Intermittent cgi errors

Sun WS 6.1 / Windows Server 2003
We are intermittently seeing the following WS errors
[19/Dec/2004:08:32:41] failure ( 188): for host 66.161.77.163 trying to POST /cgi-bin/transact.pl, send-cgi reports: HTTP4046: error occurred while sending content to script (The pipe is being closed.)
[19/Dec/2004:08:32:41] failure ( 188): HTTP4087: cgi_send:cgi_start_exec C:\Perl\bin\perl.exe failed
Any ideas / suggestions?
Thanks.

Thank you for the suggestions.
The application interfacing to the NIDAQ card is the only application running on the PC. At times something minor may run, but it is reproducable with no other applications active.
It was also reproducable not long after restarting the system. Did not see any memory usage issues relating to the occurrences.
Alteration of the sampling rate is not an option, as we have been using these for the past decade plus for data collection. (Difference now being a re-write to upgrade to DAQmx from Traditional, so as to support Windows Vista PCs.)
We are trying new cables connecting between the source and 6110 board.
Kevin

Similar Messages

Intermittent Runtime error - pure virtual function call

I have an intermittent runtime error - pure virtual function call & don't know what cause it? Since It only occurs & crashes once awhile therefore it's difficult to trap it for debugging.I suspect it come from TestStand ActiveX API which I use in my User Interface Application project but I'm not really sure.
Does anyone experience this kind of problem when working with TestStand API ? If so any
suggestion? I have noticed in the TestStand API header file teapi.tlh contain many raw_.... function defined as pure virtual function. What are these raw_... function ? I don't think I use any of these function in my project.
Many thanks!

Danh,
I don't believe that your problem can be solved with the information you have provided unless someone else has experienced the same symtpoms which coincidentally have the same cause as in your case.
Is there any other information you can provide that can help localize the problem?
1) What is happening when the error occurs?
2) Does the error always occur in the same place?
3) Does it always occur with use of certain resources (e.g. DAQ, GPIB, VISA, printer)?
4) Does it occur when using the sequence editor?
5) Does it occur when using one of the shipping operator interfaces?
6) Does it occur only when using your operator interfaces?
7)Is it related to a specific sequence or any sequence?
8) Does it happen when you executed your sequence with/without a process model entr
y point (i.e. Execute>>Test UUTs, Execute>>Singal Pass or Execute>>Run MainSequence)?
9) How often does it happen?
10) What version of TestStand are you using?
11) With what language (include versions) are you programming your code modules?
12) With what language (include versions) are you programming your operator interface?
13) Is there any error code reported with this error message?
14) Is this error reported in a TS run-time error dialog or is it reported directly 1by the operating system?
15) Have you searched the web for related errors? For example, the following link describes a particular programming mistake that can lead to this error
http://support.microsoft.com/support/kb/articles/Q125/7/49.asp
By investigating answers to the above questions you may be able to narrow the cause of this error, which might allow you or others to help solve the problem.

Reports 6.0 CGI error on NT4.0

I am having trouble running a Reports 6.0 report via my web
browser. I have a simple report that runs fine on my desktop.
I have RWMTS60 (multi-tier server) running as an NT service. I
have RWCGI60 in my web server's /cgi-bin directory. I have
environment variables REPORTS60_WEBLOC,
REPORTS60_WEBLOC_TRANSLATED, and REPORTS60_PATH set.
The HTTP command string that I am using is as follows:
http://myhost.com/cgi-
bin/rwcgi60.exe?server=repserver+report=reports+userid=website/su
pport@odbc:LocalServer:software_web_site+destype=cache+desformat=
HTML+paramform=YES
I keep getting the following CGI error:
"The specified CGI application misbehaved by not returning a
complete set of HTTP headers. The headers it did return are:".
I think I probably didn't prepare my report correctly to output
HTML files... but I can't find any help on how to deploy forms
over the web.... Can anyone help me?
Thanks in advance,
Keith
null

Hi,
I hit the same problem today before submitting my problem I did a search, then I found the above.
Since it is very old problem and no body responded for the above I request Oracle Reports Group for a solution.
Thanks in advance,
NVS

RE: CGI Error

Hi All,
Can any one tell me What is these CGI Errors means
1. cgi_init reports: HTTP4047: could not initialize CGI subsystem (Cgistub path ../private/Cgistub), err Cgistub is marked as set user ID on execute and its directory is accessible by other user for host 129.146.11.110 trying to GET /ula/ula.cgi,
2. cgi_start_exec reports: HTTP4066: cannot initialize CGI exec subsystem

vr229233 wrote:
Hi All,
Can any one tell me What is these CGI Errors means
1. cgi_init reports: HTTP4047: could not initialize CGI subsystem (Cgistub path ../private/Cgistub), err Cgistub is marked as set user ID on execute and its directory is accessible by other user for host 129.146.11.110 trying to GET /ula/ula.cgi,
Check the doc - [Developer's Guide|http://docs.sun.com/app/docs/doc/820-6602/abwbw?l=en&a=view] . The permissions of private directory should be set to 500.

Intermittent of error "ORA-12203: TNS:unable to connect to destination"

Hi,
One of my application (run 24 hours each day) face intermittent of error "ORA-12203: TNS:unable to connect to destination", any one face the same issue ? any solution for this ? The error may occur weekly, some time monthly, occur randomly.
My Oracle is 8i. Application and 8i run on different SUN machines.
Checked with my network engr and db admin, network traffic was not congested and db was not overloaded at the time of this error. CPU and memory also not overloaded.
regards,
johnvun98

This error generally occurs when you listener at server is not working properly or at client you sqlnet.ora,tnsnames.ora (if using local names) file is not configured properly check both the files

Wierd cgi error when using WebServer 6.0

I just installed Webserver 6.0 and migrated a server instance from 4.1 to 6.0. Everything worked fine..the server starts correctly. But the images do not display and I get the following error in the logs
[19/Jul/2005:11:32:11] warning (18534): for host 151.193.213.24 trying to GET /images/globalnav/rt_grey_bar.gif, cgi_start_exec reports: cannot find CGI program
/opt/netscape/server6/docs/images/global
nav/rt_grey_bar.gif (File not found).
the file is there..but why the cgi error?..anyone had this issue before?
Thanks for any pointers.

We do not offer a JDBC driver for Linux in version 5.1. In version 6.0,we
do offer a type 4 driver for Linux.
In version 5.1, I suggest trying the platform independent type 4 JDBC driver
available for free from Oracle. It is supported (as is any JDBC driver)
with WebLogic Server. To download it:
Go to http://www.oracle.com and select the "Download" option.
From the resulting page, use the "Select Utility or Driver" dropdown to
select Oracle JDBC drivers
From the resulting page, scroll down a little (since SQLJ stuff appears at
the top).
Or, to go directly there:
http://technet.oracle.com/software/tech/java/sqlj_jdbc/software_index.htm
Thanks,
Michael
Michael Girdley, BEA Systems Inc
Learning WebLogic? Buy the book.
http://www.learnweblogic.com/
"Michael W. Warren, Sr." <[email protected]> wrote in message
news:[email protected]..
I have installed WebLogic 6.0 on Solaris platform and verified that the
server comes up
and that I can connect to it via Netscape. Next step was to verify
installation of WebLogic
jDriver for Oracle. When I run the following:
java utils.dbping ORACLE scott tiger
I get the following error:
Starting Loading jDriver/Oracle .....
Error encountered:
java.sql.SQLException: System.loadLibrary threw
java.lang.UnsatisfiedLinkError
with the message
'/ldatae/bea/wlserver6.0/lib/solaris/oci816_8/libweblogicoci37.so:
ld.so.1: /ldatae/bea/jdk130/jre/bin/../bin/sparc/native_threads/java:
fatal: libgen.so.1: open failed: No such file or directory'.
at
weblogic.jdbcbase.oci.Driver.loadLibraryIfNeeded(Driver.java:202)
at weblogic.jdbcbase.oci.Driver.connect(Driver.java:57)
at java.sql.DriverManager.getConnection(DriverManager.java:517)
at java.sql.DriverManager.getConnection(DriverManager.java:146)
at utils.dbping.main(dbping.java:182)
Anyone seen this? Help!!!
Thanks in advance
Mike Warren, Sr.
[email protected]

Provider-Hosted app intermittent 401 error

Hi All,
I've a PH high trust app which is working fine, but at times
(not always) I'm getting 401 un-authorzed error. This is very intermittent error occurs when the app trys to access sharepoint. when the user refreshes the page its working fine.
I've digged ULS log but couldn't find anything useful. However in event viewer found the below error.. I'm totally out of clues why its occurring only at times. Any help is appreciated. Thanks!
Event code: 3005
Event message: An unhandled exception has occurred.
Event time: 1/5/2015 8:39:08 AM
Event time (UTC): 1/5/2015 1:39:08 PM
Event ID: 26b14be284ca4488abb0a5bba127c4c1
Event sequence: 28
Event occurrence: 1
Event detail code: 0
Application information:
    Application domain: /LM/W3SVC/2/ROOT-1-130649382841483100
    Trust level: Full
    Application Virtual Path: /
    Application Path: C:\TestWeb\
    Machine name: APPSERVER
Process information:
    Process ID: 3408
    Process name: w3wp.exe
    Account name: Domain\ServiceAccount
Exception information:
    Exception type: WebException
    Exception message: The remote server returned an error: (401) Unauthorized.
   at System.Net.HttpWebRequest.GetResponse()
   at Microsoft.SharePoint.Client.SPWebRequestExecutor.Execute()
   at Microsoft.SharePoint.Client.ClientRequest.ExecuteQueryToServer(ChunkStringBuilder sb)
   at App.Pages.WebForm1.Page_Load(Object sender, EventArgs e)
   at System.Web.UI.Control.LoadRecursive()
   at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)
Request information:
    Request URL: https://appsSite.domain.com/Pages/DisplayPage.aspx?a=EU/gibbs/35&SPHostUrl=http://SPSite.domain.com/sites/TestSite
    Request path: /Pages/DisplayPage.aspx
    User host address: 10.x.x.x
    User: Domain\User
    Is authenticated: True
    Authentication Type: Negotiate
    Thread account name: Domain\ServiceAccount
Thread information:
    Thread ID: 14
    Thread account name: Domain\ServiceAccount
    Is impersonating: False
    Stack trace:    at System.Net.HttpWebRequest.GetResponse()
   at Microsoft.SharePoint.Client.SPWebRequestExecutor.Execute()
   at Microsoft.SharePoint.Client.ClientRequest.ExecuteQueryToServer(ChunkStringBuilder sb)
   at APP.Pages.WebForm1.Page_Load(Object sender, EventArgs e)
   at System.Web.UI.Control.LoadRecursive()
   at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)
Custom event details:

Hi,
According to your post, my understanding is that Provider-Hosted app get intermittent 401 error.
If you use IssuerId in provider-hosted application web.config, please make it a lowercase Guid string.
You need to make sure that the app certificate is added to the trusted certificate store.
In addition, you can turn off the HTTPS using PowerShell.
More information:
http://www.jamestsai.net/Blog/post/SharePoint-Provider-Hosted-App-401-Unauthorized-error-on-clientContextExecuteQuery().aspx
http://srichallagolla.blogspot.com/2013/01/sharepoint-2013-provider-hosted-high.html
Best Regards,
Linda Li
Linda Li
TechNet Community Support

Intermittent 200010 errors

Using the DAQmx C++ interface (version 8.7.1f3) for a S series NI PCI-6110 board, I am recieveing intermittent 200010 error messages when doing a DAQmxReadBinaryI16 call. (200010 is DAQmxWarningStoppedBeforeDone)
We are using the device to collect 3100 points of data off 4 separately channels. The data collection is a triggered start and then externally clocked in.
The data is collected at a variety of frequencies from 128 Hz to 1/2 Hz.
We are examining the electronics and other aspects, but the NI DAQmx interface code is new to the system (after upgrading from the Traditional DAQ legacy code a year ago). So the code here is suspect as well.
I have attached the source code (some area removed to simplify).
Attachments:
NIAcqLib200010Error.cpp ‏6 KB

Thank you for the suggestions.
The application interfacing to the NIDAQ card is the only application running on the PC. At times something minor may run, but it is reproducable with no other applications active.
It was also reproducable not long after restarting the system. Did not see any memory usage issues relating to the occurrences.
Alteration of the sampling rate is not an option, as we have been using these for the past decade plus for data collection. (Difference now being a re-write to upgrade to DAQmx from Traditional, so as to support Windows Vista PCs.)
We are trying new cables connecting between the source and 6110 board.
Kevin

Intermittent 403 Errors

I'm getting intermittent 403 errors with Apache. I'm seeing the following in my apache error log:
modencconvert: entered
modencconvert: trying
modencconvert: converted
config_merge: entered
merged: enable_function == 2
merged: strip_msaccount == 2
merged: server_encoding == (null)
Unfortunately, that's about it. I Googled the errors and I'm coming up with nothing. Any help would be GREATLY appreciated!

Hi jonjames,
When did you met this error? Or which opertations did you do when you met this error?
From the first section error, it seems to be about user profile service, please make sure user profile service is running correctly.
And for the second section error, it seems that a user cannot access /personal/<domainuser>/Documents/Forms/All.aspx, please check whether the MySite is the user's MySite, and make sure the user has at least read permission for the MySite's Document
library.
In addition, if this issue still exists, please provide a screenshot about this error in SharePoint UI.
Best Regards,
Wendy
TechNet Community Support
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected]

IC intermittent SAPSQL_ARRAY_INSERT_DUPREC error after changing business partner

Hello,
after upgrading from CRM5 to CRM7 (Service for Employee), our Interaction Centre users started getting intermittent SAPSQL_ARRAY_INSERT_DUPREC screen dumps when clicking on the 'Save' button after having changed a partner number in the Partners Table of a Service Ticket.
On encountering one of these screen dumps, the user then has to close their IC session and then restart it - after which it is then possible to successfully 'Save' the same change to the same business partner on the same Service Ticket.
I have not been able to reproduce this error due to its intermittent nature.
Details of the source code extract from the ST22 dump is given below.
Has anyone else encountered such an issue themselves?
thanks,
Martin
Category ABAP Programming Error
Runtime Errors SAPSQL_ARRAY_INSERT_DUPREC
Except. CX_SY_OPEN_SQL_DB
ABAP Program SAPLCOM_PARTNER_DU
Application Component CRM-BF-PD
Date and Time 20.08.2014 11:15:25
Line SourceCde
41 * data definitions
42 DATA: BEGIN OF ls_attribute_record_to_use,
43 partner_guid TYPE crmt_partner_guid,
44 values TYPE text255. "has to be as long as the longest
45 "attribute structure
46 DATA: END OF ls_attribute_record_to_use.
47
48 DATA: lt_attribute_records_to_use LIKE SORTED TABLE OF
49 ls_attribute_record_to_use WITH UNIQUE KEY partner_guid,
50
51 lv_tablename TYPE tabname,
52 ls_attribute_record TYPE crmt_partner_attr_du,
53 lv_name TYPE char64.
54
55 FIELD-SYMBOLS: <values> TYPE ANY,
56 <address> TYPE crmt_partner_address,
57 <fs_insert_record> TYPE crmd_partner,
58 <fs_addr_ref_data> TYPE crmt_partner_address_reference.
59
60 FIELD-SYMBOLS: <wa_to_proceed> TYPE ANY,
61 <table_to_proceed> TYPE ANY TABLE.
62
63 DATA: wa_to_proceed TYPE REF TO data.
64 DATA: lt_wa_table TYPE REF TO data.
65
66 *** MAINTAIN PARTNER RECORDS *******************************************
67
68 *** records to insert
69 IF NOT it_partner_records_to_insert IS INITIAL.
70
>>>>> INSERT crmd_partner FROM TABLE it_partner_records_to_insert.
72 IF sy-subrc NE 0.
73 MESSAGE a002(com_partner) WITH gc_object_name_partner.
74 ENDIF.
75
76 ENDIF.
77
78 *** records to delete
79 IF NOT it_partner_records_to_delete IS INITIAL.
80 DELETE crmd_partner FROM TABLE it_partner_records_to_delete.
81 IF sy-subrc NE 0.
82 MESSAGE a002(com_partner) WITH gc_object_name_partner.
83 ENDIF.

Hello Atul,
thanks for your message. I have had a look at the SAP notes that you have pointed me to, however they unfortunately do not relate to the functionality where we are encountering this problem:
1914117 - Relates to Sales (not Service {Employee})
1823316 - This error occurs in the wrong FM (BUR_BUPR_UPDATE) rather than FM COM_PARTNER_UPDATE_DU.
1809361 - Relevant for the SAP GUI transaction, 'BP', not the Interaction Centre which iswhere this error is occuring.
SAP have not been able to help because of its intermittent nature, it is not possible to create this error on demand, and as I am working on a secure site SAP cannot open a remote connection.
thanks,
Martin

Wls 10.0 - intermittent 401 errors

I have a simple HelloWorld servlet that is configured to use CLIENT-CERT as the authentication mechanism.
I am attempting to deploy this to a WLS 10.0 instance (though the problem I'm seeing also occurs under 9.2)
When I access the servlet once from my web browser everything works fine, the 2-way SSL handshake takes place and I get the output from my servlet.
However, if I attempt to access the servlet from multiple tabs concurrently, I get 401 errors intermittently. I can pick any one of the tabs that has a 401 error, hit 'reload' and get the correct output from the servlet.
I'm concluding that this problem shows up when too many concurrent authentication attempts are made I get the 401 errors.
This problem disappears if I remove the <security-contraint> section from the web.xml. This leads to the following questions:
1) If the <security-constraint> configures the servlet to allow any authenticated user (i.e the role specified maps to <principal-name>users</principal-name> in weblogic.xml) AND my WebLogic server is configured to require client certificates (and only listen on the SSL port), is the <security-constraint> serving any purpose?
2) How do I go about debugging this? Is this some sort of thread/resource issue that can be tweaked through WebLogic server settings somewhere?
Thanks in advance,
Bruce

Probably too late for an answer but I try,
We are not able to build our J2EE 1.4 application with weblo 10, we have to build them with weblo 8 which contains the xdoclet. then we deploy it in WL10. then sometimes we have to fix some build constraints that WL10 doesn't allow anymore.

Airport intermittent connect error

I have a macbook running 10.4.11 with built-in airport. I am having an intermittent problem connecting to my home airport extreme network. When I select my home network, I get an popup screen that says there was an error connecting to the network. Here are the facts:
-home network is running other wireless computers and TIVOs with no problems. I was having the same problems with a airport snow that I replaced with my current airport extreme.
-Macbook works on other networks with no problems. Even when I can't connect with my home network, I can connect with my neighbors network.
-When I have difficulty connecting to my home network, some strange network names appear above my home network name on the airport pull down list on the macbook, sometime two different ones. The names are different every time and look like this: 05B401955766
-I have deleted the airport preferences, but a new file has not been created.
-Sometimes I can get it to connect when I turn off the macbook airport and then turning it back on.
-Usually the problems with connecting occur when I wake the computer up.
-I have deleted the password for the wireless network from my keychain and reentered it on the next login.
Thanks for any ideas you can come up with to help out.

MESSAGE: "There was error joining the AirPort network "padilla home".

CGI Errors with different browsers

I developed a form on a website
http://www.brianspride.com/form.html
and the form submits fine in Safari, but displays the error below
in Firefox and IE. I looked on hundreds of web sites and was hoping
Adobe would have a posting, but I found nothing. Any help would be
much appreciated. I am a graphic designer with limited CGI
know-how.
Is there something that needs to be changed in the HTML or in
the .pl file? I created the form in Dreamweaver and didn't know
there would have to be additional programming. Any thoughts?
Error: Bad Header Fields
The header fields, which include recipient, email, realname
and subject were filled in with invalid values. You may not include
any newline characters in these parameters.

Actually, that's not what would be causing the problem. We'd
need to see
the section of the script that is processing the form -
action="/cgi-sys/formmail.pl"
to see what might be happening.
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
==================
"QADesign" <[email protected]> wrote in
message
news:[email protected]...
> Thanks! Here it is:
>
> <form action="/cgi-sys/formmail.pl" method="post"
enctype="text/plain"
> name="bid" target="_top" id="bid">
> <input name="recipient" type="hidden" id="recipient"
> value="[email protected]" />
>
>
>
> <input name="subject" type="hidden" id="subject"
value="Bid
> Submission
> for BriansPride" />
> <input type=hidden name="redirect"
> value="
http://www.brianspride.com/thankyou.html">
> <label>First Name:
>
> <input type="text" name="First Name" id="First Name"
/>
> </label>
> <br /><br />
> <label>Last Name:
>
> <input type="text" name="Last Name" id="Last Name"
/>
> </label>
> <br /><br />
>
>
<label>E-mail:
>
> <input type="text" name="E-mail" id="E-mail" />
> </label>
> <br /><br />
> <h1>Address:</h1>
>
> <label>Street:
>
             &n
>
bsp;
> <input type="text" name="Street" id="Street" />
> </label>
> <br /><br />
>
>
<label>Town/City:          &nb
> sp;
> <input type="text" name="City" id="City" />
> </label>
> <br /><br />
>
>
<label>State:           &
>
nbsp;
> <input type="text" name="State" id="State" />
> </label>
> <br /><br />
> <label>Zip
>
Code:            &nb
> sp;
> <input type="text" name="Zip Code" id="Zip Code"
/>
> </label>
> <br /><br />
> <label>
> <input type="radio" name="Auction Items"
value="radio" id="Auction
> Items_0" />
> 2 Tickets Eagles/Giants</label>
> <br />
> <label>
> <input type="radio" name="Auction Items"
value="radio" id="Auction
> Items_1" />
> 2 Flyers Tickets</label>
> <br /><br />
> <label>Bidding Amount:
> <input type="text" name="Bidding Amount" id="Bidding
Amount" />
> </label>
> <br /><br />
> <label>
> <input type="submit" name="Submit" id="Submit"
value="Submit"/>
> </label>
> <br />
> </p>
> </form>
>
>

Intermittent oracle errors with case-insensitive searches

Hi
I have a table with several columns, two of them are indexed with oracle text.
When I ask queries containing "CONTAINS"-clauses against these columns everything works great. However I have a few other columns in table that I want to run case-insensitive comparisons with.
So I enable case-insensitivity:
ALTER SESSION SET NLS_COMP=LINGUISTIC
ALTER SESSION SET NLS_SORT=BINARY_CI
Now I suddenly start getting intermittent errors.
When I call a query:
SELECT
FROM
article_table at
WHERE
CONTAINS(searchfield , '%MEAT%') > 0
Sometimes it works, but sometimes I get:
ERROR
ORA-29902: ett fel inträffade när rutinen ODCIIndexStart() kördes
ORA-20000: Oracle Text error:
DRG-00100: internal error, arguments : [50935],[drpn.c],[1051],[],[]
DRG-00100: internal error, arguments : [50935],[drpnw.c],[601],[],[]
DRG-00100: internal error, arguments : [51002],[drwa.c],[594],[],[]
DRG-00100: internal error, arguments : [51028],[drwaw.c],[297],[0],[%MEAT%]
DRG-00100: internal error, arguments : [50401],[dreb.c],[1033],[],[]
ORA-00600: intern felkod, argument: [qernsRowP], [1], [], [], [], [], [], []
Anyone knows what is going on? Is this bug? Is there a fox for it?
Thanks for any help anyone can provide.
/Kjell

Clearly that's a bug. Unless anyone here recognizes it and can point you to the bug/patch number I would strongly recomend you to take it to oracle support.
Incidently, doing a search for '%MEAT%' is usually a bad idea. Leading wildcards will disable the use of the index on the $I table, so unless you're using the SUBSTRING_INDEX option such searches will usually perform very badly. They shouldn't cause "internal errors", of course.

Intermittent access errors 53/5400/5401 - SCCM 2012 r2 Outbox to Inboxes copy - MP File Dispatch Manager

Hi,
We're having intermittent problems where one of our management points, we'll call it serverB tries to copy files from its outbox to our primary site server's (ServerA) inboxes folder. It usually seems to work, but also fairly often throws a message
ID 5400 - can not connect (Error 53, the network path was not found) , followed by 5401 - cannot copy files. It's not enough to put the SMS_MP_FILE_DISPATCH_MANAGER component in an error status, but it does show a warning. sometimes it will fail
on one outbox item, sometimes several. the status of the component changes to "Online" shortly after it fails, and sometimes to "OK" around midnight that same night. and sometimes to "Online" before it runs again whether
it fails or not.
attempting to manually access this inboxes folder on the primary site server as a local admin or as the domain service account for SCCM results in access denied - the usual UAC block where if you elevate the process it works fine, but non-elevated
it prompts for admin rights. I don't think it's related, because it's been running fine for several months but wanted to mention that. Does this seem like a network issue or file/folder access? Are there other SCCM logs I can look at for
more details?

Hi,
Please check the blog below that there are some wrong security settings on some inboxes.
https://koenraadrens.wordpress.com/2013/01/18/sms_mp_file_dispatch_manager-errors-after-installing-configuration-manager-2012-sp1/
Note:
Microsoft provides third-party contact information to help you find technical support. This contact information may change without notice. Microsoft does not guarantee the accuracy of this third-party contact information.
Best Regards,
Joyce
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]

Intermittent cgi errors

Similar Messages

Maybe you are looking for