Interfacing R3 and CRM

Hello. Sorry if I don't post in the right section.
In the future weeks, I will have to interface SAP R3 and SAP CRM. Where could I find interesting doc about this?
Thanks

I am doing the same situation.
In this I got stuck at the scenario like creating the recieving module in the R/3 backend.
(which unpacks data transfered in the BAPIMTCS container into the format of R/3).
I am just entering a new field into the master data table.
Can you help me with the suitable FM or User Exit for this purpose?
Please Urgent.

Similar Messages

Can anyone explain the main differences between CRM 2007 and CRM 7?.

Can anyone explain the main differences between CRM 2007 and CRM 7?.
Does CRM 2007 use the WebUI?.
Jason

My fault for not putting my question forward correctly.
I have worked with CRM 7 a few times now, but my experience has jumped me from CRM 5 straight to CRM 7, having never touched CRM 2007.
I now have an opening to work on CRM 2007 so I was intrigued to know what it physically looked like. I assume it does not use the WebUI interface?.
Jas

CRM Interfaces SD with CRM

Hi Gurus,
Can any one Explain SD and CRM Interface with step by step.
Like,
It we do any Transaction in CRM how it will get Update in R/3.?
Or,
If we want Retrive Data from CRM to SD what steps?
Like,
We Maintain Partner Determination Procedure in SD how it will get Uploaded to CRM on what Basis?

Three question, one answer [CRM Middleware|http://help.sap.com/saphelp_crm60/helpdata/en/c3/95fc381478ab6fe10000000a11402f/content.htm] See this SAP Help on the integration of CRM and R/3 (SD).
R/3 and CRM are integrated very nicely and the middleware helps to integrate
Configuration data
Master data
Transaction data
One can do Initial download of all of the above and set up Delta downloads of Master and transaction data (I am not sure about delta of configuration data).
You can also configure the middleware adapter to filter master and transaction data and you can also configure the flow of data - like Business partner data comes from R/3 to CRM and not the reverse. Sales Order changes flow back and forth - this too is configurable.
Pricing procedures, Pricing conditions, Codition records are all downloadable from R/3 into CRM.
There experts who havae spent their whole life time on CRM middleware. Start from the [CRM Middleware help document|http://help.sap.com/saphelp_crm60/helpdata/en/c3/95fc381478ab6fe10000000a11402f/content.htm].
Easwar Ram
http://www.parxlns.com

EDI and CRM

I am looking for any information related to how EDI and CRM work together. We are planning to send EDI orders into CRM and get invoices out of CRM to send back to EDI customers. Is this the 'standard' way of doing things - or do orders typically go into the R3 system and get 'copied' over to CRM? I'm looking for anyone that has been through this process before. What are some of the obstacles, other than the absence of the EDI1 pricing condition? I'm having a difficult time finding any documentation on this so any suggestions will be appreciated.

Laurie,
If you already have an existing EDI setup from R/3, then I would recommend simply uploading orders into CRM. The question will become what is the purpose of the order data in CRM? Are you planning to use CRM billing for all your sales related activities?
A normal scenario when CRM is added to an existing landscape is that orders in the new channel are routed to CRM and existing order interfaces still exist to R/3. The orders if needed in CRM are setup to be uploaded from R/3 to CRM. You will need to setup the initial download of orders from R/3 to CRM. However the key part is based on the intent of usage of the R/3 order depends on how much sosphication you build into the linkage.
The other question to ask is what are you using CRM for? Is it simply for EDI orders or are using it for other channels? If you are simply using CRM for EDI orders, then it is probably a waste of effort to implement CRM. If you are using CRM for more than EDI order processing, then you have some benefit of establishing the EDI connection with CRM.
I am sorry if I can't provide any further details, but if you can explain your current order processing landscape in a little more detail, I can try to point you in the correct direction.
Good luck,
Stephen

Number for bDocs processed per hour in custom interface to SAP CRM from Tibco

Hello Experts,
Could you please let me know the ideal Number for bDocs processed per hour for a interface which has SAP CRM and TIBCO.
The intent is to use to most easy to scale technology for a custom interface to SAP CRM from Tibco .
I did check the forums but was not able to get a definitive answer.
I understand that it is not possible to quantify the exact number of BDocs that can be processed in an hour,but could you please let me know the factors on which it depends.
Regards,
Akash

It depends on type of data you want to process and the size of your hardware. My rule of thumb is that you should be able to do at least 1 BDOC per second in a worst case scenario or 3600 records for a small size system. Keep in mind the biggest bottleneck is the database update/lookup times. A properly sized large system, could do much more volume. Your best bet is put in the desired transactional throughput into the SAP quicksizer and then work with your SAP hardware partner to approriately size your production box.
If you already have hardware for production bought/existing, then find out the current SAPS rating for your hardware and then use the quicksizer to determine the target SAPS needed to meet your requirements.
Take care,
Stephen

Difference between CRM 7.0 and CRM 5.0

Hi Gurus
Whats the Difference between CRM 7.0 and CRM 5.0?
Which one is the latest version in my SAP CRM?
Thanks
Mahi

hi
first up i should tell you version &.0 will be released in this year end
main difference lies between CRM 5.0 and above versions is the user Interface. The whole CRM version has been refined as
1. online Web-enabled.
2. uses the IC Webclient Framework and
3. provides a user frndly inferface.
there are many mutliple functionalities being added inall the CRM modules
but still major differnec i will say is user interface
as u have seen the differemnce between XP and Vista in case of MS operating system
best regards
ashish

External access to Portal and CRM B2B

Hi,
We have the sap portal and also CRM Java ..we have deployed the CRM Business package on the portal and used the portal IView to call the CRM java application. What is the best way to expose both the portal and CRM java to the external users?
I know we can achieve this using sap webdisatcher, but there are certain limitation in sap webdispatcher when dealing with two separte host name..so please let me know how expose both portal and crm to the external users.
Thanks

First of all you need to have your network infrastructure in terms of Security Zones, SAP has a standard recommendation that I have always use when possible for growing your landscape and exposing your Solutions to either internal or external users:
http://help.sap.com/saphelp_nw70/helpdata/en/9d/44d7bc73ddce4f96f09de874350e78/content.htm
Depending on your security needs you can have 2 portals 1 external facing portal and one internal facing portal, or just 1 portal installed in the Inner DMZ , there is no formula is what your Architects prefer and there are pros and cons in any scenario.
Now answering your question you do not need to expose both instances (CRM and Portal) you only need to expose SAP Portal because the purpose of Portal is to provide a single point of access to your u201Cbackendu201D solutions in your case. So Sap Web Dispatcher will be good choice or you can use a Hardware Load Balancing, if this is for external users then you need HA.
Hope this helps.
Juan Jose Alvarado

Generate Prime Interface Availability and Utilization Report for unified APs

Hi,
I´m trying to generate interface availability and interface utilization report for unified APs on Prime Infrastructure 2.0, but it doesn´t display any information. I have created device health and interface health templates under desing/Monitor configuration/My templates and deployed under Deploy/Monitoring deployment, but it still don´t show any information,
thaks for your help.

Hi Alejandro,
Did you solve this problem? Or is it a bug?
I face the some issue with you, I just run "Report/Report Launch Pad/Deivce/Interface Utilization"
and then I create a report for interface utilization.
But it display nothing when the report run finished.
I ask some guys in this forum, they said maybe it's a PI2.1 bug.
BR
Frank

Names of interface tables and interface programs of oracle modules

Hi all,
i need urgent and accurate information about the names of interface tables and interface programs of the following oracle modules,R12, or either ther are custom made. Any accurate link refering to the desire information would be much appreciated.
Plus i need a clear and simple definition and purpose of interface tables and interface program and by what other names are they known in industry.
Data Object,Oracle Module
Chart of Accounts,Oracle General Ledger
Trial Balance,Oracle General Ledger
Supplier Master,Oracle Payables
Open Supplier Invoices,Oracle Payables
Open Supplier Credit/ Debit Memos,Oracle Payables
Open Supplier Advances,Oracle Payables
Bank Master,Oracle Cash Management
Customer Master,Oracle Receivable
Asset Categories,Oracle Assets
Asset Master,Oracle Assets
Item Master,Oracle Inventory
Item Categories,Oracle Inventory
Sub Inventory and Locators,Oracle Inventory
Item On Hand Balances,Oracle Inventory
Item wise Per unit Cost,Oracle Inventory
Bill of Material,Oracle Discrete Manufacturing
Departments,Oracle Discrete Manufacturing
Operations,Oracle Discrete Manufacturing
Routings,Oracle Discrete Manufacturing
Resources,Oracle Discrete Manufacturing
Overheads,Oracle Discrete Manufacturing
Employee Master,Approval Hierarchy
Approval Hierarchy,Approval Hierarchy
Open Customer Invoices,Oracle Receivables
Open Customer Credit/ Debit Memos,Oracle Receivables
Open Customer Advances,Oracle Receivables
Pending Requisitions,Oracle Purchasing
Pending Purchase Orders,Oracle Purchasing
Open Sales Orders,Oracle Order Management
Price List,Oracle Order Management

Hi;
Its metalink note you need to login metalink wiht valid CSI(customer Support Identifier) number to can se note via using note number.
Please see:
Oracle EBS Based and Interface tables
Oracle EBS Based and Interface tables
Regard
Helios

Relationship Between ECC Customers (Contact Persons) and CRM BP

Hello,
I am new to middleware and need some help with the relationship between ECC customers/contact persons and CRM business partners.
We are transferring via bdoc this information from ECC to CRM.
Which bdoc types are used when transferring customers/contact persons? I believe it is BUPA_MAIN but am not too sure. How is the relationship between customer its contact person transferred? Is this done through BUPA_REL? I looked at the segment fields in SBDM but am not too sure how to understand the relationship...
Thanks for the help!
Regards,
Tiffanie

Thanks! With the initial load, how do I check what fields are being passed in the bdocs?
I tried to look for customer_main, customer_rel in SBDM and couldn't find it. Instead I used BUPA_MAIN and found some segments but couldn't find all the data that was being transferred (e.g. customer name, address, etc...) Where do I find all the fields contained in the bdoc?
I see them in SMW01 when I view the bdoc contents but can not find the actual structure (data fields) that are being brought in from ECC.
Thanks!
Tiffanie

Communication between ECC and CRM

Hello,
I am in phase of showing communication between SAP CRM 5.0 and ECC 6.0.
I am struggling with finding some simple transactions which are common in both, with which I can show correct connectivity between ECC and CRM.
I need to save some data from CRM and access the same via transaction within ECC, save some data via ECC and access it via CRM. I already established RFC link between ECC and CRM.
Probably communication between SD module of ECC with CRM.
Can you please help me out with this, a clue/correct direction will be of very helpful. Basically I want to know, what transaction I can use for same.
Any help is really appreciated.
Thanks
-Vishal

Hi Glenn,
I followed all steps in document mentioned above. In the end during execution of transaction I selected appropriate source and destination, when I click start transfer objects, it gets stuck in waiting phase.
Among those steps I was not able to perform step#10. Creating Subscriptions for OLTP. My ERP is not displaying this option under subscription wizard. Should it be reason for not starting transfer ? I also do not see ERP logon screen when I select transfer.
My another question is when transfer will complete, where I'll be able to see transferred objects within ERP database ?
Thanks
-Vishal

CS4 or CS5.5 are interface iphone and andriod apps ?

CS4 or CS5.5 are interface iphone and andriod apps ? How can i do when i make a new web site in DW with support and interface iphone and andriod apps . or we should learn HTML 5 or Wordpress for that ? Thanks !!

Thanks Jeff - ya,sorry, I should've specified. I'm running Win 7 64-bit and I have Production Premium CS4 on the system now. Ideally I would deactivate and uninstall it before I load CS5.5 Production Premium.
My only reasoning is to save on SSD space. Is there any reason to keep CS4 on the machine, other than possible problems with CS5.5?
Thanks again for your reply Jeff.

How to compare the no. items in an order i ERP and CRM?

Hi SAP Experts,
We are facing an issue where the number of line items in an order(same order) in ERP and CRM are different , properly not synchronized.e.g., one order in ERP is having 5 line items but in CRM for the same order has 7 line items.
How to compare and identify the difference in number of line items in ERP and CRM for same orders?
Is there any report or tables , any other way?
Thanks in advance
Best Regards
Succhi

You can use transaction SDIMA for checking if data between crm and erp are synchronized. You can either run a Header comparison or Detailed comparison of the data. It is simple and easy to use. You can find more details here: http://help.sap.com/saphelp_crm70/helpdata/EN/49/2a5a1d6c7f3895e10000000a421937/frameset.htm
Or you can use report CRM_ODE_CHECK_DOC in CRM system to compare sales Documents between R/3 and CRM per transaction type/sales organization or even the transaction number. Also has got options to check transactions Not equal in CRM and R/3.
Regards.

Replication of text determination (business partner) between ERP and CRM

Hello,
in ERP I have maintained a text determination procedure Z1 and assigned it to the text object "KNA1". The textprocedure include the Text ID's "Z011" and "Z020".
In CRM exist the text object "KNA1" and "BUT000". I have customized a a text determination procedure "Z1" and the same Text ID's as in ERP, to booth text objects.
The text ID's don't be replicated, no matter i maintain it in CRM or ERP.
Can anybody tell me, how can I replicate the content of the text ID's? What is the relevant text object in CRM?
Thanks for help
Regards
Andreas

Andrea,
There are objects for replicating the data between CRM and CDB.
CRM_DNL_TTXOB and CRM_DNL_TTXID.
But none for replication between R/3 and CRM. WE need to maintain it manually.
Regards,
Aj.

Middleware on CRM 7.0 for ERP and CRM sales integration

Hi all,
i am involved in a CRM upgrade project in order to repleace the client current release with CRM 7.0.
currently, my client handles sales integration between ERP and CRM using middleware fucntion and in particular SCENARIO A that allows to create sales orders both in the CRM system and in the R/3 system and to change them mutually in both systems.
my question is: new release 7.0 covers all those included functionalities by default without implementing this scenario? If yes, how and what exactly.
thank you in advance and i am looking forward your feed-back
cheers, lucia

Hi Christophe
this can be done. You can call MDM web services for either doing a Free form search or even run a MDM matching strategy to find potential duplicates defined based on rules in MDM.
In one of our projects we have used Web services call from CRM ecommerce portal to MDM for doing a Customer search.
Thanks-Ravi

Interfacing R3 and CRM

Similar Messages

Maybe you are looking for