Interface inventory and training

Hi all
About the interface inventory and training:
I’m working in a SAP solution implementation, just at the preparation phase.
We have already identified the external systems that have to be integrated with our SAP
solution and my client would like to know which is the most suitable training,
as general approach, he should follow to understand how interfaces work and how
they are established between the external system and SAP.
Could anyone give me some advice?
Thank you
Xavier Llurba

Hi Abhinav ,
I have tried that frist but it was not helpful for me . Sh module is only giving the below out put .
Kindly share if you have any feedback .
Rgeards
Vineeth

Similar Messages

Nexus5010 Chassis Interface Inventory and typ of module

Hi Support,
All other cisco Switch models sh inventory commands will show the sl number and type of the module inserted on the switch ports any such commands available on Nexus5010 switch to know the sl number and media type .
OS Version :version 4.0(1a)N1(1)
Regards
Vineeth Mohan

Hi Abhinav ,
I have tried that frist but it was not helpful for me . Sh module is only giving the below out put .
Kindly share if you have any feedback .
Rgeards
Vineeth

Do we have any API / Interface to create Inventory and subinventory...?

Hello,
I am trying to find out API/ Interface to create Inventory and sub inventory. I tried to search lot but I didn't got that.
Could you please help me for that.
Thanks,
Ravi Raj

Hi Ravi Raj,
Please see notes:
Oracle Inventory Management Application Program Interface ( APIs) (Doc ID 729998.1)
A List Of Public API's for Item Master (Doc ID 395493.1)
Also check the etrm.oracle.com website.
Thanks &
Best Regards,
Asif

Names of interface tables and interface programs of oracle modules

Hi all,
i need urgent and accurate information about the names of interface tables and interface programs of the following oracle modules,R12, or either ther are custom made. Any accurate link refering to the desire information would be much appreciated.
Plus i need a clear and simple definition and purpose of interface tables and interface program and by what other names are they known in industry.
Data Object,Oracle Module
Chart of Accounts,Oracle General Ledger
Trial Balance,Oracle General Ledger
Supplier Master,Oracle Payables
Open Supplier Invoices,Oracle Payables
Open Supplier Credit/ Debit Memos,Oracle Payables
Open Supplier Advances,Oracle Payables
Bank Master,Oracle Cash Management
Customer Master,Oracle Receivable
Asset Categories,Oracle Assets
Asset Master,Oracle Assets
Item Master,Oracle Inventory
Item Categories,Oracle Inventory
Sub Inventory and Locators,Oracle Inventory
Item On Hand Balances,Oracle Inventory
Item wise Per unit Cost,Oracle Inventory
Bill of Material,Oracle Discrete Manufacturing
Departments,Oracle Discrete Manufacturing
Operations,Oracle Discrete Manufacturing
Routings,Oracle Discrete Manufacturing
Resources,Oracle Discrete Manufacturing
Overheads,Oracle Discrete Manufacturing
Employee Master,Approval Hierarchy
Approval Hierarchy,Approval Hierarchy
Open Customer Invoices,Oracle Receivables
Open Customer Credit/ Debit Memos,Oracle Receivables
Open Customer Advances,Oracle Receivables
Pending Requisitions,Oracle Purchasing
Pending Purchase Orders,Oracle Purchasing
Open Sales Orders,Oracle Order Management
Price List,Oracle Order Management

Hi;
Its metalink note you need to login metalink wiht valid CSI(customer Support Identifier) number to can se note via using note number.
Please see:
Oracle EBS Based and Interface tables
Oracle EBS Based and Interface tables
Regard
Helios

PMS and Training and Event Management

Hi Gurus,
Our one the of the client implementing PMS and Training and Event Management.
Could anyone suggest me what are the questions need to be asked in initial meeting with the client.
and if anyone has configuration documents on PMS and Training and Event management please forward to me,
my id would be [email protected]
Regards,
Rajesh Soma

The prerequisites of PMS is OM and PA is mandatory,
PMS is just like an interaction between the manager and the employees in an enterprise, based
On his work they are going to put some rating etc.
In the standard system employee called as “Appraise” Manager called as an “Appraiser” and Manager’s Manager called as Higher level manager “Part Appraiser “ can be a self-peer & customer they can save & provide their Comments to the “Appraiser”
First you take the requirement form client side what are the process and how Appraisal system in client then you have to prepare one sheet like Preparation ,Planning,Process
for business functions and other check below :-
HCM, Performance Management (Flexible) 01 - SAP Documentation
HCM, Performance Management (Predefined) 03 - SAP Documentation
check below once :-
Tcodes for PMS Basic Setting
OOHAP_BASIC      Basic Appraisal Template Settings
OOHAP_CATEGORY      Appraisal Category Settings
OOHAP_CAT_GROUP Category Group Settings
OOHAP_SETTINGS_PA PA: Settings
OOHAP_VALUE_TYPE Standard Value Lists
T codes for PMS Process
PHAP_ADMIN     Administrator - Appraisal Document
PHAP_CATALOG     Appraisal Template Catalog
PHAP_CHANGE     Change Appraisal Document
PHAP_CREATE     Create Appraisal
PHAP_PREPARE     Prepare Appraisal Documents
PHAP_SEARCH     Evaluate Appraisal Document
start your work with above things any other post here again ......

Generate Prime Interface Availability and Utilization Report for unified APs

Hi,
I´m trying to generate interface availability and interface utilization report for unified APs on Prime Infrastructure 2.0, but it doesn´t display any information. I have created device health and interface health templates under desing/Monitor configuration/My templates and deployed under Deploy/Monitoring deployment, but it still don´t show any information,
thaks for your help.

Hi Alejandro,
Did you solve this problem? Or is it a bug?
I face the some issue with you, I just run "Report/Report Launch Pad/Deivce/Interface Utilization"
and then I create a report for interface utilization.
But it display nothing when the report run finished.
I ask some guys in this forum, they said maybe it's a PI2.1 bug.
BR
Frank

Urgent need for AP and PO test scripts/scenarios and training user manuals

Hi There,
Can anyone send me test scripts/scenarios and training user manuals for AP and PO
Please send me the docs as soon as possible on [email protected]
I will really appreciate your help.
Regards
Kush

Dear
this topics must be included in the testing scenario
1-Enter Supplier Data Enter information for a given supplier, including supplier sites/addresses
2-Create Invoice Batch: Enter information for Invoice Batch header
3-Create a Standard Invoice: Enter information for a standard invoice in an invoice batch
4-Invoice Distribution: Enter information details of a selected invoice
5-Schedule Payment Create Payment Schedule
6-Create a Credit Memo: Enter information to create a credit memo
7-Create Employee Exp:Enter information for an Employee Expense report
8:Validate an Invoice: Validate an Invoice
9-Account an Invoice: Create Accounting Entries for an Invoice
10-Create a Quick Check: Enter data to create a Quick Payment
11-Select Invoices for Payment:Enter data to create a preliminary list of invoices to pay, review the list, and do some changes.
12-Format and Print a Payment Batch: Perform tasks required to Format a payment batch
13-Confirm a Payment Batch:Perform tasks required to Confirm a payment batch
14-Transfer to General Ledger

CS4 or CS5.5 are interface iphone and andriod apps ?

CS4 or CS5.5 are interface iphone and andriod apps ? How can i do when i make a new web site in DW with support and interface iphone and andriod apps . or we should learn HTML 5 or Wordpress for that ? Thanks !!

Thanks Jeff - ya,sorry, I should've specified. I'm running Win 7 64-bit and I have Production Premium CS4 on the system now. Ideally I would deactivate and uninstall it before I load CS5.5 Production Premium.
My only reasoning is to save on SSD space. Is there any reason to keep CS4 on the machine, other than possible problems with CS5.5?
Thanks again for your reply Jeff.

RME 4.3.1 on new server - 2 issues with Inventory and syslog

Hi,
I recently installed new server 2003 with LMS3.2 and after the problems with DevicePackages i resubmitted all device and the device center tasks that was missing now reappeared.
So I went on and added my two VPN3030 VPN Concentrators.
This device is supported for RME inventory and syslog
I got the config-archive running (!) so thats fine (Runs via HTTPS login)
I have two issues:
1. I can not get inventory to work .
I have communication going, and a packet trace/sniff show I have syslog going into RME and i see SNMP GET and respones to/from device
I see some java error logs in ic_server.log fil
I have tried with two different LMS32-servers
I have increased SNMP timeout etc
I tried deleted the device and rediscover
log are like this:
[ Thu Aug 19 10:12:30 CEST 2010 ],ERROR,[Thread-14],com.cisco.nm.rmeng.inventory.ics.core.CollectionController,761, Collection failed for the device : 3748
com.cisco.nm.xms.xdi.ags.system.CollectionFailed: com.cisco.nm.lib.snmp.lib.SnmpException: SnmpResponseNoSuchName on 10.3.6.2 while performing SnmpWalk(*) at index = 10
    at com.cisco.nm.xms.xdi.pkgs.LibInventory.PortInterfaceAGI_RFC1213_HelperMethods.getIfTableEntriesFromDevice(PortInterfaceAGI_RFC1213_HelperMethods.java:639)
    at com.cisco.nm.xms.xdi.pkgs.SharedInventoryVPN3000.PortInterfaceAGI_RFC1213_Mib.g$eval(PortInterfaceAGI_RFC1213_Mib.java:77)
    at com.cisco.nm.xms.xdi.ags.PortInterfaceAGI.g$eval(PortInterfaceAGI.java:21)
    at com.cisco.nm.xms.xdi.SdiEngine.initAndEvalAGIs(SdiEngine.java:383)
    at com.cisco.nm.xms.xdi.SdiEngine.request(SdiEngine.java:309)
    at com.cisco.nm.xms.xdi.SdiEngine.getDevRepr(SdiEngine.java:302)
    at com.cisco.nm.rmeng.inventory.ics.core.CollectionController.run(CollectionController.java:539)
    at java.lang.Thread.run(Thread.java:595)
[ Thu Aug 19 10:12:30 CEST 2010 ],INFO ,[Thread-14],com.cisco.nm.rmeng.inventory.ics.core.CollectionController,841,Device collection failed for 10.3.6.2
2.:I can not get syslog into the devices syslog reports
This is wierder than issue 1: I have two VPN3030, one actually does syslog fine, but one VPN 3030 does not
I havent done any thing different for the two device ...
one simply works, one doesnt ...
I get no syslog msg in device center for one of the device.
The syslogs ARE infact in the syslog.log
The syslog msg DO show up, but in Unexpected device report ...
The same VPN device does work with my second server so I think this is related to RME database on one specific server.
But i have tried delete device and rediscover etc ...
please help ...

ok - looks like i need TAC again ...
As for the syslog issue - this happens only for one device on one of my servers ...
That is what is strange ... So IP is coorect and ok - (they do get syslogs into DevCenter on one server and on other device)
Thank you for your reply - really nice that you take your time into this forum !

Difference between Interface node and normal node?

What is the main difference between Interface node and normal node?
Cheers
Aisurya.

Hi surya,
Interface node or methods comes into picture whenever you want to use one component as used component. I mean to say
Component usages. If you select node as interface node, it will available in another component so you can use that node or methods.
Normal node means in that component only. Simply we can say for component usages we go for interface nodes.
Cehck This...
http://help.sap.com/saphelp_nw70ehp1/helpdata/EN/79/555e3f71e41e26e10000000a114084/content.htm
Cheers,
Kris.

How to split Inventory and customs during Goods Issue

Hi Friends,
We create an Intercompany PO and do a GR against it. It creates an automatic GI. The Material document posted during GI is Dr. COGS account and Cr. Inventory account. The Inventory account consists of stock value + customs duty paid during GR. Now we want to split this inventory and customs separately while posting the GI.
For Example: Stock value = $100, Customs duty $10. Then total inventory value is $110.
Current postings
Dr. COGS      $110
Cr. Invenotry $110
To be postings
Dr. COGS          $100
Dr. Other Costs $ 10
Cr. Inventory      $100
Cr. Customs       $ 10
Please share any inputs to achieve the required postings.
Regards
Surya

Hi
In our company we have the following cycle if it can gives you any idea:
inventory purchase with custom/ freight cost
Dr. Inventory                         1150
     Cr. GR-IR                         1000
     Cr. Custom for Inventory    100
     Cr. Freight for Inventory       50
While Goods issue to production :
Dr. COGS                1150
     Cr. Inventory        1150
Regards
Mahmoud El Nady

I need information about ESS and Training and Work Experience

I need information about ESS and Training and Work Experience.
Anyone know if there is something inside of the component ESS about Training and Work Experience (infotypes 22 and 23)?
I appreciate information.
Thanks.

Marciano,
check this documentation
http://help.sap.com/saphelp_erp2005/helpdata/en/4d/c19ce6ef2842258283afc35a54172a/frameset.htm
Thanks
Bala Duvvuri

Validation on Inventory and Supplier Data Stream

Hi Experts Team,
My client wants validation on Inventory and Supplier Data Stream. When I am trying to create method it shows only total record and documents in data stream field.
How I can get the above two stream in method.
Can any one suggest me.

Thanks Dan for your speedy reply
I will do validation according to documet type
Thanks & Regards
Madhu

Unwanted interface Alarms and Events in PI2.0

We receive a lot of interface events and alarms from our 3560s access ports. We have not deployed any interface monitoring yet but still hundreds of alarms and events warns us about interfaces going up and down. Anyone who know why Prime is monitoring all interfaces and how to disable that?
Many tanks in advance

Additional lab tests shows that all interfaces of a device indeed is monitored by snmp. When an interface changes from UP to DOWN/DISABLE an event and an alarm is generated. We have not deployed any "Interface health montoring" and still the interfaces are monitored. Not good for access ports.
As a workaround we created a new Interface health monitoring template with the interface availability check disabled and just one other check enabled (interface util) and deployed it on two specific ports on a switch. Did not help. Alarms were still generated when the access ports were disabled.
Any ideas?

I want to mirror an iOS device to my computer for demonstration and training purposes. I cannot use Airserver as my company VPN does not allow the connection. Is there a hardware solution instead?

I want to mirror an iOS device to my computer for demonstration and training purposes. I cannot use Airserver as my company VPN does not allow the connection. Is there a hardware solution instead?

Shoeb, hi.
Thanks for replying and apologies for my tardiness in responding. I have just completed a re-creation of my web page using CSS/HTML rather than XML/XSLT and now I find that when saving in MHT format the watermark/background image is saved, which is nice, but trying to save it as 'webpage complete' under 'save as' in the browser still does not work. (For those who are new to Firefox, MHT files are not supported by the browser, but using the FF extention UnMHT one can open such files and save web documents as MHT files, meaning no accompanying folder is required to properly view the file.)

Interface inventory and training

Similar Messages

Maybe you are looking for