Interface with hardware through USB,not NI hardware

Hi All,
I wish to interface my hardware through USB using LabView. However,my hardware is not from National Instruments and I wish to know whether LabView can still interface with it. I need it urgently for my project. Hope someone can help. Thanks a lot in advance.
Cheers =)

Hi,I think I only have the nxnusb.ini & nxnusb.dll file. I'm not very sure what is the usage for it. I've asked the vendor about the interfacing. He said its possible but its only for experienced programmer. Haha,well,i'm not so sure what he means but thats all he suggested. So I hope someone can help me with this device interface. Thanks a lot.
Attachments:
nxnusb.ini ‏1 KB

Similar Messages

  • Interface Midi Motu Fastlane USB not functioning under Snow Leopard?

    Hi all
    I have 3 external midi instruments I want to set up with logic separately.
    As my MOTU 828MK3 audio interface, (which is connected via a Firewire cable), only has one midi port and I don’t want to use the MIDI through option (‘cos I want to have the 16 channels of each instrument simultaneously available), I purchased a Motu Fastlane Midi 2 in, 2 out, USB interface.
    The thing doesn’t work – the Fastlane gadget does not send or receive any Midi signal, although recognised by the Midi Setup on Core Midi. And the thing should be only plug & play.
    At first I thought it could be some drivers’ problem, but if the Motu 828 MK3 works, Fastlane USB should function as well, I think.
    I tried to update the drivers from the Motu site, but Snow Leopard did not allow it.
    Does anyone have a clue?
    Thank you

    Wow, I'm not crazy after all. I recently purchased Logic Express 9 and have not been able to get my external MIDI gear working. I too have a Fastlane. I too updated the driver that Motu says works with Snow Leopard. And I too can't get it working. However, the input works. I am able to record MIDI data to an external track and to a soft synth track. The soft synth track plays back fine but I cannot, for the life of me, get it to trigger my external synths. The external track has MIDI data in it but it will not play. I do think it is a driver problem. Also I do not see the green port lights blinking indicating MIDI data is not being received by the Fastlane. Here's my question. What is a good MIDI interface that will work with this OS and LE9? How about the MOTU Micro Light 5x5? I'm afraid to make the purchase. Is all of MOTU's interfaces having this problem?

  • 3 x 720p webcams and audio interface multi capture through usb??

    software is not the problem for me. i am using evocam at the moment. but my problem is i want to run 3 x 720p webcams and an audio interface at once. i can do this if the quality is low but when i increase the quality 1 webcam drops out...
    i am using a belkin usb hub which runs 2 webcams and an audio interface. the other usb port has the 3rd webcam.
    will a powered usb hub help me here?
    does anyone know any other suggestions on how to run these 3 usb webcams (@max quality) and an audio interface on a MBP(mid 2010)?? (running 10.7.5)
    can i do any mods to the MBP at all. i have max the ram @ 8gb....
    your help would be great appreciated...

    can i plug a USB webcam into an ethernet port? is there some kind of convertor????

  • Preconditional Loop - with Roles through context not working

    I have created a Pre conditional loop block with action getting user id from output parameters. I am assigning the same action to the next user based on Input_parameters->User using block's Roles tab to the action.
    But the user is not assigned to the action , instead the action is getting repeated in the loop for the old user.
    action should execute like User1, User2, User3.. but the action is assigned to User1 onlly all the time.
    I have grouped Output_parameters and Input_Parameters of the same action to get the users passed from output to input correctly.
    Please let me know if I need to do any configuration in GP for this action/block to accept the Roles to context?
    I am using the blog for example:/people/dipankar.saha3/blog/2007/05/31/how-to-create-dynamic-approval-process-using-conditional-loop-block-in-guided-procedure

    Try this,
    var myDocument = app.activeDocument;
    for (a=1; a < myDocument.allParagraphStyles.length; a++) {
        if(myDocument.allParagraphStyles[a].appliedFont.fontFamily == "Times New Roman (OTF)") {alert()}
    for (b=1; b < myDocument.allCharacterStyles.length; b++) {
        if(myDocument.allCharacterStyles[b].appliedFont.fontFamily == "Times New Roman (OTF)") {alert()}
    Regards,
    Chinna

  • Interface with no mapping could not be activated

    Hello,
    i want to transform an invoic01 Idoc into a xml-file. Ther is no format transformation, I only want to get the xml file.
    With XI 2.0 I only had to define no message program. Now I wanted to do the same in XI 3.0 but I get an error message that says that there is no mapping-program. I don't want to have one.
    What do I have to do?
    TIA
    Volker

    Hi,
    I found out, how to do it.
    Don't define an interfacemapping in your repository.
    In your directory define a interface determination without interfacemapping.
    You can use a simple string as datatype in your repository, in my case, for the inbound messageinterface.
    Thanks for your help
    Volker

  • Problem with K7T266 pro, usb not working corectly!

    Have a problem here.
    My MOMO racing wheel (USB) stops responding while playing games, but the wheel works fine on my friends comp. When i start a geme, i can play it for 30-60mins, and then it just stops responding, the lights on the wheel dont glow and it seems disconnected, my only help then is to restart my comp.
    And my specs are:
    MSI K7T266 pro
    AMD athlon 1,4Ghz
    Win98SE
    I use the usb ports, that are in my mainboard.
    Please answer if you know about the problem, or if you have expirianced something like that.

    After killing my K7N2G-ILSR, ive had to revert to my backup K7T266 ProR system. While playing UT2K3 I had those freaking random disconnects of the USB which would kill the FPS and get me fragged, after which time it would happily reconnect and work fine. My optical mouse would also disconnect like that.
    I am running XP Home, VIA 4.43. I set the BIOS to read only USB1 (which didnt work). Then I installed the VIA USB filter RC-1 and havent had a disconnect problem for over 24 hours now. Get the usb filter from MSI website and good luck!

  • Can anyone recommend a portable USB 3.0 drive with hardware encryption, compatible with OSX and Windows 7.  I need it for my MacBook Pro 13", 2012, running Mountain Lion

    Can anyone recommend a portable USB 3.0 drive with hardware encryption, compatible with OSX Mountain Lion and Windows 7.  I need it for my MacBook Pro 13”, 2012, running Mountain Lion & Windows 7 Ultimate - BootCamp.  I’ve heard that the Buffalo MiniStation Encryption does not work with OSX, is that true..?  I'd like it to work with both operating systems, using the built in hardware encryption.  Thanks

    This article may help: A flashing question mark appears when you start your Mac.

  • IPod 3g works with usb, not through firewire

    Hello everybody.
    That's a long time the problem happened, but now it gives me a big trouble because I can't change music on my iPod 3G 10go.
    In fact, iPod was recognized through firewire by my iMac G3 until I installed Tiger. But charging is OK. After having installed that great OS, I can interract with iPod only through USB. That's a big problem because there's only USB 1 on iMac G3.
    I've restored iPod, reinstalled it, having too repaired my iMac G3 disk with Disk Utility. But it still doesn't work.
    So here's a resumee of all things I've done :
    -Reinstalled iPod softwae (last version available)
    -It does not work with my new iMac Core2duo, so that's not a problem with one of my two computers.
    -That shouldn't be a problem with firewire cable because charging is OK.
    -That shouldn't be a problem with dock connector because it works fine when I use iPod on Universal Dock with Apple Remote.

    Hi Xavier
    Yes many people seem to be having this problem since installing the new iTunes 7 and ipod software 2.3, however no one seems to know what is the real cause. My 3G iPod was perfect for years, and since last week I have been unable to connect to my Macbook Pro with firewire. However it is fine with USB.
    People keep telling me to restore my ipod to an older software version (older than 2.3), however the 3G ipod is unable to restore using USB, and requests the firewire connection to restore.
    Thus, I connected with USB and restored using iTunes on windows (using bootcamp on my MBP). However now my ipod is Windows formatted, and is having problems importing music in OS X.
    Just wanted to let you know that others are having this problem, and we are waiting for Apple to issue a response/fix/update.

  • HT4060 My I pad 2 is not charging throuh USB Power Adapter but it is chrging from computer through USB (with sign of no charging). Would  you please give any solution for that?

    I have facing problem of charging my I pad through USB power adapter. It is not giving any response when connected to power adapter. When it is connected with USB port of computer it is charging with sign of "not charging" and it takes long time to cahrge. please help me to sove my problem.

    I have no idea why the iPad would not be charging with another power adapter but will charge thought the USB port on your computer. Try rebooting the iPad.
    Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up
    If that doesn't help, I think that the next thing that I would try would be to reset all settings. Settings>General>Reset>Reset all settings. If you do this, all device settings will have to be re-entered and tha does take some time to do.

  • Interfacing of hardware with labview

    can u pls tell me the steps for interfacing a hardware wiht labview........ i mean to say the detailed descrpition....... for ex: interfacing keithley sourcemeter with labview....... pls do give me a detailed steps of interfacing

    Start by downloading the LabVIEW driver, which is available in http://sine.ni.com/apps/utf8/niid_web_display.model_page?p_model_id=7117
    You should also make sure that the VISA driver is installed.  It should have been part of your LabVIEW installation.
    Or a shortcut location from the Keithley website is here:
    http://www.keithley.com/support/data?asset=51950
    Message Edited by Ray.R on 04-11-2010 05:42 PM

  • Computer with Vista not recognizin​g my Pearl 8100 through USB

    Hi my computer will not recognize my Pearl 8100 through USB connection and my computer is a little older so it doesn't have Bluetooth to try that. I've read some of the info from others having similar problems and I have checked my cable which is fine and have tried using a USB slot on the back of my computer rather than a USB hub to no avail. Any other ideas?

    Hi and Welcome to the Forums!
    Here is the list of troubleshooting KB's...hopefully something will be useful:
    KB02640 Troubleshooting USB connections
    KB15486 Top 10 BlackBerry smartphone and BlackBerry Desktop Manager troubleshooting tips
    KB11439 BlackBerry Desktop Software does not detect the BlackBerry smartphone when it is connected
    KB00019 No PIN displayed in BlackBerry Desktop Redirector
    Also, check that you are using only root USB ports...no hubs (sometimes the front-side ports are hubs...use a rear USB port). And make sure to try disabling USB power management in your system configuration (Device Manager).
    Apologies in advance if this is redundant -- there's no way to be sure if you've already seen and tried these.
    Hopefully something there is helpful!
    Cheers!
    Occam's Razor nearly always applies when troubleshooting technology issues!
    If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
    Join our BBM Channels
    BSCF General Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • Troubles with Agilent gpib/usb interface

    I have a problem to use Agilent 82357A gpib/usb interface with NI VISA (os Win98). I have Visa3.0.1. I did all what is written in file niinfo.htm, which containes some advices for running the agilent gpib/usb card with NI software(it is in directory prog. files\agilent\IO Libraries\readme\trouble\) and I also tried most of advices written on the web pages of ni.com. In MAX3 I can only see "miscellaous VISA resources". When I run NIVISAAIC, I can communicate with interface as well as with instrument attached to it. When I close nivisaaic, it returns arror message, that program performed unauthorised operation in module agvisa32.dll. It indicate that trouble is between libraries of NI and Agilent. I tried to install agilent gpib/u
    sb driver in many ways, only SICL, or SICL + agilent visa (secondary, side by side), but nothing works. When I run Getting started wizard in run-programs-national instruments-Ni.488.2, it detects no gpib hardware, even MAX indicates some "miscellaous VISA resources". Is there somebody with experiences how to solve this problem.? Thanks

    1. I have tried method 1 in that KB you have adviced me. I uninstalled Ni-Visa and instaled HP-Visa (is not clear from the KB description, if HP should be primary or secondary, side-by side. I tried both configurations). Of course MAX does not find gpib board in any case. To solve this problem in the KB is written "you must right-click on the control or constant and select "Allow Undefined Names." In this step I stopped, because in the MAX I did not find where this "constant or control" is. I tried to do right-click on "devices and interfaces", but only "Create new..." menu appears. The right-click on anything in the MAX does not open the menu which contains "Allow undefined names". Can you please, specify where this right-click should be done to allow undefined names and to continue with method1 to reach the goal of using LV for data aquisition.
    2. Then I tried method 2 from the KB. I have uninstalled HP-visa; HP-SICL and Ni-Visa3.0 is installed, NiVisaTulip.dll passport is allowed and F5 refresh made. In MAX in the section Devices and Interfaces I can see "? Miscellaneous VISA resources" with "GPIB1::22::Instr" (it is for one device with address 22). Instead of "? Miscellaneous VISA resources" I expected, there will be written something like GPIB1(USB-GPIB). In this point I have few questions.
    a) Is it correct if there is only "? Miscellaneous visa resources"?
    b) If I configure usb/gpib card with Agilent config. utility to SICL name gpibn and visa name gpibn, where n is some integer, MAX shows everytime gpib1. There is only one gpib card installed in the PC, so I expect there will be gpib0 in the MAX.
    Now, when I run nivisaic, I can see gpib interface named gpibn with gpibn::22::instr. I can communicate through this interface to the instrument in the session opened by double-click on the resource. In the Nivisaic there is also another interface marked as unknown-gpibn::intfc and gpibn::servant. I cannot communicate with this interface. When I install HP SICL with HP visa as secondary, side-by-side, this "unknown gpib" disappears. Then nivisaic seems to be OK(but MAX still shows "? miscellaneous visa resources"),the status of each operation in NI Spy is succesfull. I think I did everything required in method 2 of KB but, I cannot perform any data aquisition by LabView. Are there further thinks to do for starting data aquisiton? Thanks for any advices.

  • Can Java be used to communicate with hardware?

    I work with electronics as a hobby, but wish to interface with my electronics so I'm trying to find a programming language that has good API's for hardware communication(most likely through a serial or parallel port).
    Can this be done with Java? I really like java and the fact that it's platform independant.

    I work with electronics as a hobby, but wish to
    interface with my electronics so I'm trying to find a
    programming language that has good API's for hardware
    communication(most likely through a serial or parallel
    port).
    Can this be done with Java? I really like java and the
    fact that it's platform independant.I used the serial communications API, and it's not hard to use. The thing is you loose the platform independence when you use (it has some platform specific things)

  • Wi-Fi driver through USB host interface

    Hi,
    We are trying to develop Wifi driver for Windows CE OS connected to Freescale based i.Mx6 device through USB host interface.
    I am planning to communicate with the Wifi driver through AT commands and so I want to make USB host driver detected 
    as virtual com port (USB serial client driver). What registry settings I need to make to do so.
    Thanks in advance,
    Seeth

    I'm a bit confused. You'll want NDIS to talk to the device, right? Don't you need to make it appear to USB as a network driver, then? The network driver can, of course, use whatever it wants to talk to the hardware (at the USB level), but I don't see how
    creating a COM4: device gets you anywhere.
    You're going to install two drivers, one for the hardware making it look like a serial port, and a second for NDIS interface? You're then going to open the serial port in your NDIS driver (you'll have to detect which of several ports is the right one), and
    implement the NDIS interface by making ReadFile, WriteFile, and DeviceIoControl calls to the serial port driver? Won't that be problematic for network adapter interrupt handling (among other things)?
    Paul T.

  • T43-W7 (new install) Fingerprint Software not interfacing with power-on password

    Went through a remarkably painless upgrade of my old T-43 to W7 yesterday.  After the W7 install, I added the Lenovo Toolkit, and let it load the recommended drivers/updates.  Then to regain use of the fingerprint function, I d/l'd the latest version of CSS, which seemed to install just fine (per upgrade recommendations, I uninstalled the fingerprints/power-on password prior to upgrade).  
    In going through the enrollment process, the only checkboxes that appear above each "finger" are for Windows, not for the power-on password.  The power-on password isenabled and set in BIOS for both the computer and the hard drive (password identical to the Windows User password).  Tried with the Security Chip both Enabled and Disabled, and also tried "Clearing" the security Chip, to no avail. 
    The result so far is that fingerprint login is working great for W7, but no longer works at all for power on, as it did under W2k.  I have an X301 that I upgraded from Vista to W7 on which all of this works perfectly, so I am pretty sure I know what should be possible, but maybe this is beyond the hardware function of W7 with the T43? Am I missing something? 

    Vince69,
    Thank you again for your suggestion.  I tried updating the driver using the package you pointed to, and did not have any luck.  Kept getting "Driver not found", (and include subdirs was checked).  Also tried manually dropping into each subir in the file, and still no luck.
    I came across an entry in http://social.technet.microsoft.com/Forums/en/w7itprohardware/thread/aa965e55-de21-4dd0-93e2-05e6d14... which seems to address the "Unkown Device" issue.  Go about halfway down the page, and the instructions provided by James Norman seemed to work for me--at least it made the error message go away.
    But the original problem of the Fingerprint s/w interfacing with power-on password is still there.  After fixing the device driver problem, I reinstalled Fingerprint Software (I had uninstalled it before fixing the Device Driver issue), and I have the same behavior and selection choices under "Settings" as I had before--none of the settings include anything to do with power-on password.
    Any more suggestions?

Maybe you are looking for