Intergration Builder: Authorization error

Hi!
I am facing currently with the following problems:
1) Error by execution of tcode sxmb_ifr:
Enterprise Services Builder not maintained
2) Authorization error by start of Integration Builder: Configuration
(http://localhost:50000/rep)
Authorization error; unknown user name or incorrect password
I log in with user "j2ee_admin"
Can some one please help to solve these problems?
Thank you very much!
Thom

I just restarted the SAP system. Now it is works.

Similar Messages

Pisuper Authorization error, I can't logged with any user on Int Builder

Hi SAP Guru's ,
Please help me as i new in SAP XI . I am unable to logged on in Integration Builder with any user i tried pisuper, sapuser but still got the same error "Authorization error, unknown username or password" . I check with T-Codo SU01 but pisuper does not exist so i create one user and assign him SAP_XI_Developer , SAP_XI_Configuration etc but still i am unable to login so kindly requesting you to please help me as quickly as possible.
even though i am unable to logged on user management with any user. PLease tell me the step by step configuration of how to setup each and every part of XI.

check with naveen's reply
XI 7.0 - Authorization error; unknown username or incorrect password
Also visit the blog
Unable to open IR/ESR/ID ? (XI/PI/PI 7.1) [Updated for PI 7.1 support]

Authorization errors when access to Integration builder design

HI ALL,
I am roger,
i have XI system, i can open http://localhost:50000/rep/start/index.jsp
and the the display content is fine. but when i click the 'integration builder' or 'integration directory' link, it prompt the username and password, then i input my username and password, the error
'Authorization error; unknown user name or incorrect password' occurs.
i can access the NWA using the username and password and my account has the SAP-XI_administrator role. i don't know why i can't access the 'integration builder' or 'integration directory' , what cause this problem?
Very thanks for your reply

Hi Roger,
Go through this link and check you have the same roles as mentioned in this:
This link is best to know the roles.
http://www.erpgenie.com/sap/netweaver/xi/xiauthorizations.htm
Trouble logging to Integration Builder ( IR / ID ) ?
/people/shabarish.vijayakumar/blog/2006/02/13/unable-to-open-iresrid-xipipi-71-updated-for-pi-71-support
Regards,
Sarvesh

Authorization error when opening Integration Builder

Hi,
When I try to open Integration Builder I'm frequently getting authorization error. I always do a restart of Java engine when ever I get this problem. After the restart, I don't get the error.
Can any one tell me what is the permanant fix for this instead of always restarting the Java engine.
Thanks in advance
Sreenivas

Hi Sreenivas,
While opening Integration Builder there should not be any error about authorization. However if it is occuring then it may be due to Java Web Start version. Please install latest version of Java Web Start 1.4.2 or higer version. Its version 1.5 with update 3 will be the best for it. Even if it is install then please remove it and install it again. It may solve your problem because when you restart the JAVA engine and it work shows that there is some problem with Java web start.
I hope that this will resolve your issue, even if countinues then go to ABAP stack and copy your Login ID and create it again.
Reward points if beneficial.
Regards,
Subhasha Ranjan

Log SSP and Authorization Errors

I asked for this on the feature request website
"It seems that apex does not log SSP errors or Authorization errors, or if it does, they are no available in an apex view. For example, if a user changes the page number in the url to a page he is not authorized to see, an error page is dispalyed, telling him that he cannot see this page. As far as I can tell, this error is not logged in the apex views. Same goes for, when a user tries to change an id in the url."
My item was closed with the comments
"The error messages are logged into the activity log if activity logging is enabled for your application. Have a look at the column ERROR_MESSAGE in the view APEX_WORKSPACE_ACTIVITY_LOG. "
Well I tested it again.
I went to a page and changed the item_id and I received the checksum violation message.
I then did a select * FROM APEX_WORKSPACE_ACTIVITY_LOG and looked for the error message.
There was no error message.
Can someone else try this
Gus

Hi Gus,
I just have setup another test at apex.oracle.com
workspace: patricks_test
user: guest
pwd: 123456
1) Run application 24683 and login as guest/123456
2) If you click "Customers" you will get the authorization error
3) If you click "Products" and then pick a product to navigate to page 6 and afterwards modify the value of P6_PRODUCT_ID you will get the checksum error
4) In the Builder navigate to Administration -> Monitor Activity -> By Application -> 24683 and you will see the entries of APEX_WORKSPACE_ACTIVITY_LOG
When you did the query on APEX_WORKSPACE_ACTIVITY_LOG, did you verify that your app is writing activity logs at all? And second, have you connected with the parsing user of your application?
Regards
Patrick
Member of the APEX development team
My Blog: http://www.inside-oracle-apex.com
APEX Plug-Ins: http://apex.oracle.com/plugins
Twitter: http://www.twitter.com/patrickwolf

Integration Builder: authorization problem

Hello all,
I have the following message error when i try to login on Integration Builder:
"No authorization for this action"
My user was created in SU01 with all XI roles:
SAP_XI_ADMINISTRATOR_J2EE
SAP_XI_DEMOAPP
SAP_XI_CONFIGURATOR
SAP_XI_DISPLAY_USER
SAP_XI_SUPPORT
the user also exists in UME with several authorizations..
Please, could anybody help me?
Thanks in advance
Javier Guio

hi,
I have created a new user in SU01with the same roles but when I try to access on Integration builder with the new user I get the error:
"authorization error, unknown user name or incorrect password"
- <b>Go to SU01 enter the username check the roles are in Green color , if roles are not green colore generate Role generation Using Tcode : PFCG.</b>
Generating Roles for SAP_XI and SAP_SLD
Generate all roles beginning with SAP_XI and SAP_SLD:
1. Call transaction PFCG.
2. Choose Utilities → mass generation. Do the following:
a. Field Role: Enter SAP_XI*
b. Select Generate automatically
c. Press <F8> and choose Generate online
If there is a list of profiles displayed, which are not yet generated, repeat the
procedure by pressing <F8>.
d. Repeat the steps for roles SAP_SLD*
3. Choose Utilities → mass comparison. Do the following:
a. Field Role: Enter SAP_XI*
b. Select Output error messages
c. Choose Execute (F8).
No error message should be displayed
You can ignore the message that the role SAP_XI_CMS_SERV_USER does
not have a profile.
Regards,
Venu.

Authorization error; unknown user name or incorrect password

Hi,
We are facing the issue logging into Integration Builder in PI system getting "Authorization error; unknown user name or incorrect password" for all the users.I able to login NWA in PI system.Please find the default trace details below.help us.
#1.#5611B888D81000840000018F0284005E0004B97914AC4703#1329829595847#com.sap.engine.services.security.authentication.logonapplication#sap.com/com.sap.security.
core.admin#com.sap.engine.services.security.authentication.logonapplication.doLogon#J2EE_GUEST#0##fxtcs.unix_FXT_336466250#Guest#e2057c775c8c11e1bb605611b888d
810#SAPEngine_Application_Thread[impl:3]_49##0#0#Error##Java###doLogon failed
[EXCEPTION]
#1#com.sap.security.core.logon.imp.UMELoginException: USER_AUTH_FAILED
        at com.sap.security.core.logon.imp.SAPJ2EEAuthenticator.logon(SAPJ2EEAuthenticator.java:946)
        at com.sap.security.core.logonadmin.ServletAccessToLogic.logon(ServletAccessToLogic.java:208)
        at com.sap.security.core.sapmimp.logon.SAPMLogonLogic.doLogon(SAPMLogonLogic.java:914)
        at com.sap.security.core.sapmimp.logon.SAPMLogonLogic.uidPasswordLogon(SAPMLogonLogic.java:578)
        at com.sap.security.core.sapmimp.logon.SAPMLogonLogic.executeRequest(SAPMLogonLogic.java:158)
        at com.sap.security.core.sapmimp.logon.SAPMLogonServlet.doPost(SAPMLogonServlet.java:60)
        at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)
        at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
        at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:401)
        at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:266)
        at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:386)
        at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:364)
        at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:1039)
        at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:265)
        at com.sap.engine.services.httpserver.server.Client.handle(Client.java:95)
        at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:175)
        at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
        at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
        at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
        at java.security.AccessController.doPrivileged(AccessController.java:219)
        at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:104)
        at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:176)
Regrads,
Mani

Hi,
Check this for the roles required for integration builder [http://help.sap.com/SAPHELP_NW04S/helpdata/en/c4/51104159ecef23e10000000a155106/content.htm]
Accordingly get the required role assigned to the user you are using there.
Unlock the user if it is locked
Reset the password and provide the new password in the login settings
Give a try again
Regards,
Venkata S Pagolu
Edited by: Venkata Pagolu on Feb 22, 2012 4:23 PM

The authorization error(unknown username) when I logon IB

Dear everyone,
Nice to meet you.
I administrated XI 3.0.
I made ID for displaying directory and repository.
When I logon with it on Integration Builder,
the authorization error(unknown username) is occured.
But it has roles as follows:
- SAP_IDOC_EVERYONE
- SAP_KM_KW_ALL_AREAS_DISPLAY
- SAP_TST_XI_DISPLAY_USER
- SAP_TST_XI_MONITOR
- SAP_XI_BPE_MONITOR_ABAP
- SAP_XI_DISPLAY_USER_ABAP
- SAP_XI_DISPLAY_USER_J2EE
- SAP_XI_ID_SERV_USER
- SAP_XI_IR_SERV_USER
- SAP_XI_MONITOR_ABAP
- SAP_XI_MONITOR_J2EE
Do I have to add this ID in "connection" parameter on exchange profile?
Would you mind telling me how to solve this problem?
Thank you.
Regards,
Soyeon

Dear Paul,
I appreciate your advice.
I've checked them as you said.
1. In VA,
ume.persistance.data_soruce_configuration in the UME Provider was set to dataSourceConfiguration_r3_roles_db.xml
2. Implement 864268.
In VA, Dispatcher -> Services -> P4 Provider : bindHost is set to IP
3. In NWA, I installed J2EE/ABAP.
But, In Integraion Builder, a ID that I issued can not logon.
Please let me know another tips.
Thanks a lot.
Have a nice day!
Sincerely,
Soyeon

Authorization error while attaching document in ME22N

Hi,
Scenario 1: I attach a document in ME22N and then save it. Result: I get an authorization error.
Error is: "You have no authorization for extensions (activity03)"
Scenario 2: I just make a change (say in price) without attaching any document and then when i try to save it. Result: There is no authorization error.
Message (output) type in both the cases is EDI.
On further investigation, we found the authority-check abap statement which is responsible for throwing the error.
authority-check           object authority_obj_edi_deftool
            id 'EDI_TCD' field authority_tcode_edi_deftool
            id 'ACTVT'    field pi_activity
            id 'EDI_DOC' DUMMY
            id 'EDI_CIM' field pi_cimtyp.
This statement gets executed for both the scenarios and with the SAME variables but it throws error in case of scenario 1 only.
Following are the values of the variables in BOTH cases:
authority_obj_edi_deftool = S_IDOCEFT
authority_tcode_edi_deftool = WE30
pi_activity = 03
pi_cimtyp = Z2ORDERS02
Any help is appreciated.
Regards,
Chinmay

Dear,
Kindly contact your basis team. it will help you.
Please give him SU53 screen short for his reference.
Regards,
Sandip

Authorization Error on Peoplesoft Login Page

Hi, this is related to the previous project we are still working on.
Invoking a Java Method from Peoplecode
While we have found that our approach have been successful in Dev and Test Environments, once we migrated the changes to Production, it seem to have stoppped working. Our client wants to test the link from Test Environment and would Single Sign On to the Production environment. But we are getting this eror, Authorization Error -- Contact your Security Administrator on the Peoplesoft login page when the link is clicked from the Third Party website.
The node setup for Dev, Test and Prod environments under Node Definitions are using PSFT_CR as the default local node and are all working when ping'ed. The defaut user that is used for allowing public access in the Web Profile are setup'ed just the same in all three environments, and application/web servers have been restarted as well.
One thing we noticed is that the url of the third party website is http and the url for the PS prod is https. Could this be the one causing the error, or have we missed something on the setup.
Again, we appreciate your insights regarding this.
Edited by: Jeremy Leung on Jul 9, 2012 11:50 PM

Hello,
Have you tried the steps suggested by
Imtiaz Hussain in the
previous thread you queried ?
Is the error the same that you were previously encountering ?
Regards,
Neelesh.

Report builder error after applying sql server 2008R2 SP3 when click on report builder gives error like 'Application validation did not succeed. Unable to continue.

Hi All,
I applied SQL server 2008 R2 SP3 recently but report builder doesn't work since then
When click on report builder gives error like 'Application validation did not succeed. Unable to continue.
and when I try to see details the error summary like following:
+File, Microsfot.ReportingServices.ComponentLibrary.Controls.dll, has a different computed hash than specified in manifest.
this is urgent.
Please reply me asap.
thanks a lot in advance.
Regards,
Nik
Regards, Naman

Hi nikp11,
According to your description, you recently updated SQL Server 2008 R2 to SP3, Report Builder doesn’t work since then the error occurs: "Application validation did not succeed. Unable to continue".
This is an known issue in SSRS 2008 R2 SP3 that Microsoft has published an article addressing this issue. It is not planning to release a fix for this issue. But we could implement one of the following workarounds:
Install and run Report Builder 3.0 of SQL Server 2008 R2 RTM.
Install and run Report Builder of SQL Server 2014.
Uninstall Service Pack 3 then uninstall Service Pack 2 and then reinstall Service Pack 3.
Reference:
Report Builder of SQL Server 2008 R2 Service Pack 3 does not launch
Thank you for your understanding.
Best Regards,
Wendy Fu

Authorization error when exporting business system

Hi ,
I am on XI 7.0 spo9.I am trying to transport from dev to qa .
I am able to easily export (login using xisuper ) Technical system.
However while exporting Business system .when it gives me to download a file I get an authorization error .
Kindly help

Hi,
Check XISUPER has the below roles in SU01.
SAP_BC_AI_LANDSCAPE_DB_RFC
SAP_SLD_ADMINISTRATOR
SAP_SLD_CONFIGURATOR
SAP_SLD_DEVELOPER
SAP_SLD_ORGANIZER
SAP_SLD_GUEST
add the above roles for XISUPER and get the green color those roles using Tcode : PFCG.
The above roles should be in green color.
Regards,
Venu.

No Authorization error in executing a planning sequence

Hi,
We are using BI 7.0 Integrated Planning.
We have implemented Mark Bernaud's file upload solution. We have used a planning sequence that uploads the file and stores it in a cube. Using it, we are able to upload files without any problem when executing with a SAP User Id which has all the authorizations (the user id has SAP_ALL specified in its list of profiles). Now, we have a requirement where we need to execute the file upload using a user id which has limited authorizations. When we are trying to execute the file upload with the userid that has limited authorizations, we are getting the following authorization error.
'You are not authorized to execute sequence PL_SEQ_FL_UPLOAD'
where PL_SEQ_FL_UPLOAD is the name of planning sequence we are using. We have also included the authorization variable in the filters being used as suggested in one of the blogs but this didn't help.
Could anyone please let us know the authorization objects to be added to the user id to enable access to this file upload.
Many Thanks,
Narendra.

Thank you very much Diogo,
The objects you suggested were already there. We have successfully traced the error by switching on the trace using ST01. We found the reason for the error to be that display authorization is not provided for S_RS_PLSQ whereas execute authorization is already present for that.
Once again thanks Diogo.
Many Thanks,
Narendra

Authorization Error while executing Workbooks,

Dear ALL
We have authorization in place where users are restricted to execute Workbooks PLANT wise.
For this 0PLANT is kept authorization relevant.
0PLANT__0COMP_CODE is Navigational Attribute of 0PLANT also marked as authorization relevant.
Till now all user were assigned the Analysis authorization A_PLNT_XX as 0PLANT = XX
But suddenly now the users are getting authorization error of NOT BEING AUTHORIZED .,
The error log is as shown below.
Relevant Characteristics for Detailed Authorization Check
(Characteristics with Full Authorization Are Not Listed!)
List of Effective Authorization-Relevant Characteristics for InfoProvider ZMMIMMP05:
0PLANT
0PLANT__0COMP_CODE
0TCAACTVT
Subselection (Technical SUBNR) 1
Supplementation of Selection for Aggregated Characteristics
Check Added for Aggregation Authorization:     0PLANT__0COMP_CODE
Authorizations missing for aggregation (":")
Characteristic 1
0PLANT__0COMP_CODE    Empty
Entries marked with red do not have aggregation authorization
You can find more information about this here 1140831
The authorization check stops here as this selection is no longer needed
Message EYE007: You do not have sufficient authorization
No Sufficient Authorization for This Subselection (SUBNR)
Following CHANMIDs Are Affected:
51 ( 0PLANT )
Authorization Check Complete
Please let me know the reason for the same.
Also How can i track these changes to avoid such errors
Regards,
Ajit

Hi Ajit,
The authorization log has been improved constantly and try to make it easy to understand.
It says:
Authorizations missing for aggregation (":")
Characteristic 1
0PLANT__0COMP_CODE Empty
Entries marked with red do not have aggregation authorization
You can find more information about this here 1140831
So please click the "1140831" which is a hyperlink bringing you to OSS note 1140831.
The note says:
1140831 Colon authorization during query execution
Part 1: Description of the authorization check
You require aggregation authorization ("colon authorization") to view
the values of an authorization-relevant characteristic in aggregated
form. What does this mean exactly?
Example:
The calendar year (0CALYEAR) characteristic is authorization-relevant
and is contained in the InfoProvider that is in use. You defined a query
as follows:
1. 0CALYEAR is in the free characteristics (not in the drilldown)
    without any selections
- or -
2. 0CALYEAR does not exist in the query at all.
In both cases, no 0CALYEAR values are displayed in the query. Also, the
query is not restricted to any 0CALYEAR values. A colon is required for
the authorization check in this situation.
The note contains some more detailed explanation. You could read through it to understand the concept.
Regards,
Patricia

Authorization error while regestring developer in SSCRkeys

Hi All,
iam trying to register developer in SSCR keys to generate acess key .
iam getting authorization error
How to Register SSCR keys authorization.
pls help me out ....
solutons appreciated
John

Hi juan,
iam getting Authorization Error!
Currently you do not have authorization to use this function. To request the authorization, please contact one of the administrators at your company:
do i need to register for sscr authorization.
solution appreciated
Regards
John

Intergration Builder: Authorization error

Similar Messages

Maybe you are looking for