INTERGRATION of ASSETS INTO ERP HCM

Implemented the asset management solution in SAP FI. There's a tab on transaction AS01 -TIME DEPENDENT which caters for an employee number to be loaded.
I need to have that intergrated to HCM to reflect against ITY 0040 9objects on loan).
Kindly assist.

Hi Misbah,
What does your MXML look like for loading the Xcelsius SWF?
Adobe Flex itself has known issues loading child SWFs (some can be worked around using a new domain when you load the SWF).
To try loading with a new domain set the loaderContext to:
new LoaderContext(false, new ApplicationDomain())
Regards
Matt

Similar Messages

  • BADI_IDM_HR_COMMUNICATION update employee data in the SAP ERP HCM system.

    Hi Guys,
    I am using SAP identity management 7.1 and ERP ECC 6.0 EHP4. I amanage to pull data from HCM into identity store and create an account in active directory.
    I am now trying to update employee data in the SAP ERP HCM system with the email address using Business Add-In (BAdI) Implementation BADI_IDM_HR_COMMUNICATION of BAdI definition BADI_EXTEND_IDENTITY.
    I do not know how to call the BADI from SAP identity management.
    Can you please help as i need this to finish the user provisioning ?
    Many thanks

    Hi Scott,
    Thank you very much for your help.
    I am working on trying those steps. I will let you know the result.
    in this document you sent me above  they mentionned "see IC-supervisors-guide.pdf that is delivered within the installation.
    I did a full search on the install and could not find it.
    Have you seen this file before ?
    Many Thanks

  • Division of 1 Asset into seperate Assets

    Hi Professionals
    We have 1 Asset which is Acquisited 2 years back and we have run Depreciation also and its useful life 5 years.
    Acquisition Amount is 250000/- and Depreciation run is 130000/- and NetBookValue is 120000/-.
    And for some reasons We want to divide this Asset into 4 new Assets like this.
    AssetNumber  AcquisitionValue  AccumulatedDepreciation NBV
    Asset1 1001  62500  32500 30000
    Asset2 1002  62500  32500 30000
    Asset3 1003  62500  32500 30000
    Asset4 1004  62500  32500 30000
    Kindly let me know the How can i seperate that main Asset into 4 Assets.
    Where the Configuration i need to do for this.
    Regards
    Kumar Raja

    Hi ,
    Basd on the above mentioned requirement there are two options which can be done regarding the splitting up of asset into seperate asset .
    1. for the existing asset create subnumbers using tcode: AS11 , and transfer the acq value from the existing asset to prsent asset using ABUMN and mention the percentage ,if the asset captilization date for individual asset has to be changed then while creating the asset using tcode: AS11 check the post-capitalization check box.
    2. Create individual asset similar to the existing asset and transfer the required percentage to all the other asset  , check should be done on the asset valu date and the dep key assigned to the deparea for that particular asset.

  • SAP ERP HCM

    Hi all,
    We have to implement SAP ERP HCM component in our system
    Can anyone please help me out with that
    Rohit

    Hi Rohit
    You can give a try check at [Market place|https://websmp207.sap-ag.de/hrpay]
    Regards
    Uday

  • Placed FW asset into Muse. Original Size = 908w x 2323h. Muse auto resampled to 800w x 2048h. I need the asset to remain at Original Size. How do I override the resample?

    Placed FW asset into Muse. Original Size = 908w x 2323h. Muse auto resampled to 800w x 2048h. I need the asset to remain at Original Size. How do I override the resample?

    Hello,
    Its a Muse property to re-sample any asset that is more than 248 px.
    To get rid of re-sampling do the following
    1. Please click on the image and Make Sure Image Frame is selected.
    2. Go to The Transform tab and change width and height to the original values. (now you will observe that the width and height of image frame is changed but not the Image)
    3. Double click on the image and make sure Image is selected with a red selection around it.
    4. Go to The Transform tab and change width and height to the original values. (now you will observe that the width and height of image frame is same as  the Image)
    5. Now go to the assets tab > right click on the asset > select "Import larger size".
    Now this asset will always be imported in original size.
    Regards
    Vivek

  • Transfer ERP HCM data per IDoc

    Hello,
    i want to distribute data from ERP HCM with report RHALEINI.
    The IDoc is a reduced IDoc of HRMD_A.
    It's working fine but i get almost 500 resulting IDocs and it would be better to have just one IDoc.
    Is this possible?
    If it's not possible there are 2 problems:
    1) Not all IDocs receive at XI
    2) I have to collect all IDocs and will need a some kind of correlation and don't want to use BPM (only if it's there is no other way)
    Why do i get so much IDocs anyway? Has it to do with a maximum size of IDocs?
    Regards
    Patrick

    Patrick,
    Is this HR data replication is initial replication. or just updation. If it is for updation just mention the required infotypes. Generally if you are replicating entire data, there is an order to replicate. I do'nt remember all the objects types. the main object types sequence like,O, S, CP, P, C...
    Usually we used to face the problems, if u mentioned the size as 200. If the idocs for object type 'C' the segment size will be 50000 something like that. always it is easy to process the more idocs with less amount of data. If you get big idocs, you will be facing the status 52. which is partially data posted.
    | Naveen

  • No Upload into ERP: TCM Claims

    SYSTEMS: CRM 7.0 / ECC 6.0
    We are trying to replicate the status of claim submission documents to Dispute Cases but receive the following two errors when the BDoc is generated:
         No upload into ERP
         ERP adapter is called
    This occurs only when sending CSD complete status to ECC in order to close the corresponding Dispute Case.  This issue appears to only happen in our QA system but because we have made some status definition configuration we cannot test to move to our production box because the BDoc will not replicate.  We do not have any issues with Dispute Cases transferring to CRM to generate the CSD.
    SMOEAC:
    All Business transactions - active.
    CRMPAROLTP:
    appears to be setup correctly
    Any thoughts or suggestions would be greatly appreciated so we can complete our testing and move our changes to our production environment.

    hi ,
    can u pls tell me the solution if any you got.

  • ?Best 'simple' format to import assets into DVDStudio?

    I was told to output my FCP4 movie with compressor and do it in two parts: video only then do audio separately. So I've got an mpeg2 video file and an aiff file to bring into DVD Studio Pro (3).
    However, when I lay the files into my track (in DVD Studio Pro), I've noticed a synch problem. There doesn't appear to be any way to lock the video and audio together as they were in FCP.
    Am I missing something simple, or was compressing video and audio into separate files a bad idea?
    Lisa
    PS. I'm really sorry if this is a stupid question. I have looked thru the manuals and can't find a simple instruction about getting movies out of FCP4 and into DVD Studio.

    I don't have dvdsp 4 or compressor 2. But I think we have that a.pack thing. But, before I try that, can you help me with a more basic thing..
    I'm still concerned about actually dragging the assets into the timeline. When I drag my audio file (whatever format) and my video file to the track window DOES DVDSP3 "KNOW" THAT THE CLIPS ARE CONNECTED AND SHOULD LINE UP EXACTLY? In FCP you can drag a clip and it automatically separates the video and the audio tracks and keeps them in synch (unless you bump them!!!). But, DVDSP doesn't seem to have a way to take the two separate assets and keep them locked together (unless it just does it automatically). But it sure is easy to bump the audio asset and get the whole timeline out of synch.
    Then from what I can tell from the other discussions, there are issues with PAL & NTSC and the frame rates and audio bit rates and all kinds of other confusing things . I guess that shows up further down your movie as things all get out of whack. I'm assuming that your response address those issues.
    Is there a way to import an asset that is Sound and Vision from one file and let DVDSP split them out to the right tracks like FCP does? Or all all DVDSP assets supposed to be video or audio only.
    Thanks again!
    Lisa

  • EREC: are external user identities (candidates) stored in ERP HCM server?

    we are planning to deploy e recruiting as standalone in the DMZ integrated with the ERP/HCM in the backend.
    are external user ids (candidates) stored in ERP/HCM instance?
    Thanks,
    T.

    Hello Tiberiu,
    External candidates are only stored in the E-Recruiting systems and not in the sepearte HR system (only if E-Rec an HR system are different systems).
    Regards
    Nicole

  • Guidelines to upload Assets into DAM

    Hi,
       We are in a process of uploading Assets into CQ DAM (AEM 5.6).
    Example folder struture is:
    /content/dam/exercises/test/
    What is the recommended Assets limit that we can upload in 'test' level dam folder.
       I've seen in the google groups that Adobe receomends don't use more than 200 to 250 assets at one level. But we are uploading around 5000 images in a single folder. If it is not recommended, can any one let me know the best practice.
    Thanks
    Siva

    Hello Siva,
    There are various way and completely depends on your project requirement. Offcourse it is not suggested to keep that huge number of file in a single folder. Here i can suggest one good approach which i normally used is as below.
    1. Categorized those assets if possbile lets say based upon your business areas or anything similar. Based on that create your high level of folders
    2. Now under all these folders create sub folders hierarchy like a, aa, ab ac... and b, ba, bb, bc ... and c, ca, cb, cc  and after some level of depth store your assets which makes each folder to have assets in between 100-200.
    I hope above will help you do make some decision.
    Thanks,
    Pawan

  • Mass transfering of assets into another depreciation book

    Hi All
    Please clarify my below query.
    when an asset was initially capitalized in the wrong asset class. Asset master in the correct asset class should first be created and thereafter the values will be transferred via the transfer within company code function in the Fixed Assets module.
    For example, 10 units of laptop were initially capitalized in one asset master with IT cost centre. If 5 units of the laptop need to be transferred to Finance cost centre, a new asset master in the same asset class will be created and partial transfer will be carried out for 5 units to the new asset master.
    1. is it possible to mass transfering of assets into another depreciation book if yes.
    please provide me the necessary steps to do the above activities.
    Thanks & Regards
    K.Gunasekar.

    Hi,
    It seems like you have an asset, with 10 Qty in an asset master.
    Try to do asset partial transfer with ABUMN for 5 qty.
    Hope this might help you.
    Cheers,
    Srinu

  • ERP HCM

    Hi Guys,
    I wann know the difference between ERP HCM and HR.
    And also,wann know the config involves in Implimenting  HCM
    Appreciate you help,
    Rakhi

    Hi Rakhi,
    You can refer to the below mentioned thread and links. This will answer both of your queries.
    Difference between HCM and HR
    /people/sergey.breslavets/blog/2008/06/13/how-to-manage-processes-effectively-with-hcm-processes-and-forms
    /people/christopher.solomon/blog/2008/06/30/hcm-processes-forms-gotchas-bugs-and-other-curiosities
    /people/christopher.solomon/blog/2008/03/26/hcm-processes-forms-whats-new-and-cool-in-enhancement-pack-2
    http://help.sap.com/saphelp_erp60/helpdata/EN/fe/1bd54243063658e10000000a155106/frameset.htm
    /people/sap.user72/blog/2006/03/08/sdn-breaking-news-the-hcm-corner-of-sdn
    Regards
    Neelima

  • How to package assets into a single swf

    Is there a setting or a process I need to follow to ensure that all of my assets are bundled into my swf rather than having them in separate folders that I have to add to my website?

    Yes, you must embed them rather than load them from a url at runtime:
    http://www.adobe.com/devnet/flex/quickstart/embedding_assets/

  • Connecting SAP E-Recruiting with SAP ERP HCM via PI 7.10

    Hello guys,
    i am currently working on connecting a SAP E-Recruiting and a SAP EPR 6.0 (HCM) via a SAP Netweaver PI 7.10 SP6 (Its a Proxy-to-Proxy Connection). For this i have created a more or less detailed How-to Wiki page. As i am not a PI/XI Expert at all - but i am always eager to learn I have some difficulties and i have hoped that you may help me out so i can complete the guide and so help others who also have some difficulties in setting up the scenario.
    For what i have already done, please check out the Wiki page i have created.
    One question i do have is, where can i monitore the send process.
    I mean i am executing the proxy-call in the sender system (E-Recruiting) but nothing happens (no error message)
    Also please take a look the RFC Destinations i have created for the Communication Channel. Not sure in which system i have to create those Destiantions and where they should point to.
    Here is the Wiki (still working on layout issues)
    https://wiki.sdn.sap.com/wiki/display/profile/HowtoConnectyourE-RecruitingwithyourHCMviaNetweaverPI+7.10
    best regards,
    Markus

    Hi Li,
    I am the Product Manager for SAP E-Recruiting. I'll try and give some direction.
    SAP E-Recruiting uses no functionality from the existing SAP recruitment module, and has a new data model. For HR releases before ERP2004, SAP E-Recruiting can only be deployed on a separate instance to HR, and integrated using a combination of ALE (qualification catalogue, employees, organizational units, jobs, and positions) and RFC calls (for moving candidate to be hired into HR).
    If you have ERP2004, then you can have E-Recruiting on the same instance as HR. There are advantages and disadvantages to this including, security, sizing, etc. We can discuss this if you consider this an option.
    If you have E-Recruiting on a separate instance to ERP2004, then you can also display or use organizational data using supplied data extractors. These are great for easily pulling HR data. In the standard they are only used to display information based on the job/position (example: current position holder) but they could also be used in custom workflows, job postings, etc.
    With ERP2005, employee qualifications will also be available in E-Recruiting, as well as the possibility of defaulting qualifications on the requisition, based upon the job or position.
    I hope this helps. Please feel free to ask more questions.
    Best wishes, Mark

  • Degree Date not mapped into Peoplesoft HCM 9.2

    We have installed PeopleSoft HCM 9.2 and People Tools 8.53.We are using PeopleSoft HCM 9.2 Demo database in our test environment.We have integrated our Resume Parsing solution with PeopleSoft HCM 9.2.Our Parser is capable of extracting degree date from the resume content.We are finding issue with Mapping "Degree Date" into respective field.
    We are trying to Map the "Degree date" as field in Degree section in Poeplesoft HCM system using HR XML mapping  as per Recruiting_Solutions_9_2_Integrations_Setup.pdf documentation.
    XML LOCATION                 : Candidate.Resume.StructuredXMLResume.EducationHistory.SchoolOrInstitution.Degree.DegreeDate
    DATA OBJECT LOCATION  : CandidateItems.. JPM_DATE_6
    RECORD LOCATION           : HRS_APP_ITEMS. JPM_DATE_6
    Oracle Recruiting solution document says "Degree Date" is mapped to "HRS_APP_ITEMS.JPM_DATE_6" field in Peoplesoft HCM 9.2 Application. (Please Refer page no 65 ).
    We are finding that this mapping is not happening as expected
    Does anyone know how to resolve the issue ?

    As stated in the following doc, this issue has been solved in PeopleTools 8.53.04 patch
    E-SES: Problems Deploying Search Definition With PeopleTools 8.53 And Oracle SES 11.1.2.2.0 [ID 1558997.1]

Maybe you are looking for

  • Dynamic Configuration key length

    I am using dynamic configuration to set certain JMS properties but it appears that the maximum key length is 20 characters. Has anyone experienced this problem.  Is this a bug? Thanks Here is my code DynamicConfiguration conf = (DynamicConfiguration)

  • ABAp program terminated before Start selection event

    Hi all, I have the issue, for one user with window vista, my program always teminate before program go to start-of-selection event. But if I use my login name in his PC, the program will run perfectly. And If he use his user ID in other PC the progra

  • IPad mini 2 iOS8 alarm when USB connect to MacBook Air iTunes 12

    I have a new MacBook Air 13" (OS X V 10.10 1.7 GHz i7) with iTunes 12.0.1 and Yosemite 10.10.  I was able to sync and back up my iPhone 5 (iOS 8.1).  When I plug my iPad Mini Retina (iOS 8.1) it dings and shakes the battery status icon repeatedly and

  • ERROR at line 1 ORA-04042 when I was upgrade 2.2 App Express to 3.2!

    Hi all, I was download Apex 3.2 and unzip it into C:\Apex folder. I was installing Application Express 2.2 on C:\oraclexe and working fine. I was changed on C:\Apex\apexins.sql PREFIX for C:\apex\apexins.sql and DATTS='^2',FF_TBLS='^3' TEMPTBL='^4' I

  • Disallowing search engines to cache the pages

    Hi I want my web site pages which should not cached by any search engine or any other site. I am currently using meta tag to solve this issue. Ofcourse this is not reliable method.Can any of you suggest me the better solution. Thanks & Regards, Prasa