Intermittent Connection Error

Hi Cleaver Folks
I have a strange problem. At home, my parents and my inlaws I have no problems connecting to the various wifi routers. However at work I cannot connect to either of the wifi routers we are running. The networks show up connect, then disconnect, disappear totally and then reappear connect and do the same before totally disappearing all together? N e ideas? I know there is no problem with the Mac itself. The two routers are Netgear. To make matters worse all the PC's in the building can connect to both with zero problems. Is there an Apple Setting i'm missing or have our IT department not activated something to allow me through?

You must of course set the exact correct type of encryption, exact same network name and password. It's probably unlikely that they're using WPA2 as you're probably used to using. Try WPA, if that's not it, then go down to WEP.
Actually, it's probably just easier to ask someone who would know the answer to which type of encryption is being used.

Similar Messages

Airport intermittent connect error

I have a macbook running 10.4.11 with built-in airport. I am having an intermittent problem connecting to my home airport extreme network. When I select my home network, I get an popup screen that says there was an error connecting to the network. Here are the facts:
-home network is running other wireless computers and TIVOs with no problems. I was having the same problems with a airport snow that I replaced with my current airport extreme.
-Macbook works on other networks with no problems. Even when I can't connect with my home network, I can connect with my neighbors network.
-When I have difficulty connecting to my home network, some strange network names appear above my home network name on the airport pull down list on the macbook, sometime two different ones. The names are different every time and look like this: 05B401955766
-I have deleted the airport preferences, but a new file has not been created.
-Sometimes I can get it to connect when I turn off the macbook airport and then turning it back on.
-Usually the problems with connecting occur when I wake the computer up.
-I have deleted the password for the wireless network from my keychain and reentered it on the next login.
Thanks for any ideas you can come up with to help out.

MESSAGE: "There was error joining the AirPort network "padilla home".

Intermittent of error "ORA-12203: TNS:unable to connect to destination"

Hi,
One of my application (run 24 hours each day) face intermittent of error "ORA-12203: TNS:unable to connect to destination", any one face the same issue ? any solution for this ? The error may occur weekly, some time monthly, occur randomly.
My Oracle is 8i. Application and 8i run on different SUN machines.
Checked with my network engr and db admin, network traffic was not congested and db was not overloaded at the time of this error. CPU and memory also not overloaded.
regards,
johnvun98

This error generally occurs when you listener at server is not working properly or at client you sqlnet.ora,tnsnames.ora (if using local names) file is not configured properly check both the files

DNS errors + Intermittent Connectivity Help

For the last 5 days my internet has had intermittent connectivity. It is throughout my entire home network of internet access. We have not had any storms or changes to our settings or connections for it to be anything on our network. This issue also happened in the past. Then after X amount of days, it was magically be fixed. When the internet does work, there are no issues and it works fine, which again makes me think it is not on our end and it is Verizon's fault.
When I check the system log of my modem, it has a TON of "DNS request timeouts" or errors saying some other stuff about DNS issues.
My modem/router is Actiontec GT704-WG, I also don't use Wireless internet which is usually related to intermittent connections but that shouldn't be the case.
So is this an issue with Verizon's lines/ servers / connections? Or is it actually something wrong with my network?

It is probably a network issue, but the first step is usually to rule out the local equipment, so restarting the PC and the modem/router is a good starting point.
I have yet to come to encounter an ISP that competently manages their DNS equipment, and you will find a number of Verizon Techs who post here who will tell you to change from the Verizon automatically assigned DNS's to Open DNS.
visit www.opendns.com for detail instructions on how to do so. I changed to open DNS months ago.
So if you still have a problem after you have rebooted the equipment, and changed to OpenDNS, it is almost certainly a Verizon network issue, although convincing Verizon of that can be quite challenging.
Good luck

Fatal NI connect error 12170 and TNS-12535: TNS:operation timed out

We are getting intermittently following error.
TNS for Solaris: Version 10.2.0.3.0 - Production
Oracle Bequeath NT Protocol Adapter for Solaris: Version 10.2.0.3.0 - Production
TCP/IP NT Protocol Adapter for Solaris: Version 10.2.0.3.0 - Production
Time: 26-FEB-2008 07:17:25
Tracing not turned on.
Tns error struct:
ns main err code: 12535
TNS-12535: TNS:operation timed out
ns secondary err code: 12606
nt main err code: 0
nt secondary err code: 0
nt OS err code: 0
sql net ora file
NAMES.DIRECTORY_PATH= (TNSNAMES)
# NAMES.DEFAULT_DOMAIN = world
SQLNET.EXPIRE_TIME = 10
Out of 10,000 sucessful connections, some 10 connections are getting the 12170 and 12535 error. It is due to firewall connection time out ?
Appreciate advanced help
Prasad

Hi ,
Even I am facing similar issue. Please let me know if you have any resolutions for this

Download Server Connection Error

I tried updating my desktop skype because it was being cruddy, but the updates wouldn't go through because of a "download server connection error." My friend suggested that I delete my old skype and reinstall it, but when I tried to do so, the same message popped up and offered a link to a supposed "solution." But when I clicked on it, it simply sent me back to the original page in a never ending loop of downloading failures. I looked up what to do, and it seems I'm not the only one with this problem. Others seemed to been having success when sent this link http://download.skype.com/msi/SkypeSetup_7.4.0.102.msi however, went to check it out, the page was deleted so I had no options. So now I'm stuck, and unable to download any program due to this error, which I have no idea what it is or how it's caused. If I could have some assistance ASAP, that would be great! I want my desktop skype back so I can share screens and see my friend while using my desktop. Thank you for your time, Chrissy.

On my computer and Internet connection it says it will download the file in 18 seconds but it downloads it in about 8 seconds. I downloaded 3 copies in less than 30 seconds all over wireless. If you are having issues downloading it you probably have a slow or intermittent Internet connection. If you are going wireless try to move closer to your wireless router or go wired.

Intermittent access errors 53/5400/5401 - SCCM 2012 r2 Outbox to Inboxes copy - MP File Dispatch Manager

Hi,
We're having intermittent problems where one of our management points, we'll call it serverB tries to copy files from its outbox to our primary site server's (ServerA) inboxes folder. It usually seems to work, but also fairly often throws a message
ID 5400 - can not connect (Error 53, the network path was not found) , followed by 5401 - cannot copy files. It's not enough to put the SMS_MP_FILE_DISPATCH_MANAGER component in an error status, but it does show a warning. sometimes it will fail
on one outbox item, sometimes several. the status of the component changes to "Online" shortly after it fails, and sometimes to "OK" around midnight that same night. and sometimes to "Online" before it runs again whether
it fails or not.
attempting to manually access this inboxes folder on the primary site server as a local admin or as the domain service account for SCCM results in access denied - the usual UAC block where if you elevate the process it works fine, but non-elevated
it prompts for admin rights. I don't think it's related, because it's been running fine for several months but wanted to mention that. Does this seem like a network issue or file/folder access? Are there other SCCM logs I can look at for
more details?

Hi,
Please check the blog below that there are some wrong security settings on some inboxes.
https://koenraadrens.wordpress.com/2013/01/18/sms_mp_file_dispatch_manager-errors-after-installing-configuration-manager-2012-sp1/
Note:
Microsoft provides third-party contact information to help you find technical support. This contact information may change without notice. Microsoft does not guarantee the accuracy of this third-party contact information.
Best Regards,
Joyce
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]

Client ADI App File Server Connection error when trying to publish report.

Our users are having intermittent problems when trying to publish reports from their Client ADI process to Excel. They are receiving the error:
"An error occurred while attempting to establish an Applications File Server Connection. There may be a network configuration problem, or the TNS listener may not be running. Nodename:"
The problem is this issue will be present for a user and then for no reason that user will be able to publish reports again. Or several users will get this error and one user will be able to publish reports. The only consistency is when it errors out they get this message. The listener appears to be up and running as well.
We are running 11.5.10.2 and ADI version: 7.2.12
Any helps or tips would be appreciated.

"An error occurred while attempting to establish an Applications File Server Connection. There may be a network configuration problem, or the TNS listener may not be running. Nodename:"Please see these MOS docs.
ADI: Troubleshooting Connection Problems with ADI/GLDI [ID 70669.1]
Troubleshooting the "Error Occurred While Attempting to Establish an Applications File Server Connection" [ID 117012.1]
How To Validate FNDFS For Applications Desktop Integrator - ADI [ID 364796.1]
ADI: Unable To View Reports In ADI [ID 1018797.102]
Can not View Reports Submitted through ADI/Request Center [ID 135128.1]
ADI RRA:Prefix When Connecting to Server with Muiltple Apps Instances [ID 201492.1]
ADI Application File Server Connection Error [ID 146220.1]
Thanks,
Hussein

Intermittent 200010 errors

Using the DAQmx C++ interface (version 8.7.1f3) for a S series NI PCI-6110 board, I am recieveing intermittent 200010 error messages when doing a DAQmxReadBinaryI16 call. (200010 is DAQmxWarningStoppedBeforeDone)
We are using the device to collect 3100 points of data off 4 separately channels. The data collection is a triggered start and then externally clocked in.
The data is collected at a variety of frequencies from 128 Hz to 1/2 Hz.
We are examining the electronics and other aspects, but the NI DAQmx interface code is new to the system (after upgrading from the Traditional DAQ legacy code a year ago). So the code here is suspect as well.
I have attached the source code (some area removed to simplify).
Attachments:
NIAcqLib200010Error.cpp ‏6 KB

Thank you for the suggestions.
The application interfacing to the NIDAQ card is the only application running on the PC. At times something minor may run, but it is reproducable with no other applications active.
It was also reproducable not long after restarting the system. Did not see any memory usage issues relating to the occurrences.
Alteration of the sampling rate is not an option, as we have been using these for the past decade plus for data collection. (Difference now being a re-write to upgrade to DAQmx from Traditional, so as to support Windows Vista PCs.)
We are trying new cables connecting between the source and 6110 board.
Kevin

PC Connectivity error - Nokia 6288

Hi,
I am not able to connect my phone to the PC. I have done it before in my laptop and it had worked fine. But wen i am trying in on my PC, evrytime i conect the Phone to the PC with the Data cable, i get an error msg saying that there was a error installing the hardware, the name either exists or something like that.
Please advice.
Phone model is 6288.
Thanks
Pauline

I have had my PC and phone connection through USB and have been advised that either my phone has a intermittent connection or that my USB (Supplied by Nokia) is defectiv
What is my recourse, I have spent a substantial amount or my personnal monies to resolve what I believe was and still is an inherent problem between my Phone.USB connector and my PC.
I have however been able to dianose that he error is not my PC and not my USB as a colleague of mine with the same phone Nokia has downloaded Photo images off my phone on to my PC
I have been a regular user of Motorola for many years and was advised after moving to Spain that I undertake a Nokia option through contract network for myself, my wife and daughter.
I am extremely dissapointed and respectfully request your advise and course of progress to resolve my ongoind dillema.
I have been attempting to download photo images off m phone now for 3 months to no avail
Please address this customer concern with the utmost of urgency as if not I shall withdraw 3 contract phones away from Vodaphone and change all our phones to an alternative choice other than Nokia.
Your Dissappointedly
R.M.Davies
0034 663 047 081

Data Federator data source not available causes Universe Connection error

I created a Data Federator project that connects to 20 servers across US and Canada. All data sources are SQL Server 2005. The DF project maps 40 source objects into 4 target objects. I created a universe based on the DF project and we have been quite pleased with Webi query response. Today one of the source servers was taken off line and this generated a connection error when trying to access the universe (not trying to access the data source that failed). We do not want the universe connection to error when one source server is not available u2013 is that possible?
If the answer is no then I see us abandoning what appears to be a great solution for real time distributed reporting and resorting to ETL and moving data.

Hi Chapman,
Can you be little elobrate on what you have done to solve the issue.
Thanks,
Dayanand

RFC connection Error in SLDCheck

Hi All,
I am trying to logon to Integration builder for that i getting the ESR builder address is not maintain. for this i have chk in SLDCheck t code ,there i am getting LCRSAPRFC connection error.I have test the RFC connection in that i am getting the
the error in register server program
Error Details     ERROR: program LCRSAPRFC_XID not registered
now wht i have to do for troubleshooting
Regards

Thanx for reply
when I test connection to Connection Test SLD_UC     error
Logon     Connection Error
Error Details     Error when opening an RFC connection
Error Details     ERROR: program SLD_UC not registered
Error Details     LOCATION: SAP-Gateway on host sapdevpi / sapgw00
Error Details     DETAIL: TP SLD_UC not registered
Error Details     COMPONENT: SAP-Gateway
Error Details     COUNTER: 62
Error Details     MODULE: gwr3cpic.c
Error Details     LINE: 1778
Error Details     RETURN CODE: 679
Error Details     SUBRC: 0
Error Details     RELEASE: 701
Error Details     TIME: Fri Jan 8 11:05:42 2010
Error Details     VERSION: 2
RFC SLD_UC is connection T
Gateway Host sapdevpi
Gateway server sapgw00
same error with
Connection Test SLD_NUC
Connection Test SAPSLDAPI   ( program Id SAPSLDAPI_DPI )
Connection Test SAPJ2EE
In Connection Test LCRSAPRFC error program id LCRSAPRFC_DPI
Logon     Cancel
Error Details     max no of 100 conversations exceeded / CPIC-CALL: 'ThSAPCMRCV' : cmRc=17 thRc=45
Error Details     ERROR: max no of 100 conversations exceeded
Error Details     LOCATION: CPIC (TCP/IP) on host sapdevpi
Error Details     COMPONENT: CPIC (TCP/IP) with Unicode
Error Details     COUNTER: 82
Error Details     MODULE: r3cpic_mt.c
Error Details     LINE: 10791
Error Details     RETURN CODE: 466
Error Details     SUBRC: 0
Error Details     RELEASE: 701
Error Details     TIME: Fri Jan 8 11:12:56 2010
Error Details     VERSION: 3
Regards
shahid

RFC connection error between Netweaver 7 EHP1 and Ides ECC6

Hi Friends,
I try to create source system in BI from Netwever EHP1 to IDES ECC6 EHP3.
During the creation I get a connection error, says. check connction parameter.
I checked the parameter, everything is fine. Server, System and number.
When I went to the SM59 and created a connction.
I.E. with the same parameter like system = 06 and server = compi9 gave client 800 etc.
The Host name is resolved to 192.168.2.111 wich is OK.
But when I run the connection test it shows me "ERROR: partner '80.156.86.78:sapgw06' not reached"
I have no idea where this IP '80.156.86.78" is comming from.
No Problem with the opposite way, from Ides to NW and login to the System is OK too.
Can anybody help me with this problem.
RG. Jimbob

Hi,
What is the next screen that comes up when you click on remote logon.
If no screen comes up then:
Check the user type of the user id used for this RFC.
It should be either dialog or service user for able to remote login.
If it open a new window and asks for password, then its excatly password issue.
Also make sure that the password is in numeric and correct.
Also make sure that the current user check box is unchecked.
Even if it dosent work, delete the connection and create again.
Please award points if helps.
Thanks
Santhosh

RFC connection Error

Dear All,
    when i connect our BI System to R/3 system via RFC in SM59 ,i am getting following error in BI system and also The problem occur in particular instance .(Other instance working fine in BI system)
Logon     Connection Error
Error Details     Error when opening an RFC connection
Error Details     ERROR: timeout during allocate
Error Details     LOCATION: SAP-Gateway on host chwslp05 / sapgw01
Error Details     DETAIL: no connect of TP sapdp15 from host sapp3b.eame.syngenta.org after 20 s
Error Details     COMPONENT: SAP-Gateway
Error Details     COUNTER: 162003
Error Details     MODULE: gwr3cpic.c
Error Details     LINE: 1973
Error Details     RETURN CODE: 242
Error Details     SUBRC: 0
Error Details     RELEASE: 700
Error Details     TIME: Mon Apr 27 14:29:33 2009
Error Details     VERSION: 2
Any one please suggest.
Thanks,
Thirumoorthy.

mostly your gateway servicve is not working check smgw tcode on that instance
you can do this goto sm59->select the instace execute tcode smgw
easy way is restart the instance
it will start working
Samrat

RFC Connection error in SM59 for SAP J2EE

Hi All,
i am getting the following error description while testing the connection for
SAP J2EE ...
Connection Test SAPJ2EE
Connection Type TCP/IP Connection
Logon              Connection Error
Error Details     Error when opening an RFC connection
Error Details     ERROR: program sapfallback not registered
Error Details     LOCATION: SAP-Gateway on host filip / sapgw00
Error Details     DETAIL: TP sapfallback not registered
Error Details     COMPONENT: SAP-Gateway
Error Details     COUNTER: 1483
Error Details     MODULE: gwr3cpic.c
Error Details     LINE: 1694
Error Details     RETURN CODE: 679
Error Details     SUBRC: 0
Error Details     RELEASE: 700
Error Details     TIME: Tue Mar 31 02:44:35 2009
Error Details     VERSION: 2
Help me resolve this
Regards,
Mahesh.

Hi,
Please follow this steps:
Creating RFC Destinations in the ABAP and Java Environment
You need to create the following RFC destinations in transaction SM59 (ABAP) and the Visual Administrator (Java):
u2022 AI_RUNTIME_JCOSERVER
u2022 AI_DIRECTORY_JCOSERVER
u2022 LCRSAPRFC
u2022 SAPSLDAPI
Depending on your client settings, it may be necessary to be logged on your SAP Exchange Infrastructure host as SAP system user with the authorization to maintain customizing tables and to release transport orders. Note, that user "SAP*" or "DDIC" does not have these authorizations.
Maintaining the RFC Connections (Transaction SM59)
1. Log on to your SAP Exchange Infrastructure central instance host.
2. Call transaction SM59.
3. Choose Create.
4. Enter at least the following:
RFC destination: AI_RUNTIME_JCOSERVER
Connection type: T
Description: <your description>
5. Choose ENTER
6. Choose the tab Technical settings and do the following:
a. Select Registered Server Program
b. In the Program ID field, enter: AI_RUNTIME_<SID> where <SID> is the SAP system ID of your Integration Server host. Use uppercase letters only.
c. Enter Gateway host and Gateway service of your Integration Server host. To find out the required parameters:
a. On the Integration Server host, call transaction SMGW
b. Choose Goto u2192 Parameters u2192 Display (see entries for gateway hostname and gateway service)
7. Choose tab Special Options and select the flag Unicode in the box Character Width in Target System.
8. Save your settings.
9. Repeat the steps 3 u2013 8 for the remaining destinations:
Destination
Values
AI_DIRECTORY_JCOSERVER
Program ID: AI_DIRECTORY_<SID>, where <SID> is the SAP system ID of your SAP XI host
LCRSAPRFC
Program ID: LCRSAPRFC_<SID>, where <SID> is the SAP system ID of your SAP XI host.
SAPSLDAPI
Program ID: SAPSLDAPI_<SID>, where <SID> is the SAP system ID of your SAP XI host.
10. Leave the transaction SM59 open for later tests.
J2EE Configuration for the Destinations (Visual Administrator)
1. On your SAP Exchange Infrastructure central instance host, start the J2EE Engine administration tool.
2. Choose Cluster u2192 Server u2192 Services u2192 JCo RFC Provider
3. In the section RFC destination, enter exactly the same program ID and gateway options for AI_RUNTIME_JCOSERVER that you used in the step Maintaining the RFC connection above. Additionally, set the number of processes to 10.
4. In the section Repository, do the following:
a. Enter the parameter for the SAP XI host: Application Server, System Number, Client and Language.
b. For User and Password maintain the login parameters for the user SAPJSF.
c. Select the flag Unicode.
6. Choose Set.
7. Repeat the steps 3 u2013 6 for the remaining destinations:
Destination
Values
AI_DIRECTORY_JCOSERVER
u2022 Corresponding values from SM59
u2022 Number of processes: 10
LCRSAPRFC
u2022 Corresponding values from SM59
u2022 Number of processes: 3
SAPSLDAPI
u2022 Corresponding values from SM59
u2022 Number of processes: 3
Testing the RFC Destination
After you have maintained all RFC destinations in both the ABAP and Java environment, you can check all the connections above as follows:
1. Call transaction SM59 again.
2. Open your RFC destination.
3. Choose Test Connection. No error should be displayed.
This will solve your problem.
Thanks
Laxmi Bhushan

Intermittent Connection Error

Similar Messages

Maybe you are looking for