Interlace Deinterlace Export and Youtube Problem

We bought a nice new high end consumer camera - the Panasonic HC X900M . For the price of about $800 this little camera shoots sharp, crisp, colorful, high definition video. My son is spending a year in China and did not want a large camera. Anyway....
It shoots in these modes I believe: 1080p and 1080i . So far so good. The video looks great. We get it into the computer. We did not want to buy a professional level video editing system / software.... So we have ADOBE Elements 10 (I believe it is 10 or 9). (I use CS6 and like Adobe editing.)
ELEMENTS does not work with 1080p. So we've decided to shoot in 1080i.
We bring the video clips into Elements. The settings for the project MUST MATCH the video shot... we understand that. The camera has different settings for 1080i shooting. They are HA HG HX HE = different mbps. (Here is a link to the specifications in case you cannot read the jpeg) http://panasonic.net/avc/camcorder/hd/x900_series/specifications.html
So we set the settings for the
project at 1080i DV. Can't remember if it was 60i or 30i ? (I don't have his computer here with me...I cannot verify exact project settings. We tried a few)
Does Elements support this camera's settings for video? In this case 1920 x 1080 60i ? (list above) Can Elements support any of these, and how? I assume so, but if one mode in particular should be used, please advise.
For testing we shot in HA I believe to get as much quality in 1080i. We edited a test sequence. It looks and sounds great, plays back just fine in laptop software. Then we export. (The goal is to compress down to the internet Youtube best quality.) We first go to export to Youtube / Web. But Adobe will not ACCEPT his user name and password. We cannot log on to Youtube. Yes, the password is correct. So that does not work. Strike one.
We decide to export to desktop. We try H.264 and try to set the settings correctly, but every attempt at every setting, results in bad interlaced video. Strike two. There are many many options for export settings. We have tried a great number of options.
Any settings suggestions to make this work? Besides deinterlacing every single clip on the timeline? Or is that the only option.
Is there any editing software you can recommend - not high end professional - that will work?
Thanks for the help.

Premiere Elements can definitely work with video from this camcorder shot in 1920x1080 AVCHD at 60i. It also appears that your cam can shoot in both stereo and 5.1 audio, both of which Premiere Elements can support -- but take note of which you select so that you can match these specs when you set up your program.
Currently Premiere Elements doesn't support 1920x1080 at 60p -- that consumer interest in that format is growing, so you may well see support for it in an upcoming version of the program.
Most professional video editors will work with 1080p60, including Premiere Pro CS6 and Vegas Pro.
As for the different quality levels of your video, that's your call. The program should be able to work with any of them. But if you want the best results, I'd use the highest bit rate/quality.

Similar Messages

PDF Export And Printing Problem

I am using VB 2005 and the Crystal Reports that is bundled with it. I have reports on my website in the Crystal Report Viewer. I have the tool bar showing the Export and Print buttons. When you try to print (or export to PDF) you get an error from Adobe Reader "Adobe Reader could not open 'AcrXXX.tmp' because it is either not a supported file type or because the file has been damaged (for example, it was sent as an email attachment and wasn't correctly decoded)."
I can see the file in my temp folder on my c-drive and the file (AcrXXX.tmp) does not contain a pdf instead it contains html for the report (including the report viewer). I tried deleting everything in my temp folder and I still get the error. My desktop is Adobe Reader 8.0 and IE 6 and Windows XP.
The same code will create the PDF on all development and test web servers just not on my production server.
I have no problem exporting a report to Word.

Hello Wendy,
if you are not too sure whether this errro is CR or VS related pls simply try to use one of our samples and see if you can export from htere or if you get the same error:
Sample site for NET:
https://boc.sdn.sap.com/dotnet/samples
general docu:
https://smpdl.sap-ag.de/~sapidp/012002523100005853792008E/walkthrough_supportfiles.zip
specific samples:
https://smpdl.sap-ag.de/~sapidp/012002523100006252712008E/csharp_web_smpl.exe
https://smpdl.sap-ag.de/~sapidp/012002523100006252812008E/net_web_smpl.exe

Export and import problems

i have 2 major problems importing my application from htmldb.oracle.com to my serevr at home.
1.
i export my application and thems from htmldb.oracle.com.
when i opened the sql export file i saw that all hebrew chracters was "jibrish".
how can i export my application with hebrew fonts ?
2. i tried to export and import xml data (my tables data).
the export xml file showing me the hewbrew data but when i import it to my tables it gets ????????? instead of hebrew.
i think it's the nls lang but i don't know what nls land i need and where to change it
(database ,enviroment....)
can someone help me with this problems ?
thanks
p.s
my db is 10.1.0.3
red hat linux as 4 on vmware 4.5
my nls parameters:
nls_language: american
nls_territory: america
nls_characterset: we8iso8859p1
nls_nchar_charcterset: al16utf16
thanks

Zvika,
I have two options that may work for you. First, define the fields that have Hebrew characters using the CHAR qualifier. Example, varchar2(30 char). That allows you to store double byte characters from other languages, and overrides the nls_length_semantics (byte default) parameter.
Or, you could set the nls_length_semantics to default to char. It definitely uses more space when the char qualifier is used, so it's probably best to override the byte default only when necessary.
Hope that helps!
Also, I posted the 'Blogging Tool for HTMLDB' question with the username 'aufan89', which I had to change because my email changed.
So my new username is now 'aufan1989'. I look forward to your email when you get your app fixed and posted onto HTMLDB Studio!
Thanks!

Safari 8 and Youtube problems

Hello there. I'm a new Mac user (iMac 21,5" 2,7 GHz quad-core with Yosemite) and I just noticed this problem with Safari and Youtube videos. Sometimes, not always, HTML5 videos stutter at the very beginning (less than 1 second from the start), and the buffer bar comes back to zero, causing a little pause. After this, the video runs smoothly without any other stuttering. It doesn't happen on Chrome or Firefox. I tried to clear the cache, uninstall Flash (flash videos are not affected...), but nothing changed. It isn't a connection problem, cause, as I said, everything runs fine on other browsers. Any idea? Thanks a lot!

1. System Preferences > Flash Player > Advanced > Delete All
Press the "Delete All" button.
2. Safari > Preferences > Privacy
Press the button “ Remove All Website Data”.

Ipad 2 and youtube problem?

Usually when you write something in youtube search box it gives u suggestions n u dont need to write the complete word or sentence..but this dont happen in youtube when i am using it on safari...i have to write the complete sentence...and this problem is not new...but if u use youtube on google chrome's app it works perfectly...but i usually use safari...and there is another problem..youtube buffers slowly on ipad even though my Wi-Fi signal is strong...tried everything reseting network settings, restarting ipad but no difference...any solution? :)

"Usually when you write something in youtube search box it gives u suggestions n u dont need to write the complete word or sentence..but this dont happen in youtube when i am using it on safari...i have to write the complete sentence..."
That doesn't happen when I use youTube thru Safari or the youTube app.. Typing into the search field provides suggestions.
"....and there is another problem..youtube buffers slowly on ipad even though my Wi-Fi signal is strong...tried everything reseting network settings, restarting ipad but no difference...any solution"
WiFi signal strength has nothing to do with Internet access speed. Slow buffering is usually caused by a slow Internet connection speed or Internet congestion or, sometimes, router problems. Measure your Internet speed using the SpeedTest App.

Facebook and youtube problems Nokia E5

i can't log in facebook and browsing videos by youtube using the WLAN connection.
facebook just keep waiting to log in and after all it fails to log in
and youtube just appear a screen with connecting and nothing happens
plz anyone help!
web browsing is working good but i cant open some pages like facebook ,youtube , twitter by the web browser !!!!

Go to ovi store if it's open & download the facebook apps its free you won't be needing the browser for that.
Knowledge not shared is knowledge wasted!
If you find it helpfull, it's not hard to click the STAR..

Export and import problem

hi i am having a test database 9i(9.2.0.1) on windows xp.i want to export a table from test database to development database which is 9i(9.2.0.6) on IBM AIX 5.2. till now i am able to export and import but suddenly i am getting 'TABLESPACE <tablespace name? doesn't exist' error.
the following is what i am getting
D:\>imp file=news.dmp fromuser='COUNTER' touser='IBT' tables='NEWS_MASTER'
Import: Release 9.2.0.1.0 - Production on Sat Oct 6 17:06:00 2007
Copyright (c) 1982, 2002, Oracle Corporation. All rights reserved.
Username: system@dev
Password:
Connected to: Oracle9i Enterprise Edition Release 9.2.0.6.0 - 64bit Production
With the Partitioning, Real Application Clusters, OLAP and Oracle Data Mining o
tions
JServer Release 9.2.0.6.0 - Production
Export file created by EXPORT:V09.02.00 via conventional path
Warning: the objects were exported by COUNTER, not by you
import done in WE8MSWIN1252 character set and AL16UTF16 NCHAR character set
import server uses US7ASCII character set (possible charset conversion)
. importing COUNTER's objects into IBT
IMP-00017: following statement failed with ORACLE error 959:
"CREATE TABLE "NEWS_MASTER" ("NEWS_DATE" DATE NOT NULL ENABLE, "SUBJECT" VAR"
"CHAR2(75) NOT NULL ENABLE, "DESCRIPTION" VARCHAR2(300) NOT NULL ENABLE, "PH"
"OTO" BLOB, "REG_NO" NUMBER(5, 0), "SYSTEM_IP" VARCHAR2(15) NOT NULL ENABLE)"
" PCTFREE 10 PCTUSED 40 INITRANS 1 MAXTRANS 255 STORAGE(INITIAL 65536 FREEL"
"ISTS 1 FREELIST GROUPS 1) TABLESPACE "TESTTBS" LOGGING NOCOMPRESS LOB ("PHO"
"TO") STORE AS (TABLESPACE "TESTTBS" ENABLE STORAGE IN ROW CHUNK 8192 PCTVE"
"RSION 10 NOCACHE STORAGE(INITIAL 65536 FREELISTS 1 FREELIST GROUPS 1))"
IMP-00003: ORACLE error 959 encountered
ORA-00959: tablespace 'TESTTBS' does not exist
Import terminated successfully with warnings.
help me i want to know what happend actually?and what may be the solution?
thanks in advance

tablespace TESTTBS doesn't exist in the database where your are importing.
Either create tablespace in target database or
use show=y option while importing to get table structure and create manually in target database then import and give ignore=y.

Exporting and YouTube Issues

So frustrated. For 6 months I have been able to export my iMovie videos to YouTube, no problem. I have also been able to export my iMovie videos into QuickTime format so they can be viewed on PCs without having to import them into iDVD. Now all of a sudden i can do neither. What is going on...seriously?
Anyone have a fix for either of these issues?

What happens when you try to share to YouTube? Is there an error message?
If you are still experiencing failures you might want to try (as a test) creating a new YouTube account and exporting one of your projects to the new account. That would help narrow down whether the problem is with iMovie or with your older/existing YouTube account.

Export and Upload problems You Tube

Hello,
I started using Final Cut Pro X recently and, after finishing some projects I decided to upload one of them on You Tube. The first time go so fine but there were some problems in the finally movie on youtube, like sounds and some white square.
Then I fixed the problem into the timeline and i tried to upload it again but there was another problem. I type the passworld, the name and the description but the button "Next" is always gray.
I think is because of I've already published it on you tube but it's weird that the Aplication doesn't let me export it again. The problem is only with youtube, in fact if i try to export as a .mov or on other social networks it goes well.
Please Some one help me!

Yes, if I export the file and upload it traditionally; it works but it's too slow: the upload started 3h ago and reached just the 29%!!!! On the other hand if I upload it by the in-app exporter in FCPX it goes faster!
I can't wait 24h to upload a foolish movie of 3minutes !
(I tried even to duplicate the project and share but it doesn't work)
However, thanks for help

CS4 Exporting and Importing Problems

Hey all,
I joined this forum specifically so I could ask this question. I have been looking all around and can not find the answer.
I have a Canon Vixia HF S10, with internal 32 gb memory, and am trying to import directly into Premiere Pro. Now, I have the media browser set up to AVCHD, and the icon next to the files is that filmstrip and speaker, showing that it knows it's video. However, when I try to drag it in, it acts like it's importing, and then pops up an error stating that the "Format is not supported". Now it says on Adobe that it IS supported, and I can import it elsewhere. I've tried re-installing it, using Clean Script, and nothing works! I've also updated it every time I've installed it, though I've tried without updating as well.
My other question is this: I want to export a project as a .dv or DV stream, and I cannot find an option for it. Simple as that. It also says that exporting as .dv is supported in CS4. What's the problem? Is there something I need to download for either of them?
I'm running it on a Mac, on Leopard.
Thanks a lot,
Nili.

I am having the same problem. The file extension that I am trying to import
is .mts - AVCHD format which Adobe does not seem to recognise. I have taken it from a panasonic camera. Camera makes no difference, it is the format in which the file is stored. I have also also opened up
a customer chat with technical support on adobe. Could it be something to do with missing codecs?

App store and Youtube problems

Hello, I have a 2g iPod touch which I have started having problems with the last week or so. I can open the app store, browse through all the apps and view them. I can access my iTunes account, but when I press the updates tab in app store, it comes up with the message "cannot connect to itunes". Also when I try to download an app, it won't download, it just appears and says "waiting..."
I also have the problem with the YouTube app. I cannot view any of the tabs at the bottom. It just comes up with the loading screen and then says cannot connect to youtube. I can access the YouTube website through Safari but when I try and play a video it says the video cannot be played.
I have updated to the latest software (3.1.3) tried restarting, and restoring my iPod but nothing seems to work. It could be a problem with my Wi-Fi or internet, but I couldn't access the app store at my friends house, using his Wi-Fi either.
Anybody had the same problem or got any suggestions as to how to solve it?
Thanks in advance.

If you read my post I mentioned that I restarted (turn on and off) and reset (restored to defaults), I have the latest software 3.1.3 and I have reset the network settings.

Export and packages problems

Hi folks,
when I export a db, Oracle logs some problems with sys packages.
My Oracle version is 9.0.2.7.0
Error messages are:
EXP-00008: ORACLE error 4068 encountered
ORA-04068: existing state of packages has been discarded
ORA-04063: package body "SYS.DBMS_RULE_EXP_EC_INTERNAL" has errors
ORA-06508: PL/SQL: could not find program unit being called
ORA-06512: at "SYS.DBMS_RULE_EXP_EV_CTXS", line 97
ORA-06512: at line 1
EXP-00083: The previous problem occurred when calling SYS.DBMS_RULE_EXP_EV_CTXS.grant_sysprivs_exp
EXP-00008: ORACLE error 4068 encountered
ORA-04068: existing state of packages has been discarded
ORA-04063: package body "SYS.DBMS_RULE_EXP_RL_INTERNAL" has errors
ORA-06508: PL/SQL: could not find program unit being called
ORA-06512: at "SYS.DBMS_RULE_EXP_RULES", line 97
ORA-06512: at line 1
EXP-00083: The previous problem occurred when calling SYS.DBMS_RULE_EXP_RULES.grant_sysprivs_exp
EXP-00008: ORACLE error 4068 encountered
ORA-04068: existing state of packages has been discarded
ORA-04063: package body "SYS.DBMS_RULE_EXP_RS_INTERNAL" has errors
ORA-06508: PL/SQL: could not find program unit being called
ORA-06512: at "SYS.DBMS_RULE_EXP_RULE_SETS", line 102
ORA-06512: at line 1
EXP-00083: The previous problem occurred when calling SYS.DBMS_RULE_EXP_RULE_SETS.grant_sysprivs_exp
EXP-00008: ORACLE error 4068 encountered
ORA-04068: existing state of packages has been discarded
ORA-04067: not executed, package body "SYS.LT_EXPORT_PKG" does not exist
ORA-06508: PL/SQL: could not find program unit being called
ORA-06512: at line 1
EXP-00083: The previous problem occurred when calling SYS.LT_EXPORT_PKG.schema_info_expO checked the DBMS_RULE* packages, and they are all invalid:
SQL> select owner, status, object_name, created from dba_objects where status = 'INVALID' and owner = 'SYS';
OWNER STATUS OBJECT_NAME                    CREATED
SYS    INVALID DBMS_RULE_COMPATIBLE_90        24/01/02
SYS    INVALID DBMS_RULE_EXP_EC_INTERNAL      19/09/06
SYS    INVALID DBMS_RULE_EXP_RL_INTERNAL      19/09/06
SYS    INVALID DBMS_RULE_EXP_RS_INTERNAL      19/09/06
SYS    INVALID ODCIARGDESC                    24/01/02
SYS    INVALID ODCICOLINFO                    24/01/02
SYS    INVALID ODCICOST                       24/01/02
SYS    INVALID ODCIINDEXINFO                  24/01/02
SYS    INVALID ODCIINDEXINFO                  24/01/02
SYS    INVALID XMLTYPE                        24/01/02how can I fix these packages without having to run whole CATALOG.SQL neither CATPROC.SQL? If this is the only way to fix the problem, can I use thes scripts from \ora_home\ora92\rdbms ?
Thansk in advance.
Alex

Hi,
I am afraid you may have to run catalog and catproc. If that doesn't help, then raise a SR.
Regards,
Satheesh Babu.S

CS6 Rendering and exporting, and clarity problems.

Alright. So I spent several hours editing, and relearning, Premiere Pro for a friends track video. During the whole process everything looked good, nice and crisp.
I made sure all of my work area was selected> went to sequence > render entire work area. The settings I chose were h264, 1080p, 29.97.
Then, I go to export > media > and verify all data is still correct. Then I move it to queue, Media encoder comes up and I start Queue after puting the file in the desired location.
I then go to the file, it is only 16 seconds long (video is about 50 mins, and looks like complete garbage. HALP!
Video is from a Gopro Hero 1, and I noticed for the source video it says resolution was 720x480, could that be part of the problem.
Any help would be appreciated.
Further back story, most of the editing was done in CS5, but my media encoder wasn't working so I upgraded to CS6 everything.
Any help would be greatly appreciated.

Please try this - do not pre-render the timeline, leave it red. Verify what the current sequence settings are, for instance 720x480 29.97. Go to File > Export > Media to bring up AME. Whatever format you choose, make sure the dimensions match the source. It will display input and output settings, easy to look if there are differences.
At bottom left, choose 'Entire Sequence" rather than "Work Area". Rather than Queue, just hit EXPORT. This ought to work.
I would suggest a test - create a NEW project. Import a sample clip. Drag to "New Item" button at lower right on bin, to create a new timeline sequence that matches the clip. Verify what the sequence settings are. Add a title. Export as described above. Check results.
Jeff

Final cut x - export and youtube

hi all. I am just trying to work out what has gone wrong here.
Using final cut X exporting using compressor.
here is my youtube chanel for info as well.
http://www.youtube.com/channel/UCy-etfi_vg_Cwkjz3zOAtPg
I just uploaded a video i created yesterday. I shot it in 1920X1080 @ 50 FPS, edited it in fincal cut, and exported it in compressor with the default settings for
HD 720. here is a copy of the information in the file.
Name: HD 720p
Description: HD 720p for upload to web sharing sites such as YouTube and Vimeo
File Extension: mov
Estimated size: 4.61 GB/hour of source
Audio Encoder
          AAC, Stereo (L R), 48.000 kHz
Video Encoder
          Width and Height: Up to 1280 x 720
          Pixel aspect ratio: Default
          Crop: None
          Padding: None
          Frame rate: (100% of source)
          Frame Controls: Automatically selected: Off
          Codec Type: H.264
          Multi-pass: On, frame reorder: On
          Pixel depth: 24
          Spatial quality: 75
          Min. Spatial quality: 25
          Temporal quality: 50
          Min. temporal quality: 25
          Average data rate: 10.24 (Mbps)
Compatible with Mac
My question is that the output video is the quality I wanted, and have uploaded to youtube before, as you can see some of the other videos there, but when I uploaded this video (thank you video) the quality is jumpy and nasty and I am not really sure what happened.
I am also using the panasonic HC-V520m full HD camera.
any info would be great.

Hello Serenity99. In my rather limited experience with this, I have had much success with just copying and pasting the project from within FCP X. All of the properties (retiming, themes, effects, music, sound effects etc.) copy over exactly between the two, which is great. The only thing is that while the transitions and retiming copy over in the one go, you may have to go back and copy and paste any titles seperately as they are placed above the clips (well in my case they have been) but they will copy over nicely and as previously configured. I have not found this to be a big hassle at all. I was releaved to find that the process was as easy as it was. Mind you, I have not has as hiccup free a time with copy and pasting from other applications like iMovie to FCP X. Although I can select and copy the projects, all the other editing and rejiging has been jumbled and required much reworking. But if you stick to within FCP X it is easy as pie and works wonderfully.

Safari and youtube problems

Ok...so i've had this problem before and i ended up uninstalling safari which turned out to be a bigger mistake until someone helped me to find the right download to restore it...but anyway since restoring the problem i'm about to describe hadn't come up until the last few days...so i'll describe it again here....
The problem seems to be directly related to youtube...but only with safari, as i've started using firefox (my back up browser) again when the problem comes up and i simply don't have the problem then....only with safari...so hopefully someone can help me troubleshoot and resolve the issue.
The problem starts with a general freezing of safari, but only when i'm watching a youtube video...and directly on youtube....in other words, embeded youtube videos at other sites don't seem to be an issue, but sometimes, not always and not on every video if i pull it up on youtube.com, the video screen remains a stagnant black...not thinking wheel or sound or static or anything, just a dead black window with no volume or any other controls.
So when i go to my subscriptions for excample, there are certain videos that that happens when i go to the vid page....i back out and retry and have tried to reload the page, etc, but to no avail....just a dead black screen. But then i can try the next video and it will work fine.....and the issue seems consistent with the same videos, tho those videos collectively are random...meaning not from the same poster, or not under a certain resolution setting or anything like that...so as an example, if video A and B and C play fine, then i get to video D and it doesn't work.....then A and B and C always work, and D always does not..... that's after shutting down safari and reopening it...after shutting down the computer and restarting it....the issue is persistent on whichever vids had th problem to begin with...so then i thought let's test with another browser and see what happens....it almost seems like those video's flash is not working...but only those specific videos and only on Safari...
So then i pull up firefox and they all play fine, noooo problem...period....no problem on firefox....so i've determined it somethin to do with Safari...but the what and the how to fix are my problem....has anyone else experienced this and maybe know how i can at least find an error log or something that i can post here it will help someone to help me fix it?
running safari 5.1.7 on os 10.6.8
Any help thqt isn't telling me to retry the things i've already tried here is greatly welcome and will get the Helpful button and hopefully teh problem solved button. Thanks!

sorry, did a search and nothting came up for some reason, but as i posted i see posts on the right that sound like my problems so i'm tryin them as i see them and updating my question accordingly.....said to turn off extensions...and that was my first solution the last time this happened, and they have never since been turned on....so they are already off....so that's not helping either...

Interlace Deinterlace Export and Youtube Problem

Similar Messages

Maybe you are looking for