Interface with SQL server

Hi,
I want to get data from SQL server on demand from SAP server and run a report in SAP.
Can anyone help me how to get data from SQL server?
Thanks,
Ashok.

Ashok,
I am not sure how it is done for SQL server, but here is a thread that discussed about a similar requirement with a Access database. Take a look.
SQ02 SAP Query
Regards,
Ravi
Note : Please mark the helpful answers

Similar Messages

  • DI Server with SQL Server 2008

    Hello.
    In the company where I work we develop an application that uses B1WS.
    In the development environment had the following characteristics:
    SAP Business One 2007 SP01, PL 09
    SQL Server 2005 Developer Edition
    Windows XP Professional SP 3
    SAP Business One Web Services 1.0
    At the time we applied to the deploying the SAP Business One version 8.8, but I had a serious problem. The test environment has the following characteristics:
    SQL Server 2008 Enterprise Edition
        SAP Busines One 8.8 * PL 10
    Windows Server 2008
    The problem is that when trying to connect to the DI Server generates the following messages:
    The TAO NT Naming Service has stopped. (WithOut DBUser and DBPassword)
    Unable to access SBO-Common database Login (With DBUser and DBPassword)
    I tested the connection directly to the DI Server disponbile by example in the SDK and it generates the same error. For the SAP interface is connected correctly.
    DI Server allows connect with SQL Server 2008?
    Messagge:
    <DatabaseServer>mv-05910a0046</DatabaseServer>
    <DatabaseName>Prueba</DatabaseName>
    <DatabaseType>dst_MSSQL2008</DatabaseType>
    <DatabaseUsername>sa</DatabaseUsername>
    <DatabasePassword>12345</DatabasePassword>
    <CompanyUsername>manager</CompanyUsername>
    <CompanyPassword>12345</CompanyPassword>
    <Language>ln_English</Language>
    <LicenseServer>mv-05910a0046:30000</LicenseServer>
    Thanks
    Edited by: Andres Naranjo on May 14, 2010 12:47 AM
    Edited by: Andres Naranjo on May 14, 2010 3:56 PM
    Edited by: Andres Naranjo on May 14, 2010 3:58 PM

    Had the same error
    'The TAO NT Naming Service has stopped.'
    Was using the external IP address for the LicenceServer - which is on the same server as SAP DIserver and B1WS.
    I changed to using localhost:30000 and that solved the issue.
    I suspect if I had used the internal IP it would have worked as well (ie the one you get from ipconfig) but as it works I'm not going to test that.
    HTH

  • Dispatcher stopped and not able to connect with sql server

    Hi ,
                       In one of test system disp+work is started and then within no time its stopped.
    I am able to connect with  sql server 2005 database but while starting sap  dispatcher is stopping.
    Here is the log of  dev_wo
    trc file: "dev_w0", trc level: 1, release: "700"
    ACTIVE TRACE LEVEL           1
    ACTIVE TRACE COMPONENTS      all, MJ
    B 
    B Thu Jan 05 07:24:02 2012
    B  create_con (con_name=R/3)
    B  Loading DB library 'C:\usr\sap\DE1\SYS\exe\uc\NTI386\dbmssslib.dll' ...
    B  Library 'C:\usr\sap\DE1\SYS\exe\uc\NTI386\dbmssslib.dll' loaded
    B  Version of 'C:\usr\sap\DE1\SYS\exe\uc\NTI386\dbmssslib.dll' is "700.08", patchlevel (0.72)
    B  New connection 0 created
    M sysno      11
    M sid        DE1
    M systemid   560 (PC with Windows NT)
    M relno      7000
    M patchlevel 0
    M patchno    75
    M intno      20050900
    M make:      multithreaded, Unicode, optimized
    M pid        988
    M
    M  kernel runs with dp version 217000(ext=109000) (@(#) DPLIB-INT-VERSION-217000-UC)
    M  length of sys_adm_ext is 572 bytes
    M  ***LOG Q0Q=> tskh_init, WPStart (Workproc 0 988) [dpxxdisp.c   1299]
    I  MtxInit: 30000 0 0
    M  DpSysAdmExtCreate: ABAP is active
    M  DpSysAdmExtCreate: VMC (JAVA VM in WP) is not active
    M  DpShMCreate: sizeof(wp_adm)          23936     (1408)
    M  DpShMCreate: sizeof(tm_adm)          3994272     (19872)
    M  DpShMCreate: sizeof(wp_ca_adm)          24000     (80)
    M  DpShMCreate: sizeof(appc_ca_adm)     8000     (80)
    M  DpCommTableSize: max/headSize/ftSize/tableSize=500/8/528056/528064
    M  DpShMCreate: sizeof(comm_adm)          528064     (1048)
    M  DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
    M  DpShMCreate: sizeof(file_adm)          0     (72)
    M  DpShMCreate: sizeof(vmc_adm)          0     (1440)
    M  DpShMCreate: sizeof(wall_adm)          (38456/34360/64/184)
    M  DpShMCreate: sizeof(gw_adm)     48
    M  DpShMCreate: SHM_DP_ADM_KEY          (addr: 07F90040, size: 4659000)
    M  DpShMCreate: allocated sys_adm at 07F90040
    M  DpShMCreate: allocated wp_adm at 07F91E40
    M  DpShMCreate: allocated tm_adm_list at 07F97BC0
    M  DpShMCreate: allocated tm_adm at 07F97BF0
    M  DpShMCreate: allocated wp_ca_adm at 08366E90
    M  DpShMCreate: allocated appc_ca_adm at 0836CC50
    M  DpShMCreate: allocated comm_adm at 0836EB90
    M  DpShMCreate: system runs without file table
    M  DpShMCreate: allocated vmc_adm_list at 083EFA50
    M  DpShMCreate: allocated gw_adm at 083EFA90
    M  DpShMCreate: system runs without vmc_adm
    M  DpShMCreate: allocated ca_info at 083EFAC0
    M  DpShMCreate: allocated wall_adm at 083EFAC8
    X  EmInit: MmSetImplementation( 2 ).
    X  MM global diagnostic options set: 0
    X  <ES> client 0 initializing ....
    X  Using implementation flat
    M  <EsNT> Memory Reset disabled as NT default
    X  ES initialized.
    M 
    M Thu Jan 05 07:24:03 2012
    M  ThInit: running on host sugarland
    M 
    M Thu Jan 05 07:24:04 2012
    M  calling db_connect ...
    C  Warning: Env(MSSQL_SERVER) [SUGARLAND\DE1] <> Prof(dbs/mss/server) [SUGARLAND]. Profile value will be used.
    C  Thread ID:708
    C  Thank You for using the SLOLEDB-interface
    C  Using dynamic link library 'C:\usr\sap\DE1\SYS\exe\uc\NTI386\dbmssslib.dll'
    C  dbmssslib.dll patch info
    C    patchlevel   0
    C    patchno      72
    C    patchcomment MSSQL: Thread check in DbSlDisconnect (969143)
    C  np:(local) connection used on SUGARLAND
    C  CopyLocalParameters: dbuser is 'de1'
    C  Using Provider SQLNCLI
    C  OpenOledbConnection: MARS property was set successfully.
    C 
    C Thu Jan 05 07:24:19 2012
    C  OpenOledbConnection: line 23391. hr: 0x8000ffff Login timeout expired
    C  sloledb.cpp [OpenOledbConnection,line 23391]: Error/Message: (err 0, sev 0), Login timeout expired
    C  Procname: [OpenOledbConnection - no proc]
    C  sloledb.cpp [OpenOledbConnection,line 23391]: Error/Message: (err 2, sev 0), An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections.
    C  Procname: [OpenOledbConnection - no proc]
    C  sloledb.cpp [OpenOledbConnection,line 23391]: Error/Message: (err 2, sev 0), Named Pipes Provider: Could not open a connection to SQL Server [2].
    C  Procname: [OpenOledbConnection - no proc]
    C  sloledb.cpp [OpenOledbConnection,line 23391]: Error/Message: (err 0, sev 0), Invalid connection string attribute
    C  Procname: [OpenOledbConnection - no proc]
    C  Using Provider SQLNCLI
    C  OpenOledbConnection: MARS property was set successfully.
    C 
    C Thu Jan 05 07:24:34 2012
    C  OpenOledbConnection: line 23391. hr: 0x8000ffff Login timeout expired
    C  sloledb.cpp [OpenOledbConnection,line 23391]: Error/Message: (err 0, sev 0), Login timeout expired
    C  Procname: [OpenOledbConnection - no proc]
    C  sloledb.cpp [OpenOledbConnection,line 23391]: Error/Message: (err 2, sev 0), An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections.
    C  Procname: [OpenOledbConnection - no proc]
    C  sloledb.cpp [OpenOledbConnection,line 23391]: Error/Message: (err 2, sev 0), Named Pipes Provider: Could not open a connection to SQL Server [2].
    C  Procname: [OpenOledbConnection - no proc]
    C  sloledb.cpp [OpenOledbConnection,line 23391]: Error/Message: (err 0, sev 0), Invalid connection string attribute
    C  Procname: [OpenOledbConnection - no proc]
    C  Using Provider SQLNCLI
    C  OpenOledbConnection: MARS property was set successfully.
    C 
    C Thu Jan 05 07:24:49 2012
    C  OpenOledbConnection: line 23391. hr: 0x8000ffff Login timeout expired
    C  sloledb.cpp [OpenOledbConnection,line 23391]: Error/Message: (err 0, sev 0), Login timeout expired
    C  Procname: [OpenOledbConnection - no proc]
    C  sloledb.cpp [OpenOledbConnection,line 23391]: Error/Message: (err 2, sev 0), An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections.
    C  Procname: [OpenOledbConnection - no proc]
    C  sloledb.cpp [OpenOledbConnection,line 23391]: Error/Message: (err 2, sev 0), Named Pipes Provider: Could not open a connection to SQL Server [2].
    C  Procname: [OpenOledbConnection - no proc]
    C  sloledb.cpp [OpenOledbConnection,line 23391]: Error/Message: (err 0, sev 0), Invalid connection string attribute
    C  Procname: [OpenOledbConnection - no proc]
    C  failed to establish conn to np:(local).
    C  Retrying without protocol specifier: (local)
    C  Using Provider SQLNCLI
    C  OpenOledbConnection: MARS property was set successfully.
    C 
    C Thu Jan 05 07:25:05 2012
    C  OpenOledbConnection: line 23391. hr: 0x8000ffff Login timeout expired
    C  sloledb.cpp [OpenOledbConnection,line 23391]: Error/Message: (err 0, sev 0), Login timeout expired
    C  Procname: [OpenOledbConnection - no proc]
    C  sloledb.cpp [OpenOledbConnection,line 23391]: Error/Message: (err 2, sev 0), An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections.
    C  Procname: [OpenOledbConnection - no proc]
    C  sloledb.cpp [OpenOledbConnection,line 23391]: Error/Message: (err 2, sev 0), Named Pipes Provider: Could not open a connection to SQL Server [2].
    C  Procname: [OpenOledbConnection - no proc]
    C  sloledb.cpp [OpenOledbConnection,line 23391]: Error/Message: (err 0, sev 0), Invalid connection string attribute
    C  Procname: [OpenOledbConnection - no proc]
    C  Using Provider SQLNCLI
    C  OpenOledbConnection: MARS property was set successfully.
    C 
    C Thu Jan 05 07:25:21 2012
    C  OpenOledbConnection: line 23391. hr: 0x8000ffff Login timeout expired
    C  sloledb.cpp [OpenOledbConnection,line 23391]: Error/Message: (err 0, sev 0), Login timeout expired
    C  Procname: [OpenOledbConnection - no proc]
    C  sloledb.cpp [OpenOledbConnection,line 23391]: Error/Message: (err 2, sev 0), An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections.
    C  Procname: [OpenOledbConnection - no proc]
    C  sloledb.cpp [OpenOledbConnection,line 23391]: Error/Message: (err 2, sev 0), Named Pipes Provider: Could not open a connection to SQL Server [2].
    C  Procname: [OpenOledbConnection - no proc]
    C  sloledb.cpp [OpenOledbConnection,line 23391]: Error/Message: (err 0, sev 0), Invalid connection string attribute
    C  Procname: [OpenOledbConnection - no proc]
    C  Using Provider SQLNCLI
    C  OpenOledbConnection: MARS property was set successfully.
    C 
    C Thu Jan 05 07:25:37 2012
    C  OpenOledbConnection: line 23391. hr: 0x8000ffff Login timeout expired
    C  sloledb.cpp [OpenOledbConnection,line 23391]: Error/Message: (err 0, sev 0), Login timeout expired
    C  Procname: [OpenOledbConnection - no proc]
    C  sloledb.cpp [OpenOledbConnection,line 23391]: Error/Message: (err 2, sev 0), An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections.
    C  Procname: [OpenOledbConnection - no proc]
    C  sloledb.cpp [OpenOledbConnection,line 23391]: Error/Message: (err 2, sev 0), Named Pipes Provider: Could not open a connection to SQL Server [2].
    C  Procname: [OpenOledbConnection - no proc]
    C  sloledb.cpp [OpenOledbConnection,line 23391]: Error/Message: (err 0, sev 0), Invalid connection string attribute
    C  Procname: [OpenOledbConnection - no proc]
    C  failed to establish conn. 0
    B  ***LOG BY2=> sql error 0      performing CON [dbsh#2 @ 1204] [dbsh    1204 ]
    B  ***LOG BY0=> <message text not available> [dbsh#2 @ 1204] [dbsh    1204 ]
    B  ***LOG BY2=> sql error 0      performing CON [dblink#3 @ 431] [dblink  0431 ]
    B  ***LOG BY0=> <message text not available> [dblink#3 @ 431] [dblink  0431 ]
    M  ***LOG R19=> ThInit, db_connect ( DB-Connect 000256) [thxxhead.c   1411]
    M  in_ThErrHandle: 1
    M  *** ERROR => ThInit: db_connect (step 1, th_errno 13, action 3, level 1) [thxxhead.c   10156]
    M 
    M  Info for wp 0
    M 
    M    stat = 4
    M    reqtype = 1
    M    act_reqtype = -1
    M    rq_info = 0
    M    tid = -1
    M    mode = 255
    M    len = -1
    M    rq_id = 65535
    M    rq_source = 255
    M    last_tid = 0
    M    last_mode = 0
    M    semaphore = 0
    M    act_cs_count = 0
    M    control_flag = 0
    M    int_checked_resource(RFC) = 0
    M    ext_checked_resource(RFC) = 0
    M    int_checked_resource(HTTP) = 0
    M    ext_checked_resource(HTTP) = 0
    M    report = >                                        <
    M    action = 0
    M    tab_name = >                              <
    M    vm = V-1
    M 
    M  *****************************************************************************
    M  *
    M  *  LOCATION    SAP-Server sugarland_DE1_11 on host sugarland (wp 0)
    M  *  ERROR       ThInit: db_connect
    M  *
    M  *  TIME        Thu Jan 05 07:25:37 2012
    M  *  RELEASE     700
    M  *  COMPONENT   Taskhandler
    M  *  VERSION     1
    M  *  RC          13
    M  *  MODULE      thxxhead.c
    M  *  LINE        10354
    M  *  COUNTER     1
    M  *
    M  *****************************************************************************
    M 
    M  PfStatDisconnect: disconnect statistics
    M  Entering TH_CALLHOOKS
    M  ThCallHooks: call hook >ThrSaveSPAFields< for event BEFORE_DUMP
    M  *** ERROR => ThrSaveSPAFields: no valid thr_wpadm [thxxrun1.c   720]
    M  *** ERROR => ThCallHooks: event handler ThrSaveSPAFields for event BEFORE_DUMP failed [thxxtool3.c  260]
    M  Entering ThSetStatError
    M  ThIErrHandle: do not call ThrCoreInfo (no_core_info=0, in_dynp_env=0)
    M  Entering ThReadDetachMode
    M  call ThrShutDown (1)...
    M  ***LOG Q02=> wp_halt, WPStop (Workproc 0 988) [dpnttool.c   327]
    Please help me on this
    Thanks
    Srikanth

    Hi Amit, 
                 I restarted the system but dispatcher still in same stage.
    Here is the log for dev_w0
    ========================================
    Fri Jan 06 03:41:06 2012
    C  OpenOledbConnection: line 23391. hr: 0x8000ffff Login timeout expired
    C  sloledb.cpp [OpenOledbConnection,line 23391]: Error/Message: (err 0, sev 0), Login timeout expired
    C  Procname: [OpenOledbConnection - no proc]
    C  sloledb.cpp [OpenOledbConnection,line 23391]: Error/Message: (err 2, sev 0), An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections.
    C  Procname: [OpenOledbConnection - no proc]
    C  sloledb.cpp [OpenOledbConnection,line 23391]: Error/Message: (err 2, sev 0), Named Pipes Provider: Could not open a connection to SQL Server [2].
    C  Procname: [OpenOledbConnection - no proc]
    C  sloledb.cpp [OpenOledbConnection,line 23391]: Error/Message: (err 0, sev 0), Invalid connection string attribute
    C  Procname: [OpenOledbConnection - no proc]
    C  failed to establish conn. 0
    B  ***LOG BY2=> sql error 0      performing CON [dbsh#2 @ 1204] [dbsh    1204 ]
    B  ***LOG BY0=> <message text not available> [dbsh#2 @ 1204] [dbsh    1204 ]
    B  ***LOG BY2=> sql error 0      performing CON [dblink#3 @ 431] [dblink  0431 ]
    B  ***LOG BY0=> <message text not available> [dblink#3 @ 431] [dblink  0431 ]
    M  ***LOG R19=> ThInit, db_connect ( DB-Connect 000256) [thxxhead.c   1411]
    M  in_ThErrHandle: 1
    M  *** ERROR => ThInit: db_connect (step 1, th_errno 13, action 3, level 1) [thxxhead.c   10156]
    M 
    M  Info for wp 0
    M 
    M    stat = 4
    M    reqtype = 1
    M    act_reqtype = -1
    M    rq_info = 0
    M    tid = -1
    M    mode = 255
    M    len = -1
    M    rq_id = 65535
    M    rq_source = 255
    M    last_tid = 0
    M    last_mode = 0
    M    semaphore = 0
    M    act_cs_count = 0
    M    control_flag = 0
    M    int_checked_resource(RFC) = 0
    M    ext_checked_resource(RFC) = 0
    M    int_checked_resource(HTTP) = 0
    M    ext_checked_resource(HTTP) = 0
    M    report = >                                        <
    M    action = 0
    M    tab_name = >                              <
    M    vm = V-1
    M 
    M  *****************************************************************************
    M  *
    M  *  LOCATION    SAP-Server sugarland_DE1_11 on host sugarland (wp 0)
    M  *  ERROR       ThInit: db_connect
    M  *
    M  *  TIME        Fri Jan 06 03:41:06 2012
    M  *  RELEASE     700
    M  *  COMPONENT   Taskhandler
    M  *  VERSION     1
    M  *  RC          13
    M  *  MODULE      thxxhead.c
    M  *  LINE        10354
    M  *  COUNTER     1
    M  *
    M  *****************************************************************************
    M 
    M  PfStatDisconnect: disconnect statistics
    M  Entering TH_CALLHOOKS
    M  ThCallHooks: call hook >ThrSaveSPAFields< for event BEFORE_DUMP
    M  *** ERROR => ThrSaveSPAFields: no valid thr_wpadm [thxxrun1.c   720]
    M  *** ERROR => ThCallHooks: event handler ThrSaveSPAFields for event BEFORE_DUMP failed [thxxtool3.c  260]
    M  Entering ThSetStatError
    M  ThIErrHandle: do not call ThrCoreInfo (no_core_info=0, in_dynp_env=0)
    M  Entering ThReadDetachMode
    M  call ThrShutDown (1)...
    M  ***LOG Q02=> wp_halt, WPStop (Workproc 0 3632) [dpnttool.c   327]

  • ODI 10.1.3.5 with SQL Server 2005

    Good afternoon,
    We recently installed 10.1.3.5, in a Windows environment with SQL Server 2005 and Hyperion Essbase/Planning/HFM 11.1.1. We were following John Goodwin's infamous blog (thanks, John!), but ran into a number of snags.
    For instance, when we set-up interfaces with flat files as the source, loading metadata either to Planning or Essbase, ODI errors out when:
    1) our header name in the flat file has spaces (using double quotes didn't work)
    2) our header name in the flat file is different than the reverse property name from Essbase/Planning.
    Also, we're now seeing an issue in our Flat file to Essbase metadata interface where the SQL used in the IKM seems to be incorrect. Below is the error message we're receiving:
    "org.apache.bsf.BSFException: exception from Jython:
    Traceback (innermost last):
    File "<string>", line 20, in ?
    com.microsoft.sqlserver.jdbc.SQLServerException: An object or column name is missing or empty. For SELECT INTO statements, verify each column has a name. For other statements,
    look for empty alias names. Aliases defined as "" or [] are not allowed. Add a name or single space as the alias name."
    We are thinking that the culprit may be either the wrong .jar or .jre we're using with SQL Server 2005, as there seem to be inherent issues with the SQL generated in the LKM and IKM. Our questions to you:
    1. What sqljdbc.jar driver version are you using?
    2. What .jre version are you using?
    3. What environment does the above work correctly in? (perhaps an earlier version of ODI against an earlier version of Hyperion?)
    FYI - We have tried sqljdbc 1.0 and 2.0, with .jre 1.6.0_10.
    Thanks in advance!
    -O
    Edited by: Alapat on Jan 22, 2009 8:04 AM

    Thank you very much for responding!
    After a 2 week battle, we are now finally coming to a close on our issues (although we cannot say for sure what all of the causes were).
    Here is what we discovered about our questions, through other threads:
    1. John Goodwin was using JRE 1.6.x, so we ruled that out as a culprit.
    2. Others are using SQL Server 2005 just fine with ODI, so we ruled this out too. We chose to keep the sqljdbc 2.0 driver.
    Here are some issues we did uncover during our investigation:
    1. We were having issues with our agent, specifically regarding the HFM technology. We created a new one, added a few extra parameters, compiled the agent, and are now back up and running. We realized the problem when we switched to "Local (No Agent)" and saw that we were not having as many issues.
    2. We went into the physical agent and pressed "Update Scheduling". We do not know if this had any effect, but we suddenly noticed that our flat file header issues were resolved.
    3. The Essbase issue was due to a configuration error with our Hyperion Essbase physical technology. We went into that technology and changed a setting on the "Languages" tab, called "Object Delimiter". It had double-quotes in it - we removed that parameter and instantly saw a change in the SQL being executed.
    4. Some of the mappings in our interfaces needed to be executed on different environments. i.e. - We needed to switch to "staging" when the flat file header was different than the target column name. Newbie mistake - we thought ODI had built-in intelligence to choose correctly for us.
    5. When doing a reverse on Essbase models, we noticed that the Essbase columns would populate with an "Undefined" datatype, instead of the expected CHAR. We have to manually define all column datatypes after every Essbase reverse now. Must be a bug.
    6. We also noticed when doing a flat file reverse that all columns auto-populate with datatype STRING, length 50. We have to manually personalize that option for different Hyperion applications, based on need. i.e. - some require numeric datatypes, or smaller/larger lengths. This was obviously a newbie error. :)
    Thank you for your tip on the MS SS2005 JDBC drivers - we will look into your other options - IMHO, JTDS, etc.
    -O

  • Sharepoint Foundation 2010 compatibility with SQL Server 2014

    Due to a requirement to use Sharepoint without Active Directory access.  I am trying to find explicit confirmation whether Sharepoint Foundation 2010 is compatible with SQL Server 2014.  I have seen that Sharepoint Server 2010 and 2013 are compatible
    with SQL Server 2014 as of CU 1 (released in April).  But there is no mention of Sharepoint Foundation.
    This chart is great except it doesn't mention whether the Foundation versions are supported.
    http://msdn.microsoft.com/en-us/library/gg492257.aspx
    Thanks.

    Note that that is for the Reporting Services component, but not necessarily for the SQL Database Engine component (which comes from the SharePoint Product Group, rather than the SQL Product Group). I haven't seen any confirmation that SharePoint 2010 is
    supported at all with SQL 2014 as a Database Engine.
    Trevor Seward
    Follow or contact me at...
    &nbsp&nbsp
    This post is my own opinion and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs.

  • Can I use Same ADF application with SQL server 2008 as well as Oracle 11g?

    Hi ,
    I have created a application in ADF(Using J-Developer). I used SQL server 2008 as Database Provider. I have same Database in Oracle 11g. I want to connect my appliction to Oracle 11g database. I changed connection and connected to Oracle. But, when I tried to save or delete any data from front end, it gave error. Any solution on this?
    Thanks

    Hi,
    I have created Entity object and View object for every page in my application. That objects created from sql server database. Application is working fine with sql server. But when connected with Oracle 11g. It is giving following errors:
    On clicking search control it gives: ORA 00923 From keyword not found where expected.
    On searching with perticular field it gives: ORA-01722: Invalid Number.
    On Clicking save buttonit gives: ORA-00933: SQL command not properly ended.
    These are error messages from IntegratedWebLogicServer-Log:
    java.sql.SQLSyntaxErrorException: ORA-00923: FROM keyword not found where expected
    <QueryCollection> <buildResultSet> [3929] java.sql.SQLSyntaxErrorException: ORA-00923: FROM keyword not found where expected
    Caused by: java.sql.SQLSyntaxErrorException: ORA-00923: FROM keyword not found where expected
    <DCBindingContainer> <cacheException> [3947] * * * BindingContainer caching EXCEPTION:oracle.jbo.SQLStmtException
    <DCBindingContainer> <cacheException> [3948] java.sql.SQLSyntaxErrorException: ORA-00923: FROM keyword not found where expected
    <DCBindingContainer> <cacheException> [3949] * * * BindingContainer caching EXCEPTION:oracle.jbo.SQLStmtException
    <DCBindingContainer> <cacheException> [3950] java.sql.SQLSyntaxErrorException: ORA-00923: FROM keyword not found where expected
    <DCBindingContainer> <cacheException> [3951] * * * BindingContainer caching EXCEPTION:oracle.jbo.SQLStmtException
    <DCBindingContainer> <cacheException> [3952] java.sql.SQLSyntaxErrorException: ORA-00923: FROM keyword not found where expected
    <DCBindingContainer> <cacheException> [3953] * * * BindingContainer caching EXCEPTION:oracle.jbo.SQLStmtException
    <DCBindingContainer> <cacheException> [3954] java.sql.SQLSyntaxErrorException: ORA-00923: FROM keyword not found where expected
    java.lang.NullPointerException

  • JDBC with SQL Server

    Hi,
    I am trying to connect to a SQL server database by giving table name in (SPVC) database as spvc.dbo.tablename.. If i want to access another database (SPVC_D), how can i do it without changing my java code?? Can i be able to add the database name to the connection string and i can remove the hard coding (spvc.dbo.) from my java code?? How shall i be able to do that..
    Please let me know.. I am very new with JDBC with SQL server..
    Thanks
    Praveen Padala

    In the MS SQL Server that I use, the following syntax
    spvc.dbo.tablename
    Breaks done as follows...
    <database>.<user>.<tablename>
    However connections are always to a database. Thus when one uses the above syntax it basically runs 'in' the one database and accesses another.
    Depending on various attributes of the tables, if and only if, a table called 'tablename' exists in a database called 'spvc_d' then if you connect to 'spvc_d' then you can access 'tablename' just by using 'tablename'.
    So if that is what you are doing you will not have a problem.

  • Toplink with sql server

    I have sucessfully used Toplink with Oracle. ow I have to use it with MS SQL server and I am having problems. First of all, in the Mapping Worbench, the only SQL server driver listed is weblogic.jdbc.mssqlserver4.Driver. Why can't I use the regular ms sql driver, com.microsoft.jdbc.sqlserver.SQLServerDriver? Why should the mapping workbench be tied to Weblogic? If one did not have Weblogic, would it be impossible to use Toplink with SQL server? Well, I have Weblogic, so I tried using the weblogic driver with the url jdbc:microsoft:sqlserver://<host ip>:1433;DatabaseName=<db name>. When I try to connect, a dialog box appears that says: "java.sql.SQLException $$$$$$$$$$ License Exception $$$$$$$$$$ Missing license for: WebLogic Server 6.1. $$$$$$$$$$ License Exception $$$$$$$$$$ Username or password could be invalid." I have weblogic.jar in the classpath. I tried adding the line SET WLS61_HOME=M:\bea610\wlserver6.1 to workbench.cmd. It didn't help. Any suggestions?

    I already tried this. It does not work. I put the following jars in the classpath in workbench.cmd: msbase.jar;mssqlserver.jar;msutil.jar. Then I start workbench. When I try to enter com.microsoft.jdbc.sqlserver.SQLServerDriver as the driver, I get an exception. Here is the stacktrace:
    Exception occurred during event dispatching:
    java.lang.ClassCastException: com.webgain.openapi.foundation.uitools.WGDefaultListModel
         at com.webgain.workbench.ui.db.BldrLoginInfoPanel.actionPerformed(Unknown Source)
         at com.webgain.openapi.foundation.uitools.WGListChooser.fireActionEvent(WGListChooser.java:664)
         at com.webgain.openapi.foundation.uitools.WGListChooser$ListDataHandler.contentsChanged(WGListChooser.java:473)
         at javax.swing.AbstractListModel.fireContentsChanged(Unknown Source)
         at com.webgain.openapi.foundation.uitools.WGDefaultListModel.setSelectedItem(WGDefaultListModel.java:740)
         at com.webgain.openapi.foundation.uitools.WGListChooser.setSelectedItem(WGListChooser.java:1446)
         at com.webgain.openapi.foundation.plaf.basic.WGBasicListChooserUI$ListChooserModel.setSelectedItem(WGBasicListChooserUI.java:527)
         at javax.swing.JComboBox.actionPerformed(Unknown Source)
         at javax.swing.plaf.basic.BasicComboBoxUI$EditorFocusListener.focusLost(Unknown Source)
         at java.awt.AWTEventMulticaster.focusLost(Unknown Source)
         at java.awt.AWTEventMulticaster.focusLost(Unknown Source)
         at java.awt.Component.processFocusEvent(Unknown Source)
         at javax.swing.JComponent.processFocusEvent(Unknown Source)
         at java.awt.Component.processEvent(Unknown Source)
         at java.awt.Container.processEvent(Unknown Source)
         at java.awt.Component.dispatchEventImpl(Unknown Source)
         at java.awt.Container.dispatchEventImpl(Unknown Source)
         at java.awt.Component.dispatchEvent(Unknown Source)
         at java.awt.LightweightDispatcher.setFocusRequest(Unknown Source)
         at java.awt.Container.proxyRequestFocus(Unknown Source)
         at java.awt.Container.proxyRequestFocus(Unknown Source)
         at java.awt.Container.proxyRequestFocus(Unknown Source)
         at java.awt.Container.proxyRequestFocus(Unknown Source)
         at java.awt.Container.proxyRequestFocus(Unknown Source)
         at java.awt.Container.proxyRequestFocus(Unknown Source)
         at java.awt.Container.proxyRequestFocus(Unknown Source)
         at java.awt.Container.proxyRequestFocus(Unknown Source)
         at java.awt.Component.requestFocus(Unknown Source)
         at javax.swing.JComponent.grabFocus(Unknown Source)
         at javax.swing.JComponent.requestFocus(Unknown Source)
         at javax.swing.text.DefaultCaret.mousePressed(Unknown Source)
         at java.awt.AWTEventMulticaster.mousePressed(Unknown Source)
         at java.awt.AWTEventMulticaster.mousePressed(Unknown Source)
         at java.awt.AWTEventMulticaster.mousePressed(Unknown Source)
         at java.awt.Component.processMouseEvent(Unknown Source)
         at com.webgain.openapi.foundation.uitools.WGPasswordField.processMouseEvent(WGPasswordField.java:99)
         at java.awt.Component.processEvent(Unknown Source)
         at java.awt.Container.processEvent(Unknown Source)
         at java.awt.Component.dispatchEventImpl(Unknown Source)
         at java.awt.Container.dispatchEventImpl(Unknown Source)
         at java.awt.Component.dispatchEvent(Unknown Source)
         at java.awt.LightweightDispatcher.retargetMouseEvent(Unknown Source)
         at java.awt.LightweightDispatcher.processMouseEvent(Unknown Source)
         at java.awt.LightweightDispatcher.dispatchEvent(Unknown Source)
         at java.awt.Container.dispatchEventImpl(Unknown Source)
         at java.awt.Window.dispatchEventImpl(Unknown Source)
         at java.awt.Component.dispatchEvent(Unknown Source)
         at java.awt.EventQueue.dispatchEvent(Unknown Source)
         at java.awt.EventDispatchThread.pumpOneEventForHierarchy(Unknown Source)
         at java.awt.EventDispatchThread.pumpEventsForHierarchy(Unknown Source)
         at java.awt.EventDispatchThread.pumpEvents(Unknown Source)
         at java.awt.EventDispatchThread.run(Unknown Source)
    If I ignore the exception and try to connect to the database anyway, it tries to use the weblogic driver.
    Next I manually edited the database xml file and put in the driver name automatically. When I bought up the mapping workbench again, it again threw an exception. However, the correct driver name was in the file, so it did finally let me connect to the database. So it seems there IS a bug, although it has to do with the GUI and not SQL server per se.

  • Connectivity with sql server

    Dear community members;
    I am using Oracle 10g DB. Now I want to connect with SQL Server 2005. Is there any possiblity for connectivity. Because we have to pick some data from sqlserver on online transaction entry time.
    Waiting for usefull response.
    Thanks
    Shahab Ahmed Khan

    I am using oracle 11gR1 on windows 2003.
    This is my initaccessdb.ora(Path HS/ADMIN)
    HS_FDS_CONNECT_INFO = ACCESSDB
    HS_FDS_TRACE_LEVEL = OFF
    Listner File
    LISTENER =
    (DESCRIPTION_LIST =
    (DESCRIPTION =
    (ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1))
    (ADDRESS = (PROTOCOL = TCP)(HOST = APPSERVER)(PORT = 1521))
    SID_LIST_LISTENER=
    (SID_LIST=
    (SID_DESC=
    (SID_NAME=PLSExtProc)
    (ORACLE_HOME=E:\app\Administrator\product\11.1.0\db_1)
    (PROGRAM=extproc)
         (SID_DESC =
         (SID_NAME = accessdb)
    (ORACLE_HOME = E:\app\Administrator\product\11.1.0\db_1)
    (PROGRAM = ACCESSDB)
         (ENVS=LD_LIBRARY_PATH=D:\)      
    TNSNAME.ORA
    ORCL =
    (DESCRIPTION =
         (ADDRESS = (PROTOCOL = TCP)(HOST = 172.16.0.14)(PORT = 1521))
         (CONNECT_DATA =
              (SERVER = DEDICATED)
              (SERVICE_NAME= ORCL)
    ACCESSDB =
    (DESCRIPTION=
         (ADDRESS =(PROTOCOL = TCP)(HOST=172.16.0.14)(PORT=1521))
              (CONNECT_DATA =
              (SERVICE_NAME=ACCESSDB))
                   (HS = OK)
    I successfully completed all steps as mentioned in your sending links documents but when i test my dblink query it gives the error message
    SQL> conn sys as sysdba
    Enter password:
    Connected.
    SQL> conn ahmed
    Enter password:
    Connected.
    SQL> drop database link test;
    Database link dropped.
    SQL> create database link test using 'ACCESSDB';
    Database link created.
    SQL> SELECT * FROM EMPLOYEE@TEST;
    SELECT * FROM EMPLOYEE@TEST
    ERROR at line 1:
    ORA-28545: error diagnosed by Net8 when connecting to an agent
    Unable to retrieve text of NETWORK/NCR message 65535
    ORA-02063: preceding 2 lines from TEST
    Note: Please tell me that should i install ODBC driver ("Microsoft Access Driver *.mdb).If this should be installed then i have done correctly.
    Thanks

  • Connecting with SQL Server

    Dear All,
    I m new to JDeveloper and want to make a connection with SQL Server 2008 but in Connection Dialogue with following Settings :-
    Connection Type: SQL Server
    UserName: sa
    Password: ******
    HostName: EServer
    DatabaseName: DBName
    PortNumber: 1430
    Driver Class: com.microsoft.sqlserver.jdbc.SQLServerDriver
    Library:
    As I Press Test Connection it gives following error:
    Test failed: Driver class not found.
    Verify the Driver location
    Pls suggest

    Download sqljdbc.jar and Add it to the Viewcontroller Libraries and Classpath (Project Properties of ViewController)

  • DBConnect with SQL Server

    Hi,
    we have a dbconnect source system with sql server.
    The installation is correct and we have the list of tables and views.
    We can get a list of table/view content too.
    But, when we make an infopackage request there is no idoc generated and the status color of the request get yellow.
    Tips:
    - We have in SQL the user with permissions to do selects and create views.
    - The list of tables/views in source system not extract this user owner. Only extracts the sa owner.
    - We connect with our user, not with sa.
    Any one have an idea
    Tanks
    Xavo

    Hi,
    This is some sort of privileges problem . The user which is used in  the Source system definition ,Should have Atleast select statement privileges on the table and view. If you are using view you can change the owner of this view to user , which is used in the Source system definition .
    With rgds,
    Anil Kumar Sharma .P

  • Forms with SQL Server

    hi,
    Is it possible to connect forms with sql server? if yes, how?
    Any help will be highly appreciated

    Maybe. see:
    <Note:212382.1> How to Build Forms against Microsoft Sql Server
    also do a Metalink search on:
    'oracle client adaptor'
    Best of luck,
    ejs

  • SQL Server to Oracle migration with SQL Server DTS

    I migrate database from SQL Server to Oracle with SQL Server DTS. the process is success. I can select table_name from user_tables or user_objects. I also can see the table from DBA Studio. But When I use desc to list the structure of table in SQLPLUS. it tell me object don't exist.
    What is wrong?
    Thanks

    use sp_help <tablename>

  • Server 2008 with SQL server 2003 installation problem in SAP 8.8 in clint

    Hello Sir
    I want to install clint for SAP B1 8.8 and we have windows server 2008 with sql server 2005
    when i install the clint i got one error in DI API installation that licence server name and port number is not available.
    Please tell me the complete process to install 8.8. clint with which supporting software i have to install in clint machine.
    and what things i have to check in server for installation .
    Please kindly reply ASAP.
          Thanks
    Vaibhav Kothari

    Hi,
    every question / issue you should know, is descripted in the following manual, please read it and follow the installation instruction manual:
    https://websmp201.sap-ag.de/~sapidb/011000358700000150922010E.zip
    Regards Steffen

  • Crystal Report 8.5 with SQL SERVER 2005 problems

    Post Author: AREVA
    CA Forum: Data Connectivity and SQL
    Hi All !We have some problems with Crystal Reports version 8.5 with SQL Server 2005: 1) When we want to generate a report (using data in SQL Server 2005) we have a popup message error : "impossible to loaded pdssql.dll".2) If we want to use SQL Server 2005, which Crystal Reports version we must used ? Is there any restrictions with this connectivity with 8.5 version ?Please, let me known, all informations about SQL Server 2005 and Crystal Report 8.5.Thanks for all !Best regards Anthony

    Hello Kamlesh,
    There is no expectation that the ActiveX viewer (RDC?) from CR8.5 will work in any version of Visual Studio .NET. There is also no expectation that the ActiveX viewer from CR8.5 will work on a machine with a 64 bit operating system.
    You're using VS2008. You should migrate to the bundled edition of CR for VS2008 (v10.5), the ReportDocument object, and the .NET Windows form viewer or Web form viewer.
    Sincerely,
    Dan Kelleher

Maybe you are looking for

  • Bonjour services disappear - can't see speakers in iTunes

    Hi, I guess this might not be the correct forum but I can't seem to find anywhere else it may sit. I am having issues with certain bonjour services not running on my iMac, this is mainly affecting speakers being shown in iTunes. I don't have a proble

  • How can I remove applications from the location service?

    In System Preferences> Security & Privacy> Privacy> Location Services are applications that ask the system to use the position of the Mac I realized, after uninstalling applications (Beta and Tweetbot Tweetbot 1.0MacAppStore and also Busycal) are not

  • IDVD6 and 3rd party DVD burners

    I purchased iLife for the ability to burn to a 3rd party DVD burner with iDVD6. I can't for the life of me figure how to burn to the 3rd party burner. Please help. imac G4   Mac OS X (10.3.9)  

  • Message no. AG021 when doing component availabilty check,

    Hi PP Gurus, When I'm trying to do Availability check for Planned order (order type PE) getting an error 'No control data maintained for checking group 02 and checking rule' (Message no. AG021) though Availability checking control for order type PP01

  • Import 3.1 apex themes to 3.0

    Hi friends, I am using Apex 3.0 and i want to use the themes which is available with Apex 3.1. So is it possible to do an export and import 3.1 themes to 3.0 ?? Regards, Kalesh.