Intermittent Loss of Audio

I rented Micheal Clayton on HD a couple of days ago (my second HD rental), noticed that the movie playback had intermittent loss of audio whether I set it to DD5.1 or not it made no difference.
The audio loss don't seem to happen at the same scene everytime I rewind and play it back all over again. It seems to happen at random scenes during the movie playback and several times there was no audio for nearly 5 to 10 seconds before it reappears and when I rewind and playback the same scene again, the audio seems to be alright for most parts?
I am wondering if any other users have had similar audio issues with rented movies from iTunes?
This is like my first rental movie which had issues with audio, the previous 3 or 4 rentals did not have any audio nor video issues. It's not my ATV unit either because movies and music videos which I already own, playback on it just fine in DD5.1 via Optical and HDMI. So the issue was just with that one movie which I rented then.
I am wondering how could one demand for a refund from Apple when faced with such problems or issues after the rented movie dissappears from your ATV 24 hours later??
Now I am feeling cautious to rent another movie, what if I have another issue with which ruins the movie experience?
I think I will stick with my PS3 and Blu-Ray for now.

Not sure but I thought I read in another issue that if you connect a TB cable from your Mini into the TB port on the display and the audio/video is OK then that would mean the built-in cable is bad.  I have never tried this so not sure it would work.  Hate to buy a TB cable just to  test because of cost.  The other way would be to take to Apple store and have them check the cable.  It contains miniture IC boards and one could be bad.

Similar Messages

  • When converting from a .wav to a .mov is there a loss of audio quality when using QuickTime?

    When converting from a .wav to a .mov is there a loss of audio quality when using QuickTime?

    When converting from a .wav to a .mov is there a loss of audio quality when using QuickTime?
    That would depend on your work flow. MOV is the generic QuickTime file container and is not related to any particular data compression format. If you perform a simple "Save" or "Save As..." action that merely copies the data in the WAV file to an MOV file, then the data remains unchanged and maintains its original quality. If, on the other hand, your transcode/re-compress the original data to a different compression format, then there is always the potential for some loss in quality. Depending on the codec and/or settings, the potential loss could be inaudible to severe.

  • Intermittant loss of sound

    since i updated the software on my iphone 4 i have intermittant loss of sound i have researched and this is a common problem trouble is no one has an easy fix answer the best suggestion is to revert the phone back to the old software but i have no idea how to do this and apple dont seem to be acknowleging that they messed up with the update so if anyone can help i would be very gratefull
    many thanks

    I have been there and done that.....makes no difference. Why do you think that the all of a sudden it would change the output in the first place? Things don't change by themselves for no apparent reason. It was still on the bose speakers when I went into sys pref. Amazing that you think that it would change itself everyday....did you really read my post or were you distracted?

  • Loss of audio panning effects with timeline audio of Sync type "Stream"

    I have a Flash animation which is loaded into a parent master Flash file. In the animation, there is voice audio embedded in the timeline which is synced with a character animation. The Sync type of the audio is set to Stream, which is essential for the mouth movements to match the audio. When I try to pan the voice audio so that it comes only out of the right speaker, it sounds fine during preview playback, but after publishing, all of the panning effects are lost. If I change the Sync type to "Event" or "Start", the panning effects work fine, but the audio is terribly out of sync with the animation.
    The source audio is a mono audio file. Not sure if that has anything to do with it. I've tried changing the publish settings for both the parent and the child animation Flash files to be Speech, Mp3 mono, Mp3 Stereo and just about every other option, with no desirable results. I have also tried publishing and running the animation without loading it through the parent file, also no results.
    Is there some kind of rule in Flash about Stream versus Event audio and panning? Do I need to use a stereo audio source file? I don't currently have access to the original audio files, but I can get them. Are all Stream type sounds automatically converted to mono at runtime or something??
    Thank you thank you thank you

    According to the Adobe installation information the trial version of Premiere Elements 11 is fully functional and the watermark is only present until a licence code is purchased.
    I have edited AVI footage from a camcorder using the program with no problems (and no loss of audio sync) and the watermark is also present with this.
    The odd placement of audio and video was caused by my not dragging the clip carefully enough.
    What is odd is that the clip plays completely normally using WIndows Media Player and VLC Media player so I would expect Premiere Elements to be able to handle it without problems.
    I think that there is some sort of bug in Premiere Elements' handling of mpe4 files (both in versions 10 and 11) rather than there being anything wrong with my computer.
    Is there some way of communicating this directly to the Adobe programers ?
    I enclose screenshots of the project settings:

  • Exported Final Cut XML from Imovie09 causes loss of Audio Sync

    I have recently upgraded to ILife09 and tried a process that always worked in ILife08 but now get Audio Sync problems.
    I have created an Imovie project that is 2hours and 50 mins long and wanted to export it to Final Cut Express as XML. This used to work 100% with Imovie08. However, with this latest version of Imovie, when exported to Final Cut Express, the first 45 mins of the XML movie is well out of sync (Audio / Visual).
    Has anyone experienced this?

    Hi Roberic,
    there is a bug in iMovie '09 that causes loss of audio sync when you use custom slow/fast motion. This has been experienced by many users. See for example this thread:
    http://discussions.apple.com/thread.jspa?messageID=9152271
    I don't know if this applies to exports to .xml but it could well be that your problem lies here. There are some workarounds, being the easiest one to only use what the slow motion slider snaps to instead of entering custom speed percentages.

  • Loss of audio sync when importing Samsung Galaxy 2 (GT-I1900) video to Premier Elements 10

    I am loosing audio sync when I import video from a Samsung Galaxy 2 GT-I1900 phone even when using settings chosen by Premier Elements 10. 
    The file plays OK in Windows 7 media player.
    I have tried using both direct import from the phone and transferring the file separately without solving the problem.
    The Premier Elements is version 10.0(20110902.Mol11.B123.280463)
    Unlinking the audio and video makes no difference.
    VideoReDo reports the file as :
    File:                                     Name : C:\dcim from samsung\DCIM\Camera\20121121_114639.mp4
                                               Size : 0.886 GB
                                           Duration : 00:09:45.22
                                           Mux type : MP4
    Video:                                Encoding : H.264
                                      VideoStreamID : x201
                                         Frame rate : 29.91 fps
                                      Encoding size : 1280 x 720
                                       Aspect ratio : 16:9
                                    Header bit rate : 20.000 Mbps
                                         VBV buffer : 380 KBytes
                                            Profile : Baseline/4.0
                                        Progressive :  Progressive
                                             Chroma : 4:2:0
                                       Entropy mode : CABAC
                                           Bit rate : 11.626 Mbps
    Audio Stream: 1 (Primary)                Codec : AAC
                                             Format : ADTS
                                           Channels : 2.0
                                           Language : eng
                                                PID : x202
                                      PES Stream Id : xC0
                                      Sampling rate : 48000
    Letting VideoReDo simply rewrite the file resulted in loss of all but the first few seconds of audio. 
    Elements seems to have imported the file as NTSC-AVCHD-AVCHD LITE 720p 30fps
    The computer is running Windows 7 Professional  64 bit version  Service Pack 1 kernel 6.1.7601.17944 (reported by SIW)
    The computer motherboard is a Gigabyte Z68x-UD3H-B3 with an Intel Core i5-2500 CPU at 3.30GHz. Memory is 4GB.
    I note that others have had similar problems with non video recorder recordings.
    Can you suggest any file conversion of the original that will work – I have tried several with no improvement in the final result.
    And can anyone shed light on what is the basic cause of these problems?

    According to the Adobe installation information the trial version of Premiere Elements 11 is fully functional and the watermark is only present until a licence code is purchased.
    I have edited AVI footage from a camcorder using the program with no problems (and no loss of audio sync) and the watermark is also present with this.
    The odd placement of audio and video was caused by my not dragging the clip carefully enough.
    What is odd is that the clip plays completely normally using WIndows Media Player and VLC Media player so I would expect Premiere Elements to be able to handle it without problems.
    I think that there is some sort of bug in Premiere Elements' handling of mpe4 files (both in versions 10 and 11) rather than there being anything wrong with my computer.
    Is there some way of communicating this directly to the Adobe programers ?
    I enclose screenshots of the project settings:

  • Intermittent Loss of Communications with Solaris 10

    With a 32 port Terminal Server, if greater than 28 ports are connected to
    active hardwired patient monitoring devices, our application on
    Solaris 10 experiences intermittent Loss of Comms one port (which a patient device is connect to) at a time. This happens whether or not other terminal servers are attached and has nothing to do with total device load load. We have been able to sustain device loads greater than 60 patients with NO comms loss as long as the 32 port Terminal Server(s) has 28 ACTIVE PORTS OR LESS.
    The Loss of Comms ONLY occurs for devices connected to the 32 port
    Terminal Server with greater than 28 ports connected to active devices.
    This does not occur with Solaris 8. It only occurs with Solaris 10
    11//06.
    Is this a TCP/IP configuration issue?
    I've begun trying to use DTRACE with Provider "mib", but need to narrow
    down the "filtering" to only trace on exactly what is needed to get to the root of this issue.
    Anyone have any ideas?

    I had the same problem. I tried all the obvious stuff (reset etc) and tried some of the random fixes suggested on here.
    Have you tried cleaning all the gunk from the charger port? Mine was clogged with pocket fluff so I got in about it with a tooth pick - problem solved!
    Good luck  :)

  • Rewinding or FFWDing Media Center TV sometimes results in TV Window blacking and loss of audio

    I recently reinstalled Win 7 SP 1 Home Premium 32 bit and I'm still experiencing the subject problem that prompted the reinstall.
    I'll be watching live TV with no problems and then decide to rewind a bit by clicking the rewind button a few times (the more times I click and the more rapidly, the more likely this problem seems to occurr) and the Media Center TV screen/window will sometimes
    'smoothly' go black also sometimes with a loss of audio. The timer shows TV playback is still occurring and then after a while - 5 ~20 seconds, the picture and then eventually, the sound, return. This occurs both in Windowed or Full Screen TV viewing.
    My system details are:
    Intel DG45ID Motherboard with E8500 Core2 Duo 3.16 GHz CPU and using onboard G45 Graphics
    4 GB (2 x 2GB) of compatible Corsair DDR2 RAM
    Compro Technology E900F TV Card (receiving just DVB-T UK Freeview broadcasts)
    4 x 1 TB Samsung HDDs configured in a 2 TB RAID 0+1 Array using native board functionality
    All the latest drivers are installed correctly - chipset, TV card, Grahics, Audio and Intel RST as well as ME software etc. I've also tested with both Playready installed and not installed - with no difference.
    Does anyone know whats causing this or workarounds to cure it please?

    Hello Niki,
    Many thanks for your reply and that very interesting link. I've reviewed that workaround more deeply and it seems to stop the screen blacking/loss of audio problem but according to one of the threads that it originated from here:
    http://answers.microsoft.com/en-us/windows/forum/windows_other-tv/losing-soundpicture-when-rewinding-live-tv-in/6e0f575a-4bed-4248-9cac-a6392b7b6d16 , the 'fix' also disables MHEG 5 Functionality, which for me, as a UK user of the BBC Red Button and other
    interactive services, is NOT acceptable. The BBC have recently ceased their Ceefax (Teletext) service which has been superceded by the red button MHEG-5 based service so bug free MHEG-5 is our only option.
    I see that the other thread I linked to has had no official comment from Microsoft - as a Moderator here (clearly someone with connections/influence at Microsoft to at least some degree) will you kindly pass this up the chain to be fully and properly addressed
    please Niki? Otherwise maybe someone who is responsible for this field at Microsoft would care to comment here (and over on that other Microsoft thread that's been awaiting their input for some time)??
    I realise that
    MHEG 5 , despite being an international standard, isn't utilised all around the world (notably not in the USA) so I hope this doesn't affect Microsofts prioritisation of providing a proper fix to this issue.

  • Vexing intermittent loss of Internet

    For about six weeks now I have been experiencing a troubling intermittent loss of Internet service. It's like on, off, on, off, on, off, etc. It changes minute to minute. I click on a link and get a message saying the web site can't be reached, try reloading.
    Then I'll click on the link and Internet is back. Three or four minutes later its on again, then off again, etc.
    I'm on my third or fourth modem/wireless router, the last one being installed by a Verizon tech. When the problem continued they sent another tech who replaced my ONT. Still the problem persists.
    This loss of Internet occurs when using my hard wired desktop and wireless laptops used  by me and others in the house.
    Don't know what to do next except maybe go back to Cablevision.
    We're talking northern Westchester County, N.Y.

    I'm sorry you are having difficulty. An agent with access to your account will reach out to you directly by email, private message in the Forums and/or the billing telephone number on your Verizon account for more information or to help you resolve your issue.

  • Intermittent loss of connection

    For about a week now I have been suffering from a intermittent loss of connection to the internet the internet will be fine until it randomly decides to drop out. Usually I'll be surfing the website and go to navigate to another webpage when it times out and tells me it couldn't find the website in question. My games seems to be affected as well though it is more common for me to observe this in my browser the problem occurs in Firefox and I loaded Chrome as well one day and the problem appears there as well. I need some line quality tests with dslreports.com's line quality test and I did four of them they all reported intermittent packet loss the odd thing I noticed is in all four tests I did the same node suffered a varying amount of packet loss (ae-1-60.edge1.SanJose3.Level3.net) I have been trying to get some info on this server but I can't seem to find any info on it whatsoever I have included all four tests in the zip archive attached to this post.
    I also did a fifth test which I included as well I did this test after resetting the router and did another test but it was much of the same. Please tell me how to troubleshoot this problem I am losing my mind and patience.
    Line Quality Test 1
    Line Quality Test 2
    Line Quality Test 3
    Line Quality Test 4
    Line Quality Test 5

    I've been having a simliar issue as well for about a month now where my internet drops out every now and then for several seconds and then comes back up. This only started happening after Hurricane Sandy in Staten Island, NY when my ONT had to be replaced after being flooded. Since then, I have already had my ONT replaced twice and was given a new REV I router and told to not send back my old REV D router which never had any problems before. I have even tried putting back the REV D router and I still kept losing internet every now and then. After multiple chats with Verizon, they seem to have pinpointed the problem to be a physical issue in my house. So, I tried connecting the REV I router directly to the ONT, via coax, and I still noticed the internet dropping. Looking at the router logs, I noticed the following entries every now and then (usually multiple times a day):
    Jan 10 00:29:15 2013
    System Log
    WAN ETH
    WAN Ethernet Link Up
    Jan 10 00:29:14 2013
    System Log
    WAN Coax
    WAN Coax Link Up
    Jan 10 00:29:10 2013
    System Log
    WAN ETH
    WAN Ethernet Link Down
    Jan 10 00:29:10 2013
    System Log
    WAN Coax
    WAN Coax Link Down
    and
    Jan 8 04:35:26 2013
    System Log
    WAN Coax
    WAN Coax Link Up
    Jan 8 04:35:26 2013
    System Log
    WAN ETH
    WAN Ethernet Link Up
    Jan 8 04:33:42 2013
    System Log
    WAN ETH
    WAN Ethernet Link Down
    Jan 8 04:33:41 2013
    System Log
    WAN Coax
    WAN Coax Link Down
    Looking at the advanced logs I ocassionally find the following entries associated with the link flapping:
    2013/01/08 04:33:44.12 M mt_igmp_params_init:223: reconf: new lan interface: br0, ver 3
    2013/01/08 04:33:44.12 M mt_igmp_params_init:235: reconf: new wan interface: eth1
    2013/01/08 04:33:44.20 M clink1: link down, device will be down
    2013/01/08 04:33:44.24 M lan if uninit br0
    2013/01/08 04:33:44.24 M removing multicast group 224.0.0.1 from device br0 port 16
    2013/01/08 04:33:44.24 M removing multicast group 224.0.0.1 from device br0 port 8
    2013/01/08 04:33:44.24 M removing multicast group 224.0.0.1 from device br0 port 4
    2013/01/08 04:33:44.24 M removing multicast group 224.0.0.1 from device br0 port 2
    2013/01/08 04:33:44.24 M removing multicast group 224.0.0.1 from device br0 port 1
    2013/01/08 04:33:44.24 M removing multicast group 224.0.0.1 from device br0 port 0
    2013/01/08 04:33:44.24 M uninit igmp proxy module
    2013/01/08 04:33:44.24 M init igmp proxy module
    2013/01/08 04:33:44.24 M lan if init br0
    2013/01/08 04:33:44.24 M adding multicast group 224.0.0.1 to device br0 port 0
    2013/01/08 04:33:44.24 M adding multicast group 224.0.0.1 to device br0 port 1
    2013/01/08 04:33:44.24 M adding multicast group 224.0.0.1 to device br0 port 2
    2013/01/08 04:33:44.24 M adding multicast group 224.0.0.1 to device br0 port 4
    2013/01/08 04:33:44.24 M adding multicast group 224.0.0.1 to device br0 port 8
    2013/01/08 04:33:44.24 M adding multicast group 224.0.0.1 to device br0 port 16
    2013/01/08 04:33:44.31 M jan  8 04:33:43 syslog: check_exit: exiting
    2013/01/08 04:33:45.10 M igmprx_lan_port_add_single: ifname=br0  ifindex=9
    2013/01/08 04:33:45.10 M igmprx_lan_port_add_single: ifname=eth0  ifindex=2
    2013/01/08 04:33:45.10 M igmprx_lan_port_add_single: ifname=eth0  ifindex=2
    2013/01/08 04:33:45.10 M igmprx_lan_port_add_single: ifname=eth0  ifindex=2
    2013/01/08 04:33:45.10 M igmprx_lan_port_add_single: ifname=eth0  ifindex=2
    2013/01/08 04:33:45.10 M igmprx_lan_port_add_single: ifname=eth0  ifindex=2
    2013/01/08 04:33:45.10 M @@ setting new value completed, it should show new value in proc/proxy
    2013/01/08 04:33:45.12 M mt_igmp_params_init:223: reconf: new lan interface: br0, ver 3
    2013/01/08 04:33:45.20 M eth1: link down, device will be down
    2013/01/08 04:33:45.26 M lan if uninit br0
    2013/01/08 04:33:45.28 M removing multicast group 224.0.0.1 from device br0 port 16
    2013/01/08 04:33:45.28 M removing multicast group 224.0.0.1 from device br0 port 8
    2013/01/08 04:33:45.28 M removing multicast group 224.0.0.1 from device br0 port 4
    2013/01/08 04:33:45.28 M removing multicast group 224.0.0.1 from device br0 port 2
    2013/01/08 04:33:45.28 M removing multicast group 224.0.0.1 from device br0 port 1
    2013/01/08 04:33:45.28 M removing multicast group 224.0.0.1 from device br0 port 0
    2013/01/08 04:33:45.28 M uninit igmp proxy module
    2013/01/08 04:33:45.28 M init igmp proxy module
    2013/01/08 04:33:45.28 M lan if init br0
    2013/01/08 04:33:45.28 M adding multicast group 224.0.0.1 to device br0 port 0
    2013/01/08 04:33:45.28 M adding multicast group 224.0.0.1 to device br0 port 1
    2013/01/08 04:33:45.28 M adding multicast group 224.0.0.1 to device br0 port 2
    2013/01/08 04:33:45.28 M adding multicast group 224.0.0.1 to device br0 port 4
    2013/01/08 04:33:45.28 M adding multicast group 224.0.0.1 to device br0 port 8
    2013/01/08 04:33:45.28 M adding multicast group 224.0.0.1 to device br0 port 16
    2013/01/08 04:33:46.10 M igmprx_lan_port_add_single: ifname=br0  ifindex=9
    2013/01/08 04:33:46.10 M igmprx_lan_port_add_single: ifname=eth0  ifindex=2
    2013/01/08 04:33:46.10 M igmprx_lan_port_add_single: ifname=eth0  ifindex=2
    2013/01/08 04:33:46.10 M igmprx_lan_port_add_single: ifname=eth0  ifindex=2
    2013/01/08 04:33:46.10 M igmprx_lan_port_add_single: ifname=eth0  ifindex=2
    2013/01/08 04:33:46.10 M igmprx_lan_port_add_single: ifname=eth0  ifindex=2
    2013/01/08 04:33:46.10 M eth1: stopped
    2013/01/08 04:33:46.10 M eth1: mac address changed
    2013/01/08 04:33:46.10 M port 0: setting mac to 0x1, status: 0x2c3d
    2013/01/08 04:33:46.10 M eth1: link up
    2013/01/08 04:33:46.10 M eth1: started
    2013/01/08 04:35:27.24 M eth1: link up, device will be up
    2013/01/08 04:35:27.54 M clink1: lof 1000mhz
    2013/01/08 04:35:27.55 M mt_igmp_params_init:223: reconf: new lan interface: br0, ver 3
    2013/01/08 04:35:27.63 M clink1: link up, device will be up
    2013/01/08 04:35:27.63 M lan if uninit br0
    2013/01/08 04:35:27.63 M removing multicast group 224.0.0.1 from device br0 port 16
    2013/01/08 04:35:27.63 M removing multicast group 224.0.0.1 from device br0 port 8
    2013/01/08 04:35:27.63 M removing multicast group 224.0.0.1 from device br0 port 4
    2013/01/08 04:35:27.63 M removing multicast group 224.0.0.1 from device br0 port 2
    2013/01/08 04:35:27.63 M removing multicast group 224.0.0.1 from device br0 port 1
    2013/01/08 04:35:27.63 M removing multicast group 224.0.0.1 from device br0 port 0
    2013/01/08 04:35:27.63 M uninit igmp proxy module
    2013/01/08 04:35:27.63 M init igmp proxy module
    2013/01/08 04:35:27.63 M lan if init br0
    2013/01/08 04:35:27.63 M adding multicast group 224.0.0.1 to device br0 port 0
    2013/01/08 04:35:27.63 M adding multicast group 224.0.0.1 to device br0 port 1
    2013/01/08 04:35:27.63 M adding multicast group 224.0.0.1 to device br0 port 2
    2013/01/08 04:35:27.63 M adding multicast group 224.0.0.1 to device br0 port 4
    2013/01/08 04:35:27.63 M adding multicast group 224.0.0.1 to device br0 port 8
    2013/01/08 04:35:27.63 M adding multicast group 224.0.0.1 to device br0 port 16
    2013/01/08 04:35:28.10 M igmprx_lan_port_add_single: ifname=br0  ifindex=9
    2013/01/08 04:35:28.10 M igmprx_lan_port_add_single: ifname=eth0  ifindex=2
    2013/01/08 04:35:28.12 M igmprx_lan_port_add_single: ifname=eth0  ifindex=2
    2013/01/08 04:35:28.12 M igmprx_lan_port_add_single: ifname=eth0  ifindex=2
    2013/01/08 04:35:28.12 M igmprx_lan_port_add_single: ifname=eth0  ifindex=2
    2013/01/08 04:35:28.12 M igmprx_lan_port_add_single: ifname=eth0  ifindex=2
    2013/01/08 04:35:36.79 M mt_igmp_params_init:223: reconf: new lan interface: br0, ver 3
    2013/01/08 04:35:36.79 M mt_igmp_params_init:235: reconf: new wan interface: eth1
    2013/01/08 04:35:36.85 M dhcp client: wan ethernet renew ip address: 173.56.37.223
    2013/01/08 04:35:36.85 M dhcp client: wan ethernet renew netmask: 255.255.255.0
    2013/01/08 04:35:36.85 M dhcp client: wan ethernet renew gateway: 173.56.37.1
    2013/01/08 04:35:36.85 M dhcp client: wan ethernet renew dns server: 208.67.222.222 208.67.220.220
    2013/01/08 04:35:36.90 M lan if uninit br0
    2013/01/08 04:35:36.90 M removing multicast group 224.0.0.1 from device br0 port 16
    2013/01/08 04:35:36.90 M removing multicast group 224.0.0.1 from device br0 port 8
    2013/01/08 04:35:36.90 M removing multicast group 224.0.0.1 from device br0 port 4
    2013/01/08 04:35:36.90 M removing multicast group 224.0.0.1 from device br0 port 2
    2013/01/08 04:35:36.90 M removing multicast group 224.0.0.1 from device br0 port 1
    2013/01/08 04:35:36.90 M removing multicast group 224.0.0.1 from device br0 port 0
    2013/01/08 04:35:36.90 M uninit igmp proxy module
    2013/01/08 04:35:36.90 M init igmp proxy module
    2013/01/08 04:35:36.90 M lan if init br0
    2013/01/08 04:35:36.90 M adding multicast group 224.0.0.1 to device br0 port 0
    2013/01/08 04:35:36.90 M adding multicast group 224.0.0.1 to device br0 port 1
    2013/01/08 04:35:36.90 M adding multicast group 224.0.0.1 to device br0 port 2
    2013/01/08 04:35:36.91 M adding multicast group 224.0.0.1 to device br0 port 4
    2013/01/08 04:35:36.91 M adding multicast group 224.0.0.1 to device br0 port 8
    2013/01/08 04:35:36.91 M adding multicast group 224.0.0.1 to device br0 port 16
    2013/01/08 04:35:36.91 M out: [62] nat error: no free nat ip ([62] nat error: no free nat ip: )
    2013/01/08 04:35:37.19 M igmprx_lan_port_add_single: ifname=br0  ifindex=9
    2013/01/08 04:35:37.19 M igmprx_lan_port_add_single: ifname=eth0  ifindex=2
    2013/01/08 04:35:37.19 M igmprx_lan_port_add_single: ifname=eth0  ifindex=2
    2013/01/08 04:35:37.19 M igmprx_lan_port_add_single: ifname=eth0  ifindex=2
    2013/01/08 04:35:37.19 M igmprx_lan_port_add_single: ifname=eth0  ifindex=2
    2013/01/08 04:35:37.19 M igmprx_lan_port_add_single: ifname=eth0  ifindex=2
    2013/01/08 04:35:37.19 M @@ setting new value completed, it should show new value in proc/proxy
    2013/01/08 04:35:47.83 M acs ack: event = 4 value change
    I setup syslog on the router which feeds it to the WallWatcher application and this is all the details I get duing the flap. I'm really stumped by this and can't figure out what the problem is. Could it be a bad PON card? I noticed that the logs show only the WAN Coax going down without the LAN Coax which leads me to believe in a faulty connection between the router and the ONT. I've already tried connecting both routers directly to the ONT to no avail. The only changes that I can think of since Sandy are the electrical outlets that were replaced. Could they be causing some kind of interference? I've tried running the coax with and without the ground block, but that didn't help either. The only thing that was not replaced since the first post-Sandy installation is the ONT battery system, only the battery itself was replaced once. Could that be it? Just to be clear, I have always been connected via coax and I have tried testing with different cables.

  • Intermittent loss of internet connection on Homehu...

    Hi Everyone
    I have recently taken out a new contract with BT and connected my new Homehub 4 on the 14th February.  Seemly it was okay for at least 5 days then I started to experience some intermittent loss of internet on all of the devices, i.e PC, laptop, xbox, it effected both wired and wireless.  The hub was showing orange light, which then prompt me to press the reset/restart button on top of the hub.
    I have try out my old Homehub 1 for 3 days to see if it effected that one too, but the hub 1 was perfect in term of no loss of connection for 3 day.
    Then I connect homehub 4 again on Fri 28th February it was okay for a day, except on 1st march in the morning hub seem to disconnect/reconnect itself. Then around 2310 pm I have loss all connection to the internet through all of my devices again.
    Does anyone know what this problem is?  It is to do with BT-Wifi Fon, or is the hub 4 faulty and need replacing?
    Many Thanks

    It was orange central broadband light, there were no other light showing on the silver part.
    I have not tried test socket yet, however, I did have a new master socket and line replaced couple year ago, so it would have the new faceplate on there. Plus, the external line etc must be working since hub 1 was working perfectly.
    Here the information from speed test
    Download  Speed:        1.98 Mbps
    0 Mbps 2 Mbps
    Max Achievable Speed
     Download speed achieved during the test was - 1.98 Mbps
     For your connection, the acceptable range of speeds  is 0.4 Mbps-2 Mbps.
     Additional Information:
     Your DSL Connection Rate :2.3 Mbps(DOWN-STREAM), 0.45 Mbps(UP-STREAM)
     IP Profile for your line is - 2 Mbps
    23:17:22, 01 Mar.           ( 86.310000) DSL noise margin: 17.00 dB upstream, 10.20 dB downstream
    23:17:22, 01 Mar.           ( 86.130000) DSL line rate: 448 Kbps upstream, 2304 Kbps downstream
    Any idea what this mean on the event log? I seem to keep getting PPP LCP send conf request.
    23:17:26, 01 Mar.           ( 89.940000) PPP LCP Send Configuration Request
    23:17:15, 01 Mar.           ( 78.760000) CWMP: session closed due to error: Could not resolve host

  • Intermittent Sound Loss (SFX & Audio)

    Hi gang, I have an odd problem with intermittent sound loss (button SFX + audio) on my brand new ATV2 (HDMI to HDMI on a 2 year old Phillips 42"). The picture is great, but the audio only works about 50% of the time. (?!) I'm totally stumped. I did some troubleshooting. Restart, Reset, Restore. No dice. I swapped the cable and tried different HDMI ports — to no avail. I also spent an hour on the phone with an Apple tech. We did everything again and we turned off Dolby, etc. No dice. He suggested I bring the device into the Apple store, and they swapped it out for me. But I'm having the same problem with the new device — and AGAIN only 50% of the time. It seems totally arbitrary. Very frustrating. Any ideas would be appreciated.

    Did you try restarting your TV, the problem may be there.
    (I have a tv that starts to drop audio occasionally, although a restart of the tv will resolve the matter it does return perhaps weeks/months later)

  • Keynote to iDVD: loss of audio in slide show

    I have made a slide show on Keynote with music from iTunes. I export it to iDVD and it works fine from the computer while in iDVD. When I burn the disc, the music from the Keynote slideshow is missing although musc that I have added to menus does play. I want to use the Keynote slideshow and not transfer it to iMovie then iDVD because of loss of quality. I do not want to use the slideshow from iDVD because Keynote provides more opprtunities for effects in the slide show as well as clearer text. I think the problem has something to do with the fact that when I export, on my desktop is a copy of the slideshow AND a copy of the soundtrack.mov. How can I get them together? THANKS!!!

    Thanks for the help but I faced the same problem as others with iMovie. Also I am trying to avoid the use of iMovie because the final product, a QT from iMovie, is not as clear visually as an import from Keynote - graphics are a lot muddier. I would have to agree that, as much as I LOVE Keynote, the inability to simply export a slide show with audio intact certainly is a problem with Keynote.
    Also disappointed,
    Jim
    (Please excuse cross postings. I am just getting used to this Discussion format.)

  • Loss of audio after upgrade os x 10.7.5, reset PRAM, SMS, updated software and other recommendations i could find. Master volume sliders inactive in Audio Midi section. Can see sound bar responding it input on line in but is not being internally routed.

    Recently upgrade to OS x 10.7.5 resulted in loss of what appears to be internal communication of line in audio, and output. Have tired several remedies including resetting PRAM, SMS, updating all software, multiple Sound and Audio Midi applications adjustments to no avail. Also no audio is recognized on USB mixing board I tried as well, though Audio USB Codec was displayed. THe master volume sliders and other options are greyed out on Audio Midi application whn I try to troubleshoot that. Nothing external will play through computer speakers, but internal sounds and iTunes play normally.I made sure the audio sampling rates were default. Software issue or soundcard/hardware failure.?..Pullin my hair out!

    Might be corrupted sound preferences ...
    Open the Finder. From the Finder menu bar click Go > Go to Folder
    Type or copy paste the following;
    /Library/Preferences/Audio
    Click Go then move both .plist files from the Audio folder to the Trash.
    com.apple.audioDeviceSettings.pllist
    com.apple.audio.SystemSettings.plist
    Restart your Mac. See if that made a difference ...

  • Loss of audio sync

    I use FC Pro 5.0.4 with the video card Digital Voodoo D1 64 RT (driver 7.5) and with the sound card AES-32 of RME, because in the past I've had problems with the audio section of Voodoo (many pops and clicks). Both are connected to a Leitch SPG-1601, one to BB out and the other to word clock out. The capture is OK but when I edit to tape I have a random loss of sync of 2 or 3 frames, the audio comes first than video. When I edit to tape FC PRO show me this warning:
    The selected audio and video devices may not match:
    - Digital Voodoo.....
    - Hammerfall DSP AES-32
    Please verify that the audio and video outputs are externally routed to the intended device(s). Do you want to proceed?
    The settings on the RME for me are correct and also on the Voodoo.
    I don't know what to do. Please help me.
    Power Mac G5   Mac OS X (10.4.5)   2 x 2 Ghz, 3 GB RAM, Quicktime 7.0.4
    Power Pc G5   Mac OS X (10.4.5)  

    It appears it occurs when you use an external monitor. If you turn the monitor off it syncs up.

Maybe you are looking for