Intermittent power issue
Have intermittent power problem that has just lately started. If Imac put to sleep via the side bar I sometimes cannot get it to boot up either by using the space bar ( which is how I normally awake it) or by using the power button. The logic board, power supply and the wire for the power supply has just been replaced and the problem has happened again. The iMac has been plugged into a UPS for some time and doesn't appear to be the problem as other items work OK. I can reboot the Imac if I pull the power plug and re-plug whenever the problem has arisen. I can also reboot by shutting the UPS of and the on again. Any thoughts?
Try resetting PRAM: http://support.apple.com/kb/HT1379
Similar Messages
-
IMac (2007) intermittent power issues
Hi,
I have a 2007 iMac. I am getting intermittent power issues with it.
One day it wont power up at all...and might not power up for a number of weeks. And just when I have given up on it, it will power up and work for a wee while without any issues (including being shutdown nightly). It'll work for a while and then it'll stop working and again it may take a couple of weeks before it'll start working again.
Does anyone have any idea what might be the issue?
any help/advise greatly appreciated.Hi IsMiseAodh - did you ever determine what the cause of intermittent no response to power was? I have a iMac with a similar problem. Thanks!
-
Unable to Troubleshoot Power Issues on Mac mini 2011
I have been having odd and intermittent power issues with my Mac mini 2011 and could really use some help before I resign myself to taking it into an Apple Store. It's under warranty, but I now live in another country so I hope I don't need to ship it should it come down to that.
However, I have searched this topic a lot, and not only have I tried troubleshooting it, I haven't seen any power issues with other owners of this model. That leads me to think that the power supply itself is probably OK.
First of all, I live in China and the building I live in seems to have a questionable power supply. The air conditioner for example simply would not work and the repairman spent two hours messing around with wires inside the outlet and in the breakers. That did the trick, so I wonder if I'm simply not getting enough juice?
Main symptoms:
- My monitor recognizes an analog signal but will not light up (black monitor). Unplugging and replugging adaptor doesn't do anything.
- Startup Keyboard Commands (e.g. Cmmd-R) may work, but I can't tell because the monitor won't light up. Letting the computer boot up though I can hear keyboard volume keys and such making the standard sounds. I can usually restart using the keyboard too.
- My 2T external HD more often than not dismounts as well.
- I can't hear any computer activity after the chime (hard drive, etc.).
- Since I can hear the chime and there is audio feedback through the keyboard, I think that eliminates hardware problems such as logic board failure or bad RAM.
- I can't boot even if I unplug all USB peripherals.
- Holding down the power button (I have it set to make the computer sleep as well as shut down) often won't shut down the computer, but it seems to stay in sleep no matter how long I hold it. Unplugging the computer finally shuts it down, obviously.
- Unplugging and waiting 5 minutes or so and powering up again doesn't seem to make any difference, nor does switching sockets, plugging directly into the wall, etc.
Problems began about two weeks ago, got better, and then worse again. Now I'm just keeping the computer and monitor on (never sleep 24/7).
Miraculously, after much frustration and countless restarts, suddenly the screen will turn on to reveal a fully booted system that was running all along in the background. No startup screen- the monitor just magically comes on again. Often I find that my external has unmounted, but it's no big deal to get to remount. At this stage, the Mac is still very quiet and for a while the system is sluggish, though it hops back into action in 5 or 10 minutes.
At first I thought it was just my monitor, and though that's possible I suppose, it seems I'm just not getting enough juice. Once the monitor is on though, everything is fine: I can power it off and on with no problems. But I can't just leave my computer on forever though.
Any help appreciated.Well, with the other monitor (which did not work with the mini either but worked fine on a laptop), I was able to narrow the trouble spot down to either a faulty Mini Display to VGA adaptor or a damaged port. I could determine that all the other ports (incld. the USB drive, programs, internet, etc., were all working fine behind the big black GUI all through sound feedback, so I seriously doubted it could be a supply problem or a residential electric problem.
I took my mini and adaptor to a "Mac Shop" (reseller) here in China, and found it quite professional, just like a Mac Store. They tested my machine, and although they didn't have VGA monitors, they said I could return the new $30 USD adaptor if it didn't work. But as I'm writing this on the monitor now, the new adaptor did the trick.
The long and short of all this is that I've read a lot about display problems with the mini and I suspect that most of these problems are adaptor related. I myself tried to save some bucks by buying a third party plug and lived and learned. I hope the Apple adaptor works like a champ, and if it doesn't, I'll know the first thing to eliiminate next time. -
MacBook Air intermittently has issues connecting to websites when wireless shows connected to the internet. The pages show that I am offline, but I can ping Google DNS. Windows PC, iPhone and Android phone have no issue displaying the same web pages.How do I solve this issue?
Go step by step and test.
1. Power off the router. Unplug it from the wall. Wait a while.
Plug it back to the wall. Power the router on. Wait until all the lights are lit properly. It will take a while.
Restart the computer.
Start up in Safe Mode.
http://support.apple.com/kb/PH14204
2. Empty Caches
Safari > Preference > Advanced
Checkmark the box for "Show Develop menu in menu bar".
Develop menu will appear in the Safari menu bar.
Click Develop and select "Empty Caches" from the dropdown.
3. Deselect Proxies if selected.
System Preference > Network > Advanced > Proxies Tab
Under "Select Protocol", uncheck any box if selected.
Click "OK" then "Apply”. -
Mysterious Mac Pro Power Issue
Model Name: Mac Pro
Model Identifier: MacPro3,1
Processor Name: Quad-Core Intel Xeon
Processor Speed: 2.8 GHz
Number Of Processors: 2
Total Number Of Cores: 8
L2 Cache (per processor): 12 MB
Memory: 4 GB
Bus Speed: 1.6 GHz
Boot ROM Version: MP31.006C.B05
SMC Version (system): 1.25f4
I recently moved my MacPro to a new building. Almost immediately it started taking a long time to boot. Twice it hung on the blue screen for approximately 10 minutes before continuing to the login screen. Problems were intermittent, sometimes it would boot fine. Then it started having trouble powering on at all. It would click and the light would turn on and off in less than 5 seconds. I took it to a different building: no powering on. I took it twice to the Apple store for the same problem, it turned on both times so I had to take it back with no help. Back at the original building, the computer turns on sometimes after leaving it unplugged overnight. I suspected an issue with the power in the building so I plugged it into a UPS. Initially it was only on a Surge Protector. On one recent occasion I accidentally nudged it with my knee and it powered down and back up. On another occasion I was sitting still watching a video and it powered down and back up with no intervention.
This will not reproduce at the Apple store. Each time it is there it has booted up perfectly using both my power cord and Apple’s power cord. Don’t know what to do next.
Any thoughts on what to try before replacing power supply and power cable? Is it possible this is not a power-related issue?make sure to use something in 1000VA or better for your UPS and that it can support your system. May seem like $200 is a lot but then they work and give you adequate shutdown or to ride out a 5 minute power issue.
UPS
http://www.amazon.com/CyberPower-CP1500PFCLCD-Compatible-1500VA-Tower/dp/B00429N 19W/
you don't need to nor is it that effective to leave unplugged over night or something.
hit the power on for 10 seconds while every cord and device is unplugged though.
Resetting the System Management Controller (SMC)
https://support.apple.com/kb/HT3964 -
My G4 MDD Dual 1.25 has been acting up lately. Sleep from the power button for from the apple menu doesn't work and after attempted, certain features such as "About This Mac" cannot be performed, along with other (abeit, minor) instabilities. Following the advice I have gleaned from this forum, I have been resetting the PMU which fixes the problems. Everything seems okay for about 1-3 weeks, then the same power issues surface again. I installed a new fresh battery, but the intermittent PMU issue is still there. Really strange. It works well, then it begins with an error message on startup about the Date and Time being set before March of 2001 or something like that, then the sleep and power issues follow. Anyone else experience this?
G4 MDD Dual 1.25 2mb L3 Cache
OSX.4.11
No apparent issues with USB or Firewire connections, after unplugging all except the keyboard and mouse--the same power issues are present after restart.
I am using a TripLite Batter backup unit that keeps the utility power constant at 120v.
I posted the above topic back in August of 2008, after searching for an answer in this forum and elsewhere. Here I am to report on the final fix. I replaced the power supply unit, and all the issues went away. This was not seemingly a straightforward solution, at least not to me. For over a year, the issue became more serious with frequent occasions when the computer did not even start. Hit the button and the light would appear for moment but no power up. I kept reading anything I could for an answer. I tried anything and everything I read on forums, but the problem persisted. It took several months, but eventually I read about the possible cause being the power supply unit, so I got a used replacement from ebay. I was so relieved to see the computer start up on the first attempt. Two weeks later, no issues. Just thought I would share my experience and maybe help someone who reads this.Has new fresh battery. Problem persists. Perhaps some error with the PMU chip itself? Would there be a firmware update to fix the problem?
-
Don't know where to get help. I just updated the software and I am having issues with not being able to update Aps or install new ones. The circles just spin and Aps just say "waiting." I tried running a diagnostic with the apple store and it came back with "power issues" (?) as a result. It wouldn't let me select an option to see what steps I could take to fix it, it just backed out of the page. I just don't know what to do.....
Hi,
Thank you for your reply, I did go to my general settings, but for some odd reason I don't have a restrictions setting, or a reset setting. I thought I could reset all the setting to see if it could be that, but as I said there aren't any.
My husband also has the iPad 2, and also did the software update and hasn't had any problems at all. I took both iPad's and compared the settings thinking maybe there could be a setting that could have been changed when the update was done. -
I have a MacBook pro that has power issues and will not start but the hardrive is fine. I do not want to lose all of my files so I was wondering if it's possible to transfer my hardrive from a older Macbook pro to a new one if I were to purchase a new one? Also, the software is not updated as the computer hasn't worked for about 2 months.
Also, if it is possible to transfer the hardrive, would my iTunes music transfer as well? It is not saved in the cloud.
Thanks for your help, it is much appreciated.You computer is probably perfectly repairable, but if you want a new one anyway, it is perfectly possible to transfer the data from the faulty one.
But it would be a mistake to simply put the old HD in the new computer.
These are the steps:
Remove Hard drive from faulty computer. (very easy on Unibody MBPs, do-able but not so easy on older MBPs)
Put it in a cheap enclosure
Connect it the new computer
Boot up new computer.
If the new computer has never been run before the Setup Assistant will ask if you want to import your apps, data, settings etc from either another mac, another HD connected to the Mac or a Time Machine back up.
Obviously chose the second option (another HD connected to this Mac) and follow prompts.
If the new computer has already been run (so Setup Assistant doesn't run when you boot it up), you will need to use Migration Assistant...or run the installer again so that Setup Assistant runs again.
Message was edited by: Mike Boreham...added sec on line -
Z77A-GD65 power issue/bad system board?
Looking for advice. I am afraid its a bad board, but some symptoms point at power which also makes no sense.
This is what the WHOLE system should look like.
MSI Z77A-GD65 system board
Intel 3770K 3.5Ghz
Anted Kuhler H20 620
G.Skills RipJaws 16GB 1600Mhz DDR3 F3-14900CL9Q-16GBXL (on the test list)
Asus nVidia GTX 680 video card
OCX Vertex 3 256MB SSD
Seagate 500GB data drive
Razer Lycosa Keyboard
Razer DeathAdder Mouse
Antec Sonata IV case with Neo ECO 620W power supply
It seems to me that 620W should be more than enough. According to my calculations thats roughly 330W of power draw against a 620W powersupply.
I am not currently over clocking.
So what the system does look like is:
If I connect the 500GB drive then windows starts rebooting as soon as the Windows logo comes up.
If I place all four sticks of RAM in the system windows starts rebooting as soon as the Windows logo comes up.
If I leave the 500GB standard sata drive off and only use 3 sticks of RAM... well we get a solid system and I am writing this message on it.
3 sticks of ram appear to work in any 3 slots and allow the system to boot, except 1,3,4. That combo also resulted in the reboots at the windows logo.
I first thought it was RAM, originally I was using Corsair Vengeance. I saw some posts here about people having the same problem, and noted that the Corsiar RAM was not tested and switch to a the tested G.Skill instead.
Any ideas? It does not completely seem like a System board issue, but it certainly should not be power. All heat levels are well within normal and as I said the system works great if I leave off the drive and one stick of RAM.
Thanks guys....System torn down, and put back together. (Found out I was out of Thrermal Compound, so I had to run to the store to get some.)
No long leads, only 9 stand offs matching each mount point on the systemboard.
Back together... problem is the exact same.
However, back to the hard drive issue. I decided to play with that since I was getting no where with 4 sticks of RAM.
What I have discovered is that with NO sata cable connecting the drive to the system board, if I try to power the two 250GB standard sata drives the system reboots just as the Windows logo should come up.
The fact that this behavior is so close to the RAM behavior... I am back to thinking its a power issue, though system board is still a chance... its just easier to buy a new better power supply than the Antec Neo Power 620 that came with the case. (I have not ever had a problem with Antec before, and will likely just buy one of their higher end power supplies to replace it, but I think I will try it next, just in case.)
I am not seeing any strange behavior power wise as far as any monitor shows... but connecting power to a sata drive that is NOT connected with a sata cable and causing a reboot just screams power at me.
Anymore thoughts today. In the mean time off to play Secret World with just the SSD and two sticks of RAM, which still runs rock solid. -
My 2007 Macbook pro Intel Core 2 Duo Processor Speed 2.33 GHz has power issues with one or some of my USB powered devices. Last night I could not back up my Lacie external drives with software SuperDuper, hard drive copier. I also had a message that Time machine failed. I have two powered 12V USB
routers that are plugged into a 550VA CyberPower surge protector. I often receive these insufficient USB power for devices messages a dozen times even when I do not have devices like camera, Ipad, Ipod, and Tascam digital audio recorder plugged in. Is there a way to troubleshoot these USB routers or should I consider that one of the routers may be defective and replace them?
DavidMy 2007 Macbook pro Intel Core 2 Duo Processor Speed 2.33 GHz has power issues with one or some of my USB powered devices. Last night I could not back up my Lacie external drives with software SuperDuper, hard drive copier. I also had a message that Time machine failed. I have two powered 12V USB
routers that are plugged into a 550VA CyberPower surge protector. I often receive these insufficient USB power for devices messages a dozen times even when I do not have devices like camera, Ipad, Ipod, and Tascam digital audio recorder plugged in. Is there a way to troubleshoot these USB routers or should I consider that one of the routers may be defective and replace them?
David -
In diagnostics for the iPhone 5, what does "Power Issue" mean? Is it covered by the 1 year limited warranty?
That has to be just about the least helpful response ever recorded by anyone in the history of the Planet Earth. Thanks!
-
Suddenly my MacBook Pro won't charge my iPhone. It says there isn't enough power:
"Because a USB device was drawing too much power from your computer, one or more of your USB devices have been disabled."
I get that message even when there is NOTHING connected to the USB cable when I plug it in.
It is allowing me to continue to use a Kensington Expert Mouse corded trackball.For power issues anywhere, perform an SMC Reset.
-
Intermittent access issue with Oracle Applications EBS R12.1.3 URL
We are facing intermittent access issue with EBS R12.1.3 URL .There are no errors generated in the access log and the IP from which we are using to access is the URL does not appear in the access log either.
1. No of concurrent users : 10 at a time
2. no. of JVM Processes for OACORE : 1
<oacore_nprocs oa_var="s_oacore_nprocs">1</oacore_nprocs> 3. Heap size settings:
<oacore_jvm_start_options oa_var="s_oacore_jvm_start_options">-server -verbose:gc -Xmx1024M -Xms128M -XX:MaxPermSize=160M -XX:NewRatio=2 -XX:+PrintGCTimeStamps -XX:+UseTLAB -XX:+UseParallelGC -XX:ParallelGCThreads=2 -Dcom.sun.management.jmxremote -Djava.security.policy=$ORACLE_HOME/j2ee/oacore/config/java2.policy -Djava.awt.headless=true -Dhttp.webdir.enable=false -Doracle.security.jazn.config=/u01/ebsstack/NFR2DW/inst/apps/NFR2DW_cinvlapp3036/ora/10.1.3/j2ee/oacore/config/jazn.xml</oacore_jvm_start_options>
<oacore_jvm_stop_options oa_var="s_oacore_jvm_stop_options">-server -verbose:gc -Xmx1024M -Xms128M -XX:MaxPermSize=160M -XX:NewRatio=2 -XX:+PrintGCTimeStamps -XX:+UseTLAB -XX:+UseParallelGC -XX:ParallelGCThreads=2 -Djava.security.policy=$ORACLE_HOME/j2ee/oacore/config/java2.policy -Djava.awt.headless=true -Dhttp.webdir.enable=false</oacore_jvm_stop_options>
<oacore_nprocs oa_var="s_oacore_nprocs">1</oacore_nprocs>15/01/09 02:25:44.713 html: Broken pipe
15/01/09 02:25:44.724 html: Broken pipe
15/01/09 02:25:44.725 html: Broken pipe
15/01/09 02:25:44.725 html: Broken pipe
15/01/09 02:25:44.725 html: Broken pipe
15/01/09 02:25:44.725 html: Servlet error
java.io.IOException: Broken pipe
at sun.nio.ch.FileDispatcher.write0(Native Method)
at sun.nio.ch.SocketDispatcher.write(SocketDispatcher.java:29)
at sun.nio.ch.IOUtil.writeFromNativeBuffer(IOUtil.java:104)
at sun.nio.ch.IOUtil.write(IOUtil.java:75)
at sun.nio.ch.SocketChannelImpl.write(SocketChannelImpl.java:334)
at java.nio.channels.Channels.write(Channels.java:60)
at java.nio.channels.Channels.access$000(Channels.java:47)
at java.nio.channels.Channels$1.write(Channels.java:134)
at com.evermind.server.http.AJPOutputStream.endRequest(AJPOutputStream.java:117)
at com.evermind.server.http.AJPRequestHandler.run(AJPRequestHandler.java:317)
at com.evermind.server.http.AJPRequestHandler.run(AJPRequestHandler.java:199)
at oracle.oc4j.network.ServerSocketReadHandler$SafeRunnable.run(ServerSocketReadHandler.java:260)
at com.evermind.util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:303)
at java.lang.Thread.run(Thread.java:619)
15/01/09 02:25:44.696 html: Broken pipe
15/01/09 02:25:44.725 html: Broken pipe
15/01/09 02:25:44.725 html: Broken pipe
15/01/09 02:25:44.725 html: Broken pipe
15/01/09 02:25:44.726 html: Broken pipe
15/01/09 02:25:44.726 html: Servlet error
java.io.IOException: Broken pipe
at sun.nio.ch.FileDispatcher.write0(Native Method)
at sun.nio.ch.SocketDispatcher.write(SocketDispatcher.java:29)
at sun.nio.ch.IOUtil.writeFromNativeBuffer(IOUtil.java:104)
at sun.nio.ch.IOUtil.write(IOUtil.java:75)
at sun.nio.ch.SocketChannelImpl.write(SocketChannelImpl.java:334)
at java.nio.channels.Channels.write(Channels.java:60)
at java.nio.channels.Channels.access$000(Channels.java:47)
at java.nio.channels.Channels$1.write(Channels.java:134)
at com.evermind.server.http.AJPOutputStream.endRequest(AJPOutputStream.java:117)
at com.evermind.server.http.AJPRequestHandler.run(AJPRequestHandler.java:317)
at com.evermind.server.http.AJPRequestHandler.run(AJPRequestHandler.java:199)
at oracle.oc4j.network.ServerSocketReadHandler$SafeRunnable.run(ServerSocketReadHandler.java:260)
at com.evermind.util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:303)
at java.lang.Thread.run(Thread.java:619)
15/01/09 02:25:44.956 html: Broken pipe
15/01/09 02:25:44.956 html: Broken pipe
15/01/09 02:25:44.956 html: Broken pipe
15/01/09 02:25:44.956 html: Broken pipe
15/01/09 02:25:44.956 html: Broken pipe
15/01/09 02:25:44.956 html: Servlet error
java.io.IOException: Broken pipe
at sun.nio.ch.FileDispatcher.write0(Native Method)
at sun.nio.ch.SocketDispatcher.write(SocketDispatcher.java:29)
at sun.nio.ch.IOUtil.writeFromNativeBuffer(IOUtil.java:104)
at sun.nio.ch.IOUtil.write(IOUtil.java:75)
at sun.nio.ch.SocketChannelImpl.write(SocketChannelImpl.java:334)
at java.nio.channels.Channels.write(Channels.java:60)
at java.nio.channels.Channels.access$000(Channels.java:47)
at java.nio.channels.Channels$1.write(Channels.java:134)
at com.evermind.server.http.AJPOutputStream.endRequest(AJPOutputStream.java:117)
at com.evermind.server.http.AJPRequestHandler.run(AJPRequestHandler.java:317)
at com.evermind.server.http.AJPRequestHandler.run(AJPRequestHandler.java:199)
at oracle.oc4j.network.ServerSocketReadHandler$SafeRunnable.run(ServerSocketReadHandler.java:260)
at oracle.oc4j.network.ServerSocketAcceptHandler.procClientSocket(ServerSocketAcceptHandler.java:234)
at oracle.oc4j.network.ServerSocketAcceptHandler.access$700(ServerSocketAcceptHandler.java:29)
at oracle.oc4j.network.ServerSocketAcceptHandler$AcceptHandlerHorse.run(ServerSocketAcceptHandler.java:879)
at com.evermind.util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:303)
at java.lang.Thread.run(Thread.java:619)
15/01/09 02:25:45.9 html: Broken pipe
15/01/09 02:25:45.10 html: Broken pipe
15/01/09 02:25:45.10 html: Broken pipe
15/01/09 02:25:45.10 html: Broken pipe
15/01/09 02:25:45.10 html: Broken pipe
15/01/09 02:25:45.10 html: Servlet error
java.io.IOException: Broken pipe
at sun.nio.ch.FileDispatcher.write0(Native Method)
at sun.nio.ch.SocketDispatcher.write(SocketDispatcher.java:29)
at sun.nio.ch.IOUtil.writeFromNativeBuffer(IOUtil.java:104)
at sun.nio.ch.IOUtil.write(IOUtil.java:75)
at sun.nio.ch.SocketChannelImpl.write(SocketChannelImpl.java:334)
at java.nio.channels.Channels.write(Channels.java:60)
at java.nio.channels.Channels.access$000(Channels.java:47)
at java.nio.channels.Channels$1.write(Channels.java:134)
at com.evermind.server.http.AJPOutputStream.endRequest(AJPOutputStream.java:117)
at com.evermind.server.http.AJPRequestHandler.run(AJPRequestHandler.java:317)
at com.evermind.server.http.AJPRequestHandler.run(AJPRequestHandler.java:199)
at oracle.oc4j.network.ServerSocketReadHandler$SafeRunnable.run(ServerSocketReadHandler.java:260)
at com.evermind.util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:303)
at java.lang.Thread.run(Thread.java:619)
15/01/09 02:25:45.64 html: Broken pipe
15/01/09 02:25:45.64 html: Broken pipe
15/01/09 02:25:45.64 html: Servlet error
java.io.IOException: Broken pipe
at sun.nio.ch.FileDispatcher.write0(Native Method)
at sun.nio.ch.SocketDispatcher.write(SocketDispatcher.java:29)
at sun.nio.ch.IOUtil.writeFromNativeBuffer(IOUtil.java:104)
at sun.nio.ch.IOUtil.write(IOUtil.java:75)
at sun.nio.ch.SocketChannelImpl.write(SocketChannelImpl.java:334)
at java.nio.channels.Channels.write(Channels.java:60)
at java.nio.channels.Channels.access$000(Channels.java:47)
at java.nio.channels.Channels$1.write(Channels.java:134)
at com.evermind.server.http.AJPOutputStream.endRequest(AJPOutputStream.java:117)
at com.evermind.server.http.AJPRequestHandler.run(AJPRequestHandler.java:317)
at com.evermind.server.http.AJPRequestHandler.run(AJPRequestHandler.java:199)
at oracle.oc4j.network.ServerSocketReadHandler$SafeRunnable.run(ServerSocketReadHandler.java:260)
at com.evermind.util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:303)
at java.lang.Thread.run(Thread.java:619)
15/01/09 02:25:45.512 html: Broken pipe
15/01/09 02:25:45.512 html: Broken pipe
15/01/09 02:25:45.513 html: Broken pipe
15/01/09 02:25:45.513 html: Broken pipe
15/01/09 02:25:45.513 html: Broken pipe
15/01/09 02:25:45.513 html: Servlet error
java.io.IOException: Broken pipe
at sun.nio.ch.FileDispatcher.write0(Native Method)
at sun.nio.ch.SocketDispatcher.write(SocketDispatcher.java:29)
at sun.nio.ch.IOUtil.writeFromNativeBuffer(IOUtil.java:104)
at sun.nio.ch.IOUtil.write(IOUtil.java:75)
at sun.nio.ch.SocketChannelImpl.write(SocketChannelImpl.java:334)
at java.nio.channels.Channels.write(Channels.java:60)
at java.nio.channels.Channels.access$000(Channels.java:47)
at java.nio.channels.Channels$1.write(Channels.java:134)
at com.evermind.server.http.AJPOutputStream.endRequest(AJPOutputStream.java:117)
at com.evermind.server.http.AJPRequestHandler.run(AJPRequestHandler.java:317)
at com.evermind.server.http.AJPRequestHandler.run(AJPRequestHandler.java:199)
at oracle.oc4j.network.ServerSocketReadHandler$SafeRunnable.run(ServerSocketReadHandler.java:260)
at oracle.oc4j.network.ServerSocketAcceptHandler.procClientSocket(ServerSocketAcceptHandler.java:234)
at oracle.oc4j.network.ServerSocketAcceptHandler.access$700(ServerSocketAcceptHandler.java:29)
at oracle.oc4j.network.ServerSocketAcceptHandler$AcceptHandlerHorse.run(ServerSocketAcceptHandler.java:879)
at com.evermind.util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:303)
at java.lang.Thread.run(Thread.java:619)
15/01/09 02:25:45.549 html: Broken pipe
15/01/09 02:25:45.549 html: Broken pipe
15/01/09 02:25:45.549 html: Broken pipe
15/01/09 02:25:45.549 html: Broken pipe
15/01/09 02:25:45.549 html: Broken pipe
15/01/09 02:25:45.550 html: Servlet error
java.io.IOException: Broken pipe
at sun.nio.ch.FileDispatcher.write0(Native Method)
at sun.nio.ch.SocketDispatcher.write(SocketDispatcher.java:29)
at sun.nio.ch.IOUtil.writeFromNativeBuffer(IOUtil.java:104)
at sun.nio.ch.IOUtil.write(IOUtil.java:75)
at sun.nio.ch.SocketChannelImpl.write(SocketChannelImpl.java:334)
at java.nio.channels.Channels.write(Channels.java:60)
at java.nio.channels.Channels.access$000(Channels.java:47)
at java.nio.channels.Channels$1.write(Channels.java:134)
at com.evermind.server.http.AJPOutputStream.endRequest(AJPOutputStream.java:117)
at com.evermind.server.http.AJPRequestHandler.run(AJPRequestHandler.java:317)
at com.evermind.server.http.AJPRequestHandler.run(AJPRequestHandler.java:199)
at oracle.oc4j.network.ServerSocketReadHandler$SafeRunnable.run(ServerSocketReadHandler.java:260)
at com.evermind.util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:303)
at java.lang.Thread.run(Thread.java:619)
15/01/09 02:25:45.604 html: Broken pipe
15/01/09 02:25:45.605 html: Broken pipe
15/01/09 02:25:45.605 html: Broken pipe
15/01/09 02:25:45.605 html: Broken pipe
15/01/09 02:25:45.605 html: Broken pipe
15/01/09 02:25:45.605 html: Servlet error
java.io.IOException: Broken pipe
at sun.nio.ch.FileDispatcher.write0(Native Method)
at sun.nio.ch.SocketDispatcher.write(SocketDispatcher.java:29)
at sun.nio.ch.IOUtil.writeFromNativeBuffer(IOUtil.java:104)
at sun.nio.ch.IOUtil.write(IOUtil.java:75)
at sun.nio.ch.SocketChannelImpl.write(SocketChannelImpl.java:334)
at java.nio.channels.Channels.write(Channels.java:60)
at java.nio.channels.Channels.access$000(Channels.java:47)
at java.nio.channels.Channels$1.write(Channels.java:134)
at com.evermind.server.http.AJPOutputStream.endRequest(AJPOutputStream.java:117)
at com.evermind.server.http.AJPRequestHandler.run(AJPRequestHandler.java:317)
at com.evermind.server.http.AJPRequestHandler.run(AJPRequestHandler.java:199)
at oracle.oc4j.network.ServerSocketReadHandler$SafeRunnable.run(ServerSocketReadHandler.java:260)
at com.evermind.util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:303)
at java.lang.Thread.run(Thread.java:619)
15/01/09 02:25:45.609 html: Broken pipe
15/01/09 02:25:45.609 html: Broken pipe
15/01/09 02:25:45.609 html: Broken pipe
15/01/09 02:25:45.609 html: Broken pipe
15/01/09 02:25:45.609 html: Broken pipe
15/01/09 02:25:45.609 html: Servlet error
java.io.IOException: Broken pipe
at sun.nio.ch.FileDispatcher.write0(Native Method)
at sun.nio.ch.SocketDispatcher.write(SocketDispatcher.java:29)
at sun.nio.ch.IOUtil.writeFromNativeBuffer(IOUtil.java:104)
at sun.nio.ch.IOUtil.write(IOUtil.java:75)
at sun.nio.ch.SocketChannelImpl.write(SocketChannelImpl.java:334)
at java.nio.channels.Channels.write(Channels.java:60)
at java.nio.channels.Channels.access$000(Channels.java:47)
at java.nio.channels.Channels$1.write(Channels.java:134)
at com.evermind.server.http.AJPOutputStream.endRequest(AJPOutputStream.java:117)
at com.evermind.server.http.AJPRequestHandler.run(AJPRequestHandler.java:317)
at com.evermind.server.http.AJPRequestHandler.run(AJPRequestHandler.java:199)
at oracle.oc4j.network.ServerSocketReadHandler$SafeRunnable.run(ServerSocketReadHandler.java:260)
at com.evermind.util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:303)
at java.lang.Thread.run(Thread.java:619)
15/01/09 02:25:45.611 html: Broken pipe
15/01/09 02:25:45.611 html: Broken pipe
15/01/09 02:25:45.611 html: Broken pipe
15/01/09 02:25:45.611 html: Broken pipe
15/01/09 02:25:45.612 html: Broken pipe
15/01/09 02:25:45.612 html: Servlet error
java.io.IOException: Broken pipe
at sun.nio.ch.FileDispatcher.write0(Native Method)
at sun.nio.ch.SocketDispatcher.write(SocketDispatcher.java:29)
at sun.nio.ch.IOUtil.writeFromNativeBuffer(IOUtil.java:104)
at sun.nio.ch.IOUtil.write(IOUtil.java:75)
at sun.nio.ch.SocketChannelImpl.write(SocketChannelImpl.java:334)
at java.nio.channels.Channels.write(Channels.java:60)
at java.nio.channels.Channels.access$000(Channels.java:47)
at java.nio.channels.Channels$1.write(Channels.java:134)
at com.evermind.server.http.AJPOutputStream.endRequest(AJPOutputStream.java:117)
at com.evermind.server.http.AJPRequestHandler.run(AJPRequestHandler.java:317)
at com.evermind.server.http.AJPRequestHandler.run(AJPRequestHandler.java:199)
at oracle.oc4j.network.ServerSocketReadHandler$SafeRunnable.run(ServerSocketReadHandler.java:260)
at oracle.oc4j.network.ServerSocketAcceptHandler.procClientSocket(ServerSocketAcceptHandler.java:234)
at oracle.oc4j.network.ServerSocketAcceptHandler.access$700(ServerSocketAcceptHandler.java:29)
at oracle.oc4j.network.ServerSocketAcceptHandler$AcceptHandlerHorse.run(ServerSocketAcceptHandler.java:879)
at com.evermind.util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:303)
at java.lang.Thread.run(Thread.java:619)
15/01/09 02:25:45.613 html: Broken pipe
15/01/09 02:25:45.613 html: Broken pipe
15/01/09 02:25:45.613 html: Broken pipe
15/01/09 02:25:45.613 html: Broken pipe
15/01/09 02:25:45.613 html: Broken pipe
15/01/09 02:25:45.614 html: Servlet error
java.io.IOException: Broken pipe
at sun.nio.ch.FileDispatcher.write0(Native Method)
at sun.nio.ch.SocketDispatcher.write(SocketDispatcher.java:29)
at sun.nio.ch.IOUtil.writeFromNativeBuffer(IOUtil.java:104)
at sun.nio.ch.IOUtil.write(IOUtil.java:75)
at sun.nio.ch.SocketChannelImpl.write(SocketChannelImpl.java:334)
at java.nio.channels.Channels.write(Channels.java:60)
at java.nio.channels.Channels.access$000(Channels.java:47)
at java.nio.channels.Channels$1.write(Channels.java:134)
at com.evermind.server.http.AJPOutputStream.endRequest(AJPOutputStream.java:117)
at com.evermind.server.http.AJPRequestHandler.run(AJPRequestHandler.java:317)
at com.evermind.server.http.AJPRequestHandler.run(AJPRequestHandler.java:199)
at oracle.oc4j.network.ServerSocketReadHandler$SafeRunnable.run(ServerSocketReadHandler.java:260)
at oracle.oc4j.network.ServerSocketAcceptHandler.procClientSocket(ServerSocketAcceptHandler.java:234)
at oracle.oc4j.network.ServerSocketAcceptHandler.access$700(ServerSocketAcceptHandler.java:29)
at oracle.oc4j.network.ServerSocketAcceptHandler$AcceptHandlerHorse.run(ServerSocketAcceptHandler.java:879)
at com.evermind.util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:303)
at java.lang.Thread.run(Thread.java:619)
15/01/09 02:25:45.616 html: Broken pipe
15/01/09 02:25:45.616 html: Broken pipe
15/01/09 02:25:45.617 html: Broken pipe
15/01/09 02:25:45.617 html: Broken pipe
15/01/09 02:25:45.617 html: Broken pipe
15/01/09 02:25:45.617 html: Servlet error
java.io.IOException: Broken pipe
at sun.nio.ch.FileDispatcher.write0(Native Method)
at sun.nio.ch.SocketDispatcher.write(SocketDispatcher.java:29)
at sun.nio.ch.IOUtil.writeFromNativeBuffer(IOUtil.java:104)
at sun.nio.ch.IOUtil.write(IOUtil.java:75)
at sun.nio.ch.SocketChannelImpl.write(SocketChannelImpl.java:334)
at java.nio.channels.Channels.write(Channels.java:60)
at java.nio.channels.Channels.access$000(Channels.java:47)
at java.nio.channels.Channels$1.write(Channels.java:134)
at com.evermind.server.http.AJPOutputStream.endRequest(AJPOutputStream.java:117)
at com.evermind.server.http.AJPRequestHandler.run(AJPRequestHandler.java:317)
at com.evermind.server.http.AJPRequestHandler.run(AJPRequestHandler.java:199)
at oracle.oc4j.network.ServerSocketReadHandler$SafeRunnable.run(ServerSocketReadHandler.java:260)
at com.evermind.util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:303)
at java.lang.Thread.run(Thread.java:619)
15/01/09 02:25:45.635 html: Broken pipe
15/01/09 02:25:45.635 html: Broken pipe
15/01/09 02:25:45.635 html: Broken pipe
15/01/09 02:25:45.635 html: Broken pipe
15/01/09 02:25:45.635 html: Broken pipe
15/01/09 02:25:45.635 html: Servlet error
java.io.IOException: Broken pipe
at sun.nio.ch.FileDispatcher.write0(Native Method)
at sun.nio.ch.SocketDispatcher.write(SocketDispatcher.java:29)
at sun.nio.ch.IOUtil.writeFromNativeBuffer(IOUtil.java:104)
at sun.nio.ch.IOUtil.write(IOUtil.java:75)
at sun.nio.ch.SocketChannelImpl.write(SocketChannelImpl.java:334)
at java.nio.channels.Channels.write(Channels.java:60)
at java.nio.channels.Channels.access$000(Channels.java:47)
at java.nio.channels.Channels$1.write(Channels.java:134)
at com.evermind.server.http.AJPOutputStream.endRequest(AJPOutputStream.java:117)
at com.evermind.server.http.AJPRequestHandler.run(AJPRequestHandler.java:317)
at com.evermind.server.http.AJPRequestHandler.run(AJPRequestHandler.java:199)
at oracle.oc4j.network.ServerSocketReadHandler$SafeRunnable.run(ServerSocketReadHandler.java:260)
at com.evermind.util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:303)
at java.lang.Thread.run(Thread.java:619)
15/01/09 02:25:45.638 html: Broken pipe
15/01/09 02:25:45.638 html: Broken pipe
15/01/09 02:25:45.638 html: Broken pipe
15/01/09 02:25:45.639 html: Broken pipe
15/01/09 02:25:45.639 html: Broken pipe
15/01/09 02:25:45.639 html: Servlet error
java.io.IOException: Broken pipe
at sun.nio.ch.FileDispatcher.write0(Native Method)
at sun.nio.ch.SocketDispatcher.write(SocketDispatcher.java:29)
at sun.nio.ch.IOUtil.writeFromNativeBuffer(IOUtil.java:104)
at sun.nio.ch.IOUtil.write(IOUtil.java:75)
at sun.nio.ch.SocketChannelImpl.write(SocketChannelImpl.java:334)
at java.nio.channels.Channels.write(Channels.java:60)
at java.nio.channels.Channels.access$000(Channels.java:47)
at java.nio.channels.Channels$1.write(Channels.java:134)
at com.evermind.server.http.AJPOutputStream.endRequest(AJPOutputStream.java:117)
at com.evermind.server.http.AJPRequestHandler.run(AJPRequestHandler.java:317)
at com.evermind.server.http.AJPRequestHandler.run(AJPRequestHandler.java:199)
at oracle.oc4j.network.ServerSocketReadHandler$SafeRunnable.run(ServerSocketReadHandler.java:260)
at oracle.oc4j.network.ServerSocketAcceptHandler.procClientSocket(ServerSocketAcceptHandler.java:234)
at oracle.oc4j.network.ServerSocketAcceptHandler.access$700(ServerSocketAcceptHandler.java:29)
at oracle.oc4j.network.ServerSocketAcceptHandler$AcceptHandlerHorse.run(ServerSocketAcceptHandler.java:879)
at com.evermind.util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:303)
at java.lang.Thread.run(Thread.java:619)
15/01/09 02:25:45.650 html: Broken pipe
15/01/09 02:25:45.650 html: Broken pipe
15/01/09 02:25:45.650 html: Broken pipe
15/01/09 02:25:45.651 html: Broken pipe
15/01/09 02:25:45.651 html: Broken pipe
15/01/09 02:25:45.651 html: Servlet error
java.io.IOException: Broken pipe
at sun.nio.ch.FileDispatcher.write0(Native Method)
at sun.nio.ch.SocketDispatcher.write(SocketDispatcher.java:29)
at sun.nio.ch.IOUtil.writeFromNativeBuffer(IOUtil.java:104)
at sun.nio.ch.IOUtil.write(IOUtil.java:75)
at sun.nio.ch.SocketChannelImpl.write(SocketChannelImpl.java:334)
at java.nio.channels.Channels.write(Channels.java:60)
at java.nio.channels.Channels.access$000(Channels.java:47)
at java.nio.channels.Channels$1.write(Channels.java:134)
at com.evermind.server.http.AJPOutputStream.endRequest(AJPOutputStream.java:117)
at com.evermind.server.http.AJPRequestHandler.run(AJPRequestHandler.java:317)
at com.evermind.server.http.AJPRequestHandler.run(AJPRequestHandler.java:199)
at oracle.oc4j.network.ServerSocketReadHandler$SafeRunnable.run(ServerSocketReadHandler.java:260)
at com.evermind.util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:303)
at java.lang.Thread.run(Thread.java:619)
15/01/09 02:25:45.658 html: Broken pipe
15/01/09 02:25:45.658 html: Broken pipe
15/01/09 02:25:45.658 html: Broken pipe
15/01/09 02:25:45.658 html: Broken pipe
15/01/09 02:25:45.658 html: Broken pipe
15/01/09 02:25:45.659 html: Servlet error
java.io.IOException: Broken pipe
at sun.nio.ch.FileDispatcher.write0(Native Method)
at sun.nio.ch.SocketDispatcher.write(SocketDispatcher.java:29)
at sun.nio.ch.IOUtil.writeFromNativeBuffer(IOUtil.java:104)
at sun.nio.ch.IOUtil.write(IOUtil.java:75)
at sun.nio.ch.SocketChannelImpl.write(SocketChannelImpl.java:334)
at java.nio.channels.Channels.write(Channels.java:60)
at java.nio.channels.Channels.access$000(Channels.java:47)
at java.nio.channels.Channels$1.write(Channels.java:134)
at com.evermind.server.http.AJPOutputStream.endRequest(AJPOutputStream.java:117)
at com.evermind.server.http.AJPRequestHandler.run(AJPRequestHandler.java:317)
at com.evermind.server.http.AJPRequestHandler.run(AJPRequestHandler.java:199)
at oracle.oc4j.network.ServerSocketReadHandler$SafeRunnable.run(ServerSocketReadHandler.java:260)
at com.evermind.util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:303)
at java.lang.Thread.run(Thread.java:619)
15/01/09 02:25:45.674 html: Broken pipe
15/01/09 02:25:45.675 html: Broken pipe
15/01/09 02:25:45.675 html: Broken pipe
15/01/09 02:25:45.675 html: Broken pipe
15/01/09 02:25:45.675 html: Broken pipe
15/01/09 02:25:45.675 html: Servlet error
java.io.IOException: Broken pipe
at sun.nio.ch.FileDispatcher.write0(Native Method)
at sun.nio.ch.SocketDispatcher.write(SocketDispatcher.java:29)
at sun.nio.ch.IOUtil.writeFromNativeBuffer(IOUtil.java:104)
at sun.nio.ch.IOUtil.write(IOUtil.java:75)
at sun.nio.ch.SocketChannelImpl.write(SocketChannelImpl.java:334)
at java.nio.channels.Channels.write(Channels.java:60)
at java.nio.channels.Channels.access$000(Channels.java:47)
at java.nio.channels.Channels$1.write(Channels.java:134)
at com.evermind.server.http.AJPOutputStream.endRequest(AJPOutputStream.java:117)
at com.evermind.server.http.AJPRequestHandler.run(AJPRequestHandler.java:317)
at com.evermind.server.http.AJPRequestHandler.run(AJPRequestHandler.java:199)
at oracle.oc4j.network.ServerSocketReadHandler$SafeRunnable.run(ServerSocketReadHandler.java:260)
at com.evermind.util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:303)
at java.lang.Thread.run(Thread.java:619)
15/01/09 02:25:45.678 html: Broken pipe
15/01/09 02:25:45.678 html: Broken pipe
15/01/09 02:25:45.678 html: Broken pipe
15/01/09 02:25:45.678 html: Broken pipe
15/01/09 02:25:45.678 html: Broken pipe
15/01/09 02:25:45.678 html: Servlet error
java.io.IOException: Broken pipe
at sun.nio.ch.FileDispatcher.write0(Native Method)
at sun.nio.ch.SocketDispatcher.write(SocketDispatcher.java:29)
at sun.nio.ch.IOUtil.writeFromNativeBuffer(IOUtil.java:104)
at sun.nio.ch.IOUtil.write(IOUtil.java:75)
at sun.nio.ch.SocketChannelImpl.write(SocketChannelImpl.java:334)
at java.nio.channels.Channels.write(Channels.java:60)
at java.nio.channels.Channels.access$000(Channels.java:47)
at java.nio.channels.Channels$1.write(Channels.java:134)
at com.evermind.server.http.AJPOutputStream.endRequest(AJPOutputStream.java:117)
at com.evermind.server.http.AJPRequestHandler.run(AJPRequestHandler.java:317)
at com.evermind.server.http.AJPRequestHandler.run(AJPRequestHandler.java:199)
at oracle.oc4j.network.ServerSocketReadHandler$SafeRunnable.run(ServerSocketReadHandler.java:260)
at oracle.oc4j.network.ServerSocketAcceptHandler.procClientSocket(ServerSocketAcceptHandler.java:234)
at oracle.oc4j.network.ServerSocketAcceptHandler.access$700(ServerSocketAcceptHandler.java:29)
at oracle.oc4j.network.ServerSocketAcceptHandler$AcceptHandlerHorse.run(ServerSocketAcceptHandler.java:879)
at com.evermind.util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:303)
at java.lang.Thread.run(Thread.java:619)
15/01/09 02:28:40.342 html: 10.1.3.4.0 Stopped
15/01/09 02:29:23.990 10.1.3.4.0 Started
15/01/09 02:29:28.464 html: 10.1.3.4.0 Started
15/01/09 02:29:33.291 html: oracle.apps.fnd.security.LeakDetectionFilter.initialized:1420788573291
15/01/09 02:29:33.297 html: LeakSetting:
global:true,session:false,aggressive:false,stderr:false,appslog:false,corelog:false
ignoring:null
15/01/09 02:31:29.20 html: chain failed
com.evermind[Oracle Containers for J2EE 10g (10.1.3.4.0) ].server.http.HttpIOException: Broken pipe
at com.evermind[Oracle Containers for J2EE 10g (10.1.3.4.0) ].server.http.EvermindServletOutputStream.write(EvermindServletOutputStream.java:210)
at com.evermind[Oracle Containers for J2EE 10g (10.1.3.4.0) ].server.http.HttpApplication.include(HttpApplication.java:4198)
at com.evermind[Oracle Containers for J2EE 10g (10.1.3.4.0) ].server.http.ResourceFilterChain.doFilter(ResourceFilterChain.java:54)
at oracle.apps.jtf.base.session.ReleaseResFilter.doFilter(ReleaseResFilter.java:26)
at com.evermind[Oracle Containers for J2EE 10g (10.1.3.4.0) ].server.http.EvermindFilterChain.doFilter(EvermindFilterChain.java:15)
at oracle.apps.fnd.security.AppsServletFilter.doFilter(AppsServletFilter.java:318)
at com.evermind[Oracle Containers for J2EE 10g (10.1.3.4.0) ].server.http.FileRequestDispatcher.handleWithFilter(FileRequestDispatcher.java:133)
at com.evermind[Oracle Containers for J2EE 10g (10.1.3.4.0) ].server.http.FileRequestDispatcher.unprivileged_forwardInternal(FileRequestDispatcher.java:283)
at com.evermind[Oracle Containers for J2EE 10g (10.1.3.4.0) ].server.http.FileRequestDispatcher.access$100(FileRequestDispatcher.java:29)
at com.evermind[Oracle Containers for J2EE 10g (10.1.3.4.0) ].server.http.FileRequestDispatcher$2.oc4jRun(FileRequestDispatcher.java:254)
at oracle.oc4j.security.OC4JSecurity.doPrivileged(OC4JSecurity.java:284)
at com.evermind[Oracle Containers for J2EE 10g (10.1.3.4.0) ].server.http.FileRequestDispatcher.forwardInternal(FileRequestDispatcher.java:259)
at com.evermind[Oracle Containers for J2EE 10g (10.1.3.4.0) ].server.http.HttpRequestHandler.doProcessRequest(HttpRequestHandler.java:868)
at com.evermind[Oracle Containers for J2EE 10g (10.1.3.4.0) ].server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:453)
at com.evermind[Oracle Containers for J2EE 10g (10.1.3.4.0) ].server.http.AJPRequestHandler.run(AJPRequestHandler.java:313)
at com.evermind[Oracle Containers for J2EE 10g (10.1.3.4.0) ].server.http.AJPRequestHandler.run(AJPRequestHandler.java:199)
at oracle.oc4j.network.ServerSocketReadHandler$SafeRunnable.run(ServerSocketReadHandler.java:260)
at com.evermind[Oracle Containers for J2EE 10g (10.1.3.4.0) ].util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:303)
at java.lang.Thread.run(Thread.java:619)
15/01/09 02:31:29.20 html: Servlet error
java.io.IOException: Broken pipe
at sun.nio.ch.FileDispatcher.write0(Native Method)
at sun.nio.ch.SocketDispatcher.write(SocketDispatcher.java:29)
at sun.nio.ch.IOUtil.writeFromNativeBuffer(IOUtil.java:104)
at sun.nio.ch.IOUtil.write(IOUtil.java:75)
at sun.nio.ch.SocketChannelImpl.write(SocketChannelImpl.java:334) -
Obvious power issue effecting all back plane jks. Popping HOURLY (clocked) thru speakers, lites up lamp on doc scanner. Has blown power supply once. "Genius" diag NTF twice B4 power supply blew. Still have same trouble. I made very CLEAR to Genius Bar that it was a hardware issue after they continued to trouble shoot software. I was referred to tier 2 who told me they only worked on SOFTWARE. Does anyone know a more qualified shop who can fix an OBVIOUS mother board issue tracing back to the power supply? I had the same issue with a 20" with 7 visits & had to literally take a video of the trouble before they could figure out the trouble was the video card. From reading the sheer number of posts of the same trouble descriptions going back to 2007, it's all too obvious the path to MSFT is being taken.
-
I have a HP Pavilion dv6t 2300 laptop. Few days ago, the laptop suddenly stopped running with power issue. I bought a new battery thinking it was a battery issue. When I plug in the battery, AC led light won't turn on and the laptop won't charge. Soon as I take the battery out, AC led light is on.
I tried to turn on the laptop removing the battery with only AC power on, but it will not turn on either.
Is the the problem with the circuit board or is there any step I can do to make this work? Any help is much appreciated.Have you tried another charger to make sure the adapter isn't the problem?
I am a Volunteer to help others on here-not a HP employee.
Replies aren't online 24/7 because of Time Zone differences.
Remember in this Day and Age of Computing the Internet is Knowledge at your fingertips if you choose understand it. -2015-
Maybe you are looking for
-
HT5622 How do I get refund from unwanted iCloud upgrade?
I upgraded my iCloud storage thinking that it would allow me to upgrade to latest iOS system which I don't have room for. The iCloud upgrade is no use for this so I want to claim the money back. How do I do this?
-
Cannot Install SAP Crystal Reports 2011 on 64-bit Win 7
I am trying to install the 30-Day Trial of SAP Crystal reports 2011 on a Windows 7 64-bit pc and at the end of the installation, I receive the two errors below. I made sure I clicked 'Ran as Administrator' and under properties under the Compatibility
-
System copy based on export/import on MSCS
Hi, a NW 7.0 istance (BW usage) on MSCS... we would like to copy to new host (as dev refresh). This MSCS is made of: - host1 (first node) - host2 (second node) - mscdhost (mscs virtual host) - orahost (oracle virtualhost... on a dedicated group) - sa
-
SSF_API_NOSECTK error in SSFTEST program
I get the error message ssf_api_nosectk in the SSF test program called SSFTEST. I am running ECC 6.0 and think that I have installed the crypto library ok. I can see everything in STRUST and an able to generate PSEs, etc. The error message says that
-
Exporting project from Premiere Pro CS3 to Encore CS3
If I export and specify no menues and specify burn, medium quality to DVD, Encore asks me to insert blank media into a CD R/W drive. I have to cancel the operation and select the DVD R/W drive that is also displayed in the device delection.. How do I