Intermittent internet connection via airport express

I've got a MacBook Core Duo and a MacBook Pro Core 2 Duo...both with airport express. My internet connection is via a DLink DI-624 to Motorola cable modem. The DI-624 is setup with WPA security...which has been working fine for my windows laptop and PDA.
I've been getting random problems with web surfing even though the airport express icon shows full bars. During those problem times, safari reports no internet connection.
I've noticed that I can sometimes bring internet connection back by turning off the airport (via the icon at the top) and then turning it back on. Don't like this, as wireless connection should just work...and this doesn't always fix it.
Suggestions?
Thank you.
MacBook Core Duo and MacBook Core 2 Duo Mac OS X (10.4.8)

raxx wrote:
I am currently using the 802.11n Airport Express (firmware 7.4.2) as a wireless router to serve 2 802.11g Windows PCs. However, our internet connection seems to have slowed significantly recently.
When I connect directly via a LAN cable, my download speed is 25+ mbps. However, the download speed slows to only 6-7 mbps when connected wirelessly via the Airport Express. The speed remains this slow even when only one computer is connected wirelessly.
In general an Ethernet connection will be faster than a Wi-Fi connection.
In AirPort Utility for Mac (which ought to be similar for the same program for Windows) you can enter "manual setup" mode, then select the "Advanced" panel, click the "Logs and Statistics" button, then click the "Wireless Clients" tab. If you can do that, what values do you see in the lower part of the window for "SIgnal" and "Noise"?

Similar Messages

Internet speed slows down when connected via airport express

Internet speed slows down when connecting via airport express. When connecting directly via the timecapsulethe internet speed is ok, when connecting via the airport express the speed slows down.What can I do to change that? Any suggestions?

Turn off the AirPort Express completely as a test, and move your computer very close to the location of the Express.
As I said before, the Express can only extend the bandwidth (speed) that it receives from the Time Capsule, so the speed that you see there with the Express powered off will be the fastest speed of which the Express is capable.
The Express will make the signal go further when it extends....but it will not make the signal go faster.
A good location for a device that extends wirelessly is a point that is about half the distance from the Time Capsule and the general area that needs more wireless coverage.
If you locate the AirPort Express too far from the Time Capsule or there are more than a couple of walls in the signal path, the signal will be very slow by the time that it reaches the Express....and the Express simply extends a signal that has already slowed down significantly.
If you already have the Express located about half the distance between the Time Capsule and general area that needs more wireless coverage, how many walls, ceilings or other obstructions are there in the signal path between the Time Capsule, the AirPort Express and the area that needs more coverage?
Often, due to obstructions, it is just not possible to achieve good performance when you try to extend a network wirelessly. The solution is connect the AirPort Express to the Time Capsule using a wired Ethernet connection.
There is virtually no signal loss with this type of connection, so the Express can be located exactly where it is needed and it will produce a much faster wireless signal in this type of setup.

Problem with not getting Internet Connect on AirPort Express

Problem with not getting Internet Connect on AirPort Express (version7.6.4). Error says cannot get valid IP address. Have reset Siemens SpeedStream 4100 several time, even with tech support from the big "A" DSL provider. Plug MacBook Pro directly into modem and works fine. Unplugged AirPort, even reset it, still no luck. A bad Express?? or am not looking in the right place to make connection. Was working fine up until Sunday.

Connect the AirPort Express (AX) to the cable modem via Ethernet cable.
In configuring the AX using AirPort Utility:
Under Internet, set the connection to be Ethernet using DHCP.
Under Connection Sharing, set it to distribute a range of IP addresses.
Under AirPort>Wireless, set the Wireless Mode to Create a wireless network, and fill in the remaining settings in the same window. Until you get it working, you might want to set Wireless Security to None.

G5 & PC NOT STAYING CONNECTED VIA AIRPORT EXPRESS!

I've got a G5 and a PC - Hoped that Airport Express would allow both to access internet (via cable modem).
The connection drops after a little while. Everything says its working but obviously it's not.
ANY HELP??!!!
Thx!

reinis wrote:
I have white Macbook (802.11g capable) and Airport Express (802.11g capable).
I have a LAN internet connection, which is pretty fast. When I connect the cable to my ethernet and try to download something (for instance, speedtest.net) then the download speed is 33Mbit/sec, and upload is 20Mbit/sec.
I also have an Airport Express router - the 802.11g to be specific. So in the Airport Utility, under Wireless I selected "802.11g ONLY" and selected 24Mbit/sec Multicast rate.
When I tried to download something when conected to my Airport Express router - what actually happened, is that my computer is 2 m away from the Airport Express and the max download speed approximately should be ~24 Mbit/sec, but it turns out that the down speed is ONLY 14 Mbit/sec and the upload speed is 11 Mbit/sec.
So it means, that the Airport Express actually cannot deliver the 24 Mbit/speed.
I am actually pretty dissapointed, because I was kind of okay with the fact that I will loose those ~10 Mbit/sec from my actual internet sped when connected via Airport express, but I did not expect that it would be halved.
Any solutions?
According to one source, the maximum throughput of 802.11g is 25 Mbps. That assumes ideal conditions. To learn more about those conditions in your case, launch AirPort Utility, double-click on your AirPort station to enter "Manual Setup" mode, select the "Advanced" panel, click on the "Logs and Statistics" button, then click on the "Wireless Clients" tab. There you will see values for signal and noise. The closer those two numbers are together, the worse throughput you can expect.
If the value for noise is high, you might try setting your AirPort unit to a different channel.
All the above is based on your having no other Wi-Fi equipment.

Internet connection via Airport Extreme/router thats not working, why?

I have been having problems with the internet connection via Airport Extreme which I find it a bit unusual and its still driving me nuts! This is what happened:
I have lost my internet connection last Sunday evening upon my return from a weekend away from home. The last time I have used the internet connection on my macbook was the previous Friday morning. Prior to the apparent disconnection on Sunday, I have always used my internet connection wirelessly through Airport Extreme (that is connected via ethernet cable to the NETGEAR DG834v2 ADSL modem which had worked beautifully until the problem arose on my return). This wireless internet connection allowed me to surf the internet anywhere in my home.
However, upon the successful re-connection to the internet via the modem router, I have discovered several new problems. I have tried to set up the internet connection wirelessly again but instead the following happened:
1. Router (Netgear) drops ADSL connection and cannot reconnect when connected to airport via Ethernet. (which is the case when using airport wireless).
2. Router connects to ADSL fine when computer is connected to it via Ethernet. (However, router disconnects when magsafe power adapter is taken out for some inexplicable reason!)
3. Router connects to ADSL fine when nothing is connected to the router (ie. No Ethernet connections)
4. Router connects to ADSL fine when connected to airport via Ethernet and computer is connected to airport via Ethernet.
So from the above, I cannot connect to the internet properly whether wirelessly or not so I suspect it could be faulty router or could it be airport extreme? I have asked my ISP for an explanation and all they have said is that it cannot be the mis-configuration but could be to do with the power adaptors or the way plugs are set up and suggested I take out all the power plugs (and power surge protector) out to switch everything off, the macbook, router, printer and airport extreme. However, when I have re-plugged them all back in, the problems I have described above still persists!
Would appreciate any help if anyone here recognises why this is the case and what seems to be the cause of this. If so, what should I do? Though I have written back to my ISP again yesterday for more help so im waiting to hear from them...
Thanks
u2dougal

I have been having problems with the internet connection via Airport Extreme which I find it a bit unusual and its still driving me nuts! This is what happened:
I have lost my internet connection last Sunday evening upon my return from a weekend away from home. The last time I have used the internet connection on my macbook was the previous Friday morning. Prior to the apparent disconnection on Sunday, I have always used my internet connection wirelessly through Airport Extreme (that is connected via ethernet cable to the NETGEAR DG834v2 ADSL modem which had worked beautifully until the problem arose on my return). This wireless internet connection allowed me to surf the internet anywhere in my home.
However, upon the successful re-connection to the internet via the modem router, I have discovered several new problems. I have tried to set up the internet connection wirelessly again but instead the following happened:
1. Router (Netgear) drops ADSL connection and cannot reconnect when connected to airport via Ethernet. (which is the case when using airport wireless).
2. Router connects to ADSL fine when computer is connected to it via Ethernet. (However, router disconnects when magsafe power adapter is taken out for some inexplicable reason!)
3. Router connects to ADSL fine when nothing is connected to the router (ie. No Ethernet connections)
4. Router connects to ADSL fine when connected to airport via Ethernet and computer is connected to airport via Ethernet.
So from the above, I cannot connect to the internet properly whether wirelessly or not so I suspect it could be faulty router or could it be airport extreme? I have asked my ISP for an explanation and all they have said is that it cannot be the mis-configuration but could be to do with the power adaptors or the way plugs are set up and suggested I take out all the power plugs (and power surge protector) out to switch everything off, the macbook, router, printer and airport extreme. However, when I have re-plugged them all back in, the problems I have described above still persists!
Would appreciate any help if anyone here recognises why this is the case and what seems to be the cause of this. If so, what should I do? Though I have written back to my ISP again yesterday for more help so im waiting to hear from them...
Thanks
u2dougal

Slow internet connection via AirPort on MacBook running 10.5.7

The internet connection via AirPort on my MacBook is frustratingly slow, and I have no idea why.
I have an AirPort Extreme connected to a Virgin Media cable modem, a new iMac and a two year-old MacBook, both running 10.5.7. No problems at all with the wireless connection on the iMac - I get the full near-10Mbps download speed I'm paying for, despite the fact it's at the other end of the house. Not so on the MacBook, where I get barely 2Mb, even if I'm sat next to the router.
I've had other AirPort problems since the 10.5.6 update - notably one common to a lot of people on here, it seems, of the AirPort dropping the wireless connection every 2 mins. This was only 'fixed' by the fairly drastic workaround of essentially abandoning my user account and connecting via a different one.
For the slow internet problem, I've tried resetting the PRAM, turning off my cordless landline phone, changing the wireless channel - to no avail. I can't test the wired connection as my MacBook doesn't recognise my Ethernet port, it would seem, and hasn't for a long time.
Can anyone help? Thanks in advance.

For the slow internet problem, I've tried resetting the PRAM, turning off my cordless landline phone, changing the wireless channel - to no avail. I can't test the wired connection as my MacBook doesn't recognise my Ethernet port, it would seem, and hasn't for a long time.
I assume that you meant NVRAM as PRAM is not used with Intel-based Macs. Regardless, network settings are not stored here and resetting it won't really help. The fact that your MacBook is not recognizing the built-in Ethernet port is telling me that may have an issue with the system board ... that may be showing up as poor performance with the AirPort as well. I suggest that you take your MacBook in to your local Apple Store to have them take a look.

Slow internet connection via AirPort on MacBook under 10.5.7

The internet connection via AirPort on my MacBook is frustratingly slow, and I have no idea why.
I have an AirPort Extreme connected to a Virgin Media cable modem, a new iMac and a two year-old MacBook, both running 10.5.7. No problems at all with the wireless connection on the iMac - I get the full near-10Mbps download speed I'm paying for, despite the fact it's at the other end of the house. Not so on the MacBook, where I get barely 2Mb, even if I'm sat next to the router.
I've had other AirPort problems since the 10.5.6 update - notably one common to a lot of people on here, it seems, of the AirPort dropping the wireless connection every 2 mins. This was only 'fixed' by the fairly drastic workaround of essentially abandoning my user account and connecting via a different one.
For the slow internet problem, I've tried resetting the PRAM, turning off my cordless landline phone, changing the wireless channel - to no avail. I can't test the wired connection as my MacBook doesn't recognise my Ethernet port, it would seem, and hasn't for a long time.
Can anyone help? Thanks in advance.

help...same here (mostly)
eight core macpro on the same wireless network (10 feet from extreme base station) as my macbook pro (2008 top of the line)
everything updated. the macpro is just fine with the internet, the macbook pro is horribly slow.
tried downgrading firmware on the airport...no difference.
help!!
Message was edited by: leino88
Message was edited by: leino88

Connecting via AirPort Express: Performance Help Needed.

Hello,
I'm grateful for ideas, instruction, pointers to threads I may have missed re: improving performance/determining the cause of poor performance when connecting via AirPort Express.
The deal: Up to 6 devices are connected to our AirPort Express. Only three of these are ever used simultaneously, though all remain "on," in either sleep or hybernate mode. Performance across the network is terribly uneven. Current data rate stats (a snapshot by way of the AirPort utility, in order of distance from the router):
iMac: 130 Mb/s
Printer: 54 Mb/s
Macbook Pro: 144 Mb/s
iPhone: currently "off"
PC (Connected via Belkin USB-type Wireless Adapter): 2 Mb/s
iPad: 39 Mb/s
Note: the Macbook Pro is often located in a room farthest from the hub, some 120 feet away and with partial direct line of site. Still, its performance is unimpeded.
At first glance, logic would dictate the worst problem is on the PC and caused by the Belkin adapter. But I've swaped that out for different USB solutions. Performace is seldom improved.
Wondering if:
a) The PC problem is in the data transfer rate of the PC bus. (Foregive me if I'm using "bus" incorrectly here. I'm guessing you'll know what I mean.) Or is it the nature of the USB adapters?
b) Please also note that the Printer, which sits close to the router, often has a drop in data rate, sometimes to the single digits.
Again, I'm grateful for ideas, instruction, or pointers. Also for wisdom on "extending" the network, perhaps by adding another AirPort device. I'm rather clueless about such stuff.
Thanks in advance- Best for the weekend-

Thanks,
I'm pretty sure the card is seated properly (it works most of the time after all). I couldn't get it to work when I installed it because it wasn't seated properly, I pushed it in as far as it could possibly go and it has worked since (except after extended periods of use). The Airport express is three feet from the eMac with only a couple of bits of wood between them. The connection does not go down at times which I can link with the use of any particular appliances (When the eMac stops working, the iBook is always fine, even in a similar position). It is the apparently time-dependent aspect that I can't figure out (I only notice it on those, fairly infrequent, occasions when I am online for a few hours at a time). The eMac discussion group is a good tip. Ta.

OS X Leopard and internet connection via Airport

Help! I upgraded to OS X Leopard over the weekend and now I can't connect to the internet. I am using a cable model via Airport express. I'm picking up the airport connection & network but still can't get onto the internet (I get a "server unavailable" message). I upgraded both my desktop and laptop. The laptop is working intermittently, but the desktop only rarely. I have a PC laptop that is still able to connect without a problem. I've tried unplug/replugging the Airport; manually entering the ISP address; and installing the "login and keychain update" download but nothing is working. Any suggestions? Thanks!

Do you have Internet Sharing enabled (in the Sharing Preferences) on the Leopard Mac? These things have changed somewhat in Leopard from Tiger.

Trying to share internet connection using Airport Express

I have an internet connection via a Verizon Wireless broadband card in the Express Card slot in my MacBookPro. I share this connection to my iMac via Airport and I have an Airport Express card connected to a printer & stereo. However, when I establish the Airport internet connection (internet sharing in System prefrences) it establishes a wireless network in the MacBook (I think) as evedinced by the Airport signal (fan) logo changing to a vertical arrow. This precludes connecting to the Airport Express (the Airport Express network is not shown in the Airport pull down menu, only the MacBook network). My question is: can I somehow share the internet connection using the Airport Express network???

ejagnut, Welcome to the discussion area!
Configure the AirPort Express (AX) to join the wireless network created by your MacBook Pro. The directions can be found in KB 302153, AirPort Express: How to join an existing wireless network in client mode.

Can't find certain servers connecting via Airport Express

For the last couple of weeks I've been intermittantly unable to access certain websites (time.com / nytimes.com) when connected to the Net via Airport Express. Sometimes these pages come up, more often then not, they don't. I have no problem receiving email or accessing other sites. Also, I always loose my connection when streaming news stories from NPR. However, I have no such problem when connected directly via ethernet. Thus, it seems to be some glitch with airport express. Does this make sense to anyone?

Gerard Van Schip wrote:
I have 3 printers connected to the network via Ethernet and as long as I'm connected directly to the network I can print but as soon as I connect to one of the 4 Airport Express units I have I can no longer print.
You don't describe what happens when you try to print.
Does the IP address your computer is granted in both configurations match in the first three elements (such as 10.0.1.5 and 10.0.1.7)? If not, then your AirPort Express unit is creating a new "subnet", which can cause problems when your computer tries to communicate with the printer.
Try adding the printer in the "Print & Fax" panel of System Preferences by choosing the "IP" option and entering the IP address of the printer.

No Highspeed Internet possible via Airport Express?

Hi,
i am using a windows xp laptop and my router is connected to an airport express base station. I am accessing the internet through the Airport Express WLAN.
I have a broadband internet connection with 16MBIT down. When i connect via the WLAN i get 6MBIT down maximum. When i use a LAN cable to connect directly to my modem i get 16MBT.
How is this possible? How can i optimize the WLAN to get full speed?
I have the latest firmware and software for the airport express.
Thank!

I'm confused by your speeds listed though. I've
never heard of consumer broadband that's anywhere
close to 2MB/s. Mine tops out at under 1/2MB/s, and
at best I've seen companies offering maybe 50% faster
than that (for double the money or more).
Are you sure you're listing the correct speeds?
I suspect he is, remember he is in Germany where you can get even faster speeds up to 50Mbs
Germany preps 50 Mbit broadband
Deutsche Telekom, parent company of T-Mobile USA, announced that it will begin installing VDSL2 broadband across Germany and will have the technology available in ten metropolitan areas by the end of this year. VDSL2 will offer download speeds of up to 50 Mb/s and uploads of up to 10 Mb/s. Deutsche Telekom said that the network will deliver about 100 free and premium TV channels to customers.

Can I use Ethernet for Internet connection and Airport express for printer

How / can I use Ethernet for Internet connection and use an airport express to set up wifi for printer and Apple TV?
Macbook Pro. OS X 10.9.4

I've never tried it, so I don't know what the results will be.
However, you can move Ethernet to the top of the Services list in Network System Prefs which will cause it to be the Internet source. There is a command in the gear menu to set the Service order. However, after thinking about it, if there isn't an internet connection via Wi-Fi, it might automatically drop down to the Ethernet connection.
Then, you can set up your Wi-Fi so that it doesn't connect to the Internet, as Linc stated. How to do that would be dependent on the Router.

PBG4 tries to connect via airport express, but I want it to use ethernet!

Hey y'all, and thanks in advance for your help!
I use airport express to connect itunes to my stereo, and for nothing else. My computer, however, keeps trying to connect to the internet through the airport express, and I end up having to turn the airport off until I'm on a website, then turn airport back on.
How do I tell my computer to NEVER attempt to connect to the internet via airport, and to ONLY use ethernet to connect???
Thanks again!

Click here and follow the instructions.
(41434)

Sharing my internet connection via Airport

I have an Intel MacPro with an Airport card. It is connnected to the internet via one of its ethernet ports. I am trying to share that internet connection via the Airport card with my Windows XP machine. I was able set up the wireless connection using 128-bit encryption, and successully access websites from my Windows XP laptop. However, it seems that neither AIM nor Yahoo Messenger nor MSN IM on my Windows machine can connect via the MacPro internet sharing. I can only use a web browser on the Windows machine successfully. Is there some additional configuration I need to do get the internet connection sharing to handle other kinds of connectsions, rather than just web pages?
Paul
Mac Pro 266 GHz Quad Xeon Mac OS X (10.4.8)

I'll admit that I'm merely guessing here. Are you running the firewall on your Mac? It is possible the firewall is blocking the ports that the messaging software is using. If your firewall is on turn it off and try using the Yahoo and/or MSN messaging software. If it now works see if you can determine what ports are being used and edit your firewall to keep those ports open.

Intermittent internet connection via airport express

Similar Messages

Maybe you are looking for