Interleaving to Fast Path Question

Hi,
After recently getting my broadband line issues sorted, I am still experiencing consistant Lag issues while online Gaming on Xbox live.
After reading up at great length on the internet about other peoples issues, it seems that Interleaving is a main factor in playing Call of Duty Games especially. My question is though would I be able to switch to fast path?
My router/modem stats are:
ADSL Line Status
Connection information
Line state:
Connected
Connection time:
3 days, 05:08:45
Downstream:
2,816 Kbps
Upstream:
448 Kbps
ADSL settings
VPI/VCI:
0/38
Type:
PPPoA
Modulation:
G.992.1 Annex A
Latency type:
Interleaved
Noise margin (Down/Up):
5.6 dB / 15.0 dB
Line attenuation (Down/Up):
56.0 dB / 31.5 dB
Output power (Down/Up):
18.7 dBm / 11.9 dBm
FEC Events (Down/Up):
1313806 / 182
CRC Events (Down/Up):
2872 / 100
Loss of Framing (Local/Remote):
0 / 0
Loss of Signal (Local/Remote):
0 / 0
Loss of Power (Local/Remote):
0 / 0
Loss of Link (Remote):
0
HEC Errors (Down/Up):
17536 / 87
Error Seconds (Local/Remote):
0 / 0
Solved!
Go to Solution.

that is showing that interleaving is working personally unless you really must have interleaving turned off i would leave it on as it improves stability going to fast path could make your line unstable if you want to go to fast path you need to contact the forum mods this is a link to them and ask them to turn off interleaving
http://bt.custhelp.com/app/contact_email/c/4951
they normally reply by email or phone directly to you within 3 working days
They are a UK based BT specialist team who have a good record at getting problems solved
If you want to say thanks for a helpful answer,please click on the Ratings star on the left-hand side If the reply answers your question then please mark as ’Mark as Accepted Solution’

Similar Messages

Latency type changed back to Fast path

I recently had my latency type changed back to interleaving however i now get daily disconnections (usualy when recieving a phone call) and my download speed isnt any better, the only difference is an increased latency of around 10-20ms so i would like to have it reverted back to fast path.
Thanks, Rob.

Hi backie,
If you fill out the contact form located in the about me section of my profile again we can look at this for you.
Cheers,
Chris
BT Mod Team
If you like a post, or want to say thanks for a helpful answer, please click on the Ratings star on the left-hand side of the post.
If someone answers your question correctly please let other members know by clicking on ’Mark as Accepted Solution’.

Latency Type Change Request - Interleaved to Fast ...

Hey there I would like to request to have my Latency Type changed to Fast Path for better gaming experience
here is my HH4 stats:
Thanks
Darren
1. Product name:
BT Home Hub
2. Serial number:
+068343+NQ41704711
3. Firmware version:
Software version 4.7.5.1.83.8.173.1.6 (Type A) Last updated Unknown
4. Board version:
BT Hub 5A
5. WAN:
PPP Connected
6. Data sent/received:
1.0 GB / 1.5 GB
7. Broadband username:
[email protected]
8. BT Wi-fi:
No
9. 2.4 GHz Wireless network/SSID:
BTHub5-KP2X
10. 2.4 GHz Wireless connections:
Enabled (802.11 b/g/n (up to 150 Mb/s)) 20 MHz, WPS enabled
11. 2.4 GHz Wireless security:
WPA2
12. 2.4 GHz Wireless channel:
Automatic (Smart Wireless)
13. 2.4 GHz Wireless network/SSID:
14. 2.4 GHz Wireless connections:
Disabled
15. 2.4 GHz Wireless security:
None
16. 2.4 GHz Wireless channel:
Automatic (Smart Wireless)
17. 2.4 GHz Wireless network/SSID:
BTWifi-with-FON
18. 2.4 GHz Wireless connections:
Disabled
19. 2.4 GHz Wireless security:
None
20. 2.4 GHz Wireless channel:
Automatic (Smart Wireless)
21. 2.4 GHz Wireless network/SSID:
Auto-BTWiFi
22. 2.4 GHz Wireless connections:
Disabled
23. 2.4 GHz Wireless security:
None
24. 2.4 GHz Wireless channel:
Automatic (Smart Wireless)
25. 2.4 GHz Wireless network/SSID:
26. 2.4 GHz Wireless connections:
Disabled
27. 2.4 GHz Wireless security:
None
28. 2.4 GHz Wireless channel:
Automatic (Smart Wireless)
29. 5 GHz Wireless network/SSID:
BTHub5-KP2X
30. 5 GHz Wireless connections:
Enabled (802.11 a/n/ac (up to 1300 Mb/s)) 80 MHz, WPS enabled
31. 5 GHz Wireless security:
WPA2
32. 5 GHz Wireless channel:
Automatic (Smart Wireless)
33. 5 GHz Wireless network/SSID:
34. 5 GHz Wireless connections:
Disabled
35. 5 GHz Wireless security:
None
36. 5 GHz Wireless channel:
Automatic (Smart Wireless)
37. 5 GHz Wireless network/SSID:
BTWifi-with-FON
38. 5 GHz Wireless connections:
Disabled
39. 5 GHz Wireless security:
None
40. 5 GHz Wireless channel:
Automatic (Smart Wireless)
41. 5 GHz Wireless network/SSID:
Auto-BTWiFi
42. 5 GHz Wireless connections:
Disabled
43. 5 GHz Wireless security:
None
44. 5 GHz Wireless channel:
Automatic (Smart Wireless)
45. 5 GHz Wireless network/SSID:
46. 5 GHz Wireless connections:
Disabled
47. 5 GHz Wireless security:
None
48. 5 GHz Wireless channel:
Automatic (Smart Wireless)
49. Firewall:
Disabled
50. MAC Address:
40:f2:01:16:3a:d2
51. Software variant:
52. Boot loader:

What device does the Homehub5 plug into on the WAN side?
Some sort of modem?
If you found this post helpful, please click on the star on the left
If not, I'll try again

Interleaving or Fast Latency?

I have bee looking at my ADSL stats quite a lot recently and have published here a very recent one where the DL in over 16Mbps but then realise that my Latency has changed from Interleaving to FAST. Should I read anything into this? Ist this to maintain a more stable connection and will it automatically change back to Interleaving?

HHGTTG asked:
Ist this to maintain a more stable connection and will it automatically change back to Interleaving?
It's actually the oposite ...
An interleaved connection will give better stability but a slight cost, that being the extra overhead consumed and a degree
of latency (sluggishness) depending on the depth of the interleave. There are various levels of interleave depth, according to the amount of error correction that DLM needs to stabilise.
If your line is running fastpath ... in reality it means that it is above average in conditions condusive to transmit the DSL and is ok to go as it is .... any error correction will be done by a trellis modulation system within the code of the DSL standard.
Also ... and this is purely my own opinion. BT Wholesale who own the technical systems and such for their Dynamic Line Management systems which run the BT network, never publicly publish details of technicalities about DLM, for obvious reasons .... however it is my own opinion that more and more lines are now modulating fastpath DSL which leads me to think they have changed the goalposts slightly about interleave, simply because gamers prefer fastpath to allow for better latency free gaming.

Interleaving or Fast connection NOW SOLVED

Hi All,
can someone tell me what the difference is between Interleaving or Fast connection?
I am on Interleaving connection and get full wack 8 Meg connection where as my sis is on about 6 meg and lives round the corner and is on fast connection.
We are both on the ingatestone exchange.
Hope someone can advise
CG
CG Over An Out
Solved!
Go to Solution.

try this link it trys to explain what the difference is between them. But in basic interleaving helps to maintain a stable line when on a ADSL max connection and trys to correct errors. so if you have a unstable line setting in to fast would not be advised.

Want to Change Latency from "Interleaved" To "Fast...

I used to have "Fast" latency which helped smooth play on xbox live, but when i turned my router on and off over a period of a few days (When i was rearranging my room) i noticed that my internet had slowed down, i checked and i had an "Interleaved" latency type! I wish to go back to "Fast" as it helped.
Thanks.

Hi Welcome to the forums
Here is a basic guide to getting help from the community members done by CL Keith Please read through the link posted http://forumhelp.dyndns.info/speed/first_steps.html
once you have posted the information asked for then the community members can help you more
Thank You
This is a customer to customer self help forum the only BT presence here are the forum moderators
If you want to say thanks for a helpful answer,please click on the Ratings star on the left-hand side If the reply answers your question then please mark as ’Mark as Accepted Solution’

File path question....

Yet another really simple question from me, as I've been away from DIAdem for too long.
I have a program which, in part of it, needs the user to select the path that they want a set of a few hundred files to be saved in. I've tried using FileNameGet, but this requires me to select a file in the directory i want to save into to record the path. I just want the user to have to select the folder once.
I've tried this:
'===============
dim newfilepath
If (FileNameGet("ANY",,,,,,"Select the directory to save the new files into:") = "IDOk") Then
newfilepath=FileDlgDir
else
End If
'===============
Can I select a directory instead of a file?
Solved!
Go to Solution.

Hello Tom!
Yes, with the PathNameGet() command.
Matthias
Matthias Alleweldt
Project Engineer / Projektingenieur
Twigeater?

Path question

Hi,
I have two questions about paths
1. After making a stoke on a path, I made some adjustments on the path. But it doesnt affect the sroke. Is thre a way to do this.
2. Is there a way of deforming a layer by a curve.
Thank you.

you can still use Warp, just not the manual warp, select Arc or something like that from the Options bar. If you're pipe is vertical then you could also try your luck with Filter->Distort->Shear but i'd say that this too is more Illustrator territory
edited

Path question in Illustrator CS4

Hi...I am impoorting a bar graph from Microsfot Excel to Illustrator CS4. So far, so good. I can simply cut and paste from the clipboard and Illustrator understands the Excel graph. What I want to do is to convert the graph to grayscle (which I've done), then apply a spot color to just one of the bars in the graph. I'm able to use the direct selection tool to select one of the bars. Each bar appears to be its own path. Then I open up the swatches menu and apply a color. But ALL of the bars in the graph turn that color, as if all of the paths are the same. Is there any way to ungroup a path? I tried the "ungroup" command to no avail. Thanks.

Thanks, Kurt. I figured out how to do it. Actually, I figured out two different ways:
1. Using OBJECT/COMPOUND PATH/RELEASE
and
2. WINDOWS/PATHFINDER/DIVIDE
Both seem to work.

2 fast Ministack questions

For those who have/know...
Is a ministack usable JUST as a hub WITHOUT a HD?
When connected ONLY via Firewire do you get all the speed benefits of USB2.0, even if the original machine in only FW and USB1.1??
(I want to add USB2 to a Pismo and a 1gHz eMac)
Thanks!
W.

There are options that have the ministack look that are only Fire Wire or USB ports and not hard drives. Not to sure what you want or mean after that... if your mac does not have USB2 then adding a port extension with USB2 will force it to work at USB1 speed. From my limited experience with my Mac mini it seems that FW works best, way faster then USB 1 or 2. Hope this helped... good luck...

[CS5-JS] Link path question

Hi,
I made a script that needs the path of every link within the document.
I tested it on a Mac (10.5.8) and when I look at links path (document.link.filePath) I see strings like these:
Username:Desktop:WorkFolder:myFile.jpg
It looks like paths starts from the user folder.
I thought it was due to the fact that this user is not an administrator.
So I tested the same script on another computer (10.6.4) but the path looks correct:
MacintoshHD:Users:Username:Desktop:WorkFolder:myFile.jpg
Obviously I have some problems while passing this value because in the first case it doesn't point to afile object...
Is it a OS issue?
I don't know how to solve it...
Thanks!

Hi
I think you should use ObjectStyle!
create an Object Style and set some transparency settings, and apply this to objects
var my_obj_style;
try {
my_obj_style = myDoc.objectStyles.add({name:"inner glow setting"});
catch(e){
my_obj_style = myDoc.objectStyles.item("inner glow setting");
with (my_obj_style.transparencySettings.innerGlowSettings){
applied = true;
blendMode = 1852797549/*BlendMode.NORMAL*/;
opacity = 100;
noise = 0;
effectColor = "Paper";
technique = 2020618338/*GlowTechnique.PRECISE*/;
spread = 79;
size = '0.125in';
source = 2020618594 /*InnerGlowSource.EDGE_SOURCED*/;
//Create the ovals and specify their size and location...
var myLeftOval = myPage.ovals.add({geometricBounds:[2, -3, 2.75, -.75], fillColor:myDoc.colors.item("25% Black"),strokeColor:myDoc.swatches.item("None"), itemLayer:myDoc.layers.item("New Layer"),appliedObjectStyle:my_obj_style});
var myCenterOval = myPage.ovals.add({geometricBounds:[3, -3, 3.75, -.75], fillColor:myDoc.colors.item("25% Black"),strokeColor:myDoc.swatches.item("None"), itemLayer:myDoc.layers.item("New Layer")});
var myRightOval = myPage.ovals.add({geometricBounds:[4, -3, 4.75, -.75], fillColor:myDoc.colors.item("25% Black"),strokeColor:myDoc.swatches.item("None"), itemLayer:myDoc.layers.item("New Layer"),appliedObjectStyle:my_obj_style});
I didn't apply object style to center oval, on purpose.
Thankyou
mg.

Upgrade path question...

I've been using golive 6 and in about a month I'm planning to upgrade...I'm seeing upgrades to golive 9 (which i read here has its problems), CS2 which I'm assuming I can update golive 6 to, and then the alternative that the Adobe site offers/suggests, switch to Dreamweaver...
I haven't followed all the changes and rumor...maybe you can help me here...is golive a dead end now? Is Adobe going to eventually just abandon it for DW?...
Also, I'll be updating my other adobe software to CS3 for photoshop, illustrator, and indesign...so nice integration between Golive CS2 or DW would be a goal...
Please don't shoot me if this isn't the place to ask, it just seems you guys know everything when I come with a question about me being lost and confused in golive...
oh, I did watch the little video presentation about DW on the Adobe site...i didn't feel totally lost looking at the examples there...I do wonder if DW will just be so new that'll i'll be totally lost for while...I've read of some complaints from golive users in the past...
I mean, can you tell me if DW has any 'major' shortcoming?...I'm not familiar with it...just know about golive 5 and 6 which wasn't too complicated and allowed me to do a website 'almost' pain free...
thanks for any advice/experience/tips you can pass along...I mean I could spend near $200 for the CS2 update or for $400 just buy DW...just don't want to waste money on an update if it doesn't make sense/cents...
thanks...
M

ok, so i just found this in the golive to dw transition forum...i think this starts to explain what i need to know...
http://www.adobeforums.com/webx/.3bc63381/3

JTree path question

I have created a program that basically simulates single celled organisms in a random (non graphical) world, and I want to use a JTree to show the family history and allow the user to bring up an organism's stats by clicking on in the the Jtree, but I have a problem. Each organism has a unique ID number (starting at 0) and that's what I want to display on the tree. I have the code working to add the new organisms to the root, but I want them added as a child to the parent (each child has only one parent for these organisms), but I don't know how to do it. I tried using insertNodeInto but since everything after the root is dynamically generated I don't know how to identify the parent correctly (just using the ID doesn't seem to do anything). Do I need to create a method that somehow copies the entire treemodel into a collection and steps through it? I have the organisms in a collection already (an arraylist to be exact), so I could figure out the lineage by stepping through that, but then how do I build a 'selection path' object that will work to tell Java exactly where I want the child to go? Is the selection path just some kind of array, or is it even possible to build a selection path without a user clicking on a tree node? I hope you can figure out what I'm trying to say here and I appreciate any help you can give.

Start by creating a Map that has your organisms as the key and the nodes they are in as the value. Or just let the organism include a reference to the node that contains it. Either of those would allow you to identify the TreeNode that contains a particular organism.

Compound Path Question

Aside from using them to cut holes in shapes, are there any other reasons to create a compound path? They seem to be similar to a grouping paths so I just wondered.

Thanks for the reference to the manual. Made things much clearer.
I saw in the manual that you can move items inside a compound path so I tried it and found something interesting: I drew 2 rectangles, one inside the other. If you use the Group Selection tool, you can move the inner rectangle around by grabbing it by it's side or corner anchor point. If you use the Direct Selection tool, you can move it by clicking in the exact center and after that (as long as it's still selected) you can click by it's side or corner anchor point and move it. If you don't click the center first, then the Direct Selection tool will just move a side or an anchor point but not the rectangle. If that isn't interesting enough, if you are using the Direct Selection tool and hold down the Option key, the cursor changes to the Group Selection tool but if you try to grab the inner rectangle and move it, you will duplicate it instead??

System.setProperty("java.library.path") question

Is there a way to dynamically specify which directories the System.loadLibrary picks up its DLL's and libraries from ?
I have read a few places saying no, however, WHY even have a System.setProperty("java.library.path") function? If there truly is not, then can there be a jni directory added to the WAR directory structure so that tomcat et. al. can access them

Is there a way to dynamically specify which
directories the System.loadLibrary picks up its DLL's
and libraries from ?No.
You can however use System.load().
I have read a few places saying no, however, WHY even
have a System.setProperty("java.library.path")
function? That are many reasons for having setProperty(). For example if you want to set your own property.
If there truly is not, then can there be a
jni directory added to the WAR directory structure
so that tomcat et. al. can access themBecause it extracts them into a directory which is in the OS path presumably.
The OS, not java, loads shared libraries. And that means that the OS has to be able to find it. So JNIs are not loaded from a war/jar. They must be extracted first.

Interleaving to Fast Path Question

Similar Messages

Maybe you are looking for