Interfacing Sick Tim5xx with Myrio USB lidar

Hi. I'm trying to interface a Sick Tim3Xx and tim5xx via USB to the myrio and I'm having no luck getting it identified as a ttyUSB* or Ttyacm*
I see usbdev1.2 in /dev/
And in Mac I see it as a Usb0 raw and it it is "not present"
Is there something I have to do to show it as a TTYUSB0 or can I possibly work with usbdev1.2?
I'm running 2014 firmware and labveiw

Are you sure your device is a USB Serial device? TTYUSB* is usually reserved for serial devices, and it may explain why your device is not showing as expected.
Additionally, have you installed software on your myRIO? You may be missing necessary drivers for serial communication.

Similar Messages

  • Interfacing Sick Tim5xx with Myrio USB

    Hi. I'm trying to interface a Sick Tim3Xx and tim5xx via USB to the myrio and I'm having no luck getting it identified as a ttyUSB* or Ttyacm*
    I see usbdev1.2 in /dev/
    And in Mac I see it as a Usb0 raw and it it is "not present"
    Is there something I have to do to show it as a TTYUSB0 or can I possibly work with usbdev1.2?
    I'm running 2014 firmware and labveiw

    Are you sure your device is a USB Serial device? TTYUSB* is usually reserved for serial devices, and it may explain why your device is not showing as expected.
    Additionally, have you installed software on your myRIO? You may be missing necessary drivers for serial communication.

  • Noises on external USB audio interface (Yamaha MW12) with Snow Leopard

    Hi there,
    I got an issue with strong noises (kind of distortion) while playing all kind of music/sounds ( itunes/Reason/Cubase) via an external USB audio device (Yamaha MW12 mixer).
    Some important facts:
    + This had not been from the very first beginning of changing to snow leopard
    + but never appeared on "leopard"
    + Yamaha mixer is still working fine with my MS-windows computer
    + latest Asio driver by Yamaha is not helping.
    + internal audio of my Mac Book Pro is working fine.
    As this issue just appears 2 days before, without any change or installation on my system, I really wonder, what could be happen. As Yamaha mixer is still working fine with other computer, I expect some driver in MacOS to be the problem (as internal audio HW is working fine).
    Does anybody else, know, what to do? (before I change back to MacOS 10.5)
    Has anybody else have seen a similar issue?
    Thanks for helping in advance.
    Merry christmas,
    Mat
    Message was edited by: d-trich

    Hi,
    just one addon.
    + Changed USB ports on MacBook and it was fine on the second used.
    + Nevertheless, noise remains on the originaly used port
    + all other connected devices as mouse and midi interface are fully functional on both ports
    It still looks like a driver issue. Nevertheless, could it be a hardware issue with the USB port in my MacBook then? Even if all other tried devices are functional?
    cheers, Mat

  • Audio problems with an USB interface

    Hi everyone, this is my first post and glad to finally do it.
    I am so pleased with arch linux, it's just simply amazing. I have learnt a lot following the wikis, it's pretty simple and effective.
    I managed to install and configure ssh server, samba server (surprisingly easy), usb samsung laser printer, nvidia drivers, KDE desktop (so fast in arch), fonts, cpu scaling and I'm so happy with the results and perfomance.
    The only problem I ran into is about audio, I think the wiki on audio is pretty  incomplete (don't get me wrong I enjoy your work).
    The problem is with an USB interface line 6 toneport gx (http://line6.com/toneportgx/), I know the device is meant to be an usb guitar interface but since I don't longer play guitar I use it as soundcard. As complementary information it works with no problem on Ubuntu 10.04 (which is the distro I came from).
    The interface works and it's unmuted since I dmix does not work when I try to play sounds from different sources I had to install pulseaudio. Pulseaudio works partially, the sound was improved and finally I am able to play different sources. The big problem is when high cpu load ocurrs the the audio dies and does not come back even when the cpu loads decrease.
    Any help is appreciated.
    Thanks.

    You may want to debug pulseaudio (check their wiki to see how, involves running pulseaudio in verbose mode) to see what happens.

  • I was recording with a usb mic then i got a audio interface with mic plug ins and i cant get the mic to rec. or even make sound on garageband... help me please

    how can i get my microphone to be detected through my midi device and have garageband be able to pick up the signal so i can record....please help me

    Hi there,
    Perhaps this will help with your problem. I assume that you connected your interface to USB input in your computer. Now, if the connection is correct and this interface is compatible with your computer, your computer will recognize it and accept it so to speak. In my case, when I connected APOGEE duet interface for the first time to my computer, the message window appeared on the screen asking if I want to use this device as input and output. But even though I clicked on "yes", I still had to do necessary adjustment in GarageBand (GB). If after connecting your device there isn't any message on the screen of your computer, go to System Preferences on the dock, open it, click on Speaker (sound) icon and see if the name of your device is there. If everything is OK, it should be there under input and output. Assuming that it's there, open GB, choose any project that you already have, if you don't have anything yet, create a new one. You don't have to record anything at this time. So after you open any project, click on GarageBand on menu bar in upper left corner of your screen, then click on Preferences, then on Audio/MIDI right after General. When you open Audio/MIDI you'll see two "windows", one for audio output, other for audio input. When you click on these little black arrows in both "windows" you should see your interface listed there, if it's there, choose it as input and output. Now you're set and ready to go. If you have MIDI device connected to your computer it'll also show there. For example, 0 MIDI Input(s) detected if you don't have any devices connected, or 1, or 2 MIDI Input(s) detected and so on. Hope this will help.
    Cheers!

  • Is there an audio interface for Imac with Leopard???

    Hi Guys,
    Im new here. Just got my IMac 24" 2.8ghz 10.5.1 Leopard last week. I love everything about it but Im having a real hard time finding an audio interface to use with Garageband. I tried the M-Audio Firewire Solo...found out quick it is not compatible. So I figure what the ** i'll downgrade and go with the M-Audio Mobilepre USB audio interface...usb, no fuss no muss right...WRONG! It doesnt work either! I tried downloading the most current driver from M-audio's website but still no go. I guess Leopard and intel machines are hard to please. Also the audio interface has to have phantom power to run a condensor mic. So my questions to you guys is this:
    1. Are there any other audio interface options out there with phantom power for $200 or less that will run with my Imac ?
    2. If not, why in the ** would Apple design a machine with Garageband then not set it up to accept any reasonably priced audio interface currently on the market? Tell me Im just uninformed...say it isnt so!
    Sorry if it sounds like Im aggravated...I am! I had hoped to get some recording time in this weekend but its looking doubtful now.
    I did post this in the Garageband discussion as well...thanks.
    Any help with the mobile preamp, other interface recommendations, etc. are greatly appreciated!
    Paul

    Dr. Pee wrote:
    Any help with the mobile preamp, other interface recommendations
    Could you be a little more specific about what you mean
    by "not compatible" -- is it a lack of Leopard drivers,
    or what?
    I haven't fiddled with GarageBand, but I have been using
    [M-Audio's Fast Track Pro|http://www.m-audio.com/products/en_us/FastTrackPro-main.html] with audacity, and it seems to
    work OK. (My beta-release ov audacity has some stability
    problems, but I don't think they're M-Audio-related.)
    Did you check M-Audio's web site for Leopard-compatible
    drivers? The one for Fast Track Pro wasn't released 'til
    mid December, if I remember correctly.
    Although firewire is probably technically superior, I
    went with USB to avoid conflicts between the audio box
    and my Firewire external HD. There have been too many
    reports of flakey operation with iMac firewire drivers.
    I like the Fast Track Pro, but I'm not sure it would
    be my first choice if I had it to do over. It's main
    drawback is that it's USB 1.1 -- so, there are some
    tradeoffs in the number of simultaneous I/O channels
    versus data rate and resolution.
    I've listed a few other USB options worth exploring
    below -- I believe they all have phantom power:
    [E-Mu 0404 USB|http://www.emu.com/products/product.asp?category=610&subcategory=611&produc t=15185]
    [Edirol UA-25|http://www.rolandus.com/products/productdetails.aspx?ObjectId=704&ParentI d=114]
    [Line6 TonePort UX2|http://line6.com/toneportux2>
    I'm not sure what the situation is WRT Leopard-compatible
    drivers for any of the above -- you'll have to check the
    manufacturers' web sites.
    Check amazon.com and MusiciansFriend.com for prices; also,
    be sure to check the customer comments on MusiciansFriend.
    They're often very thorough and informative -- typically
    much better than Amazon's.
    ...rock on!
    Looby

  • My Apple desktop computer, 2.4 GHz Intel duo core, OS 10.6.8, stopped recognizing the WD My Book connected via firewire. It works fine with the USB port so it's not the drive. Help please.

    My Apple desktop computer, 2.4 GHz Intel duo core, OS 10.6.8, stopped recognizing the WD My Book connected via firewire. It works fine with the USB port so it's not the drive. Help please?

    It can be the bridge. It could need firmware update. or the FW ports may be an issue. LaCie seemed to invent the phrase/tip 'resetting firewire ports' due to the issues with their drive cases.
    You can try an SMC Reset.
    So far I have avoided name-brand and tend to see them mentioned. Often with a new OS (though you are on 10.6.8, but when 10.6 came out there was a common complaint and thread of users: FW or USB worked but not the other interface).

  • Mobilepre audio interface not working with logic express 8

    I have been using an M-AUDIO usb interface for garageband for the last year,i recently installed logic express 8 and i just can't get any sound whilst trying to record,logic displays a signal in the channel strip but no sound comes from my monitors,only when i plug the ear phones into the interface can i hear what i'm recording.I've tried every trouble shooting option in my apple pro training book like monitoring and audio preferences.I've contacted M-AUDIO but they just put me on hold as if there really busy!!!
    in the end M-audio emailed me and blamed logic,they told me to contact apple,W@**ERS!!
    I'm new to this apple discussions business and hope someone can help!!
    ps the interface works fine with garageband
    cheers c

    callummccall wrote:
    I have been using an M-AUDIO usb interface for garageband for the last year,i recently installed logic express 8 and i just can't get any sound whilst trying to record,logic displays a signal in the channel strip but no sound comes from my monitors,only when i plug the ear phones into the interface can i hear what i'm recording.
    Welcome to the wonderful world of M-Audio!!! Now, what you are doing is perfectly NORMAL. You need to hook up speakers to your audio interface. Where the little diagram says so:
    http://www.m-audio.com/layout/imgview.php?i=/images/en/connectivity/big/mobilepr eusbcd779px.gif
    See? The reason this is so, is because when you are using this interface, you are BOTH using the inputs AND outputs. Logic always works like this, it is a requirement to use "a full-duplex sound card" which means a sound card that has inputs and outputs.
    I've tried every trouble shooting option in my apple pro training book like monitoring and
    audio preferences.I've contacted M-AUDIO but they just put me on hold as if there really busy!!!
    in the end M-audio emailed me and blamed logic,they told me to contact apple,W@**ERS!!
    I'm new to this apple discussions business and hope someone can help!!
    ps the interface works fine with garageband
    cheers c
    M-audio blaming everyone else is not new, however, your "issue" is a user issue, not a gear issue.
    Cheers

  • Software installation external audio interface fails Terratec dmx6 fire usb

    Software installation external audio interface fails Terratec dmx6 fire usb.
    Dear Apple Power User in this forum,
    here is a question for some of us experts.
    I have a external usb audio interface Terratec, Model: DMX 6 fire USB.
    http://www.terratec.net/en/products/technical-data/produktetechnische_daten_en3246.html
    0. There should be after install enclosing software an control app in the app folder, but it isnt there. Why?
    1. the attached installer protocol seems to be normal. isnt it?
    2. the usb audio hardware appears in system profiler.
    3. there isnt the audio hardware in audio-midi-setup! Why?
    4. one of the installed content is visibil in activity monitor as an extension "35 DMX6FireService root 0,0 1 964,00 KB 18,55 MB 22 Intel 00.01 176,00 KB 184,00 KB 73 72"
    5. an other part is in the system-library-extension folder "TTDMX6fire.kext"
    6. other files i am not capacity to find....
    7. and there is the app missing in apps folder! Whitout that it can not work.
    8. Software is for 10.5 and 10.6 32-bit tested from the vendor!?
    9. My MacBookPro early 2008 2.4ghz is capabel of 64bit but is default in 32 mode says apple spec, also my osx 10.5.8 newest updates should be 32 bit. Isnt it?
    10. installation tested whit disconnected/connected ext. volumes or display or these audio interface, whith repaired permissions, on two different macs (second is iMac), whit reboot,
    11. tested on different usb ports, usb port test passed whith other equipment,
    12. on windows xp all works.
    13. tested on a new admin user, same problem.
    14. searched whith terminal command line in applications, nothing.
    15. get software from cd and homepage, no effect.
    16. asked vendor: "until now never had problems like that"
    any ideas? please help!
    for testing or showing the installer look here:
    http://www.terratec.net/en/driver-and-support/driver_21300.html?selectproduct=DM X%206Fire%20USB
    Installation Protocol:
    Dec 25 00:08:39 cadas-macbook-pro /System/Library/CoreServices/Installer.app/Contents/MacOS/Installer[400]: vm_allocate: 0, 0x5800000 - 0x25800000
    Dec 25 00:08:39 cadas-macbook-pro /System/Library/CoreServices/Installer.app/Contents/MacOS/Installer[400]: vm_protect: 0
    Dec 25 00:08:39 cadas-macbook-pro Installer[400]: @(#)PROGRAM:Install PROJECT:Install-388
    Dec 25 00:08:39 cadas-macbook-pro Installer[400]: @(#)PROGRAM:Installer PROJECT:Installer-281
    Dec 25 00:08:39 cadas-macbook-pro Installer[400]: Hardware: MacBookPro4,1 @ 2.40 GHz (x 2), 4096 MB RAM
    Dec 25 00:08:39 cadas-macbook-pro Installer[400]: Running OS Build: Mac OS X 10.5.8 (9L30)
    Dec 25 00:08:39 cadas-macbook-pro Installer[400]: Env: PATH=/usr/bin:/bin:/usr/sbin:/sbin
    Dec 25 00:08:39 cadas-macbook-pro Installer[400]: Env: TMPDIR=/var/folders/gC/gCDdYZuFE98Z28wIB40BeE+TI/-Tmp-/
    Dec 25 00:08:39 cadas-macbook-pro Installer[400]: Env: SHELL=/bin/bash
    Dec 25 00:08:39 cadas-macbook-pro Installer[400]: Env: HOME=/Users/cada
    Dec 25 00:08:39 cadas-macbook-pro Installer[400]: Env: USER=cada
    Dec 25 00:08:39 cadas-macbook-pro Installer[400]: Env: LOGNAME=cada
    Dec 25 00:08:39 cadas-macbook-pro Installer[400]: Env: DISPLAY=/tmp/launch-MQSZjG/:0
    Dec 25 00:08:39 cadas-macbook-pro Installer[400]: Env: SSHAUTHSOCK=/tmp/launch-x3IAC1/Listeners
    Dec 25 00:08:39 cadas-macbook-pro Installer[400]: Env: ApplePubSub_SocketRender=/tmp/launch-YalWkk/Render
    Dec 25 00:08:39 cadas-macbook-pro Installer[400]: Env: _CF_USER_TEXTENCODING=0x1F5:0:3
    Dec 25 00:08:39 cadas-macbook-pro Installer[400]: Env: SECURITYSESSIONID=a1b410
    Dec 25 00:08:39 cadas-macbook-pro Installer[400]: Env: COMMAND_MODE=unix2003
    Dec 25 00:08:39 cadas-macbook-pro Installer[400]: DMX6fireUSB Installation Log
    Dec 25 00:08:39 cadas-macbook-pro Installer[400]: Opened from: /Volumes/DMX6FireUSB.1.22/dmx6fireusb.pkg
    Dec 25 00:08:39 cadas-macbook-pro installdb[402]: started (uid 96)
    Dec 25 00:08:39 cadas-macbook-pro installdb[402]: Opened receipt database on '/' with schema 17.
    Dec 25 00:08:45 cadas-macbook-pro installdb[402]: done. (0.004u + 0.003s)
    Dec 25 00:09:10 cadas-macbook-pro runner[403]: Administrator authorization granted.
    Dec 25 00:09:15 cadas-macbook-pro Installer[400]: =============================================================================== =
    Dec 25 00:09:15 cadas-macbook-pro Installer[400]: User picked Standard Install
    Dec 25 00:09:15 cadas-macbook-pro Installer[400]: Choices selected for installation:
    Dec 25 00:09:15 cadas-macbook-pro Installer[400]: Aktualisieren: "DMX6fireUSB"
    Dec 25 00:09:15 cadas-macbook-pro Installer[400]: Aktualisieren: "DMX6FireUSBCpl"
    Dec 25 00:09:15 cadas-macbook-pro Installer[400]: dmx6fireusb.pkg#dmx6fireusbcpl.pkg : com.terratec.dmx6fireusb.pkg : 1
    Dec 25 00:09:15 cadas-macbook-pro Installer[400]: dmx6fireusb.pkg#ttdmx6fire.pkg : com.terratec.dmx6fireusb1.pkg : 1
    Dec 25 00:09:15 cadas-macbook-pro Installer[400]: Aktualisieren: "TTDMX_6fire_CUSTOMEXT"
    Dec 25 00:09:15 cadas-macbook-pro Installer[400]: dmx6fireusb.pkg#ttdmx6firecustomext.pkg : com.terratec.dmx6fireusb2.pkg : 1
    Dec 25 00:09:15 cadas-macbook-pro Installer[400]: Aktualisieren: "TTDMX6fire"
    Dec 25 00:09:15 cadas-macbook-pro Installer[400]: dmx6fireusb.pkg#ttdmx6fire-1.pkg : com.terratec.dmx6fireusb3.pkg : 1
    Dec 25 00:09:15 cadas-macbook-pro Installer[400]: Aktualisieren: "DMX6FireService"
    Dec 25 00:09:15 cadas-macbook-pro Installer[400]: dmx6fireusb.pkg#dmx6fireservice.pkg : com.terratec.dmx6fireservice3.pkg : 1
    Dec 25 00:09:15 cadas-macbook-pro Installer[400]: Aktualisieren: "LaunchDaemon"
    Dec 25 00:09:15 cadas-macbook-pro Installer[400]: dmx6fireusb.pkg#comterratecdmx6fire.pkg : com.terratec.dmx6fireusb4.pkg : 1
    Dec 25 00:09:15 cadas-macbook-pro Installer[400]: =============================================================================== =
    Dec 25 00:09:15 cadas-macbook-pro Installer[400]: It took 0.00 seconds to summarize the package selections.
    Dec 25 00:09:15 cadas-macbook-pro Installer[400]: -[IFDInstallController(Private) _buildInstallPlan]: location = file://localhost
    Dec 25 00:09:15 cadas-macbook-pro Installer[400]: -[IFDInstallController(Private) _buildInstallPlan]: file://localhost/Volumes/DMX6FireUSB.1.22/dmx6fireusb.pkg#dmx6fireusbcpl.pkg
    Dec 25 00:09:15 cadas-macbook-pro Installer[400]: -[IFDInstallController(Private) _buildInstallPlan]: file://localhost/Volumes/DMX6FireUSB.1.22/dmx6fireusb.pkg#ttdmx6fire.pkg
    Dec 25 00:09:15 cadas-macbook-pro Installer[400]: -[IFDInstallController(Private) _buildInstallPlan]: file://localhost/Volumes/DMX6FireUSB.1.22/dmx6fireusb.pkg#ttdmx6firecustomext.pk g
    Dec 25 00:09:15 cadas-macbook-pro Installer[400]: -[IFDInstallController(Private) _buildInstallPlan]: file://localhost/Volumes/DMX6FireUSB.1.22/dmx6fireusb.pkg#ttdmx6fire-1.pkg
    Dec 25 00:09:15 cadas-macbook-pro Installer[400]: -[IFDInstallController(Private) _buildInstallPlan]: file://localhost/Volumes/DMX6FireUSB.1.22/dmx6fireusb.pkg#dmx6fireservice.pkg
    Dec 25 00:09:15 cadas-macbook-pro Installer[400]: -[IFDInstallController(Private) _buildInstallPlan]: file://localhost/Volumes/DMX6FireUSB.1.22/dmx6fireusb.pkg#comterratecdmx6fire.pk g
    Dec 25 00:09:15 cadas-macbook-pro Installer[400]: _installNextPackage of 1
    Dec 25 00:09:15 cadas-macbook-pro installdb[405]: started (uid 96)
    Dec 25 00:09:15 cadas-macbook-pro installdb[405]: Opened receipt database on '/' with schema 17.
    Dec 25 00:09:15 cadas-macbook-pro Installer[400]: Starting installation:
    Dec 25 00:09:15 cadas-macbook-pro Installer[400]: Preparing volume "250GB_MBPro2" for installation
    Dec 25 00:09:15 cadas-macbook-pro Installer[400]: Configuring volume "250GB_MBPro2"
    Dec 25 00:09:16 cadas-macbook-pro Installer[400]: Preparing disk for local booted install.
    Dec 25 00:09:16 cadas-macbook-pro Installer[400]: Free space on "250GB_MBPro2": 11,6 GB (12495523840 bytes).
    Dec 25 00:09:16 cadas-macbook-pro Installer[400]: Create temporary directory "/private/tmp/dmx6fireusb.pkg.400aysS6s"
    Dec 25 00:09:16 cadas-macbook-pro Installer[400]: Running install actions
    Dec 25 00:09:16 cadas-macbook-pro Installer[400]: Processing dmx6fireusbcpl:
    Dec 25 00:09:16 cadas-macbook-pro Installer[400]: Determining files to install
    Dec 25 00:09:16 cadas-macbook-pro Installer[400]: It took 0.06 seconds to create the install plan for dmx6fireusbcpl.
    Dec 25 00:09:16 cadas-macbook-pro Installer[400]: Configuring deferred files
    Dec 25 00:09:16 cadas-macbook-pro Installer[400]: Determining obsolete files
    Dec 25 00:09:16 cadas-macbook-pro Installer[400]: Assembling temporary receipt
    Dec 25 00:09:16 cadas-macbook-pro Installer[400]: Performing pre-extraction actions
    Dec 25 00:09:16 cadas-macbook-pro Installer[400]: run preupgrade script for dmx6fireusbcpl
    Dec 25 00:09:17 cadas-macbook-pro /private/tmp/scripts.pCJk/./preflight[408]: : deleting previous Kernel Extensions
    Dec 25 00:09:17 cadas-macbook-pro /private/tmp/scripts.pCJk/./preflight[408]: PID: 43
    Dec 25 00:09:17 cadas-macbook-pro Installer[400]: Removing obsoleted files
    Dec 25 00:09:17 cadas-macbook-pro Installer[400]: Creating destination path
    Dec 25 00:09:17 cadas-macbook-pro Installer[400]: Validating package payload
    Dec 25 00:09:17 cadas-macbook-pro Installer[400]: Starting file extraction
    Dec 25 00:09:17 cadas-macbook-pro payloadExtractor[419]: Initializing new flat-package receipt.
    Dec 25 00:09:17 cadas-macbook-pro payloadExtractor[419]: Extracting...
    Dec 25 00:09:17 cadas-macbook-pro payloadExtractor[419]: 20 of 20 files written in 0.05 seconds.
    Dec 25 00:09:17 cadas-macbook-pro payloadExtractor[419]: 408 kilobytes installed at 7.5 MB/s.
    Dec 25 00:09:17 cadas-macbook-pro Installer[400]: Performing post-extraction actions
    Dec 25 00:09:17 cadas-macbook-pro Installer[400]: Finishing receipt
    Dec 25 00:09:17 cadas-macbook-pro runner[403]: Extracting BOM from "/Volumes/DMX6FireUSB.1.22/dmx6fireusb.pkg" to "/Library/Receipts/boms/com.terratec.dmx6fireusb.pkg.bom"
    Dec 25 00:09:17 cadas-macbook-pro Installer[400]: Processing ttdmx6fire:
    Dec 25 00:09:17 cadas-macbook-pro Installer[400]: Determining files to install
    Dec 25 00:09:17 cadas-macbook-pro Installer[400]: It took 0.03 seconds to create the install plan for ttdmx6fire.
    Dec 25 00:09:17 cadas-macbook-pro Installer[400]: Configuring deferred files
    Dec 25 00:09:17 cadas-macbook-pro Installer[400]: Determining obsolete files
    Dec 25 00:09:17 cadas-macbook-pro Installer[400]: Assembling temporary receipt
    Dec 25 00:09:17 cadas-macbook-pro Installer[400]: Performing pre-extraction actions
    Dec 25 00:09:17 cadas-macbook-pro Installer[400]: Removing obsoleted files
    Dec 25 00:09:17 cadas-macbook-pro Installer[400]: Creating destination path
    Dec 25 00:09:17 cadas-macbook-pro Installer[400]: Validating package payload
    Dec 25 00:09:17 cadas-macbook-pro Installer[400]: Starting file extraction
    Dec 25 00:09:17 cadas-macbook-pro payloadExtractor[420]: Initializing new flat-package receipt.
    Dec 25 00:09:17 cadas-macbook-pro payloadExtractor[420]: Extracting...
    Dec 25 00:09:17 cadas-macbook-pro payloadExtractor[420]: 9 of 9 files written in 0.01 seconds.
    Dec 25 00:09:17 cadas-macbook-pro payloadExtractor[420]: 92 kilobytes installed at 11.5 MB/s.
    Dec 25 00:09:17 cadas-macbook-pro Installer[400]: Performing post-extraction actions
    Dec 25 00:09:17 cadas-macbook-pro Installer[400]: Finishing receipt
    Dec 25 00:09:17 cadas-macbook-pro runner[403]: Extracting BOM from "/Volumes/DMX6FireUSB.1.22/dmx6fireusb.pkg" to "/Library/Receipts/boms/com.terratec.dmx6fireusb1.pkg.bom"
    Dec 25 00:09:17 cadas-macbook-pro Installer[400]: Processing ttdmx6firecustomext:
    Dec 25 00:09:17 cadas-macbook-pro Installer[400]: Determining files to install
    Dec 25 00:09:17 cadas-macbook-pro Installer[400]: It took 0.00 seconds to create the install plan for ttdmx6firecustomext.
    Dec 25 00:09:17 cadas-macbook-pro Installer[400]: Configuring deferred files
    Dec 25 00:09:17 cadas-macbook-pro Installer[400]: Determining obsolete files
    Dec 25 00:09:17 cadas-macbook-pro Installer[400]: Assembling temporary receipt
    Dec 25 00:09:17 cadas-macbook-pro Installer[400]: Performing pre-extraction actions
    Dec 25 00:09:17 cadas-macbook-pro Installer[400]: Removing obsoleted files
    Dec 25 00:09:17 cadas-macbook-pro Installer[400]: Creating destination path
    Dec 25 00:09:17 cadas-macbook-pro Installer[400]: Validating package payload
    Dec 25 00:09:17 cadas-macbook-pro Installer[400]: Starting file extraction
    Dec 25 00:09:17 cadas-macbook-pro payloadExtractor[421]: Initializing new flat-package receipt.
    Dec 25 00:09:17 cadas-macbook-pro payloadExtractor[421]: Extracting...
    Dec 25 00:09:17 cadas-macbook-pro payloadExtractor[421]: 9 of 9 files written in 0.01 seconds.
    Dec 25 00:09:17 cadas-macbook-pro payloadExtractor[421]: 80 kilobytes installed at 9.7 MB/s.
    Dec 25 00:09:17 cadas-macbook-pro Installer[400]: Performing post-extraction actions
    Dec 25 00:09:17 cadas-macbook-pro Installer[400]: Finishing receipt
    Dec 25 00:09:17 cadas-macbook-pro runner[403]: Extracting BOM from "/Volumes/DMX6FireUSB.1.22/dmx6fireusb.pkg" to "/Library/Receipts/boms/com.terratec.dmx6fireusb2.pkg.bom"
    Dec 25 00:09:17 cadas-macbook-pro Installer[400]: Processing ttdmx6fire-1:
    Dec 25 00:09:17 cadas-macbook-pro Installer[400]: Determining files to install
    Dec 25 00:09:17 cadas-macbook-pro Installer[400]: It took 0.00 seconds to create the install plan for ttdmx6fire-1.
    Dec 25 00:09:17 cadas-macbook-pro Installer[400]: Configuring deferred files
    Dec 25 00:09:17 cadas-macbook-pro Installer[400]: Determining obsolete files
    Dec 25 00:09:17 cadas-macbook-pro Installer[400]: Assembling temporary receipt
    Dec 25 00:09:17 cadas-macbook-pro Installer[400]: Performing pre-extraction actions
    Dec 25 00:09:17 cadas-macbook-pro Installer[400]: run preupgrade script for ttdmx6fire-1
    Dec 25 00:09:17 cadas-macbook-pro /private/tmp/scripts.MEBZ/./preflight[424]: : deleting previous Kernel Extensions
    Dec 25 00:09:17 cadas-macbook-pro /private/tmp/scripts.MEBZ/./preflight[424]: PID:
    Dec 25 00:09:17 cadas-macbook-pro Installer[400]: Removing obsoleted files
    Dec 25 00:09:17 cadas-macbook-pro Installer[400]: Creating destination path
    Dec 25 00:09:17 cadas-macbook-pro Installer[400]: Validating package payload
    Dec 25 00:09:17 cadas-macbook-pro Installer[400]: Starting file extraction
    Dec 25 00:09:17 cadas-macbook-pro payloadExtractor[435]: Initializing new flat-package receipt.
    Dec 25 00:09:17 cadas-macbook-pro payloadExtractor[435]: Extracting...
    Dec 25 00:09:17 cadas-macbook-pro payloadExtractor[435]: 9 of 9 files written in 0.03 seconds.
    Dec 25 00:09:17 cadas-macbook-pro payloadExtractor[435]: 832 kilobytes installed at 26.2 MB/s.
    Dec 25 00:09:17 cadas-macbook-pro Installer[400]: Performing post-extraction actions
    Dec 25 00:09:17 cadas-macbook-pro Installer[400]: Finishing receipt
    Dec 25 00:09:17 cadas-macbook-pro runner[403]: Extracting BOM from "/Volumes/DMX6FireUSB.1.22/dmx6fireusb.pkg" to "/Library/Receipts/boms/com.terratec.dmx6fireusb3.pkg.bom"
    Dec 25 00:09:17 cadas-macbook-pro Installer[400]: Processing dmx6fireservice:
    Dec 25 00:09:17 cadas-macbook-pro Installer[400]: Determining files to install
    Dec 25 00:09:17 cadas-macbook-pro Installer[400]: It took 0.00 seconds to create the install plan for dmx6fireservice.
    Dec 25 00:09:17 cadas-macbook-pro Installer[400]: Configuring deferred files
    Dec 25 00:09:17 cadas-macbook-pro Installer[400]: Determining obsolete files
    Dec 25 00:09:17 cadas-macbook-pro Installer[400]: Assembling temporary receipt
    Dec 25 00:09:17 cadas-macbook-pro Installer[400]: Performing pre-extraction actions
    Dec 25 00:09:17 cadas-macbook-pro Installer[400]: Removing obsoleted files
    Dec 25 00:09:17 cadas-macbook-pro Installer[400]: Creating destination path
    Dec 25 00:09:17 cadas-macbook-pro Installer[400]: Validating package payload
    Dec 25 00:09:17 cadas-macbook-pro Installer[400]: Starting file extraction
    Dec 25 00:09:18 cadas-macbook-pro payloadExtractor[437]: Initializing new flat-package receipt.
    Dec 25 00:09:18 cadas-macbook-pro payloadExtractor[437]: Extracting...
    Dec 25 00:09:18 cadas-macbook-pro payloadExtractor[437]: 2 of 2 files written in 0.01 seconds.
    Dec 25 00:09:18 cadas-macbook-pro payloadExtractor[437]: 136 kilobytes installed at 13.4 MB/s.
    Dec 25 00:09:18 cadas-macbook-pro Installer[400]: Performing post-extraction actions
    Dec 25 00:09:18 cadas-macbook-pro Installer[400]: Finishing receipt
    Dec 25 00:09:18 cadas-macbook-pro runner[403]: Extracting BOM from "/Volumes/DMX6FireUSB.1.22/dmx6fireusb.pkg" to "/Library/Receipts/boms/com.terratec.dmx6fireservice3.pkg.bom"
    Dec 25 00:09:18 cadas-macbook-pro Installer[400]: Processing comterratecdmx6fire:
    Dec 25 00:09:18 cadas-macbook-pro Installer[400]: Determining files to install
    Dec 25 00:09:18 cadas-macbook-pro Installer[400]: It took 0.00 seconds to create the install plan for comterratecdmx6fire.
    Dec 25 00:09:18 cadas-macbook-pro Installer[400]: Configuring deferred files
    Dec 25 00:09:18 cadas-macbook-pro Installer[400]: Determining obsolete files
    Dec 25 00:09:18 cadas-macbook-pro Installer[400]: Assembling temporary receipt
    Dec 25 00:09:18 cadas-macbook-pro Installer[400]: Performing pre-extraction actions
    Dec 25 00:09:18 cadas-macbook-pro Installer[400]: Removing obsoleted files
    Dec 25 00:09:18 cadas-macbook-pro Installer[400]: Creating destination path
    Dec 25 00:09:18 cadas-macbook-pro Installer[400]: Validating package payload
    Dec 25 00:09:18 cadas-macbook-pro Installer[400]: Starting file extraction
    Dec 25 00:09:18 cadas-macbook-pro payloadExtractor[438]: Initializing new flat-package receipt.
    Dec 25 00:09:18 cadas-macbook-pro payloadExtractor[438]: Extracting...
    Dec 25 00:09:18 cadas-macbook-pro payloadExtractor[438]: 2 of 2 files written in 0.01 seconds.
    Dec 25 00:09:18 cadas-macbook-pro payloadExtractor[438]: 8 kilobytes installed at 1.0 MB/s.
    Dec 25 00:09:18 cadas-macbook-pro Installer[400]: Performing post-extraction actions
    Dec 25 00:09:18 cadas-macbook-pro Installer[400]: Finishing receipt
    Dec 25 00:09:18 cadas-macbook-pro runner[403]: Extracting BOM from "/Volumes/DMX6FireUSB.1.22/dmx6fireusb.pkg" to "/Library/Receipts/boms/com.terratec.dmx6fireusb4.pkg.bom"
    Dec 25 00:09:18 cadas-macbook-pro Installer[400]: Removing temporary directory "/private/tmp/dmx6fireusb.pkg.400aysS6s"
    Dec 25 00:09:18 cadas-macbook-pro Installer[400]: Finalize disk "250GB_MBPro2"
    Dec 25 00:09:18 cadas-macbook-pro Installer[400]: Notifying system of updated components
    Dec 25 00:09:18 cadas-macbook-pro runner[403]: Touched '/System/Library/Extensions'
    Dec 25 00:09:18 cadas-macbook-pro Installer[400]: _installNextPackage of 0
    Dec 25 00:09:18 cadas-macbook-pro Installer[400]:
    Dec 25 00:09:18 cadas-macbook-pro Installer[400]: ** Summary Information **
    Dec 25 00:09:18 cadas-macbook-pro Installer[400]: Operation Elapsed time
    Dec 25 00:09:18 cadas-macbook-pro Installer[400]: -----------------------------
    Dec 25 00:09:18 cadas-macbook-pro Installer[400]: script 0.29 seconds
    Dec 25 00:09:18 cadas-macbook-pro Installer[400]: zero 0.02 seconds
    Dec 25 00:09:18 cadas-macbook-pro Installer[400]: install 1.42 seconds
    Dec 25 00:09:18 cadas-macbook-pro Installer[400]: validate 0.01 seconds
    Dec 25 00:09:18 cadas-macbook-pro Installer[400]: os 0.00 seconds
    Dec 25 00:09:18 cadas-macbook-pro Installer[400]: extract 0.87 seconds
    Dec 25 00:09:18 cadas-macbook-pro Installer[400]: receipt 0.05 seconds
    Dec 25 00:09:18 cadas-macbook-pro Installer[400]: disk 1.01 seconds
    Dec 25 00:09:18 cadas-macbook-pro Installer[400]: config 0.19 seconds
    Dec 25 00:09:18 cadas-macbook-pro Installer[400]:
    Dec 25 00:09:18 cadas-macbook-pro Installer[400]: Starting installation:
    Dec 25 00:09:18 cadas-macbook-pro Installer[400]: Finalizing installation.
    Dec 25 00:09:18 cadas-macbook-pro Installer[400]: Registering applications
    Dec 25 00:09:18 cadas-macbook-pro runner[403]: Touched '/Applications/./DMX6FireUSBCpl.app'
    Dec 25 00:09:18 cadas-macbook-pro runner[403]: Touched '/Applications/.'
    Dec 25 00:09:19 cadas-macbook-pro Installer[400]: IFDInstallController 868C80 state = 5
    Dec 25 00:09:19 cadas-macbook-pro Installer[400]: Displaying 'Install Succeeded' UI.
    Dec 25 00:09:24 cadas-macbook-pro installdb[405]: done. (0.026u + 0.040s)

    solved whith the old driver vom archive of vendor: "DMX6Fire_USBMac.1.00c.dmg" thats for 10.5.x for me works.
    The newest from the vendor delivered driver 1.22 (marked for 10.5 and 10.6) seems to not work under 10.5.

  • Hi i got a mac mini but when i connect it to my smartax mt882 modem via ethernet it says device not connected can anyone solve this issue it work fine with the usb connection but the ethernet is giving me problems plz help

    hi i got a mac mini but when i connect it to my smartax mt882 modem via ethernet it says device not connected can anyone solve this issue it work fine with the usb connection but the ethernet is giving me problems plz help

    Hello, give this a try...
    Make a New Location, Using network locations in Mac OS X ...
    http://support.apple.com/kb/HT2712
    10.5, 10.6, 10.7 & 10.8…
    System Preferences>Network, top of window>Locations>Edit Locations, little plus icon, give it a name.
    10.5.x/10.6.x/10.7.x/10.8.x instructions...
    System Preferences>Network, click on the little gear at the bottom next to the + & - icons, (unlock lock first if locked), choose Set Service Order.
    The interface that connects to the Internet should be dragged to the top of the list.
    For 10.5/10.6/10.7/10.8, System Preferences>Network, unlock the lock if need be, highlight the Interface you use to connect to Internet, click on the advanced button, click on the DNS tab, click on the little plus icon, then add these numbers...
    208.67.222.222
    208.67.220.220
    (There may be better or faster DNS numbers in your area, but these should be a good test).
    Click OK.

  • Digital Camcorder & router/Airport USB 2.0 to connect eMac with only USB 1

    I've looked around and asked many sources, only to come to the same conclusion that I already thought I knew... no way to go from USB 2.0 through another interface to use firewire on an eMac with only USB 1.1.
    I'm curious if anyone has connected a router with a USB 2.0 to an older mac, eMac and/or TiBook in my case via ethernet so that a digital camcorder might appear under the ip-based items available from the router?
    there is no reason, other than it being painfully slow over USB 1.1 to think beyond the eMac as it otherwise does every task necessary for my in-laws perfectly. never had a single problem that wasn't caused by their inexperience with a computer, which also makes using a mac so much easier to troubleshoot and fix. they just bought a nice digital hdd (hard disk drive, not hd res) camcorder that communicates via USB 2.0 (as almost all do nowadays).
    will any router, or more-specifically an Airport router, be able to communicate with the camcorder via its own USB 2.0 interface and then distribute that data over ethernet to the eMac, or would the router be hamstrung by the same USB 1.1 bottleneck that would affect it if done directly.
    I'm also open to other alternatives... I haven't had a chance to play with the camcorder yet, but I imagine that it will somehow mount to the desktop were it able to comm via 2.0. any thoughts?
    cheers,
    - jeremy

    hi duane,
    thanks for the quick reply. excellent info.
    i noticed that your email said more than the post, did you edit out the last statement, as that was what i was going to comment on...?
    my digi camcorder, a tape-based model, does show up like a volume on the desktop, but i wasn't sure of the new hd-based one that my in-laws purchased would. i am able to see the other not just in imovie, so perhps it will mount in the usb port of a router. i don't have an AEBS, but would purchase one specifically for this use if it did work. however i will test it on my us robotics and belkin models that have usb as well. i might also try my NAS drive that has a usb port for daisy-chaining more usb items.
    the good thing is that the bottleneck on the emac won't affect the process, it's just a matter of whether the hdd-camcorder can be mounted via one of the other options.
    thanks for the other comments, i'll mark as answered once i see how it goes...
    anyone else have any thoughts?
    - jeremy

  • No se abre NI myRIO USB monitor cuando conecto mi myRIO en mi PC

    Hola a todos.
    Estoy iniciando con la NI myRIO, ya instalé todo el paquete de software necesario que viene en los CDs del dispositivo, el problema es que cuando conecto la myRIO a mi PC no arranca NI myRIO USB monitor que se supone deberia iniciar unos pocos segundos despues de conectar el dispositivo. Ya probe con desinstalar e instalar todo nuevamente pero igual no funciona. 
    Desde ya agradesco mucho aquien me colabore con este problema. 

    Hola Luis, primeramente muchas gracias por tomarte una parte de tu tiempo para ayudarme.
    Pues el NI MAX si reconoce la MyRio al momento que lo abro y veo la pestaña de  dispositivos e interfaces, si puedo agregar la NI Myrio a un proyecto ya que al momento que abro LabVIEW primero aparece la ventana de Set UP and Explore ahi ingresé al Launch the Getting Started Wizard y puedo probar el funcionamiento de la MyRIO, es decir el primer proyecto que es el acelerómetro, el boton externo  y los leds.
    En cuanto al paquete de software que instalé es el que se encuentra resumido en la siguiente imagen que capture durante la instalación, todo este paquete corresponde a la versión 2013 que es la que me vino en los CDs junto con la MyRIO.
    Aparentemente está bien instalado, pero como lo dije antes sigue sin abrirse el NI myRIO USB monitor cuando conecto la myRIO a la PC, la verdad es que me preocupa que esto repercuta más adelante en alguna aplicación, pense que podría ser problema de mi computadora asi que instale todo el software en otra PC y obtengo los mismos resultados. Es bastante raro porque por lo pronto me he dado cuenta que eso es lo único que no funciona.
    Nuevamente muchas gracias por tu colaboración y estaré a la espera de tu respuesta.
    Saludos,
    Att. GABRIEL

  • Creating exe with GPIB-USB

    When I create an application that uses my GPIB-USB-A interface it is not included as one of the VISA selections when the application is installed. Which files do I have to add to application installation to have my application work with GPIB-USB?

    You would need to install the GPIB and VISA driver,
    For GPIB, follow the steps from www.ni.com/support/install. You can download the latest visa driver from, ftp://ftp.ni.com/support/visa/drivers/

  • Problem with SB1240 USB sound card

    I'm pulling hair here! I've just bought a SB240. Windows (XP Pro, SP3) detected it and I can select it fine for listening. But when I open Sound and Audio Device Properties and select Sound Recording/Volume, I see the Capture panel with the three inputs, but all the controls are greyed out and immovable. I also use the application "Total Recorder" by High Criteria, in which I can select the SB240 device but the only input line it sees is SPDIF Interface.
    I'm stumped. Can anyone help?
    John?

    &Re: Problem with SB240 USB sound card
    Thank you. I did a complete uninstall, including the device itself (from Device Manager) as well as all drivers and any SB related software. As recommended by Creative, I had previously installed the driver software from the supplied CD and that seems to have been the problem.
    I let Windows re-detect the SB, but? got a "problem ... device may not work correctly.." during the detection, so I was not hopeful (this had not happened the first time I installed the device).
    Nevertheless it now does work fully and is properly configured in "Total Recorder" too.
    So I would suggest not using the supplied drivers and software - at least not in WinXP. But it's not very confidence inspiring.
    John

  • This is an embarassment! What audio interface works reliably with 10.5.2?

    For years Mac's have been the computer of choice for professional musicians and I was an early adherent dating back to the 80's and the first Apple MacIntoshes using MOTU Digital Performer V 1. I wandered away to PC land to do some C+ programming and recently returned with a brand new MacBook Pro only to find that the audio interfaces I have tried do not work with 10.5.2. I have tried a Firewire Interface from Tascam and a USB interface from M-Audio. Both created problems ranging from system crashes to simply not working. Is there an interface that works reliably with Leopard, 10.5.2? I can't try them all? The hardware manufacturers are scurrying to make their stuff work. Why is it so hard and why don't we hear more from Apple on this issue? Musician's have been a large part of the Mac universe. How about some support?

    Ok, Bucesam, you're freaking me out. I do periodic recording with my PowerBook using a Firebox. I've used my MacBook Pro several times since I got it, too. I just upgraded the MacBook to 10.5.2. Are you telling me the next time I need it for remote recording it won't work? I can't take time to check now, but will, probably right before I need it. Dang. Like a complete idiot, I blithely overwrote the 10.4.11 backup after all seemed right with 10.5.2. If anything, I would have expected even better core audio implementation in 10.5.
    Enough of my ignorant hand wringing. Can someone who knows what they're talking about (not me) speak to this before brucesam and I commit sepuku?

Maybe you are looking for