Intermittent Loss of Communications with Solaris 10

With a 32 port Terminal Server, if greater than 28 ports are connected to
active hardwired patient monitoring devices, our application on
Solaris 10 experiences intermittent Loss of Comms one port (which a patient device is connect to) at a time. This happens whether or not other terminal servers are attached and has nothing to do with total device load load. We have been able to sustain device loads greater than 60 patients with NO comms loss as long as the 32 port Terminal Server(s) has 28 ACTIVE PORTS OR LESS.
The Loss of Comms ONLY occurs for devices connected to the 32 port
Terminal Server with greater than 28 ports connected to active devices.
This does not occur with Solaris 8. It only occurs with Solaris 10
11//06.
Is this a TCP/IP configuration issue?
I've begun trying to use DTRACE with Provider "mib", but need to narrow
down the "filtering" to only trace on exactly what is needed to get to the root of this issue.
Anyone have any ideas?

I had the same problem. I tried all the obvious stuff (reset etc) and tried some of the random fixes suggested on here.
Have you tried cleaning all the gunk from the charger port? Mine was clogged with pocket fluff so I got in about it with a tooth pick - problem solved!
Good luck :)

Similar Messages

Is anyone else experiencing arbitrary loss of communication with peripherals (like back-up disk)

Is anyone else experiencing arbitrary loss of communication with peripherals (like back-up disk)? The problem on my iMac also seems to involve my HP 2355 printer which ghost-enlivens periodically and resets itself like it has lost power or communication with the computer. I had the same problem on my MacBook Pro. I couldn't figure out why the printer screen was lit up when no one was using the computer. The loss of communication with the back-up disk also happened on the Pro. Two different Apple models; two different computers; two different back-up systems; two different printers. So, I am thinking it is not limited to one computer or computer type or printer.

None of the issues you describe occur on my iPad in iOS 5.
To begin with, reset your iPad: Press and hold the Sleep/Wake + Home buttons at the same time, until you see the Apple logo appear.

Need simple class for communicating with Solaris account

Hey, gang. After over a week of searching this forum and the Web for a solution, I'm stuck. I hope someone here can help.
I've got a Java application intended to run on both Windows and Solaris systems that needs to perform the following automated operations:
1. Connect to a user account on a Solaris server.
2. Login.
3. Run an sccs command.
4. Retrieve the output from the sccs command.
I can run commands (such as sccs) directly from Java; I've worked out how to do that. My situation is that I need to run sccs from an authorized account so that all file checkin/checkout operations are tagged properly. So the requirement to connect to a server isn't one I can ignore. I also don't need a full-up interactive client interface -- this needs to be an automated process.
What I'm hoping is that someone here will be willing to provide (or point me to) some relatively simple source code I can call to do this stuff. Maybe an example of a class that uses Socket and a couple of streams to programmatically connect to a server, send commands, and capture input. That's really all I need.
I've tried calling the Jakarta Commons telnet class to connect to the Solaris server, but it's more overhead than I need. (Plus the input stream kept blocking when I tried to use it in a purely automated mode.) I've also tried rolling my own code using the minimal info available on Google, but have not been able to figure out the magic words necessary to get anything back but gibberish. (InputStream and BufferedReader just do not seem to want to cooperate. Either I get back only garbage text, or readLine() or read() gets nothing and just sits and waits until the timeout.)
So I turn to the experts here. If anyone can offer (or direct me to) any simple, non-libraried source code that enables my Java code to connect to and talk to a Solaris machine, I'd be grateful.
Thanks!

I was hoping a separate server-side process wouldn't be needed -- if you're thinking of something like RMI, that's also a bit heavyweight for my needs. I know I can talk to the remote server on telnet port 23, though.
Further experimentation today with the Jakarta net library has generated something that works using their telnet classes. (After I asked for help here, of course. The same thing happens when I shop for groceries....) But using this leaves me referencing an external library that:
1. has functionality I don't need that complicates the code, and
2. forces me to address licensing requirements.
So I'd still love to see an example of a telnet-like Java class that strips away all the non-essentials in the Jakarta telnet library code, leaving behind a simple public domain class that can be used to connect to a remote host and transfer characters over that connection.
I appreciate that this may be asking for a lot, but as they say, if you don't ask, you don't get. ;-)
Thanks!

Loss in communication with Airport and iTUNES stopping!

I have had a problem with iTUNES and my Airport Express since I first got them and it has been getting worst. There are two different, but perhaps related symptoms. The first is that everything is working fine and then the song stops playing. Sometimes only for a few seconds or sometimes indefinitely. The second problem is iTUNES can't connect with the Airport or losses the connection. This is especially confusing because the Airport is located only 4 feet away form the computer in a cabinet with my amplifier and home stereo.
My remedies vary form simply restarting iTUNES, running One Button Checkup on Norton Systemworks, rebooting Windows and/or turning power of at Airport.
iTUNES version 6.0.4.2, is running on an HP Pavilion ze5375, pentium 4 @ 2.4ghz with Windows XP Home edition. Airport Utility is version 4.2 and is connected by cable to a Sony stereo amplifier.
Any help would be appreciated.
HP Pavilion ze5375 Windows XP

hiya!
hmmmmm. is the Airport connection dropping at the same time as you get the songs stop playing on the PC?
if so, perhaps let's try attacking that issue first.
have you worked through the possibilities from this document?
AirTunes audio stream drops or cuts out
love, b

VS Exp 2013: Unable to create the Web site ... The components for communicating with FTP servers are not installed.

I have MS Visual Studio Express 2013 It has worked fine for many months and then suddenly (I have made no configuration changes or added new programs) when I try to publish I am getting the message:
Unable to create the Web site 'ftp://ftp.xx.xx/xxx.org.uk/www/htdocs'. The components for communicating with FTP servers are not installed.
(I have replaced actual name with x's).
I had a similar problem some months ago and found that saving all files, closing VS 2013 and re-starting the program fixed the problem. This time it has not.
I am at a loss to know how to take this forwards. I do not use IIS.
Any help would be appreciated.
Michael.

Hi Michael,
For web site development, so you use the VS2013 express for web, am I right? We have to make sure that it is not the VS version issue.
As you said that it worked well before, did you install other add-ins or tools in your VS IDE like
Xamarin or others?
Maybe you could disable or remove all add-ins in your VS IDE, test it again.
please also install the VS2013 update 4 in your side.
Best Regards,
Jack
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Experience with Solaris 10 Memory Management

Dear Forum!
Using Note 724713 we installed a couple of R3 Systems on Solaris 10. Independently which R3 Version is used we observe much more memory problems as with prior solaris releases or other operating systems like AIX.
For instance1: We moved three R3 Systems from a server with solaris 8 to a server with solaris 10. We didnt change memory parameters of R3 and the databases (oracle). The solaris 10 server has the same amount of memory (8GB) like the solaris 8 server. Now, on the solaris 10 server we can only start two R3 systems, the third one doesnt start because no memory can be allocated. The memory parameter of all component slightly overload the main memory. Because the systems are not productive they mostly idle and performance loss due to paging and even swapping didnt worry us. Not even that the third system didnt start, the whole OS was a kind of freezed and no more work was possible, also not on the other two R3 systems which were already startet.
For instance2:
On another server with 16GB memory we startet an installation of a sapsystem and the sapinst crashed due to memory absence. Admittedly, here the main memory was also a bit overloaded, but this is not unusal here and I never saw sapinst crashing because of this.
In both cases Swapspace was adequate.
Do you have similar experiences? Or any tipps to solve the problem.
Thanks
Andreas

this is strange. Although /etc/user_attr shows
/etc/user_attr shows
adm::::profiles=Log Management
lp::::profiles=Printer Management
postgres::::type=role;profiles=Postgres Administration,All
root::::auths=solaris.*,solaris.grant;profiles=Web Console Management,All;lock_after_retries=no;min_label=admin_low;cle
arance=admin_high
qp7adm::::project=QP7
oraqp7::::project=QP7
sapadm::::project=QP7
smdadm::::project=QP7
the process list show that the processes of the user sidadm run in project "system" only the oracle user project is ok:
root@pi7q # ps -eo user,pid,ppid,project,args
    USER   PID PPID PROJECT COMMAND
oraqp7 1783 3652      QP7 ora_q001_QP7
oraqp7   125 3652      QP7 ora_mmon_QP7
qp7adm 1884 1862   system dw.sapQP7_DVEBMGS00 pf=/usr/sap/QP7/SYS/profile/QP7_DVEBMGS00_pi7q
oraqp7 20464 3652      QP7 oracleQP7 (LOCAL=NO)
daemon 4416 3652   system /usr/lib/nfs/nfs4cbd
qp7adm 1870 1862   system icman -attach pf=/usr/sap/QP7/SYS/profile/QP7_DVEBMGS00_pi7q
oraqp7 20462 3652      QP7 oracleQP7 (LOCAL=NO)
    root 14658 25510 user.root bash
oraqp7   105 3652      QP7 ora_dbw1_QP7
oraqp7 2980 3652      QP7 oracleQP7 (LOCAL=NO)
    root 5819 3652   system ./tGAgent.d -d
oraqp7 2544 3652      QP7 oracleQP7 (LOCAL=NO)
smdadm 5639 3652   system /usr/sap/SMD/SMDA02/exe/sapstartsrv pf=/usr/sap/SMD/SYS/profile/SMD_SMDA02_pi7q
qp7adm 1900 1862   system dw.sapQP7_DVEBMGS00 pf=/usr/sap/QP7/SYS/profile/QP7_DVEBMGS00_pi7q
    root 4443 3668   system /usr/lib/saf/sac -t 300

Help DSCC agent not communicating with AppServer or Tomcat?!

Installing Directory Server Enterprise Edition 6.3 From Zip Distribution on system running Solaris10 11/08.
Cannot get DSCC to work with either AppServer or Tomcat.
Both AppServer & Tomcat deploy DSEE WAR file and I can look at things that I have manually registered via command line. Cacao agent is running it is just not communicating with AppServer or Tomcat so it cannot commit any actions such as starting and stopping directory instances or creating new directories instances within the web app.
Is this a bug that occurs only when doing a new install using the Zip Distribution?
The Error message I get regardless if Appserver or Tomcat is:
"Could not contact the DSCC agent on <server>. Use the command cacaoadm to check that the DSCC agent is installed and running on port 11169."
I changed to port 11169 because it had a conflict on default port 11162.
Output from cacaoadm & dsccsetup commands is follows:
root@dsee:/ $ /local/dsee6/cacao_2/usr/lib/cacao/bin/cacaoadm status
default instance is DISABLED at system startup.
Smf monitoring process:
8423
8424
Uptime: 0 day(s), 0:47
root@dsee:/ $ /local/dsee6/cacao_2/usr/lib/cacao/bin/cacaoadm list-params
snmp-adaptor-port=11161
snmp-adaptor-trap-port=11162
jmxmp-connector-port=11169
commandstream-adaptor-port=11163
rmi-registry-port=11164
secure-webserver-port=11165
java-flags=-Xms4M -Xmx128M -Dcom.sun.management.jmxremote -Dfile.encoding=utf-8
java-home=/local/jre
jdmk-home=/local/dsee6/private
nss-lib-home=/local/dsee6/private/lib
nss-tools-home=/local/dsee6/bin
retries=4
enable-instrumentation=false
network-bind-address=0.0.0.0
root@dsee:/ $ /local/dscc6/bin/dsccsetup status -v
## /local/webconsole/usr/sbin/smreg/smreg is MISSING
## /local/webconsole/usr/sbin/smcwebserver/smcwebserver is MISSING
## /local/dscc6/dccapp is present
Sun Java (TM) Web Console is not installed
## /local/dsee6/cacao_2/usr/lib/cacao/bin/cacaoadm is present
## /local/dsee6/cacao_2/.configured is present
## /local/dscc6/lib/jar/nquickmodule.jar is present
## Running /local/dsee6/cacao_2/usr/lib/cacao/bin/cacaoadm list-modules -r
DSCC Agent is registered in Cacao
## Running /local/dsee6/cacao_2/usr/lib/cacao/bin/cacaoadm status
## Running /local/dsee6/cacao_2/usr/lib/cacao/bin/cacaoadm list-modules
## Running /local/dsee6/cacao_2/usr/lib/cacao/bin/cacaoadm get-param network-bind-address
## Running /local/dsee6/cacao_2/usr/lib/cacao/bin/cacaoadm get-param jmxmp-connector-port
Cacao uses a custom port number (11169)
## /local/ds6/bin/dsadm is present
DSCC Registry has been created
Path of DSCC registry is /local/var/dscc6/dcc/ads
Port of DSCC registry is 3998
Any work around or ideas on how to get DSCC working?
Thanks!

I started over and installed Glassfish and everything just worked. After the fact I think the real problem was related to the server.policy file. I think this was the problem because using the default appserver 8.2 that comes with Solaris has a different path and I got this same error when tried using tomcat also. When installing glassfish it uses this default path as in the server.policy example as follows so it just worked.
Add the following lines in the {install-dir}/domains/domain1/config/server.policy file
// Permissions for Directory Service Control Center
grant codeBase "file:${com.sun.aas.instanceRoot}/applications/j2ee-modules/DSCC/-"
permission java.security.AllPermission;
Hope this helps some as I was really stuck and confused at the time and just started playing with the stuff. Growing pains. Thanks to those that replied.
Thanks!
Wences

Error when communicating with server, and locked fields

Hi there,
I am having a really weird, and annoyingly intermittent, problem.
I'm trying to write a single value to my application via an Input EVDRE, for testing purposes. I've been doing this all morning (admittedly to a different application set but still...) but this time when I "send and refresh", it takes ages before coming back with this error:
"An error has occurred while communicating with the server"
Further more, if I look at the table "dbo.lckFinance" there is now a locked field in the database for this specific category and time. So a user without access to a DBA (or the database, in my case!) would be stuck now - even if the communication problem was solved, they couldn't post anyway.
The application is not part of appshell, we are running BPC version 7.0.112 on SQL Server 2005.
I've looked in the Event Viewer on the server and found nothing untoward there.
Any idea what is happening and how I can avoid this in future? The communication thing is obviously a problem, but I'm just as concerned by the locking.
Please help!
Many thanks,
Jason

Hi Jason,
If you have problems with the network this has to be solved.
I don't think we can have a software working if a cable was unplug ).
We advice our customer to use citrix servers in case if the latency into network is high (more than 200 ms) and of course in case of loosing packages.
But I don't think the problem in your case is related to the network.
It seems in your case it was a problem of send governor.
This can have problem when the cube and dimension are not syncronize or you have an error in one of dimensions.
Also can you check the table sgqueue if you have any record there when nobody is sending data?
If you have records there then you have to delete these records.
Check also tbl"your application"lock if you have records.
Regards
Sorin Radulescu

Intermittant loss of sound

since i updated the software on my iphone 4 i have intermittant loss of sound i have researched and this is a common problem trouble is no one has an easy fix answer the best suggestion is to revert the phone back to the old software but i have no idea how to do this and apple dont seem to be acknowleging that they messed up with the update so if anyone can help i would be very gratefull
many thanks

I have been there and done that.....makes no difference. Why do you think that the all of a sudden it would change the output in the first place? Things don't change by themselves for no apparent reason. It was still on the bose speakers when I went into sys pref. Amazing that you think that it would change itself everyday....did you really read my post or were you distracted?

Intermittent Loss of Audio

I rented Micheal Clayton on HD a couple of days ago (my second HD rental), noticed that the movie playback had intermittent loss of audio whether I set it to DD5.1 or not it made no difference.
The audio loss don't seem to happen at the same scene everytime I rewind and play it back all over again. It seems to happen at random scenes during the movie playback and several times there was no audio for nearly 5 to 10 seconds before it reappears and when I rewind and playback the same scene again, the audio seems to be alright for most parts?
I am wondering if any other users have had similar audio issues with rented movies from iTunes?
This is like my first rental movie which had issues with audio, the previous 3 or 4 rentals did not have any audio nor video issues. It's not my ATV unit either because movies and music videos which I already own, playback on it just fine in DD5.1 via Optical and HDMI. So the issue was just with that one movie which I rented then.
I am wondering how could one demand for a refund from Apple when faced with such problems or issues after the rented movie dissappears from your ATV 24 hours later??
Now I am feeling cautious to rent another movie, what if I have another issue with which ruins the movie experience?
I think I will stick with my PS3 and Blu-Ray for now.

Not sure but I thought I read in another issue that if you connect a TB cable from your Mini into the TB port on the display and the audio/video is OK then that would mean the built-in cable is bad. I have never tried this so not sure it would work. Hate to buy a TB cable just to test because of cost. The other way would be to take to Apple store and have them check the cable. It contains miniture IC boards and one could be bad.

Vexing intermittent loss of Internet

For about six weeks now I have been experiencing a troubling intermittent loss of Internet service. It's like on, off, on, off, on, off, etc. It changes minute to minute. I click on a link and get a message saying the web site can't be reached, try reloading.
Then I'll click on the link and Internet is back. Three or four minutes later its on again, then off again, etc.
I'm on my third or fourth modem/wireless router, the last one being installed by a Verizon tech. When the problem continued they sent another tech who replaced my ONT. Still the problem persists.
This loss of Internet occurs when using my hard wired desktop and wireless laptops used by me and others in the house.
Don't know what to do next except maybe go back to Cablevision.
We're talking northern Westchester County, N.Y.

I'm sorry you are having difficulty. An agent with access to your account will reach out to you directly by email, private message in the Forums and/or the billing telephone number on your Verizon account for more information or to help you resolve your issue.

Intermittent loss of connection

For about a week now I have been suffering from a intermittent loss of connection to the internet the internet will be fine until it randomly decides to drop out. Usually I'll be surfing the website and go to navigate to another webpage when it times out and tells me it couldn't find the website in question. My games seems to be affected as well though it is more common for me to observe this in my browser the problem occurs in Firefox and I loaded Chrome as well one day and the problem appears there as well. I need some line quality tests with dslreports.com's line quality test and I did four of them they all reported intermittent packet loss the odd thing I noticed is in all four tests I did the same node suffered a varying amount of packet loss (ae-1-60.edge1.SanJose3.Level3.net) I have been trying to get some info on this server but I can't seem to find any info on it whatsoever I have included all four tests in the zip archive attached to this post.
I also did a fifth test which I included as well I did this test after resetting the router and did another test but it was much of the same. Please tell me how to troubleshoot this problem I am losing my mind and patience.
Line Quality Test 1
Line Quality Test 2
Line Quality Test 3
Line Quality Test 4
Line Quality Test 5

I've been having a simliar issue as well for about a month now where my internet drops out every now and then for several seconds and then comes back up. This only started happening after Hurricane Sandy in Staten Island, NY when my ONT had to be replaced after being flooded. Since then, I have already had my ONT replaced twice and was given a new REV I router and told to not send back my old REV D router which never had any problems before. I have even tried putting back the REV D router and I still kept losing internet every now and then. After multiple chats with Verizon, they seem to have pinpointed the problem to be a physical issue in my house. So, I tried connecting the REV I router directly to the ONT, via coax, and I still noticed the internet dropping. Looking at the router logs, I noticed the following entries every now and then (usually multiple times a day):
Jan 10 00:29:15 2013
System Log
WAN ETH
WAN Ethernet Link Up
Jan 10 00:29:14 2013
System Log
WAN Coax
WAN Coax Link Up
Jan 10 00:29:10 2013
System Log
WAN ETH
WAN Ethernet Link Down
Jan 10 00:29:10 2013
System Log
WAN Coax
WAN Coax Link Down
and
Jan 8 04:35:26 2013
System Log
WAN Coax
WAN Coax Link Up
Jan 8 04:35:26 2013
System Log
WAN ETH
WAN Ethernet Link Up
Jan 8 04:33:42 2013
System Log
WAN ETH
WAN Ethernet Link Down
Jan 8 04:33:41 2013
System Log
WAN Coax
WAN Coax Link Down
Looking at the advanced logs I ocassionally find the following entries associated with the link flapping:
2013/01/08 04:33:44.12 M mt_igmp_params_init:223: reconf: new lan interface: br0, ver 3
2013/01/08 04:33:44.12 M mt_igmp_params_init:235: reconf: new wan interface: eth1
2013/01/08 04:33:44.20 M clink1: link down, device will be down
2013/01/08 04:33:44.24 M lan if uninit br0
2013/01/08 04:33:44.24 M removing multicast group 224.0.0.1 from device br0 port 16
2013/01/08 04:33:44.24 M removing multicast group 224.0.0.1 from device br0 port 8
2013/01/08 04:33:44.24 M removing multicast group 224.0.0.1 from device br0 port 4
2013/01/08 04:33:44.24 M removing multicast group 224.0.0.1 from device br0 port 2
2013/01/08 04:33:44.24 M removing multicast group 224.0.0.1 from device br0 port 1
2013/01/08 04:33:44.24 M removing multicast group 224.0.0.1 from device br0 port 0
2013/01/08 04:33:44.24 M uninit igmp proxy module
2013/01/08 04:33:44.24 M init igmp proxy module
2013/01/08 04:33:44.24 M lan if init br0
2013/01/08 04:33:44.24 M adding multicast group 224.0.0.1 to device br0 port 0
2013/01/08 04:33:44.24 M adding multicast group 224.0.0.1 to device br0 port 1
2013/01/08 04:33:44.24 M adding multicast group 224.0.0.1 to device br0 port 2
2013/01/08 04:33:44.24 M adding multicast group 224.0.0.1 to device br0 port 4
2013/01/08 04:33:44.24 M adding multicast group 224.0.0.1 to device br0 port 8
2013/01/08 04:33:44.24 M adding multicast group 224.0.0.1 to device br0 port 16
2013/01/08 04:33:44.31 M jan  8 04:33:43 syslog: check_exit: exiting
2013/01/08 04:33:45.10 M igmprx_lan_port_add_single: ifname=br0  ifindex=9
2013/01/08 04:33:45.10 M igmprx_lan_port_add_single: ifname=eth0  ifindex=2
2013/01/08 04:33:45.10 M igmprx_lan_port_add_single: ifname=eth0  ifindex=2
2013/01/08 04:33:45.10 M igmprx_lan_port_add_single: ifname=eth0  ifindex=2
2013/01/08 04:33:45.10 M igmprx_lan_port_add_single: ifname=eth0  ifindex=2
2013/01/08 04:33:45.10 M igmprx_lan_port_add_single: ifname=eth0  ifindex=2
2013/01/08 04:33:45.10 M @@ setting new value completed, it should show new value in proc/proxy
2013/01/08 04:33:45.12 M mt_igmp_params_init:223: reconf: new lan interface: br0, ver 3
2013/01/08 04:33:45.20 M eth1: link down, device will be down
2013/01/08 04:33:45.26 M lan if uninit br0
2013/01/08 04:33:45.28 M removing multicast group 224.0.0.1 from device br0 port 16
2013/01/08 04:33:45.28 M removing multicast group 224.0.0.1 from device br0 port 8
2013/01/08 04:33:45.28 M removing multicast group 224.0.0.1 from device br0 port 4
2013/01/08 04:33:45.28 M removing multicast group 224.0.0.1 from device br0 port 2
2013/01/08 04:33:45.28 M removing multicast group 224.0.0.1 from device br0 port 1
2013/01/08 04:33:45.28 M removing multicast group 224.0.0.1 from device br0 port 0
2013/01/08 04:33:45.28 M uninit igmp proxy module
2013/01/08 04:33:45.28 M init igmp proxy module
2013/01/08 04:33:45.28 M lan if init br0
2013/01/08 04:33:45.28 M adding multicast group 224.0.0.1 to device br0 port 0
2013/01/08 04:33:45.28 M adding multicast group 224.0.0.1 to device br0 port 1
2013/01/08 04:33:45.28 M adding multicast group 224.0.0.1 to device br0 port 2
2013/01/08 04:33:45.28 M adding multicast group 224.0.0.1 to device br0 port 4
2013/01/08 04:33:45.28 M adding multicast group 224.0.0.1 to device br0 port 8
2013/01/08 04:33:45.28 M adding multicast group 224.0.0.1 to device br0 port 16
2013/01/08 04:33:46.10 M igmprx_lan_port_add_single: ifname=br0  ifindex=9
2013/01/08 04:33:46.10 M igmprx_lan_port_add_single: ifname=eth0  ifindex=2
2013/01/08 04:33:46.10 M igmprx_lan_port_add_single: ifname=eth0  ifindex=2
2013/01/08 04:33:46.10 M igmprx_lan_port_add_single: ifname=eth0  ifindex=2
2013/01/08 04:33:46.10 M igmprx_lan_port_add_single: ifname=eth0  ifindex=2
2013/01/08 04:33:46.10 M igmprx_lan_port_add_single: ifname=eth0  ifindex=2
2013/01/08 04:33:46.10 M eth1: stopped
2013/01/08 04:33:46.10 M eth1: mac address changed
2013/01/08 04:33:46.10 M port 0: setting mac to 0x1, status: 0x2c3d
2013/01/08 04:33:46.10 M eth1: link up
2013/01/08 04:33:46.10 M eth1: started
2013/01/08 04:35:27.24 M eth1: link up, device will be up
2013/01/08 04:35:27.54 M clink1: lof 1000mhz
2013/01/08 04:35:27.55 M mt_igmp_params_init:223: reconf: new lan interface: br0, ver 3
2013/01/08 04:35:27.63 M clink1: link up, device will be up
2013/01/08 04:35:27.63 M lan if uninit br0
2013/01/08 04:35:27.63 M removing multicast group 224.0.0.1 from device br0 port 16
2013/01/08 04:35:27.63 M removing multicast group 224.0.0.1 from device br0 port 8
2013/01/08 04:35:27.63 M removing multicast group 224.0.0.1 from device br0 port 4
2013/01/08 04:35:27.63 M removing multicast group 224.0.0.1 from device br0 port 2
2013/01/08 04:35:27.63 M removing multicast group 224.0.0.1 from device br0 port 1
2013/01/08 04:35:27.63 M removing multicast group 224.0.0.1 from device br0 port 0
2013/01/08 04:35:27.63 M uninit igmp proxy module
2013/01/08 04:35:27.63 M init igmp proxy module
2013/01/08 04:35:27.63 M lan if init br0
2013/01/08 04:35:27.63 M adding multicast group 224.0.0.1 to device br0 port 0
2013/01/08 04:35:27.63 M adding multicast group 224.0.0.1 to device br0 port 1
2013/01/08 04:35:27.63 M adding multicast group 224.0.0.1 to device br0 port 2
2013/01/08 04:35:27.63 M adding multicast group 224.0.0.1 to device br0 port 4
2013/01/08 04:35:27.63 M adding multicast group 224.0.0.1 to device br0 port 8
2013/01/08 04:35:27.63 M adding multicast group 224.0.0.1 to device br0 port 16
2013/01/08 04:35:28.10 M igmprx_lan_port_add_single: ifname=br0  ifindex=9
2013/01/08 04:35:28.10 M igmprx_lan_port_add_single: ifname=eth0  ifindex=2
2013/01/08 04:35:28.12 M igmprx_lan_port_add_single: ifname=eth0  ifindex=2
2013/01/08 04:35:28.12 M igmprx_lan_port_add_single: ifname=eth0  ifindex=2
2013/01/08 04:35:28.12 M igmprx_lan_port_add_single: ifname=eth0  ifindex=2
2013/01/08 04:35:28.12 M igmprx_lan_port_add_single: ifname=eth0  ifindex=2
2013/01/08 04:35:36.79 M mt_igmp_params_init:223: reconf: new lan interface: br0, ver 3
2013/01/08 04:35:36.79 M mt_igmp_params_init:235: reconf: new wan interface: eth1
2013/01/08 04:35:36.85 M dhcp client: wan ethernet renew ip address: 173.56.37.223
2013/01/08 04:35:36.85 M dhcp client: wan ethernet renew netmask: 255.255.255.0
2013/01/08 04:35:36.85 M dhcp client: wan ethernet renew gateway: 173.56.37.1
2013/01/08 04:35:36.85 M dhcp client: wan ethernet renew dns server: 208.67.222.222 208.67.220.220
2013/01/08 04:35:36.90 M lan if uninit br0
2013/01/08 04:35:36.90 M removing multicast group 224.0.0.1 from device br0 port 16
2013/01/08 04:35:36.90 M removing multicast group 224.0.0.1 from device br0 port 8
2013/01/08 04:35:36.90 M removing multicast group 224.0.0.1 from device br0 port 4
2013/01/08 04:35:36.90 M removing multicast group 224.0.0.1 from device br0 port 2
2013/01/08 04:35:36.90 M removing multicast group 224.0.0.1 from device br0 port 1
2013/01/08 04:35:36.90 M removing multicast group 224.0.0.1 from device br0 port 0
2013/01/08 04:35:36.90 M uninit igmp proxy module
2013/01/08 04:35:36.90 M init igmp proxy module
2013/01/08 04:35:36.90 M lan if init br0
2013/01/08 04:35:36.90 M adding multicast group 224.0.0.1 to device br0 port 0
2013/01/08 04:35:36.90 M adding multicast group 224.0.0.1 to device br0 port 1
2013/01/08 04:35:36.90 M adding multicast group 224.0.0.1 to device br0 port 2
2013/01/08 04:35:36.91 M adding multicast group 224.0.0.1 to device br0 port 4
2013/01/08 04:35:36.91 M adding multicast group 224.0.0.1 to device br0 port 8
2013/01/08 04:35:36.91 M adding multicast group 224.0.0.1 to device br0 port 16
2013/01/08 04:35:36.91 M out: [62] nat error: no free nat ip ([62] nat error: no free nat ip: )
2013/01/08 04:35:37.19 M igmprx_lan_port_add_single: ifname=br0  ifindex=9
2013/01/08 04:35:37.19 M igmprx_lan_port_add_single: ifname=eth0  ifindex=2
2013/01/08 04:35:37.19 M igmprx_lan_port_add_single: ifname=eth0  ifindex=2
2013/01/08 04:35:37.19 M igmprx_lan_port_add_single: ifname=eth0  ifindex=2
2013/01/08 04:35:37.19 M igmprx_lan_port_add_single: ifname=eth0  ifindex=2
2013/01/08 04:35:37.19 M igmprx_lan_port_add_single: ifname=eth0  ifindex=2
2013/01/08 04:35:37.19 M @@ setting new value completed, it should show new value in proc/proxy
2013/01/08 04:35:47.83 M acs ack: event = 4 value change
I setup syslog on the router which feeds it to the WallWatcher application and this is all the details I get duing the flap. I'm really stumped by this and can't figure out what the problem is. Could it be a bad PON card? I noticed that the logs show only the WAN Coax going down without the LAN Coax which leads me to believe in a faulty connection between the router and the ONT. I've already tried connecting both routers directly to the ONT to no avail. The only changes that I can think of since Sandy are the electrical outlets that were replaced. Could they be causing some kind of interference? I've tried running the coax with and without the ground block, but that didn't help either. The only thing that was not replaced since the first post-Sandy installation is the ONT battery system, only the battery itself was replaced once. Could that be it? Just to be clear, I have always been connected via coax and I have tried testing with different cables.

Intermittent loss of internet connection on Homehu...

Hi Everyone
I have recently taken out a new contract with BT and connected my new Homehub 4 on the 14th February. Seemly it was okay for at least 5 days then I started to experience some intermittent loss of internet on all of the devices, i.e PC, laptop, xbox, it effected both wired and wireless. The hub was showing orange light, which then prompt me to press the reset/restart button on top of the hub.
I have try out my old Homehub 1 for 3 days to see if it effected that one too, but the hub 1 was perfect in term of no loss of connection for 3 day.
Then I connect homehub 4 again on Fri 28th February it was okay for a day, except on 1st march in the morning hub seem to disconnect/reconnect itself. Then around 2310 pm I have loss all connection to the internet through all of my devices again.
Does anyone know what this problem is? It is to do with BT-Wifi Fon, or is the hub 4 faulty and need replacing?
Many Thanks

It was orange central broadband light, there were no other light showing on the silver part.
I have not tried test socket yet, however, I did have a new master socket and line replaced couple year ago, so it would have the new faceplate on there. Plus, the external line etc must be working since hub 1 was working perfectly.
Here the information from speed test
Download Speed:        1.98 Mbps
0 Mbps 2 Mbps
Max Achievable Speed
Download speed achieved during the test was - 1.98 Mbps
For your connection, the acceptable range of speeds is 0.4 Mbps-2 Mbps.
Additional Information:
Your DSL Connection Rate :2.3 Mbps(DOWN-STREAM), 0.45 Mbps(UP-STREAM)
IP Profile for your line is - 2 Mbps
23:17:22, 01 Mar.           ( 86.310000) DSL noise margin: 17.00 dB upstream, 10.20 dB downstream
23:17:22, 01 Mar.           ( 86.130000) DSL line rate: 448 Kbps upstream, 2304 Kbps downstream
Any idea what this mean on the event log? I seem to keep getting PPP LCP send conf request.
23:17:26, 01 Mar.           ( 89.940000) PPP LCP Send Configuration Request
23:17:15, 01 Mar.           ( 78.760000) CWMP: session closed due to error: Could not resolve host

Sir i am using datasocket read ,i am communicating with java but my problem is that bcz im using while loop to see if value has changed my labview consumes all the processors time ,sir i want a event like thing so that while loop is not in continuous loop

sir i have given lot of effort but i am not able to solve my problem either with notifiers or with occurence fn,probably i do not know how to use these synchronisation tools.

sir i am using datasocket read ,i am communicating with java but my problem is that bcz im using while loop to see if value has changed my labview consumes all the processors time ,sir i want a event like thing so that while loop is not in continuous loopHi Sam,
I want to pass along a couple of tips that will get you more and better response on this list.
1) There is an un-written rule that says more "stars" is better than just one star. Giving a one star rating will probably eliminate that responder from individuals that are willing to anser your question.
2) If someone gives you an answer that meets your needs, reply to that answer and say that it worked.
3) If someone suggests that you look at an example, DO IT! LV comes with a wonderful set of examples that demonstate almost all of the core functionality of LV. Familiarity with all of the LV examples will get you through about 80% of the Certified LabVIEW Developer exam.
4) If you have a question first search the examples for something tha
t may help you. If you can not find an example that is exactly what you want, find one that is close and post a question along the lines of "I want to do something similar to example X, how can I modify it to do Y".
5) Some of the greatest LabVIEW minds offer there services and advice for free on this exchange. If you treat them good, they can get you through almost every challenge that can be encountered in LV.
6) If English is not your native language, post your question in the language you favor. There is probably someone around that can help. "We're big, we're bad, we're international!"
Trying to help,
Welcome to the forum!
Ben
Ben Rayner
I am currently active on.. MainStream Preppers
Rayner's Ridge is under construction

HTTP Server is not currently supported with Solaris 10

I am having a problem to start the HTTP Server on Solaris 10 (I am installing HTTP Server as part of HTMLDB installation on Solaris 10).
I had a problem to install it at first, however I've found on 'AskTom' that unsetting ORA_NLS33 helps and it did. Now I can't start the HTTP server and I've found on metalink that 'HTTP Server is not currently supported with Solaris 10, this is targeted for Q2CY05'.
Has this been fixed yet?
Thank you for your time.
DanielD

Hi james,
I have checked the log file but i am unable to find what to do next.
I am giving the small piece of content of the log file. The following messages are repeating again and again...
Log content:-
07/09/23 17:20:36 Start process
/dev011/oracle/product/10.1.3.1/OracleAS_1/Apache/Apache/bin/apachectl startssl: execing httpd
07/09/23 17:22:26 Start process
/dev011/oracle/product/10.1.3.1/OracleAS_1/Apache/Apache/bin/apachectl startssl: execing httpd
07/09/23 17:22:30 Start process
/dev011/oracle/product/10.1.3.1/OracleAS_1/Apache/Apache/bin/apachectl startssl: execing httpd
07/09/23 17:24:40 Start process
/dev011/oracle/product/10.1.3.1/OracleAS_1/Apache/Apache/bin/apachectl startssl: execing httpd
07/09/23 17:24:44 Start process
/dev011/oracle/product/10.1.3.1/OracleAS_1/Apache/Apache/bin/apachectl startssl: execing httpd
07/09/23 17:26:36 Start process
/dev011/oracle/product/10.1.3.1/OracleAS_1/Apache/Apache/bin/apachectl startssl: execing httpd
07/09/23 17:26:42 Start process
/dev011/oracle/product/10.1.3.1/OracleAS_1/Apache/Apache/bin/apachectl startssl: execing httpd
07/09/23 17:28:57 Start process
/dev011/oracle/product/10.1.3.1/OracleAS_1/Apache/Apache/bin/apachectl startssl: execing httpd
07/09/23 17:29:01 Start process
/dev011/oracle/product/10.1.3.1/OracleAS_1/Apache/Apache/bin/apachectl startssl: execing httpd

Intermittent Loss of Communications with Solaris 10

Similar Messages

Maybe you are looking for