Interface in XI2.0
Hi All,
could any one send me one end-to-end interface that created in 2.0 (please dont send me 3.0).as i am studying the 2.0 system for better understanding i need one end-to-end scenario i mean with screen shots.if anyone can that will help me out of this confusion of understanding XI2.0.....
Regards
Kumar
Hi,
I think you can not handle this problem with keyFieldName/keyFieldValue.
In my opinion with keyFieldName/keyFieldValue you can create different substructures of the same XML, but you can not seperate messages with the same substructure.
But I don't know how to handle your problem ;-(
Another point is that I see a dot after xml.IDOC.keyFieldValue=BE10.
My be this is a problem too.
Christoph
Similar Messages
-
Problems with SOAP Adapter/Interface
Hi Experts,
we currently try and experiment with XI 3.0 Stack 09 and the SOAP adapter respectively.
We started with a simple interface (foo..., see wsdl attachment) that we want to provide by XI.
All configurations (SLD, Integration Repository, Integration Directory) should have been done accordingly as we suppose, similar to other szenarios we have already implemented.
When we send a SOAP request based on a generated wsdl to XI we get the exception at the bottom of this text, containing e.g.
com.sap.aii.messaging.srt.BubbleException: error during conversion [null "null"];
com.sap.aii.messaging.util.XMLScanException: Parsing an empty source. Root element expected!
For sending the SOAP message we used XMLSpy.
Did someone have similar problems or can give us an working WSDL example, or some hint?
Thanks in advance,
Klaus Lukas
foo.wsdl
<?xml version="1.0" encoding="ISO-8859-1"?>
<wsdl:definitions xmlns:wsdl="http://schemas.xmlsoap.org/wsdl/" xmlns:p1="urn://poreceive.xi.pse.siemens.com" targetNamespace="urn://poreceive.xi.pse.siemens.com" name="foo_out_sync">
<wsdl:types>
<xsd:schema xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns="urn://poreceive.xi.pse.siemens.com" targetNamespace="urn://poreceive.xi.pse.siemens.com">
<xsd:element name="foo" type="foo_DT"/>
<xsd:complexType name="foo_DT">
<xsd:annotation>
<xsd:appinfo source="http://sap.com/xi/TextID">
fe0bb241d2a011d9cd15e9729ee2f568
</xsd:appinfo>
</xsd:annotation>
<xsd:sequence>
<xsd:element name="item" type="xsd:string">
<xsd:annotation>
<xsd:appinfo source="http://sap.com/xi/TextID">
fe0bb240d2a011d9acede9729ee2f568
</xsd:appinfo>
</xsd:annotation>
</xsd:element>
</xsd:sequence>
</xsd:complexType>
</xsd:schema>
</wsdl:types>
<wsdl:message name="foo">
<wsdl:part name="foo" element="p1:foo"/>
</wsdl:message>
<wsdl:portType name="foo_out_sync">
<wsdl:operation name="foo_out_sync">
<wsdl:input message="p1:foo"/>
<wsdl:output message="p1:foo"/>
</wsdl:operation>
</wsdl:portType>
<wsdl:binding name="foo_out_syncBinding" type="p1:foo_out_sync">
<soap:binding xmlns:soap="http://schemas.xmlsoap.org/wsdl/soap/" style="document" transport="http://schemas.xmlsoap.org/soap/http"/>
<wsdl:operation name="foo_out_sync">
<wsdl:input>
<soap:body xmlns:soap="http://schemas.xmlsoap.org/wsdl/soap/" use="literal"/>
</wsdl:input>
<wsdl:output>
<soap:body xmlns:soap="http://schemas.xmlsoap.org/wsdl/soap/" use="literal"/>
</wsdl:output>
</wsdl:operation>
</wsdl:binding>
<wsdl:service name="foo_out_syncService">
<wsdl:port name="foo_out_syncPort" binding="p1:foo_out_syncBinding">
<soap:address location="http://xxxxxxxx:8000/XISOAPAdapter/MessageServlet?channel=:Foo_SOAP_Service:SOAP_Foo_out&version=3.0&Sender.Service=Foo_SOAP_Service&Interface=urn%3A%2F%2Fporeceive.xi.pse.siemens.com%5Efoo_out_sync" xmlns:soap="http://schemas.xmlsoap.org/wsdl/soap/"/>
</wsdl:port>
</wsdl:service>
</wsdl:definitions>
soap message incl. error
<?xml version="1.0"?>
<!-- see thedocumentation -->
<SOAP:Envelope xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/">
<SOAP:Body>
<SOAP:Fault>
<faultcode>SOAP:Server</faultcode>
<faultstring>error during
conversion</faultstring>
<detail>
<s:SystemError
xmlns:s="http://sap.com/xi/WebService/xi2.0">
<context>XIAdapter</context>
<code>XMLScanException</code>
<text><![CDATA[
com.sap.aii.af.mp.module.ModuleException
at com.sap.aii.af.mp.soap.ejb.XISOAPAdapterBean.process
(XISOAPAdapterBean.java:697)
at
com.sap.aii.af.mp.module.ModuleLocalLocalObjectImpl3.process
(ModuleLocalLocalObjectImpl3.java:103)
at com.sap.aii.af.mp.ejb.ModuleProcessorBean.process
(ModuleProcessorBean.java:221)
at
com.sap.aii.af.mp.processor.ModuleProcessorLocalLocalObjectImpl0.process
(ModuleProcessorLocalLocalObjectImpl0.java:103)
at com.sap.aii.af.mp.soap.web.MessageServlet.doPost
(MessageServlet.java:543)
at javax.servlet.http.HttpServlet.service
(HttpServlet.java:760)
at javax.servlet.http.HttpServlet.service
(HttpServlet.java:853)
at
com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet
(HttpHandlerImpl.java:385)
at
com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleReques
t(HttpHandlerImpl.java:263)
at
com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet
(RequestAnalizer.java:340)
at
com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet
(RequestAnalizer.java:318)
at
com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebConta
iner(RequestAnalizer.java:821)
at
com.sap.engine.services.httpserver.server.RequestAnalizer.handle
(RequestAnalizer.java:239)
at com.sap.engine.services.httpserver.server.Client.handle
(Client.java:92)
at com.sap.engine.services.httpserver.server.Processor.request
(Processor.java:147)
at
com.sap.engine.core.service630.context.cluster.session.ApplicationSessio
nMessageListener.process(ApplicationSessionMessageListener.java:37)
at
com.sap.engine.core.cluster.impl6.session.UnorderedChannel$MessageRunner
.run(UnorderedChannel.java:71)
at com.sap.engine.core.thread.impl3.ActionObject.run
(ActionObject.java:37)
at java.security.AccessController.doPrivileged(Native Method)
at com.sap.engine.core.thread.impl3.SingleThread.execute
(SingleThread.java:94)
at com.sap.engine.core.thread.impl3.SingleThread.run
(SingleThread.java:162)
Caused by: com.sap.aii.messaging.srt.BubbleException: error during
conversion [null "null"]; nested exception caused by:
com.sap.aii.messaging.util.XMLScanException: Parsing an empty source.
Root element expected!
at
com.sap.aii.messaging.srt.xmb.XMBWebServiceExtension.onResponseToWS
(XMBWebServiceExtension.java:936)
at
com.sap.aii.messaging.srt.xmb.XMBWebServiceExtension.invokeOnResponse
(XMBWebServiceExtension.java:602)
at com.sap.aii.messaging.srt.ExtensionBubble.onMessage
(ExtensionBubble.java:58)
at com.sap.aii.af.mp.soap.ejb.XISOAPAdapterBean.process
(XISOAPAdapterBean.java:576)
... 20 more
Caused by: com.sap.aii.messaging.util.XMLScanException: Parsing an
empty source. Root element expected!
at com.sap.aii.messaging.util.StreamXMLScannerImpl.open
(StreamXMLScannerImpl.java:104)
at com.sap.aii.messaging.mo.DefaultItem.setData
(DefaultItem.java:294)
at
com.sap.aii.messaging.srt.xmb.XMBWebServiceExtension.makeItemFromPayload
(XMBWebServiceExtension.java:972)
at
com.sap.aii.messaging.srt.xmb.XMBWebServiceExtension.onResponseToWS
(XMBWebServiceExtension.java:879)
... 23 more
]]></text>
</s:SystemError>
</detail>
</SOAP:Fault>
</SOAP:Body>
</SOAP:Envelope>Hi Klaus
In your wsdl file the soap address tag (given below)
<b><soap:address location="http://xxxxxxxx:8000/XISOAPAdapter/MessageServlet?channel=:Foo_SOAP_Service:SOAP_Foo_out&version=3.0&Sender.Service=Foo_SOAP_Service&Interface=urn%3A%2F%2Fporeceive.xi.pse.siemens.com%5Efoo_out_sync" xmlns:soap="http://schemas.xmlsoap.org/wsdl/soap/"/></b>
is to be edited as
<b><soap:address location="http://xxxxxxxx:50000//XISOAPAdapter/MessageServlet?channel=:Foo_SOAP_Service:SOAP_Foo_out" /></b>
because the soap address format should be like :
<i>http://host:port/XISOAPAdapter/MessageServlet?channel=party:service:channel</i>
For more information :
http://help.sap.com/saphelp_nw04/helpdata/en/0d/5ab43b274a960de10000000a114084/frameset.htm
Hope this will be helpful.
Regards
Suraj -
Hi,
I am testing a SOAP Sender Channel using a SOAP Client and getting the following error. I have read almost all the posts related to errors in SOAP Channel and also have checked my URL which is correct. AS mentioned in many of the posts, my url goes like
https://<host>:<port>/XISOAPAdapter/MessageServlet?channel=:DEMO:SOAP_s_GETLIST&version=3.0&SenderService=DEMO&interface=si_os_GETLIST&interfaceNamespace=<namespace>
This is the error that I get when sending a message to the interface
<SOAP:Envelope xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/">
<SOAP:Body>
<SOAP:Fault>
<faultcode>SOAP:Server</faultcode>
<faultstring>Server Error</faultstring>
<detail>
<s:SystemError xmlns:s="http://sap.com/xi/WebService/xi2.0">
<context>XIAdapter</context>
<code>ADAPTER.JAVA_EXCEPTION</code>
<text>com.sap.engine.interfaces.messaging.api.exception.MessagingException: com.sap.engine.interfaces.messaging.api.exception.MessagingException: XIProxy:PARSE_APPLICATION_DATA:
at com.sap.aii.adapter.soap.ejb.XISOAPAdapterBean.process(XISOAPAdapterBean.java:1041)
at sun.reflect.GeneratedMethodAccessor1044_10001.invoke(Unknown Source)*
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:585)
</s:SystemError>
</detail>
</SOAP:Fault>
</SOAP:Body>
</SOAP:Envelope>
Has Anybody got this problem before? Is it any problem with the SOAP Adapter itself or with the data that is going in the message? If so, What is the possible solution for this?
Thanks,
Rashmi.Hi Rashmi,
I also think your problem is data related.
Check the response in your SAP PI message monitor (SXMB_MONI) when you trigger a request using SoapUI. It sometimes provides a bit more detail. You design (data types, message types, service interfaces etc.) was done in SAP PI 7 then an Abap Proxy was generated from the service interface?
Sometimes there is an issue between the XSD data type declaration in SAP PI and the conversion to Abap data types that takes place when a proxy is generated from a PI Service Interface.
Check the data that you pass in your request, especially those like datetime fields. Maybe even change some of the data type definitions (like datetime) to a string (request & response) & then test through SoapUI & see if you still get the error. Then you can work out how to best resolve it.
Best Regards, Trevor -
Hi All,
Good Day,at the moment we having XI2.0 system and client want to upgrade to PI 7.0 .first of all is this upgrading is going to work with old interfaces.if yes what are the steps we have to take to upgrade from 2.0 to 7.0 and what type of issues we going to face while upgrading .please provide me some documentation..
thanks for your time.
Regards
Krish..Hi Krishna,
From start release XI 2.0, however, you first have to migrate to XI 3.0. To migrate from an existing XI 2.0 system, you must install XI 3.0 in parallel (on the same server or on another server) and migrate the content in a second step. This helps to reduce downtime and therefore smoothes the transition to the higher version.
The migration of content from an XI 1.0 installation directly to XI 3.0 or XI 7.0 is not supported.
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/55a1e525-0c01-0010-ad85-e4d5862f2800
vasanth -
Open Interface Rejects - SQL Report
Hi guys, I'm trying to help out some folks in AP with an easier access to view Open Interface rejects. I already knew the relation between AP_INVOICES_INTERFACE and AP_INTERFACE_REJECTIONS was INVOICE_ID AND PARENT_ID (respectively). Now I've seen that some invoices also have a relation between AP_INVOICE_LINES_INTERFACE and AP_INTERFACE_REJECTIONS, same columns related (INVOICE_ID AND PARENT_ID respectively).
What I'm having a problem with, maybe I've just been sitting here too long, but I cannot get it all into one report.
I tried this, but it's giving me way more records than it should:
SELECT AIR.CREATION_DATE
, AIR.REJECT_LOOKUP_CODE
, AII.PO_NUMBER
, AII.GROUP_ID
, AII.VENDOR_NUM
, AII.INVOICE_NUM
, AII.INVOICE_DATE
, AII.INVOICE_AMOUNT
, AII.SOURCE
FROM AP.AP_INTERFACE_REJECTIONS AIR
, AP.AP_INVOICES_INTERFACE AII
, AP.AP_INVOICE_LINES_INTERFACE AILI
WHERE (AII.INVOICE_ID = AIR.PARENT_ID AND AII.ORG_ID = 162)
OR (AILI.INVOICE_ID = AIR.PARENT_ID AND AILI.ORG_ID = 162)
Any thoughts on where I mucked it up or how I could actually go about this? What shows in the actual Open Interface app is a good start, it's just missing some fields like vendor name and reject lookup code.
Thanks for any help!945273 wrote:
Hi guys, I'm trying to help out some folks in AP with an easier access to view Open Interface rejects. I already knew the relation between AP_INVOICES_INTERFACE and AP_INTERFACE_REJECTIONS was INVOICE_ID AND PARENT_ID (respectively). Now I've seen that some invoices also have a relation between AP_INVOICE_LINES_INTERFACE and AP_INTERFACE_REJECTIONS, same columns related (INVOICE_ID AND PARENT_ID respectively).
What I'm having a problem with, maybe I've just been sitting here too long, but I cannot get it all into one report.
I tried this, but it's giving me way more records than it should:
SELECT AIR.CREATION_DATE
, AIR.REJECT_LOOKUP_CODE
, AII.PO_NUMBER
, AII.GROUP_ID
, AII.VENDOR_NUM
, AII.INVOICE_NUM
, AII.INVOICE_DATE
, AII.INVOICE_AMOUNT
, AII.SOURCE
FROM AP.AP_INTERFACE_REJECTIONS AIR
, AP.AP_INVOICES_INTERFACE AII
, AP.AP_INVOICE_LINES_INTERFACE AILI
WHERE (AII.INVOICE_ID = AIR.PARENT_ID AND AII.ORG_ID = 162)
OR (AILI.INVOICE_ID = AIR.PARENT_ID AND AILI.ORG_ID = 162)
Any thoughts on where I mucked it up or how I could actually go about this? What shows in the actual Open Interface app is a good start, it's just missing some fields like vendor name and reject lookup code.
Thanks for any help!I don't know the table strructures or relationships, but based on what you said, I think you want something more like:
SELECT air.creation_date, air.reject_lookup_code, aii.po_number, aii.group_id,
aii.vendor_num, aii.invoice_num, aii.invoice_date, aii.invoice_amount,
aii.source
FROM ap.ap_interface_rejections air, ap.ap_invoices_interface aii,
ap.ap_invoice_lines_interface aili
WHERE ali.invoice_id = alii.invoice_id and
ali.invoice_id = air.parent_id and
aii.org_id = 162You may need/want to add the org_cd predicate to the interfact lines as well, depending if there could be invoices with the same id in multiple orgs.
Assuming you have the relations correct, this should give you a row for every line on every invoice that has a row in the ap_interface_rejections table. It might be worthwhile to look at the ap_interface_rejections table to see if it has an analog for the invoice line number, which could also be used in the join, to get a more specific result set.
John -
Logical interface in solaris 10
Hi there,
I need to configure logical interface in a solaris 10 3/05 server. After reading the Solaris 10 IP services manual, I am not quite sure what to do. All the examples and explanation are about using the new subcommand addif of ifconfig. It was not clear in the documentation if the setting logical interfaces via addif will persist across boot.
Can one still configure logical interface in Solaris 10 in a more traditional way like in Solaris 8? In an Solaris 8 server I will do the following.
Let's assume I want to configure in a solaris 8 server a logical interface named hme0:1 with IP address 192.168.20.28 with netmask 255.255.255.0 for hostname host001
# cat /etc/hostname.hme0:1
host001
^D
# echo "192.168.20.28 host001" >> /etc/inet/hosts
# echo "192.168.20.0 255.255.255.0" >> /etc/inet/netmasks
# reboot -- -r
Can one still do that in solaris 10 3/05 server?Hi there,
I need to configure logical interface in a solaris 10
3/05 server. After reading the Solaris 10 IP services
manual, I am not quite sure what to do. All the
examples and explanation are about using the new
subcommand addif of ifconfig. It was not clear in the
documentation if the setting logical interfaces via
addif will persist across boot.No. No 'ifconfig' command is persistent.
Can one still configure logical interface in Solaris
10 in a more traditional way like in Solaris 8? In an
Solaris 8 server I will do the following.
Let's assume I want to configure in a solaris 8
server a logical interface named hme0:1 with IP
address 192.168.20.28 with netmask 255.255.255.0 for
hostname host001
# cat /etc/hostname.hme0:1
host001
^D
# echo "192.168.20.28 host001" >> /etc/inet/hosts
# echo "192.168.20.0 255.255.255.0" >>
/etc/inet/netmasks
# reboot -- -r
Can one still do that in solaris 10 3/05 server?Absolutely.
You don't need to reboot (you can run ifconfig for this boot and let the files do the work next time) and the -r doesn't do anything with interfaces (expecially virtual interfaces) anyway.
Darren -
Unable to see interface on ASA 5510 Firewall
Hi All,
I am unable to see 4th interface on my firewall i.e fastether0/3 on my firewall ASA 5510.
Below is the output.
ciscoasa# sh int ip br
Interface IP-Address OK? Method Status Protocol
Ethernet0/0 x.x.x.x YES CONFIG up up
Ethernet0/1 x.x.x.x YES CONFIG up up
Ethernet0/2 unassigned YES unset administratively down down
Internal-Control0/0 127.0.1.1 YES unset up up
Internal-Data0/0 unassigned YES unset up up
Management0/0 192.168.1.1 YES CONFIG up up
Please suggest what could be the reason.
Regards
PankajHi Ramraj,
Even i have the base license for my ASA 5510 which is showing all the 4 interfaces in sh ver. I don't think so license would be an issue. There should be some IOS code bug that needs to be upgraded. If this goes for an OS upgrade it should get resolved.
Its not showing up in sh ver . As Karsten said he might be running on old IOS version.
fy-a# sh ver
Cisco Adaptive Security Appliance Software Version 8.4(4)1
Device Manager Version 6.4(5)
Compiled on Thu 14-Jun-12 11:20 by builders
System image file is "disk0:/asa844-1-k8.bin"
Config file at boot was "startup-config"
fy-a up 1 day 1 hour
Hardware: ASA5510, 1024 MB RAM, CPU Pentium 4 Celeron 1600 MHz
Internal ATA Compact Flash, 256MB
BIOS Flash M50FW016 @ 0xfff00000, 2048KB
Encryption hardware device : Cisco ASA-55x0 on-board accelerator (revision 0x0)
Boot microcode : CN1000-MC-BOOT-2.00
SSL/IKE microcode: CNLite-MC-SSLm-PLUS-2.03
IPSec microcode : CNlite-MC-IPSECm-MAIN-2.06
Number of accelerators: 1
0: Ext: Ethernet0/0 : address is 2c54.2d0c.8f1a, irq 9
1: Ext: Ethernet0/1 : address is 2c54.2d0c.8f1b, irq 9
2: Ext: Ethernet0/2 : address is 2c54.2d0c.8f1c, irq 9
3: Ext: Ethernet0/3 : address is 2c54.2d0c.8f1d, irq 9
4: Ext: Management0/0 : address is 2c54.2d0c.8f1e, irq 11
5: Int: Not used : irq 11
6: Int: Not used : irq 5
Licensed features for this platform:
Maximum Physical Interfaces : Unlimited perpetual
Maximum VLANs : 50 perpetual
Inside Hosts : Unlimited perpetual
Failover : Disabled perpetual
VPN-DES : Enabled perpetual
VPN-3DES-AES : Enabled perpetual
Security Contexts : 0 perpetual
GTP/GPRS : Disabled perpetual
AnyConnect Premium Peers : 2 perpetual
AnyConnect Essentials : Disabled perpetual
Other VPN Peers : 250 perpetual
Total VPN Peers : 250 perpetual
Shared License : Disabled perpetual
AnyConnect for Mobile : Disabled perpetual
AnyConnect for Cisco VPN Phone : Disabled perpetual
Advanced Endpoint Assessment : Disabled perpetual
UC Phone Proxy Sessions : 2 perpetual
Total UC Proxy Sessions : 2 perpetual
Botnet Traffic Filter : Disabled perpetual
Intercompany Media Engine : Disabled perpetual
This platform has a Base license.
Serial Number: JMX1AXXXXX
Running Permanent Activation Key: XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX
Configuration register is 0x1
Configuration has not been modified since last system restart.
fy-a#
Ramraj please do correct me if am wrong.
Please do rate if the given information helps.
By
Karthik -
Hello,
I have setup ASA 5505 with 2 ISP, named outside (primary) and backup, the scenario is if outside down, then backup will take over, it works now.
But it is not working when the primary connection cannot reach the gateway with the interface still up.
Is it possible when the primary connection cannot reach the gateway then backup automatically take over?
Thanks before..
My configuration is:
ASA Version 8.2(1)
hostname cisco
domain-name default_domain
enable password ********* encrypted
passwd ********* encrypted
names
interface Vlan1
nameif inside
security-level 100
ip address 192.168.1.254 255.255.255.0
interface Vlan2
nameif outside
security-level 0
ip address 172.10.10.10 255.255.255.0
interface Vlan3
no forward interface Vlan2
nameif backup
security-level 0
ip address 172.20.10.10 255.255.255.0
interface Ethernet0/0
switchport access vlan 1
interface Ethernet0/1
switchport access vlan 2
interface Ethernet0/2
switchport access vlan 3
interface Ethernet0/3
interface Ethernet0/4
interface Ethernet0/5
interface Ethernet0/6
interface Ethernet0/7
ftp mode passive
dns server-group DefaultDNS
domain-name default domain
same-security-traffic permit intra-interface
pager lines 24
logging asdm informational
mtu inside 1500
mtu outside 1500
mtu backup 1500
icmp unreachable rate-limit 1 burst-size 1
no asdm history enable
arp timeout 14400
global (inside) 1 interface
global (outside) 1 interface
global (backup) 1 interface
nat (inside) 1 192.168.1.0 255.255.255.0
access-group inside_out in interface inside
access-group outside_in in interface outside
access-group backup_in in interface backup
route outside 0.0.0.0 0.0.0.0 172.10.10.1 1
route backup 0.0.0.0 0.0.0.0 172.20.10.1 254
timeout xlate 3:00:00
timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00
timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00
timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
timeout tcp-proxy-reassembly 0:01:00
dynamic-access-policy-record DfltAccessPolicy
http server enable
http 192.168.1.0 255.255.255.0 inside
no snmp-server location
no snmp-server contact
snmp-server enable traps snmp authentication linkup linkdown coldstart
crypto ipsec security-association lifetime seconds 28800
crypto ipsec security-association lifetime kilobytes 4608000
telnet 192.168.1.0 255.255.255.0 inside
telnet timeout 5
ssh timeout 5
console timeout 0
dhcpd lease 1048575
dhcpd auto_config outside
dhcpd address 192.168.1.100-192.168.1.200 inside
dhcpd dns 8.8.8.8 8.8.4.4 interface inside
dhcpd enable inside
threat-detection basic-threat
threat-detection statistics access-list
no threat-detection statistics tcp-intercept
webvpn
class-map inspection_default
match default-inspection-traffic
policy-map global_policy
class inspection_default
inspect icmp
service-policy global_policy global
prompt hostname context
Cryptochecksum:24af050f332deab3e38eb578f8081d05
: endHi Amrin,
you can configure SLA monitoring on ASA and that woudl work fine for you:
http://www.cisco.com/en/US/products/hw/vpndevc/ps2030/products_configuration_example09186a00806e880b.shtml
Hope that helps.
Thanks,
Varun -
Run SAP PI Interfaces 24X7. How
How I can run PI Interfaces 24X7 to achieve Business Continuity.
The solution provided as u2013
Install Separate additional PI System u2013 called as Federation PI.
Is this solution really applicable?
Details:
1. Our Current Production Landscape holds only One PI System
2. These interfaces hold Critical, Sensitive Finance, employee Data posting to ECC etc.
3. HA options are available and Planned Outages are communicated with Non-SAP Process teams.
4. No performance issues.
5. PI Scaling is in progress to balance load on PI System.
Requirement: We seek PI Production System up and running 24X7 for all above interfaces with out any interruption.
Below Issues: Makes our PI Production System Shut-down for certain period
1. Planned outages
2. Un-planned outages
3. Upgrades
4. Allowed Down-time
5. SPOF
Solution: Federation of SAP PI
1. A very good solution u2013 so that we can switch to another PI System when first PI system is down for any reason.
2. We need to maintain IR, ID objects of interfaces that we planned for 24X7 in both PI Systems.
3. Communication Channels are active in only One PI system.
4. Manual activation of Communication Channels is required when we plan to switch Second PI Server.
That Implies
5. There is minimum amount of downtime is present.
6. So, 24X7 of runtime is not achievable.
My Only one Question:
Is there any automated procedure for this runtime procedure..!!?
Switching in between PI Systems might be possible.
But, how we can implement activation of CC in Second PI System with out manual interaction?Hi,
Currently we are about to start the POC for my client, and the scenarion is like this
We have a ECC system( which will send the IDOC ) and it will be received by my central PI system.( which is is in UK).
The client is present in multiple locations( UK,AUS,US), they want to install the additional PI boxes in AUS and US and they want to have a federation with central PI system which present in UK.
we have two scenarios.
1) The IDOC will trigger from ECC and then it will go to central PI system and then it has to go to local PI system and then to the third party system.
2) The IDOC will trigger from ECC system and then it has to go to the local PI and then to the central PI box and then to the third party system.
Can you please let me know how can achieve these two scenarios and how to install local PI boxes in federation with the central PI box.
Regards,
Pradeep J -
Good morning!
I am trying to transfer sound from a FantomX7 keyboard synthesizer to garageband through an interface (MAudio) and with a usb cable. I see the image of the sound being recorded but I cannot hear anything - I know that there is a speaker button somewhere that must be muted - but I can't find it . Can anyone tell me what I am doing wrong. thanks, Musicmimi.Good morning!
I am trying to transfer sound from a FantomX7 keyboard synthesizer to garageband through an interface (MAudio) and with a usb cable. I see the image of the sound being recorded but I cannot hear anything - I know that there is a speaker button somewhere that must be muted - but I can't find it . Can anyone tell me what I am doing wrong. thanks, Musicmimi. -
Problems access to a web application (Web Interface or Web report)
Hi,
We found problems with the access to web application. Some users have problems with direct links to the web applications(Web Interface or Web reporting), when they click on the link an error message appears, the message displays the following text:
"Cannot open file Bex?sap-language=ENbsplanguge=ENcmd=idoc_TE.."
Clicking in details the message is "No Access to specified file"
For this users the access to excel reporting is correct, the message appears when they click on the direct web links through the browser or directly in BW system, but if they type the URL they can access. Other users can use the direct web link without problems.
I highly appreciate any help or idea about how to solve this issue.
Thanks in advance.HI,
please ask to your basis that check the language of every single user on su01 tx.
This is the problem i think.
Natalia. -
AP error while submitting "Payable Open interface"
Hello,
I am trying to run the request 'Payables open interface'. I got the output once and the error was because the supplier site was invalid. I created a supplier site saved it and ran the request again. Now, I am getting the following error.
Payables: Version : 11.5.0 - Development
Copyright (c) 1979, 1999, Oracle Corporation. All rights reserved.
APXIIMPT module: Payables Open Interface Import
Current system time is 21-JUN-2009 08:15:01
+-----------------------------
| Starting concurrent program execution...
+-----------------------------
Arguments
p_source='SQLLDR'
p_batch_name='N/A'
p_purge_flag='N'
p_trace_switch='N'
p_debug_switch='N'
p_summary_flag='N'
p_commit_batch_size='1000'
p_user_id='1007990'
p_login_id='2532036'
APPLLCSP Environment Variable set to :
XML_REPORTS_XENVIRONMENT is :
/u02/applmgr/lmtestora/8.0.6/guicommon6/tk60/admin/Tk2Motif_UTF8.rgb
XENVIRONMENT is set to: /u02/applmgr/lmtestora/8.0.6/guicommon6/tk60/admin/Tk2Motif_UTF8.rgb
Current NLS_LANG and NLS_NUMERIC_CHARACTERS Environment Variables are :
American_America.UTF8
Spawned Process 1752
MSG-01104: (Before Report) Modified file
MSG-00000: p_purge_flag :N
MSG-00000: c_nls_yes :Yes
MSG-00000: c_nls_no :No
MSG-00000: p_summary_flag :N
MSG-00000: p_nls_summary :No
MSG-00000: p_nls_purge :No
REP-1419: 'beforereport': PL/SQL program aborted.
Report Builder: Release 6.0.8.27.0 - Production on Sun Jun 21 08:15:02 2009
(c) Copyright 1999 Oracle Corporation. All rights reserved.
Enter Username:
Start of log messages from FND_FILE
End of log messages from FND_FILE
Program exited with status 1
Concurrent Manager encountered an error while running Oracle*Report for your concurrent request 2776668.
Review your concurrent request log and/or report output file for more detailed information.
Executing request completion options...
Finished executing request completion options.
Concurrent request completed
I am trying this for first time. Any help is highly appreciated.
Thanks.Hi,
Please go through the following documents and see if it helps.
Note: 107628.1- Payables Open Interface Invoice Import Troubleshooting Guide (APXIIMPT)
https://metalink2.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=107628.1
Note: 220355.1- APXIIMPT-Payables Open Interface Import Fails Rep-1419:'Beforereport' : Pl/Sql Program Aborted
https://metalink2.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=220355.1
Regards,
Hussein -
Facing issues in Payables Open Interface Import Program
Hi,
We have a requirement of calling Payables Open Interface Import Program from Pl/sql package.
Invoices are getting created.
But the issue is when we query our invoice from invoice workbench and we try to view the record history (help->record history)
We are getting the error as ‘fdxwho failed due to ORA-01403’.
The code is
l_num_req_id :=
fnd_request.submit_request
(application => 'SQLAP',
program => 'APXIIMPT',
argument1 => fnd_global.org_id,
-- org_id
argument2 =>l_chr_source,
-- Invoice source
argument3 => NULL,
argument4 => l_chr_batch_name,
-- Batch Name
argument5 => NULL,
argument6 => NULL,
-- Hold Raeson
argument7 => NULL, -- GL Date
argument8 => 'N',
argument9 => 'N',
argument10 => 'N',
argument11 => 'N',
argument12 => '1000',
argument13 => fnd_global.user_id,
argument14 => fnd_global.login_id
Regards
SureshHi,
Please review notes:
APP-01564 ORA-01403 in FDXWHO In Any Payables Form (Doc ID 1077762.6)
"APP-FND-01564 ORACLE error 1403 in fdxwho" in Record History (Doc ID 879528.1)
Thanks &
Best Regards, -
Error when running Payables Open Interface Import
Hi Experts,
I need help. I'm facing a problem when run Payables open interface import. Before that, I was running same concurrent many times and the concurrent program is completed normal. But, when I try again I'm getting error. what exacly problem is? What should I do?
arguments
p_org_id='84'
p_sources='manual invoice entry'
p_batch_name='N/A,
p_purge_flag='Y'
p_trace_switch='N'
p_debug_switch='Y'
p_summary_flag='Y'
p_commit_batch_size='1000'
p_user_id='1110'
p_login_id='75025'
Current NLS_NUMERIC_CHARACTERS Envirotment Variables are :
American_America.US7ASCII
Enter Password:
REP-0004 : Warning : Unable to open user preference file.
MSG-00001 : (Before Report) After SRWINIT
MSG-00002 : (Before Report) After Get_Company_Name
MSG-00003 : (Before Report) After Get_NLS_Strings
MSG-00001 : (Get Base Curr data 1) Get Base Currency Information
MSG-00004 : (Before Report) After Get_Base_Curr_Data
MSG-00005 : After Get Operating Unit
MSG-00006 : After Get Purge Flag
MSG-00002 : (Before Report Trigger 1) Import Invoices.
MSG-00003 : (Before Report Trigger 3) Exception : When Others.
REP-1419 : 'beforereport' : PL/SQL program aborted.
REP-0069 : Internal Error
REP-57054 : In-process job terminated: Terminated with error:
REP-1419 : MSG-00001 : (Before Report) After SRWINIT
MSG-00002 : (Before Report) After Get_Company_Name
MSG-00003 : (Before Report) After Get_NLS_Strings
MSG-00001 : (Get Base Curr data 1) Get Base Currency Information
MSG-00004 : (Before Report) After Get_Base_Curr_Data
MSG-00005 : After Get Operating Unit
MSG-00006 : After Get Purge Flag
MSG-00002 : (Before Report Trigger 1) Import Invoices.
MSG-00003 : (Before Report Trigger
Best Regards,
Ade HilmanHi Ade;
Please check below note which is mention similar error
Validate AAD fails with ORA-20001: -: XLA-95103: An internal error occurred. [ID 943024.1]
Hope it helps
Regard
Helios -
Issue with Supplier Open Interface Import Program
Hello Folks,
I need help with supplier conversion. I am trying to load suppliers through the supplier open interface program. I see that the record got rejected in AP_SUPPLIERS_INT table with status as REJECTED. However i do not see the record in AP_SUPPLIER_INT_REJECTIONS. Therefore, i am not able to understand the rejection reason. I enabled debug can seeing this log..
assign_party_usage (+)
do_assign_party_usage (+)
effective_start_date = 2011/05/12 effective_end_date = 4712/12/31
duplicates_exist (+)
No date tracking for this usage SUPPLIER. Check duplicate assignment.
l_has_duplicates = Y
duplicates_exist (-)
assign_party_usage (-)
Rejected Vendor_Interface_Id: 15004, No. of Messages from Create_Vendor API: 2, Message From Create_Vendor API:
Enter Password:
REP-0004: Warning: Unable to open user preference file.
MSG-00999: Custom Report
MSG-00001: After SRWINIT
MSG-00002: After Get_Company_Name
MSG-00003: After Get_NLS_Strings
MSG-00004: After Importing Suppliers
MSG-00005: After Get_Header_Information
MSG-00020: After SRWEXIT
As per my understanding from the log, there is some problem with party_usage_assignment. I would really appreciate is someone can help me debug the exact problem. Else i would have to open a SR for this
Thanks so much looking forward for your answers.Pl post details of OS, database and EBS versions.
Pl see if MOS Doc 1060824.1 (R12: Supplier Open Interface APXSUIMP Errors with REP-0004 Output Does Not Indicate Reason for Rejection) is applicable
HTH
Srini
Maybe you are looking for
-
When I plug in my ipod touch the sound works but not the video
I got this app for my kids and I want to play it on my tv the sound works not the video. But when I put the same app on my iphone 4s it works fine on my tv using same cord etc I don't know if there is something I need to do to my ipod to make it w
-
Crystal Report parameter problem
Dear experts, I created a crystal report to display a bill of material. To select the bill of material I created a paremeter ItemCode @SELECT * FROM OITM INNER JOIN OITT ON ItemCode = Code. Unfortunatly SAP shows ALL Items from The Item Master instea
-
No longer able to print via wireless network
I have an HP OfficeJet 6500A Plus E710N and have had it connected to my wifi network and working properly for some time now. Recently, print jobs would queue up and nothing would print b/c it said the printer could not be found on the network. I del
-
FES 022: Error in Control Framework(VF01)
Hi, In T.Code VF01 while saving the billing document number it was fine. After saving while pressing the back, cancel or exit button the system shows the message {{Express document "Update was terminated" received from author "Developer"}}. Kindl
-
Zen Vision:M adding unhighlighted items to Now Play
My brand new Vision:M has just begun adding the item below what I have highlighted to the "Now Playing" list instead of what I wanted. I updated the firmware to . immediately after receiving the player. Anyone else have this problem. After I click on