INTERFACE MAPPING wa not Displaying in Receiver Determination (Extended)

Hi friends,
I'm doing Enhanced Receiver determination.. but in this if i select Extended radio button in the receiver determination .. I'm not gettting any search help for selecting my Interface mappings..
what misteqe i did.. for getting those interface mappings in Receiver Determination does we need to do..any special things .
i followed the bellow blog.. but like that i'm not getting... and how many interface mappings do we need to create for this..
/people/venkataramanan.parameswaran/blog/2006/03/17/illustration-of-enhanced-receiver-determination--sp16
plz suggest me..
thanks
BABU

how many interface mappings do we need to create for this..
One
Make sure u have activated ur Interface Mapping. Also recheck the sender interface and the interface u r selecting in Interface Determination step.
Regards,
Prateek

Similar Messages

Interface Mappings are not displayed in Receiver Determination

Hi friends,
 I'm doing Enhanced Receiver determination.. but in this if i select Extended radio button in the receiver determination .. I'm not gettting any search help for selecting my Interface mappings..
what misteqe i did.. for getting those interface mappings does we need to do..any special things .
i followed the bellow blog.. but like that i'm not getting... and how many interface mappings do we need to create for this..
/people/venkataramanan.parameswaran/blog/2006/03/17/illustration-of-enhanced-receiver-determination--sp16
plz suggest me..
thanks
BABU

Hi Prabhu..
 Thank you for ur spontenious respnose ..I Mentioned the receiver business services in the user defined function which i creted in the message mappings .. is there any other place also do we nned to mention..
actuvally , i have one source struturce that and Two Receiver strutures..
1) Sendor_DT
 PERSON
 NAME
 AGE
 ADRESS
2) Receiver_DT_1 ( this is for Male person details )
 PERSON
 NAME
 AGE
 ADRESS
3) Receiver_DT_2 (this is for Female Person Details )
 PERSON
 NAME
 AGE
 ADRESS
for this.. i created Three message mappings.. ( one for soource to first recevier )
and next for ( source to second receiver)
and for third for source to RECEIVERS ( MESSAGE TYPE FROM SAP -BASIS component )
in the mapping
i created one user defined function and i map that to split message..
in that user defined function i wrote the bellow coding
int i;
int mr=0;
int ms=0;
for(i=0; i<a.length;i++)
 if( a.substring(0,2).equals("Mr") && mr==0)
 result.addValue("AATRNG_TEST_4_BS_IB1");
 mr=1;
 if( a.substring(0,2).equals("Ms") && ms==0)
 result.addValue("AATRNG_TEST_4_BS_IB2");
 ms=1;
</textarea>
and i created two interface mappings .. and i created three business services.. three communication channels. and two recever aggriments.. and two interface determinations .. and one sendor aggriment and receiver determination with EXTENDED . and i used those interface mappings in recever detrmination ....
but why file was not loaded into receiver side..
thanks
Babu

Interface mapping is not visible in receiver determination

Hi,
I could not see interface mapping in my receiver determination in ID.
I can see the message interface and receiver agreement in receiver determination
my scenario is idoc to soap (SAP R3 to webservice)
Thanks
Ruban

hi,
could you plz check as Sheshagiri and Phani have said.
Also wanted to know,are u using the configuration wizard for creating ur business scenario and not finding ur interface mapping?
if so is the case then try creating manually ur reciever determination and add ur interface mapping(if u have already done as said by phani and seshagiri) by inserting it.
let us know how it went.
thanks,
ahmed

Map app not displaying correctly

I recently downloaded the most recent os 8.1.3 on my iphone 4s. Now the map app (apple default) doesn't display correctly. I only see the grid and my location dot in standard view, no street names or lines, no details whatsoever. This is affecting any app that uses the apple default (Zillow, trulia, etc). My husband has the exact same iphone 4s and he has the most current os and his map app works fine. I'm thinking that I should try to reload the most current os but since it is the most current, there doesn't seem to be an obvious way since all message are "you have the most current version". I could also try to download just the most recent version of the map app but since it is a default, I don't know how. Any suggestions?

Hi meedjmom,
If you are having issues with your Maps application not displaying correctly, you may want to try some things to troubleshoot.
First, quit all running applications and test again -
Force an app to close in iOS
Next, I would try restarting and if needed resetting the iPhone -
Restart or reset your iPhone, iPad, or iPod touch
If the issue is still present, you may want to restore the iPhone as a new device -
How to erase your iOS device and then set it up as a new device or restore it from backups
Thanks for using Apple Support Communities.
Best,
Brett L

Message Interface not found during Receiver determination

Hi Folks,
While doing Receiver determination i found this error
Problem Loading Schema Description: Message interface does not exist in any software components installed on this business system
i checked it in SLD also for Product assigned to Particular Business System. Even i tried with creating a new one and assigning the product and software component to it.
When i imported the Business system from SLD, i m not able to see any inbound and outbound interface for particular business system.
But it is working for another scenario where inbound interfaces are used.
plz help me out
Sachin

Sachin,
>DEV and QA is having diff. SLD so i created the SWC and products in SLD again.
You should export the SWCV from your Old SLD and import in into your new SLD.
and then import the same in Integration Respository.
When you try to export SWCV from SLD, you will get a .CIM file which you need to save in your local desktop and then import this in the new environment.
More in this article,
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/9e76e511-0d01-0010-5c9d-9f768d644808
Regards
Bhavesh

Receiver agreement not visible in receiver determination( ID)

Hi,
I could not see receiver agreement in receiver determination in ID.
Even i could see my receiver agreement in ID.
Give some inputs to solve this issue.
Thanks & regards,
Ruban

Hi,
I did as u said..even though i could not see receiver agreement in receiver determination.
One more issue is in interface determination, if i select type of interface determination as Enhanced i could able to select name and Name space in inbound interface and interface mapping.
If i select type of interface determination as standard i could not see name , name space for inbound interface and interface mapping.
Thanks
Ruban

Interface Mapping does not exist in runtime cache

Hi,
I have a scenario of RFC to SOAP, when I do the test I get the error message "Interface mapping http://sapxi.xxx.co.za/XXXXXX/ InterfaceMapping_Name does not exist in runtime cache"
Regards
Scharlotte

Hi...
Try to re-create the Interface mapping.
And also test your Configuration with test tool where you can find the error on which step.
if the error found in interface mapping.. do re-create the interface determination step and receiver agreement.
Provide the payload which is taken from sxmb_moni --> Inbound msg --> Payload
u can follow this blog for how to test configuration part:
Test Your XI Configuration With The New Test Tool
Regards,
Parvathy

Error : Interface mapping does not exist in runtime Cache

Hello Guys
I have a simple SOAP-To-RFC connection which was working fine until recently. I have not made any changes
but the data is not getting transfered from one point to another.
I checked SXMB_MONI and saw the following error:
Interface mapping http://cincom.com/config AddConfig does not exist in runtime cache
Then I went and checked SXI_CACHE and it says 'Cache contents are upto date' with a green light.
Just to be on the safer side, I shutdown and restarted XI server selecting All tasks.
But still has the same problem.
Can some one help me with this? I would really appreciate it.
Thanks
Ram

Hi,
We too faced the same problem.
Do the following
1) Delete the Interface mapping and re-create it
2) First test your Config with test tool
/people/paul.medaille/blog/2005/06/24/test-your-xi-configuration-with-the-new-test-tool
I think here you will find the error on Interface mapp or Receiver agreement
Then delete the interface det and receiver agreement also and re-create those.
Make sure that u have provided the sample payload which is taken from MONI--Inbound msg--Payload
Then finally u will get the success
Regards
Seshagiri

Pictures disappear, maps are not displayed

Some malfunction in displays - showing up in actually 2 errors:
1. On certain webpages, the picture is shortly displayed but then replaced by the loading symbol, reload will repeat this sequence.
2. Also, maps are typically not displayed but remain empty right from beginning (no loading symbol).
I guess it has something to do with settings, add-ons, or plug-ins, but could not get proper function by disabling them. It is not the website itself, since the pictures show up fine with the same Firefox version on another PC.
Thanks for help.

I have finally solved the problem. It had to do with the user profile - after reset everything is working fine. Good luck for those who also have this problem!

Map outline not displaying!

My maps on my iPhone 4S with IOS6 is not displaying. The maps won't show outlines in map app nor in the photo map also, any advice would be great.

reset is home button plus the power button at the same time
the restore is hooking it up to itunes and putting it back to factory setting and also putting a new ios on it.
and those are the steps out there. Just because some other people said it wouldnt work doesnt mean it wont work for you

Raster map is not displaying on map

Hi Dear,
i have a problem displaying raster map. raster maps are successfully loaded and i created raster theme and able to display raster maps on map builder. then i created a map which contains 2 geometry themes and 1 raster theme i am able to see all these themes together in mapbuilder displaying fine. but when i am trying to display on map its displaying only geometry themes
not displaying rasters on map
here is my raster theme xml code
<?xml version="1.0" standalone="yes"?>
<styling_rules theme_type="georaster">
</styling_rules>
do i need to add any more additions to my raster theme to display on my map ?
please some one let me know
Thanks
Kabeer

Hi Joao
i copied those jar files to my mapviewer WEB-INF\lib directory and its working fine. its displaying my vector and raster data on my map.
but there was small thing i what i recognized that before copying these files i had a georaster theme map and it does not display even if i run Purge cached metadata from mapviewer.
i created again another georaster theme map and created cache then it worked with me.
Thanks once again
Regards
Kabeer

Pictures not displaying in received email.

I receive frequent emails from SweetJack.com. There are descriptions of their offers over gray blank boxes. I opened the same mail from Outlook.com's website and they display correctly. I am stumped.
I have a screenshot of the problem but don't know how to attach it to this message.
Thanks,
Bob

You can check Tools -> Options -> Privacy -> Mail Content -> Exceptions to see if that user or website is listed as an exception.
It might also be a bug in Thunderbird, causing to not show these images. To check this, copy or move the message to one of your local folders and check if the images still don't display.

Multi Mapping with out BPM and Receiver Determination Condition

Hi Masters,
My Requirement Was:
Proxy will send the data to XI system, Based Customer group number[1000,2000,3000,4000], I need to split the message into 4 messages, and sent to 4 Different location, based on Customer Group condition.
For message split, I fallowed below weblog.
/people/jin.shin/blog/2006/02/07/multi-mapping-without-bpm--yes-it146s-possible
Problem is file split correctly, but data goes to all customer groups..
EX
If they send the customer group 1000, I need to send the customer group 1000 file to BS1[Business Server1],
If they send the customer group 2000, I need to send the customer group 2000 file to BS2[Business Server1],
Please guide me,
Thanks,
ANU-

Hi,
Develope it like follow.
Source Structure- Same for everything.
Create 4 different structures for all targets, create 4 different msg types, 4 inbound message interface ( i think you are creating single Message type now, that is the mistake)
In message maaping, add 4 target message types in same MM.. i hope i am clear.. ( same like in blog /people/jin.shin/blog/2006/02/07/multi-mapping-without-bpm--yes-it146s-possible he has created 2 message types USER_1 and Employee)
keep occurence of all of them 0 to unbunded (not necessary)
Now create mapping for each message type (same like USER_1 and Employee, imagine them like different message types virtually).
Map message type with the source field and mention the condition which you want test using graphical functions. i will say if x e equla to 1 creatif --> target.
I hope i m clear till now...
thanks.

Google map data not displaying correctly in a spry collapsible panel

I created a spry collapsible panel into which I've put google map data. The map placed in the collapsible panel looks and functions OK but shows my location in the wrong place. I tested it by putting exactly the same google map elsewhere on my page and this time it displays my location correctly. Here is a link to my test page: http://www.cornucopia-design.co.uk/BatimTest/map3test.html . Mouse over the 'view our location' link to see the incorrectly located map. It places my location in the top left corner rather than in the centre. When you click on google's 'view larger map' links, they both then display the location identically. Anyone have any ideas about what's going on here? Is the coding for the collapsible panel doing something to the google code? I'm not a great code expert so any help would be greatly appreciated. Thanks

Hello, thank you for your helpful comments. At least I now won't waste any more time trying to get this to work if it just won't... I'll just have to display the map in another way.
Just a point about your suggestion of offsetting - I had thought of that but if I did that, when someone clicked on the map, they would be taken to the wrong place as, as I said, even though it displays incorrectly in my panel, the data IS correct and therefore correctly linked back to google maps.
Thanks anyway.

Lightroom 5.2 map module not displaying maps

I am having all sorts of problems with Lightroom 5.2 and wish I'd just stayed with Lightroom 4. I've already posted about not being able to import directly from an SD card in my laptops reader, and have at least found a work around to that (copy files to hard drive them import - I see others have found the same thing and it works just fine).
Now I have realised that the map screen in the map module is blank. I had this problem initially with Lightroom 5, and then it seemed to resolve itself. It is refusing to resolve itself in Lightroom 5.2 however. I've searched on the web for similar problems, and have found some responses to blank map screens in Lightroom 4, but they are so technical I haven't got a clue where to start trying to follow them.
So, I am a simple soul who needs a simple answer. I am using LR 5.2 on an HP laptop running Windows 7. In the map module, where I already have GPS data (from a Canon EOS 6D) it is displayed in the metadata, and the little pop up box shows the number of photos at selected locations etc. But the central map screen is black. If I search, the screen stays black although it appears as though it has gone to the location. The Navigator screen is blank too. And yes, I am connected to the internet and LR5.2 seems to be able to find the internet (I checked by going into the web module).
Can anyone help me please. I like to put GPS locations on my photos prior to upload to Flickr, and whereas they are there from photos from my 6D, they don't exist for photos taken on my Canon Powershot.

A work-around that I am using is to run Lightroom as an administrator on my Windows 7 system (right-click on the icon and choose run as administrator). Everything then works ok. I also needed to run as an administrator to be able to update some plug-ins I was using. I fixed the plug-in update issues by changing the permissions on plug-ins folder. I suspect that it is a similar issue with the maps.
I have not figured out what folder or files need to have the permissions altered to stop Lightroom from working in the unelevated state but if someone reading this knows please share. I saw some posts related to the same issue but on Macs but the Windows configuration is different.
Dan

INTERFACE MAPPING wa not Displaying in Receiver Determination (Extended)

Similar Messages

Maybe you are looking for