Intermittent behavior and Error Code: -600

I would first like to state, I have not any issues in the last 5 years. I went from Jaguar to Tiger, without a hitch. Of course, this is very old G4/450 [Will be getting a Mac Pro fairly soon]. For the most part, everything has been near perfect. However, recently I installed ProAppRuntime.pkg v.4.0. Now, I have intermittent problems with applications that suddenly stop functioning correctly. This is usually preceded by getting the spinning beach. Today, iTunes just stopped working, ultimately forcing me to have to Force Quit the application. Then, once one app does it, if bad enough, other apps start to collapse as well. Now, even though it may seem like I Force Quit, the Dock still shows the App as still functioning. It won't force quit at all. Then if I try to relaunch the App, directly, The error I get is Error Code: -600. There is very little read about it for me to make any sense of it. I ran Virex [yes, up to date], which as usual, there is nothing to fret about there. Though, it has been a while since I de-fragged my drives. But, I can't imagine that would be the cause of the problem... or would it?
Update: I can repeat this intermittent problem using iTunes v. 7.1.1.
G4/450 with 768MB of RAM, Two Seagate 80GB HD's, with SCSI card with two SCSI drives. Running Mac OSX Tiger v.10.4.9.

On my System/Apps HD 80GB [Master] = 57GB of Free Space.
On my Second HD [Slave] = 27GB of Free Space
On My 3rd HD 17GB Internal SCSI = 811MB of Free Space
[this is where all my music is stashed]
On my 4th HD, 4GB Internal SCSI = 1.2GB of Free Space
OS9 HD/OS9 Apps.
Yes, all RAM is listed. I did some investigation, checked that as well. Then I ran a couple of utilities, iDefrag to see if the drive are in need of defragging, it looked like I should consider defragging. However, I ran Onyx, just clean out my caches before I CCClone to alternative drive and it told me "This Volume needs to be Repaired". So, I think I've got my answer.
If anything, thank you in advance for any advice you leave, I am going to start of OSX CD and see what's up.

Similar Messages

Error code -600 and all applications quiting unexpectedly

Hi all I need your help!?! I'm having a problem launching my programs. When I click or double click on a program, it will launch but will then immediately give an error saying "the application _________ quit unexpectedly." This is happening with all of the programs on my computer.
Second problems is with my files. I'm getting an error code -600 when opening up a file. That includes jpg. and doc.
Please Help

Hi,
2.5GB is dangerously low. I'd guess you have a 40GB drive, so you should try to keep at least 8-10GB free, which you can determine easily in the bottom of any Finder window. The maxed disc space could be causing problems to your system like sluggishness, but I doubt it is causing all your apps to quit unexpectedly. That is probably more related to some kind of directory corruption. So, what do you do? Usually when apps start crashing unexpectedly the first step is to delete the preference file for the offending app. The preference file look like this, apple.com.iphoto.plist. All the preference files are in the same pattern, it's only the name of the app that changes. You'll find them at <hard drive/library/preferences< or you can just search the individual app preferences in the search box of the Finder window. Try deleting one or two for offending apps and see if they still crash. Also, because your directory is a bit funky you should run a maintenance app like Onyx. Install it and run Maintenance. It should sort out the directory issues to get your machine running again. Try these and post back with your results.
I also noticed your profile states 10.4.1. You should update to 10.4.11.
Onyx - <a class="jive-link-external-small" href="http://">http://www.titanium.free.fr/pgs/english.html
Make sure you get the right version for your OS.
Good luck!

Error code 600 and 500 on autodiscover in Exchange 2010

Hi,
I have a problem on Exchange 2010 Autodiscover, the error code 600 and 500, Please see below message and please help to fix this error.
<?xml version="1.0" encoding="utf-8"
?>
<Autodiscover xmlns="http://schemas.microsoft.com/exchange/autodiscover/responseschema/2006">
<Response>
<Error Time="09:28:57.8739220" Id="2715916636">
<ErrorCode>600</ErrorCode>
<Message>Invalid Request</Message>
<DebugData />
</Error>
</Response>
</Autodiscover>
Thanks,
ShutMo

Hi,
The website https://host.abdomain.local/autodiscover/autodiscover.xml
Shows the following error:
<?xml version="1.0" encoding="utf-8" ?>
<Autodiscover xmlns= "http://schemas.micosoft.com/exchange/autodiscover/responseschema/2006">
<Response>
<Error Time="09:28:57.8739220" Id="2715916636">
<Errorcode>600</Errorcode>
<Message>Invalid Request</Message>
<DebugData/>
</Error>
</Response>
</Autodiscover>
Test Email Autoconfiguration
<
I have do "Test Email Autoconfiguration" and have the following log:
Guessmart POP: server pop3.aadomain.com, port = 110, initializing
Guessmart POP: server aadomain.com, port = 995, initializing
Guessmart POP: server pop3.aadomain.com, port = 110, ssl=Yes, tls=No, spa=No, starting
Guessmart POP: server aadomain.com, port = 110, initializing
Guessmart POP: server aadomain.com, port = 995, ssl=Yes, tls=No, spa=No, starting
Guessmart POP: server aadomain.com, port = 110, ssl=Yes, tls=No, spa=No, starting
Attempting URL https://host.abdomain.local/Autodiscover/Autodiscover.xml found through SCP
Autodiscover to https://host.abdomain.local/Autodiscover/Autodiscover.xml starting
GetLastError=0; httpStatus=500
Autodiscover request completed with http status code 500
Autodiscover to https://host.abdomain.local/Autodiscover/Autodiscover.xml failed (0x80004005)
Autodiscover to https://host.abdomain.local/Autodiscover/Autodiscover.xml starting
Guessmart IMAP: server mail.aadomain.com, port=143, ssl=Yes, tls=No, spa=No, failed (0x800CC4005)
Guessmart IMAP: server mail.aadomain.com, port=143, ssl=Yes, tls=No, spa=No, starting
Guessmart POP: server pop.aadomain.com, port = 110, ssl=Yes, tls=No, spa=No, failed (0x800CCC1A)
Guessmart IMAP: server imap.aadomain.com, port 143, ssl=Yes, tls=No, spa=No, failed (0x800CCC1A)
Guessmart IMAP: server imap.aadomain.com, port 143, ssl=Yes, tls=No, spa=No, starting
Guessmart POP: server pop.aadomain.com, port 110, ssl=Yes, tls=No, spa=Yes, starting
then I received another failed.
Please advise.
Thanks,
Shutmo

Unexpected Error Occurred (error code -600) after Leopard Installation

Installed Leopard for the second time.
Everything seems to work fine, but after opening and then closing Mail, I'm unable to open it via the dock. Tried to open by selecting from the applications menu, and get the following message:
The operation could not be completed.
An unexpected error occurred (error code -600)
Same thing with Backup, Parallels too.
Shutdown behavior is odd. From the apple icon, shutdown doesn't work, everything goes away on the desktop, then the spinning wheel (not beach ball), then nothing. Have to power off to quit, can't be good for the hardware.
Any suggestions, or am I doomed to a clean install and reinstalling all of my applications? Thankfully I have a drive backed up with SuperDuper with 10.4!
Thanks for the help.

OK, I've got ContentBarrier X4 installed and this was the cause of my error codes and it looks like several - if not all of my installation issues with Leopard.
Apparently, perhaps with Login KeyChain update, it wiped out the ContentBarrier administration name, and on launch, it was likely blocking the applications.
First, install the Login KeyChain update (see Apple software download page).
Reinstalled ContentBarrierX4 http://www.intego.com/services/updates.asp (make sure to select ContentBarrierX4).
Open ContentBarrierX4 - you'll have to sign in as the administer. You may have to go into Preferences > Accounts > to make sure that you've got admin rights.
Once you logged in, exit, then reboot.
For the first time since installing Leopard, I can shutdown without a hard power off.
Salvation...

Error Code -600 Proc Not Found

Getting the error while running FCP and DVD Studio Pro, also while running Excel and Word and recently while on AfterFX and Photoshop. I haven't a clue what "no eligible process with specified process serial number" or the definition of Error Code -600 could be pointing to.
The computer will intermittently freezes in these programs (each time running two) and then I won't even be able to get the computer to force quit or shut down from the pull down menu.
Recent tune-ups include tossing FCP.plist and caches folder from library.
I loaded in an Avid Xpress Pro 5.6.4. update very recently and also hooked up a loaner Lacie. Not running Avid however, decided to cut my project in FCP.
Maybe related, one of my Lacie's keeps cycling on and off. I ran Disc Utilities on it and a repair was made. It still keeps cycling on and off. At least I think it's the same drive. It does it so quickly and the icon and project stay in-tact that frankly not sure if it's the same drive or another.

The problem with your LaCie disk may be related. Try disconnecting it from your Mac to see if that helps. You should contact LaCie to find out what's wrong with that disk.

Keep getting "Error code 600" when trying to open itunes.Lost my tunes??:(

I left my computer on for a couple of days and had closed down itunes. when i tried to open it back up the " error code 600" came up and i cant get to my music. can anyone help me!

wmv is a Windows Media format. I don't know why Realplayer is coming into it since that deals primarily with Real format files and maybe a few generic formats.
You need
Free Flip4mac QuickTime player components - http://www.microsoft.com/windows/windowsmedia/player/wmcomponents.mspx
After installation a new Flip4Mac pane will appear in System Preferences. Make sure you set the boxes to ensure that it will play WMV files in Quicktime.
or play the files with VLC
VLC media player - http://www.videolan.org/vlc/ - general media player that plays just about anything.
While you're at it you might install:
Perian codecs for Quicktime - http://www.perian.org - plugins to add functionality to Quicktime for playing additional audio and video formats
Quicktime audio problems, Perian, VLC - http://discussions.apple.com/message.jspa?messageID=9013669 - read note about uninstalling prior DIVX support before installing Perian.
Perian doen't do WMV but it's handy to get many things to play in Quicktime.
Note, if these are protected WMV, nothing on a Mac will play those (unless you also have Windows installed).

Final Cut Constantly crashes, Plus error code -600 half the time

Please someone help. I have the newest and fastest Imac available and final cut studio 2, all of the software is up to date. I'm currently running tiger. What is wrong. I've had no problems in the past, and recently the problems keep coming up more and more. I can't even open my project for more than 2 minutes before it will jam up on me. I have to force quit the program, then half the time I'll get error code -600. So I'll have to restart the computer and try again. I have my media files on an external hard drive. I don't know what is wrong. Is it because I have all the files including the project files on the hard drive? Anyone have any suggestions? Should I re-install my final cut program or move all my files from my external hard drive to the one and only internal one. (defeats the purpose of only being able to use one hard drive though.)

I'm using standard DV files. I've seached and searched for answers to this problem, and no one has answered anyone yet, other than try to update your software. I forgot to mention that also this system will not restart, and has to be forced off by holding down the power button, and also it loses an entire day of work! Twice it has done this to me. I have backups set to every 10 minutes, I also saved the project on 2 seperate files, and on seperate hard drives. Both projects reverted back to an entire day missing, back up files and all. I never lost this much data and work with premiere. The only reason I switched is because my TV Station uses final cut pro, and everyone hates it. I'm starting to find out why..... Is there a number I can call, the forums don't seem to have any answers, neither does google.

7.1.1 - Not launching. Error code -600

Help! I recently upgraded itunes to 7.1.1 (as well as Mac OS to 10.4.9) and ever since Itunes has simply refused to open. When I try from the Dock it doesn't respond, but appears as "not responding" in the Force Quit menu. When launched from a finder window I get an "unexpected error" error code -600.
I have tried reinstalling both OS 10.4.9 and itunes 7.1.1.
Any ideas? I am at my wits end!

I took the advice of one of the other people on here and deleted the ~/user/library/cache folder. After a reboot this worked. i would move the folder to the desktop first and then reboot and re-try iTunes. I have not upgraded to 7.1.1 yet as i wanted some stability since I got 7.1 working.

"AN UNEXPECTED ERROR OCCURED (ERROR CODE -600)" HELP...

I was trying to open a FC EXPRESS HD and this message came up:
"THE OPERATION COULD NOT BE COMPLETED"
"An Unexpected Error Occured -ERROR CODE -600-.
If someone can help me. I'll appreciate.

It appears that the last time Final Cut Express was used, it didn't completely quit. Open the Activity Monitor in the /Applications/Utilities/ folder to force quit it if it shows up; if it doesn't, save your open documents in other applications and quit the loginwindow process. You may now be asked to log in again or be logged in automatically depending on how the computer is set.
(24809)

What does (error code -600) mean?

What does (error code -600) mean?
I received this code in a pop up window while trying to open iTunes from my Apps folder.

procNotFound
= -600, /*no eligible process with specified descriptor*/
Could be many things, we should start with this...
"Try Disk Utility
1. Insert the Mac OS X Install disc, then restart the computer while holding the C key.
2. When your computer finishes starting up from the disc, choose Disk Utility from the Installer menu at top of the screen. (In Mac OS X 10.4 or later, you must select your language first.)
*Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from the disc again to access Disk Utility.*
3. Click the First Aid tab.
4. Select your Mac OS X volume.
5. Click Repair Disk, (not Repair Permissions). Disk Utility checks and repairs the disk."
http://docs.info.apple.com/article.html?artnum=106214
Then try a Safe Boot, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, reboot when it completes.
(Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive.)
If perchance you can't find your install Disc, at least try it from the Safe Boot part onward.
Any change?

Oracle.jbo.NoDefException: JBO-29114 ADFContext is not setup to process messages for this exception. Use the exception stack trace and error code to investigate the root cause of this exception. Root cause error code is JBO-25058. Error message parameters

Dear Guru's,
I am not able to solve the above issue for last couple of days.
I am newbie to the webservice
My Issue...
I am using Jdeveloper 11.1.2.4.0 Release 2
1. Using Jdev I built one small Web Service with two methods.
        While testing the Webservice...
               I passed User Id as Parameter and it successfully return the values (user id, user name and description) from fnd_user table
2. I created another application to consume the web service i created.
               1. I added the webservice SOAP and added the method.
               2. Created a jsf page and drag and drop the parameter and return values to the jsf page.
3. While executing the created jsf page I received the error message as below
"oracle.jbo.NoDefException: JBO-29114 ADFContext is not setup to process messages for this exception. Use the exception stack trace and error code to investigate the root cause of this exception. Root cause error code is JBO-25058. Error message parameters are {0=Attribute, 1=UserName, 2=UserName}"
Even I know that this issue is repeated one in our forum, I was not able to solve this issue.
Can anybody help to solve this issue.
Thanks and Regards,
Durai S E

Dear Guru's,
I am not able to solve the above issue for last couple of days.
I am newbie to the webservice
My Issue...
I am using Jdeveloper 11.1.2.4.0 Release 2
1. Using Jdev I built one small Web Service with two methods.
        While testing the Webservice...
               I passed User Id as Parameter and it successfully return the values (user id, user name and description) from fnd_user table
2. I created another application to consume the web service i created.
               1. I added the webservice SOAP and added the method.
               2. Created a jsf page and drag and drop the parameter and return values to the jsf page.
3. While executing the created jsf page I received the error message as below
"oracle.jbo.NoDefException: JBO-29114 ADFContext is not setup to process messages for this exception. Use the exception stack trace and error code to investigate the root cause of this exception. Root cause error code is JBO-25058. Error message parameters are {0=Attribute, 1=UserName, 2=UserName}"
Even I know that this issue is repeated one in our forum, I was not able to solve this issue.
Can anybody help to solve this issue.
Thanks and Regards,
Durai S E

Creative Cloud Installation Failed Download Error - Error Type -7 and Error Code - 401

I subscribed to Creative Cloud in December 2012 and have been trying to install the applications, but the "Installation Failed" through the Adobe Application Manager. (see screenshot)
Here is a line from my log file:
01/08/13 11:08:48:346 | [WARN] | | ASU | PDApp | DownloadError | | | 6120 | Download Error has come with GDE Error type - -7 and error code - 401
I tried searching for the same error code in the "knowledge base" but couldn't locate any.
I am on a Windows 7 (x64) machine. I also have CS5.5 installed.
Anyone have this problem? Please help or point me in the right direction if you can. Thanks!

Thanks Romsinha,
   I tried the above steps, with no luck. I have admin rights on both laptop and desktop I'm trying to install to. I have updated my AAM on both machines with no issue (when using the direct link above). But when I click the 'Try' link to download an application, it shows the scrolling status bar for a few seconds, then "Installation Failed" 'Download error. Press Retry to try again or contact customer support. (-7)'   Retry only produces same results.
Both machines are running Win 7 Pro - SP1 64bit
     (laptop - 16 GB RAM & Core i7-2760QM 2.40 GHz processor)
     (desktop - 8 GB RAM & Xeon W3520 2.67GHz processor)
I am running in a corporate setting with I'm sure all sorts of Firewall protection etc...
I'm planning on asking for a CC membership, but wanted to check out the new features first....
Thanks!

I can't activate iTunes-Error Code 600

When I try to activate iTunes, the message on my screen mentions Error Code 600. I'm sure the problem was caused because I tried to import too many songs (200+) for a 1GB iPod Nano. While iTunes was converting the last song to the AAC format, it suddenly stopped. It's my fault, but I had assumed tht I would be warned when I got into dangerous territory. Anyway, how do I fix it until I buy a Nano with a much larger capacity. I will, because I'm having so much fun with the thing. I even go around wearing a headphone into which I plug the Nano, even though I'm 68 years old. Doesn't seem quite right for someone my age, but who cares? I like my music.
iMac DV (Special Edition) Mac OS X (10.3.9)
iMac DV (Special Edition) Mac OS X (10.3.9)
iMac DV (Special Edition) Mac OS X (10.3.9)

I guess this question wasn't interesting enough for anyone to bother answering. In any event, the problem cured itself, so close this case.

What is error code -600

I am working on Premiere cs6, using red raw. I edited for a while on my Mac Pro, wanted to give it a shot on my imac becaus eit could work with my thunderbolt, but the file cannot be opened because it says, Cannot open premisere cs6, error code -600.

There are a couple of similar posts on the Adobe web site, perhaps you need to contact Adobe support.

Error Code 600 Autodiscover

I am using Exchange server 2007 i am facing issue activesync,
my users are not able to emails from their smartphones
https://autodiscover.mydomain.com/autodiscover/autodiscover.xml
<?xml version="1.0" encoding="utf-8" ?>
- <Autodiscover xmlns="http://schemas.microsoft.com/exchange/autodiscover/responseschema/2006">
- <Response>
- <Error Time="12:31:17.3655146" Id="2053059689">
<ErrorCode>600</ErrorCode>
<Message>Invalid Request</Message>
<DebugData />
</Error>
</Response>
</Autodiscover>
https://mail.mydomain.com/autodiscover/autodiscover.xml
<?xml version="1.0" encoding="utf-8" ?>
- <Autodiscover xmlns="http://schemas.microsoft.com/exchange/autodiscover/responseschema/2006">
- <Response>
- <Error Time="12:31:19.5627343" Id="2053059689">
<ErrorCode>600</ErrorCode>
<Message>Invalid Request</Message>
<DebugData />
</Error>
</Response>
</Autodiscover>
[PS] C:\Users\Administrator.Mydomain\Desktop>Test-OutlookWebServices | fl
Id : 1003
Type : Information
Message : About to test AutoDiscover with the e-mail address Administrator@mydomain.
Id : 1007
Type : Information
Message : Testing server MAIL.mydomain with the published name https://mail.mydomain/EWS/Exchange.asmx & .
Id : 1019
Type : Information
Message : Found a valid AutoDiscover service connection point. The AutoDiscover URL on this object is https://mail.mydomain/autodiscover/autodiscover.xml.
Id : 1006
Type : Information
Message : The Autodiscover service was contacted at https://mail.mydomain/autodiscover/autodiscover.xml.
Id : 1016
Type : Success
Message : [EXCH]-Successfully contacted the AS service at https://mail.mydomain/EWS/Exchange.asmx. The elapsed time was 609 milliseconds.
Id : 1015
Type : Information
Message : [EXCH]-The OAB is not configured for this user.
Id : 1014
Type : Success
Message : [EXCH]-Successfully contacted the UM service at https://mail.mydomain/UnifiedMessaging/Service.asmx. The elapsed time was 181 milliseconds.
Id : 1016
Type : Information
Message : [EXPR]-The AS is not configured for this user.
Id : 1015
Type : Information
Message : [EXPR]-The OAB is not configured for this user.
Id : 1014
Type : Information
Message : [EXPR]-The UM is not configured for this user.
Id : 1017
Type : Success
Message : [EXPR]-Successfully contacted the RPC/HTTP service at https://mail.mydomain/Rpc. The elapsed time was 16 milliseconds.
Id : 1006
Type : Success
Message : The Autodiscover service was tested successfully.

Hi
Error code 600 is an expected result. that means the Autodiscover directory is working fine.
What error is exchange logging in the application event log regarding users trying to sync phones? Are they domain admins at all? Inheritable permissions ticket?

Intermittent behavior and Error Code: -600

Similar Messages

Maybe you are looking for