Interface mapping - Not specified

I am able to create the interface determination. But I am not able to associate my Interface mapping to the Inbound interface. After I selected a Inbound interface in the Interface determination, I clicked on the mapping option, but 'No objects found!' for interface mapping. But I saw it in 'Integration Builder: Design'.

Hi,
Make sure that the source and the target interfaces in configuration are the same as in Interface Mapping......this problemis not related only to Target interface....take into consideration both the interfaces......
Regards,
Abhishek.

Similar Messages

Interface Mapping Not Found in Integration Directory

Hey guys!
I'am getting this error in the test configuration part of the integration directory:
"Interface Mapping: <Not Found> com.sap.aii.utilxi.misc.api.BaseRuntimeException thrown during application mapping"
I don't see why I should be getting this error since I have properly defined a message and interface mapping for the receiving interface.
BTW, I get this error when I use XSLT mapping. If I point my interface mapping to a normal message mapping, I get no error. Is there anything I am missing?
Regards,
Glenn

The weird thing is that when I test the the configuration in the Integration Directory, it is still looking for my old message mapping (the one i created using xi editor) even though I already replaced the referenced message mapping in the interface mapping to the XSL one.
Yes, I tested the interface mapping with the same data using the XSL mapping and there's no problem.
When I send the message though, I get an error saying "NO_RECEIVER_CASE_ASYNC" I really don't see why it should not recognize the receiver. I tried refreshing the cache but it still looks for my old mapping program...
:P

Error Interface Mapping Not found..

Hi Friends,
I am simply using file to ABAP proxy scenario.
I am getting error as : This I am getting while test my configuration at Scenario level Tools - > Test Configuration..
Interface Mapping :
Runtime error
com.sap.aii.utilxi.misc.api.BaseRuntimeException thrown during application mapping com/sap/xi/tf/_MM_Source_Target_Proxy_: Parsing an empty source. Root element expected!
Plz help.
Regard
Deepak Sodhi

Hi Rajesh,
I am keeping the file as it is from Meassage mapping SRC File..
Message Mapping is giving me no error..
<?xml version="1.0" encoding="UTF-8"?>
<ns0:MT_Source_Proxy xmlns:ns0="https://tcsfenest/test">
   <EmpId>315143</EmpId>
   <EmpName>Deepak Sodhi</EmpName>
   <EmpOffc>Gurgaon</EmpOffc>
</ns0:MT_Source_Proxy>
Only at the time of Testing configuration Environment -> Test Scenario.
Its giving me error Interface mapping not found.. My strucuture is flat.
DT - Complex type
Empid element string
Empname element string
Empoffc element string
Please help to resolove this issue.
Regards
depak

Interface Mapping Not found?

Hi expert,
iam doing file to file senario using file content convertion,i have done IR,ID.while runing the senario its not execuing.To test the senario in ID i done it in Test Configuration in that its giving Interface Mapping not found but i have check all i done it right were the problem is there i cant understand can any one plz help me.
Regards,
Phani

Hi Phani,
It won't be solved by restarting the server.
Please go to the IR and check the interfaces you are using are pointing towards namespaces in which you have made the message mapping.
Most of the times if you are copying the things from different namespaces these errors come.
Thanks
Amitanshu
Reward Points if the answer is useful for you
Message was edited by:
Amitanshu Deep

XSLT Interface Mapping Not Found For HTTP Response

NW 04's SR 10, RFC => XSL => HTML
The scenario transforms data from R/3 into XML using XSLT and sends it to a 3rd party vendor wrapped inside a field of an HTML form via the HTTPS adapter. XSL was used for this instead of standard MessageMapping to meet the customer's needed for the XML data to be delivered in an untransformed structure, including their DTD declaration, so they could parse it upon receipt.
The outbound process is successful and the data is posted to the customer's database. Upon receipt, they send back a simple HTML form containing the success/failure in an H1 tag and our submitted XML data in the Body tag.
The problem is that due to the use of an XSL as the outbound mapping XI does not have a cached message structure to which it can map the response and thus throws the <b>Interface mapping .... does not exist in runtime cache</b> message. I do not feel this is a cache problem since I've cleared the XI cache, CPACache and anything else I've read as well as verified that the outbound mapping exists in the XI Cache list. I honestly feel I'm just missing a necessary piece to tell XI how to map the HTML response message back to the RFC Sender.
I have attempted numerous ideas, one of which included the use of the same RFC structure as the inbound and outbound MessageType so that a Response mapping could be specified but a NullPointerException was thrown in the mapping step since the response was of a completely different structure.
My question is how to handle the return data when using XSLT to create the outbound structure dynamically to prevent runtime errors in XI?
Thanks in advance,
Lane

Thanks for the quick response Bhavesh.
I figured out the response mapping option after I posted the question and also thought of using XSL to handle the response but I ran into a few other issues relating to my limited experience with XSLT that is preventing me from completely solving this.
The response is a plain HTML file structured as:
< html >
< body >
    < h1 >Success/FailureMessage< /h1 >
    < br >
    Record Created
    < br >< br > XML Data: <?xml version="1.0" encoding="utf-8"?><!DOCTYPE ....
< /body >
< /html >
where the actual XML data posted to the client system is embedded in the HTML body. Therefore the response is not well-formed XML and fails on parsing but also contains another XML message within the HTML structure that throws off parsing as well. Do you know XSLT well enough to get around this?
What about writing a Java function that just reads the incoming information but in doing this how do I go about mapping back to the RFC? Can I get ahold of the XI API somewhere to instantiate the RFC Objects dynamically?
Thanks again,
Lane

Interface Mapping not found error

I'm getting "Interface Mapping <name> (SWCV=<id>) not found" error during runtime. I did not do anything to the specified interface mapping. If I go into the repository and put into modify mode, add space to description, save, activate, it all works fine. Any idea why my interface mappings are getting "lost" in the runtime cache... any way to do a bulk reload of repository objects into the runtime cache?

Hi Tadd,
It may help to eliminate the possible erros:
1) In the Runtime Workbench, simulate the message in the Component Monitoring / Adapter Engine. If this does not work:
2) Try to restart the JVM. I have seen sometimes that the mapping functions stored as Java files do not get refreshed.
Cheers,
Bhanu

Interface Mapping not supported in the JPA specification?

Are there any plans to add Interface support in the JPA specification? It is not supported by JPA annotations, which seems quite disruptive to proper object oriented design. However, individual implementations of JPA seem to support this:
http://docs.jboss.org/hibernate/stable/core/reference/en/html_single/#inheritance-tableperclass
http://wiki.eclipse.org/Using_EclipseLink_JPA_Extensions_%28ELUG%29#How_to_Use_the_.40VariableOneToOne_Annotation
There is visible interest in getting this implemented at an Annotation level for Hibernate also but the developers for Hibernate point out that this isn't even in the JPA specifications.
http://opensource.atlassian.com/projects/hibernate/browse/ANN-9
https://forum.hibernate.org/viewtopic.php?f=9&t=941363&sid=4abdbc72cbf04380f4a8e2cadd7dfada&start=15
Is this being talked about/in the works for JPA? Why not include @VariableOneToOne in the spec? It would seem to be quite an essential feature for wide adoption.

Hi,
You can only choose the Interface mapping for the Enhanced recevier determination in the extended tab of Receiver determination. & I dont see the Interface mapping in the select list.
Where do I have to check for the proper outbound message???
Regards

Interface Mapping not listing in the Extended Reciever Determination

Hi,
The Interface Mapping is not shown in my Extended receiver determination. I have created and activated the IM & MM using the MT - Receivers within the SAP Basis.
Regards
Unni

Hi,
You can only choose the Interface mapping for the Enhanced recevier determination in the extended tab of Receiver determination. & I dont see the Interface mapping in the select list.
Where do I have to check for the proper outbound message???
Regards

BPM Error in Transformation Step: Interface Mapping not found

Hi,
Can you help me on this? I have a tranformation step in my BPM that combines a request and response message of a previous Send step to create a Source message for the next Send step. However, on my transformation step, I got the mapping error in workflow log: Interface mapping http://gl.euhreka.com/learning/skillsoft/catalogSy.YGLXI_OM_MergeRequestAndHandleResponseAB_To_PollFo (SWCV=DF8549309ECE11DFB58DF3570A341E0F) not found
Do you have any idea about this error? My mapping program is working fine. I also checked if the container elements assigned to the transformation steps are correct.
Can you suggest of other way on how can I achieve on merging 2 messages (request and response) and set it to the Request for another send step?
Thanks,
Jenny

Hello,
I already solved the problem. The namespace and Operation mapping name is too long that's why it cannot be located at runtime.
After the rename, another error appeared.
"Incorrect XML format after mapping: Root-Tag expected instead of Messages"
There are no useful information on the trace:
<?xml version="1.0" encoding="utf-8" ?>
- <MappingTrace>
<Trace level="1" type="T">Mapping http://test YGLXI_OM_Merge , Software Component Version DF8549309ECE11DFB58DF3570A341E0F</Trace>
<Trace level="1" type="T">Mapping Step 1 , Type XSLT , Program PollForReport_Merge</Trace>
<Trace level="2" type="T">Call XSLT processor with stylsheet PollForReport_Merge.xsl.</Trace>
<Trace level="2" type="T">Returned form XSLT processor.</Trace>
</MappingTrace>
Here is myXSLT program:
<?xml version='1.0' encoding='utf-8' ?>
<xsl:stylesheet version="2.0" xmlns:xsl="http://www.w3.org/1999/XSL/Transform" >
     <xsl:template match="/">
          <YGLXI_MT_PollForReportRequest>
               <customerID>
                    <xsl:value-of select="//customerID"/>
               </customerID>
               <customerPassword>
                    <xsl:value-of select="//customerPassword"/>
               </customerPassword>
               <reportIDHandle>
                    <xsl:value-of select="//reportHandle"/>
               </reportIDHandle>
          </YGLXI_MT_PollForReportRequest>
     </xsl:template>
Here is my source message:
<?xml version="1.0" encoding="UTF-8"?>
<ns0:Messages xmlns:ns0="http://sap.com/xi/XI/SplitAndMerge">
   <ns0:Message1>
      <ns1:YGLXI_MT_InitiateFullCourseListingRequest xmlns:ns1="http://gl.euhreka.com/learning/skillsoft/catalogSynchronization">
         <customerID>ZZZ</customerID>
         <customerPassword>XXX</customerPassword>
         <reportFormat>VVV</reportFormat>
         <mode>VCC</mode>
         <userName>CC</userName>
      </ns1:YGLXI_MT_InitiateFullCourseListingRequest>
   </ns0:Message1>
   <ns0:Message2>
      <ns1:YGLXI_MT_InitiateFullCourseListingResponse xmlns:ns1="http://gl.euhreka.com/learning/skillsoft/catalogSynchronization">
         <reportHandle>SADA</reportHandle>
      </ns1:YGLXI_MT_InitiateFullCourseListingResponse>
   </ns0:Message2>
</ns0:Messages>
I tested my program in Operation mapping and it is working. How come it is not in BPM?
Thanks,
Jenny

Interface mapping not shown in directory search help

Hi,
I creatd a interface mapping in repository with message mapping. but when i configure the directory for receiver determination .. the interface mapping is not shown when i click the search help.
pls any one help me .
thankx,
shree

Hi Shree,
Three checkpoints:
1. Make sure you have entered the correct outbound and inbound interfaces.
2. Make sure you have activated your interfaces and mappings.
3. Make sure the cache is up-to-date (you can refresh cache by transaction sxi_cache).
Hope this helps.
Regards,
Hart

Interface Mapping Not found in ID

hi all,
I am not getting the Interface mapping in interface detemination.
I have cleared all the cache.
My inbound mapping and interface mapping in IR are corret and activated.
Please suggest me possible cause for the problem.I have to give a demo by today EOD.
thanks and best Regards,
Nidhi

Hi,
May I Kidnly request you to explain your scenario in more details.
as per the information till you will not activate the Inteface Mapping, it will not be available in ID.
Thus you need to temparory create the request side mapping with request side Message structure and don't mapp all the fields =, just mapp the header nodes. and use it in Interface Mapping.
I think you don't wish to pass any data to receiver just to triger the event on receiver with call and the receiver will give back teh response to you.
Thanks
Swarup

Interface map not exist in cache

hi iam configuring proxy to bapi and getting following error
Interface mapping urn:xiworkshop:group00:webapp
PO_out__ZBAPI_PO_CREATE does not exist in runtime cache
i refreshed the cache and done reactivation of the objects
still same story. plz help me
thanks and regards

can you please explain how you refreshed the cache ?

ID-Error: Interface Mapping Not Found

Hi,
While doing the test configuration in Integration Directory, i'm getting the below errors, after pasting in the payload area & after executing step by step:
Sender Agreement
Also, once when i'm adding message interface to interface mapping in Integration Repository, i'm getting the error as:
"Message Interface does not exits on any software components"
afterwards this error not came once again.
Plsssssssss help me to resolve the same.
Regards,
Balaji

Hi Balaji,
try to do a cache refresh,using tools>>clear SLD cache.
also see if message mapping and interface mapping have been created properly and activated.
Check the following:
--> The o/b and i/b interfaces in the mapping program are same as used to create the interface det. object.
--> THe Interface mapping shld be active...
Refer to the topics at the below link
http://help.sap.com/saphelp_nw04/helpdata/en/21/6faf35c2d74295a3cb97f6f3ccf43c/content.htm
http://help.sap.com/saphelp_nw04/helpdata/en/4f/ef761a5ecfb1418b79896e10fe4c57/content.htm
Reward points if this helps
Regards
Vani.

Interface mapping not visible in interface determination

Hi,
when i create Interface determination in ID i could see Message interface and i could not my Interface mapping in that.
It is saying no objects found.
when i select enhanced instead of standard i could see my Interface mapping
plz give some idea reg. this
Thanks

Hi,
Check if there is any Interface mapping available between the Outbound Message Interface name and Inbound Message Interface name which you are using in your Interface Determination. Check carefully.
Thanks
aMit

SXMB_MONI: Interface-Mapping not in runtime-cache

Hi everybody,
I got the error in SXMB_MONI:
Interface-Mapping XYZ not in runtime-cache.
We did a full cache refresh in sxi_cache.
In integration directory I got the cache-notification:
>>> if_http_client receive http_communication_failure <<<
Does anybody know, what I have to do?
Thanks regards
Mario

Hi
Pls check, this may help you
Cache Refresh Errors - New Phenomena
Ram

Interface mapping - Not specified

Similar Messages

Maybe you are looking for