causes this error and how I can fix it?
Thank you in advance.
Best wishes
JoonTry:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
i am using i phone 5S with Wifi and digisol Router and Hathway Internet service provoder,
as i on i phone 5S wifi , sysytem goes down.
with same router and service provider, i am also using samsung product. but nothing goes off
Has anyone has solution?Hello
I have the same problem and I keep waiting for the next software update maybe it will be resolved there
Unfortunately I do not have a solution -
Cisco 3925 router with an ATM E3 card that never goes down!
Hi all,
We a Cisco 3925 router with an ATM E3 card (NM-1A-T3/E3) configured as below with 1 PVC. we see that the ATM subinterface we created for the PVC never goes down! not even when the WAN link is down! The problem with this is we are tracking the line protocol of the ATM sub interface to have VRRP failover to standby router. But because of this issue only BGP goes down whenever the WAN is down & line-protocol of the Subinterface remains up, the failover never happens & site is down. We can configure VRRP to track reachability of a BGP route as workaround but I would like an explanation or troubleshooting steps to check whats the trouble with current setup?
Cisco IOS Software, C3900 Software (C3900-UNIVERSALK9-M), Version 15.1(2)T4.1, MAINTENANCE INTERIM SOFTWARE
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2011 by Cisco Systems, Inc.
Compiled Tue 30-Aug-11 08:44 by prod_rel_team
card type e3 1
interface ATM1/0
description Link to PE
mtu 1500
bandwidth 34010
no ip address
no ip proxy-arp
logging event subif-link-status
no atm ilmi-keepalive
no atm enable-ilmi-trap
end
interface ATM1/0.101 point-to-point
description PVC to MPLS PE
mtu 1500
bandwidth 2500
ip address a.b.c.d 255.255.255.252
no ip proxy-arp
ip flow monitor FMforIP4in sampler ata1to100 input
ip flow monitor FMforIP4out sampler ata1to100 output
ip nat outside
ip virtual-reassembly in
no atm enable-ilmi-trap
snmp trap link-status
pvc 1/101
vbr-nrt 8192 8192 1
vc-hold-queue 2048
oam-pvc manage
oam retry 3 5 1
oam ais-rdi 15 3
encapsulation aal5snap
protocol ip inarp
queue-depth 5 3
service-policy out Edge_Queueing
end
Thanks a lot in advance!Your router has some configuration on it already and it would help us give you better advice if we knew what is already in the configuration. So would you post the output of show running-config (if there is sensitive information like addresses and passwords you can mask them out.
Changing the configuration register was a good start. I have a couple questions/observations that may help you get started. I notice what appears to be the same public IP address on Gig0/0 and on multilink. Did you get that address from your ISP? If so what kind of connection do you have to the ISP?
In your description you tell us that Gig0/0 is connected to a small switch, which I assume is for the LAN of your network. But that also is the interface where the public address is configured. So I am confused whether this interface is for LAN or for connecting to the ISP. Can you clarify this?
HTH
Rick -
One interface of pair goes down
Hi
If two interfaces are paired into one group and one interface of pair goes down, will the second interface will be declared as down by IPS?Hi,
I I have a problem connected to this issue.
I have only one IPS4270-20 with software 7.0(7)E4 and I use 2 IF pairs on it. Both IF pairs are for the same operation, and they were implemented for HA purposes. We have two 6500 chassis in VSS and all of the IPS ports connected to these switches. Gi3/0-Gi3/1 and Gi1/2-Gi3/3 are in pair, and Gi3/0-Gi3/2 are the inbound and Gi3/1-Gi3/3 are the outbound interfaces, so it achieves the hardwer failover requirements. Inbound IFs creat an Etherchannel, and outbound IFs creat an other Etherchannel, so we try to prevent an L2 loop when VSS breaks.
The issue what I can't solve is the following:
If I shut down the 6500 IF what is connected to the IPS Gi3/0 I would like Gi3/1 to goes down, but it isn't the case.
I tried to use LACP in the Etherchannel, so when Gi3/0 goes down, the 6500 port which connected to the IPS Gi3/1 should be removed from the Etherchannel, but it isn't the case also.
Do you have an idea, what could be the problem, or I should redesign the topology?
Thanks,
Miki
Maybe you are looking for
-
Exchange 2013 installation Problem on Hyper-V
Hello, I have a very interesting problem Exchange 2013 installation step on Hyper-V. I have 2 server. I installed on server Server 2012 R2 Standart. And then installed hyper-v role for both server. I created virtual machine for first server and this
-
Problem in moving iTunes Music Folder
I feel sooo stupid! I am using the document "iTunes: Moving your iTunes Music folder." I was going along OK until I came to number 5 in the second part: "In the Change Music Folder Location window that appears, navigate to the location where you woul
-
What is 4m0t/4/40000002: exhaust -0 error? black creen also.
I need help lol... I have this macbook 2012 mid 13 inch and all of a sudden this morning it stopped working... like it turns on the keyboard and everything but the screen doesn't turn on and with a flashlight I can see the screen so it's like the bac
-
Apple: encrypted backup facility in Time Machine, please
A couple I know have had Macs and their backup hard drives stolen. The robbers now have access to all their data, including their customers' confidential records. When I heard about this I immediately set my own computer to use a password after a bri
-
I re-partitioned my hard drive last week. Before doing this i backed up only the files i wanted to keep to another mac. I now want to transfer 2 user accounts back. how do i do this? I tried dropping them into the users folder but they are not recogn