Intermittent Sound Issues - HP Pavillion dv6700 Entertainment Laptop

Hi,
I have a HP Pavillion dv6700 Entertainment Laptop running Windows Vista 32bit Home Premium and have been running into some strange sound issues first.  
First, on occassion when I start my laptop I will get a "No Audio Output Device Installed" Message, and no sound controllers show up in the device manager.  Strangely, sometimes if I restart the laptop or put it into hibernation and bring it back, the output device will again work.
Also, when it is working I am experiencing other strange issues.  Often, sound will work only through headphones, and not through the built in Altec Lansing speakers.  Other times, even with the headphones plugged in, I only get sound through the speakers.  And sometimes, no sound through either, even though the computer at this point is showing a working audio device.
Lastly, when the sound does work through the speakers, it is normally crackling and distorted - it doesn't sound right at all.
The sound device installed on the computer is Contextant Smart Audio 221 (At least when it chooses to be working...)
I hope there is a solution to this problem, thank you very much for any support!
Message Edited by Holte2005 on 05-12-2009 02:52 PM

I also have a HP Pavillion laptop, with Windows Vista..  I am having sound issues, but not the same ones..  mine often displays the volume bar on the screen, clicking like I'm turning it up or down.. I can't get it to stop or go away.. I usually have to reboot and most of the time it stops, until the next time I open the laptop.  Also, when it's not doing this, I can't control my volume from the touch pad volume control at the top of my keyboard.  I thought maybe it was just damaged because it seems to have some scratches in that area where the top connects when closed, but I didn't think it made sense that rebooting will stop this, even temporarily.  I have uninstalled and reinstalled the drivers, however, one driver didn't come back.. it actually seemed to be better at first, but now I have to reboot it almost everytime I open it.  I thought if I didn't leave it in hibernation, just turn it off, while not using it, that would help, it didn't.  I have also tried updating the drivers and they are updated.. If anyone knows what else I can do, please help, it's terribly annoying, plus I have a lot of music on it, I'd like to listen to it sometime.

Similar Messages

  • Can someone help me with a DVD burner issue on an HP Pavillion dv6700 series laptop?

    Hello all. I have a HP Pavillion dv6700 laptop with a pioneer dvd rw k17b internal DVD burner drive. I recently have been experiencing issues with burning DVDs. It is saying that my burn speed is too low or the DVD is not compatible with the write speed of the burner and will not burn anything. I didn't have this problem until recently and it burned other DVDs fine until then. I have tried numerous brands of DVDs and none of them seem to work. I have also noticed that only the write speed of 2.4x shows in the drop down menu now...it had other options before. I have looked for firmware updates for the DVD burner and there isn't any. I have also checked device manager to make sure DMA was enabled and even tried uninstalling the driver and allowing windows to reinstall it upon reboot. I am running windows 7 operating system and have no clue what has happened to keep me from burning at a higher speed. I have also tried different burning software programs to see if I can get around it...no luck that way either. What has happened and how can I fix this? Any suggestions would be greatly appreciated! Thanks

    Hello all. I have a HP Pavillion dv6700 laptop with a pioneer dvd rw k17b internal DVD burner drive. I recently have been experiencing issues with burning DVDs. It is saying that my burn speed is too low or the DVD is not compatible with the write speed of the burner and will not burn anything. I didn't have this problem until recently and it burned other DVDs fine until then. I have tried numerous brands of DVDs and none of them seem to work. I have also noticed that only the write speed of 2.4x shows in the drop down menu now...it had other options before. I have looked for firmware updates for the DVD burner and there isn't any. I have also checked device manager to make sure DMA was enabled and even tried uninstalling the driver and allowing windows to reinstall it upon reboot. I am running windows 7 operating system and have no clue what has happened to keep me from burning at a higher speed. I have also tried different burning software programs to see if I can get around it...no luck that way either. What has happened and how can I fix this? Any suggestions would be greatly appreciated! Thanks

  • Intermittent sound issue

    Hi,
    Hope someone can help with this issue I'm having. It seems to be an intermittent issue but has started to happen more often recently.
    Originally around a few months ago I would turn on all my devices (TV, AV Receiver and YouView Box) and I would not get any sound (I do get picture). By just switching channels, the sound would then be heard. I presumed it was a problem with the HDMI connections and it didnt happen all the time so not such an issue.
    More recently (in the last 4 weeks) switching channels no longer returns the sound. I need to switch the you view box off and then back on to get sound. Again not such a big issue as although it was happening more often it was a simple work around.
    However in the last few days the problem has gotten worse. Now instead of the no sound occurring when I switch everything on, the sound is turning off when I change channels and also when I'm just watching a channel. Again the fix is to just switch the you view box off and back on but because its happening at least once when I switch on and then at least once when I'm watching tv I'm actually starting to get a bit annoyed.
    Could this be my setup or equipment or a problem with the youview box?
    My you view software is; manufacturer 18.3.0, component 2.5.6, platform 1017 and ISP 90.
    The you view is connected to a Onkyo TX-SR390 and then onto a LG 50PK590. All done vie HDMI.
    Thanks
    Rob

    Hi Jamie et al,
    From the reports above, it appears there is an intermittent compatibility issue between the YouView Humax box and Onkyo A/V receivers. I'm not aware of any issues with other A/V receivers but it is not clear which of the devices is at fault.
    There are two simple workarounds:
    1. Set HDMI Audio Format to Stereo (no good if you want surround sound from HD channels and Video on Demand).
    2. Use an S/PDIF optical cable as Onkyo advised.
    Option 2 is the best option - you just need a suitable optical (TOSlink) cable - available from the BT Shop or many high street shops for a few pounds (or eBay).
    On the YouView STB be sure to set S/PDIF Audio Format to Surround (in Settings - TV Signal & Quality).
    On the Onkyo receiver you should find a digital input screen that lets you assign the appropriate optical input to be associate with a particular HDMI input. See page 46 of the Onkyo TX-NR525 manual to assign the Optical audio input to your YouView source - this should override the HDMI audio.
      http://www.intl.onkyo.com/downloads/manuals/pdf/tx-nr525_manual_e.pdf
    Note there is no loss of quality doing this with a YouView box - you will still get 5.1 Dolby Digital audio from programmes that have surround sound (e.g. some HD films, sport and drama on Freeview and Extra TV channels as well as Video on Demand).
    (Note BluRay players can take advantage of the extra bandwidth available on HDMI to output Dolby True HD 7.1 etc which is not available over S/PDIF but I'm not aware of any Set Top Boxes that offer 7.1 audio).
    I'll see if we can reproduce this and raise it as an issue if we can - thanks for providing the feedback from Onkyo.
    Please let us know if this solves your problem or if you need any help.
    BT TV Expert
    I am a BT Employee and an expert on TV queries. I am here to give advice primarily on the BT Vision+ box. Go Here for more info.
    If my post has been helpful, please click on the Ratings star on the left-hand side of the post.

  • Sound issues with a Pavilion dv7 laptop, please help!

    Hi everyone!
    I have the Pavilion dv7 laptop and LOVE IT!  It's a great machine and has amazing features, especially some quality sound, when it works.  I'm looking for some help with this problem.  I can fire it up and have sound.  And then the sound will cut our and when I go down to the volume and open up the sound properties, my speakers are missing and it says it's using an HP dock, which I don't even have.  Sometimes, it will say that it's using headphones.  But the option for my speakers does not show up.
    I can reboot and sometimes that will help and it will fire back up with sound, sometimes not.  I'm looking for suggestions on what to do to keep my sound from going out.  
    Thanks in advance!
    -Sean :-)

    Likely the AC power jack has gone bad and needs to be replaced. Not sure why or how it can work if you remove ACPI support but the jack does have a pin that carries data to the motherboard and I suspect yours is bad. This is the part and what it looks like. It is a middle-difficulty replacement, at worst.
    Part:
    http://www.ebay.com/itm/HP-DV7-3000-DV7-3100-Series-DC-Power-Jack-Cable-/220895749025?pt=LH_DefaultD...
    Manual:
    Service Guide

  • Intermittent sound issue key clicks are silent

    Any suggestions on why the clicking sounds come and go when I type on my iPhone?  I had my iPhone 4 replaced several times and have since upgraded to a 5s and still have the same issue.  When the key sounds aren't working I won't get a sound notification when I receive a text or e-mail.  It is not the volume control set to mute or the switch on the side.  Power cycle does not solve the problem. 

    Hello Britmor,
    Thanks for using Apple Support Communities.
    I would recommend you reset your iPhone, as is explained in the iPhone User Guide:
    Restart or reset iPhone - iPhone
    http://help.apple.com/iphone/7/#/iph3e503f70
    Take care,
    Alex H.

  • HP 4730s win 7/64 - SRS Premium Sound issue

    I have a new Probook 4730s with intermittent buzzing sound issues. I have used HP Support Assist to download the latest drivers, but the problem is not resolved. It happens with internet streaming and cd or dvd/Blueray playback as well. Very frustrating!!! Any help would be appreciated.

    Identical laptop, and problem. The intermittent distortion is more frekvent when CPU-load increases 

  • Sound just suddenly stopped on my laptop

    I am on my laptop and all of a sudden there is no sound. I checked the volume, it is on, I tried turning the laptop on and off and that still didn't help.
    I am unsure of what to do, I went into control panel, clicked on system and security, find and fix problems and followed the instructions, that did not work. Said troubleshooting couldn't identify the problem. I have no idea what to do next. It was working while I was listening to a youtube video, then it just stopped.
    Any advice for a not-so-savvy computer person.
    Thanks,
    LI Roe
    I have a HP Pavilion dv7-6c95dx Entertainment PC
    Product a6x02ua#aba   
    Windows 7 Home Premium 64 bit - Service Pack 1
    This question was solved.
    View Solution.

    Hello LlRoe,
    I see that you are having problems with the sound on your HP computer. I have some suggestions that may help with this issue.
    Here is a link to some troubleshooting steps for sound issues on your computer. It includes some steps you already tried but continue past those and try the other steps including reinstalling the sound drivers.
    ↙-----------How do I give Kudos?| How do I mark a post as Solved? ----------------↓

  • HP wife mouse not working on Pavillion DV6700

    Hello,
    I have a HP Pavillion DV6700 laptop computer with Intel Wireless WiFI Link 4965AGN and I have installed Windows 7 on it (originally it came with Windows Vista).  I just bought a HP wife mouse but it's not working.  Whenever I try to pair the device I get the error message "softAP not working".  I checked on this forum and there are some suggestions like updating the Intel Wifi driver which I did but nothing seems to help.  I also read somewhere that with some older generation wifi adapters, the new wifi mouse is not compatible.
    How can I find out if the wife mouse is compatible with my laptop/wifi adapter?  I don't want to spend hours and hours trying to make it work if there is a compatibility issue.
    Thanks for your help in advance.
    raffi

    Hello TwistedJ,
    It would appear by your description that the mouse is faulty. If this behaviour started since the mouse was new 2 years ago, you should have returned it to the store you purchased it for a replacement or contacted HP Support directly for warranty help.
    HP warranties its wireless mice for up to one year.
    There is really nothing you can do at this point.
    I'm sorry.
    I do not work for HP.

  • Intermittent sound using dd live pack, spdif to home theater spdif.

    . when using dd li've pack to listen to audio through home theater, connecting spdif out on elite pro module to spdif in, i have only intermittent sound. there is no common timing, just sound on and off. as the sound comes on, on my computer i have the dolby digital li've bitstream out "bug" that comes on in the lower left hand corner of my screen, then goes away when sound off. i am listening in entertainment mode. i don't really know what else to say. does anyone else have this [email protected]

    G? A lot of Audigy DDL users have reported 5. signal being lost randomly.
    Mine cuts out and Dolby Digital Li've becomes plain PCM (stereo on the receiver). It only does it for a second, then 5. gets restored. Then a few seconds/minutes/hours later it happens again.
    Sounds somewhat related to the X-Fi issues.... perhaps is the same thing?
    heavyd wrote:
    when using dd li've pack to listen to audio through home theater, connecting spdif out on elite pro module to spdif in, i have only intermittent sound. there is no common timing, just sound on and off. as the sound comes on, on my computer i have the dolby digital li've bitstream out "bug" that comes on in the lower left hand corner of my screen, then goes away when sound off. i am listening in entertainment mode. i don't really know what else to say. does anyone else have this problem?

  • Sound issues when playing games

    The sound works perfectly fine on my laptop when on the internet and even plaing league of legend or some steam games but for some reason i have no sound on certain games such as sims 3 when i play them? i have the volume on and i know it SHOULD be working. Why is it doing this and how do i fix it?

    Hi and welcome to the community! Since you're new please be sure that you have checked out our Discussion guidelines.
    I suggest that you try to repair the phone software using PC Companion..
    Before repairing your device you may want to backup your information first. Check out this topic for more information on how to.
    How to backup?
    If the issue should still remain I think that this needs to be examined and fixed at a repair center. For more information about how to submit your phone for repair and where, contact your local support team.
     - Official Sony Xperia Support Staff
    If you're new to our forums make sure that you have read our Discussion guidelines.
    If you want to get in touch with the local support team for your country please visit our contact page.

  • Strange sound issue on iPad2

    my mom is having odd sound issues on her iPad 2 that i was able to somewhat fix. and it goes from fixed back to broken o.O
    i thought it was interesting and worth mentioning, in case this happens to anyone else.
    her iPad 2 is up to date on the latest iOS (5.0.1) and the issue occured while she was watching a video in YouTube. sound is totally off in all apps. in Settings>General under 'use side switch to' it is set to 'mute'. when going to Settings>General>Sounds the volume control for ringers will work and cause the ringtone to play, so it seems the speaker itself is fine. however it will only work there and for that short time. afterward sound will continue to remain off. the volume control on the side of the unit will bring up the on screen speaker icon, except it doesnt show the bar that usually goes up and down with the volume. and sometimes at the top of the grey box it will say 'sound effects'. ive also tried switching the mute on and off which changes nothing.
    the one thing ive found that changes anything is the multi tasking bar volume control (double clicking the home button and then sliding all the way to the left, where it shows a screen orientation lock, brightness slider and a volume control bar). now the volume control bar is unfilled and doesnt show the dot that you can slide up and down to change the volume. however when i plug the iPad 2 into a computer (any computer seems to cause this) the volume control bar will suddenly fill and the dot will appear. now suddenly sound works in all apps and will change with the side control again as normal.
    now heres where it gets even weirder!!!
    sometimes when unplugging the iPad 2, after a short while volume will slowly fade out and be unresponsive again. the side buttons stop working and the volume control in the multi tasking bar will be unfilled and unresponsive. repeatedly plugging it in, going back to the multi tasking bar volume control and unplugging will eventually bring volume back. a couple times ive gotten volume to stay on and the volume bar to stay responsive by unplugging it while im in the multi tasking bar. but sometimes this is not the case.
    for the record, ive tried 'turning it off and on again' and resetting all settings and erasing all content and settings (both with starting up from a back up on iCloud and PC, and starting up as a new iPad). ive used two different laptops, one with Windows Vista and one with Windows 7. the iPad is synced with one laptop but aside from using iTunes to back it up and for charging, ive not made any changes to the iPad using these devices. during the entire duration of my attempts to fix it, the iPad has been on no lower than 80% power. ive also called Apple and discussed this with an Apple Care representative. who suggested all the same things id already done, and walked me through all the fixes to make sure i didnt skip anything.
    hopefully and most probable is that its just an issue with iOS 5.0.1. i also have an iPad 2 thats up to date with 5.0.1 and ive not had this issue, YET.
    i just thought it would be beneficial to the community to share this issue and get word out that this is happening. i would like to hear everyones thoughts on this issue and if this has happened to anyone else. the Apple Representative that i spoke to had not heard of or had to deal with this issue so it sounds like its rather new or rare. though she did mention that this is not normal behavior for the device and might be a software issue.
    id like to conclude with my love for Apple, and how user friendly iDevices are in general. ive had iPods from the very first generation and all of them still work (though the older ones cant be updated past a certain iOS). the few issues ive ever had were easily fixed with a visit to the Apple Store or searching on the Apple Support Communities. so as with before, i will remain positive and look forward to a bug fix in the next update.
    -thanks in advanced for reading, and any comments
    Paper_Dragon

    Have you got notifications muted ? Only notifications (including games) get muted, so the iPod and Videos apps, and headphones, still get sound.
    Depending on what you've got Settings > General > Use Side Switch To set to (mute or rotation lock), then you can mute notifications by the switch on the right hand side of the iPad, or via the taskbar : double-click the home button; slide from the left; and it's the icon far left; press home again to exit the taskbar. The function that isn't on the side switch is set via the taskbar instead : http://support.apple.com/kb/HT4085

  • Windows Vista major sound issues

    On my 2 month old Unibody Macbook, I'm experiencing severe sound issues with bootcamp 2.1 in windows vista. While playing games such as Halo 2 or Fallout 3, which the macbook graphically handles exceptionally well for a laptop, the sound crackles and often disappears! To get the sound back I have to reboot my macbook. Help, this is extremely annoying, and apple won't do a thing about it!!! Please help!

    try what I posted here and report back
    http://discussions.apple.com/thread.jspa?messageID=9071165&#9071165

  • Sound issue in Windows XP on Macbook pro

    So here is my issue. Ive tried poking around the computer to see if I can find something but my problem is this...
    The sound coming out of the lap top does not stop coming out. I have 2 Bose external laptop speakers set up and even with those speakers, the sound still comes out of the laptop. In addition to that, when Im trying to be quiet, I put my headphones in. Yet sound still comes out of the laptop speakers. I have no way to adjust it and I havent found a solution because simply pressing the sound keys does not work.
    If that makes no sense let me know.

    I'm running into a similar issue myself. I just upgraded to Leopard, and almost immediately installed Windows XP on a Boot Camp partition. I'm getting sound out of the mac speaker, but I haven't had any luck getting the sound to come out of the rear speaker jack - which normally works fine in OS X.
    Unlike you, I can use the sound controls on the mac keyboard, and if you haven't tried this already, launch windows XP, then insert the Leopard install CD. There is a windows partition on it which contains Boot Camp drivers for Windows. This will install some hardware "bridges" which will enable certain functionality on the mac keyboard, e.g. Sound control, as well as a few other things.
    I did this, and I'm at the point where I can't get the sound to go where I want it. That sound control panel in Windows is junk, and has a least a dozen sliders that do squat to solve any real problems. I mean, how many sound controls do you need!!!

  • HP Pavillion G7 series laptop Windows 7 Home premium 64 bit

    I have an HP  Pavillion G7 series laptop, On trying to install latest version of Skype, Skype downloads but won't install. Error message "internal error has occured"  code 1603.  My local comp engineer investigated and determined that the Sonix integral camera was not compatible with the latest Skype version. To get Skype to install, the integral camera was disabled which allowed Skype to install but i have to use an external camera. Not always convenient. Does anyone know if a fix for this problem is being addressed ??
    Many thanks,
    Cybee

    I would suggest going back into the recovery manager and doing a system restore (not recovery) back to a previous point where you know it worked.  The other option would be to do a recovery but you will lose all data that is not backed up.
    Restore:
    http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01835735&lc=en&cc=us&dlc=en
    Recovery:
    http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01867418&lc=en&cc=us&dlc=en
    I am an HP employee.
    Please post rather than sending a Private Message. It's good for the community and I might not be able to get back quickly.- Thank you.
    Please click the White Kudos star on the left to say thanks.
    Please mark Accept As Solution if this resolves your issue.

  • HP Pavillion dv5-1235dx laptop - No audio from built in speakers of recently purchased laptop

    I purchased my laptop (HP Pavillion dv5-1235dx laptop) from best buy on Saturday, May 9th, less then a week ago. Yesterday the audio/sound stopped working completely - from the built-in speakers.  I can hear ALL sound just fine from headphones.  Only the internal speakers aren't funcioning.  I did online troubleshooting, and also chatted with a technician, and I still have the same problem.  I ran all updates, the status on the sound driver says it is funcioning properly.  Even the little fluctuating green bars (on the volume control) SHOW that sound is coming out, but still unless I have headphones in, no sound comes out.  The HP monitering software DID pop up and say there were critical errors and the computer needed to be updated yesterday, but I don't know if that was related because once I did all the updates, the audio still had the same problem.  Please help me out.
    Thanks,
    Kalli

    If it is less then a week, just return it to bestbuy. You may have a loose connection in speaker jack.
    Have you try to use recovery DVD? try to install it to the factory setting.
    If it does not work, definitely you have a hardware problem.
    Pavilion DV2922TX, XP-SP3 32bit, Intel T5750 2.0Ghz, Nvidia Geforce 8400M GS with 128MB, 4GB 667 DDR2, 250GB HDD

Maybe you are looking for

  • I have disabled my pop up blocker but it still does not open pop up windows on certain sites.

    I work on Windows XP, Firefox 3.6.8, webbook, 3Connect broadband dongle. I have disabled my pop up blocker in options, but I still can not access, among others, ebay's 'add tracking number' window, the image library on www.demandstudios.com and the l

  • Importing user profiles from Exchange server 2010

    Recently our org moved from exchange 2003 to exchange 2010. after the move we suddenly have all the distribution list not available in user profiles. groups like #HR_ALL and #RESEARCH_ALL are not found in our user profile store anymore after latest c

  • Deployment Descriptor is malformed

              WLS 6.1, Win 2K Prof.           I have deployed my JSP & EJBs in an EAR file. When I start the JSP I get the following           errors in the WLS console, though it doesn't appear, at present to have an adverse           effect. A pointer

  • Photoshop keeps stopping after startup.

    Since installing Creative Cloud for Lightroom and Photoshop I foind that photoshop now will only run for a few seconds before quiting. If I open a file in Photoshop throught the "Edit In" command from lightroom then It almost immediately asks me if I

  • Innaugural demo: Is there any difference between 'GO' and 'Search'?

    I'm still poking around in this demo, and it looks to me like a) The Go and Search buttons do EXACTLY the same thing b) There are some old objects in there that are no longer used (OLD_SEARCH). I see two sets of code to generate results for pg. 2, bu