Interim patch vs database patch
Hi,
I want to know the exact difference between Interim patch and database patches.
First of all my understanding is that ,Database patches are applied for some ORA-related errorrs as suggested by document id.where as interim patches are applied on ORA_HOME.
plz correct me if i am wrong?and give me complete details about them.
Also i want to know,is there any database patch for ORA-1555 error?
Thnx
791902 wrote:
Hi,
I want to know the exact difference between Interim patch and database patches.
First of all my understanding is that ,Database patches are applied for some ORA-related errorrs as suggested by document id.where as interim patches are applied on ORA_HOME.
plz correct me if i am wrong?and give me complete details about them.All patches are applied on binaries i.e. ORACLE_HOME and some patches also have some scripts to be run to update data dictionaries.
For interim patch explanation please refer to MOS :
Oracle Data Server Interim Patch Installation (OPatch) [ID 189489.1]
Also i want to know,is there any database patch for ORA-1555 error?ORA-155 occurs due to undo tablespace.
check MOS note :
TROUBLESHOOTING GUIDE (TSG) - ORA-1555 [ID 467872.1]
You can also check :
http://www.dba-oracle.com/t_ora_01555_snapshot_old.htm
Regards
Rajesh
Edited by: Rajesh on Sep 7, 2010 4:29 PM
Similar Messages
-
How to differentiate IAS ORACLE Home Patches and database patches
Hi Team,
I would like to know how to find out the difference between IAS ORACLE Home patches and Database patches.
I am new to oracle apps.
Please let me know.
Thanks,
Kamaluser10493335 wrote:
Hi Huseein
Here is the patch number Patch 13919058
we are on e-business suite 12.1.3.How to integrate oracle e-business suite with ODI.
Thanks,
KamalIt should be applied to ODI ORACLE_HOME -- How To Install Oracle Data Integrator (ODI) 11g Interim Patches (PSE) With OPatch [ID 1235136.1]
Thanks,
Hussein -
10.1.2.0.2 OID not listening after database patch 10.0.5
Hi
I've installed database patch 10.0.5 to an Oracle Infrastructure 10.1.2.0.2. The software and scripts installed with no problems. I started the OID server using:
opmnctl start process-type=OID
Which always worked before and it returns with no errors. But OID is not listening on port 389. dcmctl start will throw an error trying to connect to OID.
Any ideas?The readme for the patch has very detailed instructions !
OID needs to be up as you say plus the other components. But there is a good prereq checker before you run it.
If worried do a backup of $OH , the inventory and the IASDB then give it a try, if it fails just restore. -
Can i patch oracle database on RAC and not patch the RAC software
Hi there
Kindly advise on implications of doing the following
1 i have oracle cluster version 10.2.0.1.0 running 2 nodes
2 i have database version 10.2.0.1.0
i have 4 different databases
I want to patch only one database
question !!
Can i patch the database to 10.2.0.4 on both nodes with out patching the cluster software ?
I' m doing this in order to fix a bug that is messing the live Db
Is That possible
Please answer
Thanks
FrancisCan i patch the database to 10.2.0.4 on both nodes with out patching the cluster software ? Can you? yes
Should you? NO -
Issue after Oracle database patch upgrade 10.2.0.4
Hello,
After database patch application 10.2.0.4, we are getting error in starting database from 'startsap' script from sidadm user. We are getting this error in all the systems.
FYI...Once Oracle start explicitly, then there is no problem for starting SAP.
Please find the error below & let us know the path forward.
DQESAP05:dpiadm 24> more /home/dpiadm/startdb.log
50y0C
Wed Mar 4 12:19:41 IST 2009
LOGFILE FOR STARTING ORACLE
Trying to start DPI database ...
Wed Mar 4 12:19:41 IST 2009
checking required environment variables
ORACLE_HOME is >/oracle/DPI/102_64<
ORACLE_SID is >DPI<
Wed Mar 4 12:19:41 IST 2009
check initora
Wed Mar 4 12:19:41 IST 2009
check initora
Wed Mar 4 12:19:41 IST 2009
checking V2 connect
TNS Ping Utility for HPUX: Version 10.2.0.4.0 - Production on 04-MAR-2009 12:19:41
Copyright (c) 1997, 2007, Oracle. All rights reserved.
Used parameter files:
/usr/sap/DPI/SYS/profile/oracle/sqlnet.ora
Used TNSNAMES adapter to resolve the alias
Attempting to contact (DESCRIPTION = (ADDRESS_LIST = (ADDRESS = (COMMUNITY = SAP.WORLD) (PROTOCOL = TCP) (HOST = DQESAP05) (PORT = 1527))) (CONNECT_DATA = (SID = DPI) (GLOBAL_NAME = DPI.WORLD)))
OK (10 msec)
tnsping: V2 connect to DPI
Wed Mar 4 12:19:41 IST 2009
Connect to the database to check the database state:
R3trans: connect check finished with return code: 12
Database not available
Wed Mar 4 12:19:42 IST 2009
Shutdown database
First trying to shutdown the database - May be,
the database is in the nomount or mount state
50y0CBstartdb.log (66%)@50y0C50y0C----
Wed Mar 4 12:19:50 IST 2009
starting database
SQL*Plus: Release 10.2.0.4.0 - Production on Wed Mar 4 12:19:50 2009
Copyright (c) 1982, 2007, Oracle. All Rights Reserved.
Connected to an idle instance.
ORA-00119: invalid specification for system parameter LOCAL_LISTENER
ORA-00132: syntax error or unresolved network name 'LISTENER_DPI'
Disconnected
Wed Mar 4 12:19:51 IST 2009
Connect to the database to verify, that the database is now open
R3trans check finished with return code: 12
ERROR: Startup of database failed
Notify Database Administrator.
/usr/sap/DPI/SYS/exe/run/startdb: Terminating with error code 12
It is not able to get below information
"ORA-00119: invalid specification for system parameter LOCAL_LISTENER
ORA-00132: syntax error or unresolved network name 'LISTENER_DPI'"Hi,
Please find few links below:
[Re: Oracle 10g upgrade - DBUA DB is not started]
[https://websmp130.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/sapnotes/index2.htm?numm=403004]
[https://websmp130.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/sapnotes/index2.htm?numm=819829]
Hope this helps.
Manoj -
Hi all,
After succesfully installing EP SP2 with patch 29 and CM patch 4 too after that, I wanted to upgrade CM to the last patch too.
I first deployed patch 5 for CM, succesful operation, but after that the documentation guide showed to apply the patch 5 for database (included in this CM patch)
During the patching of oracle instance I had the following error:
DROP INDEX "IX_CMCC_TABLE1"
ORA-01418: specified index does not exist
followed by exception.
I have a look on oracle errors, but dont know how to solve it.
Can someone help me solving this, because I havent done a backup to my database, but only to the instance used.
When I logon in the portal after that in the KM Content it gives an exception saying is waiting for a patch.
Best regards,
Raluca.Hi,
I am having the same problem.
Did you maybe find a solution for this? -
Hi:
I need to apply a CPU patch for database. Should I shutdown apps and database. EBS is 12.1.3, db is 11.1.0.7, Linux.
An ASM instance resides on the same box as the database I am going to apply the patch. Should I shutdown the +ASM instance?
Thank you.Husien:
An ASM instance resides on the same box as the database I am going to apply the patch. Should I shutdown the +ASM instance? -
Hi plz help me.
i want to learn oracle database patching from the people like u but before that i tried much hard to find the documentation of patching at oracle documentation center. now after searching it lot i m tired so plz can any one tell me the exact documentation by which i can learn patching for applications. plz help me.
nikhilThe patch(set) documentation is included in the patch zip file. The best way to learn about patching database should be to build a test db, then try to patch/upgrade it.
Nicolas. -
CMCOLL patch 4 hotfix 8 : database patch
hi,
I applied the CMCOLL patch 4 successfully. Now i want to apply hotfix 8 to it. In hotfix there is 1 DBPatch available. Acc. to SAP note 786452: <b>This DB Patch of Hotfix 8 patches DB to level 'SP2.CM.SPs'.</b> And my current database patch is <b>SP2.CC.2</b> ....
Current CM version:
CM_COLL version=60 SP2 Patch 4
Current portal version:
version=6.0.2.4.0
ne precautions .... or suggestions ......
reply ASAP
rgds,
Nilz
Message was edited by: nilzDoes this patch creates or deletes any table? .... coz i am planning to take backup of table space and not of full database .... but if this HF creates or deletes any table then i'll take backup of full database .... so tht i can restore it later in case of failure of the patch ....
rgds,
Nilz -
Hi all
11.2.0.3
Aix 6.1
I am new to this company. My boss give me task to apply all the patches not yet applied to our databases which is recommended by Oracle, and
bring our database to the latest patch available in the MOS. This is mandated by the corporate auditor to bring our database to the latest patch
specially the security patches. My boss mentioned all the RDA, PSU, One-off patches should be applied. Where can I find the inventory of latest patches
in MOS? How many types of database patches are there? What do you mean by RDA, PSU, and One-off? What do you call the patch 11.2.0.3.5 ? is it one-off/rda/psu? I also download patch 11.2.0.3 and I found it to be 5Gb in size? Am I getting the right file?
Thanks a lot,
zxyyxes2013 wrote:
I thank you all,
My question is where can I download or find these quarterly patches generated by oracle? Is an email sent to the members that the quarterly security patch is already available? To which folder should I download it from?
Where you think you can download the patches from? You should be knowing this by now since you have spent a lot of time on the forums already . The patches are distributed from My Oracle Support and needs a valid CSI before you attempt to login to that website. If you are a valid customer, you would get email from MOS. To which folder you should download it from, well not from a folder but from a website MOS.
Aman.... -
Oct 2011 cpu patch for database on solaris
Hi All,
I have query regarding oct 2011 cpu patch
OS:SOLARIS 5.10,sun4u sparc SUNW, Netra-T12 release update 10
RDBMS:10G 64bit
am looking for latest cpu patch can any one provide the patch number
thanks in advanceModerator Action:
Already asked in the Database forum:
oct 2011 cpu patch for database on solaris
... and already answered in that same database forum thread.
Locking.
Edit:
In the context of this thread, "cpu" refers to Critical Patch Update (CPU)
such as this , which was found in about 20 seconds using the search function on the Oracle home page.
Edited by: rukbat on Jan 3, 2012 2:01 PM -
Operating System And Database Patch
Hello everyone,
Does Sap have a specific note about operating system and database patch management? It is important for
me for applying operating system and database patches.I'm not exactly sure what you're asking about but usually the operating system vendors have to make sure that applications work as before after a patch.
Since SAP applications run on many different combinations of operating systems and databases together with different kernels and/or database clients it's impossible to test them all in all combinations.
SAP has no notes with "don't use Hotfix A,B,C on your Windows machine together with Hotfix D or E on the database server"; known issues are listed in the notes for the patches themselves (on the vendors websites, not SAP).
Markus -
Hi All,
Suppose i have applied a patch on database using Opatch. If i want to rollback the already applied patch, can i use the command mentioned below...
opatch rollback -id patch number
Please let me know a confirmation on this....
Thanks,
ManikandanHi;
Hussein Sawwan is already give you correct response In addition to his great post, each db patch has roolback section in readme part which you can see what command u need to run how you check patch roolback etc
Regard
Helios -
I have installed 9.2.0 & then applied 9.2.0.6 patch.
Please let me know, how to find the applied patches & the patches to be applied on the database.
Thanks in advance...!I have installed 9.2.0 & then applied 9.2.0.6 patch.
Please let me know, how to find the applied patches &Run following command to get patch installed
opatch -lsinventory
the patches to be applied on the database.
Check metalink -> patches & Upgrades for patch to be applied
and following link
http://www.oracle.com/technology/deploy/security/alerts.htm
Virag -
Urgent: patched crs bundle patch #3. CRS not starting up
hi,
i had patched the 7117233 patch bundle. everything went fine on my rac . the database version is 10.2.0.3 i updated the crs to 10.2.0.3. with the patch,
i had issues with te post patch but it was some permission issue and it worked out.
but now the last :
custom/scripts/postrootpatch.sh -crshome /app/oracle/product/10.2.0/crs
Checking to se if Oracle CRS stack is already up...
Checking to se if Oracle CRS stack is already starting
/etc/init.d/init.cssd: line 320: /tmp/oratz.30171 : No such file or directory
/etc/init.d/init.cssd: line 320: /tmp/oratz.30193 : No such file or directory
/etc/init.d/init.cssd: line 320: /tmp/oratz.30215 : No such file or directory
/etc/init.d/init.cssd: line 320: /tmp/oratz.30240 : No such file or directory
/etc/init.d/init.cssd: line 320: /tmp/oratz.30262 : No such file or directory
Startup will be queued to init within 30 seconds
it has been freezed as such for more than 10 minutes .. Has not start up!
any sorta help will be most appreciated !
regards
Susan Juser10758089 wrote:
Hi Susan,
2 possible solutions:
1. as root user, "chmod -R 777 /tmp" and retry start CRSdon't set it to 777 as it would lead to a security nightmare.
the problem is indeed a permission problem. the script tries to write to the file as user oracle and to remove it afterwards. the error message is from the removal.
check, if oracle user can create files in /tmp and if not fix it by setting the proper permissions which are 1777 (drwxrwxrwt).
regards,
-ap
Maybe you are looking for
-
Have to manually choose wireless network every time I turn on my Macbook
I am using a Macbook Pro for a few days now and it seems that every time I turn it on, I must manually select my wireless network before it will connect. How can I get the computer to do that automatically? I have tried what seem to be all the networ
-
DBIF_RSQL_SQL_ERROR using transation MB25
We are getting the above error. On closer examination of the dump: Database error text........: "Resource limit exceeded. MSGID= Job=168917/PRO03/WP02" Internal call code.........: "[RSQL/OPEN/RKPF ]" Please check the entries in the system log (Trans
-
Hi guys, I recently bought a lenovo A6000 smartphone. Whenever i receive a call it is not showing any Caller ID details(not even Caller's Phone number). It is showing as Unknown caller and in details there is no information regarding phone number. Ca
-
Having trouble with post install
After i install Solaris 10 x86 on my Compaq it keeps saying that X server cannot start on display 0 what can i do?
-
HT201269 i have to reset my iphone 4 to factory settings
so frustrated. i bought a used iphone 4. after my broke. please just tell me how to reset it to factory settings. why do u have to make it so hard