Interface help needed (Edirol FA-66) - works with Tiger, not Leopard

I have an Edirol FA66 that works fine on my Macbook running Tiger, but doesn't show up as a device on my iMac running Leopard. Can anyone help please? Thanks....

I used Edirol FA-66 interface successfully with my Intel iMac using Tiger & Logic, iTunes etc for a year, and it worked great. I upgraded from 10.4.4 to 10.4.11 when the system wouldn't recognize M-Audio Radium keyboard. After the upgrade keyboard is on board but now FA-66 doesn't work at all, crackles, static, no sound or device recognition. Must be some glitch in 10.4.11..? Downgraded and the keyboard is gone. Upgraded and the interface is gone. Crazy!
If I buy Leopard, will it resolve both?? I don't want to get Leopard and weigh down my system with all the stuff that goes with it and have the Edirol stuck in the same situation. Is there anyone out there who has experienced this and can recommend a particular version of Leopard?
Thank you
Mara

Similar Messages

Help needed I updated my ipad2 with iOS5 but few of my dashbaords are not working now can any one let me know how to downgrade the OS

Help needed I updated my ipad2 with iOS5 but few of my dashbaords (HTML5) are not working now ,can any one let me know how to downgrade the OS as we have a meeting coming up .. its urgent

Downgrading the iOS is not supported. If you are using Safari this try clearing its cache via Settings > Safari.
If that doesn't work then try closing Safari completely and then re-open it : from the home screen (i.e. not with Safari 'open' on-screen) double-click the home button to bring up the taskbar, then press and hold any of the apps on the taskbar for a couple of seconds or so until they start shaking, then press the '-' in the top left of the Safari app to close it, and touch any part of the screen above the taskbar so as to stop the shaking and close the taskbar.
A third option is a reset : press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot.

Hi, help me on how to work with datasets

hi,
this is bsv. can any one help me on how to work with datasets.
regards...
srinivas

Hi,
Use this update statement.
Update
nv2_audit_log
Set
qualifier = replace(qualifier,'NXPRI','NXUPM')
Where
qualifier like '%NXPRI%NXUPM%';
Hope this helps!
Regards,
Rajesh.

Is there any where that I can voice why I returned my beloved new Ipad? I was told I could move my Keynote presentations to it and then use it for my business presentations. Unfortunately that turned out to not be true. I need the IPad to work with a remo

Is there any where that I can voice why I returned my beloved new Ipad? I was told I could move my Keynote presentations to it and then use it for my
business presentations. Unfortunately that turned out to not be true. I need the IPad to work with a remote.
The Ipad is on a short cable to my projector. I am usually on a podium 30 feet away. No infra red receiver on the IPad and
the Iphone remote needs wi fi which is not always available in all the locations I do my teaching and lecturing in.
If you can build a remote into the Ipad in the future I would really like to use an Ipad to replace my heavier lap top for business travel. Thank You Kathy McNeil.

"The Ipad is on a short cable to my projector."
Get a longer cable?

I have an ipod touch and just updated my software to ios 7.1.2. Now I get the message that my adapter, accessory does not support my device. Is there a new adapter that I need to buy that works with the ios 7.1.2?

i have an ipod touch and just updated my software to ios 7.1.2. Now I get the message that my adapter, accessory does not support my device. Is there a new adapter that I need to buy that works with the ios 7.1.2?

This is not my problem. However, I think it may be related to an old speaker. I was using the 30 pin adapter for about a week after the upgrade to 7.1.2. But I think with the update the speaker won't work anymore. I will try with a new speaker system. Thank you for trying to assist.

I m coming from linux platform ... now need my g to work with vim ... how to install g which supports C 0x ... why does not it has repository with apple ... its so easy rather than going to UI ...

i m coming from linux platform ... now need my g to work with vim ... how to install g which supports C 0x ... why does not it has repository with apple ... its so easy rather than going to UI ...

tom i have been using ubuntu for c++ project
i use lambda and atomic (c++0x) but now as I am working on MAC not able to use them
installed xcode(4.3) and changed compiler settings to LLVM3.1 but still both features are not available
to compile wanted to have g++ which supports c++0x features ...
new to MAC (2-3 days) so was in rush to solution
let me know if you have some suggestion ...
else will try with eclipse cdt ....

HELP PLEASE! I am working with GH4 4k footage in adobe preimere and the computer keeps freezing... any ideas?

HELP PLEASE! I am working with GH4 4k footage in adobe preimere and the computer keeps freezing... any ideas?

Thanks for your response. I'm sorry for the lack of details, but posting a question on this forum is completly new to me, so I guess I am learning how it works.
I have to be honest, I am a novice to video editing, but I am here to learn so I will provide all the info I know and please let me know if it is enough...
I filmed my first feature film on a Panasonic GH4. We filmed in 4k (compressed files). I am about 900 GB of total files for all the footage. I am currently editing on a 17' Toshiba Satellite i7 with 750 GB of space and I believe 8 gb of ram. All of the footage for the film is not on the computer, but stored on a 1 TB external hardrive (Rugged Lacie is the name of the hard drive). I am using a usb 3.0 from the hard drive to the computer.
I actually was able to get through about 17 mins of edits for the film before I started to experiencing the computer completely freezing up on me. I tried using a different hard drive, and same issue. A friend mentioned it might just be the computer is not powerful enough to edit all the footage, but he wasn't for sure considering the computer is less than a year old and is on the higher end for a toshiba.
I am requesting advice on how to continue editing the film without the computer crashing if that is even possible with using the same computer. If not what would be my options?
Thank you!

My Mbox2 won't work with tiger 10.4

I am quite new to computor recording and bought an Mbox2 to record live guitar and vocals. My last recording system was the original Teac Portastudio. ($2000.00 in 1983) I love Garage Band for being so user friendly, but was concered that I would not be able to achieve a professional enough sounding final product. As the Mbox2 comes with Pro Tools, I thought I would give it try and take the plunge into learning Pro Tools. I guess I got in way over my head because I could not get the Mbox working. I originaly had purchased the Presonus Firebox, but the mixer would not work and the control panel would not open. I was able to use the Firebox for my guitar and my vocal mic and actually had a great time laying down a few live tracks then adding some midi tracks with Garage Band.I could not get into the cubase program that came with the Firebox and when I called thier tech support was told the mixer and control panel would not work with tiger 10.4. That was when I decided to try the Mbox. However,after my frustrating experience with the Mbox2, I am thinking of returning to the Firebox just so I can plug in my guitar and mic again. Is there another DAW out there that is compatible with my intel iMac tiger OS X 10.4, or would it be simpler for me to buy a pre amp/mixer and use the audio in on my mac? I would appreciate some help with this. Thanks.

"Could you recommend a pre amp mixer combination?
Would a Radio Shack quality do? I am working towards
producing a CD to sell from the stage at local gigs
so I do want good sound."
Hi Angelman. What is your budget for the mixer? What
type of inputs will you need? I'd stay away from
Radio Shack if you plan on producing/selling a CD.
BTW- some people are having problems with the
multimix (distorted outputs). If you're on a
tight budget I'd hold off on them for the time being
until they iron out what's wrong. Presonus Inspire is
OK, as is Tascam and M-Audio. It all depends on your
budget and what kind of inputs you'll need.
I have Martin D28 with an active pick up that I run through an LR Baggs DI box xlr out. I want to run a line out and record the line output as track 1. Next I have good quality condenser mics and would like to use one or more to record the guitar as track 2 and 3. I also want to record a dummy, or keeper vocal track while laying down the guitar tracks. I would be hapopy with 1 line out guitar, 1 condenser guitar mic and 1 vocal mic.( 3 tracks 2 guitar 1 vocal) As for my budget, I have been saving up for a long time and am returning my newly purchased Mbox2 $550.00 and thinking now of returning to the Presonus Firebox. I was wondering since I am not interested in the Qbase software that comes with the firebox, and since I can plug my M Audio controller keyboard directly into the Imac, I really don't require the midi capabilities of the Firebox and was looking into the less expensive Inspire. I am already into the cost of the Firebox, and it did work well for me, but I didn't hang on to it long enough to fully explore its capabilites. I would be happy to give the Firebox another try. If I did, would I need to install the Qbase software or could I just plug in the firebox and start recording? Thanks for your input. Much appreciated.
imac Mac OS X (10.4.5) For music creation only

An SCSI card that works with tiger?

I have aquired a Sony SDX S500C AIT-2 drive that I wish to use with my quicksilver G4 server. I need an Ultra wide SCSI card that will work with tiger. I thought this wouldn't be a problem, but after picking up the drive for cheap on eBay it now looks really hard to find anything that works with tiger for less than $400. Does anyone have any experience of an SCSI setup that actually works? The Initio Miles 9100UW looks promising, but according to the Dantz site it is not supported by retrospect, but I assume this doesn't necessarily mean that it doesn't work...
Looking forward to hearing your experiences.

Cards from ATTO work with OS X, and are highly reliable.

I created an application and in that application if date is changed the application starts from splash screen on re-entering and if date is not changed and u re-enters the application then it open in page where u leaved.It works with iPod not with iPhone

I created an application and in that application if date is changed the application starts from splash screen on re-entering and if date is not changed and u re-enters the application then it open in page where u leaved.It works with iPod not with iPhone

Try posting in the developer forums to see if you can get some assistance,you'll have to be a registered developer for access though.
developer.apple.com

Why doesn't LightScribe work with my Snow Leopard?

Why doesn't LightScribe work with my Snow Leopard? It downloaded and is in my printer folder, but won't open.

Are you really still running 10.6.3? If you are you should run the combo update as many issues were resolved within the updates themselves.
Mac OS X 10.6.8 Update Combo v1.1

Will a LaCie 20gb PocketDrive work with Tiger??

I have an iMac G4 17" want to upgrade to Tiger. LaCie's site does not provide support/new drivers for this FireWire drive. Can I get it to work with Tiger or should I purchase a new removable drive?
Thanks!
Bill

Hello again Bill,
Just another 2 penneth...
My own drive was on Panther and is now on Tiger. Its a Maxtor, there were some issues when the change came. None serious though. Let me, or any one else for that matter, know via here or via email. Details in my profile.
Cheers
Ian

Will BlazeDS work with Flash (not Flex or AIR)?

Does anyone know if Blaze can work with Flash(not flex or AIR)?
If so, how? Any examples?
Thanks,
James

Hallo Russell, I'm a beginner with Flex and Flash, and I already succeeded calling the remote object with Flex. But my company requires me to use Flash (AS3). So, could you please give me an example of ActionScript code to call a RemoteObject in BlazeDs? The url? and call string? I also use Spring behind. I tried to use the url: "http://localhost:8080/myAppName" and then the call string is "myService.getList" myService is the destination in the service-config.xml getList is the method from the remote object which is a Java class. Here is the snippet from remoting-config <destination id="clasificationService"> <properties> <factory>spring</factory> <source>clasificationManager</source> </properties> </destination> and Here is the snippet from services-config:  <factories> <factory id="spring" class="com.airbus.cm.cd.controller.SpringFactory" /> </factories> <channels> <channel-definition id="channel-amf" class="mx.messaging.channels.AMFChannel"> <endpoint url="http://{server.name}:{server.port}/{context.root}/messagebroker/amf" class="flex.messaging.endpoints.AMFEndpoint" /> <properties> <polling-enabled>false</polling-enabled> </properties> </channel-definition> <channel-definition id="my-secure-amf" class="mx.messaging.channels.SecureAMFChannel"> <endpoint url="https://{server.name}:{server.port}/{context.root}/messagebroker/amfsecure" class="flex.messaging.endpoints.SecureAMFEndpoint"/> <properties> <add-no-cache-headers>false</add-no-cache-headers> </properties> </channel-definition> <channel-definition id="my-polling-amf" class="mx.messaging.channels.AMFChannel"> <endpoint url="http://{server.name}:{server.port}/{context.root}/messagebroker/amfpolling" class="flex.messaging.endpoints.AMFEndpoint"/> <properties> <polling-enabled>true</polling-enabled> <polling-interval-seconds>4</polling-interval-seconds> </properties> </channel-definition> </channels> Best regards, Raymond.

Will Final Cut Express 2.0.3 work with Tiger 10.4.4

Will Final Cut Express 2.0.3 work with Tiger 10.4.4

We have it running on our iMac G5s. Although it runs reasonably well, there are some teething problems with it. One of them is we cannot capture from a camcorder using timecodes because it just crashes when we try and do that, so we can only capture using the "DV Convertor" mode. Not unreasonable, but slightly annoying.
We also have the problem that, when we brought some new iMac G5s recently with the iSight built in, it wouldn't work at all because it didn't seem to realise that a PCI-Express graphics card was actually a graphics card at all, and it kept demanding we install an AGP one, which was a bit stupid.
Apart from that, it's definitely useable. No crashes or anything like that. And we use it daily.

HT5463 Does alarm work with do not disturb??

Does alarm work with do not disturb??

https://discussions.apple.com/message/21256836#21256836
From the More Like This section on the right

Interface help needed (Edirol FA-66) - works with Tiger, not Leopard

Similar Messages

Maybe you are looking for