Intermittent problem while typing in iphone5

Sometimes the touch screen goes super responsive.Example, the space-bar key responds before I even touch it; when I touch the back-space the space bar or "enter" functions. Whenever this happens intermittently, I just close the screen and restart it. However this is very frustrating. Is there any remedy?

Thanks for your suggestion. Will try for a few days without the case and try my luck

Similar Messages

I have a problem while typing in my MacBook pro. it is showing different characters when i type. for example: qw`e§r]t[y= this is how when we type "qwerty|" can anyone help me pls?

I have a problem while typing in my MacBook pro. it is showing different characters when i type. for example: qw`e§r]t[y= this is how when we type "qwerty|" can anyone help me pls?

You could just try changing your Input Sources under System Preferences>Language & Text:
But I kind of doubt that's going to work. It may be a hardware problem or a system problem. If you take it into Apple they might be able to determine which and might advise a reinstallation of System software. I would take it to an Apple Store or an AASP but, first, make sure that you have a backup just in case they suggest a clean install of the system.
Good luck,
Clinton

Safari autoselect problem while typing

Hello everyone.
I have a problem with Safari.
While I'am typing, Safari autoselect a website that I had visited before. It prevents me search by using adress bar. Let me give a example;
On the search bar when I'm writing a word starts with "go", Safari shows me "google.com". If I continue with "lden" , the suggestion "google.com" goes away and I can continue with word "golden .." and I can search easily. It is OK. The problem is that, sometimes I would like search about "informative topics". When I wrote "inf" , Safari suggest me a website (I visited before) and if I continue with "ormative topis" , the keyword "inf" goes and I see "ormative topics" on the adress bar.
As I observed . I encounter this problem while using words starts with "I" or "i".
I've searched on the net for solution. But I didn't find one.
Here is the link for another explanation the problem from somebody : http://forums.macrumors.com/showpost.php?p=18943811&postcount=61
I hope I can explain my problem clearly.
I will be glad for any suggestion.
Thanks !

Thank You for your really fast response, I'll just resign from hp products. Good that I just bought it and can give it back.

ALT+S problem while typing in Blend in Polish

Polish language has some special characters which are generated by pressing ALT+Letter (e.g. ALT+a=ą?, ALT+e=ę?, ALT s=ś?). Following the update of Blend to 1.2 pressing ALT+s while typing email sends the message to the recipients. It used to be the case in previous version of Blend but I believe it only worked if the Windows language was set to English. If Windows language was set to Polish pressing ALT+s did not cause the message to be sent.
This problems makes usign Blend for typing in Polish almost impossible. Any ideas for a solution or hopes this bug will be fixed in the upcoming version of Blend?

Same problem here :-( shortcut ctrl+enter is good enough please delete or make option to deactivate problematical alt+s shortcut thx for fast hotfix ^_^

Intermittent delay while typing

It's almost like the processor hasn't kicked in, then suddently it does. I have the settings maxed out for best performance, but it still happens. Sometimes the cursor hangs for a second. It's a short delay, but annoying... especially if I am typing. A sentence would look like this at times:
A sentence woullike this at times.
Any suggestions?

A few other things to try:
* Turn off all non-Oracle extensions (via the Tools->Preferences->Extensions page)
* Turn off "Enable Code Assist" on the Audit page in preferences (or increase the "Delay after edit" preference)
* Close the structure window
* Turn of code folding (Code Editor->Display->Show Code Folding Margin in Preferences)
Often one of the above things is responsible for slow performance when editing. I would try them one by one to figure out which one might be the likely culprit.
Brian

Deselecting cells while typing

I've been experiencing problems while typing in numbers on my mac, my iPhone and iPad.
It just keep "deselecting" the cell, I'm not sure how to explain it properly,
the scenario would pretty much like while inserting values into the cell, your kid or pet is playing with your mouse.
I need to try multiple times to be able to type in the correct value.
Does anyone experience the same problem I did?
Originally I thought it's my phone, but then it happens on my iPad, my Mac...
Please help!
Numbers: 3.2
Mac: OSX 10.9.4
iOS: 7.1.2

Check you system preferences with regard to the track pad. :
See if tap to click is checked.

After upgrade to iOS8 on my iPhone5, I do not see smart keyboard options while typing message or email text

after upgrade to iOS8 on my iPhone5, I do not see smart keyboard options while typing message or email text

Go to Settings>General>Keyboards>Predictive Text>ON. If it is on, you can toggle it off and then back on. The other method is to check in the typing area of the Messages app and it could be minimized. You would see a small line in the center just below the typing area. You would just need to put your finger on that small line and swipe upwards. But either should bring it back.

Hi, After I installed Mac Lion, I have problem with the tamil font while typing in Neo Office. Especially with the letters "e-Ex: தெ" and "ai-Ex:தை". Please help me I know its not bug from Apple It shd be some problem in neo.

Hi, After I installed Mac Lion, I have problem with the tamil font while typing in Neo Office. Especially with the letters "e-Ex: தெ" and "ai-Ex:தை". Please help me I know its not bug from Apple It shd be some problem in neo.

Is your problem due to the keyboard or to NeoOffice Characters? You have to change probably the font. Not all fonts are supporting all Unicode sets. Which font you have in your NeoOffice set to write Tamil? Try with Arial Unicode MS for example.
Are the letter e-Ex and ai-Ex right in your posting? If they are right, how you inserted these letters in your posting? By copy and paste or by typing? If by typing, your question is related to NeoOffice. Probably you should reinstall or update NeoOffice? Or switch to OpenOffice?
marek

Hai Matt I have a problem with download a new app. While I bought iphone5, I take iphone to shopkeeper for download some app and videos that he used his Apple ID . That's t problem now.. Not all the time his ID is appearing but some times hi

Hai Matt
I have a problem with download a new app. While I bought iphone5, I take iphone to shopkeeper for download some app and videos that he used his Apple ID . That's t problem now.. Not all the time his ID is appearing but some times his Apple ID is appearing that time I can't download app, videos, songs.. So please guide me to remove that ID or how to solve that..
Regards
Babu

Check Settings/iTunes and AppStore/AppleID and make sure that your AppleID is filled in. If not , sign out and sign in with the correct info.
To make sure that no other apps or videos are on your device than the one you bought, set it up as new device, explained here: How to back up your data and set up as a new device
Content that is not bought with your ID can't be used on your phone, that's why his ID and password is asked when you try to use those apps downloaded in the store.

G530 Keyboard problem, cursor jumps back while typing

This has been going on for a while. I will be typing and the cursor will jump back a bit and it will mess up what im typing. Also my touchpad sort of spazzes out now and then. Any help for this? Im running Windows 7.

Hi, I have the same issue with my Y430 Laptop. Can you tell me what helped you to fix this issue?
keeewi wrote:
hello, I have also same problem on my Y430 Keyboard problem, cursor jumps back while typing.
Could you please contact me for how to find right driver to reinstall for touch pad?
Thank you

A web developer problem while running a web application

Hi all,
I'm novice to J2EE.
I've encountered a problem while accessing the deployed module in weblogic 8.1 server.
I'm sure that the webapplication module is deployed as i saw my module in administration console & also the status said that it is deployed.
when i access my web application by specifying the proper server and port no and context root it is showing
either 505 - resource not found error(http://localhost:7001/Suresh-2/Suresh) or 404 - not found error.( http://localhost:7001/Suresh-2/Suresh)
Now let me elaborate what i've done till now.
My webapplication folder structure is : C:\bea\user_projects\domains\mydomain\applications\Suresh\WEB-INF\classes\Sai\ServExamp.class
My servlet is ServExamp.java
I created a folder called "Suresh". In that folder created another folder called "WEB-INF". In WEB-INF created a folder called "Classes".
Since my servlet is in package "Sai", the .class file reside in \Suresh\WEB-INF\Classes\Sai\ServExamp.class
The source code is :
package Sai;
import javax.servlet.*;
import javax.servlet.http.*;
import java.io.*;
public class ServExamp extends HttpServlet
public void doPost(HttpServletRequest req,HttpServletResponse res)throws IOException
PrintWriter out=res.getWriter();
java.util.Date today=new java.util.Date();
out.println("<html>"+"<body>"+
"<h1 align=center>HF\'s Chapter1 Servlet </h1>"
+"<br>"+today+"</body>"+"</html>");
Now i'm almost done creating a web application. Next, I constructed a simple web.xml descriptor that gives a web friendly name for my servlet, and points to the servlet. I constructed web.xml descriptor file in the WEB-INF folder (C:\bea\user_projects\domains\mydomain\applications\Suresh\WEB-INF\).
The web.xml file source is :
<!DOCTYPE web-app
PUBLIC "-//Sun Microsystems, Inc.//DTD Web Application 2.3//EN"
"http://java.sun.com/dtd/web-app_2_3.dtd">
<web-app>
<display-name>Hello World Web Application</display-name>
<description>Test Servlet</description>
<servlet>
<servlet-name>ServExamp</servlet-name>
<servlet-class>Sai.ServExamp</servlet-class>
</servlet>
<servlet-mapping>
<servlet-name>ServExamp</servlet-name>
<url-pattern>/Suresh</url-pattern>
</servlet-mapping>
</web-app>
Now I have told Weblogic that the URI /Suresh corresponds to my servlet "Sai.ServExamp".
My Web Application is ready to be deployed at this point. I logged onto Weblogic's admin console,
1) clicked on deployments, then navigated to "Web Application Modules" .
2) Clicked "Deploy new Web Application Module"
3) Navigated to the location of your web application folder (Suresh). There was a radio button next to it indicating that I can select that folder as a valid web application.
4) I Clicked that radio button and clicked "Target Module".
5) It informed that my web application "Suresh" will be deployed to myServer.It asked a name for my web application deployment. By default it was "Suresh"
I clicked Deploy.
6) After deployment, my web application "Suresh" appeared in the "Web Application Modules" tree on the left.
I Clicked on "Suresh"( my web application) then clicked the testing tab, then clicked the link shown there(http://localhost:7001/Suresh-2).
It was not showing my servlet (showed a 403 error)
Error - 403
This status code is commonly used when the server does not wish to reveal exactly why the request has been refused, or when no other response is applicable.
I think so it came b'coz I don't have an index.html or index.jsp page.
7)Instead,I added my servlet on to the URL it provided.
http://localhost:7001/Suresh-2/Suresh
It is showing these error code: Http: 505 resource not allowed
The page cannot be displayed
The page you are looking for cannot be displayed because the address is incorrect.
Please try the following:
If you typed the page address in the Address bar, check that it is entered correctly.
Open the localhost:7001 home page and then look for links to the information you want.
Click Search to look for information on the Internet.
when i just type : http://localhost:7001/ -> Error 404 not found error
it's showing
Error 404--Not Found
From RFC 2068 Hypertext Transfer Protocol -- HTTP/1.1:
10.4.5 404 Not Found
The server has not found anything matching the Request-URI. No indication is given of whether the condition is temporary or permanent.
If the server does not wish to make this information available to the client, the status code 403 (Forbidden) can be used instead. The 410 (Gone) status code SHOULD be used if the server knows, through some internally configurable mechanism, that an old resource is permanently unavailable and has no forwarding address.
I want to run my web application & any help would be appreciated.
Thanks in advance.
with regards,
S.SayeeNarayanan.
Note: I even deployed my war file, which i got by execution of (jar cv0f webapp.war . ) command from the root directory of my web application i.e. Suresh
Then executed my webapplication it is showing
error-505 resource not allowed.
--------------------------------------------------------------------------------------------

try a fully qualified path to the pem file

A small problem while running my webapplication

Hi all,
I'm novice to J2EE.
I've encountered a problem while accessing the deployed module in weblogic 8.1 server.
I'm sure that the webapplication module is deployed as i saw my module in administration console & also the status said that it is deployed.
when i access my web application by specifying the proper server and port no and context root it is showing
either 505 - resource not found error(http://localhost:7001/Suresh-2/Suresh) or 404 - not found error.( http://localhost:7001/Suresh-2/Suresh)
Now let me elaborate what i've done till now.
My webapplication folder structure is : C:\bea\user_projects\domains\mydomain\applications\Suresh\WEB-INF\classes\Sai\ServExamp.class
My servlet is ServExamp.java
I created a folder called "Suresh". In that folder created another folder called "WEB-INF". In WEB-INF created a folder called "Classes".
Since my servlet is in package "Sai", the .class file reside in \Suresh\WEB-INF\Classes\Sai\ServExamp.class
The source code is :
package Sai;
import javax.servlet.;*
import javax.servlet.http.;*
import java.io.;*
public class ServExamp extends HttpServlet
public void doPost(HttpServletRequest req,HttpServletResponse res)throws IOException
PrintWriter out=res.getWriter();
java.util.Date today=new java.util.Date();
out.println("<html>"+"<body>"+
*"<h1 align=center>HF\'s Chapter1 Servlet </h1>"*
+"<br>"+today+"</body>"+"</html>");
Now i'm almost done creating a web application. Next, I constructed a simple web.xml descriptor that gives a web friendly name for my servlet, and points to
the servlet. I constructed web.xml descriptor file in the WEB-INF folder (C:\bea\user_projects\domains\mydomain\applications\Suresh\WEB-INF\).
The web.xml file source is :
*<!DOCTYPE web-app*
PUBLIC "-//Sun Microsystems, Inc.//DTD Web Application 2.3//EN"
*"http://java.sun.com/dtd/web-app_2_3.dtd">*
*<web-app>*
*<display-name>Hello World Web Application</display-name>*
*<description>Test Servlet</description>*
*<servlet>*
*<servlet-name>ServExamp</servlet-name>*
*<servlet-class>Sai.ServExamp</servlet-class>*
*</servlet>*
*<servlet-mapping>*
*<servlet-name>ServExamp</servlet-name>*
*<url-pattern>/Suresh</url-pattern>*
*</servlet-mapping>*
*</web-app>*
Now I have told Weblogic that the URI /Suresh corresponds to my servlet "Sai.ServExamp".
My Web Application is ready to be deployed at this point. I logged onto Weblogic's admin console,
*1) clicked on deployments, then navigated to "Web Application Modules" .*
*2) Clicked "Deploy new Web Application Module"*
*3) Navigated to the location of your web application folder (Suresh). There was a radio button next to it indicating that I can select that folder as a*
valid web application.
*4) I Clicked that radio button and clicked "Target Module".*
*5) It informed that my web application "Suresh" will be deployed to myServer.It asked a name for my web application deployment. By default it was "Suresh"*
I clicked Deploy.
*6) After deployment, my web application "Suresh" appeared in the "Web Application Modules" tree on the left.*
I Clicked on "Suresh"( my web application) then clicked the testing tab, then clicked the link shown there(http://localhost:7001/Suresh-2).
It was not showing my servlet (showed a 403 error)
Error - 403
This status code is commonly used when the server does not wish to reveal exactly why the request has been refused, or when no other response is applicable.
I think so it came b'coz I don't have an index.html or index.jsp page.
*7)Instead,I added my servlet on to the URL it provided.*
http://localhost:7001/Suresh-2/Suresh
It is showing these error code: Http: 505 resource not allowed
The page cannot be displayed
The page you are looking for cannot be displayed because the address is incorrect.
Please try the following:
If you typed the page address in the Address bar, check that it is entered correctly.
Open the localhost:7001 home page and then look for links to the information you want.
Click Search to look for information on the Internet.
when i just type : http://localhost:7001/ -> Error 404 not found error
it's showing
Error 404--Not Found
From RFC 2068 Hypertext Transfer Protocol -- HTTP/1.1:
*10.4.5 404 Not Found*
The server has not found anything matching the Request-URI. No indication is given of whether the condition is temporary or permanent.
If the server does not wish to make this information available to the client, the status code 403 (Forbidden) can be used instead. The 410 (Gone) status code
SHOULD be used if the server knows, through some internally configurable mechanism, that an old resource is permanently unavailable and has no forwarding
address.
I want to run my web application & any help would be appreciated.
Thanks in advance.
with regards,
S.SayeeNarayanan.
Note: I even deployed my war file, which i got by execution of (jar cv0f webapp.war . ) command from the root directory of my web application i.e. Suresh
Then executed my webapplication it is showing
error-505 resource not allowed.
--------------------------------------------------------------------------------------------

cross posted (amazingly dukes offered in both)

My magic mouse behaves erratically with intermittent problems - slows down, right click doesn't work, disconnects for a few seconds then reconnects. Anyone suggest what I could do to fix this?

My magic mouse behaves erratically with intermittent problems - slows down, right click doesn't work, disconnects for a few seconds then reconnects. Anyone suggest what I could do to fix this?

I just figured out the print quality issue for my wife with her new iMac and new printer.
She replaced both at once and she couldn't understand why her Artisan 730 was lower quality then her Epson R280 when they had the same specs.
Turns out the newer printer had the option to connect via wifi which we used during setup.
The driver options are completely different depending on how you connect.
Once I connected via USB the correct options were available and the print quality was better.
Looking at the R2400 it dies not have wifi, but while researching the problem for my wife someone esle was having an issue updating to the latest printer driver.
If you go into the print utility from the Printer and Scanner system preference and under the general tab you should have driver 5.5.
One user had to delete the old printer driver before Software Update loaded the newer printer driver.
https://discussions.apple.com/message/15947486#15947486
On my MacBook Pro (w Snow Leopard) I always had to reconnect my wifi at home when it woke up. I upgraded my router from an old Netgear to a newer N D-Link and stopped having to do that.
I would be surprised you would have that problem with an Airport Extreme, you might check to see if there is a firmware update for it.

Apple Mail syncing while typing, multiple updates on BB for same message.

First of all, thanks for looking and helping. Second, it's probably my fault as I am a tweaker often to my detriment. So, with disclaimers out of the way, here's what is happening:
I have a MacBook Pro and my mail is IMAP from my GMail account. When I respond to an email on the Apple, using Apple Mail, WHILE I AM TYPING, the BB retrieves a NEW email with the latest installment of the email!!! Here's an example that just happened:
Open email, start replying... "Paul, I wanted to explain"
BB announces new mail with that sentence
I continue typing... "why I like pasta"
BB announces new email with "Paul, I wanted to explain why I like pasta"
Etc., etc., etc.
So, my work around it to go to gmail.com and write the email within that program as opposed to using Apple Mail on laptop.
My BB is Tour 9630 with 4.7.1 and the Gmail app is 2.0.7, if it matters.
The Apple is running OS X 10.6.2 and Apple Mail is 4.2
Oh, Bluetooth is not turned on on either device.
Let me know if you need any further info. Thanks again for looking!
Peace.
Solved!
Go to Solution.

I have the same problem.
Just bought the MAC book Pro and while typing on Apple mail everything is syncing on my Blackberry,...This will go on until I finish the mail..Depending on the length of the mail, I can heave more than 15 copies of the same mail that is redundant and constantly updating. Frustrating. I did unchecked the box under preferences, mail box behavior but nothing happened. Has anyone figured out what is the solution?
Thanks

Keyboard lag while typing

I was wondering if anyone else experienced a lag in the on screen keyboard while typing in certain apps? I have an app that lets me text my friends but as I try to type I can type out a whole sentence or two before the words on appear on screen. Does anyone know why this happens or how I might fix it? In advance thank you for any and all help

I've had this happen a time or two on my iPad. Usually quitting the app and restarting it solves the problem.
Go to the Home screen and double click the Home button. That will reveal the row of recently used apps at the bottom of the screen. Tap and hold on the app in question until it jiggles and displays a minus sign. Tap the minus sign to actually quit the app. Then tap anywhere on the screen above that bottom row to return the screen to normal. Then restart the app and see if it works normally.

Intermittent problem while typing in iphone5

Similar Messages

Maybe you are looking for