Interface to go between mixer and computer.

I'm looking for something to hook up between my mixer and my computer so I can record at least 2 separate tracks at one time in GB.
Anyone have an idea of what I'm looking for?
PB G4 Ti Mac OS X (10.4.6)

If all you want is 2 tracks at once, then the mixer will do that as described, or a 2 channel interface will do that ALONE, and the mixer wouldn't be needed. I see no reason to connect the mixer to an interface to get 2 separate tracks. Using the mixer in this way WOULD be desirable if you were wanting to get a stereo mix of a drum kit, for example. Then you could pan the drums where you like and have 2 tracks of the drums in stereo, but that doesn't sound like what you are saying. If you simple want 2 separate tracks, then either will do fine. Both are not necessary.

Similar Messages

Internet sharing between cellphone and computer us...

I have watched some videos in youtube about internet sharing between cellphones and computer using "BLUETOOTH"... How do they do that? How can we do this? Anybody here can share to us how to do this??

24-Aug-2008 12:28 PM
monkeyboy85 wrote:
I personally would not of thaught this is possible as bluetooth is essentially just a radio signal, obviously it can transmit data but i dont think it has the ability to stream a broadband connection. Could be completely wrong but thats what i think.
You are wrong
Most Nokia phones with a bluetooth interface can let you connect your computer to the Internet using your phone as a modem connected by bluetooth. So, BT definitely can support the data stream.
Enabling a computer to use the phone's Internet connection over BT or via USB cable is possible with no additional software on the phone. Doing the opposite, allowing the phone to use the computer's Internet connection via BT, requires additional software. GNUBox does just that.
Was this post helpful? If so, please click on the white "Kudos!" star below. Thank you!

No connection between iPhone and computer

I have No connection between iPhone and computer. Please help me. My iPhone (4s) went nuts a little while ago. Nothing happend when I connected the charger. I had to take out and put it back in again and again and again, between 2-10 times before the charger finally was connected. It's been like this for a while now and a did'nt really have that mutch problem with it. Until today when I tried to sync/backup/restore the whole phone. It started to sync but stoped at the sync of the 5:th app. tried to start over but now my computer can't "find" the phone. It says that the USB-device is not reconizeble.
Please help me.
Sorry for the bad english.

See Here...
Device Not Recognised
http://support.apple.com/kb/TS1538
And Here
iPhone, iPad, or iPod touch not appearing in iTunes
iPod appears in Windows but not in iTunes
Also, Here...
Unable to Update or Restore
http://support.apple.com/kb/HT1808

Differences between iOS and computer views of a course?

So this year not all of my students will have iPads so anything in my course has to be accessable via a computer/itunes connection. I have created my course, completed the profile, written my outline and started adding "materials" and posts. The course has been published and shows up under our school.
Any .pdf's I add to documents/materials or post as an assignment show up on both the ios devices and computers/itunes/itunesu.
Any .jpgs I add to materials/images or post as an assignment show up on the ios device but show as "ios only" on the computer/itunes/itunes u view.
When I "Add Post" then add to the "Message" field, it is pushed to the ios devices and shows up as a message, it shows up under the course on the ios devices but never shows up on the computer/itunes feed.
Is there a list of what you can put into your course that will show up on both ios devices and computer/itunes connections? Will .mp3's, .mp4's work? or will they do the same as .jpg's?

Hi,
I just posted a response to another question regarding iTunes U on a PC or Mac. Although it doesn't completely answer your question, this part of the response from Course Manager Support does address it:
If you were to make a publicly available Collection on iTunes U, students could download or view many course materials such as lectures and podcasts. But to maximize the full functionality of a course, such as subscribing, reading posts, and viewing assignments, the iTunes U app on an iOS device is currently a requirement.
It may be worth it to ask support to see if there is a more comprehensive list of the differences. Please post what you find out here.
Thanks,
Ken

Difference between dbms_stats and COMPUTE STATISTICS

Hello everyone,
Can anyone tell me what is the difference between:
dbms_stats.gather_table_stats(
    ownname => 'me',
    tabname => 'ORGANISATIONS',
    estimate_percent => dbms_stats.auto_sample_size
);and
ANALYZE TABLE ORGANISATIONS COMPUTE STATISTICS;I guess both method are valid to compute statistics, but when I run the first method, the num_rows in USER_TABLES is wrong.
But when I execute the second method, I get the correct num_rows.
So, what is exactly the difference and which one is best?
Thanks,

Hello,
It's not recommended to use ANALYZE statement to collect Optimizer statistics. So you should use DBMS_STATS.
Else, about the number of rows, as you used an Estimate method, you may have a number of row which is not accurate.
What is the result if you choose this:
estimate_percent => NULL
NB: Here, NULL means COMPUTE.
You may have more detail on the following link:
http://download.oracle.com/docs/cd/B19306_01/server.102/b14211/stats.htm#PFGRF003
This Note from My Oracle Support may give you many useful advices:
Recommendations for Gathering Optimizer Statistics on 10g [ID 605439.1]Hope this help.
Best regards,
Jean-Valentin

520 - Connection between mobile and computer

I would like to upload music and videos to my Lumia 520. The OS on my computer (Windows XP SP3) always needs a support app., starts every kind of programs and doesn't recognize the mobile phone. Is it any opportunity to connect the phone to the notebook (PC)?

Also need Windows Media Player 11 or higher ..
Next you may try is after connecting the phone to PC, open device Manager on the PC and under Portable Devices..Right Click on the Lumia device listed .. and select Uninstall-->OK. Then at the top ...Action-->Scan for Hardware changes and wait till the Drivers get reinstalled ..
Now check ..

Transferr of songs between ipod and computer

Recently reformatted computer's hard drive, restored Itunes library with no problem. But when I connect ipod, get message that certain songs are in protected wma format and cannot be trandfered. i understand the protective format scenario, but don't understand that if they are in my library why they can't be transferred to the ipod or vice versa. Any suggestions?

iPod cannot play protected wma songs so iTunes will not put them onto it.
iTunes can handle more file types than the iPod itself for various reasons.
http://docs.info.apple.com/article.html?artnum=61476

Does syncing using the music tab a 2 way street between device and computer?

So i went through my music and added ratings to it on my comjputer. i synced my ipod with auto sync and everything transfered over fine. then i accidently added a folder to my itunes library i didnt want and rather then sift through the library and remove the songs added from that folder (since it wasnt my music) i decided to erase the entire library and just re add the folder withonly my music. i thought the ratings would still be there, but they wre all gone. all that work. even my playlists were gone. i mean, they were still there, but no music was in them. even after i re added the same music that once was once there, the playlist didnt auto populate themselves. lets just say i messed everything up, and since my ipod was on auto sync, i knew the next time i plugged it in it would erae all the ratings and playlists. so i used a program called iexplorer and it let me copy all my music back to itunes and i got most of my ratings back (not the playlist though because my computer crashed while the playlists were being populated and totally forgot about itunes and auto sync, so when i opened ituens, my ipod started syncing and basically it synced the new un orginized library with no playlist and most of the star ratings. For some reason not all the songs had the ratings, but most did. so i cant complain cuz i at least got lucky. ok, now onto the question. i dont want to go through my library again and re do everything, so im going to do it slowly through the ipod while im in transit. my question is, when i update playlist and rate music on the ipod, wheni plug it into ituens, will the ratings and playlist i made on the ipod transfer over? i know this was quite the long post for such a simple question, but i just wanted to share my bumble headed story of how i nuked my library.

The sync is one way - computer to ipod.

No 2 way connection between printer and computer HELP HELP going nuts!!!

On the hp website in downloads for hp officejet 6500 series for windows 7 is "additional information' for installing that particular printer for that windows 7, now under "printer setup not complete" it says how to bypass the problem I have though those comands obviously don't work with my windows xp so can someone translate those commands for windows xp so i could try and fix my problem (hope that all makes sense) Also a few questions, the network is setup and passed so should i need to change any ports or does the network setup do it itself? Do you have to have a separate printer icon for usb and wireless,(though i won't need usb when i get this sorted). And why does the hp solution centre no open it comes up with a file that cannot run how do i fix this? HELP

The sync is one way - computer to ipod.

16:9 Inconsistent Between TV and Computer

I have a movie which has been edited on a very small budget for a charity of which I am a trustee. It is in 16:9 PAL in Final Cut Express 3.5.
I exported it as a referenced Quicktime movie (not using QT conversion).
I created an iDVD project in 16:9.
The movie appears in iDVD squashed to 4:3. But the resultant DVD plays on a TV through a DVD player correctly; however, on a computer using DVD player software it plays squashed, just as it does in iDVD.
So, back to the internet. I found this post on this forum:
http://discussions.apple.com/thread.jspa?threadID=2163719&tstart=45
and a couple of others, where SDMacuser linked to a workflow which uses Quicktime Pro. Since I don't have Quicktime Pro I tried the Anamorphicizer download he also linked to and re-built the iDVD project.
The movie now appears correct in iDVD, and the resulting DVD plays correctly on a computer. But it is stretched horizontally when viewed on a TV.
Since the DVD is for a restricted distribution to people who may use either means of viewing it, it needs to work both on a computer and on a TV/DVD player.
a) if I export the movie as a self-contained Quicktime movie before importing it to iDVD will this overcome the problem?
b) If I invest in QT Pro will this do it?
c) Or do I need a more professional DVD authoring programme?
d) A final workaround would be to add a top-level menu in iDVD with separate (identical) sub-menus for computer and TV, but this would look unprofessional (the movie is only 30 mins so the two versions would fit on a single DVD).
I'm sure there must be a way around the problem - it doesn't happen on consumer DVDs, they play on both platforms.
I have to say that I find it amazing that Apple haven't thought to make their own pieces of software mutually compatible in this respect. I'm also amazed that I haven't been able to find an answer on the Internet.
Best regards
Patrick Cunningham

SDMacUser
Thank you for the rapid response!
Unfortunately we don't have a budget for fully pro applications, unless/until we can find a backer for a longer video project.
This seems like such a small problem. Is there anyone who understands the structure behind how the anamorphic/16:9/4:3 settings are stored? Presumably it is just a matter of a tag in the file headers?
I come from a stills/Photoshop/Lightroom background, where we are able to manipulate the metadata associated with files directly, using a couple of fairly techhie applications, so it seems odd that there is no way of 'tinkering under the hood (or bonnet, as we say here in the UK!)' to tweak the settings.
It seems as though there are at least two flags that need to be set, and they have become out of sync - though why Apple should choose to use different flags in different apps - from the same software developer, which is supposed to be 'the' media developer! - with no straightforward way to synchronise them, is very strange.
I've not used Apple's technical support for FCE or iDVD. Is there any chance they might be able to help?
By the way, I also purchased the Snow Leopard upgrade, but I haven't installed it yet because I noted that one poster here found that anamorphicizer doesn't work under SL - is this still so?
Patrick Cunningham

Move mailboxes between server and computer

Somehow my mailboxes have become scrambled beween those on the server and those on my computer. Can I restore the original storage?
Lelteto

Hi,
In your case, please make sure that the Migration.8f3e7716-2011-43e4-96b1-aba62d229136 mailbox exists by running the following cmdlet.
Get-Mailbox -Arbitration |fl name,alias
In my last reply, I recommend you check if there is any related error or warning in Application log in Event Viewer.
Also, you can export your mailboxes into pst files and then import these pst files.
Hope my clarification is helpful.
Best regards,
If you have feedback for TechNet Subscriber Support, contact
[email protected]
Amy Wang
TechNet Community Support

Slow image data transmission between printer and computer

My work computer was recently updated with Windows 7 from Windows XP. During the migration Adobe Acrobat XI Standard had to be reinstalled. After the reinstallation of Adobe Acrobat XI Standard the data transmission of the scanned image from the printer (HP LaserJet 3030) has been extremely slow. The original installation of Adobe Acrobat pre: migration worked fine - normal data transmission speeds. It should also be noted that a new 64 bit HP print driver had to be installed before Adobe was able to do its basic scanning functions.
Any assistance would be greatly appreciated.

Hey whkling,
Could you please let me know what exact dot version of Acrobat XI Standard are you using.
Also, try printing some other PDF file and check if the same problem persists.
Let me know.
Regards,
Anubha

Version differences between mobile and computer with forced upgrades of $10 plus $20 dollars?

Currently running Numbers v2.3 on Laptop. Recently purchased the latest Numbers mobile app for my iphone for $10 such that I can sync to iCloud both ways. So, I created a spreadsheet on my computer and shared to iCloud. I then edited the spreadsheet from the Numbers mobile app and saved that to iCloud. When attempting to open the spreadsheet at a later time from my computer, Numbers will not allow me to open and instead forces me to upgrade the application to view it for an additional $20.
I'm in disbelief that this is the case but cannot find anything else preventing me from opening the spreadsheet. I'd like to have someone confirm that this is the policy that Apple has set forth?

We are not Apple. We are users just like you. If you want to speak to Apple:
Apple Store Customer Service at 1-800-676-2775 or visit online Help for more information.
To contact product and tech support: Contacting Apple for support and service - this includes
international calling numbers..
For Mac App Store: Apple - Support - Mac App Store.
For iTunes: Apple - Support - iTunes.
Having checked I found that indeed you need to upgrade.

Connection between iPhone and computer.

Hi, perhaps somebody can help me. When I connect via USB the iPhone 4 with my laptop, the laptop doesn't recognise the iPhone, resp. the USB connection.

See Here...
Device Not Recognised
http://support.apple.com/kb/TS1538
And Here
iPhone, iPad, or iPod touch not appearing in iTunes
iPod appears in Windows but not in iTunes
Also, Here...
Unable to Update or Restore
http://support.apple.com/kb/HT1808

Syncing between iPod and computer messed up!

My dad was trying to sync an album onto his nano, but when the songs are imported they come out shuffled in alphabetical order. How can he fix this?

As long as you sync before you start to listen then the iPod and iTunes will always start playback from the same point.

Interface to go between mixer and computer.

Similar Messages

Maybe you are looking for