Interfaces with dependency

Hi experts!
I would like to know the best way to handle interfaces with dependency in XI.
I have a range of 60 interfaces that can only be processed if the last one was sucessful processed. I thought that I could use BPM to handle this, but with so many interfaces in a dependency range is still a good solution?
Points will be given!
Regards,
Daniela

Hi experts,
Has anybody ever needed to control dependencies in a File to file scenario?
I took a look on Karthikeyan K's weblog, but I have some questions if it is possible to do this even if my scenario doesn't have a ECC side.
Points will be given.
Regards,
Daniela

Similar Messages

Swift Net MT-103 Interface with SAP

Hello all,
I am having a hard time to understand the concept and reason to use the Swiftnet MT103 (Outgoing Payment).
1)At what point I will consider MT103 solution versus EDI820 (Outgoing Payment)?
2)What will be the considerations I need to take place when I am creating the Functional Design of this interface with SAP?
3)What will be the steps I need to take on the config side?
4)Do I need to setup inbound interface as well for confirmation once I sent the MT103 file?
5)DME will be only solution that produce this format?
6)Please provide me the File structure of MT103?
I would appreciate your prompt response since I need to represent this to the client.
Thanks

Hi
It is a good practice to know the status of payment file rather than waiting for the bank to call. Yes, if need be, you will need to create an inbound interface.
Many things would depend on the method of communcation with banks you choose (i.e. direct connection or value added network), which needs to be secure and encrypted. SWIFTnet is a product that SWIFT offers to allow companies to build a single connection to SWIFT net and connect to thousands of banks around the globe. I am not sure whether this is a valid scenario for your project. Obviously, there is a cost implication attached to it.
If you are using BCM module, you would need to use a format created in Payment media workbench for MT103 and PI to faciliate the file mapping, conversion, encryption and secure transmission to your bank. In this case, you would build an inbound interface for Status/Confirmation from bank into BCM for Batch monitor.
while if you are not using BCM module, you would map IDOC to MT103. in this case, you would build an Inbound Interface to manage the confirmation message from bank. I have worked on this sort of interface development and developed a report output for users to run.
Hope that this helps
taro

Can java interface with windows to do things

Good evening
I am a student and i am trying to do a project and i wanted to ask everyone here before i asked my teacher,
what i am trying to do is this . create a class that can be run from the desktop that will give me a window of option to do following things
1) install printer drivers
2) run a uninstall program
3) use keys like CTRL ALT SHIFT AND F6 to pop open windows, and is there a way that can have a password entered automatically?
4) change registry keys
5) call up reg keys
6) copy files from one computer ( laptop ) to my lab class over the network onto a specific profile?
if someone out there can just tell me weather or not Java has the capiablity of interfacing with windows control panel, or any of the above stuff let me know and just give me a push in the right direction Please.
Derek

Speaking of Java itself.
1) install printer driversNo
2) run a uninstall programNo
3) use keys like CTRL ALT SHIFT AND F6 to pop open windows, and is there a way that can have a password entered automatically?Depends what you mean but you might be able to do this using the Robot (in the awt package.)
4) change registry keysNo
5) call up reg keysNo
6) copy files from one computer ( laptop ) to my lab class over the network onto a specific profile?Depends on what you mean. Java can be used to send files to other computers. Doing that requires that you understand how the other computer (not your compute) processes are controlled.
You can of course do all of the above with windows API (not java) calls. And this is the forum about the JNI interface which allows a Java program to access native APIs, like the Windows one. It does however require quite a bit of detail work in a language besides Java, like C or C++. It is going to be easier if you have quite a bit of experience with those. If not then plan on spending a lot of time learning (factor that into how long it will take to do your project.) And of course you would need to research the APIs for all of the above.
If it matters the registry one is rather easy in terms of the windows API. And you can find many examples of C/C++ code to access it.

Interface with oracle system

Dear all,
I am working on asset tracking process for telecommunication sector.
here they are maintaining rt now all there equipment data in some CRAMER system basically oracle based system but they are not having any asset tracking system in this.
My solution for them is creating equipment-asset sync....so that whenever asset is created system will create equip and vice versa...but i hav 2 concerns here:
1. Can we do many equipment to one asset integration....as this is requirement here....and if we can den how we will handle change in master data wether in equip or asset.
2. I can't obslete their CRAMER system cause they are having other activities to it also.
So, I need to make interface with CRAMER that whenever any equoipment is created in the CRAMER parlaely in SAP equipment master data should be created and also asset and vice versa.......
plz suggest how wud i handle this.....
thanks in advance
RManchanda

Its common to make one or other of the systems the master system, and the other the slave.
This ensures that the data is created/changed in one system only with a one-way interface.
Depending how you create the interface, it can be real-time(single record) , or batch (multiple records)
PeteA

Interface with Yahoo Games?

Hello:
I would like to try to write an my own applet to interface with the game server at Yahoo. Is that possible? Can someone points me to the documentation of how to interface with Yahoo game servers, please?
Thanks.

Of course it's possible. However, they must first define an API or some interface for using their games. You need to get in touch with the people at Yahoo and find out what their interface is. You may use EJB, RMI, or who knows. You may have to use JNI, but it all depends on how Yahoo has their games setup. Without more information, I can't give you a specific answer.

How to create one soap interface with two soap action?

Hi,
I need to create one SOAP Interface with two or more webmethods (soap action), for example:
Interface: MI_Outb_User
Webmethods: createUser, searchUser, deleteUser.
Can anybody helpe me?

Hi Santos,
I assume you will use one action at a time and depending upon certain condition you want to invoke the webservice and the corresponding action. If this is yes, then please check michaels reply in this thread:
How can I handle serveral soap actions
or see stefans reply:
Re: Is SOAP Adapter Action field can contain 2 or more "SOAP Actions"
If this is not, then please ignore it.
Regards,
---Satish

Configuring Paging system to interface with an FXO port

Hello
Wanted to see if there is some good documentation on configuring my fxo port on my gateway to interface with a paging system?
Thank you for your help

Hi Joseph,
It really depends on the type of overhead paging system you're intending to use. The documentation for the paging system being used usually specifies exactly what type of circuit is required.
Kind regards,
Craig

Database design to support parameterised interface with MS Excel

Hi, I am a novice user of SQL Server and would like some advice on how to solve a problem I have. (I hope I have chosen the correct forum to post this question)
I have created a SQL Server 2012 database that comprises approx 10 base tables, with a further 40+ views that either summarise the base table data in various ways, or build upon other views to create more complex data sets (upto 4 levels of view).
I then use EXCEL to create a dashboard that has multiple pivot table data connections to the various views.
The users can then use standard excel features - slicers etc to interrogate the various metrics.
The underlying database holds a single days worth of information, but I would like to extend this to cover multiple days worth of data, with the excel spreadsheet having a cell that defines the date for which information is to
be retrieved.(The underlying data tables would need to be extended to have a date field)
I can see how the excel connection string can be modified to filter the results such that a column value matches the date field,
but how can this date value be passed down through all the views to ensure that information from base tables is restricted for the specied date, rather than the final results set being passed back to excel - I would rather not have the server resolve the views
for the complete data set.
I considered parameterisation of views, but I dont believe views support parameters, I also considered stored procedures, but I dont believe that stored procedures allow result sets to be used as pseudo tables.
What other options do I have, or have I failed to grasp the way SQL server creates its execution plans and simply having the filter at the top level will ensure the result set is minimised at the lower level? (I dont really want the time taken for the dashboard
refresh to increase - it currently takes approx 45 seconds following SQL Server Engine Tuning Advisor recommendations)
As an example of 3 of the views,
Table A has a row per system event (30,000+ per day), each event having an identity, a TYPE eg Arrival or Departure, with a time of event, and a planned time for the event (a specified identity will have a sequence of Arrival and Departure events)
View A compares seperate rows to determine how long between the Arrival and Departure events for an identity
View B compares seperate rows to determine how long between planned Arrival and Departure events for an identity
View C uses View A and view B to provide the variance between actual and planned
Excel dashboard has graphs showing information retrieved from Views A, B and C. The dashboard is only likely to need to query a single days worth of information.
Thanks for your time.

You are posting in the database design forum but it seems to me that you have 2 separate but highly dependent issues - neither of which is really database design related at this point. Rather you have an user interface issue and an database programmability
issue. Those I cannot really address since much of that discussion requires knowledge of your users, how they interface with the database, what they use the data for, etc. In addition, it seems that Excel is the primary interface for your users
- so it may be that you should post your question to an excel forum.
However, I do have some comments. First, views based on views is generally a bad approach. Absent the intention of indexing (i.e., materializing) the views, the db engine does nothing different for a view than it does for any ad-hoc query.
Unfortunately, the additional layering of logic can impede the effectiveness of the optimizer. The more complex your views become and the deeper the layering, the greater the chance that you befuddle the optimizer.
I would rather not have the server resolve the views for the complete data set
I don't understand the above statement but it scares me. IMO, you DO want the server to do as much work as possible since it is closest to the data and has (or should have) the resources to access and manipulate the data and generate the desired
results. You DON'T want to move all the raw data involved in a query over the network and into the client machine's storage (memory or disk) and then attempt to compute the desired values.
I considered parameterisation of views, but I dont believe views support parameters, I also considered stored procedures, but I dont believe that stored procedures allow result sets to be used as pseudo tables.
Correct on the first point, though there is such a thing as a TVF which is similar in effect. Before you go down that path, let's address the second statement. I don't understand that last bit about "used as pseudo tables" but that sounds more
like an Excel issue (or maybe an assumption). You can execute a stored procedure and use/access the resultset of this procedure in Excel, so I'm not certain what your concern is. User simplicity perhaps? Maybe just a terminology issue? Stored
procedures are something I would highly encourage for a number of reasons. Since you refer to pivoting specifically, I'll point out that sql server natively supports that function (though perhaps not in the same way/degree Excel does). It
is rather complex tsql - and this is one reason to advocate for stored procedures. Separate the structure of the raw data from the user.
(I dont really want the time taken for the dashboard refresh to increase - it currently takes approx 45 seconds following SQL Server Engine Tuning Advisor recommendations)
DTA has its limitations. What it doesn't do is evaluate the "model" - which is where you might have more significant issues. Tuning your queries and indexing your tables will only go so far to compensate for a poorly designed schema (not that
yours is - just a generalization). I did want to point out that your refresh process involves many factors - the time to generate a resultset in the server (including plan compilation, loading the data from disk, etc.), transmitting that data over the
network, receiving and storing the resultset in the client application, manipulating the resultset into the desired form/format), and then updating the display. Given that, you need to know how much time is spent in each part of that process - no sense
wasting time optimizing the smallest time consumer.
So now to your sample table - Table A. First, I'll give you my opinion of a flawed approach. Your table records separate facts about an entity as multiple rows. Such an approach is generally a schema issue for a number of reasons.
It requires that you outer join in some fashion to get all the information about one thing into a single row - that is why you have a view to compare rows and generate a time interval between arrival and departure. I'll take this a step further and assume
that your schema/code likely has an assumption built into it - specifically that a "thing" will have no more than 2 rows and that there will only be one row with type "arrival" and one row with type "departure". Violate that assumption and things begin to
fall apart.  If you have control over this schema, then I suggest you consider changing it. Store all the facts about a single entity in a single row.  Given the frequency that I see this pattern, I'll guess that you
cannot. So let's move on.
30 thousand rows is tiny, so your current volume is negligible. You still need to optimize your tables based on usage, so you need to address that first. How is the data populated currently? Is it done once as a batch?  Is it
done throughout the day - and in what fashion (inserts vs updates vs deletes)? You only store one day of data - so how do you accomplish that specifically?  Do you purge all data overnight and re-populate? What indexes
have you defined? Do all tables have a clustered index or are some (most?) of them heaps?   OTOH, I'm going to guess that the database is at most a minimal issue now and that most of your concerns are better addressed at the user interface
and how it accesses your database. Perhaps now is a good time to step back and reconsider your approach to providing information to the users. Perhaps there is a better solution - but that requires an understanding of your users, the skillset of
everyone involved, what you have to work with, etc. Maybe just some advanced excel training? I can't really say and it might be a better question for a different forum.
One last comment - "identity" has a special meaning in sql server (and most database engines I'm guessing). So when you refer to identity, do you refer to an identity column or the logical identity (i.e., natural key) for the "thing" that Table A is
attempting to model?

Encoder interfaced with NI-9401

I have purchased an encoder which has open collector and 3.3 Kohm pull-up resistor (TTL) as its logic output.
The encoder comes with four leads: +5V power, GND, Channel A and Channel B. Both Channel A and Channel B are logic output.
Channel A and Channel B are connected to the DIO of NI-9401 which is mounted on cRIO.
A standard VI for encoder counting is used and compiled under the FPGA environment.
During the measurement, I observed that there are significant loss count in both encoder direction.
I do not think that there is any problem with the VI as I have used it quite a few times on encoders with RS422 logic output.
Is there any problem with my current encoder in terms of its electrical interface with NI-9401?
Thanks.
Solved!
Go to Solution.

I'm new to labview fpga.
I used the code (attached). with cRIO-9076,NI-9401
Observation:1) ON FPGA VI: Position count value is not incrementing,the values shown are either 0,-1 or 1
                    2) ON HOST VI: As velocity & acceleration calculations are depending on count in fixed velocity interval ,that are also showing random values
Que:
     1. what are floating point to fixed point conversion issues in LV-2102?
     2.what should be the value of velocity fixed interval ?
     3. how can use this velocity data in dc motor pid speed control with NI-9401 without using NI-9505 dc brushed drive?
     4. Is SCTL necessary?
Also: i need information regarding 1.how to create .exe ?
                                                            2.how to make crio standalone ?

Newbie: first time interfacing with existing site

Hi, first post here.
Our company has an existing website that was created several
years ago by someone no longer with the company. It is ColdFusion
based.
For the last few years, I have been in charge of site
management. I have no formal background or training as a webmaster,
so my experience growth has been awkward and unconventional.
I've been doing coding using a text editor to do direct html
manipulation. I then test "live" on our site, usually on a hidden
page. As my company grows, I have not had the time to keep up with
site expansion, and I have yet to date to find a reliable full time
or part time webmaster replacement for me (believe me, I've tried)!
So in the meantime, I have decided to see if I can simplify
my work using Dreamweaver.
So far, I am not off to a great start.
I have downloaded our entire site to our local networked
server in order to have a local architecture mirror. However, since
our local server does not have CF installed, I realize that I
cannot test locally.
I set up remote access to our web server, and Dreamweaver
connects successfully when I test in site management.
However, when I go to "remote view" or "testing server" and
accept the prompt to Get Dependent Files, I always end up with a
partially complete view of the page I want to see, with many
missing elements.
Am I asking too much from Dreamweaver, since in essence I am
asking it to come in and manage a very mature and extensively
developed site after the fact? Is the program able to fully
interface with any established site as long as its programming
language is supported?
Thanks for any basic advice here.
Tod

Sounds like maybe you haven't told us everything. Does your
site use
Coldfusion programming? If so, you can always download the
free
developer version and test locally.
As far as testing HTML locally, you don't need a remote
connection.
You can download the files to your computer and use the
Preview in
Browser to test the pages before you load them. And yes, you
should
be able to scroll up and down and see the entire page if it's
coded
properly.
Or am I totally misunderstanding your question?

How do I use an audio interface with iMovie?

I'm trying to shoot a short clip of a musician playing. I want to use an interface with my higher end mics, and use iMovie '09 to shoot video. I have a Presonus Firebox as my interface. iMovie just doesn't seem to want to recognize it, nor record through it. This isn't something I can share to GarageBand because the timing between the video and audio has to be perfect. Any help?
Thanks

Just buy the proper adapter cord, such as MiniDisplay port to HDMI for example. Plug it in and it will be automatically recognized. Use System Preferences > Displays to set options.
The display can Mirror your primary desktop or Extend the Desktop.
Regards,
Captfred

Interface with Exchange server

Hi i nbeed to write a program to interface with ms exchange dose anyone have any sample code i can look at? i need to extract info such as appointments.

I'll be interested too. I'm writing a java app that would need to read and create calendar appointments, contacts and tasks. The java app is a CRM program, and its database becomes master for the exchange server that would replicate certain information coming from the CRM database/system.
rgds,
David

I have an iTunes account set up long ago on my home pc. My pc at home is antiquated and I can't interface with my account to edit acc. Info. Now I have other devices, iPhone 4 and iPad. I need to reset email apple Id and pw from iPad. How?

I have an iTunes account set up long ago on my home pc. My pc at home is antiquated and I can't interface with my account to edit acc. Info. Now I have other devices, iPhone 4 and iPad. I need to reset email apple Id and pw from iPad. How? Should I just create new account? Don't want to lose 1500 songs.

Hey Frankgates!
I have an article here that can tell you how to do this:
Apple ID: If you forget your password
http://support.apple.com/kb/HT5787
Thanks for coming to the Apple Support Communities!
Regards,
Braden

Does anyone have a suggestion for an alternative to iCal that will interface with the Cloud? I find iCal to be poorly designed and not very efficient.

Does anyone have a suggestion for an alternative to iCal that will interface with the Cloud so it works on the iPhone and the Macbook? I find iCal to be poorly designed and not very efficient. I waste a lot of time entering information because you can't go to a specific day and enter information, nor can you navigate between months and add information on a specific date by clicking on the date. You can't easily scroll month-to-month and once you do by scrolling through nine months to get to where you want to be, you cannot enter information by clicking on a specific day in the month and entering information. I just called Apple and they verified that this is the way it works. You cannot go to a date and enter information, you keep getting thrown back to today and then you have to go into the calendar and change it manually on the screen. It is just not efficient.

APC, CyberPower are reliable.
Look for 1500VA. As example:
APC
http://www.amazon.co.uk/APC-Back-UPS-Pro-1500-Connector/dp/B0041MP81Y/
Cyperpower:
http://www.amazon.co.uk/Dell-CyberPower-Intelligent-LCD-1500VA/dp/B005DL5L50/

HT4623 My iphone will no longer sync with my Mac with Lion operating system which does not interface with the cloud. How do I sync by plugging in?

I have always been able to sync by plugging into my computer Mac OS 10.6.8 which does not interface with icloud. Now my iphone only wants to sync calander and contacts via icloud and will not sync when plugged in. Does any one else have this issue and or ideas?

Do you have the latest version of iTunes? If not, get it at:
http://www.apple.com/itunes

Interfaces with dependency

Similar Messages

Maybe you are looking for