Intermittent sound on boot with Pavilion dv5

Windows Vista
Product number: NM597PA#ABG
Ever since I started connecting my notebook to a second monitor with HDMI I've encountered a problem where it will only boot with audio roughly one in three times. The problem persists even when I revert to the previous setup I had, and when I run the notebook without any peripherals at all. Putting the notebook into sleep mode will also instigate the problem.
Cheers.

Hi,
Can you try uninstall the audio driver and then re-install again?
I work for HP.
Please click the white "Kudos" star to say thanks.
Please click "Accept As Solution" if you think my response helpful.

Similar Messages

Intermittent sound problems (circle with slash) since 10.9.1 upgrade.

My 27" iMac (mid-2011, 2.7 i5, 16g RAM) has had intermittent sound problems (circle with slash) since I upgraded to 10.9.1. I've reset the PRAM, used Disk Utility on the file permissions, tried Audio Midi, and sound prefs steadfastly refuses to use the internal speakers.

Did you install the latest driver set for the device? there is a new release on motu.com for mavericks.
rachel

No Sound on My HP Pavilion dv5-1334ca Entertainment Notebook PC

Product Name :
HP Pavilion dv5-1334ca Entertainment Notebook PC
Product Number:
NV101UA
Problem:
No sound when watching a video over the Internet and aswell on Itunes, also NO Sound when laptop is shuting down and re-starting. Please provide me a way of getting the sound back up and running, thank you.
Regards, L_B
This question was solved.
View Solution.

Hi,
Try the following.
Download the IDT Audio installer on the link below and save it to your Downloads folder.
http://ftp.hp.com/pub/softpaq/sp41501-42000/sp41698.exe
When done, open windows Control Panel, open Device Manager and open up Sound, Video and Game Controllers. Right click the IDT device and select Uninstall - you should also get a prompt to remove the current driver, tick the box to allow this and then proceed with the uninstall.
When complete,download and reinstall the Chipset driver on the link below.
Chipset Driver - Windows Vista.
When the reinstallation has completed, shut down the notebook, unplug the AC Adapter and then remove the battery. Hold down the Power button for 30 seconds. Re-insert the battery and plug in the AC Adapter.
Tap away at the esc key as you start the notebook to launch the Start-up Menu and then select f10 to enter the bios menu. Press f5 to load the defaults ( this is sometimes f9, but the menu at the bottom will show the correct key ), use the arrow keys to select 'Yes' and hit enter. Press f10 to save the setting and again use the arrow keys to select 'Yes' and hit enter.
Let Windows fully load - it will automatically load an audio driver, but just let this complete. Then open your Downloads folder, right click on the IDT installer and select 'Run as Administrator' to start the installation. When this has completed, right click the speaker icon in the Taskbar and select Playback Devices. Left click 'Speakers and Headphones' once to highlight it and then click the Set Default button - check if you now have audio.
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

Sound Delay Problem on Pavilion DV5 1138 NR

I have this Pavilion DV5 1138nr Entertainment Notebook PC, and I also have a 23" HP monitor (w2338h). It is also connected through HDMI. The only problem is that there is a horrible sound delay in the built in speakers. So basically, it's like when I go to shut down my computer, it cuts out the first part of the sound, and same when I start it up. Or if I just get an error message, it cuts out the first part. Is there any way to fix this problem?
Thanks
Oh and I'm running Windows XP Professional (x86). The laptop itself originally came with Windows Vista Home Premium (x64).

I have done all this myself! i need to figure this out asap cause i video dj using vdj and it used to work! i use my hdmi extended monitor a vizio tv that had videos playing on it and i would dj on my laptop! i've done this may times before! i had it setup ready to go did a few tracks and everything was working fine i left it as is and let the other dj go first and he was using his equipment! then when i turned my tv back on from the setting i had left them at didn't touch anything and the videos weren't working! so there has to be something that has just happened and i want to know what it was lol! my laptop shows that it has a monitor connected but, there is no video or sound that i had before! someone i need to figure it out by 11/18/11

Audio problem with Pavilion dv5-1240EW

Hi all!!
I'm here to find help with my audio problem.
My laptop is HP Pavilion dv5-1240EW and i had download the audio form the HP side some time ago and also get new Nvidia drivers. My problem is that i can use the 5.1 sound on my Logitech X-530 because i can set in on my audio setting. I insert the screen (sorry but i have polish version of windows 7)
As you can see i can only one option but i should have also the other like: mono, 2.1 , and 5.1. It's funny but i have the option 5.1 but it disappear. And it looks like this drivers give me only 2 option spekers and headphones and nothing more.... I don't know what to do if the drivers form the original side "crush" my audio setting.The funny thing is that the subufer is working and 4 of 5 speakers work but you know is only right and left the middle is not work. I try to reinstall drivers but it doesn't help i can't find solution to this problem and i lost many hair so if you know how to fix it It was a great relieve to me.

I get here the screen i don't know how my message get over 50,000 signs O.o. Here it is:
1) http://imageshack.us/photo/my-images/854/idt.png/
2) http://imageshack.us/photo/my-images/707/idt.png/
OMG two little pictures and "Message cannot exceed 50,000 characters. "

[solved] no sound when booting with webcam attached

Hi everybody,
hopefully this is the right section to post since I'm not quite sure if the problem is related to KDE or a general hardware thing. ;-)
Anyway, the problem that I have is that I don't have any sound at all when booting my system while my webcam, a logitech 9000 pro, is attached to the USB port.
Even when unplugging the webcam afterwards the sound does not work. I need to reboot my system first with the webcam detached and than it'll work again. I also did already manually insert the modules in /etc/rc.conf but no change. Every time it seems that the webcams audio interface will be recognized as the primary audio device.
When not having the camera plugged in and plugging it in while KDE is up, everything works like a charm.
But of course it bothers me quite big time to unplug the webcam every time after using it and rebooting the system again after I forgot to unplug it.
I also checked for other modules to be loaded automatically (compared the output of lsmod before and after plugging in the webcam) but there was no change.
So does anyone have an idea what to do in order to get the order of the audio devices right?
Thank you!...
Last edited by kurisutian (2009-11-23 19:34:10)

In your /etc/rc.d/modprobe.d/modprobe.conf try to put zero index for your audio driver, so it will load first. In my case it's this line:
options snd-hda-intel index=0

Pavilion dv5 - 1217AX with Windows 8 - multiple booting and crashing issues

I have a Pavilion dv5 - 1217AX with Windows 8 operating system. It was upgraded from Vista to windows 8 last year and it worked really very well for about 1 year. Here are the issues I am facing these days
1. When powered on - Caps lock and Num lock LEDs keep flashing twice and the sequence keeps repeating - I checked the error code on some forums and it sounded like BIOS issue so I flashed the BIOS F38 again (SP46501) but it didn't help. I also thought it could be a memory issue so I removed the memory module and cleaned the slots and fixed the modules again but no luck. I also tried running the laptop using only one module, tried both the modules one by but no changes in error code. Then I thought it could be a toy bettery issue so replaced the toy batter that fits on the motherboard but no luck. I have also tried booting up removing the laptop battery pack but no luck.
So how does it boot now? - Once powered on I keep getting Caps lock Num lock LED flashing issues every time. Then I power off using power on/off button on laptop around 15 times or more then the laptop somehow boots up. There is no fixed pattern, sometimes it boots after 15 attempts, sometimes 50 attempts.
Whats happenes after booting? - Sometimes the screen goes completely blank without any error message on the screen. Sometimes Windows 8 crashes and laptop restarts, when it restarts I never see LED flashing issues (surprising). It crashes when I am watching some videos or playing some games, so looks like ATI Radeon driver issue (driver is 8.970.100.7000 for HD 3400 display card).
Let me know if there are any suggestion to fix the botting and crashing issues faced.

Hi Expertit ,
At first sight ,seems to be a boot issiu.Did you thry this?
Booting into the Windows 8 setup, select “Repair your computer” in the bottom part of the window, then “Troubleshoot” and “Advanced options”. Here I was given a good reminder of another cool Windows 8 feature. If you have a restore point created you can go back to that working copy of the OS without losing your data.
So the first thing you will want to try is the Automatic Repair.
If that fixes your boot problem, you had it easy and go on to create a restore point for another time you are out of luck. If Windows is unable to fix your issue, read on.
Go back to the Advanced options and choose the Command Prompt. Going for the next easiest way to fix the problem, enter the following four commands into the prompt:
bootrec /fixmbr
bootrec /fixboot
bootrec /scanos
bootrec /rebuildbcd
After receiving a success confirmation. Close the CMD window and restart your PC.
If you are booted into Windows, excellent! If not, let us know , so we can try some more solutions.
2.If your video crashes , it is probably wrong Catalyst settings.Right click on screen , open Catalyst control settings , set it to high (Radeon) performance.
Expecting your next post.
<<<-------***
**Click the KUDOS star on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Problem with sound delay from mic to speakers with quickplay on HP Pavilion dv5-1145ev

I have an HP Pavilion dv5-1145 ev. When I try to use karaoke with HP's quickplay there is a significant sound delay from the microphone to the speakers. I also noticed the same delay, even when I am recording my voice with other programs such as audacity. There is a voice delay too. I have windows vista and I have tried to change the settings of the sound from control panel, without any luck. Any suggestions please?

I have an HP Presario CQ61 that I bought to record my own music in tracks and it's useless to me because I have about a second delay from the mic to my recording program and headphones. You would think that with all the brainy knowlage Bill Gates and the computer industry has someone can come up with a downloadable fix for this problem. If I knew I would have this problem before I bought the thing I wouldn't have wasted my money. If anyone finds a fix for this please let me know.

Booting problem with HP Pavilion DV5, Got 2 blinking lights.

Hi,
When I switch my laptop (Pavilion dv5) on , it doesn't boot up. Instead I am getting two lights (Caps lock, num loc) blinking.
These lights blinnk twice a second.
Can anyone suggest me the solution.
following are the actions I have already done (which did not work)
1: Replace the CMOS battery
2: Removed the RAM, Cleaned it (sometimes moisture poroblme), re-insert it.
3: Removed the hard-disk , cleaned it, and re-insert
Thanks in advance,

I had almost the same probleme, laptop was in sleep, tried to wake it up:keybord and light were on but a black screen. Then decided to turn off by holding power. When i start it back i had the cap lock and num lock blinking twice continusly. I hold the power button to shut it down then by mistake touch the ''quick play'' next to the 'mute' and everything was find.
Hope this could help.

No sound is coming from my HP pavilion dv5 laptop after automatic update

product name: HP pavilion dv5 laptop
operating system: windows vista 32 bit home primium
after automatic update no sound is coming from my laptop.internal speaker are also not working.also windows starting sound is not coming.i also installed the drivers,update sound drivers but still sound is not coming.please give me perfect solution.

Hi,
Can you post back with the full Model No. and Product No. of your dv5 series notebook - see Here for a guide on locating this information.
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

Intermittant sound on HP Pavilion PC

Can someone please help us?
We have a HP Pavilion PC running Vista, our problem is that when the sound is turned on there is intermittant sound coming from both channels, and you are unable to understand anything coming out of the speakers. But if you put a headphone jack in, there is only sound coming from the right channel.
I have uninstalled the audio driver and reinstalled to hopefully correct the problem, but it continues to stay the same. We have run out of ideas and hope someone can help.

Hi,
Try the following.
Download the IDT Audio installer on the link below and save it to your Downloads folder.
http://ftp.hp.com/pub/softpaq/sp59501-60000/sp59542.exe
When done, open windows Control Panel, open Device Manager and open up Sound, Video and Game Controllers. Right click the IDT device and select Uninstall - you should also get a prompt to remove the current driver, tick the box to allow this and then proceed with the uninstall.
When complete, shut down the notebook, unplug the AC Adapter and then remove the battery. Hold down the Power button for 30 seconds. Re-insert the battery and plug in the AC Adapter.
Tap away at the esc key as you start the notebook to launch the Start-up Menu and then select f10 to enter the bios menu. Press f5 to load the defaults ( this is sometimes f9, but the menu at the bottom will show the correct key ), use the arrow keys to select 'Yes' and hit enter. Press f10 to save the setting and again use the arrow keys to select 'Yes' and hit enter.
Let Windows fully load - it will automatically load an audio driver, but just let this complete. Then open your Downloads folder, right click on the IDT installer and select 'Run as Administrator' to start the installation. When this has completed, right click the speaker icon in the Taskbar and select Playback Devices. Left click 'Speakers and Headphones' once to highlight it and then click the Set Default button - check if you now have audio.
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

Suddenly no sound from pavilion dv5. How to get it back?

I seem to have done something that told my HP pavilion dv5 that I didn't want any sound. What now?

Hi,
The easiest way to solve this may be to run Windows System Restore. If you have Norton Internet Security installed, you will need to disable Nortons Tamper Protection as shown in Step 2, on the link below.
http://us.norton.com/support/kb/web_view.jsp?wv_type=public_web&docurl=20091112171719EN&ln=en_US
Once you've done this, shut down the notebook. Windows System Restore is usaully best run in Safe Mode. Tap away at f8 as you start the notebook to enter Windows Recovery Console. Use the arrow keys to select Safe Mode and hit enter. When this has loaded, from the Start Menu, click All Programs, click Accessories, click System Tools and launch System Restore. Pick a restore point at least 24 hours before the Audio issue and then proceed with the restore process. When complete, Windows will reboot as normal.
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

PC Will Not Boot With Sound Blaster Live Va

My PC won't boot with the SBLV card but when i put the SB Vibra 28 card back in it will boot. The card dosen't look burnt out anywhere,the sound card could have **bleep** itself,any ideas.also i have another problem i can't get the SB Vibra 28 drivers to work its there in the device manager but it has a conflict due to the drivers not installing. It comes up
with this error (The SBPCI interrupt has been routed incorrectly by the system audio pci
inacti've.Use automatic settings in the device manager.
Any Ideas
Cheers
Pentium 233mmx
64mb ram
win 98SE

I have the same message error.
"The SBPCI Interrupt has been routed incorrectly by the system. AudioPCI Inacti've. Use Automatic setting in the Device Manager."
I have a Compaq computer and win 98. Ever since we moved, the speakers stopped working.
I tried going thru system properties and Device manager...it shows that the device is working properly. And the Automatic setting box was already checked. I bought new speakers thinking the speakers were bad but I still get no sound. I followed all the steps for Sound Troubleshooting. I did notice when I went to control panel, multimedia, devices, audio...one of the sound cards said: driver is enabled but inacti've due to an unknown problem. But it didn't tell me how to fix the problem?
I don't know how to get the sound.
Can someone help me? I really don't know anything about the computers.
Thanks in advance.

I have a HP Pavilion DV5 1251nr that won't boot up.

I have a HP Pavilion DV5 1251nr that won't boot up. The light at the power connector comes on nothing happen

First thing to try is a hard reset. Remove the battery and power supply. Hold down the power button for 30 seconds. Wait another 30 seconds. Now plug in the power supply. Then try to start the computer. Let us know if that works. If not, we need to start thinking about hardware issues.

Recently, I can't get any sound from my game applications. Sound works fine with video, streaming, etc, but not my game applications. I've tried powering down and re-booting, but the sound does not return. Can anyone help me?

Recently, I can't get any sound from my game applications. Sound works fine with video, streaming, etc, but not my game applications. I've tried powering down and re-booting, but the sound does not return. Can anyone help me?

Have you got notifications muted ? Only notifications (including games) get muted, so the Music and Videos apps, and headphones, still get sound.
Depending on what you've got Settings > General > Use Side Switch To set to (mute or rotation lock), then you can mute notifications by the switch on the right hand side of the iPad above the volume switch, or via control centre : swipe up from the bottom edge of the screen and it's the right-most of the 5 icons in the middle of it (if the icon is white then it's 'on', tap it to turn it grey and 'off'). The function that isn't on the side switch is set via control centre instead : http://support.apple.com/kb/HT4085

Intermittent sound on boot with Pavilion dv5

Similar Messages

Maybe you are looking for