Intergrate any ABAP transaction in a ABAP WD application (not via ITS!)
Can I integrate any standard ABAP transaction in a ABAP Webdynpro application, for instance in a Popup? (not ITS!).
My workaround is:
To create an iView for the ABAP transaction in the portal and to call the iView using the iVIEW URL. This works, but should be a workaround only.
hi andre......
you cannot call an abap transaction from webdynpro for that gui is not supported in webdynpro.
---regards,
alex b justin
Similar Messages
-
i am tryin to access old macbookpro harddisk on macbook air,when i connect it via usb i see the folders,but i dont see any files e.g. my saved photos,movies,docs are not there,its shows that 220gb is used,but no data is visible...all folder are empty.......can someone pls adv how to access data?
i am tryin to access old macbookpro harddisk on macbook air,when i connect it via usb i see the folders,but i dont see any files e.g. my saved photos,movies,docs are not there,its shows that 220gb is used,but no data is visible...all folder are empty.......can someone pls adv how to access data?
-
ABAP transaction replacement in PI 7.3?
Hello.
I'm currently using a new PI 7.3
When using integrated scenario - the ABAP section is being skipped.
Is there a replacement for old ABAP transactions like IDX5 for example?
Is there any documentation on the subject?
Thanks,
Imanuel Rahamim.Hi,
Refer to the following links for details:
[Monitoring the Advanced Adapter Engine|http://help.sap.com/saphelp_nw73/helpdata/en/af/d36bc882e846f29ddef9dc1741527b/frameset.htm]
[Monitoring Messages in AAE|http://help.sap.com/saphelp_nw73/helpdata/en/48/b2d2347895307be10000000a42189b/content.htm]
[Displaying IDoc Messages in IDOC_AAE|http://help.sap.com/saphelp_nw73/helpdata/en/de/82c727b3d94714a04a4a579663fcf5/content.htm]
[Displaying IDoc Metadata|http://help.sap.com/saphelp_nw73/helpdata/en/50/980951964146f1a7f189b411796bae/content.htm]
Hope this helps,
Greg -
Timeout Error in Call Transaction on Asynchronous Abap Proxy
Hi Gurus!!
We have a problem with a Call Transaction on Asynchronous Abap Proxy. When the process of Call Transaction (transaction CO02) takes more than 10 minutes, the process is cancelled with sy-subrc 1001 and the Abap Proxy continues with the execution. Strangely, there is a short dump in ST22 on transaction CO02, although on the ABAP Proxy we don't get any dump.
When this process is called from a Background Job no dumps are get.
Somebody knows if there is a problem with the Asynchronous ABAP Proxy executing CALL TRANSACTION statementent?
Thanks and regards,
Manuel.and the message after recording is
Number 1
Transaction F-22
SY-SUBRC 0
Messages
FB01 SAPMF05A 0301WEZ001 066
FB01 SAPMF05A 0300WEZ001 066
FB01 SAPMF05A 0300EEZ001 073
I F5 573 Correct the error reported before on the next screen
FB01 SAPMF05A 0300WEZ001 066
FB01 SAPMF05A 0300EEZ001 073
I F5 573 Correct the error reported before on the next screen
FB01 SAPMF05A 0330WEZ001 066
FB01 SAPMF05A 0301WEZ001 066
FB01 SAPMF05A 0301WEZ001 066
FB01 SAPMF05A 0301WEZ001 066
S F5 312 Document 100001677 was posted in company code 3100 -
CALl Transaction Failing in ABAp Proxy
Hi All,
We are trying to CALL the VL02n Transaction in our ABAP Proxy Class Code. But the System is somehow not able to CALL The Transaction.
But if we create a BDC Session the session is getting created.
Any inputs as to why this is falling.
Regards,
ArunavaHi there,
Arun and I are working on this issue together.
We have tried the Call Transaction with mode 'N', and it does not work. We get sy-subrc = 1,001 from the Call transaction statement. We we run it in Mode 'A', we get kicked out from the session completely. The user we are using to connect from XI to ECC has SAP_ALL, and is also a Dialog user.
Any help/ideas would be very well apprciated...
Regards,
Jawwad -
List of SAP PI 7.0 ABAP transactions
Hi,
Can any one proivde me the list of all transactions codes , that will be used for SAP PI 7.0 ABAP system.
Do we have any blog or thread which talks about these transactions.
Thanks,
YounusHi,
Please go through the below weblog for the same:
/people/morten.wittrock/blog/2006/03/23/getting-started-with-xi-part-1-xi-30-cheat-sheet
/people/community.user/blog/2007/02/21/ready-reference-for-xi-developers
SLDCHECK Test SLD Connection
SXMB_IFR Start Integration Builder
IDX5 IDoc Adapter - Monitoring
IDX2 Meta Data Overview in IDoc Adapter
IDX1 Port Maintenance in IDoc Adapter
SM59 RFC Destinations (Display/Maintain)
SM58 Asynchronous RFC Error Log
SPROXY ABAP Proxy Generation
SALE Display ALE Customizing
WE21 Port definition
WE20 Partner Profiles
SE80 Object Navigator
RZ20 CCMS Monitoring
SXI_MONITOR XI: Message Monitoring
SXI_CACHE XI Directory Cache
SPROXY ABAP Proxy Generation
SXMB_MONI Integration Engine - Monitoring
SE16 Data Browser
SE11 ABAP Dictionary
SE37 ABAP Function Modules
SE38 ABAP Editor
SM31 Call View Maintenance Like SM30
SM30 Call View Maintenance
SE38 ABAP Editor
SMICM ICM Monitor
ST05 Performance trace
AL11 Display SAP Directories
SM12 Display and Delete Locks
SM49 Execute external OS commands
SM69 Maintain External OS Commands
SLDAPICUST SLD API Customizing
AL11 Display SAP Directories
SU01 User Maintenance
SMGW Gateway Monitor
Thnx
Chirag -
Sales UI not working for ABAP transaction
Hi All,
I am wokring on SALES UI and created a roles copying role Internal Sales represnatative. I have added ABAP transactions like VA01 and XD01 along with WEBDYNPRO transactions. While Webdynro applications are working fine but when trying to use ABAP transations screens are appearing but unbale to select filed values or tabs or exceute. Almost screens are freezed. Both are working fine in development client but when moved to testing client ABAP transactions are not working.
We are unable to find the cause. i have activated error log on internet explorer i am getting following errors:
The value of the property 'append_to_body' is null or not defined, not a function object
and
UCF properties is undefined
Lightspeed.js
code : 0
URI:http://xxxxxxxxxx:8000/sap/public/icmandir/its/ls/js/lightspeed.js?201
Can anyone let me know the root cause and remedy for the issue.
Thanks and Regards
SatyaSatya
Assuming that this is not a security issue, then I will assume this is a probably a rendering issue cause by the IE Lightspeed cache. The cache itself could resides either at your desktop, MIME directory server or the App Server; and it would need to be re-initialize for it to function. Good luck!
Step 1: Clear your IE Cache by deleting all your IE Temporary Files
-> If this fail to work, try step 2.
Step 2 below need to be thoroughly tested before repeat in PRD environment, It could cause any user session that is accessing the MIME object to crash
Step 2: Clear the MIME Directory (REF: SAP Note - 1922663)
-> Run the report WDG_MAINTAIN_UR_MIMES in order to update the archive containing the MIME files for HTML rendering. Choose deploy MIMES.
-> If this fail to work, try step 3
Step 3 below should only be used in NON-PRD environment AND work with your Basis Team to ensure that it will not cause issue
Step 3: Clear the Server \ App Server Mime
-> Run SE38, program RSMONICM, click execute twice then use the drop down menu path below:
Goto --> HTTP Plugin --> Server Cache --> Invalidate Globally. Click "Yes". -
Every transaction ends in abap debugger
hi experts,
recently i have installed netwaver 7.0 sneak preview on my system until now it was working fine
bit today when i activate transformation,dtp,infopackage... anything transaction ends in abap debugger
in program GENERATOR object reference METRSDS cant find any dump or trace in st22 or st11.
please help me out.
sanjeevHi Sanjeev,
As you said you have newly installed BI 7.0 have you run the SGEN?
SGEN is transaction which compiles all transactions and buffere them in memory. So that when every you run any transaction it does not take much time.
After installing any SAP system running SGEN is mandartory. Generally SGEN takes 6-7 hours to complete.
Regards,
Ajinkya -
Urgent!! How to call a custom transaction or an ABAP program in BSP?
Urgent!! How to call a custom transaction or an ABAP program in BSP?
We are pretty new on BSP. Would be very appreciated if any expert here give us the detailed steps on how to build up the application to just call a custom transaction (e.g., t-code: ztest) or an ABAP program. Would we have to create a button or event handler to do that? And the detailed steps?
Thanks in advance and we will definately give you reward points!hi Durairaj,
During the time to wait for your answer, we copied Bernd's code from your last link, but when activating it, get the 1st error msg:
Field "CLIENT" is unknown. It is neither in one of the specified tables nor defined by a "DATA" statement. "DATA" statement."DATA" statement. The error shows up here:
<td>
<htmlb:inputField id = "client"
value = "<%= client %>" />
</td>
Then we added Client to the page attribute and define it as type String, then get another error:
The field "EVENT" is unknown, but there is a field with the similar name "EVENT_ID"."EVENT_ID". This error shows up at the beginning in the Event Handler:
OnInputProcessing:
code
event handler for checking and processing user input and
for defining navigation
event handler for data retrieval
event = cl_htmlb_manager=>get_event( runtime->server->request ).
IF event->name = 'button' AND event->event_type = 'click'.
button_event ?= event.
How to resolve this unknown Event error, need to define in Page Attribute tab? but with what type?
Actually we only want to run an ABAP4 program in BSP, the code is complicated, could you show us an easy way of doing this in BSP? -
Finding the transaction of an abap runtime error
hello,
is it possible to find out the corresponding transaction to an abap runtime error?
till now i've got all informations like they are shown in ST22 in my abap program. but i'd also like to have the transaction code, not only the corresponding devclass, subapplication and application.
does anyone know a function module or any other solution for that problem?
thanks in advance
joschiWhen you are analyzing your short dump via ST22, there is a section called "User, transaction..." where the following information is shown:
Client
User
Language key
Transaction
Program
Screen
That section will show you the transaction code you need.
I hope that helps, -
ABAP Transaction iview Problems.
Dear experts.
I have created a Abap transaction iview in portal which navigates to one ABAP transaction after opening. But my requirement is not to show the command box after going to that transaction, because by using that they can enter the other transaction code in that command box and go to other transactions.
So I want to hide that command box. Is there any way to hide that?
Appreciate your response
Regards
Shanmukha Rao BanisettiHi,
Check the SAP Note 1010519 for the solution.
Also try to set the ~webgui_simple_toolbar=1 parameter under transaction sicf.
Below links also solve your problem
https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/e046cb5c-711a-2a10-95a9-81b365901b95
Remove header in ITS screen (internal ITS)
Raghu -
Invoke a ABAP transaction in a report.
Hi,
How can I invoke another ABAP transaction from a report/module pool program?
Can I pass values to the fields?
Regards,
Arvindh.hi,
if you want to call tcode through your report or modulepool program
use <b>call transaction</b> press f1 to see some more help on it.
if you want to call another report program or any other report in through your program
use <b> submit</b> key world.
SUBMIT rep.
other fields you can add are
LINE-SIZE col
LINE-COUNT lin
TO SAP-SPOOL
VIA SELECTION-SCREEN
AND RETURN
EXPORTING LIST TO MEMORY
USER user VIA JOB job NUMBER n
Various additions for parameter transfer to rep
USING SELECTION-SETS OF PROGRAM prog
don't forget to reward points if it helps. -
Hi all,
I'm a bit confused in using the transaction codes in ABAP like se11,...so on.
What code can be used for what application....so on.?
Can any one please help me out in giving the transaction codes in ABAP.
Please give them in a list wise...i.e.,
Transaction code -
What Application(such as editor, smartforms, function modules).
ID: [email protected]
Bye,
SAI KUMARHI,
USMM Pressing F8 will display all hotpacks applied.
SEARCH_SAP_MENU Show the menu path to use to execute a given tcode. You can search by transaction code or menu text.
DI02 ABAP/4 Repository Information System: Tables.
LSMW Legacy System Migration Workbench. An addon available from SAP that can make data converstion a lot easier. Thanks to Serge Desland for this one.
OSS1 SAP Online Service System
OY19 Compare Tables
SM13 Update monitor. Will show update tasks status. Very useful to determine why an update failed.
S001 ABAP Development Workbench
S001 ABAP/4 Development Weorkbench. (from [email protected])
S002 System Administration. (from [email protected])
SA38 Execute a program. (from [email protected])
SCAT Computer Aided Test Tool
SCU0 Compare Tables
SE01 Old Transport & Corrections screen
SE03 Groups together most of the tools that you need for doing transports. In total, more than 20 tools can be reached from this one transaction.
SE09 Workbench Organizer
SE10 New Transport & Correction screen
SE11 ABAP/4 Dictionary Maintenance SE12 ABAP/4 Dictionary Display SE13 Maintain Technical Settings (Tables)
SE12 Dictionary: Initial Screen - enter object name. (from [email protected])
SE13 Access tables in ABAP/4 Dictionary. (from [email protected])
SE14 Utilities for Dictionary Tables
SE15 ABAP/4 Repository Information System
SE16 Data Browser: Initial Screen. (from [email protected])
SE16N Table Browser (the N stands for New, it replaces SE16). Provided by Smijo Mathew.
SE17 General Table Display
SE24 Class Builder
SE30 ABAP/4 Runtime Analysis
SE32 ABAP/4 Text Element Maintenance
SE35 ABAP/4 Dialog Modules
SE36 ABAP/4: Logical Databases
SE37 ABAP/4 Function Modules
SE38 ABAP Editor
SE39 Splitscreen Editor: Program Compare
SE41 Menu Painter
SE43 Maintain Area Menu
SE48 Show program call hierarchy. Very useful to see the overall structure of a program. Thanks to Isabelle Arickx for this tcode.
SE49 Table manipulation. Show what tables are behind a transaction code. Thanks to Isabelle Arickx for this tcode.
SE51 Screen Painter: Initial Screen. (from [email protected])
SE54 Generate View Maintenance Module
SE61 R/3 Documentation
SE62 Industry utilities
SE63 Translation
SE64 Terminology
SE65 R/3 document. short text statistics SE66 R/3 Documentation Statistics (Test!)
SE68 Translation Administration
SE71 SAPscript layout set
SE71 SAPScript Layouts Create/Change
SE72 SAPscript styles
SE73 SAPscript font maintenance (revised)
SE74 SAPscript format conversion
SE75 SAPscript Settings
SE76 SAPscript Translation Layout Sets
SE77 SAPscript Translation Styles
SE80 ABAP/4 Development Workbench
SE81 SAP Application Hierarchy
SE82 Customer Application Hierarchy
SE83 Reuse Library. Provided by Smiho Mathew.
SE84 ABAP/4 Repository Information System
SE85 ABAP/4 Dictionary Information System
SE86 ABAP/4 Repository Information System
SE87 Data Modeler Information System
SE88 Development Coordination Info System
SE91 Maintain Messages
SE92 Maintain system log messages
SE93 Maintain Transaction. (from [email protected])
SEARCH_SAP_MENU From the SAP Easy Access screen, type it in the command field and you will be able to search the standard SAP menu for transaction codes / keywords. It will return the nodes to follow for you.
SEU Object Browser
SHD0 Transaction variant maintenance
SM04 Overview of Users (cancel/delete sessions)
SM12 Lock table entries (unlock locked tables)
SM21 View the system log, very useful when you get a short dump. Provides much more info than short dump
SM30 Maintain Table Views. (from [email protected])
SM31 Table Maintenance
SM32 Table maintenance
SM35 View Batch Input Sessions
SM37 View background jobs
SM50 Process Overview. (from [email protected])
SM51 Delete jobs from system (BDC)
SM62 Display/Maintain events in SAP, also use function BP_EVENT_RAISE
SMEN Display the menu path to get to a transaction
SMOD/CMOD Transactions for processing/editing/activating new customer enhancements.
SNRO Object browser for number range maintenance. (from [email protected])
SPRO Start SAP IMG (Implementation Guide). (from [email protected])
SQ00 ABAP/4 Query: Start Queries
SQ01 ABAP/4 Query: Maintain Queries
SQ02 ABAP/4 Query: Maintain Funct. Areas
SQ03 ABAP/4 Query: Maintain User Groups
(Queries,Funct. Areas,User Groups are stored in table AQGQDOC and AQLQDOC )
SQ07 ABAP/4 Query: Language Comparison
ST05 Trace SQL Database Requests. (from [email protected])
ST22 ABAP Dump analysis
SU53 Display Authorization Values for User. (from [email protected])
WEDI EDI Menu. IDOC and EDI base.
WE02 Display an IDOC
WE07 IDOC Statistics
rgds,
bharat. -
Hi All,Where can any send me material on ABAP-HR urgent please
Hi All,Where can any send me material on ABAP-HR urgent please .
Thanks®ards.
Bharat Kumar.Hi,
Here is a good start......
http://www.planetsap.com/hr_abap_main_page.htm
http://help.sap.com/saphelp_nw2004s/helpdata/en/c6/8a15381b80436ce10000009b38f8cf/frameset.
Regards -
How to call transaction in an abap program
how do we open a transaction thru an abap program and pass a parameter to it
Use call transaction. You can fill up the parameters in the BDC internal table
DATA: bdc_tab LIKE bdcdata OCCURS 0 WITH HEADER LINE.
DATA: messtab LIKE bdcmsgcoll OCCURS 0 WITH HEADER LINE.
CONSTANTS: c_tcode LIKE t130m-tcode VALUE 'FB01'. "Tcode you want to call
CALL TRANSACTION c_tcode
USING bdc_tab
MODE 'N'
UPDATE 'S'
MESSAGES INTO messtab.
Error message will be captured in the messtab.
You can goto the SAP help on Call transaction to see all the details and options.
<b><REMOVED BY MODERATOR></b>
Thanks.
Message was edited by:
Alvaro Tejada Galindo
Maybe you are looking for
-
Acrobat form; how to set-up a drop down list that has catagories?
Hi, We produce business directories. I am working on a display ad proof template where the user has a choice of 10 main categories where each main has 5 to 15 sub-categories. In my new Adobe Acrobat Pro 9 I understand how to create a drop down list,
-
Document Status -- Authorization group?
Hi, I defined new status values for document in the IMG SolMan project. In addition, i created the document Status schemes with sequence number (Status values). The workflow sequence is working after testing in the Business Blueprint. The problem is,
-
How to unmerge skype and hotmail account?
whenever I receive a message from live messenger, both live messenger and skype flash on my taskbar, I dont like this...
-
White screen after login?????
When I start my computer, it goes through the opening screen, boot sound, apple, etc. get the option to type in my pas word and it goes to a white screen. What do I need to do???
-
Hi there, I've coded small VIs to communicate with RS232 devices since LabVIEW v3.x. I'm now trying to write a VI to talk to an esoteric photon detector. Using a serial line sniffer, I have verified the serial line setting s and can communicate with