Intermittant Loss of Ability to Select Contacts
I recently updated to V 1.1.4 of iPhone software/firmware, but the behavior I describe below has occurred under both 1.1.3 and 1.1.4.
From time to time, I lose the ability to select all contacts within the Phone application. They appear, but none of them can be selected. Selecting items under other apps (Safari, Mail, etc.) works fine while I am experiencing the Contacts problem.
Turning iPhone off/on restores my ability to select contacts without losing any settings. Also, doing a Reset All Settings restores the ability to select contacts (with the down side that I lose Stocks, Weather, World Clocks and numerous other parameters that have been set).
Has anyone else experienced this problem? Any ideas re the source of the problem so I can avoid it in the future?
Thanks in advance for any ideas.
Jennifer,
Thanks for your response.
I did not attempt restoring (while backing up settings) since I was able to (temporarily) correct the problem via turning the iPhone off/on and also by doing the Reset All Settings function on the iPhone itself.
Are you suggesting that restoring per your link would resolve the problem itself so that it wouldn't happen in the future?
Bob
Similar Messages
-
Intermittent loss of UNC path access on Windows Server 2012
Hi All,
I hope someone can help with a major headache we've been having on two Windows Server 2012 boxes since September this year. Basically, these servers will intermittently lose the ability to browse network shares from windows explorer and the only way we have
found to resolve this is to reboot. When the issue happens, we can't even log into the server as it sits at 'applying user settings' - presumably as it is failing to access the netlogon share on our DCs. If we have an active RDP session when the issue occurs,
we can connect. In this instance we see that if you enter a UNC path in Windows explorer and hit enter, nothing happens - no error messages or anything. The only way I can get any response is when trying to access the IPC$ share on another server, which gives
the following response:
\\server\ipc$ is not accessible. You might not have permission to use this resource, Contact the administrator of this server to find out if you have access permissions.
The parameter is incorrect.
Everything looks right from a physical network perspective, as we can ping from the affected servers and DNS queries are working fine. I can even run net view from powershell and see the local servers and shares on these, however any attempt to access shares
just hangs the powershell session.
If I look in the SMBClient event logs, I can see entries like the following:
Event ID 30805
The client lost its session to the server.
Error: The transport connection is now disconnected.
This is made worse by the fact that when this issue happens, we can't even cleanly reboot the server (it just hangs) and have to perform a cold boot.
The firewall has been turned off and we have taken off our antivirus software to eliminate it as a possible cause. We have even rebuilt one of these servers on a clean install of 2012 R2, but the issue re-appeared. We have also tried using different NIC
drivers (Broadcom NICs installed) to no avail. We have also tried disabling IPv6.
We have logged a ticket with Microsoft support, who have come back telling us that this could be related to a known bug with DFS in 2012 for which a fix is being tested prior to release in a few weeks. However, I can't sit around on my hands until then on
the off chance that this fix will resolve our problem. These servers are hosting our production Lync 2013 front end service and when this issue occurs it breaks the address book search and response group services, so this issue is of critical importance for
us to get resolved asap.
Any help on this would be greatly appreciated.Hi,
That's right, if you hit enter absolutely nothing happens, no error messages. It makes no difference if I try name or IP address - even trying \\localhost doesn't work. A few minutes later after trying, an entry appears in the SMBClient event logs as mentioned
in my original post. To me it looks like something deep within the networking operations of the OS is randomly breaking. Also, if I try to browse the network from Windows explorer, it just hangs. When I try to restart the workstation service, it just gets
permanently stuck in a stopping state and the server has to be cold booted. Once it boots up, everything is working fine again....until the next time. There is absolutely nothing appearing in the application or system event logs indicating the root cause.
I've checked and DNS resolution is working OK and I can telnet to other hosts on all the required ports.
I had originally thought it might be related to the Broadcom NICs as we've had issues with them in the past, but we switched over to use the 2012 inbox driver for them and the same issue happens. I should also mention that one server is a blade and the other
a rackmount box. Dell support have run full diagnostics on both and have come up clean, so it doesn't appear to be a hardware issue. The even more baffling thing is that we have a third server with identical spec and config that does not have the problem.
The only difference with this third server is that it is not part of a Lync pool pairing using DFS and sits in a remote location on a different LAN.
I had thought of trying to drop back to use SMB1 by disabling SMB2 and 3, but I'm not sure if this would adversely affect any other services.
This one really has me stumped. -
My problem is a sudden loss of ability to get to PSE12 Organizer when I tried to load a saved scan. Had been using the Organizer and the Editor with no problems for several hours just before that.
Can not load the Organizer from the icon at the bottom of Editor screen, from the icon on the MacBook Air dock (OS 10.10.2), nor from the file in applications located with Finder.
I have tried without success to access Organizer after turning off and on the scanner, turning off and on the computer, loading a fresh copy of PSE12 from the CD, and restoring default preferences. I have searched on line for other options but not found any.
Can you help me?Not Charge
- See:
iPod touch: Hardware troubleshooting
iPhone and iPod touch: Charging the battery
- Try another cable. The cable for 5G iPod (lightning connector) seems to be more prone to failure than the older cable.
- If a 5G iPod
Iphone 5 lightning port charging problem - SOLUTION!
- Try another charging source
- Inspect the dock connector on the iPod for bent or missing contacts, foreign material, corroded contacts, broken, missing or cracked plastic.
- Make an appointment at the Genius Bar of an Apple store.
Apple Retail Store - Genius Bar -
Exporting selected contacts from Outlook 2011 for Mac
I've wanted to easily export a set of selected contacts from Outlook in Microsoft Office for Mac 2011. I've been through many threads about synching to Address Book and then exporting, but I've found a host of troubles, including duplicate copies of contacts being created.
So, I finally broke down and wrote an AppleScript script to export all of the currently selected contacts from Outlook to a file in either vcf (vcard) or csv (comma separated value) format. The best use of this script is to:
-- Install this as a script in Microsoft Outlook by saving the script below to Documents>Microsoft User Data>Outlook Script Menu Items
-- Change to your Contacts in Outlook. Use the Outlook search bar to find the contacts you want to export. You might search by name, category, company, or anything else that identifies the contacts you want to export. Or, you might just leave the view showing all contacts.
-- Select the contacts you want to export
-- Launch the script
The script will have you select between vcard and csv and select a destination file. This hasn't been optimized for speed, so if you're exporting 100's or 1,000's of contacts, be patient. And there isn't a progress bar at present, so you have to wait. It will display an alert when it's complete.
Sorry not to have a download location for you. You'll just have to copy the script text :-). Keep in mind there's been some but limited testing. Read the comments for details. And enjoy.
-- jsc
-- Export Outlook Contacts
-- (c) 2012 J. Scott Carr. The script is made available for free use, with no
-- warranty, under the Creative Commons license agreement.
-- This script has only been tested on Mac OS X 10.6.8 with Micrsoft Outlook for
-- Mac 2011 version 14.1.4.
property byCategory : "By category"
property byPattern : "Names matching pattern"
property vcardFormat : "VCard"
property csvFormat : "CSV"
-- main
set contactsToExport to {}
-- Get the contact selection
set contactsToExport to get_contacts_to_export()
if (count of contactsToExport) is 0 then
display alert "Please select contacts to export and rerun script" as warning
return
end if
-- Shall we export to vcard or CSV?
set theFormat to vcard_or_csv()
if theFormat is "" then
display alert "Error: Must select VCard or CSV format" as warning
return
end if
-- Get and open the output file
set oFile to open_output_file(theFormat)
if (oFile is equal to -128) then
display alert "Canceled"
return
else if (oFile < 0) then
display alert "File open failed (" & oFile & ")" as warning
return
end if
-- Export the contacts
display dialog "About to export " & (count of contactsToExport) & " contacts in " & theFormat & " format. Proceed?"
if button returned of result is not "OK" then
try
close access oFile
end try
return
end if
if theFormat is vcardFormat then
export_to_vcard(contactsToExport, oFile)
else if theFormat is csvFormat then
export_to_csv(contactsToExport, oFile)
else
display alert "Invalid format" as warning
end if
close access oFile
display alert "Complete"
return
-- get_contacts_to_export()
-- We're going to export the Contacts currently selected in Outlook.
-- Check that the current selection is Contacts and not some other Outlook
-- object. Snag the selected Contacts and return them as a list.
-- A side note. When I started this, I built options to enter a matching
-- name string or select a category. And then it hit me that those features
-- are much more robust in Outlook, and it would be easy to just use the
-- current selection.
-- There is some strange behavior that Outlook needs to have recently been
-- the front, active window.
on get_contacts_to_export()
set selectedContacts to {}
tell application "Microsoft Outlook"
set theSelection to selection
if class of theSelection is list then
if class of the first item of theSelection is contact then
copy theSelection to selectedContacts
end if
else
if class of theSelection is contact then
copy theSelection to selectedContacts
end if
end if
return selectedContacts
end tell
end get_contacts_to_export
-- vcard_or_csv()
-- Get the format to use when exporting contacts
on vcard_or_csv()
choose from list {vcardFormat, csvFormat} with prompt "Select export file format:"
if result is false then
return ""
else
return first item of result
end if
end vcard_or_csv
-- open_output_file()
-- Open the destination file for the export, returning the file descriptor or the error number
-- if the operation fails
on open_output_file(exportType)
-- Get the filename, letting "choose file name" deal with existing files.
set theDate to current date
set theTime to time of theDate
if exportType is csvFormat then
set fileName to "contacts.csv"
else
set fileName to "contacts.vcf"
end if
try
set outputFile to choose file name with prompt "Select export destination file" default name fileName
on error errText number errNum
return errNum
end try
-- Open the file
try
-- Open the file as writable and overwrite contents
set oFile to open for access outputFile with write permission
set eof oFile to 0
on error errText number errNum
display alert "Error opening file: " & errNum & return & errText as warning
try
close access oFile
end try
return errNum
end try
return oFile
end open_output_file
-- export_to_vcard()
-- Export each of theContacts to the open file outFile as a set of vcards. Note that the
-- vcard data is from the "vcard data" property of the theContacts. This routine
-- doesn't attempt to reformat an Outlook vcard, nor limit the fields included
-- in the vcard.
on export_to_vcard(theContacts, outFile)
set vcards to {}
tell application "Microsoft Outlook"
repeat with aContact in theContacts
copy vcard data of aContact to the end of vcards
end repeat
end tell
repeat with aCard in vcards
write (aCard & linefeed) to outFile
end repeat
end export_to_vcard
-- export_to_csv()
-- Export each of theContacts to the open file outFile in csv format
on export_to_csv(theContacts, outFile)
set csvFields to {}
-- Get the fields of the contact to export
set csvFields to init_csv()
-- Write the header row
set nFields to count csvFields
write first item of csvFields to outFile
repeat with i from 2 to nFields
write "," & item i of csvFields to outFile
end repeat
write linefeed to outFile
-- Export the fields of the contacts in CSV format, one per line
repeat with aContact in theContacts
write build_csv_line(csvFields, aContact) & linefeed to outFile
end repeat
end export_to_csv
-- init_csv(): defines the fields to export when csv format is selected
-- Each of the fields in the list must match a name used in the routine build_csv_line().
-- The idea is to later create a a pick list so the user can select which contact properties
-- to export.
on init_csv()
set csvFields to {"first name", "last name", "middle name", "title", "nickname", "suffix", "phone", "home phone number", "other home phone number", "home fax number", "business phone number", "other business phone number", "busines fax number", "pager number", "mobile number", "home email", "work email", "other email", "company", "job title", "department", "assistant phone number", "home street address", "home city", "home state", "home country", "home zip", "business street address", "business city", "business state", "business country", "business zip", "home web page", "business web page", "note"}
end init_csv
-- build_csv_line(): format one line for the csv file
-- Parameter csvFields determins which fields to include in the export.
-- Unfortunately I've not figured out how to use perl-style generation of
-- indirect references. If I could, this would have been much more elegant
-- by simply using the field name to refer to a Contact properly.
-- Note that email address are a special case as they're a list of objects in
-- Outlook. So these are handled specially in the export function and can only
-- be selected by the column names "home email", "work email", and "other email".
-- Outlook allows a contact to have more than one of each type of email address
-- but not all contact managers are the same. This script takes the first of
-- each type. So if a contact has more than one "home" email address, you will
-- only be able to export the first to a csv file. Suggest you clean up your
-- addresses in Outlook to adapt. The alternative is to support multiple
-- columns in the csv like "other email 1" and "other email 2", but that's not
-- supported in this version.
-- Another note. In this version, any embedded "return" or "linefeed" characters
-- found in a property of a contact are converted to a space. That means that
-- notes, in particular, will be reformated. That said, this gets arond a problem
-- with embedded carriage returns in address fields that throw off importing
-- the csv file.
-- Also note that at this time IM addresses aren't supported, but it's an easy add
-- following the same logic as email addresses.
on build_csv_line(csvFields, theContact)
set aField to ""
set csvLine to ""
set homeEmail to ""
set workEmail to ""
set otherEmail to ""
tell application "Microsoft Outlook"
set props to get properties of theContact
-- Extract email addresses from address list of contact
set emailAddresses to email addresses of props
repeat with anAddress in emailAddresses
if type of anAddress is home then
set homeEmail to address of anAddress
else if type of anAddress is work then
set workEmail to address of anAddress
else if type of anAddress is other then
set otherEmail to address of anAddress
end if
end repeat
-- Export each desired fields of the contact
repeat with aFieldItem in csvFields
set aField to aFieldItem as text
set aValue to ""
if aField is "first name" then
set aValue to get first name of props
else if aField is "last name" then
set aValue to last name of props
else if aField is "middle name" then
set aValue to middle name of props
else if aField is "display name" then
set aValue to display name of props
else if aField is "title" then
set aValue to title of props
else if aField is "nickname" then
set aValue to nickname of props
else if aField is "suffix" then
set aValue to suffix of props
else if aField is "phone" then
set aValue to phone of props
else if aField is "home phone number" then
set aValue to home phone number of props
else if aField is "other home phone number" then
set aValue to other home phone number of props
else if aField is "home fax number" then
set aValue to home fax number of props
else if aField is "business phone number" then
set aValue to business phone number of props
else if aField is "other bsiness phone number" then
set aValue to other business phone number of props
else if aField is "bsuiness fax number" then
set aValue to business fax number of props
else if aField is "pager number" then
set aValue to pager number of props
else if aField is "mobile number" then
set aValue to mobile number of props
else if aField is "home email" then
set aValue to homeEmail
else if aField is "work email" then
set aValue to workEmail
else if aField is "other email" then
set aValue to otherEmail
else if aField is "office" then
set aValue to office of props
else if aField is "company" then
set aValue to company of props
else if aField is "job title" then
set aValue to job title of props
else if aField is "department" then
set aValue to department of props
else if aField is "assistant phone number" then
set aValue to assistant phone number of props
else if aField is "age" then
set aValue to age of props
else if aField is "anniversary" then
set aValue to anniversary of props
else if aField is "astrololgy sign" then
set aValue to astrology sign of props
else if aField is "birthday" then
set aValue to birthday of props
else if aField is "blood type" then
set aValue to blood type of props
else if aField is "desription" then
set aValue to description of props
else if aField is "home street address" then
set aValue to home street address of props
else if aField is "home city" then
set aValue to home city of props
else if aField is "home state" then
set aValue to home state of props
else if aField is "home country" then
set aValue to home country of props
else if aField is "home zip" then
set aValue to home zip of props
else if aField is "home web page" then
set aValue to home web page of props
else if aField is "business web page" then
set aValue to business web page of props
else if aField is "spouse" then
set aValue to spouse of props
else if aField is "interests" then
set aValue to interests of props
else if aField is "custom field one" then
set aValue to custom field one of props
else if aField is "custom field two" then
set aValue to custom field two of props
else if aField is "custom field three" then
set aValue to custom field three of props
else if aField is "custom field four" then
set aValue to custom field four of props
else if aField is "custom field five" then
set aValue to custom field five of props
else if aField is "custom field six" then
set aValue to custom field six of props
else if aField is "custom field seven" then
set aValue to custom field seven of props
else if aField is "custom field eight" then
set aValue to custom field eight of props
else if aField is "custom phone 1" then
set aValue to custom phone 1 of props
else if aField is "custom phone 2" then
set aValue to custom phone 2 of props
else if aField is "custom phone 3" then
set aValue to custom phone 3 of props
else if aField is "custom phone 4" then
set aValue to custom phone 4 of props
else if aField is "custom date field one" then
set aValue to custom date field one of props
else if aField is "custom date field two" then
set aValue to custom date field two of props
else if aField is "note" then
set aValue to plain text note of props
end if
if aValue is not false then
if length of csvLine > 0 then
set csvLine to csvLine & ","
end if
if (aValue as text) is not "missing value" then
set csvLine to csvLine & "\"" & aValue & "\""
end if
end if
end repeat
end tell
-- Change all embeded "new lines" to spaces. Does mess with the formatting
-- of notes on contacts, but it makes it cleans the file for more reliable
-- importing. This could be changed to an option later.
set csvLine to replace_text(csvLine, return, " ")
set csvLine to replace_text(csvLine, linefeed, " ")
return csvLine
end build_csv_line
-- replace_text()
-- Replace all occurances of searchString with replaceString in sourceStr
on replace_text(sourceStr, searchString, replaceString)
set searchStr to (searchString as text)
set replaceStr to (replaceString as text)
set sourceStr to (sourceStr as text)
set saveDelims to AppleScript's text item delimiters
set AppleScript's text item delimiters to (searchString)
set theList to (every text item of sourceStr)
set AppleScript's text item delimiters to (replaceString)
set theString to theList as string
set AppleScript's text item delimiters to saveDelims
return theString
end replace_textThank You, but this is a gong show. Why is something that is so important to us all so very, very difficult to do?
-
When I open my contacts I do not have a choice to EDIT selected contacts. What can I do to fix this?
When I open my contacts I do not have a choice to EDIT selected contacts. What can I do to fix this?
Turn on iCloud in the settings.
-
How to get the address of the selected contact name
Hello All,
Hi can anybody help me for nowing the Index(address) of the selected contact name after serching the list of contact names.
Thanking Youthis is done using PIM Api search it
-
Why do I get "communication error" when selecting Contacts in Backup Assist Plus?
Have reset Backup Assistant Plus due to sync Errorcode 5 using Verizon response to others in this forum. After running Backup Assist Plus again, I find that I cannot select Contacts for backup. I get a message that says "Error - There was a communication error". I was able to select pictures and these were successfully backed up. Any suggestions?
Hello BobS3!
We absolutely want to make sure your contacts are backing up as well! I'm sorry you're running in to this concern. Let's figure this out together. Just to clarify, you mentioned you reset Backup Assistant Plus. Was this by following these steps: http://vz.to/14Iv5eS and clearing the data for the Sync Service and Backup Assistant apps?
Additionally, here is the easiest way to backup your contacts: http://vz.to/17zlkh3
Let me know the results!
Thanks!
MelissaM_VZW
Please follow us on Twitter @VZWSupport -
Ability to sort contact in palm
I recently was upgraded to 6.2.2
It appears the that the ability to sort contacts by first names is gone?
Can it be recovered?
Post relates to: Palm IIIeSounds like you should organise all your folders by date order and give them a descriptive name, That way you can find things far more easily. Then you should keyword the pics so you can find within entrire library.
here's a fictitious set of folders to demonstrate.
2008/
2008-01-January/
2008-01-29 Gardening
2008-01-29 Night Out
2008-01-31 Trip to Zoo
2008-02-Febuary/
2008-02-01 Dog's birthday
2008-02-03 Cat's Birthday
2008-02-03 Race Meet
This structure as shown above is also good in that it will survive different programmes and even different OSes. Are you going to rely on Adobe, let along LR being around in 30yrs time? One should never let a programme dictate your fundamental filing structure - iPhoto, iTunes yuck, messy.
I also try and separate out differing shoots from each day as I'm hardly likely to want to look through gardening and night out shots together and it also speeds up individual folder rendering.
This specific structure is designed so it will always correctly arrange by date, do this and your problem is solved as LR simply imports your folder structure.
I've used this for a long time now and it's very robust.
Though
2008 - 02 - 17
also works as does
2008_02_17
just be consistent with what ever suits you.
I prefer using dashes to underscores, more readable and easier to type and I think this method
20080117
is stupid/useless [unless you are a computer].
I use Bridge to import from Cards [LR sucks at importing as it doesn't copy all file types] and you can set Bridge to place images in folders by date shot automatically. -
since i updated the software on my iphone 4 i have intermittant loss of sound i have researched and this is a common problem trouble is no one has an easy fix answer the best suggestion is to revert the phone back to the old software but i have no idea how to do this and apple dont seem to be acknowleging that they messed up with the update so if anyone can help i would be very gratefull
many thanksI have been there and done that.....makes no difference. Why do you think that the all of a sudden it would change the output in the first place? Things don't change by themselves for no apparent reason. It was still on the bose speakers when I went into sys pref. Amazing that you think that it would change itself everyday....did you really read my post or were you distracted?
-
I have selected one picture from iphoto then went to print where i selected contact sheet...the one pic showed up on the contact but was unable to fill the sheet with the multiple of the one picture
The root level of the drive that is mounting. Like this
-
I rented Micheal Clayton on HD a couple of days ago (my second HD rental), noticed that the movie playback had intermittent loss of audio whether I set it to DD5.1 or not it made no difference.
The audio loss don't seem to happen at the same scene everytime I rewind and play it back all over again. It seems to happen at random scenes during the movie playback and several times there was no audio for nearly 5 to 10 seconds before it reappears and when I rewind and playback the same scene again, the audio seems to be alright for most parts?
I am wondering if any other users have had similar audio issues with rented movies from iTunes?
This is like my first rental movie which had issues with audio, the previous 3 or 4 rentals did not have any audio nor video issues. It's not my ATV unit either because movies and music videos which I already own, playback on it just fine in DD5.1 via Optical and HDMI. So the issue was just with that one movie which I rented then.
I am wondering how could one demand for a refund from Apple when faced with such problems or issues after the rented movie dissappears from your ATV 24 hours later??
Now I am feeling cautious to rent another movie, what if I have another issue with which ruins the movie experience?
I think I will stick with my PS3 and Blu-Ray for now.Not sure but I thought I read in another issue that if you connect a TB cable from your Mini into the TB port on the display and the audio/video is OK then that would mean the built-in cable is bad. I have never tried this so not sure it would work. Hate to buy a TB cable just to test because of cost. The other way would be to take to Apple store and have them check the cable. It contains miniture IC boards and one could be bad.
-
ICloud. Fatal error. The loss of most of the contacts.
iCloud. Fatal error. The loss of most of the contacts.
Здравствуйте, я являюсь пользователем многих ваших устройств, в числе которых iPhone 4. Живу в России, город Новороссийск.
Сегодня при попытке воспользоваться сервисом iCloud я столкнулся с серьезной проблемой.
После попытки синхронизации я потерял бОльшую часть своих контактов.
Очень прошу Вас помочь мне, и восстановить потерянные мною данные.
Я обращался к местному представителю Apple. По его словам словам, произошел сбой в iCloud и решить подобную ситуацию можете только Вы.
Мой AppleID: [email protected]
Заранее благодарю.
С уважением,
Алексей Милованов
+7(903)4471821
Для Вашего удобства прилагаю перевод моего письма на английский язык, сделанный с помощью сервиса Google.
Hello, I am a user of many of your devices including the iPhone 4. I live in Russia, the city of Novorossiysk.
Today, when you try to use the service iCloud I was faced with a serious problem.
After trying to sync I lost most of their contacts.
I beg you to help me, and I have to recover lost data.
I went to the local representative of Apple. According to him, said, failed to iCloud and resolve this situation only you can.
My AppleID: [email protected]
Thank you in advance.
Sincerely,
Alex Milovanov
+7 (903) 4471821
For your convenience, I attach my letter translated into English, made by the service Google.
ps. I beg you to help, my whole life was connected with these contacts. I seriously, threatening trouble at work, if they can not be restored.
I hope you very much.Gerry,
1. I uninstalled WSUS, removed DB, restarted. And reinstall WSUS again. This time MS Management Console of WSUS could not be started. I did it after WSUS was added following your blog pix.
I checked c:\program files\update services, there were couple of missing directories by comparison what was in case when I installed WSUS after SQL but before CM: Tools, Shema, and another A.. something. I saw this issue on NOOB. And people copied these
directories from previous installation.
How we can explain this behavior on RTM version?
Then I uninstalled it again. And give another try... Here I found another interesting thing. Please compare your slide number 5 from your link and attached one. You can see that on Add Roles and Features Wizard page are missing items. Some
of them were found in next screen of my installation (I am using RTM server) but one API and Power shell cmdlets were not listed on final screen before start install. May be those are note important...
I reinstall again... and the MS Management Console fails again. Exactly the same thing that I saw during 2 weeks of trying to make works. Don't see what I can screw up here.
What about missing directories after reinstalling WSUS. Is that normal? And in IIS there is no WSUS.
I don't see here any difficult thing, just simple wizard... But it not works. Second CM server.
What I do wrong here to create a failure of MMC. There is any blog with examples of RTM Server 2012 and CM RTM. All stuff is 2012. So kind of guesses and no precise thing to do...
Sorry for my cry :). The only solution is to call MS and pay $250 for SUCH a trivial thing that not works.
Any help? Please see pics. Can you confirm that you have the same or more directories in Update Services
Thanks.
API and Power Shell Cmdlets feature missed if compare with yours slides.
"When you hit a wrong note it's the next note that makes it good or bad". Miles Davis -
Can iSync sync only selected contacts?
I want to use iSync with my new cell phone, but my address book on my Mac is much larger than on my phone.
I don't want to include everyone on my Mac on my phone.
Is there any way to tell iSync to sync only selected contacts or contact groups?
Thanks,
DavidClick on your phones icon in iSync, and choose which groups to sync from the list that appears. Edit the groups in Address Book.
-
Intermittent Loss of Communications with Solaris 10
With a 32 port Terminal Server, if greater than 28 ports are connected to
active hardwired patient monitoring devices, our application on
Solaris 10 experiences intermittent Loss of Comms one port (which a patient device is connect to) at a time. This happens whether or not other terminal servers are attached and has nothing to do with total device load load. We have been able to sustain device loads greater than 60 patients with NO comms loss as long as the 32 port Terminal Server(s) has 28 ACTIVE PORTS OR LESS.
The Loss of Comms ONLY occurs for devices connected to the 32 port
Terminal Server with greater than 28 ports connected to active devices.
This does not occur with Solaris 8. It only occurs with Solaris 10
11//06.
Is this a TCP/IP configuration issue?
I've begun trying to use DTRACE with Provider "mib", but need to narrow
down the "filtering" to only trace on exactly what is needed to get to the root of this issue.
Anyone have any ideas?I had the same problem. I tried all the obvious stuff (reset etc) and tried some of the random fixes suggested on here.
Have you tried cleaning all the gunk from the charger port? Mine was clogged with pocket fluff so I got in about it with a tooth pick - problem solved!
Good luck :) -
Vexing intermittent loss of Internet
For about six weeks now I have been experiencing a troubling intermittent loss of Internet service. It's like on, off, on, off, on, off, etc. It changes minute to minute. I click on a link and get a message saying the web site can't be reached, try reloading.
Then I'll click on the link and Internet is back. Three or four minutes later its on again, then off again, etc.
I'm on my third or fourth modem/wireless router, the last one being installed by a Verizon tech. When the problem continued they sent another tech who replaced my ONT. Still the problem persists.
This loss of Internet occurs when using my hard wired desktop and wireless laptops used by me and others in the house.
Don't know what to do next except maybe go back to Cablevision.
We're talking northern Westchester County, N.Y.I'm sorry you are having difficulty. An agent with access to your account will reach out to you directly by email, private message in the Forums and/or the billing telephone number on your Verizon account for more information or to help you resolve your issue.
Maybe you are looking for
-
IPod Touch 2G Update Problem from 2.2.1 to 4.2.1
Hi @ all and at the first, sorry for my bad english. I have a strange problem with my iPod Touch 2G 32GB. At the moment there is the version 2.2.1 installed. When i connect it to the pc, there pop's up a Message, that there is a new version (4.2.1) a
-
Minimum DB2 resources needed for a WL ConnectionPool to DB2 on UNIX?
I posted this same message to the DB2 group as well.... I want to create a ConnectionPool to a DB2 database using the Weblogic App Server v6.1 running on UNIX/Solaris 8. The DB2 database that I'd like to connect to resides on a separate server(on Win
-
I'm just trying out an external drive on my Macbook Pro. I happened to have the internal sound output from the Mac connected at the time and noticed that as soon as I connected the drive to the mains, the output became very noisy: as continuous serie
-
Hi, I am trying to select a tax classification code for an AP Invoice at line level and I couldn't find the respective codes. I checked in the Look up codes with ZX_INPUT_CLASSIFICATIONS and they are enabled and active. Request you to guide me furthe
-
All event listeners and models in one file?
I have one java file for all my event listeners of a programm and one java file for all my models. Is this good? I create instances with new AllInOneHandler.MouseHandler() for example. Or should I have one file for each event and each model?