Interface Monitoring by Business Prozess Monitoring

Hallo,
I have implement the first Steps for Business Process Monitoring. I have create the IDocs in the Satellite System an i want to select the Interface in the Solution Manager. I open the Business Process Monitoring from my Solution and open the Process. In the Process is the Step Interface Monitoring. I will choose my Interface but I have no chance to selection. Have anybody a Answer on this Problem?
Thanks

Hello Roland,
Martin's tip should be sufficient to select the interface. Anyway you should perhaps have a look under https://service.sap.com/bpm --> Media Library --> Technical Information --> Setup Guide - Interface Monitoring.
Best Regards
Volker

Similar Messages

Queries on Business Process Monitoring (BPM) & Interface Monitoring

Dear all,
I have got a few queries on the subject and would greatly appreciate any valuable inputs.
Before I proceed, want to clarify that I have downloaded all overtly available documents (PDFs, SIMs) from the following URLs:
http://service.sap.com/rkt-solman
http://service.sap.com/solutionmanager Media Library
http://service.sap.com/bpm Media Library
I may not have read them all though since I come from a Functional angle.
Kindly reply to whatever query you can please. Not all of them are sequential.
Queries:
(1) How are Interfaces with External Systems (beyond the firewall of the enterprise) monitored ?
(2) Is it really worth listing all such External Systems as Logical Components in their own right ? I guess this makes sense if at a Process Step level, one wants to list a 'specific' Logical Component involved instead of 'generic' term like External System. However, it would benefit only if Interface Monitoring is feasible; isn't it ?
(3) There are Interfaces which are built between SAP and External System and serve various Business Processes under various Business Scenarios. In such circumstances, it is not easy to list which Process 'owns' the Interface. Therefore, under a normal Implementation Project structure (SOLAR02), choosing a particular Process Step, getting into 'Development' Tab and listing the Interface Program name may not be feasible, since there is no particular place where it belongs.
Is it therefore a good idea to create namesake Scenario for capturing all interfaces and list a library of all interfaces and store documents right there ? If so, will these namesake processes be of any use in BPM at a later date ?
(4) If my primary objective is to accomplish Interface Monitoring and not Business Process Monitoring per se, is it a good idea to create a new Solution Landscape, and manually create Business Processes that are suited to list Interfaces than to assign Template or Implementation Project to the Solution Landscape, and inherit those Processes ?
(5) What is it that a SAP Competence (Support) Centre will find as a 'major' gain in activating BPM to monitor Interfaces alone - is there something that SolMan's BPM based Interface Monitoring gives more than what PI level reporting may provide them with ?
(6) In Interfaces with Non-SAP Systems (some of them are old/ proprietary legacy systems with Credit Card companies; some of them are like 'Active Directory' servers), is it possible to define Metrics for BPM that such systems will contribute to SolMan, for reporting purposes ? Or, is it too much to hope for
Thanks again, for your patience and advance thanks for your kind responses.
Srini
Bes

Hi,
Welcome to BPM
You have asked too many questions in a single Post, Please read rules of engagement before posting
You can monitor the following without any trouble.
● ALE/EDI
● qRFC
1) Its obvious, if your firewall blocks all your request to external enterprise, it is not possible to monitor.
3) These interfaces are not the one related to development tab in SOLAR02, you have to map them from BPM.
4) Yes, you don't have to depend on any project for your processes, you can add it in your Solution Landscape.
5) Post a Separate Thread!!!
6) Post a Separate Thread!!!
Hope this gives a better idea.
Feel free to revert back.
--Ragu

Business Prozess Monitoring -- Workflow Prozess

Hallo,
I will monitoring a workflow - process. The Workflow generate a Container which comprise some structures or flags. I will check the Content of the structure or the flag, if there have the correct data. Is it possible to check the Workflow with a ABAP Program or can i use one BADI or other thing? Which BADI can i use.
I thank you for your answers.
Thanks

Hello Roland,
Martin's tip should be sufficient to select the interface. Anyway you should perhaps have a look under https://service.sap.com/bpm --> Media Library --> Technical Information --> Setup Guide - Interface Monitoring.
Best Regards
Volker

Interface Monitoring - any example from your experience please ?

Hi Gurus,
In Interface Monitoring (as a subset of BPM), as you may be aware, as of Software Component ST-SER Release being 700_2008_1, a new functionality is supported:
http://help.sap.com/saphelp_sm40/helpdata/en/2c/40328724e2431ba71958275b15e9fb/content.htm
Well, I am keen to learn from your experiences if you have already used this.
My specific question is: Can you please share an example, from your experience, an example of Interface Scenario, Interfaces and Interface Steps for SAP interacting with Non-SAP systems inside/outside the company?
Best regards,
Srini

Closing this for housekeeping sake.

FWSM interface monitoring and best practices documentation.

Hello everyone
I have a couple of questions regarding vlan interface monitoring and best practices specifically for this service module.
I couldn’t find a suggestion or guideline as for how to define a VLAN interface on a management station. The FWSM total throughput is 5.5gbs and the interfaces are mapped to vlans carried on trunks over 10gb etherchannels. Is there a common practice, or past experience, to set some physical parameters to logical interfaces? "show interface" command states BW as unknown.
Additionally, do any of you have a document addressing best practices for FWSM? I have this for other platforms and general recommendations based on newer ASA versions but nothing related to FWSM.
Thanks a lot!
Regards
Guido

Hi,
If you are looking for some more command to check for the throughput through the module:-
show firewall module <number> traffic
Also , I think as this is End of life , you might have to check for some old documentation from Cisco on the best practices.
http://www.cisco.com/c/en/us/products/collateral/switches/catalyst-6500-series-switches/prod_white_paper0900aecd805457cc.html
https://supportforums.cisco.com/discussion/11540181/ask-expertconfiguring-troubleshooting-best-practices-asa-fwsm-failover
Thanks and Regards,
Vibhor Amrodia

Problem to deploy to a WebService interface for ADF Business Components to Weblogic Server

Hi,
I'm trying to deploy a custom application ,in which i have exposed ADF Business Components through a WebService interface, to a standalone weblogic server.
Application Module is configured with a Service Interface for ordinary ViewObjects.
Now I want to create a EAR file of this application to deploy it on the weblogic server.
But I got an error while deploying it.The error i am getting is shown below.
ERROR: No Java EE modules detected in EAR archive. Deployment aborted. == (oracle.jdevimpl.deploy.ear.WeblogicAssembler)
I have followed the steps mention in the below link :
http://technology.amis.nl/2010/12/29/quickly-creating-reploying-and-testing-a-webservice-interface-for-adf-business-components/
I'm using Jdeveloper 11.1.2.4 on windows.
Please suggest what i could be doing wrong.
Regards,
Himanshu

Does the deployment profile include Java EE modules?
Refer
Java EE Developer: ERROR: No j2ee modules detected in EAR archive. Deployment aborted. == (oracle.jdeveloper.deploy.Veto…

Adding a interface to a Business system

What permissions do i need to be able to add interfaces ..sender and reciever to a business system. If the business system is defined as a third party system..can i add the sender and reciever interfaces.
venkat

Aamir,
Can you elaborate a bit...what i was looking for was this..when you have a business service...in the tab for reciever i can assing the inbound and/or outbound interfaces.
Thats what i meant. of course we do have to create the rest of the Configuration items.
However in my case we are unable to add the inbound and outbound interfaces to the Business system...Why..?
That was my issue.
Venkat

SM Interface Monitoring (BPM)

Hi,
O.K I have setup successfully the BPM in SOLMAN for cancelled, delayed ..etc mintoring but interafce monitoring for IDOC's seems abit elusive.
For a standard IDOC monitoring (i.e. by message type and status), does anyone know the requried steps to implement as part of a BPM activity.
I know that BPM has an Interface step but need better understanding of the required steps for activate monitoring.
Thanks

Hi Marco,
Follow these steps as a guide:
To setup BPM you have to define:
(1) Business Process
(2) Steps
(3) Details business process
(4) Activate BPM
You setup 1-3 in Solution Landscape-->Solution Landscape maintenance. This setup is site specific.
I'm assuning your logical components have been setup in SMSY.
Final steps will be actvating BPM. Note if 1-3 haven't been done, you wont see the list in activate BPM for that particular process.
Also see "service.sap.com/bpm" for detailed instructions.
Hope this helps.
rgds,

PI 1.3 Interface Monitor is not working

Dear all,
Today, I found one more very basic monitoring of Cisco PI 1.3 is not working.
I enabled interface health monitoring on Cisco PI 1.3 for some critical ports.
However, even I shutdown these ports the PI still show them as UP.
I am really disappointed with PI.
Best Regards

1. Yeah I Have checked Changes done on the RPd.
2. I have run a sample report on the answers and also a dashboard created
3. The sample report run has not Dynamic variables or any other system variables.
Thanks for the reply.

LMS 4.2.2 Device Interface Monitoring

HI,
On LMS 3.2 there was a way to disable the monitoring of Device Interfaces.
Examples are ISDN30 Channels, which go up and down during calls. I could disable the channel monitor on the relevant device and only monitor the Circuit as this is the main device to monitor.
I can not find the same option in 4.2.2
Could some provide the link.
Thanks

Monitor -> Fault settings -> Setup -> Fault Device Details
From there you select the device you want do modify.
To be more precise...
https://yourservername/dfm/deviceReports.do?navid=DDV_Asset

Questions about interfaces,monitors,keyboards,cables help please

I just bought a macbook pro 1.87ghz. w/ 1 gb I would like to record music primararly acoustic stuff (john mayer type stuff) I was wondering what types of
interfaces or keyboards, mics, monitors, cables ,should I buy to get the most professional sound with. I have a budget of about 1200.00 I want to spend any recommendations? Please Help I appreciate your time:)

What I would probably go with in this situation, using the limited information you have given:
Interface - Presonus Firebox $300
Keyboard - M-Audio Oxygen 8 v2 $150
Mics - Studio Projects B1 and C1 $300
Monitors - Event ALP5 $300
(really would depend on whatever small monitor sounds best to you)
Cables (firewire, usb, mic, stands, etc.) - $100
Now you will probably get as many different answers as you will responders but the best advice I can give is to read everything you can on recording and mixing. During this time, save up another $800 or so and treat your recording and mixing area.

Why is my user interface monitor resolution dependent?

The user interface I created with Labview is screen resolution dependent. That means I built a user interface application exe on my computer. But when I run the exe on another computer with lower resolution, the application window was enlarged and some of the controls were cut off. I have had the problem all the time and it bacame a famous issue in our engineering group . By the way, I didn't check any box in the VI Property\Window Size window. Can you help me to fix this problem?

I use Labview 7.1.1 and had this issue, the fix is under VI Options.. goto Window Size and check "Maintain proportions of window for different monitor resolutions", there is also a check box for "Scale all objects on panel as the window resizes".
Give these a try they should work for you.
Andrew Alford
Production Test Engineering Technologist
Sustainable Energy Technologies
www.sustainableenergy.com

CCMS alert on XI interface monitoring : Error status of XML Messages

Hello Everyone,
Please can anyone let me know on how we can setup ccms alert monitoring on tcode: SXMB_MONI for XML messages which are in error status. Do we have any MTE class available in XI system ?
Please share your expertise on this ..
thank you !
Regards,
Tushar Rathi
Edited by: Tushar Rathi on Mar 23, 2011 9:24 AM

Hello Everyone,
Please can anyone let me know on how we can setup ccms alert monitoring on tcode: SXMB_MONI for XML messages which are in error status. Do we have any MTE class available in XI system ?
Please share your expertise on this ..
thank you !
Regards,
Tushar Rathi
Edited by: Tushar Rathi on Mar 23, 2011 9:24 AM

XI server: External XML to SAP interface: No own business system

Hi, we have inbound XML interfaces into SAP via XI using JMS queues. We have a dev, test and int. test environment. The dev and test environments work OK. The int. test environment has just been set up. The XML appears in the XI server, viewed via monitor SXI_MONITOR. It has a red flag error, within the XML trace, No own business system, seee below for full msg. I've test in config and the receiver is determined correctly. Can anyone help? Using XI version 3.0, SP14.
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- 
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="1">
<SAP:Category>XIServer</SAP:Category>
<SAP:Code area="CONFIG">LCR_ERROR</SAP:Code>
<SAP:P1>No own business system</SAP:P1>
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText>No own business system</SAP:AdditionalText>
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack />
<SAP:Retry>M</SAP:Retry>
</SAP:Error>

hi,
have you tried executing TCODE - SLDCHECK
on your XI ?
if not check it and see it everything
is ok over there
if not check your busines system inside SLD
Regards,
michal

Integration directory : select IDOC interface for WAS business system

Hi,
While adding a receiver determination for an WAS business system, I do not get any IDOC based message interface from the design repository proposed for my business system in the popup dialog.
The only interfaces that appear are for the non SAP standard SWCV that we added to the business system. But no interface for the APPL 5.0 SWCV ( or BASIS 7.0 ) appears.
In the SLD this component is correctly listed for that WAS .
If I remove all the default search criteria , eventually, the in terface appears but after selecting it I get a message saying :
"Message Interface does not exist in any software components installed on this business system "
Since everything looks ok in the SLD I'm puzzled. How does this look on other systems ?
Any ideas
( The business system was updated from APPL 4.70 / BASIS 6.40 to APPL 5.0 / BASIS 7.00 some time ago but I don't know how it look before the upgrade of the business system )
rgds
Dirk

Hi Bavesh,
Yes, It's correctly listed. I did not manually link these components to the technical/business system. This happened automatically by the SLD data collector service. I also cleared the SLD cache several times,
rgds
Dirk

Interface Monitoring by Business Prozess Monitoring

Similar Messages

Maybe you are looking for