Interfacing with the GPIO built into a Commell LV-674 Board

Hello,
I am building up some systems using Commell LV-674 mini-ITX boards. Reading through the manual, it mentions that there is a built in GPIO with 8 programable I/O points. Does anyone out there have any idea how I would go about accessing the I/O points? There does not seem to be any information in Commell manual beyond that it is there and where the connector on the board is. Any help would be apriciated. Thank you.
Greg Osenbach
Gregory Osenbach, CLA
Fluke

I got commell LV-67A board, in their manual , it call CN_DIO.

Similar Messages

Does anyone have a suggestion for an alternative to iCal that will interface with the Cloud? I find iCal to be poorly designed and not very efficient.

Does anyone have a suggestion for an alternative to iCal that will interface with the Cloud so it works on the iPhone and the Macbook? I find iCal to be poorly designed and not very efficient. I waste a lot of time entering information because you can't go to a specific day and enter information, nor can you navigate between months and add information on a specific date by clicking on the date. You can't easily scroll month-to-month and once you do by scrolling through nine months to get to where you want to be, you cannot enter information by clicking on a specific day in the month and entering information. I just called Apple and they verified that this is the way it works. You cannot go to a date and enter information, you keep getting thrown back to today and then you have to go into the calendar and change it manually on the screen. It is just not efficient.

APC, CyberPower are reliable.
Look for 1500VA. As example:
APC
http://www.amazon.co.uk/APC-Back-UPS-Pro-1500-Connector/dp/B0041MP81Y/
Cyperpower:
http://www.amazon.co.uk/Dell-CyberPower-Intelligent-LCD-1500VA/dp/B005DL5L50/

If I buy a 32GB IPhone 4S, will i be able to store my current ITunes library on my phone through ICloud without taking up the 32GB built into my phone?

If I buy a 32GB IPhone 4S, will I be able to store my current ITunes library on my phone through ICloud without taking up the 32GB built into my phone?

iCloud does not store music except in two ways. First, you can redownload music previously purchased from the iTunes store should you ever need to (as long as the songs are still available); which is referred to as "iTunes in the Cloud" (but has nothing to do with your personal iCloud account). Secondly, you can store your music library in iCloud (up to 25,000 songs) if you subscribe to a fee-based service called iTunes Match (see http://www.apple.com/itunes/itunes-match/). If you subscribe to iTunes Match you can keep your music in iCloud, but (at least at the current time) when you listen to this music it is simultaneously downloaded to your phone so it ends up using some of you phone's capacity anyway.

WPC: unable to add different resources with the same name into a WPC page

Hi,
I got a WPC problem when adding different KM resources with the same name into a WPC page. Only one KM resource is able to be added in WPC.
For example:
There two "article.html" with different content and RID:
1. /company_a/article.html
2. /company_b/article.html
when adding these two html pages into a WPC page, only one page will be shown.
This means that a WPC page is not able to contain resources with same file names. I think the problem might lie on the resource-linking mechanism of WPC. WPC will add a resource link in the page folder, when a new resource is drag&dropped into WPC.
Anyone has some good ideas to solve my problem? Thanks a lot.
Regards
Lei NING
Edited by: Lei NING on Apr 15, 2008 4:16 PM

As this is not possible and double entries cause this problem, why not just pu both napes in the contact details on the same number. IE John Smith & Peter Jones all in the first name, by doing this if you search your contacts either by searching for john, peter, smith or jones the number will show up and if either calls the number will show John Smith & Peter Jones, it may not be perfect but will work. As the phone only recognises a number if two seperate entries of the number exist with different names it cannot possibly know who is calling ?
If I have helped at all, a click on the White Star is always appreciated :
you can also help others by marking 'accept as solution'

After opening my yahoo mail window, I keep getting a very narrow dialogue box with the words "log into Xmarks" I cannot ... and everything is frozen. How can I get rid of this thing, and what is it? I have to hit CNTRL + ALT + ESC to get rid of it.

After opening my yahoo mail window, I keep getting a very short and narrow dialogue box with the words "log into Xmarks" I cannot ... when it pops up, always upper left of my laptop screen and I try to get into my yahoo mail web page, I get a DING sound and cannot enter it ... everything is frozen. I have to hit CNTRL + ALT + ESC to get rid of it - and then reload my Firefox browser to get back to my yahoo e-mail page ... fortunately for me, Firefox re-stores a previous session ... How can I get rid of this intrusive thing, and what is it? Thanks in advance ... Ted Beaudoin, Welland, ON, Canada

Remove VideoFileDownload and find a downloader that doesn't contain TextEnhance.

HT200169 Having a problem with Logic 9 on a Mac Pro.Working on a lenghty song and apparently session got corrupted.Doesnt let me export tracks,program crashes.Already tried start brand new session with the tracks imported into it but still wont export.Sug

Hello,having a problem with Logic 9 on a Mac Pro.Working on a lenghty song and apparently session got corrupted.Doesnt let me export tracks,program crashes.Already tried start brand new session with the tracks imported into it but still wont export.Suggestions?

Thanks, Ian. Yeah, that's how I do it now...or with the controls in the left side pane. Still, I would have liked that quick on-the-spot edit capability...especially while sketching.
Ian Turner wrote:
Sorry Mark, you are out of luck as it does not do that - it works the same as L8. The way I would achieve that with more accuracy and control would be to route all the tracks you want to fade to a Bus then use volume automation on the bus. To do this you will need to add a standard audio track, then re-assign it using (Control Click on the track header) to the Bus track. You can then automate volume/plugins etc on the Bus track.
Ian

I recently bought a new Imac. Do I have to set up a wireless router or can my other devices connect thru the WIFI built into the Imac??

I recently bought a new Imac. Do I have to set up a wireless router or can my other devices connect thru the Wifi built into the Imac??

jason1074 wrote:
I recently bought a new Imac. Do I have to set up a wireless router or can my other devices connect thru the Wifi built into the Imac??
For the Internet, you should set up a router on your modem, this router will route the packets to any device on the local area network.
If you use the iMac as a router, like if you connect the Ethernet cable from your modem to the iMac, then broadcast a Wifi signal, the iMac will have to remain on all the time, at full power. Thus drastically shortening it's lifespand.
A router is only about $100 or so, offers much better security as it's like a large guard, someone has to hack through router first to get your iMac or other devices.
If it breaks, you buy another 5 years later for another $100, so your not placing all that always on wear and tear on your expensive iMac.
Apple's airport routers are pretty good, easy to set up and have automatic firmware updates, plus music sharing etc.
Set up properly you will be very secure
WiFi security issues, at home and WiFi hotspots

[SOLVED] no interfaces with the new iproute2

I get no interfaces with the 'ip a' command except for the 'lo' interface when I upgraded to iproute2-3.5.1-1. Anyone know a workaround?
Last edited by mikkie (2012-08-21 20:05:30)

That only lists interfaces that are currently up. Are you connected through eth0 or wlan0 when you run that command?
I'm not sure if it's the "right" way, but `ip maddress` shows all my interfaces, while `ip address` shows only those that are currently connected.
edit: `ip link` is probably the right command to list all interfaces. or `ip link show` according to the man page, but I believe the show is assumed in the shorter form - or even with just `ip l`.
Last edited by Trilby (2012-08-21 19:50:16)

My iPhone is merging different contacts with the same firstname into one contact. How can i resolve this.

My Bosses iPhone is merging different contacts with the same firstname into one contact. How can i resolve this? He seems very disturbed and thinks i don't know what i'm doing. I've set up all his devices to sync across and now its messed up on his iPad, and two iPhones.
E.G Contacts with firstname 'Adams' and different numbers are synced into one account.
Now i have no clue how many contacts are this way cos he has a huge number of contacts (he's the ceo).
Please i need a suggestion on how to fix this.
Thanks for the help.

Janie Mac wrote:
Cannot find settings to then go to general then about.
How do I edit the device in iTunes?
Double-click on the name.
My screen shot shows both devices because I sync wirelessly. Right now I can change the iPod name but not the iPad name because the iPod is idle while the iPad is syncing. In another minute or two, I'll be able to change the iPad name.

Record the voices built into Yamaha keyboard onto Garageband

I've successfully connected my Yamaha keyboard to record the Software instruments in Garageband.
Conversely, how do I record the voices built into my Yamaha keyboard onto Garageband?
Thanks.

1. Plug the Line-Out of the keyboard into the line-in on your computer
2. Create a New Basic Track
3. Press record.
4. There is no 4

Can I use my MBox interface with the latest version of Logic Pro X?

Can I use my Mbox interface with the latest version of Logic ProX?

If your Mbox has a Core Audio driver compatible with your version of OSX, then most likely, yes.
J.

How to connect my app interface with the code in flash builder?

I'm a beginner and learning my way around actionscript,mxml and flash builder.So this may seem foolish but please bear with me,I'm creating a very simple ios app using flash builder,I have created a simple app interface (A background and a custom navigation bar)using photoshop for my app,now the question is how do i import it into flash builder so that i can connect it with the code i have written? or is there another simpler way to create a app interface using other products like fireworks or catalyst?
In short, I want to know how is an app interface created(wt software) and how is it connected with its code using flash builder.Any help would be greatly appreciated, and tutorials would be swell
Thanks!

Can you use stage.width or stage.stageWidth?

HT4623 My iphone will no longer sync with my Mac with Lion operating system which does not interface with the cloud. How do I sync by plugging in?

I have always been able to sync by plugging into my computer Mac OS 10.6.8 which does not interface with icloud. Now my iphone only wants to sync calander and contacts via icloud and will not sync when plugged in. Does any one else have this issue and or ideas?

Do you have the latest version of iTunes? If not, get it at:
http://www.apple.com/itunes

Interface with the Asset & Inventory Barcode Scanners

Hi All,
I need some help regarding the integration/interface of barcode scanners with the Assets and Inventory system and it would be greatful if someone can help me out with the possible solution.
The background and my questions are as follows -
On my current project, the Client Asset department uses the barcode scanners (Company - M3 Mobile - MC-7500S) with the legacy system. The barcode scanners generates the excel file and they upload the file in the legacy system, which updates the location and tracking specific data in the system. They also use these the scanners for the good receipt and stocktake of inventory and assets too.
My questions are as follows -
1. How can we interface them with the ECC 6.0 system?
2. What will be the process?
3. Can we update the asset and inventory data into the SAP system?
Thanks in advance
Regards
Manoj Kaushik

Not sure if this helps, but our company requires batch uploads - not wireless. Several years ago we developed idocs to handle the transfer of data from a scanner to SAP. This process is still in use today in ECC 6.0. The data passed is Inventory Date, Bar Code, Room, & Location, which is updated on the asset record.

Using an Applet to interface with the computer

h6. Situation
I am trying to build a an Applet, which will allow me to interface with a computer in the same way that a simple 'presentor' does. For clarification a 'presentor' is a piece of hardware that you plug into the computer and then use a radio device to move through the slides.
I cannot think how to do this, though I am sure that it is possible...its Java?! The only way i can kinda see it working is if the Applet emulates a piece of hardware...if that is the case then I think I might be out of my relms of programming. However I appreciate that what I am attempting to do flys in the face of Java in a sense at it runs and exists in a Virtual machine...but there has to be a way....If i can get an Applet to read and write a file on my operating system....then I must be able to get it to emulate a mouse click?
What do you guys think? Am I being to ambitious or just stupid? :)

Ok, here goes :)
Basically I am trying to create a web based Remote Presenter. You know those bits of hardware were you plug the receiver into the PC and then have the hand held device that allows you to skip though slides.
I think that the need for a receiver dongle is pointless, extra stuff to carry around. I am trying to use my Nokia N95 device, with its build in webserver to create something a bit different.
So far I have been able to create an applet that I have signed, that has the ability to open a socket and wait. I have a very simple server app that sends data to that socket, either a 1 or a 0. When the applet receives this value, it performs a mouse click.....
I have now put this applet onto my N95 mobile web server which is basically a very simple apache webserver and I can access the page and download the applet. The next stage is to somehow create a program that can talk though my mobile phone to the applet......
Ultimately, when I give a lecture I will be able to just browse on the PC to the URL of my mobile web site (xxx.mymobilesite.net) and then run an application on my mobile to control the computer......
A lot of work for a simple power point controller...but with the possibility of more....

Interfacing with the GPIO built into a Commell LV-674 Board

Similar Messages

Maybe you are looking for