Intermittent backups with TimeCapsule after upgrading to 10.7.2 from 10.6.x

I upgraded to 10.7.2 from the latest version of 10.6.x yesterday. I'm still getting the bugs out.
One of the bugs is that my TimeCapsule seems to back up successfully only intermittently. I've gotten some error messages which say something about not being able to access the drive (I don't recall the exact text of the error message right now). After trying to select the TimeCapsule a few times with no luck I gave up.
When I came back to it a few hours later it seemed to have worked. Thus the "intermittently successful" part.
Anyone else having problems like this?
Thanks.

Yes, it is common problem.. Lion and latest TC firmware not a great combo.. go back to 7.5.2 and it is much reduced.
https://discussions.apple.com/thread/3526741?tstart=0
many others now getting to the bottom of it.

Similar Messages

Problem with TimeCapsule after upgrading to new mac...

hi,
I bought a new UniBody MacBook just before Xmas, and turned off TimeMachine during the upgrade from my PowerPC G4. Since then, until now, I stupidly forgot to turn it back on. Now I did remember, it doesn't work! It tells me it it failed with the detail of the error message "The backup disk image could not be created." So I chose the TimeCapsule disk again, enter the password, the settings reset, force it to back up now, and AGAIN it fails...
My HD is bigger (232GB) than the free space on the TimeCapsule disk (178GB), can that be the issue? The used space of course is smaller (54GB).
Time Machine was THE reason I upgraded to Leopard, and right now, I'm stuck, so any help is appreciated.
Thanks,
Nadine

Thank you Mark,
I found out in parallel this was my problem: not only was the computer not named in "Sharing"
[go to Preferences - Sharing - add a name in the top field which is visible for all methods of sharing]
but it also didn't have a DHCP Client ID - adding that second name did the trick
[go to Preferences - Network - AirPort - Advanced - TCP/IP - add name with only alpha-numerical characters in the DHCP ID field, press ok.]
Now I have to decide when to delete the old backup which it doesn't seem to reuse... looks from other posts like that could be tricky.
Happy Backuping
Nadine

Hi, I have an iphone 3GS from HK. After upgrading to 4.3.3 from 4.3.2 as prompted by itunes on May 10, 2011 my entire contact in my iphone was wiped out! When I checked my backup file in Outlook Express it was also wiped out!!! What can I do now?

Hi, I have an iphone 3GS purchased in HK. After upgrading to 4.3.3 from 4.3.2 as prompted by itunes on May 10, 2011 my entire contact in my iphone was wiped out. When I checked my backed up file in Outlook Express, it was also wiped out during the synchronization. I tried to restore from backup on iTunes but still, the contact was not there anymore. I have contacted your HK Apple Hotline and talked to a technical support called TIMMY LO, he said there is nothing to do with them and he refused to provide any support to recover my contact, he even said I should try to pay extra money to 3rd party supplier and see what they can do to my iphone, despite the fact that this could be caused by the pre-mature release of 4.3.3 when a bug still hasn't been fixed. I am very disappointed at Apple's service, especially considering that I have been a loyal customer of iphone / ipod touch in the past few years. I need an official reply from Apple on this! How can Apple be so irresponsible to their own firmware failure??

Hi, I have an iphone 3GS purchased in HK. After upgrading to 4.3.3 from 4.3.2 as prompted by itunes on May 10, 2011 my entire contact in my iphone was wiped out. When I checked my backed up file in Outlook Express, it was also wiped out during the synchronization. I tried to restore from backup on iTunes but still, the contact was not there anymore. I have contacted your HK Apple Hotline and talked to a technical support called TIMMY LO, he said there is nothing to do with them and he refused to provide any support to recover my contact, he even said I should try to pay extra money to 3rd party supplier and see what they can do to my iphone, despite the fact that this could be caused by the pre-mature release of 4.3.3 when a bug still hasn't been fixed. I am very disappointed at Apple's service, especially considering that I have been a loyal customer of iphone / ipod touch in the past few years. I need an official reply from Apple on this! How can Apple be so irresponsible to their own firmware failure??

I am having problems with mail after upgrading to mountain lion. Is there a way to go back to lion?

I am having problems with mail after upgrading to mountain lion. Is there a way to go back to lion?

It would always be easier to fix the Mail problems.

ITunes doesn't sync iCal with iPhone after upgraded to Mountain Lion

iTunes doesn't sync iCal with iPhone after upgraded to Mountain Lion. I even tried to use Replace Information On This iPhone and it doesn't work. Any idea guys?

I'm having the same problem. It's as if my iPhone and MacBook Pro now have two separate calendars.
Basically, I have a MacBook Pro (Mountain Lion, 13", late 2011) that I sync via USB with an iPhone 4S (iOS 5.1.1). Before upgrading to Mountain Lion, all of my iCal events would sync flawlessly. But none of the events I've created in iCal (Calendars) since upgrading have synced to the iPhone. Likewise, no new events that I create on the iPhone Calendar will sync to iCal. Also, changes to an existing event (even one created before upgrading to Mountain Lion) don't get synced either.
Everything else seems to be syncing just fine though (music, apps, contacts, etc).

How itunes cannot sychrnoise with iphone after upgrading latest IOS

why itunes cannot sychrnonise with iphone after upgrading the latest IOS?

Sounds like your iPhone was previously hacked/jailbroken. If true, try using google.

Cannot find backslash (\) on German keyboard anymore after upgrading to OS 10.6 from OS 10.5

Cannot find backslash (\) on German keyboard anymore after upgrading to OS 10.6 from OS 10.5. It used to be at Alt-ß. Anyone can help please ?

Never mind. Found it in an old post. It is mapped at Shift-Alt-7, really weird.
The post is at:
http://www.innoq.com/blog/st/2003/12/backslash_on_mac_os_x.html

Issues after upgrading to 5.6.3 from 5.6.2

Hi,
The alignment of vertical lines in layout is off after upgrading to 5.6.3 from 5.6.2.
Did anyone have issues after the upgrade?
Thanks
Sudeep

Nothing noticeable

Yosemite does not recognize HP printer after upgrade. I can print from my iPhone, but not my 13" Macbook Air (2013)Yosemite does not recognize HP printer after upgrade. I can print from my iPhone, but not my 13" Macbook Air (2013)

Yosemite does not recognize HP printer after upgrade. I can print from my iPhone, but not my 13" Macbook Air (2013)
Are others having the same problems?

Try this. Worked for me.
- turn off your router
- turn off you Mac's after removing all available printers
- turn off all iDevices
- do a factory reset of your printer remove all cables min. 30 sec.
- turn on your router first
- ran the network set up wizard
- give your printer also a new name like "DeskJet 2015"
Something which you don't have used before.
- turn on your Mac's and add your printer
- turn on your iDevices at least.
Should work after these steps.
It worked for me including all iDevices.
iOS and Yosemite

Iphone 3gs problem with network after upgrading to 5.1.1

Hi...
I have Iphone 3gs and requested official unlock from my provider. They said they did it and all I have to do is connect it with iTunes.
I had ios 3.x and upgraded to 5.1.1 through iTunes.
But now after upgrade, my phone is not unlocked and niether works with original card.
3G network is one second ok, after one second drops to 1 line, and after that I got No network.
I managed to make call, but that call only last for 1 second.

I wouldn't assume that. Don't know anyone who changed carriers without canceling the original. The intermittent connections he describes are typical of SIM card issues.
The point is that your statement that "updating is not enough" is incorrect. When he "updated" to iOS 5, a full restore was already done. If there were errors during that process, restoring again might help, but its not necessary to restore.

Problem with BIS after upgrading to v5.0.0.822 (1385) :(

Hi all,
I have a Bold 9000 and after upgrading software to v5.0.0.822 (1385) my BIS start working. I do have BIS conection, however the service is turned off on the phone. How can I activate this? If try to acess to the web the web browser tries to connect to wi-fi and I cannot change the type of connection to BIS.
Very grateful for our help.
Best regards,
Bruno
Solved!
Go to Solution.

bsousa wrote:
my BIS start working.
Perhaps, you intend to say "stopped" working?
If you have a BlackBerry Data Plan on your service provider account, on your BlackBerry device, go to:
1. Options > Advanced > Host Routing Table > Menu > Register.
2. Resend your service books from your carrier BIS site:
From your handheld device:   http://www.blackberry.com/btsc/KB15402
Go to the Personal Email Set Up icon and log in. Then under Help!, select Service Books, then select Send service Books.
From your desktop PC: http://www.blackberry.com/btsc/KB02830
North American Carriers - scroll down to select your carrier
WorldWide Carriers - Find your carrier on the list
3. With the BlackBerry device powered ON, remove the battery a few seconds and then reinsert the battery to reboot. This reboot, even if you have already done this, is often needed to install the service books.
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4   Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA   Display/Scan Bar Code

Problems with 8310 after upgrading to V4.5

Alright I will start with my phone it has locked up and my alarm doesnt work all the time. I have taken the battery out and restarted it, this sometimes works but then it is back to not working again. My husbands phone is much worse it crackles real bad then it turns off. We werent having any problems with these phones until we did the upgrade. Is there someway to fix it?
Thanks
Jenn

Sorry Made mistake.... Disregard first post
TRY THIS
Had some problems after upgrade from tiger to leopard ...Clicked on mail and It wouldnt open.
Had to click on tool bar on top window/message viewer to see my inbox and stuff, then force quit to get out... plus email didnt work
checked all POP settings which were correct( I know cuz I looked at my macbook pro's POP settings and did the same on Imac)
Anyhow...called apple care ...EZ fix
Quit mail if yer on.
Go to Home folder/Library/mail/shiftClick on messageRules.plist And messageRulesplist.backup
Drag and drop messageRules.plist And messageRulesplist.backup to desktop... then highlight preferences folder and drag into that folder
If yer POP settings r right this should work
It did fer me!!!
Good luck
Message was edited by: soboo
Message was edited by: soboo

Problems with Mail after upgrading to 10.5.6

I was using my mail program without problems, until I upgraded to v 10.5.6 - when I tried to 'get new mail' I received the following message:
There may be a problem with the mail server or network. Check the settings for the account or try again.
The server error encountered was: The connection to the server on port 110 timed out.
I contacted my email provider (shaw.ca) and there are no problems with their server. So, I added another email account to check if it was the program, and I'm getting the same response with the new account I added.
Has anyone come across this issue? Any advice? Thank you!!

Sorry Made mistake.... Disregard first post
TRY THIS
Had some problems after upgrade from tiger to leopard ...Clicked on mail and It wouldnt open.
Had to click on tool bar on top window/message viewer to see my inbox and stuff, then force quit to get out... plus email didnt work
checked all POP settings which were correct( I know cuz I looked at my macbook pro's POP settings and did the same on Imac)
Anyhow...called apple care ...EZ fix
Quit mail if yer on.
Go to Home folder/Library/mail/shiftClick on messageRules.plist And messageRulesplist.backup
Drag and drop messageRules.plist And messageRulesplist.backup to desktop... then highlight preferences folder and drag into that folder
If yer POP settings r right this should work
It did fer me!!!
Good luck
Message was edited by: soboo
Message was edited by: soboo

I am experiencing delayed typing with texting after upgrading to IOS 7 - anyone seeing this?

Both my wife and I are experiencing delayed "typing" with texting after the upgrade to IOS7. Concisely, you can keep typing, but there is a noticable delay before the text appears in the message section. I have also noticed delays with entering my 4 digit Passcode.

Mine was so bad that it was nearly impossible to type in my passcode. I finally restored the phone (reinstalled the software) and then restored from backup. All is working fine now. This is on my iPhone4. The real trick was getting past the passcode and then turning off Find my iPhone (which is required to restore) when it was nearly impossible to type my password in.
It solved my problem. After I did it I read somewhere here to try resetting all settings. That would be quicker but you may lose some settings you had. In any case restoring completely solved my problem.
My iPad did not experience any of these problems.

Data Protector backup integration fails after upgrade to Oracle 11.2.0.2

After upgrading a system from Oracle 10.2.0.2 to 11.2.0.2, the Data Protector backup integration fails with error
[Normal] From: BSM@<dp_cell_server>.<domain> "<sap_host>_<SID>_Online" Time: 28.04.2011 09:10:21
     Backup session 2011/04/28-74 started.
[Normal] From: BSM@<dp_cell_server>.<domain> "<sap_host>_<SID>_Online" Time: 28.04.2011 09:10:21
     OB2BAR application on "<sap_host>.<domain>" successfully started.
/usr/sap/<SID>/SYS/exe/run/brbackup: error while loading shared libraries: libclntsh.so.10.1: cannot open shared object file: No such file or directory
[Major] From: OB2BAR_OMNISAP@pervs<SID>.<domain> "OMNISAP" Time: 04/28/11 09:10:21
     BRBACKUP /usr/sap/<SID>/SYS/exe/run/brbackup -t online -d util_file_online -c -m all -u system/******** returned 127
/usr/sap/<SID>/SYS/exe/run/brarchive: error while loading shared libraries: libclntsh.so.10.1: cannot open shared object file: No such file or directory
[Major] From: OB2BAR_OMNISAP@pervs<SID>.<domain> "OMNISAP" Time: 04/28/11 09:10:21
     BRARCHIVE /usr/sap/<SID>/SYS/exe/run/brarchive -d util_file -s -c -u system/******** returned 127
[Normal] From: BSM@<dp_cell_server>.<domain> "<sap_host>_<SID>_Online" Time: 28.04.2011 09:10:22
     OB2BAR application on "<sap_host>.<domain>" disconnected.
[Critical] From: BSM@<dp_cell_server>.<domain> "<sap_host>_<SID>_Online" Time: 28.04.2011 09:10:22
     None of the Disk Agents completed successfully.
     Session has failed.
We checked the configuration, tried linking /oracle/client/11x_64 to 10x_64, removing the link and renewing the 10x_64 oracle client, but still Data Protector can't find the library libclntsh.so.10.1. A new system which was installed with Oracle 11.2.0.2 doesn't have any problems with online backups.
Any help is appreciated!

Hi,
did you create the other link according to the upgrade guide (point 5.5) ?
You need to create this link so that BR*Tools
(which is linked to the Oracle 10.2 client)
can use the newer Oracle 11.2 clients.
After the software installation has finished,
create a symbolic link in $ORACLE_HOME/lib as follows:
cd $ORACLE_HOME/lib
ln u2013s libnnz11.so libnnz10.so
or (HP-UX)
ln u2013s libnnz11.sl libnnz10.sl
Volker
Second part: For the DP job, there can be set different environment settings inside the DP job.
Did you check if there are still relicts from the previous release ?
You could integrate a small pre-exec script into the job and let it plot the output of
id
env
set
to a logfile, just to see which values the backup is using.
Edited by: Volker Borowski on Apr 29, 2011 10:12 AM

Intermittent backups with TimeCapsule after upgrading to 10.7.2 from 10.6.x

Similar Messages

Maybe you are looking for