Intermittent lost of connection of wireless keyboard and mouse, intermittent lost of connection of wireless keyboard and mouse

i'm using the wireless keyboard and mouse. ocassionally i encounter intermittent lost of connections. changed (to new) batteries but problem continues.
anyone knows why and what can be done?
tks
Nasayah

Troubleshooting wireless mouse and keyboard issues
http://support.apple.com/kb/TS3048 

Similar Messages

  • TS3048 My early 2009 Mac Pro does not connect via bluetooth to my sound bar or bluetooth mini speakers. Both my wireless keyboard and mouse have no problems connecting. What do I need to do to connect to external bluetooth devices?

    My early 2009 Mac Pro does not connect via bluetooth to my sound bar or bluetooth mini speakers. Both my wireless keyboard and mouse have no problems connecting. What do I need to do to connect to external bluetooth devices?

    I would always have a wired keyboard and mouse on hand (need not be expensive ... any cheap wired devices will work).  "Emergency recovery" procedures can activate features in random order, so the opportunity to select a recovery partition may pass before the wireless devices are recognized.
    That will let you select the "turn on Bluetooth" icon.

  • I have bought the wireless keyboard for my iPad.  I was working for a day but now the power light won't stay on and as such won't connect to the iPad.  I have changed the batteries but still no difference.

    I have bought the wireless keyboard for my iPad.  I was working for a day but now the power light won't stay on and as such won't connect to the iPad.  I have changed the batteries but still no difference.

    Not knowing which wireless keyboard you bought, it is difficult to be specific.  but ...
    it is quite normal for the keyboard's power light not to stay on - it is a way of conserving battery power.
    Try this:
    turn you keyboard off
    on your iPad go to Settings > Bluetooth
    if your keyboard is listed under Devices, then touch the little blue i to its right and choose Forget this Device
    now reset your iPad:  hold both the Home and Power buttons down for about 10 seconds until the Apple logo appears, let go promptly when the Apple logo appears and wait another 30 seconds for your iPad to turn itself on
    After your iPad is back on again go back to Settings > Bluetooth
    now turn your keyboard back on and see if it appeard under Now Discoverable
         if it doesn't read your keyboard guide to figure out how to put it into Discovery mode
    touch the listing for your keyboard under Now Discoverable, it should now appear under Devices
    touch the listing for you keyboard under Devices, and choose to pair with it.

  • When I try to get my email and I am outside our wireless network I get a "lost connection to server" message.  I am trying to connect to Outlook.

    When I try to get my email and I am outside our wireless network I get a "lost connection to server " message

    Outlook is a mail client for PCs and Macs. Who is your mail provider? If you're talking about a business mail system, it may not be accessible from outside the company network. You will need to check with your IT department.

  • My wireless Apple keyboard won't connect, it just keeps blinking to pair, but nothing connects. I even tried hooking up another wireless I have and it does the same thing. Should I delete it and set it up again?

    My wireless Apple keyboard won't connect, it just keeps blinking to pair, but nothing connects. I even tried hooking up another wireless I have and it does the same thing. Should I delete it and set it up again?

    Hey Apple Health,
    Welcome to Apple Support Communities! There's an article that helps to resolve issues with wireless keyboards. I'd take a look at it, go through the troubleshooting steps, and see if that resolves the issue for you:
    Troubleshooting wireless mouse and keyboard issues
    http://support.apple.com/kb/TS3048
    Best,
    David

  • My ipod was connecting to my home wi-fi just fine until I uploaded new music from my Itunes on my laptop. Now my ipod and my iphone will not connect to my wireless network. I've tried resetting the network settings etc... Nothing seems to work. Help!

    My ipod (version 6.1.3) was connectiong to my home wi-fi just fine until I uploaded new music from my itunes via my laptop. Now my ipod and my iphone will not connect to my wireless network. I've uplugged my wireless network and reset my network settings etc... nothing seems to work. Please help!

    Does the iOS devices connect to other networks?
    Does the iOS devices see the network?
    Any error messages?
    Do other devices now connect?
    Did the iOS device connect before?
    Try the following to rule out a software problem:                 
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Power off and then back on the router
    - Reset network settings: Settings>General>Reset>Reset Network Settings
    - iOS: Troubleshooting Wi-Fi networks and connections
    - Wi-Fi: Unable to connect to an 802.11n Wi-Fi network
    - iOS: Recommended settings for Wi-Fi routers and access points
    - Restore from backup. See:
    iOS: How to back up
    - Restore to factory settings/new iOS device.
    If still problem make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
    Apple Retail Store - Genius Bar
    Since both iPhone and iPod stopped connecting I suspect a problem with your network.

  • As i turned on my iphone 4s on and connected to a wireless internet a page opened from the app firewall ip and i usually choose all connections. so it got stuck i held the standy by button but it won't turn off. so i held the standyby and home buttons.

    As i turned on my iphone 4s on and connected to a wireless internet a page opened from the app firewall ip and i usually choose all connections. so it got stuck i held the standy by button but it won't turn off. so i held the standyby and home buttons. when it opened all apps music and pics where not there. why? then i enterted photos and the loading logo appeared then the standyby appeared and i entered my password and everything in my iphone was there but thing were scattered and apps wheren't in folders everything was messed up but no photos or music AND IT SAYS UP IN THE MIDDLE OF THE SCREEN EXIT SAFE MODE. so i restarted it again and it opened and nothing was there and again i entered photos and the samething happen again. why did this happen? and can i get my data back? and in the usage it says that these thing are there but not showing.

    stevejobsfan0123 wrote:
    The Find my iPhone service option is given to you when you first set up the device. If you just reset it, you may have been given that option. So, in other words, the service may have been enabled even if you didn't realize it. You can then go to www.icloud.com and click on Find my iPhone, and have it play a sound. Or, you can use the Find my iPhone app on your mom's iPhone, but the service would still need to be turned on on your iPod.
    Unlike Compukid said, Apple will not assist in locating a lost device without the Find my iPhone service.
    I found that out 2 years ago, it's just that I thought Apple might have changed that.

  • Ok, tried message boards everywhere to try and figure this out before having to post a question. Have a 21.5" iMac running Snow Leopard 10.6.8.  After updates no wireless capability for ipad or laptop, imac connects fine but nothing else.No widgets work.

    Ok, tried message boards everywhere to try and figure this out before having to post a question. Have a 21.5" iMac running Snow Leopard 10.6.8.  After updates no wireless capability for ipad or laptop, imac connects fine but nothing else. No dashboard widgets work, Skype won't work. What goes?

    Your post is pretty lengthy and I have to admit I didn't read it all. Please try restarting in Safe Mode, if that doesn't work please do both a SMC and PRAM reset. These may take 2-3 attempts.
    SMC RESET
    Shut down the computer.
    Unplug the computer's power cord and all peripherals.
    Press and hold the power button for 5 seconds.
    Release the power button.
    Attach the computers power cable.
    Press the power button to turn on the computer.
    PRAM RESET
    Shut down the computer.
    Locate the following keys on the keyboard: Command, Option, P, and R. You will need to hold these keys down simultaneously in step 4.
    Turn on the computer.
    Press and hold the Command-Option-P-R keys. You must press this key combination before the gray screen appears.
    Hold the keys down until the computer restarts and you hear the startup sound for the second time.
    Release the keys.

  • My 3 apple products, an imac, a macbook air and a macbook lost their contact with their external hard disks. They were LaCie make. And every time I turn my laptops, I find the positions of the keys on their  keyboards changed.  Why is Apple silent?

    After the latest apple IOS upgrade my 3 apple products, an imac, a macbook air and a macbook, lost their contact with their external hard disks. They were LaCie make. And every time I turn my laptops, I find the positions of the keys on their  keyboards changed.  Why is Apple silent? There are so many people complaining about this issue and expecting Apple to correct this issue that they have created.

    Probably because it's not an Apple issue. I have Lacie EHD's connected to my MBAir and iMac, all work perfectly on Mavericks. In addition I don't have any keyboard issues on any of my Apple products. BTW IOS is only for IOS devices such as iPads, iPods and iPhones, Macs use OS X. The two OS's are seperate  products designed to run on seperate products.

  • I am experiencing wireless connection problem on 4s after ios 8.1 upgrade. The wireless icon appears showing that it's connected but webpages do not load. I have checked my internet connection with other devices and seems to be alright. what to do?

    Hi
    I am experiencing wireless connection problem on 4s after ios 8.1 upgrade. The wireless icon appears showing that it's connected but webpages do not load. I have checked my internet connection with other devices and seems to be alright. what to do?
    I have tried reseting the network settings and forgetting my wireless connection and re-connecting to it. I even backed up my phone on itunes and restored it, factory reseted it. Nothing seems to work.
    Also after my upgrade to ios 8.1 my personal hotspot option under cellular data has disappeared.
    Would you please help me out? I would really appreciate it.

    Hi..
    Restart your router then restart the iPhone to test.
    If that doesn't help, try this support article >   iOS: Troubleshooting Wi-Fi networks and connections

  • I cannot get my IPad air to connect to wireless in home. Two other iPad 2's connect as well as laptops. I have already exchanged one iPad air and none want to connect. Husband has taken iPad air to the apple store, connects here but not here. Who can help

    Can someone please help???  I received am IPad air in November for my birthday and have not been able to use yet,  I could not get it to connect so I returned it for another iPad air. And cannot get it to connect to wireless either. I have three other iPad 2's and laptops in home and everything connects with no problem. What is the deal with these iPad airs? My husband took the iPad to Apple store, it works there but didn't change anything so it won't work at home. Do I need to step down to old IPad since that's all that will connect in home.  This is crazy,!!! How can I get my IPad air working in my home.???

    Some things to try first:
    1. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
    2. Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
    3. Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
    4. Go into your router security settings and change from WEP to WPA with AES.
    5.  Renew IP Address: (especially if you are droping internet connection)
        •    Launch Settings app
        •    Tap on Wi-Fi
        •    Tap on the blue arrow of the Wi-Fi network that you connect to from the list
        •    In the window that opens, tap on the Renew Lease button
    6. Potential Quick Fixes When Your iPad Won’t Connect to Your Wifi Network
    http://ipadinsight.com/ipad-tips-tricks/potential-quick-fixes-when-your-ipad-won t-connect-to-your-wifi-network/
    ~~~~~~~~~~~~~~~~~~~~~~~~~
    Fix WiFi Issue for iOS 7
    http://ipadnerds.com/fix-wifi-issue-ios-7/
    iOS 6 Wifi Problems/Fixes
    Wi-Fi Fix for iOS 6
    https://discussions.apple.com/thread/4823738?tstart=240
    How To: Workaround iPad Wi-Fi Issues
    http://www.theipadfan.com/workaround-ipad-wifi-issues/
    Another Fix For iOS 6 WiFi Problems
    http://tabletcrunch.com/2012/10/27/fix-ios-6-wifi-problems-ssid/
    Wifi Doesn't Connect After Waking From Sleep - Sometimes increasing screen brightness prevents the failure to reconnect after waking from sleep. According to Apple, “If brightness is at lowest level, increase it by moving the slider to the right and set auto brightness to off.”
    Fix For iOS 6 WiFi Problems?
    http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
    Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
    http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
    How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
    http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
    iOS 6 iPad 3 wi-fi "connection fix" for netgear router
    http://www.youtube.com/watch?v=XsWS4ha-dn0
    Apple's iOS 6 Wi-Fi problems
    http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
    ~~~~~~~~~~~~~~~~~~~~~~~
    iPad: Issues connecting to Wi-Fi networks
    http://support.apple.com/kb/ts3304
    How to Boost Your Wi-Fi Signal
    http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Boost-Your-Wi-Fi-Signal.h tm
    Troubleshooting a Weak Wi-Fi Signal
    http://ipad.about.com/od/iPad_Troubleshooting/a/Troubleshooting-A-Weak-Wi-Fi-Sig nal.htm
    How to Fix a Poor Wi-Fi Signal on Your iPad
    http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Fix-A-Poor-Wi-Fi-Signal-O n-Your-iPad.htm
    iOS Troubleshooting Wi-Fi networks and connections  http://support.apple.com/kb/TS1398
    iPad: Issues connecting to Wi-Fi networks  http://support.apple.com/kb/ts3304
    WiFi Connecting/Troubleshooting http://www.apple.com/support/ipad/wifi/
    How to Fix: My iPad Won't Connect to WiFi
    http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
    iOS: Connecting to the Internet http://support.apple.com/kb/HT1695
    iOS: Recommended settings for Wi-Fi routers and access points  http://support.apple.com/kb/HT4199
    How to Quickly Fix iPad 3 Wi-Fi Reception Problems
    http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
    iPad Wi-Fi Problems: Comprehensive List of Fixes
    http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
    Connect iPad to Wi-Fi (with troubleshooting info)
    http://thehowto.wikidot.com/wifi-connect-ipad
    10 Ways to Boost Your Wireless Signal
    http://www.pcmag.com/article2/0,2817,2372811,00.asp
    Fix iPad Wifi Connection and Signal Issues  http://www.youtube.com/watch?v=uwWtIG5jUxE
    Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
    How To Fix iPhone, iPad, iPod Touch Wi-Fi Connectivity Issue http://tinyurl.com/7nvxbmz
    Unable to Connect After iOS Update - saw this solution on another post.
    https://discussions.apple.com/thread/4010130
    Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
    Some Wi-Fi losses may stem from a problematic interaction between Wi-Fi and cellular data connections. Numerous users have found that turning off Cellular Data in Settings gets their Wi-Fi working again.
    You may have many apps open which can possibly cause the slowdown and possibly the loss of wifi. In iOS 4-6 double tap your Home button & at the bottom of the screen you will see the icons of all open apps. Close those you are not using by pressing on an icon until all icons wiggle - then tap the minus sign. For iOS 7 users, there’s an easy way to see which apps are open in order to close them. By double-tapping the home button on your iPhone or iPad, the new multitasking feature in iOS 7 shows full page previews of all your open apps. Simply scroll horizontally to see all your apps, and close the apps with a simple flick towards the top of the screen.
    Wi-Fi or Bluetooth settings grayed out or dim
    http://support.apple.com/kb/TS1559
    ~~~~~~~~~~~~~~~
    If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
     Cheers, Tom

  • I recently replaced my dead airport router with a netgear91-5g router and synced it successfully to my Lexmark Pro 915 printer and my computer and yet when I try to print wirelessly I get the message: "printer not connected; printer offline".

    I recently replaced my dead airport router with a Netgear91-5g router and synced it successfully to my Lexmark Pro 915 printer and my computer; yet when I try to print wirelessly I get the message: "printer not connected; printer offline". Lexmark support verified that my printer was connected to the new router and the problem was with the computer's printer configuration and they could reconfigure it online if I paid for their "Premium Support" services ($119 for one year, 3 fixes). I declined, feeling sure that this is something I could do if I knew how. Could it be an incompatability issue with OS 10.8.3?

    You saved me $$$ that I can ill afford on my fixed income. I was very unhappy with the "support" from Lexmark... what a rip off!  Thank you dwb!

  • My iphone has been lost in my house and i need to find a way to track it and its offline. it wont connect to the internet so there isnt a way to use find my iphone. i just want to play a sound on it. is there any way i can get a app that connects my ipod

    my iphone has been lost in my house and i need to find a way to track it and its offline. it wont connect to the internet so there isnt a way to use find my iphone. i just want to play a sound on it. is there any way i can get a app that connects my ipod from a laptop or a different way to find it.

    If your phone is offline, the ONLY way to find it is to look for it the old fashioned way.  Your phone CANNOT be located electronically if it's offline.

  • How to set up 6th Generation AirPort Extreme to cable modem as a wireless router and then connect my 3rd Generation Time Capsule to AirPort Extreme as a wireless extender?

    What is the best way to set up my 6th Generation AirPort Extreme (A1521) to my cable modem as a wireless router and then connect my 3rd Generation Time Capsule (A1355) to my AirPort Extreme as a wireless extender? I live in a small 1 story house and I currently have the Airport Extreme connected to my cable modem in the living room and the Time Capsule plugged into the wall in my bedroom. I am able to wirelessly connect to the internet using the AirPort Extreme as my router and I can also do wireless back ups to my Time Capsule. My problem is that my connection seems to be really slow! My 1TB Time Capsule back up is only half way complete and it has been 3 days! My computer has been backing up all day and night for almost 72 hours and its still not even 75% complete. I have backed up to this Time Capsule in the past and it never took this long. I am thinking that when I set up my AirPort Extreme and Time Capsule using AirPort Utility I must have set it up incorrectly or something.
    How do I set up my Airport Extreme and Time Capsule for the fastest possible internet speed and back up speed?
    Thank you,

    AirPort Utility 5.6 works with AirPort Extreme 802.11g base stations.
    It works with N version airports.
    It will also show details of the AC model but cannot be used for the setup.. mostly.
    I purposely got the new 6th Gen Airport Extreme so my internet connection would be a lot faster!
    Your network will be much faster when you have AC client directly connected to the AE. Older client will go no faster.. but what is worse.. extend wireless is mixing new and old wireless standards.. guess what one wins.. OLD.. So when you extend wireless.. you have no improvement whatsoever. This whole post is about extending wireless.. so you cannot extend to older equipment and do any better.. maybe slightly better signal although from your comments that isn't happening either.
    I would rather not have to use an ethernet at all with the TC and I don't know EOP adapters are!
    If you do not use ethernet then you are going to be forced to accept slow speed.
    EOP (ethernet over power). Also called homeplug in the US.
    http://en.wikipedia.org/wiki/HomePlug
    Provides a method of networking over power cabling that already exists in your house.
    So what your saying is for the fastest internet speed and back up speed possible I should keep my Airport Extreme plugged into my Modem and keep my TC set up as a wireless extender? Then when I want to do back ups I should plug an ethernet cable from my TC to my MacBook Pro?
    To spell this out.
    A wireless link to an extended device will go very slowly.. if it is not direct.
    So lets say you have a laptop sitting in the lounge.. Your connection goes.. Laptop- - - - - AE- - - - -TC.
    That means two wireless links.. wireless has this nasty half duplex and single channel nature.. it can send or receive (Tx or Rx) but not at the same time.
    Ethernet by contrast does both at once. It is full duplex.
    Wireless can talk to one client at a time.. so if there are multiple items using wireless lets say 4 devices.. then your computer gets a 25% time slice. Since wireless cannot handle multiple simultaneous connections.
    Ethernet by contrast can connect multiple computers to multiple destinations at the same time.. all transmitting and receiving at full speed.
    When you put all this together.. there are a couple of rules for fast connection.
    1. Use ethernet at all times. Where you cannot use ethernet use anything but wireless.. eg EOP (homeplug) at least to try and get rid of wireless.
    2. Where you must use wireless use it sparingly and make sure it is never more than one hop.. ie never have an extend wireless (repeater is more usual term). Repeater will cause instant slowdown of 50% and maybe up to 75% just because it is so inefficient.
    3. Fastest wireless is 5ghz but it has very short range.. you need to be up close and personal to get it working.
    Apple routers however unless you do manual setup I suggest are set to connect to best signal strength not best speed. It will therefore use 2.4ghz at 25% less speed than 5ghz because it is 1db better signal.. this madness means you need to setup manually for the best setup.

  • Hey! recently my key board settings has changed and now my volume buttons are no longer F10 and F11, now if i want to change the volume i have to do it on the top bar of the screen! how do i change it back to work normally on my wireless keyboard?

    Hey! recently my key board settings has changed and now my volume buttons are no longer F10 and F11, now if i want to change the volume i have to do it on the top bar of the screen! how do i change it back to work normally on my wireless keyboard?

    Hi, did you upgrade the OS lately?
    I think Spark cured this for another person and the same problem...
    http://www.shadowlab.org/Software/spark.php

  • HT2497 I just purchased the 2TB TC and set it up on bridge mode to my att verse which is connected via ethernet cable.  The TC is continually blinking amber and an error message states that a wireless network cannot be found but the uverse is functioning

    I just purchased the 2TB TC and set it up on bridge mode to my att verse which is connected via ethernet cable.  The TC is continually blinking amber and an error message states that a wireless network cannot be found but the uverse is functioning great.  The network name I assigned to the TC is also not appearing among available networks.  How do I remedy this, please?

    What OS on the computer you are using to setup the TC?
    Did you turn on ipv6 for wireless to link-local... this is essential for network access now??
    Try power cycling the network.. start up in correct order.. uverse.. 2min wait.. TC.. 2min wait.. computer.
    No luck factory reset and start over. Use ethernet cable as well to the computer to help it.
    No luck I can show you manual method.

Maybe you are looking for

  • Service Entry Sheet creation!!!!

    Hi all, I am working on service procurement with ECS scenario.The Service Entry Sheet in the backend R/3 system is subject to release strategy(for a material group). Whenever I create a Service Entry Sheet(SES) based on a EBP PO, then the SES is subj

  • Word stopped working in all identities

    have new macbook pro and installed microsoft word. made 4 separate identities for different family members. Worked fine for a month, and today, can only access word from 1 identity. any idea what happened and what to do to fix it?

  • Corrupt Attachment after Saving in Chattermail

    I have been trying to save Chattermail email attachments to an external card on my Treo 755p and then either move the card to a PC or transmit the attachment via infrared. The process works both ways except for the fact that when I try to open the at

  • Canon Mg 5320 printer prints in foreign language need english

    While trying to print off internet,  The printer  in preview showed a foreign language.  Tried to fix on printer, in device settings, by putting english is,  Didn't work.  Needs to be done on computer.  How do I do this.  Thanks Shirl

  • Dreamweaver Connections Folder Help Needed

    I am working on Mac OS 10.4, Dreamweaver 8, PHP 4.1+ and MySQL. I can get my database connection to work if I have it directly in the PHP code but if I try to do it using the Dreamweaver interface - the connection doesn't work. My testing server and