Interface with external email system

Currently, Oracle Customer Relationship Management Release 3i can only allow internet messaging. I have 2 queries:
1. How does internet messaging works? Where do you configure it?
2. Is it possible to link the messaging system to Lotus Notes?
null

Hi,
The entire architecture of messaging in Oracle is built on Oracle Worklfow.
The messages are not only internet enabled messaging but also integrate with any MAPI compliant messaging system, UNIX Send Mail and Oracle Mail. Thus Oracle Worklfow can be integrated with Lotus Notes also to provide the notifications which are generated in Oracle.
As far as integrating Lotus Notes with Oracle WOrkflow is concerned , suggest u get in touch with Mr Kirit Goyal at [email protected] who has worked in this area.
null

Similar Messages

Creation of Server Proxy for Message interface with External Defination

Dear All,
I am getting a problem while generating a server proxy for the inbound interface . The request message used in the inbound interface is a external definition which is uploaded using a XSD file. The XSD file was supplied by a third party which is having very high complex strucuture and used lot of abstract data types in the design. When i tried to generate the proxy in the R/3 system (Transaction SPROXY) for the inbound interface i am getting following error.
Interface uses external and internal message definitions
Message no. SPRX122 *
Diagnosis
In a message interface you can use messages from different sources:
Message types and fault message types edited in the Enterprise Services Repository
Messages imported into the Enterprise Services Repository (external definitions, RFC, IDoc)
In the current message interface, message types from different sources have been used. Since messages from these different sources must be handled differently during proxy generation, such a mixture of messages within a message interface is not possible.
System Response
The interface cannot be generated.
Procedure
Change the interface definition accordingly in the Enterprise Services Repository.
Please guide me, how to generate the proxy for the interface with external defination message. I could nt geneate manullay, because it is having very high complexity and its a big structure.
Is there is any way to generate the proxy for interface with external definition
Regards
Vijayanand

Hi,
i. Import your message schemas from external definitions, or RFCs or IDocs from SAP systems. These definitions already contain data types.
ii. Create a message interface and reference the messages of the external definition, or the RFC or IDoc message.
Check this, it may help you
http://help.sap.com/saphelp_nw04/helpdata/en/3f/01623c4f69b712e10000000a114084/content.htm
REgards
Seshagiri

How to integrate iPayment module with external Payment System

Hi,
I have a requirement where I need to integrate Oracle iPayments in Release 11i with external payment system which is different than standard payment system given by Oracle,so can anybody please guide me on the steps which need to be performed to integrate Oracle iPayment with external payment system for credit card transaction processing.
I want to implement both the models gateway payment model and payment processor model.
It will be really helpful if anybody can provide me some sample code for the servlet to be written and the configuration steps asap.
Thanks in advance.
Thanks,
Devendra
Edited by: Devendra Pratap Singh on Mar 23, 2009 12:02 PM
Edited by: Devendra Pratap Singh on Mar 24, 2009 4:03 PM
Edited by: Devendra Pratap Singh on Mar 24, 2009 9:05 PM

Devendra,
Review the following notes:
Note: 333676.1 - Oracle iPayment White Paper
https://metalink2.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=333676.1
Note: 135745.1 - iPayment API and Interface FAQ
https://metalink2.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=135745.1
Regards,
Hussein

SCOT configuration for internal & external email system in EP.

Hi,
I want to add SCOT configuration for internal & external email system in SAP EP 7.0 ?
What all steps I need to do ? any good documents on this ?

Hi Haider,
I have read the link you have given me to configure SCOT. I have 3 doubt plzz clarify.
Doubt No. 1:
In that link its mentioned that I have to add 2 profile parameter in the transaction RZ10 namely icm/server_port_<>* and is/SMTP/virt_host_<>*
My question is Can I put any value which i like in place of * like can I add either icm/server_port_2 OR icm/server_port_3 OR icm/server_port_4 in icm parameter AND ALSO
Can I put any value which i like in place of * in is/SMTP/virt parameter like can I add either is/SMTP/virt_host_0 OR is/SMTP/virt_host_1 OR is/SMTP/virt_host_2 .
Doubt No. 2:
What port value I have to put in the profile parameter    icm/server_port_2 in RZ10. Can I put any port value ? and automatically that port will work? say suppose I addded this profile parameter in RZ10
icm/server_port_2 = PROT=SMTP,PORT=25000,TIMEOUT=180          so automatically 25000 port will work ? or will it give error?
Doubt No. 3:
When I go to SMICM transaction and go to services , I get the following:
No. Log         Service name/port     Host name           Keep Alive    Proc TimeOut   Active
1     HTTP               8000                  epv.sopm.com           30                     60               Yes
2     SMTP               0                       epv.sopm.com            30                    60                Yes
3     HTTPS             8001                 epv.sopm.com            30                    180               Yes
This means that HTTP port is 8000,   HTTPS port is 8001. My question is why in SMTP its showing 0, why no port is shown?
I have not added any profile parameter like icm/server_port_2 = PROT=SMTP,PORT=25000,TIMEOUT=180     for SMTP in RZ10 as of now.
Is this the reason for this ?

CUP Future Integration with External Training System

Are there any plans to allow CUP to integrate with external training systems. We have a need for CUP to integrate with an external training system to obtain course completion information which would then be used in the approval process for requests associated with adding or updating roles. Thanks in advance.

I don't know of any specific enhancements for that requirement but I would raise this directly with SAP to check!
I'm sure you could use a work around by using qualification records to trigger the CUP webservices of a certain request type and generate a workflow path for that specific approval mechanism.
Cheers, Simon

COMMUNICATION ERROR WITH EXTERNAL TAXATION SYSTEM - VERTEX_MS0018

When I copied US company code 3000 to my org using USD as currency code with a a view to simulate US scenarios it threw an error as under.
The error occurred when I was trying to fill in the address tab after copying the company code.
<b>
COMMUNICATION ERROR WITH EXTERNAL TAXATION SYSTEM - VERTEX_MS0018</b>.
Thank you and regards,
Ram

Hi Ram Shiva,
Deactivate External tax
Path:SPRO>Financial Accounting>Financial Accounting Global Settings>Tax on Sales/Purchases>Basic Settings>External Tax Calculation>Activate External Tax Calculation
Hope this will solve
Best Regards
Ashish Jain

DISTRIBUTION LIST WITH EXTERNAL EMAIL SEND FROM OUTSIDE

Hello to all,
I'm new in the foruum.
i have the following problem with Distribution Lists.
I have create one Distribution List which include email address from our company and external email address.
When i send from inside all works fine.
But when i send from outside the email received from inside users(email addresses of my domain) but never received from outside email addresses.
How can resolve this issue?
Pls help

Read carefully my question.
i have change this setting when create the group.But my problem isn't that users from outside can't send to distribution list. The problem is that in my distribution list i have email addresses from my company (@domain.com) and external email addresses (@gmail.com,@yahoo.com).
When a user from inside send to the Distribution List all works fine. When a user from outside send to the Distribution List, users from my company(@domain.com) which include in the Distribution List receive the email but user with external email addresses(@gmail.com,@yahoo.com)
didn't receive the email.

Workflow integration with external DMS system

Hi,
What integration/control transfer possibilities exist between SAP Workflow and an external document management system (e.g. Hummingbird)? Would some sort of interface be necessary for the integration and what would the level of effort be more or less?
This is quite urgent and I would greatly appreciate your input.
Regards
Liza-Marie

Hi Liza-Marie,
you can work at different levels:
1) Integration of documents use in the SAP workflow can be stored in external DMS and linked to SAP transactions through SAP Archivelink; you'll probably need a Hummingbird interface certified archivelink
2) If you want to integrate your SAP workflow with the workflow of the DMS (if any), you can practice as follows:
a) From you DMS, you can raise events in the SAP system on which your SAP workflow would react (to start or resume) by making use of standard RFCs such as SWE_EVENT_CREATE; eventually you can expose it as web service, which will simplify the call
b) From SAP worfklow, you can send mails, call external system commands (more rarely used) or call web services that would allow you external DMS to be triggered on
Details on all these techniques would be too huge to be described in a post, but this gives you an overview on how SAP Workflow can interact with external solutions.
In summary to your question:
1) Interface required YES - ARCHIVELINK CERTIFIED in case you want to store documents in external DSM that need to be connected to your SAP transactions
2) Level of effort is depending on your scenario
Rgds,
Karim

Receiver Mail Adapter with external Email-Provider

Hi everyone,
I have implemendet an Scenario with a receiver Mail Adapter. With using the SAP-Mail-Server it works fine.
Now I want to use an external Email Provider like GMX or yahoo. But the Parameter e.g. smtp://mail.gmx.net does not work.
Is this generally with an external Email Provider possible?
Thanks in advice
Christoph

Hi,
of course it is, but:
your XI has to see the external provider = opened ports
Regards,
michal

EREC: Interfaces with Third Party Systems

Hello Experts,
Does anybody can provide me a list of third party systems with seamless interface with E-Recruiting (SAP Partner) for the following purposes below:
Resume Parsing
Background Check
Drug Screening
Posting in Multiple Job Boards
Thanks in advance!
Sivani

Resume mirror is used for resume parsing.
Regards,
Bharat

Controling a user interface with extern DLL

Hi,
I am currently developing an application that is based on a graphical interface. I divide my code into multiple DLLs. By going this route, I met several problems. I want to know some facts:
1 - from the DLL can I assign values to textbox, read listbox of the GUI:GetCtrlVal (panelHandle, PANEL_TEXTBOX, val); (the GUI is integrating in the project who call the DLL)
2 - I use global variables "extern int" in my files. h and my functions. How do I change this variable declaration when I migrate to the DLL.
If you have any exemple describing how can i control a GUI with extern DLL.
Thanks

Hey Fishingman,
It looks like this post is very similar to your other post on Application Architecture. If this is the case, let's continue this discussion on this thread so that it is easier to follow for anyone else who may be keeping up with this.
To expand on my original response a little though - if you are just looking to be able to modify the user interface in a dll then take a look at this link. It explains how to set up dll function calls to modify a user interface. Again, I wouldn't suggest building your entire GUI through different dlls but it is definitely possible to modify it within a dll.
Regards,
Trey C.

Interface with external system

Hello Experts,
The query i am posting is very naive and mite seem vague to you but I am doing it for a sure shot methodological approach. My client have an vendor system that they want to interface. All the information I have is
1> I will get the XML schema frm the guys of that company.
2> XI is installed in my company.
Can you tell me wat all things i need to configure and how can i go about achieving this?
thanks and please advise me,
Mehta

Hi Gaurav,
you will have to provide more details like who is your sender, who is your receiver etc....
i would recommend that you go through the SAP help documentation and follow the pipeline steps.
http://help.sap.com/saphelp_nw04/helpdata/en/14/80243b4a66ae0ce10000000a11402f/frameset.htm
You will have to perform the basic steps to get your thing (XSD) into XI.
1. In the Integration Builder - Integration Repository; You take your XSD provided by the vendor and create an interface out of it. This depends whether your vendor is sending (Outbound Interface) or receiving (Inbound Interface) the data.
2. Then add this interface to your service in the configuration (Integration Directory).

ABAP Interface with LU6.2 system

HI All.
I have requirment that i need to connect external system SNA-LU6.2 , if anyone as done please help me
Thanking you
Sridhar

Hi,
We had a case in where we had also to use this protocol. My collueges were able to make the connection. Can you shortly subscribe your business needs?
Chris.

Generating Proxy in SAP620 for message interfaces with External definitions

Hi,
We need to generate ABAP proxy in SAP 6.20 for a message interface(XI 3.0) based on WSDL definition.As it is not possible to generate the proxies for WSDL in SAP 620,we installed APPINT620(level 5).Still we are unable to generate the proxy.Any ideas to solve this issue?
Thanks in millions,
S.Banukumar

Hi,
We have done a workaround to define the SAP(inbound/outbound) message interfaces manually as a copy of external definition structures.Based on the manually defined message interfaces,we could generate the proxy.By this way we could solve the problem.
Thanks,
S.Banukumar

Cross-docking with external WM system

Hello Gurus,
We are trying to implement cross docking but we donu2019t have wm on the SAP ERP. We would like to know if this is possible. And this is possible, how can we manage this scenario for example: A delivery from PLANT A to a client that uses PLANT B as cross-docking plant. When the shipment leaves PLANT A what movement we need to do. When the materials of the delivery are received on PLANT B what movement should we do. When the shipment leaves PLANT B we make the goods issue?
Is this correct? If this is correct you have to change the plant of the sales order and delivery from PLANT A to PLANT B.
Best regards,
Tiago Magalhães

Managed by process not by any configuration.

Interface with external email system

Similar Messages

Maybe you are looking for