Interface to SAP TEM

Gurus,
We have an external system for our learning solution. We want to get information from this external learning solution back into SAP Training & Event Management 4.6c. We have all the employees already in SAP. The external system can call BAPI's in SAP. There are no standard SAP TEM BAPi available for passing such information into SAP.
Does anybody know of any function modules in SAP TEM we could use to update course catalogue(create/amend business event groups), transfer course completion details of employees in a business event, transfer elearning business event details in SAP TEM etc?

Hi there Vikki,
IN ECC6.0 then there are stacks of BAPI for Event management that exist in 4.6 Have a look at the function Group RHVI using SE80, you should be able to achive your requirements using these.
Have a good weekend.
Jules

Similar Messages

Swift Net MT-103 Interface with SAP

Hello all,
I am having a hard time to understand the concept and reason to use the Swiftnet MT103 (Outgoing Payment).
1)At what point I will consider MT103 solution versus EDI820 (Outgoing Payment)?
2)What will be the considerations I need to take place when I am creating the Functional Design of this interface with SAP?
3)What will be the steps I need to take on the config side?
4)Do I need to setup inbound interface as well for confirmation once I sent the MT103 file?
5)DME will be only solution that produce this format?
6)Please provide me the File structure of MT103?
I would appreciate your prompt response since I need to represent this to the client.
Thanks

Hi
It is a good practice to know the status of payment file rather than waiting for the bank to call. Yes, if need be, you will need to create an inbound interface.
Many things would depend on the method of communcation with banks you choose (i.e. direct connection or value added network), which needs to be secure and encrypted. SWIFTnet is a product that SWIFT offers to allow companies to build a single connection to SWIFT net and connect to thousands of banks around the globe. I am not sure whether this is a valid scenario for your project. Obviously, there is a cost implication attached to it.
If you are using BCM module, you would need to use a format created in Payment media workbench for MT103 and PI to faciliate the file mapping, conversion, encryption and secure transmission to your bank. In this case, you would build an inbound interface for Status/Confirmation from bank into BCM for Batch monitor.
while if you are not using BCM module, you would map IDOC to MT103. in this case, you would build an Inbound Interface to manage the confirmation message from bank. I have worked on this sort of interface development and developed a report output for users to run.
Hope that this helps
taro

How SAP ECC interface with SAP SRM

Hi all,
I need to know how SAP ECC System interface with SAP SRM in management of Catalogs and Contracts: how can I upload, for example, Catalogs which are on SAP ECC to SAP SRM?
Thanks, best regards,
Maria

Dear Maria Bonomo,
I have gone thorugh the following link and it seems to answer your query:
www.sceis.sc.gov/content/dnld/agydir-1B.pps
Hope this helps you.
Do award points if you found them useful.
Regards,
Rakesh

Winlims interface with SAP

Hi qm experts,
Can anybody could explain to me the details of how shall i interface the SAP with winlims in results recording. I hope that you will give my the full details throroughly. Thanks
Regards,
Matildo, Edsel F.
QM Consultant

This is a pretty broad question. You must use inspection plans and have workcenter set up for use. The workcenter must have a QDR system defined for it.
The QR systems are configured in SPRO. QM>Quality inspection>Subsystems-->Process Quality Inspection using QM-IDI interface.
You might need some help from your BASIS people to complete the config.
You should ask your WinLIMS vendor for assistance. They've done it before and should be able to help you.
Craig

Dcs interface with sap pm

Dear experts,
can anyone explain me the basic steps and information regarding dcs interface with sap .
i want to do this sap implementation for the thermal power station. i want to generate notifications and work orders when the parameteres of particular equipment crosses its range.
how the important parameters from the dcs is linked with sap server. how i can get the data from dcs and pass it to the sap system.
can anyone give the helping hand.

Hi,
You can use XI as a connector instead of ALE to connect mySAP ERP to SAP Business One. The DI API is the connector for SAP Business One.
The DI API or Data Interface API is part of Business One and the Business One SDK. B1i exists to easily connect mySAP and SAP Business One without typical coding that would be required simply by using XI to connect with SAP Business One and mySAP. B1i contains all of the connections, pre-defined content, message handling and error correction for common business scenarios to connect these to systems. Without B1i, you have to hand code everything. If you are not connecting with SAP Business One, then you may not have a need or requirement to use B1i. There are more detailed whitepapers here from the SAP Business One main page on SDN. You should have a look at those.
You should have SAP Portal authorisation to access the following info. Go to sevicemarketplace -> smb -> SBO -> Install'n'Updates->Updates->Updates for SAP Business One->SAP Business One Releases prior to 2004->SBO-MYSAP INTEGRAT.TOOLKIT 1.5.
You can find there an presentation how to Integrate SBO with mySAP via XI (https://websmp203.sap-ag.de/~sapidb/011000358700002285912003E.ppt)
Thanks
Swarup

IDOC type for interface between SAP ECC and SAP F&R

Hi Experts,
I need SAP standatd IDOC type for interfacing between SAP ECC and SAP F&R [SAP Forecasting and Replenishment] using message type u201CFRE_LOC_SITEu201D.
Please help me in finding the idoc type?
Regards,
Krishan

Hi Denish,
You have 2 ways of loading data from R/3 to APO.
1. R/3 to BW cube to APO-BW cube to APO planning area
or
2. R/3 to APO-BW cube to APO planning area
BW can be a enterprise BW system ( independent) or you can use the BW inbuilt in APO also referred to as APO-BW.
The only difference between the 2 BW systems is APO-BW can not take the load of reporting where as the enterprise BW can.
Unless your company policy requires the enterprie BW system, I suggest using 2nd way.
You can load the data from R/3 to APO-BW cube using extractors either generic or standard depending on your data. You need to have a RFC connection setup between APO-BW and R/3. ( This is not CIF).
When you load the data into the APO-BW cube, you just have to load the data from the cube to APO planning area using the transaction /sapapo/tscube.
Refer to [DP Data Mart|http://help.sap.com/saphelp_scm50/helpdata/en/13/5ada58309111d398250000e8a49608/frameset.htm] for more information about the data transfer between APO-BW and APO.

Interface and SAP system issue

hi Experts
Scenario : We have External system (Interface) and SAP system. GR usually done in External system for stock materials PO , then it will transfered and updated in SAP system thro IDOC daily bases.
And then in SAP ,Zreport is there to find out any discrepancy in stocks(Between Extrnl and SAP system).
Problem: They had done GR in external system and they had transferred to SAP throu IDOC. (This usually bieing processed for 1000 of materials.
Now for some materials its showing discrepancy error in Zreport eventhough the SAP system got updated on stocks throu IDOC from external system. ( Not for all materials only for very few case).
So any experts has come across this kind situation in thier experiance .. how to solve this ??
Note : If any Bacth job is being done in background in SAP after updation the stocks in SAP system throu IDOC. How to find out the batch job in back groud ???
Thanks

hii
Thanks for ur response.
I did't mention in previous message, IDOC got posted in SAP system perfectly without any error . (I have cross checked IDOC).
But after idoc posting in SAP system , the Zreport getting updated , so here is my confusion and doubt.
Where there can be any system in background to update stocks in Zreport from SAP system. Is it possible to find from our side batch job has being processed between standard SAP and Zreport .
There is any way to find ???
Thanks

How to configure SolMan for interfacing with SAP Quality Center

Hello everyone,
Our company has only recently acquired and activated the permanent license for SAP Quality Center by HP. We would like QC to interface with SAP Solution Manager. My question is how to perform the configuration steps to make the interface work with Quality Center? I need to set up the IMG addon SM_QC_AD, which can be found under the transaction SPRO, but I need documentation on which steps to take and why.
I am often referred to SAP note 1059350 and/or the configuration guide, but these only say that I should configure the IMG but not how.
There is a SAP tutor available on the service marketplace, but I think it's rather uninformative.
Can I find better documentation elsewhere?

Hi ,
[Configuration Guide SAP adapter for SAP Quality Center by HP|https://websmp101.sap-ag.de/~sapdownload/011000358700000612662007E/Adapter_Configuration_.pdf] might be useful.
Check [Master guide|https://websmp201.sap-ag.de/~sapdownload/011000358700000612672007E/Adapter_Master_Guide.pdf] also.
Regards
Naveen
Edited by: Naveen kumar Palanichamy on Feb 19, 2009 6:38 AM

SAP Certification for *ABAP System Interfaces with SAP NetWeaver    7.0*

Hi Experts,
I am appearing for SAP Certification in the stream of *ABAP
System Interfaces with SAP NetWeaver    7.0*
so as per the syllabus i required the following material,
BC420,BC425, BC427,BC415,BC417,BIT300,BIT350
BC401,BC402,BC400, BC430,BC490,ADM325,BC425,NET900,
NW001,TESA20,TZCAFG,SM001
so if any body is having the softcopy or any related links of the
above mentioned material
please send to my following mail ID's.
<removed by moderator>
Points Assured.
Regards
Praneeth
Edited by: Jan Stallkamp on Oct 13, 2008 3:30 PM

Don't ask for copyrighted material!
Don't publish your e-mail address!
Don't assure points!
=> this thread will be locked.
Please read the rules of engagement otherwise you will set your account on risk of being deleted.
Best regards,
Jan Stallkamp

SAP Certification for   ABAP System Interfaces with SAP NetWeaver

Hi Experts,
I am appearing for SAP Certification in the stream of *ABAP
System Interfaces with SAP NetWeaver    7.0*
so as per the syllabus i required the following material,
BC420,BC425, BC427,BC415,BC417,BIT300,BIT350
BC401,BC402,BC400, BC430,BC490,ADM325,BC425,NET900,
NW001,TESA20,TZCAFG,SM001
so if any body is having the softcopy or any related links of the
above mentioned material
please send to my following mail ID's.
<removed by moderator> at yahoo dot co in
Points Assured.
Regards
Praneeth
<THREAD LOCKED. Please read the [Rules of Engagement|https://wiki.sdn.sap.com/wiki/display/HOME/RulesofEngagement] to discover why>
Edited by: Mike Pokraka on Oct 14, 2008 1:25 PM

Don't ask for copyrighted material!
Don't publish your e-mail address!
Don't assure points!
=> this thread will be locked.
Please read the rules of engagement otherwise you will set your account on risk of being deleted.
Best regards,
Jan Stallkamp

SAP Certfied Dev Professional - ABAP System Interfaces with SAP Netweaver 7

Hi all,
Has any one here done this certification ?
SAP Certfied Development Professional - ABAP System Interfaces with SAP NetWeaver 7.0
Code - P_ABAP_SI_70
If yes, how has been the value add for you post this certification ?
Regards,
Nikhil.

Hi Nikhil,
I have not appeared for it but am sure that SAP's professional certification has very much value in the market. The professional level exam not only captures your knowledge but it shows the practical experience as well.
Regards,
Subhash

SAP certified professional - ABAP system interfaces with SAP netweaver 7.0

Hi,
I have one and half years experience in ABAP. I want to do "SAP CERTIFIED DEVELOPMENT PROFESSIONAL - ABAP SYSTEM INTERFACES WITH SAP NETWEAVER 7.0".
I am currently in U.S and would like to do the certification here. Whom do I need to contact and what are the documents I need to furnish. Please throw some light on the process.
Thanks,
Poonam.

Dear Poonam,
the "Professional"-Certification is very very hard - during my last Certifcation Exam, all candidates with the Pro-Exam failed (I was so glad I chose the normal certification...)
Here's how to book your exam:
Go to [http://www.sap.com/services/education/certification/index.epx|http://www.sap.com/services/education/certification/index.epx] and follow the instructions ("visit the local SAP Education Web site for the country").
Figure out the exam code for your certification. Example: For the US, there is a downloadable list (PDF) of exams available, called "list of the available certification exams".
Schedule the exam according to the rules of your region - here is the link for the US:
[http://www.sap.com/usa/services/education/certification/exam.epx|http://www.sap.com/usa/services/education/certification/exam.epx]
Regards,
Klaus

SAP CERTIFIED DEVELOPMENT PROFESSIONAL - ABAP SYSTEM INTERFACES WITH SAP

Hello Experts
I am Atush Rohan, I have done my "SAP Certified Development Associate - ABAP with SAP NetWeaver 7.0" on 3rd April 2009.
I want to appear for "SAP Certified Development Professional - ABAP System Interfaces with SAP NetWeaver 7.0". I have about 3 and half years or experience in SAP ABAP. And I plan to give this certificate exam in the coming 6 months.
Could you please tell me how i apply for this exam, and whether SAP provides the certificate material for the exam "P_ABAP_SI_70". Waiting for a positive reply.
Regards
Atush Rohan
Edited by: Atush Rohan on Jul 30, 2009 1:21 PM

hi,
actually you can find your sid on your certificate itself ... your sid will start with SXX .. ok now along with this you will receive an envelope in which there would be an letter where detalis regarding your sid and password for login access in sap market place will be stated... so you can login with that in server market place.... usually you get this along with the certificate and is being provided by the centres authority... now if you have not received it so you need to contact your centre and tell them to give it to you... if they dont barged then you can ask them for the concern guy's email .... this guy is the one who receives all the documents relating with your certificate .. now this guy is someone from sap labs banglore ... also if you have not received your id card so you can mail him or tell your centre authority in that case now usually the centre guys take the matters lightly ...
ok and as far as your certification exams goes i did search the pearson website they really dont have that professional certification for the abap guys but they do have one for functionals and some other....
ok now you need to approach yout nearest certification centre in that case and simply ask them that you need to appear for level 2 certification also you can contact the sap labs banglore in that case but i know that they are not responding .....
so in that matter you tell your centre that you need to schedule the certification they will charge you the certification amount and then will schedule the date..... yes they can do that.
hope this will surely help you!!!
thanks & regards,
Punit Raval.

Interface to SAP Financials for Public Sector

Hi Team
We have a request for interface of SAP CTE to SAP Financials for "Public Sector". Could you let us know if you have completed any such implementation and the additional integration effort needed, if any.
Regards
Sunder

Hi Sunder,
I am not aware of any such project. Technically this might be possible, but I would expect that a public sector company has additional requirements compared to others, like concurrent employment, funds management integration, etc. Without knowing the details I would assume a lot of potential issues in such a project.
Best regards, Reinhard

BC-CTS interface for SAP on IBM i?

I have read about the Technology - Change and Transport System Interface (BC-CTS)
https://www.sdn.sap.com/irj/sdn?rid=/webcontent/uuid/3a83de71-0501-0010-e490-b85cf78809d7 [original link is broken]
This is the interface that SAP provides to third-party SCM vendors to enable them to manage SAP transports and patches.
Can anyone tell me if the BC-CTS solution is available for SAP running on the IBM i?

Hello
BC-CTS is an integral part of SAP Basis. It is available on all SAP systems helps you to organize development projects in the ABAP Workbench and in Customizing, and then transport the changes between the SAP Systems in your system landscape.
Your platform, IBMi, makes no difference here.
I've pasted a link for your review
http://help.sap.com/saphelp_NW04/helpdata/en/44/b4a0137acc11d1899e0000e829fbbd/content.htm
Regards
Ken

Interface to SAP TEM

Similar Messages

Maybe you are looking for