Intermac Printers- Label printing

Dear Experts,
Can some one provide me with a very detailed document regarding label printing with Intermac printers. I'm relatively new to lablel printing
Thanks for all.
-Amit

Hi,
User manuals are available on below link.
http://home.intermec.com/eprise/main/GSS/Service/Content/Manuals/Show_ManualSearchResults?Product=PRTR3400D&Language=English
Regards,
Suhas

Similar Messages

Label printers - label printing

Hello all,
I have a scenario where i have to print shipping label, when i carry out outbound delivery processing.
we are in the process of setting up new label(zebra) printers, and would like to know whether i have to mention the label printer name in the print control function in the configuration.
if the basis team sets up the label printer in SAP, will the label print automatically in the zebra printer based on the print code or should i mention the label printer name in the print control function under configuration.
Thanks,
Maxx

Max,
Usually for LOCL printing if it is only one shipping point or per delivery type then you can setup a condition record in NACE tcode.
Also the access sequence needs to be setup before the condition records
If you have multiple shipping points and different printers setup by the basis team then you would have to setup the output in VP01SHP or LE>Shipping>Basic Shipping Functions>Output Control>Define Print Paramets shipping.
Please let me know if you have more questions.
Regards
Kiran

Primera LX 400 Label Printer No Longer Working with Mountain Lion

Hi-
I upgraded my OS to Mountain Lion and most everything works OK except my Primera LX400 label printer. The error message I get when trying to install the driver is "Software for this printer isn't available from Apple. Contact the printer's manufacturer for the latest software."
I contacted Primera but I haven't received an answer yet. Anyone else solve this problem with Mountain Lion and Primera Printers?
For those that depend on the Primera printers, you might want to wait before upgrading.

For those with the same problem, Primera says they will have new drivers up 7/31/12:
http://www.primera.com/primera_printer_drivers.html
I decided to check a day early (7/30/12) and the driver for my LX400 is up and I was able to install and use it successfully.

Cannot Print to CUPS Printer, UPS Label Printer

After upgrading to Mavericks, I can no longer print to my UPS Label Printer which utilizes the CUPS drivers. I have tried deleting the printer and reinstalling it. No luck. All other printers are working fine. Any ideas?

This is all about the driver!
Canon doesn't provide drivers that will work for a Windows-shared printer. You have to use a CUPS driver for that.
Your model isn't directly supported by Gutenprint (CUPS drivers included by Apple in OS X), but the newer Gutenprint has iP4500 and several models "close" to yours:
http://www.linuxfoundation.org/en/OpenPrinting/macosx
Experiment with a couple Gutenprint models.

Printing from an iPad to Dymo Label printer 750

Am i able to print labels from an iPad to a Dymo label printer 750 via a airport express?

List of supported AirPrinters.
http://support.apple.com/kb/HT4356
printing to a non-airprinter from an iPad
Buy another box
"The xPrintServer-Network Edition is a 'plug-and-print' hardware print server for printing from Apple iOS devices running iOS version 4.2 or higher. The device is roughly the size of an iPhone and uses the iOS native print menu. It requires no additional applications, software downloads, or printer driver installations and automatically discovers available networked printers supporting JetDirect / AppSocket, LPD and IPP protocols."
http://www.smallnetbuilder.com/cloud/cloud-devices/497-lantronix-shipping-airpri nt-server
To print from the iPad your going to have to install some more software:
-- many printer makers have iPad applications for printer. Look in the app store
-- generic software like Printopia
iPad Print Applications -- usually free:
Samsung
http://itunes.apple.com/us/app/samsung-mobile-print/id429611283?mt=8
HP App, ePrint Home & Biz
http://itunes.apple.com/us/app/hp-eprint-home-biz/id299531647?mt=8
http://h10025.www1.hp.com/ewfrf/wc/searchResults?tmp_product=HP+Photosmart+5515+ e-All-in-One+Printer+-+B111a&product=5063608&tmp_qt=eprint&cc=us&dlc=en&lc=en&su bmit
Lexmark and possible Dell
http://itunes.apple.com/us/app/lexmark-mobile-printing/id469415392?mt=8
more helper apps see
http://www.howtogeek.com/102671/how-to-enable-airprint-for-ios-printing-from-any -mac-or-windows-pc/
Generic Software:
You can connect the printer to a computer and install software on your iPad/computer to print from your ipad to the comptuer then to the printer.
example:
http://www.ecamm.com/mac/printopia/
Should you have some office printer that are connected to a computer there are print enablling applicaionts you can run on the iPad to print to such printers.
For Windows, try: PrintBreau, or PrintCentral.
PrintCentral Pro
http://itunes.apple.com/us/app/printcentral-pro/id426362921?mt=8
Source: https://discussions.apple.com/thread/2729284?start=0&tstart=0
Thanks to AirPrint Hacktivator you can turn any printer connected to your Mac or Windows PC into an AirPrint compatible printer. from:
http://osxdaily.com/2010/12/01/make-any-printer-airprint-compatible/
this google query will give you more options
ipad airprint via mac

Custom Label Printing - Print position creeps up and across labels

Hello
I am using VS 2010 and have updated to SP4 for Crystal Reports
I used the custom size option to make a label report. The built in options for label sheets do not match the labels that I have
I made a label report for 3 columns and 8 rows using the label size, margin widths top and bottom, left and right, with the 2 widths between the columns. But this does not print correctly on the labels. The printing on the label rows creep up so by the time you reach the 8th row the label is partly on the 7th Row. The left hand column prints correctly. the middle column prints closer to the left edge of the label than in the first column and the third column is printing on the gap between the 2nd and 3rd column.
I tried making a new report and set the dimensions to the maximum sizes that would allow 24 labels (3 columns and 8 rows) but the same problem occurs as when having set the correct sizes
I am not sure if there is a method to edit the label sizes, and margin widths as happens when creating a new report or if the only option is to create a new report.
Any assistance or information on how to make the labels print with the correct row and column spacing would be appreciated.
My Labels are 67mm x 36mm. there is no space betwwen the rows, the margin at the top and bottom of the sheet are the same, and the left and right margins are the same. The space between the columns is 2mm

Thank you for the reply Rob
There is no Avery template in the list that has 24 labels, which is why I was using the Custom Label
I have tried many variations trying different widths and gaps between the labels, but in all cases by the time the 8th row is printeed the printing has crept up and is now overlapping onto the bottom of the 7th row label. The third column is printing on the gutter between the 2nd and 3rd column.
When creating a Custom label it would appear that the Wizard works on Letter size Paper regardless of the paper size that the printer is set to. All my printers are set to A4 size paper.
Letter Paper is 215.9mm x 279.4mm compared to 210mm x 297mm for A4. While the width is not a problem the length is less, and that may well be what is causing the problem when the Wizard creates the labels, despite changing the Paper size to A4. But the paper size can only be changed and set to A4 after the wizard has been given the label size and spacing for margins and gutters.
In my view the Wizard should ask for the paper size and then ask for the label size settings and layout
Regards
David

Frequently changing label printing requirements

hello there,
business scenario ; labels required for shipments, keep changing frequently and going forward this needs to be done in SAP. does anyone know how to address this issue ???

Hi,
You can print shipping labels from SAP itself . The are configured under Value Added services in Warehouse Management. Most of the time you have to design your own labels using SAPSCRIPT or SMARTFORMS. Smartforms are recommended as you do not necessarily need ZEBRA printers to print labels.
Thanks
Funky Tech.
Edited by: Funko Technical on Nov 18, 2008 9:06 PM

How do we enable cutter option in the SAP Script for Zebra Label Printer

Hi Gurus,
We use Zebra Label(ZM400) printers to print the material documents(SAP Script). Could someone please tell me how do we enable the cutter option in the Zebra printer for the SAP Script?
Your vaulable answers will be highly appreciated.
Thanks in advance.
Regards,
Manoj.

Hi Manoj,
In Script you dont want to add any logic for Label Cutter, It should be in the Zebra printer settings if the printing is over it should cut the paper. If the print area is predefined for your material label then you can make use of standard label papers (Like 2"x4", 3"x4"....)
Regards
GK.

Label printing issues in Sapscript

We are struggling with building a new label for a finished good. On previous labels we used barcode BC_CD39. This new label requires a mix of same barcode and 2D barcode. One of the issues is BC_CD39 is it is too big at 13mm. So we want to use CD39__00 which is 5mm. We have gone into SPAD and SE73 and we think we have this set up to work on the two printers involved. We have also followed instructions for 2D in 197177 for adding new small font. We also have a logo for printing. When I print the printout does not have the smaller barcode, any text in smaller font and the logo is missing. I went into the spooler yesterday and these prints are getting an error (unknown print control should be output) that is talked about in note 17559. And when I look at the print preview I have a logo and different size fonts and smaller barcodes showing- basically all the stuff that is missing from the actual print. Has anyone else run into this and how have you resolved this? I am not sure what the spooler does not like. We are using a Printronix T5000e series printer.
The spooler error reads: character converter active when first problem occurred
Data was saved with character set 1100
Data will be converted to character set 9010 (synt = 9010)
and then it gives the OTF error mentioned above.
Our latest attempt is downloading tru fonts and getting them into the printer. Still no success and now the labels are not even printing.
Thanks for any help.
Susan

We continue with not being able to print this label correctly. If I do a screen shot I can see I have varying fonts on the label. But it completely ignores the various fonts on printing.
Our pirnter is a Printronix label printer.
My form is defined as landscape.
I get a spool error when printing that character set 1100 is being converted to character set 9010, which is custom for Printronix.
If we print on legal form vs the label form it prints fine.
We have tried different print drivers but nothng seems to get these fonts out.
We are using 5MM 3by9 barcodes.
This product is about to 'go live' and we really want to print this from SAP vs an external label software program. If we use an external label program separate from SAP it can print perfectly on same label printer.
We welcome any suggestions.
Susan

New Label Printing - Hazard Pictograms

Dear SAP Team,
Has anyone ever implemented the new GHS regulation that replaces old Hazard pictograms by the new ones?
There are 10 new diamond labels pictures that need to be printed in accordance with the type of substance.
Physical hazard, environmental hazard, health hazard.
Scenario:
SAP MM is linked to MSDS system to capture the data to be printed in labels.
My question is:
What are the resources required to have the new diamond labels printed ?
What type of ABAP/BASIS work is necessary to have the new pictures picked up at the moment of printing?
any help is welcome
Regards
Roger

Hi,
The steps are described in SAP Notes #135894 and #.
The main problem with label printers is that all these printers have their own unique printer languages which are not supported by the SAP system. So Note #183777 and #135894 describe a workaround.
All print data including all printer sequences are created by an external program and uploaded into the R/3 system. As per Note #183777, this is done with Intermec's design program LabelShop PRO.
You should use device type LB_INT to print the barcode labels. The SAP system only replaces the symbols and besides that it sends the print data to the printer which was uploaded.
So you need to design the label with LabelShop PRO or another third party program for Intermec label printers. You then need to upload the label file to a standard text in transaction SO10 as described in the Notes above.
Regards,
Aidan

Intermec PX4I Label Printing Problem

Hi,
We are facing issue while printing Bar Code Labels on Intermec PX4I label printer. While printing few labels could not print. When I tried to process the failed spool requests with the same settings again, the printer printed labels without any problem. After that the user was able to print the labels normally bust faces the smilar issue randomly. The user has to restart the printer to start the printer. We are facing similar issues on the other lable intermac lable printer as well.
When i checked the error log, I could see the below error:
SAP spool error log
      =====================
Print request processing log
Character converter active when first problem occurred
Data was saved with character set 4102
Data will be converted to character set 1117 (synt = 1117)
Errors occurred processing this print request
OTF module: Unknown print control SC400 should be output
OTF module: Unknown print control SC400 should be output
OTF module: Unknown print control SC400 should be output
OTF module: Unknown print control SC400 should be output
OTF module: Unknown print control SC400 should be output
OTF module: Unknown print control SC400 should be output
OTF module: Unknown print control SC400 should be output
OTF module: Unknown print control SC400 should be output
OTF module: Unknown print control SC400 should be output
OTF module: Unknown print control SC400 should be output
OTF module: Unknown print control SC400 should be output
OTF module: Unknown print control SC400 should be output
OTF module: Unknown print control SC400 should be output
OTF module: Unknown print control SC400 should be output
OTF module: Unknown print control SC400 should be output
OTF module: Unknown print control SC400 should be output
OTF module: Unknown print control SC400 should be output
OTF module: Unknown print control SC400 should be output
OTF module: Unknown print control SC400 should be output
OTF module: Unknown print control SC400 should be output
OTF module: Unknown print control SC400 should be output
OTF module: Unknown print control SC400 should be output
OTF module: Unknown print control SC400 should be output
OTF module: Unknown print control SC400 should be output
OTF module: Unknown print control SC400 should be output
Most important attributes of spool request
Request number 56457
Request name LVS1   AKN
Client 100
Owner AKN
Request attributes
Time created   2010072522521300
Remaining life +00007215825
Dispo 1 (Go/Hold) G
Dispo 2 (Keep/Delete)     D
Dispo 3 (Indirect/Direct) D
Default output device AUTZ
Default no. copies 1
Format DINA3
Main print request characteristics
Spool request number 56457
Print request number 2
Print request attributes
Time created   2010072600534800
Output device AUTZ
Format DINA3
Character converter active when first problem occurred
No information available
Any suggestions to solve this problem?

Hello Abhijeet
As you rightly pointed out, inspite of the above error label printing is not impacted.
The problem is that print control SC400 is not maintained in transaction SPAD.
Please refer to OSS note 17559 for more information.
Regards
Chokkalingam Pillai

Label printer syncing with Mac Address Book

Does anybody know of a good label printer that is at least somewhat compatible with Address Book? I know Address Book itself has limitations, but are there any label printers with software that can synch fairly simply with it?
Just curious -- any other related advice on the topic would be appreciated.
Powermac G5 Mac OS X (10.4.7)

The new Dymo Labelwriters all the way. We have been very impressed.

Intermec Strengthens Printer Portfolio with New Mid-Range Label Printer

Last Thursday, we were excited to announce the PM23c, a new 2”mid-range industrial printing solution and an extension of Intermec’s PM43 and PM43c printers.
Launching at the "Future Technology Experience" show in Las Vegas, the PM23c is an all-metal barcode label printer primed for mission critical markets and applications such as airline passenger services, manufacturing, and retail, including product labeling and food traceability, where maximizing productivity drives results.
Read on for more.

I like my Canon Pixma MX850. It is a network all-in-one, so it will work with any router, and it scans through the network as well as prints. The only slight hitch in setup is that it needs an initial USB connection to set up the network connection, but there has been no problems since then. I prefer a network printer to a USB printer, because it is made to work natively with a network connection, and you do not need to worry about compatibility with the print server, such as the one built into the Airport Express.
The only problem with it is that the price keeps going down since I bought it! However, you can save yourself a lot of grief if you stop shopping after you buy something.

I need to change the page setup to an unusual size for label printing

Hello. I'm trying to print a label that is 2" wide x 1-1/2 high. Firefox defaults to 8-1/2" x 11" or A4 page size and I've been unable to figure out how to change the default size to 2" x 1-1/2".
I've cleared all the margins to zero and removed all header and footer information. But how do I change the size to 2" wide x 1-1/2" high?
When I print, it will print the label correctly. However, it spits out 11" of labels instead of stopping at 1-1/2"
The printer is set up to accept the size (it's a Zebra label printer), but Firefox appears to be sending a page size that is different.
Any help here would be most appreciated.
Thank you

Thanks for your answer. Instead of formatting through FireFox, I had to go in and format it via the printer. Duh! Feel stupid not doing this first. If any one else has this problem, I was able to set it up on the printer by going to Printers > Printer Properties > Printer Preferences and set it up. Good luck and thank you for your reply.

What is the best wireless label printer for iPad?

What is the best wireless label printer for iPad?

The Epson Mobilelink P60 series and the Star Micronics T300 will work over wi-fi, but not being AirPrinter printers you'll have to find a third-party printing app that will work with them. The Epson P60 now also supports printing via Bluetooth, according to Epson:
https://pos.epson.com/products/MobilinkP60withBluetooth?ProductPK=679
Perhaps one of those would work for you.
Regards.

Intermac Printers- Label printing

Similar Messages

Maybe you are looking for