Interface update in heavy processing

In heavy processing, interface contents (textbox , progress bar) can not update (being neglected??)
is there any method to force it to get update??
thx for your time in advance.

Interesting enough I just finished adding a progressbar to a script I'm in the works on right now and I got it to work without using update() at all.
I'm using CS5.5, not sure if that's why or not, but what I did for this one was...
var mainRes ="group {orientation:'row', alignment:['fill','fill'], alignChildren:['fill','fill'],\
                                                            columnOne: Group{orientation:'column', alignment:['left','top'],\
     keyTransPB: Progressbar{minvalue:0, maxvalue:100, alignment:['fill','top']},\
pal.grp = pal.add(mainRes);
In a function way later in the script I have a simple for() loop that also contains...
pal.grp.columnOne.keyTransPB.value++;
and it seems to automatically update the gui without a problem. Maybe try calling your progress bar with it's full path instead of the variable name and see if that works. It might have something to do with functions and variables that declared outside of the function. Not sure if any of that made sense.

Similar Messages

  • Updating an Integration Process in Builder after making a change in Design

    Hi,
    I have a BPM defined as an Integration Process in Designer. I transferred the Integration Process from Repository to the Builder.
    Now I have updated my BPM Process in Designer/Repository but the "new" outbound and inbound interfaces do not seem to show up in the Builder.
    If I create a new integration process and point it to the BPM process then it shows the new changes but how do I update the existing Integration Process in the Builder to show the "new" outbound and inbound interfaces?
    Thanks
    Ashish

    I am on SP11 and this functionality of Updating Changes to BPM in ID is not there.
    Deleting the whole process and then adding it all over again is a potential risk as I might lost my config. I guess that is my only choice at this time.
    Thanks all for your help
    Ashish

  • Synchronus updation and synchrunus processing

    What is synchronus updation and synchronus processing?why bdc is not stopped when error occurs in bdc session or call transaction method during execution?

    Hi,
    synchronise update means transfer the data from internal table to application server record by record.
    synchronise process means transfer the data from application server to data base table record by record.
    but in asynchronise update or process the records at a time.

  • FI/CO interface :Update call without successfull check

    Hi everyone ,
    Please help on this issue ,the issue is when we are trying create JV (J1IH) and J1IS and try to save it
    we are getting error message as
    " FI/CO interface :Update call without successfull check"
    Regards
    PD

    Hi,
    Please check if this links helps you.This has helped us earlier.
    FI/CO interface: Update call without successful check Message No.RW100
    Let us know.
    Regards,
    SB

  • Error "FI/CO interface:Update call without successful check Messageno.BW100

    Hi,
    When we doing J1IIN, the system is giving below error
    Error "FI/CO interface: Update call without successful check Message no.BW100"  
    I have checked in GL master all are unticked in post automatically.
    But still error is same.
    the above is getting only one plant. in other plant its working fine.
    kindly help me to solve this issue.
    thanks in advacne,
    preethi

    Dear,
    This is most common error you get and we are not able to understand what is the error. SAP Store error in internal table "XMSEG"
    Follow below steps:
    1. Enable Debugging
    2. Put Breakpoints at Function Module "Messages_count"
    3. There is a internal Table XMESG which store the reason of error..
    The most common reason for the error i have seen is Business Area..Profit Center....CO PA issue..
    Hope it helps!!
    Br,Vivek

  • Problem in updating the GR processing time using BAPI 'BAPI_SAG_CHANGE'

    Hi,
    I am using the BAPI 'BAPI_SAG_CHANGE' for uopdating the GR processing time(BAPIMEOUTITEM-GR_PR_TIME) of the scheduling agreements.
    Issue: when there is no value maintained for GR processing time for a particular scheduling agreemnet the BAPI updates the GR processing time successfully but when there is some value already existing for a particular scheculing agreement then the BAPI does not update this field eventhough the return parameter shows the message 'successfully updated'.   
    Can somebody suggest what could be the reason.
    OR
    Is there any other way/FM to update the scheduling agreements.  
    Thanks,
    Ravindra

    This appears to be old-style BAPI, with ....X tables.  Did you populate the field in the X version of the outitem for the column(s) to be changed?  Did you call the COMMIT bapi after the update?

  • J1iin Excise Invoice Cancellation - FI/CO Interface: Update call without

    Dear All,
    I am facing a problem in canceling the Excise Invoice as it is giving an error that FI/CO Interface: Update call without successful check.
    I have maintained the Cancellation Excise Invoice Type CEIV, and also assign respective GL accounts.
    So kindly help on this issue.
    Thanks in Advance
    Gopal

    Hi,
    You can go through this Snote 1594064.Also just check the G/L accounts which you have assigned.
    The problem could be most probably with the G/L accounts.
    Regards,
    Saju.S

  • How to Update the Final Process Date in Termiantion Screen Oracle HRMS

    Hi Gurus,
    I have a requirement where i need to update the Final Process Date. is there any standard api to update the final process date. i know there is a update to update the termination details like actual termination date,last standard process but how about final process date.
    Eg : For one assignment the final process date is 31-March-2013 and as of now he is a exemployee in system as he was terminated on 31-DEC-2012. now i want to prepone the final process date to 31-JAN-2012.
    any replies on this is highly appreciable.
    Thanks in advance.

    I would reverse the termination then terminate the employee with the right FPD.
    hr_ex_employee_api.reverse_terminate_employee
    hr_ex_employee_api.actual_termination_emp
    hr_ex_employee_api.final_process_emp
    Maybe also the below might work:
    hr_periods_of_service_api.update_pds_details
    Please note that there should be no payroll result in your case after January payroll.
    On a side note, you can also termiante employee without setting the FPD, and then put it only when approved by the business - in this way wou can avoid the prepone.

  • HT3946 How do I ask Apple to update Aperture to process Olympus EM-5 Raw Files

    sdff
    How do I ask Apple to update Aperture to process Olympus EM-5 Raw Files

    Use this link:
    http://www.apple.com/feedback/aperture.html

  • Worst Interface update ever

    First time I've ever felt that I needed to complain on the interface update in 10 years of using skype. I haven't found anyone on my contact list that likes this change. I wouldn't have mind so much as I simply reverted back to an olderversion and turned off the auto update but I discovered the older versions are being retired so I'm displeased. Please allow the old version to stay on or allow us to change the interface of the new version because its not up to scratch. 

    Uninstall the currently installed version and install the previous 6.21.0.104 version:
    http://download.skype.com/msi/SkypeSetup_6.21.0.104.msi

  • Inbound interface with multiple IDOC processing

    Hi,
    I have to create an inbound interface which has to be triggered only when a batch job is completed in the middleware. The batch job will create 2000 records and 1 IDOC for each record. I have to get all the 2000 IDOCs and then process them together. I have to manipulate the data in these 2000 IDOCs and update them in a SAP table.
    Please let me know how do I proceed with this.
    Should I go with a custom func module or a custom program?
    Thanks,
    Abhishek

    Hi,
    Custom function module with standard parameters : For details refer to the topic Implementing Inbound Processing on page 85 of the
    [ALE Programming Guide|http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCMIDALEPRO/BCMIDALEPRO.pdf]
    regards,
    Advait

  • Color Guide minor interface update

    I found a really minor but disrupting and inconsistent glitch in the Color Guide panel.
    Here is the help file excerpt and read it carefully (Illustrator Help | Color groups (harmonies))
    Show Tints/Shades Adds black to variations on the left and white to variations on the right
    Show Warm/Cool Adds red to variations on the left and blue to variations on the right
    Show Vivid/Muted Decreases the saturation toward gray in variations on the left and increases saturation toward gray in variations on the right
    Where is the issue:
    For the first two variations (Tints/Shades and Warm/Cool), the Tints and the Warm are consistent with the interface controls in the panel. Tint precedes Shades and it is on the left side of the panel while Shades is on the right part of the panel. This is also correct with the help file as it explains color variations, adding black or red to the base color.
    However, for the Vivid/Muted, the label in the panel's context menu is the other way around. Depicting the interface it should be: Muted/Vivid to fully reflect the layout of the interface controls in the panel OR it would be even better to flip the palette and show vivid colors on the left as the base color is also on the left.
    Here are the screenshots:

    Unfortunately, the old 2500s (and to a certain extent the 6416s) are maxed out due to memory and processing capabilities.  Verizon no longer even offers the 2500 and this is the last update that model will able to support.
    Your only "option" (and I use that term loosely as it is difficult to get equipment upgraded) is to update your equipment.  This means going to an HD STB to replace the 2500s which more than likely will incur additional expense (unless you are fortunate enough to live in the NY metro area where they charge the same for an SD or HD box).  The DVR would have to be updated to a 7xxx series Motorola or the new Cisco box (again depends on location as to which is being used).
    If a forum member gives an answer you like, give them the Kudos they deserve. If a member gives you the answer to your question, mark the answer as Accepted Solution so others can see the solution to the problem.

  • Updating an existing process chains created in 3.5 upgraded to 7.0

    I added DTP's to my process chain, see below process.
    1)  Load Inventory data to PSA (R3 to BI)
    2)  Run ODS DTP
    3)  Activate ODS
    4A)  Run DTP to Cube (If I add this, it works, but the Process Chain shows warning, must have Further processing before DTP to Cube.) Is a warning okay?
    4B)  Run Further Processing (Data Store object, ODS_BF).  The Process chain check shows no warning, no error.  But, when the process chain is executed, this last process executes DTP to the cube and also executes the Info Package from BI to BW (8ODS).  We are not using the Info Package of BI to BW at this time, we did not migrate this info package.
    Please help me understand how this should work.
    Thanks,
    Maximina Barry

    Warning is okay but its no harm to have " Further Processing " in ur chain.
    1. Start
    2. Execute Infopackage ( loads till psa )
    3.Execute DTP ( to load DSO frm PSA )
    4.Activate DSO
    5.Further Processing
    6.Delete Indexes for Cube
    7.Execute DTP ( to load Cube frm DSO )
    8.Create Indexes for Cube
    Infopackages n DTPs shud all be delta in update type.
    <b>Delete n Creating Indexes if preffered for performance.</b>
    Also look at : Further Processing Type In Process Chain

  • How to update a deployed process

    Hi,
    What's the proper way to update a process already deployed to weblogic server?
    Here's the situation: I've previously deployed my application to the weblogic server, but then I modified the process by adding an additional human task to the start of the process. I deploy it with the same deploy settings as before, and I expect that when I initiate the process, the first task in the worklist will be the new human task I created. But when I tested it, it still shows the old first task. I tried undeploying the old composite first, then redeploying, still same problem.
    I thought I might need to increment the version id, so I changed the deployment to set the composite version to "1.0.1" but this time the deployment failed with the error that the unique constraint on SOAINFRA.BPM_CUBE_GLOBALCREATETASK_PK was violated (the PK on this table is PROCESSID)
    Any idea how I should go about this?
    Thanks!

    Hi,
    we have the same problem actually.
    The life cycle of the complete workflow is over one year.
    (We are using subprocess, call them dynamicly... but when processes is waiting a notification, that is not a solution!)
    --> Actually we use the API of the workflow to fork processes (with an option that use the new version of definition), "retry" activities in the new process on the same "position" as in the "old process" (Note: That's not always possible - if activity renammed or deleted by example --> Go back to previous correct activity).
    That is working fine... for 85% of our cases.
    Our actual problem is that some of our process use inter process synchronisation. To solve that, we need the execution sequence of the old activities.
    :-( Actually whe can't retrieve the "correct execution sequence" of the activities.
    If some of you knows how to retrieve the order of execution order of the activities, I will help us a lot.
    (The problem is that there is a begin date for that, but precision is "second"... not enough precise... should be at least a milli second).
    --> We are trying to find out the execution sequence by analysing the process definition... But it seems that it will be complicated and long to program.
    Any help is welcome.
    Stephane

  • G/L accounts updation  in subcontracting process

    Hi,
    i request you provide details of G/L accounts while ;1) updation while we supply materials to vendor
    2) while we recieve the finshed product.3) And while settlement to vendor.
    Thanks & Regards,
    Ramesh kumar.

    Hi,
    If Material has Price Control as "V" (MAP)
    (BSX) Stock A/c of Assembly - Dr
    (BSV) Change in Subcon Stock - Cr
    (FRL) Subcontracting Charges - Dr
    (WRX) GR/IR Clearing A/c - Cr
    (BSX) Stock A/c of Components - Cr
    (GBB-VBO) Consumption A/c of Components - Dr
    If Material has Price Control as "S" (Std. Price)
    If Material is having Price Control as "S" then Price Difference A/c will also in picture.
    This depends on configuration; SPRO > MM > Inventory Management and Physical Inventory > Goods Receipt > Price Differences for Subcontract Orders at Goods Receipt
    Price Differences for Subcontract Orders at Goods Receipt
    In this step, you configure for each valuation area whether price differences are generated for a Subcontract order at the time of a goods receipt if the manufactured material is managed at standard price and the standard price varies from the receipt value (externally performed service + value of components + delivery costs).
    Example
    Finished product: $400 (value at standard price)
    Subcontract order:
    o Ext. service : $250
    o Components : $100
    Posting schema without price differences:
    Stock account FERT : 400 +
    Stock change : 400 -
    GR/IR clearing acct : 250 -
    External service acct : 250 +
    Compon. stock account : 100 -
    Consumption account : 100 +
    Posting schema with price differences:
    Stock account FERT : 400 +
    Stock change : 350 -
    Price difference : 50 -
    GR/IR clearing acct : 250 -
    External service acct : 250 +
    Compon. stock account : 100 -
    Consumption account : 100 +
    And cost center is mandatory for subcontracting process
    the accounts for the BSX FRL and GBB-VOB needs the cost elements
    Sometimes if you have freight the key FRN also gets used.
    Edited by: venkatesh kumar on May 11, 2010 12:46 PM

Maybe you are looking for