Interlaced render/export of Progressive event

Footage shot in SD 30fps Progressive loaded into timeline.
If rendered Progressive and exported, edges look jagged, lines striated.
If rendered Interlaced and exported, looks good (both on computer screen via Quicktime, and on LED via BrightSign).
What sense might this make, considering it was shot Progressive?
Thanks.

FAQ: What information should I provide when asking a question on this forum?

Similar Messages

  • AVCHD interlaced sequence export to progressive (h.264) with Premiere Pro CS5.

    Hi !
    I have searched everywhere on the web (and this forum) for an appropriate answer.
    Here is the problem :
    I have used AVCHD (upperfields first / square pixels / 1080i30(i60)) footages to make a movie.
    The primary sequence settings are correct :
    AVCHD 1080i30(i60) square pixels
    The files play fine in Premiere, and the montage was flawless in high 1080i quality.
    I have exported 5 seconds of the movie into raw "AVI Microsoft uncompressed" files, so I can import them in "After Effects" to had some texts and graphics. When done, I re-imported them into the Premiere's sequence. (same AVI uncompressed format).
    Playback works fine. The movie looks great and flawless, and has no interlacing artifact.
    HOWEVER : When I want to export this sequence into a MPEG H.264 progressive final file, there is some gerkiness on the parts where the "AVI" files were added.
    It looks as if it had been interlaced, when the rest of the movie looks ok.
    When I'm in the exporting window, I can see the "Source" and "Output" display.
    "Source" looks fine and "Output" looks gerky.
    I have tried to create a new progressive sequence, into which I imported my main AVCHD sequence (with some progressive footages in it). To no avail !... I had heard that this could work but it's not.
    I looked in the "Output" window while trying all the possible codec formats (and field orders), to no avail.
    UNTIL !! I checked the key : "Make Sequence settings match" that is on top of the exporting window.
    The image in the "Output" window became clear. However, all the settings below the checked key were now locked.
    Producing a file with this format (it seems it is a MPEG2 / upperfield first, the same format that is used for Preview files) can render a file that has all it's field and image quality aligned.
    By unchecking the "Make sequence match" key, I was able to create my own settings of MPEG2 "upperfield" that still interpretes the movie correctly.
    But it's not the MPEG H.264 progressive file that I want. I have to re-render it with a third party software to get a H.264(p) out of a MPEG2(i).
    Is there something I should check or try to be able to export my movie in H.264 directly ?
    Thank you!

    FAQ: What information should I provide when asking a question on this forum?

  • Popup message 'Export In Progress' during export creation.

    Hello,
    Having problems closing a popup window which displays "Export in Progress" after my code creates the file and before I set response.setContentType and the Content-Disposition header (trying to close after is pointless). The problem is I can't close the popup. DId anyone find a solution to this problem?
    Sequence of events:
    Popup opens with Export options.
    User selects "Excel"
    The popup displays "Export in Progess"
    The "File Download" dialog opens and the user selects Open/Save/Cancel
    Problem --> The popup is still open.
    One idea is to redirect from ExcelCreator servlet to popup, close popup and then go back to ExcelCreator.
    If anyone has a link to an example or an idea the Please let me know.
    Thanks,
    Billy

    Check out this component from Coldtags suite:
    http://www.servletsuite.com/servlets/waittag.htm

  • PE 4 crashes on render, export and preview with Vista 64 bit

    I just installed my PE 4 on a new Windows Vista 64 bit machine with the i7 920 processor and 512 MB ATI Radeon video card.  PE 4 worked fine on my XP machine but I cannot get it to render, export or even let me preview on this new maching.  I have followed the advise of updating all drivers and software and uninstall and reinstalling with nothing running and I get the same error repeatedly - it will render and progress for about 5 seconds and then I get "Adobe Premiere Elements.exe has stopped working" and it closes.  The video clips are from a flash memory camera and the Presets set for widescreen - flash memory.  Everything works normally until I try to view or render the files.  Any suggestions?

    You say this is from a flash memory camcorder? Can  you be more specific?
    Webbie camcorders, like the Flip, may shoot in hi-def, but they also record to a non-standard codec that can cause some of the problems you're describing.

  • I have an external hard drive which has my i-photo on it & some movies from i-movie that I have on disk now. But for some reason my ehd has a caution symbol on it & I can't move my event to free up space on my hd so that I can export i-movie events. Help!

    I have an external hard drive which has my i-photo on it & some movies from i-movie that I have on disk now. But for some reason my ehd has a caution symbol on it & I can't move my event to free up space on my hd so that I can export i-movie events. Help!

    Usually the caution symbol means that it's formatted as a PC compatible format like NTFS or most likely FAT32. For iMovie to use it the ehd must be formatted Mac OS Extended. Then iMovie will show it without the caution symbol and you can drag/drop open any Event/Project from that hard drive.
    To find out if it's formatted as PC:
    Go to the desktop, holding down the Control key click on that ehd and in the pop-menu choose 'Get Info'
    Under Format: It will say whether or not it's Mac OS Extended (Journaled). The only way to undo a PC formatted ehd would be to copy everything off of it first, Erase/Format the drive using Disk Utility in the Applications>Utilities folder on your Mac, choosing the Mac OS Extended (Journaled) format in the pull-down menu there.

  • I can export many iphoto events to a Data stick. I want to do the same with a DVD. When I do the DVD window is blank. If I drag and drop can only do one. Help

    I can "export", using file, many iphoto events to a data disk. When I do the same to a DVD the DVD window is blank and nothing has been exported. When I use drag and drop to a DVD it works but I can only get one event on the disk. How do I export many iphoto events to a DVD. I am using a write only DVD. I am using a Mac Book Pro OS 10. Thanks in advance.
    Gord

    When I click on the data stick icon on my desk top a window comes up. It lists the various events that I have exported. If i click on an event each picture shows up in a list. I can click on the picture and view a jpeg photo or view a avi video. When I export I select "original" as the file type. When I export to a DVD and klick on the the DVD icon the window shows up but it is blank.  

  • Option in properties panel: render - export a bitmap

    Hi - just come across this.
    Therefore should we always use render - export as bitmap - it will be kinder on all CPUs of all platforms.???
    When would I not use it then?
    I suppose I can - but can I code this in ie: character.exportAsBitmap at design time or is it ONLY for mcs on stage. ie: Can I import mcs an apply that???
    Cheers

    I understand that you need the newest version (InDesign CC 2014.1) to accomplish what you want with EPUB.
    But if you have a Creative Cloud subscription, you can download BOTH that version (the current one) AND also install InDesign CC (which came out in 2013), as well as InDesign CS6. All can be installed simultaneously!
    As I described above, I think you unintentionally muffed it by installing a trial on top of your installation. Both should be uninstalled.
    Then with Creative Cloud install the latest version and make sure it's working.
    To download an older version from Creative Cloud, select the Apps menu in the CC application. Scroll down till you see "Filters & Version" In that section, you will see the older versions which you can also install.

  • Premiere/Media Encoder can't render/export after 10.9.3 update.  Any Answers?

    My computer ran the OSX 10.9.3 update a couple nights ago, and suddenly Premiere/Media Encoder can not export.  It just freezes up the computer until I cold crash it.  Same if I try to render a timeline in Premiere.  This issue just started yesterday.  It still persists after wiping my hard drive and doing a clean install of everything, which of course just put 10.9.3 back on there.  This issue does not exist on my laptop that has not been updated yet.  However, I have enough work and not enough time to be trying to edit everything on my laptop while this get worked out.  Has anyone else got this issue in the past day or two?

    Hey Todd,
    I had two active projects that suddenly could not render/export.  One is quite massive and has RG Colorista quite a bit throughout it, however I could not export a timeline without any plugins on it.  The other project is also clean of plugins.  Then I started a new project and it went out just fine until I put the RG plugin on it.  But here is my newest glitch.  I just made a change to an old show and all of my titles done in Title Tool were resized and positioned.  Blown up and shifted to the right.  If I take the same file and put it on my laptop which still has not got 10.9.3, they are just fine.  Scaled properly and centered between title safe.  But now on 10.9.3 they are blown up and going off the screen.

  • How do I render/export Videos to mp4 format ?

    How do I render/export videos in the mp4 format ?

    You need to ask in the program forum
    http://forums.adobe.com/community/premiere_elements/content
    or
    http://forums.adobe.com/community/premiere/content
    The Cloud forum is not about using individual programs
    The Cloud forum is about the Cloud as a delivery & install process
    If you will start at the Forums Index https://forums.adobe.com/welcome
    You will be able to select a forum for the specific Adobe product(s) you use
    Click the "down arrow" symbol on the right (where it says All communities) to open the drop down list and scroll

  • I'm looking for someone to render (export) a final cut X project for me.

    I'm looking for someone to render (export) a final cut X project for me. I am running FCX on my MB air & it works surprisingly well for small projects. However, I have a 4 minute video that is outside of the limits of my machine. I am assuming there is a way to dropfile the project & have someone else export it for me & dropfile it back to me as a HD video I can post on Vimeo. I am willing to pay for this service.

    I may not be doing this correctly, I created the new library & when I tried to copy the the clips it said this:
    You are editing compound clips or multicam clips between libraries.
    Final Cut Pro will copy files and create new parent clips in the library "Movies".
    The new clips will be independent of the original parent clips.
    Media stored in external folders will be linked to but not copied.

  • How to use the PROGRESS Event?

    Can someone explain to me how to use the PROGRESS event, i looked at the docs but it never helped me?
    I want to use it to display the prgress of downloading data from a API, its a URL event. But i was told i can do this via a PROGREE Event

    copy and paste the trace output from:
    import flash.events.ProgressEvent;
    //var facebookAPI:String = "https://graph.facebook.com/ginorea1/feed?access_token=277830088900615|2.AQDUBMBocIw_QcqE.3600.1313856000.0-100001000396080|5bXT8Cj0OUxNpr7y NeqTsJfwADg";//
    var facebookAPI:String = "https://graph.facebook.com/100001000396080/statuses?access_token=14563 4995501895|2.AQAKdU4pcsdMmmBO.3600.1313859600.0-100001000396080|7uzAMoRdsg5kXLjc exS5bVaPhag";
    var loader:URLLoader = new URLLoader(new URLRequest(facebookAPI));
    loader.addEventListener(Event.COMPLETE, loadComplete);
    loader.addEventListener(ProgresEvent.PROGRESS,loadProgress);
    function loadProgress(e:ProgressEvent):void
    trace(e.bytesLoaded,e.bytesTotal);
    progress_txt.text = String(Math.floor((e.bytesLoaded/e.bytesTotal)*100));
    function loadComplete(e:Event):void{
    processData(e.target.data);
    function processData(data:String):void
    var facebookFeed:Array = JSON.decode(data).data as Array;
    for (var i:uint, feedCount:uint = 10; i < feedCount; i++)
    var tf2:TextField=new TextField();
    feed1.text = facebookFeed[i].message;
    feed2.text = facebookFeed[2].message;
    feed3.text = facebookFeed[3].message;
    feed4.text = facebookFeed[4].message;
    feed5.text = facebookFeed[5].message;
    feed6.text = facebookFeed[6].message;
    feed7.text = facebookFeed[7].message;
    feed8.text = facebookFeed[8].message;
    feed9.text = facebookFeed[9].message;
    feed10.text = facebookFeed[10].message;
    stop();

  • Exported/emailed iCal event failed to install

    I recently experimented with exporting an iCal event and then attaching its file to an email. I mailed a copy to myself to see how it would look on and work with a recipient's machine.
    When I received the email, I double-clicked on the attached iCal file icon. Instead of simply importing into my calendar, the application went "wild", spewing out a lengthy series of error messages that made no sense to me, except to consistently refer to my various calendars that I maintain as iCloud accounts. The material result of dismissing these error messages was to add duplicate events ad nausem to my iCal calendar, wreaking havoc.
    This serial process continued until I closed iCal, went to iCloud on my System Preferences and removed all of my iCloud calendar accounts.Then, I turned iCloud back on and all of the current calendars reinstalled themselves without the errant duplicates and without further mischief.
    Can anyone tell me what is going on.
    I am running Lion OSX 10.7.5 on my iMac.

    Hi Russell,
    What’s the situation now?
    There would be a cause that the upgrade is running background, so a retry would fail in this situation.
    You can check the action log  in C:\$Windows.~BT\source\panther\setupact.log
    Check the time line to see if it is running for upgrade.
    Alex Zhao
    TechNet Community Support

  • Easiest way to use multiple computers for render/export?

    So, for tools like Vegas, Premiere etc you can have a render far, that would help you render/export clips potentially cutting down render time from 40+ hours to mere hour or two.
    I have a couple of macs available on the network that i would like to try do the same with, at least cut it down in half or 1/3 of what it is taking now.
    What is the best/easiest way to go about doing this?
    Thanks

    Hi(Bonjour)!
    You can do that with Final Cut Studio with Compressor and by build a quick clusters render farm. Ask on Compressor forum.
    Michel Boissonneault

  • I can't render/export.

    Have been constantly trying to render/export my video since this morning. Couldn't do so after editing brightness and contrast.

    If Tento's advice does not work, work your way through this doc.
    "Error compiling movie" when rendering or exporting with Premiere Pro CS3, CS4, CS5, CS5.5, CS6

  • Progress Event in class

    Hi, I'm trying to get a grip on writing classes. I have a
    simple preloader class which sort of works. When I trace
    _percentLoaded from within the class the percentages are output
    when I add the class to an fla. But, if I trace _percentLoaded from
    the fla I get NaN. Is there a way to pass the progress event data
    into the fla? Thanks

    right, it's a little tricky. Offhand, you could choose from:
    - place the event handler function on the main timeline (it
    doesn't have to be in the same class)
    - from within your class, create a dynamic handler function
    on the timeline (which might be a pain)
    - callback to the timeline with the data
    - from within the present handler, broadcast a custom event
    that gets handled in the main timeline
    the communication might require instantiating like so:
    new SimpleLoader(this)
    from the main timeline so that your instance could then refer
    back to the main timeline
    which is the reverse of what you'd normally think of:
    var loader:SimpleLoader = new SimpleLoader()
    so that the loader can be accessed from the main timeline via
    the var "loader".

Maybe you are looking for