Interface shows only Sources Panel. How to show the Target & Map Panels

Someone must have hit some keys to hide the Target and Map panels in the Interface so that when I create a new interface, all I see in the Diagram tab is the Sources Panel. Does any one know how I can restore the other two panels?
Thanks.

Any suggestions ???

Similar Messages

How to call the second mapping in the first mapping fails in the BPM

Hi All,
I have a scenario like this.
There are two mappings. There is a one condition while genearying the root element of the first mapping. If this condition is not satisfies the first mapping will fail. If this mapping fails i want to trigger another mapping.
How to achieve this functionality.
If it is possible with BPM. how to call the second mapping in the BPM.

Hi
you can not create the containter for the synchronous interfaces.
you have to craete the two asysnchronous abstact interfaces .
thenusing those two abstract interfaces you have to define the containers in the BPM.
and you also have to define the interface mapping b/w those two abstract interfaces.
once you define the interface mapping you will be able to select the interface mapping using the transformation step in BPM.
once you select the interface mapping in BPM then you will be able to selece the interfaces
if you still face the problenm please reply me back.
Thanks
Rinku Gangwnau

How to specify the target name while deploying a code in OSB-- Plz Help

Hi all,
Am working in creating a cluster environment. For my testing i created a new managed server(OSB_Server) in 9001 port in the admin console itself and that server started running. The default managed server(Admin_Server) is in 7001 port. So when i deploy a code in 7001 sb console the WSDL gets exposed in 7001 because the default admin server port is 7001. While deploying a code in service bus admin console we are not specifying the target name. So how to specify the target name while deploying the code in service bus admin console. Plz help me.
Regards
Prabhu

Hi Prabhu,
There are three kind of server architecture possible for OSB -
1. Single server - Everything gets deployed on Admin server itself
2. Admin Server + Single Managed Server for OSB -- OSB configuration gets deployed on OSB managed server. OSB resources (proxy service, WSDL, Schema) will remain available on OSB managed server port only and NOT on admin server port
3. Admin Server + OSB cluster -- OSB configuration gets deployed on OSB cluster. OSB resources (proxy service, WSDL, Schema) will remain available on OSB Cluster port(s) only and NOT on admin server port
Converting one type of server architecture to any other type, requires a manual tedious process, so it is suggested that you create domain accordingly i.e. if you need clusters then while creating domain itself, create OSB cluster, so that all OSB applications gets deployed to OSB cluster. I will suggest you to create a clustered domain from scratch and import the configuration from your existing domian to this new clustered domain.
You may refer-
http://download.oracle.com/docs/cd/E17904_01/doc.1111/e15022/toc.htm
Regards,
Anuj

How to make the TARGET of clone stamp 2 simultaneous layers?

Does anyone know how to make the TARGET of the clone stamp, multiple simultaneous layers? Or maybe more accurately, how to clone stamp the top layer and have the layer underneath doing the exact same cloning simultaneously. Or maybe a workaround? I've tried linking the layers, and multiple layer selection with no joy.
Here is what I'm trying to do. I'm duplicating a layer, then applying LucisArt to one of the layers to greatly exaggerate local contrast. Though I'm not using LucisArt as the final, I want to use it to assist in smoothing blotchy skies, banding, and finding hidden camera sensor dust spots.
I want to clone stamp on the LucisArt layer so I can watch my progress, but also have the underlying layer doing the exact clone stamping at the same time. Thanks ... Aaron

Thanks everyone.
Dennis, You are correct. I know how to selectively apply the LucisArt filter, that's not what I'm looking for. I want my end result to have NO LucisArt effect at all. I'm trying to use the LucisArt layer to drastically exaggerate flaws such as camera sensor dust, AND I want to correct these flaws on the LucisArt layer where they are obvious. The LucisArt layer is only for reference. But the trick is to get CS3 to do to the non LucisArt layer, exactly what I did to the LucisArt layer.
So imagine I have this otherwise nice photo, but the photographer (this happened) had an amazingly dirty sensor. Half of the dust spots I can hardly see, but the client wants it super clean. So I duplicate the layer so I have two exactly the same. I then apply a strong LucisArt filter the top layer which reveals all the spots including many I couldn't see on the original layer. I'd like to fix all these spots with the clone stamp tool on the LucisArt layer where I can see them easily, then toss that layer. The original below would have all those spots fixed, but sampled from it's own layer and stamped to it's own layer.
As it is, I can click the LucisArt layer on, place my finger on the spot, then turn that layer off and hopefully see the spot and remove it from the layer underneath. Very tedious indeed.
... Aaron

How to find the target system landscape

How to find the target system landscape - the clients present in the target system. Please explain in detail.
regards,
ravikiran

this FM is giving only the current system id. I want to find the target system details.

How to specify the target for a command button action?

Hi can anybody explain how to achieve the target feature, i mean i need to display the result of the action in a different window after clicking on the button. Is there anyway to achieve this?
I want to click the button using Javascript.(using button.click event).
Thanks in advance

Thanks for the reply Stas, but it is not the solution I wanted. I want display the result of that action into a different frame of the window. As we have target attribute of the anchor tag in HTML. The target attribute of the h:CommandLink is not working. I tried that.
Anyway thanks again.

How to load the google map into an empty movieclip

how to load the google map into an empty movieclip ? Thank you

if you're using as3, check the google maps api for flash. if you're using as2, check the google maps api for javascript and use the externalinterface class in flash.

When updating to target only few records got added to the target

When updating to target only few records got added to the target from the transferred recordsu2026what could be the reason?
Edited by: MohanDP on Jun 28, 2010 7:44 PM

Hi Mohan,
When updating to target only few records got added to the target from the transferred recordsu2026what could be the reason
There might be a routine in your Transformation which might be filtering few records(or)
It is possible that you will have multiple records for one keyfield in PSA. But when you try loading the same to datatarget like Cube, the result will be added.
For ex, say you have Profit center US00000593 in PSA with two rows with keyfigure(say some ABC) values 100 & -50.
Then when you load the data to datatarget, you will have only one row in it with Profit center US00000593 & values for keyfigure ABC=50 (i.e 100-50=50). So most of the times we will be having added records less than transferred records.
Hope it is clear!
Regards,
Pavan

Need help on how to create the simple mapping using ORACLE DATA INTEGRATOR

Hi guys,
am new to learn odi.. please share me or steps how to develop the simple mapping using ODI...

Hi,
I am a newbie to Oracle Data Integrator as well. You should have a look here first; http://www.business-intelligence-quotient.com/?p=379
Try to play around with ODI and then come back if you have specific questions. You should better move to this ODI-forum; Data Integrator
Good Luck,
Daan Bakboord
http://obibb.wordpress.com

LSMW - The source field is longer than the target field in MEK2

Hi,
I tried to create a simple LSMW script to end date condition records using MEK2 transaction.
I provide Condition type, Plant, Material, Start Date and default Valid from and Valid to dates.
When the program is generated, it defines just 1 character for Start date and when I try to map the date field from source, it gives following error message.
Attention: The source field is longer than the target field.
Message no. /SAPDMC/LSMW_OBJ_040013.
Not sure why it is happening. I am on 46C.
Please let me know if anybody come across such situation. I have checked all aspects, tried recreating in different systems but ended up with the same problem.
You help in this regard will be highly appreciated.
Regards
Kasi

It is a standard error, and I have not found any OSS note to fix it. In order to solve it, you can use this workaround:
- Export the recording into a txt file
- Edit the file, and modify the information correspondent to domain, data element and lengths (internal and external) fields, and save it
- Import the recording
For example, I had problems in a recording with the field SEL_DATE of the transaction VB02. Then, I changed these values:
Values before changes:
/SAPDMC/LSGBDC ZTEST ZVB02_ZA01 0018 0000 SEL_DATE DATE_ON Valid on CHAR1 CHAR1 SEL_DATE 0000000000 000001000001000001CHARC
Values after changes:
/SAPDMC/LSGBDC ZTEST ZVB02_ZA01 0018 0000 SEL_DATE DATE_ON Valid on DATUM DATAM SEL_DATE 0000000000 000010000010000010CHARC
(values 01 has been replaced by values 10)
The values changed correspond to fields:
/SAPDMC/LSGBDC-PARDOMAIN
/SAPDMC/LSGBDC-PARDATAELEMENT
/SAPDMC/LSGBDC-LENG
/SAPDMC/LSGBDC-INTLEN
/SAPDMC/LSGBDC-OUTPUTLEN
The information that you have changed should be updated in table /SAPDMC/LSGBDC, where all the information of the recordings is stored. Check this information has been updated after recording import.
I hope this solution be useful for anyone...
Regards.

In XPath routing system is showing the Target message type

hi all,
while givine XPath condition at receiver determination, it system is giving source structure, but i want to select field from target structure.
Plz help me its very very urgen.
POINTS will BE REWARDED.
regards
sreeni

Hi,
Try to use Interfaces determination to put the codtion.
Check some links on xpath.
/people/shabarish.vijayakumar/blog/2005/08/03/xpath-to-show-the-path-multiple-receivers
http://help.sap.com/saphelp_nw04/helpdata/en/43/a5f2066340332de10000000a11466f/content.htm
http://www.w3schools.com/xpath/default.asp
http://www.w3schools.com/xpath/xpath_operators.asp
/people/shabarish.vijayakumar/blog/2006/06/07/customise-your-xpath-expressions-in-receiver-determination
/people/suraj.sr/blog/2006/01/05/multiple-inbound-interfaces-within-a-service
Regards,
Phani
Reward points if Helpful

No portal, only EBPuFF06SUS, vendor how to reply the bid and auction?

According to standard functions, vendor use portal to response bid invitation and auction, am I right?
Our customer have no portal, only EBP＆SUS, if want to use sourcing functionality, vendor how to reply the bid and auction? any solution on this case?

Hi,
Bidder logon to SUS. SUS has manu link for Bid Invitation. When bidder selects Bid Invitation link in SUS, application brings up the EBP ITS screen.
+ You have to set up bidder replication from SUS to EBP
+ Single Sign On should be setup from SUS to EBP
+ SUS bidder should have SAP_EC_SUS_BIDDER role
Please check SUS customizing.
SUS -> Master data -> Maintain Systems for Synchronization of User Data
Regards,
Masa

How to set the target directory from source filename using adaptor module.

Hi,
How im using a logical bypass scenario.I have to set the target directory using the sorce filename.There is no chance of using a Java UDF as my scenario does not have a Mapping(as it is a Bypass Scenario).The only option that i got is to use a Adaptor module.Can anyone help me this.
Thanks,
Bhargav

Hi,
See this link,
http://help.sap.com/saphelp_nw04/helpdata/en/e9/61e1407e858031e10000000a1550b0/content.htm
hope it helps.
Regards,
Akshay Jamgaonkar.
Reward points if find useful.

In VA45 the coloum order quantity is showing the targeted quantity

Hi Friends,
In VA45(Lists of contracts by partners) I belive in the coloum of Order Qunatity the total sales quantity has to be shown but the system is showing the entire targeted quantity. i have created an contract for 50 quantity and if i order for 5 with ref to that contract, in va43 (dispaly of contract) it is showing 50 as targeted and 5 as ordered but in va4s in the targeted it is showing 50 and in the ordered coloum it is showing the same 50 instead of 5.
1.Can any one explain what is the coloum ordered quantity in VA45?
2. Any solution's
Its urgent , kindly help me

Hi Huey Chin Liew ,
I am very soory, I coulnot understand what is the consulting note, kindly explain me and just give me the path.
So you say in VA45 the coloum order quantity will display the same quantities in the targeted quantity coloum. I feel it has to display the total quantities which are booked as orders with refrence to that contract.
Kindly explain.

Create IDoc from flat file - How to do the message mapping

Hi everybody,
I want to create an IDoc from a flat file.
The file structure looks like this:
MT_XYZ
- Node001       0...1
- Leaf001
- Node002       0...unbounded
   - Node003    0...1
      - Leaf002
      - Leaf003
   - Node004    0...1
      - Leaf004
   - Node005    0...1
      - Leaf005
I have created a mapping and all the other stuff to set up the IDoc adapter.
Now when I try to test the interface the IDoc is created properly but obviously no information from the nodes "Node003" to "Node005" is inserted in the IDoc. Only the information kept in the elements (leafs) of "Node001" are inserted.
All IDoc segments and their "Segment" elements are linked to the root node of the file structure "MT_XYZ". I tried to link some IDoc segments only to "Node002" but then this segment is not created.
So how can I set up the message mapping in a way that the information from "Node003" to "Node005" is transported to the IDoc? Can anyone help me here?
Thanks in advance for all answers!
Regards,
Torben
Edited by: Torben Hönemann on Dec 14, 2009 4:26 AM

Hi Torben,
>>I want to create an IDoc from a flat file.
So you are using File content Conversion on the sender side. Right?
>>no information from the nodes "Node003" to "Node005" is inserted in the IDoc.
Are these information available in the source XML (you can check in transaction SXMB_MONI-> Input Payload).. There is a limitation in File Content Conversion of File adapter and it is that I can make an XML structure of 3 level.. Since these nodes details are in level 4 and 5 they should be missing in Source XML structure itself (after content conversion of File adapter). check that
>>So how can I set up the message mapping in a way that the information from "Node003" to "Node005" is transported to the IDoc? Can anyone help me here?
So you need to take an alternate approach where you do File Content Conversion and make 3 level structure.. then using a mapping convert this three level structure to your 5 level one and then try to map with the idoc.
Check this blog for an idea
http://www.riyaz.net/blog/xipi-file-content-conversion-for-complex-structures/
http://www.riyaz.net/blog/xipi-convert-flat-file-to-deeply-nested-xml-structures-using-only-graphical-mapping/
Regards
Suraj

Interface shows only Sources Panel. How to show the Target & Map Panels

Similar Messages

Maybe you are looking for