Intermittent Sound Loss (SFX & Audio)

Hi gang, I have an odd problem with intermittent sound loss (button SFX + audio) on my brand new ATV2 (HDMI to HDMI on a 2 year old Phillips 42"). The picture is great, but the audio only works about 50% of the time. (?!) I'm totally stumped. I did some troubleshooting. Restart, Reset, Restore. No dice. I swapped the cable and tried different HDMI ports — to no avail. I also spent an hour on the phone with an Apple tech. We did everything again and we turned off Dolby, etc. No dice. He suggested I bring the device into the Apple store, and they swapped it out for me. But I'm having the same problem with the new device — and AGAIN only 50% of the time. It seems totally arbitrary. Very frustrating. Any ideas would be appreciated.

Did you try restarting your TV, the problem may be there.
(I have a tv that starts to drop audio occasionally, although a restart of the tv will resolve the matter it does return perhaps weeks/months later)

Similar Messages

Intermittent Sound Dropping When Streaming Audio

I've just step up my new Apple TV and streaming from my shared iTunes library over wireless network is great.. However when I stream using airplay on my iPad 3 or iPhone 5 the sound drops intermittently, as if the signal wasn't getting through, if you know what I mean! sometimes drops altogether and airplay on the device seems to switch off.
I can't see any settings that I could change even if I wanted to (or knew what to!) and it seems strange that it works fine from the pc but not from the other Apple products.
The wireless signal is obviously ok, or could it be the wireless bits n the iPhone/Pad are not as good as in the pc? Clutching at straws a bit here, hope someone out there can help.
Thanks.

Thanks for posting this because I too have the Pioneer VSX-1019AH and have just noticed this problem. I rarely listen to my iphone (ipod) through my receiver and this problem never occured before until yesterday.
I am experiencing a sound loss at random times, and it takes restarting the receiver, or disconnecting then reconnecting the iphone cable to get the sound back again, only for it to go off again in a few moments time.
Whilst the sound is off, both the iphone and receiver are continuing to play music because you can see the title of the tracks change on both devices. So where the fault lies is hard to tell but I'd say it's with the ios4.
I don't know whether Apple will provide any support regarding this problem but I do notice the receiver has been endorsed "made for ipod" which means it meets Apple performance standards.

Intermittent Loss of Audio

I rented Micheal Clayton on HD a couple of days ago (my second HD rental), noticed that the movie playback had intermittent loss of audio whether I set it to DD5.1 or not it made no difference.
The audio loss don't seem to happen at the same scene everytime I rewind and play it back all over again. It seems to happen at random scenes during the movie playback and several times there was no audio for nearly 5 to 10 seconds before it reappears and when I rewind and playback the same scene again, the audio seems to be alright for most parts?
I am wondering if any other users have had similar audio issues with rented movies from iTunes?
This is like my first rental movie which had issues with audio, the previous 3 or 4 rentals did not have any audio nor video issues. It's not my ATV unit either because movies and music videos which I already own, playback on it just fine in DD5.1 via Optical and HDMI. So the issue was just with that one movie which I rented then.
I am wondering how could one demand for a refund from Apple when faced with such problems or issues after the rented movie dissappears from your ATV 24 hours later??
Now I am feeling cautious to rent another movie, what if I have another issue with which ruins the movie experience?
I think I will stick with my PS3 and Blu-Ray for now.

Not sure but I thought I read in another issue that if you connect a TB cable from your Mini into the TB port on the display and the audio/video is OK then that would mean the built-in cable is bad. I have never tried this so not sure it would work. Hate to buy a TB cable just to test because of cost. The other way would be to take to Apple store and have them check the cable. It contains miniture IC boards and one could be bad.

Intermittant sound on HP Pavilion PC

Can someone please help us?
We have a HP Pavilion PC running Vista, our problem is that when the sound is turned on there is intermittant sound coming from both channels, and you are unable to understand anything coming out of the speakers. But if you put a headphone jack in, there is only sound coming from the right channel.
I have uninstalled the audio driver and reinstalled to hopefully correct the problem, but it continues to stay the same. We have run out of ideas and hope someone can help.

Hi,
Try the following.
Download the IDT Audio installer on the link below and save it to your Downloads folder.
http://ftp.hp.com/pub/softpaq/sp59501-60000/sp59542.exe
When done, open windows Control Panel, open Device Manager and open up Sound, Video and Game Controllers. Right click the IDT device and select Uninstall - you should also get a prompt to remove the current driver, tick the box to allow this and then proceed with the uninstall.
When complete, shut down the notebook, unplug the AC Adapter and then remove the battery. Hold down the Power button for 30 seconds. Re-insert the battery and plug in the AC Adapter.
Tap away at the esc key as you start the notebook to launch the Start-up Menu and then select f10 to enter the bios menu. Press f5 to load the defaults ( this is sometimes f9, but the menu at the bottom will show the correct key ), use the arrow keys to select 'Yes' and hit enter. Press f10 to save the setting and again use the arrow keys to select 'Yes' and hit enter.
Let Windows fully load - it will automatically load an audio driver, but just let this complete. Then open your Downloads folder, right click on the IDT installer and select 'Run as Administrator' to start the installation. When this has completed, right click the speaker icon in the Taskbar and select Playback Devices. Left click 'Speakers and Headphones' once to highlight it and then click the Set Default button - check if you now have audio.
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

Loss of audio panning effects with timeline audio of Sync type "Stream"

I have a Flash animation which is loaded into a parent master Flash file. In the animation, there is voice audio embedded in the timeline which is synced with a character animation. The Sync type of the audio is set to Stream, which is essential for the mouth movements to match the audio. When I try to pan the voice audio so that it comes only out of the right speaker, it sounds fine during preview playback, but after publishing, all of the panning effects are lost. If I change the Sync type to "Event" or "Start", the panning effects work fine, but the audio is terribly out of sync with the animation.
The source audio is a mono audio file. Not sure if that has anything to do with it. I've tried changing the publish settings for both the parent and the child animation Flash files to be Speech, Mp3 mono, Mp3 Stereo and just about every other option, with no desirable results. I have also tried publishing and running the animation without loading it through the parent file, also no results.
Is there some kind of rule in Flash about Stream versus Event audio and panning? Do I need to use a stereo audio source file? I don't currently have access to the original audio files, but I can get them. Are all Stream type sounds automatically converted to mono at runtime or something??
Thank you thank you thank you

According to the Adobe installation information the trial version of Premiere Elements 11 is fully functional and the watermark is only present until a licence code is purchased.
I have edited AVI footage from a camcorder using the program with no problems (and no loss of audio sync) and the watermark is also present with this.
The odd placement of audio and video was caused by my not dragging the clip carefully enough.
What is odd is that the clip plays completely normally using WIndows Media Player and VLC Media player so I would expect Premiere Elements to be able to handle it without problems.
I think that there is some sort of bug in Premiere Elements' handling of mpe4 files (both in versions 10 and 11) rather than there being anything wrong with my computer.
Is there some way of communicating this directly to the Adobe programers ?
I enclose screenshots of the project settings:

Intermittent sound problems (circle with slash) since 10.9.1 upgrade.

My 27" iMac (mid-2011, 2.7 i5, 16g RAM) has had intermittent sound problems (circle with slash) since I upgraded to 10.9.1. I've reset the PRAM, used Disk Utility on the file permissions, tried Audio Midi, and sound prefs steadfastly refuses to use the internal speakers.

Did you install the latest driver set for the device? there is a new release on motu.com for mavericks.
rachel

Rewinding or FFWDing Media Center TV sometimes results in TV Window blacking and loss of audio

I recently reinstalled Win 7 SP 1 Home Premium 32 bit and I'm still experiencing the subject problem that prompted the reinstall.
I'll be watching live TV with no problems and then decide to rewind a bit by clicking the rewind button a few times (the more times I click and the more rapidly, the more likely this problem seems to occurr) and the Media Center TV screen/window will sometimes
'smoothly' go black also sometimes with a loss of audio. The timer shows TV playback is still occurring and then after a while - 5 ~20 seconds, the picture and then eventually, the sound, return. This occurs both in Windowed or Full Screen TV viewing.
My system details are:
Intel DG45ID Motherboard with E8500 Core2 Duo 3.16 GHz CPU and using onboard G45 Graphics
4 GB (2 x 2GB) of compatible Corsair DDR2 RAM
Compro Technology E900F TV Card (receiving just DVB-T UK Freeview broadcasts)
4 x 1 TB Samsung HDDs configured in a 2 TB RAID 0+1 Array using native board functionality
All the latest drivers are installed correctly - chipset, TV card, Grahics, Audio and Intel RST as well as ME software etc. I've also tested with both Playready installed and not installed - with no difference.
Does anyone know whats causing this or workarounds to cure it please?

Hello Niki,
Many thanks for your reply and that very interesting link. I've reviewed that workaround more deeply and it seems to stop the screen blacking/loss of audio problem but according to one of the threads that it originated from here:
http://answers.microsoft.com/en-us/windows/forum/windows_other-tv/losing-soundpicture-when-rewinding-live-tv-in/6e0f575a-4bed-4248-9cac-a6392b7b6d16 , the 'fix' also disables MHEG 5 Functionality, which for me, as a UK user of the BBC Red Button and other
interactive services, is NOT acceptable. The BBC have recently ceased their Ceefax (Teletext) service which has been superceded by the red button MHEG-5 based service so bug free MHEG-5 is our only option.
I see that the other thread I linked to has had no official comment from Microsoft - as a Moderator here (clearly someone with connections/influence at Microsoft to at least some degree) will you kindly pass this up the chain to be fully and properly addressed
please Niki? Otherwise maybe someone who is responsible for this field at Microsoft would care to comment here (and over on that other Microsoft thread that's been awaiting their input for some time)??
I realise that
MHEG 5 , despite being an international standard, isn't utilised all around the world (notably not in the USA) so I hope this doesn't affect Microsofts prioritisation of providing a proper fix to this issue.

Intermittent sound using dd live pack, spdif to home theater spdif.

. when using dd li've pack to listen to audio through home theater, connecting spdif out on elite pro module to spdif in, i have only intermittent sound. there is no common timing, just sound on and off. as the sound comes on, on my computer i have the dolby digital li've bitstream out "bug" that comes on in the lower left hand corner of my screen, then goes away when sound off. i am listening in entertainment mode. i don't really know what else to say. does anyone else have this [email protected]

G? A lot of Audigy DDL users have reported 5. signal being lost randomly.
Mine cuts out and Dolby Digital Li've becomes plain PCM (stereo on the receiver). It only does it for a second, then 5. gets restored. Then a few seconds/minutes/hours later it happens again.
Sounds somewhat related to the X-Fi issues.... perhaps is the same thing?
heavyd wrote:
when using dd li've pack to listen to audio through home theater, connecting spdif out on elite pro module to spdif in, i have only intermittent sound. there is no common timing, just sound on and off. as the sound comes on, on my computer i have the dolby digital li've bitstream out "bug" that comes on in the lower left hand corner of my screen, then goes away when sound off. i am listening in entertainment mode. i don't really know what else to say. does anyone else have this problem?

No sound coming from Audio Loops

Hi,
I was in a studio session with an artist today and upon reopening Logic Pro X after a lunch break, the audio loops from the loop library are not playing. I've created a new project and dragged the loops into new tracks and they still won't play. It shows there are levels but no sound is coming out. I tried the same thing with midi loop files and those will play fine with perfect sound. I have double checked my speaker system and restarted Logic and the Computer multiple times but it still won't play any sound for any audio loops. Can anyone help me with finding a solution for this?
Thanks!

I had no idea what that was until I searched for it. But I found it and made sure it was set for "Built-in Input" for "Default Input" under System Settings, and also "Built-in Input" by Properties For... then down under Audio Input it has "Line In" as the Source... everything looks fine but I'm still not hearing anything. I even tried adding my mixer as a MIDI device(???), although I've no clue what I'm doing in that area...

Ipod to stereo sound loss

I've been searching a bit for this, but has anyone noticed some serious sound loss when connecting ipod to stereo or television and trying to play music? I've used it for TV and I didn't notice any major loss, but for music (using the standard headphone jack to white and red plug), it *****! If I turn the stereo up full ball it still lacks any punch (on a cd it would deafen me at this level). I want to buy a car stereo with an aux imput, but don't want to if it's not going to be loud. The ipod is new, so just want to know if this is normal?

I have used all of my 4 iPods as the main source for music connected to my living room stereo for years throug a docking station. (Not through the headphone output.)For my stereo i think the "latin" equalizer setting is closest to CD sound, but that varies. The sound is very close to CD sound and I do not lack any punch. I am using the same set up in the car and no problems there either. With the latest docing station the volume on the iPod has to be on full, but it automatically goes to full volume when docking.
By the way, I am using it with to stereos, One Denon and one Bose.
Regards,
Trond

Apple gives response on sound loss in iMovie '11

I phoned up Apple 'Care' about the reported sound loss/sound syncing when exporting clips.
Apple are not aware of any problems with the sound on the latest iMovie update. He suggested I look at my settings, and "Search on Google".
Great help.

-

When converting from a .wav to a .mov is there a loss of audio quality when using QuickTime?

When converting from a .wav to a .mov is there a loss of audio quality when using QuickTime?

When converting from a .wav to a .mov is there a loss of audio quality when using QuickTime?
That would depend on your work flow. MOV is the generic QuickTime file container and is not related to any particular data compression format. If you perform a simple "Save" or "Save As..." action that merely copies the data in the WAV file to an MOV file, then the data remains unchanged and maintains its original quality. If, on the other hand, your transcode/re-compress the original data to a different compression format, then there is always the potential for some loss in quality. Depending on the codec and/or settings, the potential loss could be inaudible to severe.

All of the movies that we watch on I tunes have intermittent interruptions to the audio. It's like a one second blank every 20 seconds and we miss what is being said. This is independent of which movie is playing. Our Apple TV is hardwired.

All of the movies that we watch on I tunes have intermittent interruptions to the audio. It's like a one second blank every 20 seconds and we miss what is being said. This is independent of which movie is playing. We are on Shaw and have purchased their best modem and registered for the higher speed option. Our Apple TV receiver is hard wired back to our network hub and the hub is working correctly. There is no problem with the video. What could be causing this problem?

I own the movies and I want them to stay in my iTunes library basically forever.
But in both cases the file name no longer shows in the movie list, so I don't know how to re-download it from the Cloud.
iTunes prefs > Store > Show iTunes in the Cloud purchases.
This will show all your iTunes purchases in your library with a cloud icon down arrow. Click the icon to redownload or click on Play to stream without downloading.
Also see this , -> Download past purchases
and techncially, you don't "own" the movie, You simply have a license to use it.
Yet the first thing iTunes does when you hit the delete key is tell you that it will remove the movie forever from all devices and the library.
Actually, no it does not tell you that.
FYI: You should keep copies of all yoru iTnue spurahses as the labels/movie studios/copyright owners can pull their product at anytime and it won't be available to redownload.
Suggestions here -> http://www.apple.com/feedback/

How can I put another image without its associated sound on an audio (without its image) ?

IMovie 11 : how can I put one image without its associated sound on an audio (without its image) ? thanks

Hi
As iMovie doesn't orient after Time - but only after Video/Photo clips is this not so easy to do.
I use black photos as Dummy clips - and put them into a new project first
then I add the Music I want
Then I drop the Video-clip (that I realy want) ontop of the black dummy photo - Where it's supposed to be - THEN IF advanced tools are selected (in iMovie preferences) there will be a Drop-Down menu and here I can select to do a Cutaway - and select not to add the audio from it (or in wave-form just silence it out)
Yours Bengt W

No sound - no beats audio. dv7 notebook Windows 7 64 bit.

No sound - no beats audio. dv7 notebook PC-SER #2CE2012FSD, IDT High DEF Audio CODEC, Windows 7 64 bit, Product # A6X08UA#ABA. Need ASAP for school.Please help.

Hi,
Try the following.
Download the IDT Audio installer on the link below and save it to your Downloads folder.
http://ftp.hp.com/pub/softpaq/sp58001-58500/sp58226.exe
When done, open windows Control Panel, open Device Manager and open up Sound, Video and Game Controllers. Right click the IDT device and select Uninstall - you should also get a prompt to remove the current driver, tick the box to allow this and then proceed with the uninstall.
When complete, shut down the notebook, unplug the AC Adapter and then remove the battery. Hold down the Power button for 30 seconds. Re-insert the battery and plug in the AC Adapter.
Tap away at the esc key as you start the notebook to launch the Start-up Menu and then select f10 to enter the bios menu. Press f5 to load the defaults ( this is sometimes f9, but the menu at the bottom will show the correct key ), use the arrow keys to select 'Yes' and hit enter. Press f10 to save the setting and again use the arrow keys to select 'Yes' and hit enter.
Let Windows fully load - it will automatically load an audio driver, but just let this complete. Then open your Downloads folder, right click on the IDT installer and select 'Run as Administrator' to start the installation. When this has completed, right click the speaker icon in the Taskbar and select Playback Devices. Left click 'Speakers and Headphones' once to highlight it and then click the Set Default button - check if you now have audio.
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

Intermittent Sound Loss (SFX & Audio)

Similar Messages

Maybe you are looking for