Intermittent issue with Wifi network card.

Nothing can be more annoying than an intermittent issue. Unfortunately it does happen to my MBP. This is the new MBP purchase Jan. of this year. About 2 months ago, the MBP developes a problem. The sympotom is, after powering it on, the Wifi network card sometimes suddently stop working, even cannot be recognized by the system accidently. After the problem arise, I cannot turn on wifi again. The only way to get it back is to restart it. It used to work well with my home network and company network.
I have tried every possible mean to figure out what's wrong with it. Tried SMC reset, PRAM rest. Reinstall a new OS on a new partition (per instruction from Apple support). I hate to say this is a HW issue but support people from Apple did suggest sending it to a service center for a check up.
Before I actually dropping it at service center, I wanna know if someone has experienced that before?
Repeat, it used work well with my router.

senthil,
It helps to describe your setup parameters.
Which antenna(s) do you have?  Either 2 internal antennas or 1 external antenna.
How far away and what obstructions (walls - wood/concrete) is the wi-fi router?
I am a volunteer. I am not an HP employee.
To say THANK YOU, press the "thumbs up symbol" to render a KUDO. Please click Accept as Solution, if your problem is solved. You can render both Solution and KUDO.
The Law of Effect states that positive reinforcement increases the probability of a behavior being repeated. (B.F.Skinner). You toss me KUDO and/or Solution, and I perform better.
(2) HP DV7t i7 3160QM 2.3Ghz 8GB
HP m9200t E8400,Win7 Pro 32 bit. 4GB RAM, ASUS 550Ti 2GB, Rosewill 630W. 1T HD SATA 3Gb/s
Custom Asus P8P67, I7-2600k, 16GB RAM, WIN7 Pro 64bit, EVGA GTX660 2GB, 750W OCZ, 1T HD SATA 6Gb/s
Custom Asus P8Z77, I7-3770k, 16GB RAM, WIN7 Pro 64bit, EVGA GTX670 2GB, 750W OCZ, 1T HD SATA 6Gb/s
Both Customs use Rosewill Blackhawk case.
Printer -- HP OfficeJet Pro 8600 Plus

Similar Messages

  • Lion Upgrade - issue with WiFi Network

    I recently upgraded to Lion and now everytime I restart my wireless network (Time Capsule) is not recongized and I must manually select it. I have the same issue with my magic mouse, although it does reconginze my bluetooth keyboard. What can I do to fix the issue?

    Yes, same WiFi problem with safe mode. Everything was perfect until the upgrade to Lollipop. Now WiFi speed is 1/10 of before, and phone is slow in general. realy sad, sometimes even whatsapp messages takes minutes to be delivered.
    Does anyone know how to select only 5ghz channel for the WiFi on the phone?

  • Issues with WiFi connection to Deskjet 3545

    Hi,
    I have number of issues with WiFi connection to my new Deskjet 3545 AIO:
    1. Printer is not able to get IP address automatically from home WiFi router (all other devices get IP with no problem). Using WPS allow printer to register in network but after switching off, WPS setting is not stored, so I have to do it again. This I was able to solve with manual entering of IP address, netwrok mask, DNS and gateway address.
    2. Official HP software installed from HP site was able to find printer for 3dattempt, and it started to work. But after a while, "HP utility" program loose connection to printer,  so I can not see any parameters, and I get "can not find printerä message when start to to print. After a some time (minutes to hours), whithout any action from my side, connection to printer seems to be restored, so I can see printer parameters in "HP utility" and printing is started.
    3.  Official HP software installed from HP site on PC (Windows 7) is not able to find printer on WiFi at all, works only with USB.
    All this is disaponinting and unexpected, as my office HP LaserJet Pro 400 Color works perfect.

    Hi @DmiBro,
    Welcome to the HP Forums!
    I see that you are having some wireless issues with your HP Deskjet 3545 to your Mac OS X 10.10 and Windows 7 computers. I am sorry to hear this, but I am happy to help!
    I would recommend the following guides:
    HP Single-Function and Multifunction Printers - 'Printer is offline' Message Displays on the Compute.... (The solutions for OS X v10.8 Mountain Lion and OS X v10.9 Mavericks will work on Mac OS X 10.19 Yosemite.)
    HP Single-Function and Multifunction Printers - 'Printer is offline' Message Displays on the Compute....
    HP ENVY 4500 and HP Deskjet Ink Advantage 3540 e-All-in-One Printer Series - Printer Does Not Mainta....
    Tips for troubleshooting wireless connection issues
    The following tips can help you troubleshoot and avoid wireless connectivity issues. You can try these tips separately or in combination to get a successful wireless signal.
    Move the printer and the computer closer to the router, but no closer than 6 ft (1.8 m). Wireless signals can be weaker at greater distances between the printer and the router.
    If you are experiencing an intermittent wireless connection, try restarting your router. Consult your router manufacturer, Internet service provider, or network administrator for instructions on how to restart the router.
    Remove any metal objects between the printer, the computer, and the router. Objects such as refrigerators, microwaves, or metal bookcases can interfere with wireless transmission.
    Move any device that emits radio signals, such as microwaves and cordless telephones, farther away from the printer. Such devices can interfere with wireless signals.
    I would also recommend this website, HP Wireless Printing Center - Troubleshooting Issues.
    Hope this information is helpful, and have a nice day!
    RnRMusicMan
    I work on behalf of HP
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" to say “Thanks” for helping!

  • A SERIOUS issue with WIFI in Pavilion 15-p002nk

     Hi  , Thank you for visiting the HP Support Forums and Welcome.Thank you for the very detailed information. I have looked into your issue about your  HP Pavilion 15-p002nk Notebook and issues with the Wireless disconnecting. Here is a link to the troubleshooting the Wireless connection, if you need it.
    If this continues I would change the Channel on the router. Routers are capable of communicating to your Notebook on several different channels. If your neighbours Wi-Fi is  on the same channel, your network speeds might have issues. Some say this helps fix this problem Microsoft Fix it.   Here is a link to help as well. Hope this is helpful. Thanks.

    Hi all.. Since the time i bought my new PC laptop "HP Pavilion 15 Notebook PC, Number: 2S23EA#BH4" , I've an issue with Wifi Connection; it's discconecting by itself sometime without any reason, then, it reconnect again like nothing happend because the "Connect automatically " option on Windows 8.1 is checked. Although, sometimes when it disconnect I have to reconnect by myself, after many troubles like  I have to restart the computer, or activating the Airlplane mode, disabling the Wifi cards and enable it again..  The strange behaviours of the Wifi connection is that is sometimes show me that the Wifi's stengh is full, all 5 bars, while it should be just like 2 bars or 3 at maximum, because where I'm connecting is a bit far from the router. but this just for few seconds before disconnecting, in addition, sometimes the Wifi card disable itself and re-enable at the moment and reconnect again. Moreover, once upon time when it disconnect, it dosen't detect my router or any other Wifi network around me. while there's more than 6 Wifi's available where i am living. Generally, this issue is not excessive, but those last days, it is being immoderate. i tried to look for some solution, but none of those proposed solution worked for me. I wish that i can find some resolution of this annoyning problem. advance Thank for everyone. 

  • Recently started having issues with WiFi

    Hello everyone,
    Recently I started having serious issues with Wifi. I fixed it kind of by turning off iTunes iCloud backup, but generally the signal is low. As an iOS 5 tester in the Apple Developer program, I tested it for months on my iPod without any problems. When I got my 4S, I never had a problem with it until just a few days ago.
    A friend of mine said she was also having the same problem. She claimed she turned off iCloud backup as I did, turn off both WiFi on her Mac and on her phone and reboot both. I did this. Then I turned them back on. She also suggested I forget the network and re-enter the security key. That done, it connected and had a stronger signal. After a while though, it continues to drop peareoticly. I notice that it stay's connected a lot longer now. Another friend also suggested I turn off bluetooth, although that didn't really help much. What seems to fix it tempararly is iCloud backups have to go off.
    The Mac is still working great. No stupid connection errors and or dropping. I'd be curious to see if I would be having this problem with my iPod Touch. Probably not.
    Anyone find any deffinate solutions to this?
    Thanks.

    Thanks for the reply. What do you mean "2.4 GHz WiFi reliability is a hit or miss"?
    Warranty is over so no problem there.
    I see a lot of 7260 cards, is there one in specific I need? Example:
    http://goo.gl/PKcRIU
    http://goo.gl/ooaUEw
    N would actually be fine, don't really need AC, recently upgraded my router and don't feel compelled to change...the price difference is small, and I'm all for future-proofing, but, I just need the thing to WORK.
    Thanks again.
    -kj-
    T440p | Core i7 4700MQ @ 2.4 ghz | 8 GB | Samsung 840 EVO 240gb SSD | 14" | Intel HD Graphics | Windows 7 Pro 64-bit

  • Anyone else had issues with phone network being unavailable on iPhone 4 since updating to iOS 5.0.1? My iPhone 4 is continually searching for a network and does not find my provider. I swapped SIMs with another iPhone 4 on ios 4 to confirm device problem.

    Has anyone else had issues with phone network being unavailable on iPhone 4 since updating to iOS 5.0.1? My iPhone 4 is continually searching for a network and does not find AT&T, my provider. I swapped SIM cards with another iPhone 4 running ios 4 and established this is a device problem, not a SIM card problem.

    Does the device get any signal? 
    Sounds like the device may have had a hardware failure.  If it is out of warranty, the only option is the Out of Warranty replacement.
    AppleCare is only an option if it is still under the original warranty.

  • Macbook Pro Retina issues with Wifi Speeds

    I have one of the new Macbook Pro 15" Retina models and have been having issues with Wifi Speeds.  Apple has replaced the computer but have the same issue with the new one.  When doing a side-by-side comparison with older Macbook Pros and PC's I'm seeing around a 10 megabytes per second difference.  Is anyone else experiencing the same issue?

    So an update on what I've found.  After testing two different MBP Retna's basically hourly for 4 weeks I found a few interesting things, but ultimately resolved my issue.  The first thing I found consistently between both MBP Retina's both on my network and in the Apple store on their network was the first thunderbolt port closes to the screen is slower than if you try to use the LAN cable adapter on the second port. I saw about 10 GBps between the two ports.  The second thing i found was these new MBP Retina's aren't really compatible with older Apple networking technology. I have a single band Airport Express and a single band Time Capsule.  Using either router they only worked on the 2.4 5Ghz setting and even with that the speeds constantly fluxuated. Most times I got between 2 - 10 GBps.  After hours of troubleshooting it was recommended to update either my Time Capsule or Airport Express to one of the newer dual bands, which I did.  After purchasing and setting up a new dual band Airport Express and spliting the networks to have one band constantly on the 2.4 5Ghz setting and the other set to automatic both with differing network id's this solved my problem.  I now consistently see download speeds of around 35GBps and upload around 6GBps.  So connecting the dots and drawing logical conclusion, these new MBP Retinas are really only compatible with newer dual band Time Capsules or Airports.  Even though my single band was also set to 2.4 5Ghz, the same as the dedicated network used now on my dual band Airport Express, this MBP Retina had issues maintaining WiFi speeds.

  • Intermittent issues with video output initialization

    Hi Guys,
    I have received a new (i5, 15') Mac-book Pro more than 9 months ago. About 6 months ago it started having some serious intermittent issues with video output. Those issues are numerous and different every time, but all seems to lead to GPU problem. In chronological order:
    1)Started showing static colors as flickering and white color as blue.
    2)Blue screens in bootcamp and hangs in mac os
    3)Startup problems (fail to start)
    4)Startup problems resolved with firmware patch, but video fails to initialize during startups:shows black on mac os, and distorted green during bootcamp.
    So right now I am stuck with #4. The main issue is that it is intermittent - sometimes it starts to happen and sometimes it does not. Is there any way I can make apple replace the unit or the video-card? I did bring it to a apple certified service center, but they did not give any crap, even when I was able to demonstrate it to 2 people in there and gave me back the unit after failing to reproduce the problem on their own. I have all those problems in video and photos, but I don't see anywhere I could send them besides this forum.
    Some of the evidence (I have much more):
    http://www.youtube.com/watch?v=MsTYnUFCX1I
    http://www.youtube.com/watch?v=zK85Hi9gx24
    http://www.youtube.com/watch?v=pRH3DpN7qB0
    http://www.youtube.com/watch?v=dMXo8qF6S_k
    Message was edited by: Breakable

    "I have received a new (i5, 15') Mac-book Pro more than 9 months ago."
    You are still under warranty. *Call AppleCare*
    "Is there any way I can make apple replace the unit or the video-card? I did bring it to a apple certified service center, but they did not give any crap"
    No you cannot make Apple do anything. What you can do is call _Apple Customer Relations_ in your country. You can call AppleCare & ask politely & firmly to be transferred over to Customer Relations if there is no direct phone number like there is in the US. Relay to them what you stated in this post. See what they can do for you.
    You posted in the wrong MBP area (Original). I have requested that a HOST move your post to the proper forum MacBook Pro (2008 and Later). There will be no need for you to repost.

  • Complaint: Issue with the Network

    Facing issue with the Network for most of the time and sometimes even Data for both 3G and 2G.
    My service provider was BSNL, Hyderabad, AP, India-50016
    I have check even with my service provider from there they don't have any issue..
    But the same works with my old BB8520 and others.
    Please can you help me?
    BBZ3-STJ100-1 OS V10.2.1.3247

    Is it h+ or H+?
    I've had similar issues when my sim card was bad. I had cut it down to micro sim size and it worked fine for a month. Then it stopped working in the Z10 but worked in my 9810. Try having your carrier replace your sim card.
    1. Please thank those who help you by clicking the "Like" button at the bottom of the post that helped you.
    2. If your issue has been solved, please resolve it by marking the post "Solution?" which solved it for you!

  • TS1398 After the recent update of iOS 7.0.6 my phone is having issues with wifi connectivity. It gets disconnected most of the time. It is very toublesome while watching videos, sending pics, chatting and so on. Please advise. Thank you.

    After the recent update of iOS 7.0.6 my phone is having issues with wifi connectivity. It gets disconnected most of the time. I went through support page and done with "Reset Network settings" too but it doesn't help. It is very toublesome while watching videos, sending pics, chatting and so on. Please advise.
    It works fine in LTE network. The problem is with WIFI only.
    Thank you.

    Hey Siddh.s!
    Here is an article that will help you troubleshoot this issue with your Wi-Fi connections:
    iOS: Troubleshooting Wi-Fi networks and connections
    http://support.apple.com/kb/ts1398
    Thanks for using the Apple Support Communities. Have a good one!
    -Braden

  • Very poor connection with wifi network with mini iPad.

    I recently bought à new mini iPad. The connection with wifi network is lost very often  and therefor not Stable. I tried the tips such as forgetting the network and connecting again, but that doesn't help. What can I do?

    Do #5.
    Some things to try first:
    1. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
    2. Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
    3. Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
    4. Go into your router security settings and change from WEP to WPA with AES.
    5.  Renew IP Address: (especially if you are droping internet connection)
        •    Launch Settings app
        •    Tap on Wi-Fi
        •    Tap on the blue arrow of the Wi-Fi network that you connect to from the list
        •    In the window that opens, tap on the Renew Lease button
    ~~~~~~~~~~~~~~~~~~~~~~~~~
    iOS 6 Wifi Problems/Fixes
    Fix For iOS 6 WiFi Problems?
    http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
    Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
    http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
    How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
    http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
    iOS 6 iPad 3 wi-fi "connection fix" for netgear router
    http://www.youtube.com/watch?v=XsWS4ha-dn0
    Apple's iOS 6 Wi-Fi problems
    http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
    ~~~~~~~~~~~~~~~~~~~~~~~
    Look at iOS Troubleshooting Wi-Fi networks and connections  http://support.apple.com/kb/TS1398
    iPad: Issues connecting to Wi-Fi networks  http://support.apple.com/kb/ts3304
    WiFi Connecting/Troubleshooting http://www.apple.com/support/ipad/wifi/
    How to Fix: My iPad Won't Connect to WiFi
    http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
    iOS: Connecting to the Internet http://support.apple.com/kb/HT1695
    iOS: Recommended settings for Wi-Fi routers and access points  http://support.apple.com/kb/HT4199
    How to Quickly Fix iPad 3 Wi-Fi Reception Problems
    http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
    iPad Wi-Fi Problems: Comprehensive List of Fixes
    http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
    Fix iPad Wifi Connection and Signal Issues  http://www.youtube.com/watch?v=uwWtIG5jUxE
    Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
    How To Fix iPhone, iPad, iPod Touch Wi-Fi Connectivity Issue http://tinyurl.com/7nvxbmz
    Unable to Connect After iOS Update - saw this solution on another post.
    https://discussions.apple.com/thread/4010130
    Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
    ~~~~~~~~~~~~~~~
    If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
     Cheers, Tom

  • I have installed the agent 10 or 15 times and one installation hasfailed, no error appeared during the installation but I am havinginconsistent issues with my ethernet card not working here and there. Werebooted and can log into Novell client but th

    I have installed the agent 10 or 15 times and one installation has failed, no error appeared during the installation but I am having inconsistent issues with my ethernet card not working here and there. We rebooted and can log into Novell client but the login prompt did not appear for ESM client or the icon was not in the systray. Everything seems to work, besides at times (a couple times today) it terminates his ethernet card/connection. I would re-image his computer but he has several applications and it would take several hours, so I am hoping someone has an idea to fix this issue. So I was trying to figure out why he did not get the prompt to login and why it's not in the systray and it appears to not have completed the install? I checked the add/remove programs, its not listed within their, I also checked the registry and found nothing for endpoint within their, but the files are within c:\program files\novell\zenworks endpoint security.
    I have also tried uninstalling it but that fails due to it "not being installed", and it will not reinstall over itself either.
    I did notice that stuninstdrv.exe is running in task manager. Any help would be great...
    Windows xp sp3
    ESM 3.5.154
    Thanks,
    Andy

    If you are searching the registry, check for the "Senforce" string. It should be at HKLM\Software\Senforce
    Try running the install program for the ZSC with the following command line:
    setup.exe /V"STUNINSTALL=1"
    If you've specified an uninstall password, try this one instead:
    setup.exe /V"STUNINSTALL=1 STUIP=password"" (please note the double quote at the end)
    Let me know if that helped you.
    Daniel
    >>>
    From: Andy_DeWees<[email protected] du>
    To:novell.support.zenworks.endpoint-security-management
    Date: 2/5/2009 12:52 PM
    Subject: I have installed the agent 10 or 15 times and one installation hasfailed, no error appeared during the installation but I am havinginconsistent issues with my ethernet card not working here and there. Werebooted and can log into Novell client but the login prompt did not appearfor ESM client or the icon was not in the systray. Everything seems towork, besides at times (a couple times today) it terminates his ethernetcard/connection. I would re-image his computer but he has severalapplications and
    I have installed the agent 10 or 15 times and one installation has failed, no error appeared during the installation but I am having inconsistent issues with my ethernet card not working here and there. We rebooted and can log into Novell client but the login prompt did not appear for ESM client or the icon was not in the systray. Everything seems to work, besides at times (a couple times today) it terminates his ethernet card/connection. I would re-image his computer but he has several applications and it would take several hours, so I am hoping someone has an idea to fix this issue. So I was trying to figure out why he did not get the prompt to login and why it's not in the systray and it appears to not have completed the install? I checked the add/remove programs, its not listed within their, I also checked the registry and found nothing for endpoint within their, but the files are within c:\program files\novell\zenworks endpoint security.
    I have also tried uninstalling it but that fails due to it "not being installed", and it will not reinstall over itself either.
    I did notice that stuninstdrv.exe is running in task manager. Any help would be great...
    Windows xp sp3
    ESM 3.5.154
    Thanks,
    Andy

  • I added an iTunes card to my account. THe balance shows on the account, but I can not download, because iTunes has an issue with the debit card linked to the account. Shouldn't it default to the balance from the card I added?

    iTunes keeps telling me my debit card is declined, when I am trying to use an iTunes card that I added today. The amount from the iTunes card shows on the account.

    You need to fix the issue with the credit card on the iTunes account or you can remove the credit card.

  • Hi, Using MAC OSX 10.6.8 and have intermittent issues with receiving new emails - sending is OK. I've tried the workarounds (take offline & take online), quitting mail etc - no luck. Any suggestions?

    Hi, I'm using MAC OSX 10.6.8 and have intermittent issues with receiving new emails - sending is OK. I've tried the workarounds (take offline & take online), quitting mail etc - no luck. Have cleared space, checked Window - Doctor and server has green light.  Mail Activity shows 47 emails waiting to download, iPad and iPhone download them all OK - no extra big files stopping the download either.    In the past, quitting mail has worked, but not today... Any suggestions?

    Hi, I'm using MAC OSX 10.6.8 and have intermittent issues with receiving new emails - sending is OK. I've tried the workarounds (take offline & take online), quitting mail etc - no luck. Have cleared space, checked Window - Doctor and server has green light.  Mail Activity shows 47 emails waiting to download, iPad and iPhone download them all OK - no extra big files stopping the download either.    In the past, quitting mail has worked, but not today... Any suggestions?

  • Facing intermittent issue with findByAltKey api

    We are facing an intermittent issue with findByAltKey while invoking from service in out code and so we want to understand the expected behavior of this api
    the issue is we have an unposted row in the cache which we need to retrieve.So we are doing a findByAltKey and based on the alternate keys it should return the row,but it fails sometimes.
    We noticed while debugging that one of the alternate key attributes that we have defined on our EO is "Name" and the value of name in the EntityCache is sometimes becoming null.As a result of this the alternatekey attributes we pass doesnt match the EO.getAltKey(index) and it in turn doesnt fetch the row.
    This attribute "Name" is present both in the base table and the translation table and there is a view link from parent VO to the TL(translation) VO.
    What we want to understand here is when we do a findByAltKey based on name ,from where does it gets the name from the base vo or translation vo? And is it because of this sometimes this value in the cache is null?
    Can anyone please explain the above issue.

    Hi,
    Which SOA server you are using?
    A & B are synch or Asynch processes?
    Thanks
    Arik

Maybe you are looking for

  • Where do my Adobe CreatePDF Desktop Printer Files Go?

    I've spent hours looking through the Adobe website for a simple answer to a simple question. One reader replied that all you have to do is log on to your account and you will find the document right there.  Good guess, but sorry.  Not so.  Just to te

  • Unknown error compiling movie - tiny sections export fine - no one bad clip

    This week I've been dealing with a huge pain exporting a 6 minute video on my retina macbook pro. The sequence is 720p 24fps (23.976) and contains a mix of 720p & 1080p (scaled) AVCHD footage, a couple of 1080p GoPro shots, some 1080p time-lapse clip

  • How do I import a mp4 disc into my itunes library

    I have MP4 files on a disc and want to import them into my itunes library.  I have tried to drag them, and then I will see the name in the library, however, the file itself does not download, so I cannot play the file without the disc in my computer.

  • Running a database update in the background

    I have a web application which needs to allow the user to run a process in the background. The user needs the ability to kick off a long-running process that will move data from a Sybase database to a datawarehouse. However, since the process may tak

  • Error in DTP creation for a flat file datasource

    Hi SDN friends, Please if somebody can give me a help with this, it will be very appreciate. I have a DTP to load attributes master data into an infoobject. The master data comes from a flat file (data source flat file) . The extraction mode is full,