Interface mapping is not visible in receiver determination

Hi,
I could not see interface mapping in my receiver determination in ID.
I can see the message interface and receiver agreement in receiver determination
my scenario is idoc to soap (SAP R3 to webservice)
Thanks
Ruban

hi,
could you plz check as Sheshagiri and Phani have said.
Also wanted to know,are u using the configuration wizard for creating ur business scenario and not finding ur interface mapping?
if so is the case then try creating manually ur reciever determination and add ur interface mapping(if u have already done as said by phani and seshagiri) by inserting it.
let us know how it went.
thanks,
ahmed

Similar Messages

INTERFACE MAPPING wa not Displaying in Receiver Determination (Extended)

Hi friends,
I'm doing Enhanced Receiver determination.. but in this if i select Extended radio button in the receiver determination .. I'm not gettting any search help for selecting my Interface mappings..
what misteqe i did.. for getting those interface mappings in Receiver Determination does we need to do..any special things .
i followed the bellow blog.. but like that i'm not getting... and how many interface mappings do we need to create for this..
/people/venkataramanan.parameswaran/blog/2006/03/17/illustration-of-enhanced-receiver-determination--sp16
plz suggest me..
thanks
BABU

how many interface mappings do we need to create for this..
One
Make sure u have activated ur Interface Mapping. Also recheck the sender interface and the interface u r selecting in Interface Determination step.
Regards,
Prateek

Interface Mappings are not displayed in Receiver Determination

Hi friends,
 I'm doing Enhanced Receiver determination.. but in this if i select Extended radio button in the receiver determination .. I'm not gettting any search help for selecting my Interface mappings..
what misteqe i did.. for getting those interface mappings does we need to do..any special things .
i followed the bellow blog.. but like that i'm not getting... and how many interface mappings do we need to create for this..
/people/venkataramanan.parameswaran/blog/2006/03/17/illustration-of-enhanced-receiver-determination--sp16
plz suggest me..
thanks
BABU

Hi Prabhu..
 Thank you for ur spontenious respnose ..I Mentioned the receiver business services in the user defined function which i creted in the message mappings .. is there any other place also do we nned to mention..
actuvally , i have one source struturce that and Two Receiver strutures..
1) Sendor_DT
 PERSON
 NAME
 AGE
 ADRESS
2) Receiver_DT_1 ( this is for Male person details )
 PERSON
 NAME
 AGE
 ADRESS
3) Receiver_DT_2 (this is for Female Person Details )
 PERSON
 NAME
 AGE
 ADRESS
for this.. i created Three message mappings.. ( one for soource to first recevier )
and next for ( source to second receiver)
and for third for source to RECEIVERS ( MESSAGE TYPE FROM SAP -BASIS component )
in the mapping
i created one user defined function and i map that to split message..
in that user defined function i wrote the bellow coding
int i;
int mr=0;
int ms=0;
for(i=0; i<a.length;i++)
 if( a.substring(0,2).equals("Mr") && mr==0)
 result.addValue("AATRNG_TEST_4_BS_IB1");
 mr=1;
 if( a.substring(0,2).equals("Ms") && ms==0)
 result.addValue("AATRNG_TEST_4_BS_IB2");
 ms=1;
</textarea>
and i created two interface mappings .. and i created three business services.. three communication channels. and two recever aggriments.. and two interface determinations .. and one sendor aggriment and receiver determination with EXTENDED . and i used those interface mappings in recever detrmination ....
but why file was not loaded into receiver side..
thanks
Babu

Receiver agreement not visible in receiver determination( ID)

Hi,
I could not see receiver agreement in receiver determination in ID.
Even i could see my receiver agreement in ID.
Give some inputs to solve this issue.
Thanks & regards,
Ruban

Hi,
I did as u said..even though i could not see receiver agreement in receiver determination.
One more issue is in interface determination, if i select type of interface determination as Enhanced i could able to select name and Name space in inbound interface and interface mapping.
If i select type of interface determination as standard i could not see name , name space for inbound interface and interface mapping.
Thanks
Ruban

Google Map is not visible.

HI all,
I'm currently working on a PCUI Scenario, which requires linking to a Google Map. I've followed a Blog by Gregor Wolf and have done all as been said in it. I'm facing an issue now. I ran my BSP Application and when i gave the Business Partner Number and clicked on search am able to see the position of the BP on the page but the map is not visible.
Can anybody throw light on this.
Helpful answers will be rewarded.
Thanks,
Prashanth.

Hi Gregor,
Thanks for your reply. I'm using Mozilla Fire Fox. Could this be of any problem, anyway let me check if Internet Security Settings could be the problem as you have said. I'm able to view the Dialog which shows the Direction and the standard buttons that are available in to move up and down except the Map.
Kindly help me in Solving this.
Thanks,
Prashanth

GPO Drive mapping - drive not visible but mapped

Did you double check your policy and make sure you selected "Show this drive" for that mapped drive?

HiI've got a weird issue and Internet has yet to give me a solution.So I've created a GPO that maps drives to certain users inOU's.Users that do not yet have a profile ona workstation get the drive mapped as expected. But users that have previously logged on to the workstations do not see the drive.gpupdate /force does not seem to resolve the issue. I ran a gpresult /H result.html and saw that the GPO succeeded in applying the user settings. I checked the drive with "net use" and there I could see that the drive was mapped butjust not visible in Windows. The drive letter I'm using is not used by another device. The reconnect checkbox is ticked in the Drive Maps properties.When I type the drive letter in the addressbar in explorer ( N:\) it works flawlessly so it's not a permission issue.So to summarize: drive is accessible and mapped...
This topic first appeared in the Spiceworks Community

Indbound Interface not visible in Receiver business service

Hello Experts-
II have created a business service.
After creating the business service, when try to enter receiver inbound interfaces.
The message interface which I declared in IR is not visible .
I am not able to select it as its not visible.
When I manually input the name system display object doesnt exist. But, In IR I can see its there. Do I have to do any kind of import?
I am doing a Flat file to RFC scenario.
Thanks,
raj.

Yes. Below is little more detail descripition on what i did.
In IR design , this is what I have
MI_filetype (outbound asynchronous) and I have assigned its message type (mt_filetype) to it.
In message mapping I have mapped
mt_filetype to RFC message (ZFILEtype)
mapped the source interface MI_filetype to Target interface ZFILETYPE.
I have sucessfully tested interface mapping. .
Activated the change list.
In IR configuration,
I have created a scenario and then Busniess service for sender. and create dit communication channel.
In next step business service for receiver, I am assuming the receiver inbound interface would be MI_filetype?
Is that not right?
Thanks,
Raj

Message Interface not found during Receiver determination

Hi Folks,
While doing Receiver determination i found this error
Problem Loading Schema Description: Message interface does not exist in any software components installed on this business system
i checked it in SLD also for Product assigned to Particular Business System. Even i tried with creating a new one and assigning the product and software component to it.
When i imported the Business system from SLD, i m not able to see any inbound and outbound interface for particular business system.
But it is working for another scenario where inbound interfaces are used.
plz help me out
Sachin

Sachin,
>DEV and QA is having diff. SLD so i created the SWC and products in SLD again.
You should export the SWCV from your Old SLD and import in into your new SLD.
and then import the same in Integration Respository.
When you try to export SWCV from SLD, you will get a .CIM file which you need to save in your local desktop and then import this in the new environment.
More in this article,
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/9e76e511-0d01-0010-5c9d-9f768d644808
Regards
Bhavesh

Interface Mapping does not exist in runtime cache

Hi,
I have a scenario of RFC to SOAP, when I do the test I get the error message "Interface mapping http://sapxi.xxx.co.za/XXXXXX/ InterfaceMapping_Name does not exist in runtime cache"
Regards
Scharlotte

Hi...
Try to re-create the Interface mapping.
And also test your Configuration with test tool where you can find the error on which step.
if the error found in interface mapping.. do re-create the interface determination step and receiver agreement.
Provide the payload which is taken from sxmb_moni --> Inbound msg --> Payload
u can follow this blog for how to test configuration part:
Test Your XI Configuration With The New Test Tool
Regards,
Parvathy

Error : Interface mapping does not exist in runtime Cache

Hello Guys
I have a simple SOAP-To-RFC connection which was working fine until recently. I have not made any changes
but the data is not getting transfered from one point to another.
I checked SXMB_MONI and saw the following error:
Interface mapping http://cincom.com/config AddConfig does not exist in runtime cache
Then I went and checked SXI_CACHE and it says 'Cache contents are upto date' with a green light.
Just to be on the safer side, I shutdown and restarted XI server selecting All tasks.
But still has the same problem.
Can some one help me with this? I would really appreciate it.
Thanks
Ram

Hi,
We too faced the same problem.
Do the following
1) Delete the Interface mapping and re-create it
2) First test your Config with test tool
/people/paul.medaille/blog/2005/06/24/test-your-xi-configuration-with-the-new-test-tool
I think here you will find the error on Interface mapp or Receiver agreement
Then delete the interface det and receiver agreement also and re-create those.
Make sure that u have provided the sample payload which is taken from MONI--Inbound msg--Payload
Then finally u will get the success
Regards
Seshagiri

Having a try with HCI, newly mapped data not visible in Payload?

Hi experts,
I'm playing around with HCI on our Test tenant as we would like to map a few more fields. I'm trying to map the Customer Group field which is at the Customer level in Sales Data in C4C, with our Price List Type field also in Sales Data in our SAP CRM.
The idea behind that mapping is just that this is the only field we are using to determine the Price List used for a Customer in a given Sales Org and we would like to get this data in Customer Group in C4C as it's also a field used in Price List determination.
My test is fairly simple:
Made sure my test data was in the Code List Mapping in my C4C Project Implementation
Used the web interface to map my field with the Sales Data-Customer Group field in C4C (see attached)
Pushed a change from on premise to C4C (IDOC and Payload attached)
Unfortunately the field doesn't appear in the Payload even if there is something in the IDOC with the mapping configured.
I'm sure I am missing something now, any help?
Thanks,
JB.

Hello,
Bumping my request and adding some other clarifications.
Instead of trying to make this Customer Group field work, I tried integrating another simple extension field (text type) to avoid any mapping issues if there were any.
Unfortunately even after redeploying the iflow, seeing that the mapping is OK in the web interface and that the data is properly generated in the outgoing IDOC, the incoming XML is still not showing this new field/data.
The field was extended properly to the scenario and the WSDL has been updated properly in HCI to reflect the new field (I can see it in the mapping). Everything was deployed/restarted as far as I can tell.
Am I missing something or should I create an incident?
Thank you,
JB.

Multi Mapping with out BPM and Receiver Determination Condition

Hi Masters,
My Requirement Was:
Proxy will send the data to XI system, Based Customer group number[1000,2000,3000,4000], I need to split the message into 4 messages, and sent to 4 Different location, based on Customer Group condition.
For message split, I fallowed below weblog.
/people/jin.shin/blog/2006/02/07/multi-mapping-without-bpm--yes-it146s-possible
Problem is file split correctly, but data goes to all customer groups..
EX
If they send the customer group 1000, I need to send the customer group 1000 file to BS1[Business Server1],
If they send the customer group 2000, I need to send the customer group 2000 file to BS2[Business Server1],
Please guide me,
Thanks,
ANU-

Hi,
Develope it like follow.
Source Structure- Same for everything.
Create 4 different structures for all targets, create 4 different msg types, 4 inbound message interface ( i think you are creating single Message type now, that is the mistake)
In message maaping, add 4 target message types in same MM.. i hope i am clear.. ( same like in blog /people/jin.shin/blog/2006/02/07/multi-mapping-without-bpm--yes-it146s-possible he has created 2 message types USER_1 and Employee)
keep occurence of all of them 0 to unbunded (not necessary)
Now create mapping for each message type (same like USER_1 and Employee, imagine them like different message types virtually).
Map message type with the source field and mention the condition which you want test using graphical functions. i will say if x e equla to 1 creatif --> target.
I hope i m clear till now...
thanks.

AS2 adapter not visible in Receiver Communication Channel (Adapter Type)

Hi,
We wish to connect to our customer using AS2 adapter as the receiver communication channel.
We are unable to find the "AS2 adapter type in the in "adapter type" field. (Choose Adapter Metadata).
Our XI version is as following (NW04S_11_REL Service Pack 11).
Version
Service pack:
11
Release:
NW04S_11_REL
Is there add-on to be installed on XI or is there any activation required?
Thanks in Advance,
Rehan

SAP_BASIS
Release 700
Level 0011
Highest Support Package: SAPKB70011

Pics are not visible in received mail

This has been happening a lot. Someone will send me an email with a picture or multiple pictures in it, and instead of the pictures I get little blue boxes with question marks in them. When I right click on the box, there is a single option "download image" but it doesn't seem to do anything. Nothing shows up anywhere.

I had lots of gremlins with mail dissapearing after installing tiger but have resolved them. Now the slideshow feature has gone, it was there when I first opened mail under tiger but it has since vanished. The earlier reference to button on top right corner is a puzzle, as, when I click on mine all that happens is the munu bar shrinks. The photos are shown on my emails but the slideshow has just vanished, just as I was finding this useful. Any ideas

Message not visible but received

I would like to send a print screen to show what happen but i don't find how to join the picture in tis message.

Error is as follow
Horodatage : 08/05/2014 19:07:42
Avertissement : Couleur attendue, mais « top » trouvé. Erreur d'analyse de la valeur pour « background-image ». Déclaration abandonnée.
Fichier Source : https://mail.google.com/mail/u/0/
Ligne : 1, Colonne : 472125

Interface mapping is not visible in receiver determination

Similar Messages

Maybe you are looking for