Interlacing Issues after Exporting - Help!

Hello -
So I'm having some very frustrating issues exporting a project from Premiere CS3. I'm trying to output to a lightweight quicktime format - either mp4 or an h264 .mov file. I've shot footage using a canon legria hf s10 camcorder, importing at 1920 x 1080 at 25 fps. I used apple's new iMovie to import the clips to my computer (because premiere doesn't seem to natively support AVCHD, which I think the camera shoots in). So I capture the footage with iMovie, then import those .mov files using premiere.
All this is fine, until there's a lot of horizontal motion in shots, where I get these ugly interlaced lines that really mar the quality of my footage. I'm trying to produce some videos in a professional setting, and these lines really hurt the overall perceived quality of my work. However, I thought I had found a fix when I selected the problematic clips and right-clicked, selected "field options," and clicked "always deinterlace." After doing so, the ugly lines disappeared, and when I play the clips back in premiere, I have no issues whatsoever. However, when I EXPORT the clips, the ugly interlacing somehow RETURNS... which is exceedingly frustrating, because I can't figure out how to get rid of them.
When I export, as said before, I am trying to create a relatively low-quality, 854 x 480, square pixel quicktime file of some sort. I've tried any number of exporting options to no avail.
Therefore, I am at your mercy. Endless gratitude to anyone who can help solve this plight. Here's a still example of the problem for your consideration:
http://drop.io/76jjrs8#
Thanks so much,
Jim

Hi, Ann,
You should try Dans Isaac HD to SD Workflow. There is plenty of answers for your question.
Art

Similar Messages

Audio issues after exporting

I've made a 40 minute video of my friends' wedding, which plays beautifully in iMovie, but when I export it, there are some audio issues. I've read other forums and detached all audio before exporting and still the same result.
1) Part of the opening sequence has a piece of audio (from another part of the video) that runs with some slow motion clips of bride and groom. When I export, the warped, slowed down original audio can be heard in the background. I've tried everything - detach audio and delete the offending piece of original audio to reducing the volume level of the original audio to 0. It's still there after exporting!!!
2) Maybe as a result of the above, not sure, but once exported, the whole video audio is out of sync by a few seconds. Went back and checked the project and it's all good with all the audio lining up with the clips, but export and it's out of whack
My friends are hounding me to see the video and I keep stalling, quoting some 'technical issues'.
Please help!

Just wanted to let you all know you've saved my sanity by posting on this board. Your solution - while not what I would have guessed in a million years was the problem source - fixed my video. I can't believe it was so simple! Now, if I could only get the hour(s) back where I tried to find the audio track I 'hadn't muted'...

Audio issues after export to QT (Christmas present - please help!)

I've made a nice presentation in Keynote 4.0.1. My plan was to export it to QT, then
make a DVD of the result. It's supposed to be a chrismas gift to my parents (a presentation
about their newborn grandchild) but now I'm stuck with no working audio.
The presentation includes a few video clips and mp3-audio. They work perfectly when I
preview the presentation in Keynote, but when I try to export them the sound from the
videoclips is gone, and the audio from all the mp3:s stops after about a second.
I have tried to work around this by converting the presentation to Flash, it helps the audio,
but then all the transitions, slides and pictures are messed up.
I've been working with this all night, looked on all forums, without success.
Please, pretty please, all you Santas out there - HELP ME BEFORE CHRISTMAS!!!
Thanks,
Henrik

Ok. Now I've tried a lot more ways to make this work. I'm getting more and more desperate!
One way was to plug in a headphone cable in the line-in and plug-it in "headphones", and record the audio from the slide as "recorded narrations" in Keynote. This worked on one slide - with lots of audio latency, but when I tried it on the whole slideshow Keynote freaked out and crashed.
I hate this excellent program. I wonder - how can Apple release, and expect people to pay for something so buggy and obviously unfinished as iWork '08.
I've worked with MS Office and Open Office, but never, ever had so much trouble with sudden crashes, missing audio, latency and non-working videoclips! If I had a company I would never risk
to use this software for important speaches and annual reports.
//Henrik
P.S Sorry for my English, I'm to upset to think about grammar and spelling. D.S

Layout Issue after exporting crystal report XI in pdf format

Hi All,
I have developed a crystal report in XI version. I have set my page layout properties in the report to be in landscape orientation and A2 size sheet with No Printer(optimize for screen display) option unchecked. The problem is when I export the report in pdf and open the report in pdf for printing, it takes the printer preference settings that are set to portrait and letter format. If I change my printer prefence settings to landscape, it works fine. But, I do not want to change my printer preference settings and want that the settings that I am giving in crystal report designer must be taken for printing purposes in pdf.
I hope, I was able to put forward the question correctly without any confusion.
Can someone please help me out to find a solution ?
Thanks in advance.

Hi Akshay
Always quote the actual version of Crystal Reports you are working with. E.g.; CR IX is not quite enough and the best place to find the actual version is in the Help | About screen of the CR designer.
By CR XI, you could mean CR 11.0.x, or CR 11.5.x. If you are using CR 11.0.x, update to CR 11.5 (also referred to as CR XI R2). See this blog on how to.
- Ludek
Senior Support Engineer AGS Product Support, Global Support Center Canada
Follow us on Twitter

Excel output display issue after exporting the report

Hi All.
We are using BI Publisher with Oracle retail for report generation.While exporting report in excel format , after saving the file we are not able to see the data.
When we do a Format-->Autoformat and select one of the options, we can see the data .
What could be the possible reason for this?Can i do anything to avoid this.
Is there a possibility of checking excel log to see how the Excel treating the incoming data.If yes, how can we check the excel log(failed to find anything on this).
Thanks!!

Hmm.. Not really sure. Have you checked your Financial Reporting preferences on Workspace? Couple of things to look for:
- Export to Office Application options
- User Point of View options
I would just check the preferences and test various options.
Cheers,
Mehmet

Field order issues after export to DV Pal from uncompressed

We are experiencing some difficulty exporting clips from FCP to our Omneon Server for TX.
We are capturing 8 bit uncompressed (AJA and Blackmagic) from digibeta for our edit and all editing stays in uncompressed until final output. Our transmission system demands DV PAL files so we export finished items as DV PAL in FCP and drop onto the server
Our problem is that on playback from the server, the field order is incorrect. Although the exported DV clips properties show lower field order, the clip is obviously playing upper field first. If we capture and edit in DV and export the DV file to the server, then we have no problems. I have tried
exporting uncompressed clips to DV via Compressor and changing the field order in frame controls but no success. It seems that when a clip is captured and edited in upper field it hangs onto that status even after conversion to DV!! Any thoughts greatly appreciated!

when you drop one of your 8 bit uncompressed source clips into your DV PAL timeline, is FCP correctly adding the Shift Fields filer to those timeline instances?
do you edit in 8-bit uncompressed and then export direct to DV PAL or do you nest your 8 bit uncompressed sequence into a DV PAL sequence first and then export as Quicktime Movie w/ current settings? if not the latter, try it (and make sure your nest has the Shift Fields filter applied)

Formating issue after export crystal report to excel format

Hi Everyone,
I have a crystal report devloped in crystal 8.5 and i am calling this report from my .net windows application. I have a problem when i export the report in excel format. One of the column size(which is report footer) gets increased because of which my report is not properly formated. I have reoved all the blank lines and extra space but still i am not able to reduce the column size. Any help will be appriciated.
Thanks in advance.

Hi,
Please let us know the Visual Studio Version that you are using, just to inform you, VS2005 is compatible with CRXIR2 and above and VS2008 is compatible with CR2008 + SP0.
Do the report display properly from the designer? Does the Export from the designer in xls works fine?
Thanks,
AG.

Audio/Video sync issues after exporting

Two quick issues:
1. I've recently exported a project from FCE4 to quicktime and am finding that the audio is slightly out of sync with the video everytime.
Is there an ideal format or setting I need to export at to avoid this?
2. Also, I've edited two projects using the same clips and keep finding that the second one I make seems to make the video very narrow when I export it. Is there a setting I need to use to avoid this, or does the problem lay in the setup?
Cheers!
John

From what I see in your info, the clips don't match the Sequeunce.
Furthermore, the clips are not FCE freindly. Probably required rendering?
I'd suggest using Streamclip to convert the H.264 clips to the exact specs of one of the FCE>Easy Setups, audio and video properties, then start over.
http://www.squared5.com/
BTW: Whatever you convert the clips to must match the Easy Setup, so that you work with Clips and Sequence being the same. The best way to acheive this is to start a NEW Project, set the Easy Setup first, then bring in the the matching clips.
Using Item Properties in Browser>Seqeunce/Clip is one way to confirm matching specs for both.
Al

Printing issues after export

The newsletter we publish, would not print the third page in the PDF version we published. I exported as an interactive PDF, and once I exported as a PDF for print it resolved the issue. My problem is that I'm not sure why it would print the first two pages and not the last (if it was an export problem), and also since we do utilize many interactive features these get lost if exported for print. The users mostly access our newsletter via email and web, however many print to use as references. So I need to find a happy medium to satisfy both uses. Any advice?

katiefinn,
It appears that in the past few days you have not received a response to your
posting. That concerns us, and has triggered this automated reply.
Has your problem been resolved? If not, you might try one of the following options:
- Visit http://support.novell.com and search the knowledgebase and/or check all
the other self support options and support programs available.
- You could also try posting your message again. Make sure it is posted in the
correct newsgroup. (http://forums.novell.com)
Be sure to read the forum FAQ about what to expect in the way of responses:
http://forums.novell.com/faq.php
If this is a reply to a duplicate posting, please ignore and accept our apologies
and rest assured we will issue a stern reprimand to our posting bot.
Good luck!
Your Novell Product Support Forums Team
http://forums.novell.com/

Help with exporting. Video looks horrible after export, but great when in premiere pro

Hey guys, looking for some advice on exporting.
When I finish a video, the color and everything looks great while in premiere pro, but after exporting it, the color ends up looking dull and the whole video looks blurry. I'm filming with a canon vixia hf200 at 60i. It imports as a AVCHD file, I deinterlace it, and then export at the Vimeo HD settings. What can be causing the video to look horrible after exporting? What settings should I be exporting under? Any help would be appreciated!

It looks like you're coming up against some of the colorspace handling issues that the Premiere pipeline has.
Since your source is 60i AVCHD it's HD and thus rec709 colorspace. If it gets encoded with the standard rec601 colorspace (SD sizes are this) then all the colors get crushed. Look for a "709" and "601" radio button in your export settings. If it's not there you're out of luck.
The "blurry" is probably a poor quality de-interlacer. If Vimeo permits interlaced vs progressive do that instead. it's always cleaner to stay in the same video format all the way through.
TECHNICAL ASIDE:
rec709 is a triangle of possible colors that can be expressed by mixing of ratios of 3 emitters (the R G B corners of the triangle). (they are the RGB phosphors of a CRT and now LCD pixel elements)
rec709 is a bigger triangle than rec601 so it's capable of more colors. but if you accidently map that triangle's corners to the coordinates of rec601 it gets crushed.
In photography the "sRGB" uses the rec709 triangle. A bigger triangle that that is "Adobe RGB". So if you work in Adobe RGB and export to sRGB without conversion the colors get crushed because sRGB in inside the triangle of "Adobe RGB".
http://en.wikipedia.org/wiki/Srgb
http://en.wikipedia.org/wiki/Rec._709
http://upload.wikimedia.org/wikipedia/commons/8/8f/CIExy1931_sRGB.svg

Hello, I have been exporting my photos with a watermark. Without changing any settings, half way through my day things changed, and now about 1 out of 7 photos have the watermark after export. Change you helpe me change this back please?

Hello, I have been exporting my photos with a watermark. Without changing any settings, half way through my day things changed, and now about 1 out of 7 photos have the watermark after export. Change you help me change this back please? Has anyone had this issue before?

I'm sorry to learn that you have endured the audio issues outlined in your post for almost 2 years SusanLM1! This is certainly not normal! Let's get to the bottom of this issue, first please confirm your phone model; your mention that you have the iPhone 5 but your post is on the iPhone 5S forum. Also, share the iOS version currently installed on your phone. What is your ZIP code? Does this happen mainly while you make/receive calls from a particular location (home, office, etc)?
AntonioC_VZW Follow us on Twitter at www.twitter.com/VZWSupport

Interlacing issues PLEASE HELP

I've cut together a sequence using material I've ripped from a multitude of store-bought DVDs (the project is strictly for personal use only and will not be distributed).
Though the sequence played down fine throughout the entire editing process on my computer, when I created a DVD (using DVDSP 4) and watched it on a set-top player, certain clips would stutter and sort of tremble, particularly where lateral movement was involved. I am confident that this is due to the fact that my source footage must have varying field dominance.
Is there any way to correct this other than using a de-interlace filter which will further degrade the image quality?
The details of my process are as follows:
I ripped my source media using a shareware program called MacTheRipper, which allowed me to demux the DVD streams and get the individual AC3 and M2V files.
Then I used Compressor (2.0.1) to transcode the M2V files to DV NTSC and imported them into FCP-3.
Once editing was complete, I exported the sequence as a self-contained movie file using current settings (FCP-3 does not permit exporting directly to compressor).
THE SELF-CONTAINED MOVIE FILE PLAYS DOWN FINE. Once I use Compressor to create an M2V file, however, the interlacing issues become apparent.
Thanks in advance for your help.

Was all of the footage in your sequence shot with the same camera? With the same settings?
In my project, the problem is occurring because the various clips in my sequence were created with different specs. This is why I am seeing it sporadically throughout. Or so I think.
The De-interlace option is simply a video filter that gives you solid, non-interlaced frames by erasing one field from each frame and interpolating what the now missing information should be. As I understand it, this is used primarily for material that is to be exhibited on the computer. Interlaced media looks pretty bad on a computer monitor, but it's appropriate for a television screen. If you're going to DVD, it's not a good idea to use it.

Interlace issues PLEASE HELP

I've cut together a sequence using material I've ripped from a multitude of store-bought DVDs (the project is strictly for personal use only and will not be distributed).
Though the sequence played down fine throughout the entire editing process on my computer, when I created a DVD (using DVDSP 4) and watched it on a set-top player, certain clips would stutter and sort of tremble, particularly where lateral movement was involved. I am confident that this is due to the fact that my source footage must have varying field dominance.
Is there any way to correct this other than using a de-interlace filter which will further degrade the image quality?
The details of my process are as follows:
I ripped my source media using a shareware program called MacTheRipper, which allowed me to demux the DVD streams and get the individual AC3 and M2V files.
Then I used Compressor (2.0.1) to transcode the M2V files to DV NTSC and imported them into FCP-3.
Once editing was complete, I exported the sequence as a self-contained movie file using current settings (FCP-3 does not permit exporting directly to compressor).
THE SELF-CONTAINED MOVIE FILE PLAYS DOWN FINE. Once I use Compressor to create an M2V file, however, the interlacing issues become apparent.
Thanks in advance for your help.

I think David means put the actual bought DVD in. Talk about it. Put the next DVD in, talk about it. Put the next DVD in, talk about it. This is how I was shown various things. I remember seeing several showreels, animation shorts and so on in a class all on different tapes & DVDs...
Some players (Sony) can be set to auto resume so you could even queue things to some extent!
-Jake

Hyperion IR 9.3.1 - Issue in printing the report after exporting it to pdf

Hi All,
I am facing a problem in printing the report after exporting it to pdf format using Hyperion Interactive Reporting 9.3.1. I have set page size of report section to 11X17 inch landscape. Now I am exporting this report section to pdf. Report gets exported to pdf with size 11X17 inch landsacpe. But when I am trying to print this pdf it is shrinking the documnet size to A4 size paper and printing it rather it should print it on 11X17 inch paper size. Please suggest if there is fix available for this issue.
Thanks
Ujjawal

"File > Print Setup > Paper > Size" on PDF.
I think this issue is only to do with the printer and not IR.
I think the question now is "Can your printer print 11X17 pages or not".

I am facing wifi and mobile 2G signal issue after upgrading to IOS 6 from IOS 5 in IPhone 3GS. Please help, restoring setting even didn't helped.

I am facing wifi and mobile 2G signal issue after upgrading to IOS 6 from IOS 5 in IPhone 3GS. The mobile carrier signal as well as WIFI suddenly drops zero and are then restored automatically. Sometimes i cannot conenct to WIFI even standing infront of WIFI router. Please help, restoring setting even didn't helped.

Update: my phone's connecting to the WiFi again. I don't know what did the trick. I did nothing since reinstalling the software. It hadn't worked then, it is now. I tried connecting to my dad's phone's hotspot( he uses a Moto G), and it worked. I then tried connecting to the WiFi at a friend's house, and when I came back home, my phone was able to connect to my WiFi! Is it of any significance that my friend's router doesn't require a password? My issue has been resolved( for now; I hope I'm not counting my chickens before they've hatched). For anyone facing a similar issue, I suggest you try everything I did:
1. Turn your router off for a minimum of 30 seconds, turn it back on and try connecting.
2. Click on the WiFi network you are connected to, scroll to the bottom, tap "Renew Lease".
3. Do a soft and hard reset.
4. Reset network settings.
5. Back your data up, erase all content from settings menu, restore from backup.
6. Reinstall your software( put it in recovery mode).
I am not sure which of the above worked for me. Make sure you try everything. If none of the above works, take it to a genius bar or an authorised service provider. Good luck! :)

Interlacing Issues after Exporting - Help!

Similar Messages

Maybe you are looking for