Intermittent sound+slow responding itouch

My itouch keeps loosing all sound wether im using earphones aux connection or the sound from the itouch speaker.
It will randomly decide to loose all sound and no matter how many times i reset or restore the itouch it wont correct the problem, it will just decide to start working again on its own.
When there is no sound everything seems to slow down, it takes a few seconds for it to do things especially if you go to play music, which wont play at all(not that it matters since theres no sound anyway).
I'm guessing i probably need to take it to a apple store or something?
Cheers
Toby

You indicate in your post above that you have done both RESET and a RESTORE to no avail. The answer therefore is YES to have it looked at the Apple Store. It appears to be Hardware related.
Axel F.

Similar Messages

  • My magic mouse behaves erratically with intermittent problems - slows down, right click doesn't work, disconnects for a few seconds then reconnects. Anyone suggest what I could do to fix this?

    My magic mouse behaves erratically with intermittent problems - slows down, right click doesn't work, disconnects for a few seconds then reconnects. Anyone suggest what I could do to fix this?

    I just figured out the print quality issue for my wife with her new iMac and new printer.
    She replaced both at once and she couldn't understand why her Artisan 730 was lower quality then her Epson R280 when they had the same specs.
    Turns out the newer printer had the option to connect via wifi which we used during setup.
    The driver options are completely different depending on how you connect.
    Once I connected via USB the correct options were available and the print quality was better.
    Looking at the R2400 it dies not have wifi, but while researching the problem for my wife someone esle was having an issue updating to the latest printer driver.
    If you go into the print utility from the Printer and Scanner system preference and under the general tab you should have driver 5.5.
    One user had to delete the old printer driver before Software Update loaded the newer printer driver.
    https://discussions.apple.com/message/15947486#15947486
    On my MacBook Pro (w Snow Leopard) I always had to reconnect my wifi at home when it woke up. I upgraded my router from an old Netgear to a newer N D-Link and stopped having to do that.
    I would be surprised you would have that problem with an Airport Extreme, you might check to see if there is a firmware update for it.

  • Exchange 2010 - how to troubleshoot intermittent Outlook slowness

    I'm having users report intermittent Outlook slowness 2007.  I can't repeat the issue exactly but I have seen it -- you get a message that says "Outlook is trying to retrieve data from <Exchange Server>" and it takes it a noticeable
    amount of time.  One of the difficulties in troubleshooting this is that I haven't seen it on my own machine, nor can I find the way to replicate the issue consistantly.
    We actually just upgraded from Exchange 2003 to Exchange 2010 and never had these issues in the past.   I've run a process monitor on the server (which is about 8 times better than our old Exchange 2003 server - 2 quad-core procs and 12 GB of
    RAM for about 250 mailboxes) and find nothing abnormal in terms of CPU time or network bandwidth usage (4 teamed 1 GB/s connections).  I have also monitored several of the Exchange RPC items, and Client: RPCs but Client:RPCs does not return anything
    at all (just 0 the whole time).   Are there other things I should be looking at with PerfMon?
    I'm at a point where I'm not sure where to take my troubleshooting.  Does anyone have any ideas?  The fact that I (and most other users I've asked) never experience the issue leads me to believe that it might have something to do with a
    local computer issue rather than a server issue, but I'm hearing reports from people with both Outlook 2007 and Outlook 2010.  The other somewhat common thread is that
    Outlook is NOT running in cached exchange mode, but it wasn't when we were on the 2003 server either and we did not have this issue.   Our Exchange 2010 Server is now running the new UM role, however, and we were using Cisco Unity before. 
    I have already disabled all Outlook add-ins and disabled anti-virus (client, but not Nod32 for Exchange).
    Thanks, any ideas would be appreciated.

    Forgot you're using 2010, the item counts are much more laxed, 100,000 per folder compared to 5000 in Exchange 2007. For your Outlook 2007 clients, can you confirm you're up to date on the last post hotfixes as of Feb 2011? Also I would disable caching
    of shared calendars in outlook. Also note that outlook 2010 caches all shared mailboxes by default.
    Turn off calendar caching. If you have Exchange in use then Outlook 2007 may well have the caching of people’s calendars turned on. This means that when you open a calendar you have to wait for the cache to populate, which can slow
    things down a bit sometimes. To do this:
    Go to the Tools Menu and select Account Settings
    Select your Exchange Account and press the change button
    Press the more settings button
    Select the 2nd tab (Advanced)
    Un-tick the “Download shared folders” option. Note that this will stop cached Sharepoint folders from downloading into Outlook as well.
    Press OK until all options are saved.
    Description of the Office Outlook 2007 hotfix package (Outlook-x-none.msp): February 22, 2011
    http://support.microsoft.com/kb/2475891
    Description of the Outlook 2010 hotfix package (outlook-x-none.msp): February 22, 2011
    http://support.microsoft.com/kb/2475877
    James Chong MCITP | EA | EMA; MCSE | M+, S+ Security+, Project+, ITIL msexchangetips.blogspot.com

  • Intermittent Sound Loss (SFX & Audio)

    Hi gang, I have an odd problem with intermittent sound loss (button SFX + audio) on my brand new ATV2 (HDMI to HDMI on a 2 year old Phillips 42"). The picture is great, but the audio only works about 50% of the time. (?!) I'm totally stumped. I did some troubleshooting. Restart, Reset, Restore. No dice. I swapped the cable and tried different HDMI ports — to no avail. I also spent an hour on the phone with an Apple tech. We did everything again and we turned off Dolby, etc. No dice. He suggested I bring the device into the Apple store, and they swapped it out for me. But I'm having the same problem with the new device — and AGAIN only 50% of the time. It seems totally arbitrary. Very frustrating. Any ideas would be appreciated.

    Did you try restarting your TV, the problem may be there.
    (I have a tv that starts to drop audio occasionally, although a restart of the tv will resolve the matter it does return perhaps weeks/months later)

  • Intermittant sound on HP Pavilion PC

    Can someone please help us?
    We have a HP Pavilion PC running Vista, our problem is that when the sound is turned on there is intermittant sound coming from both channels, and you are unable to understand anything coming out of the speakers.  But if you put a headphone jack in, there is only sound coming from the right channel.
    I have uninstalled the audio driver and reinstalled to hopefully correct the problem, but it continues to stay the same.  We have run out of ideas and hope someone can help.

    Hi,
    Try the following.
    Download the IDT Audio installer on the link below and save it to your Downloads folder.
    http://ftp.hp.com/pub/softpaq/sp59501-60000/sp5954​2.exe
    When done, open windows Control Panel, open Device Manager and open up Sound, Video and Game Controllers.  Right click the IDT device and select Uninstall - you should also get a prompt to remove the current driver, tick the box to allow this and then proceed with the uninstall.
    When complete, shut down the notebook, unplug the AC Adapter and then remove the battery.  Hold  down the Power button for 30 seconds.  Re-insert the battery and plug in the AC Adapter.
    Tap away at the esc key as you start the notebook to launch the Start-up Menu and then select f10 to enter the bios menu.  Press f5 to load the defaults ( this is sometimes f9, but the menu at the bottom will show the correct key ), use the arrow keys to select 'Yes' and hit enter.  Press f10 to save the setting and again use the arrow keys to select 'Yes' and hit enter.
    Let Windows fully load - it will automatically load an audio driver, but just let this complete.  Then open your Downloads folder, right click on the IDT installer and select 'Run as Administrator' to start the installation.  When this has completed, right click the speaker icon in the Taskbar and select Playback Devices.  Left click 'Speakers and Headphones' once to highlight it and then click the Set Default button - check if you now have audio.
    Regards,
    DP-K
    ****Click the White thumb to say thanks****
    ****Please mark Accept As Solution if it solves your problem****
    ****I don't work for HP****
    Microsoft MVP - Windows Experience

  • SLOW RESPONDING IN TRANSACTIONS ( ADD , DELTES )

    HI ALLdoes anybody notice slow responding when u come to delete mesg or contact or ven to add name or just generally to do any transaction in N900or its just my device thx

    Hello,
    You should always keep up to date with Firefox:
    https://www.mozilla.org/security/known-vulnerabilities/firefox/
    Update by going to Help > About Firefox, or downloading a new copy at:
    * https://www.mozilla.org/en-US/firefox/new/
    * (all localizations) https://www.mozilla.org/en-US/firefox/all/
    After updating, if the issue comes up again, you can either disable OMTC in the Firefox configuration, or disable Hardware Acceleration. You might need to restart Firefox in order for this to take effect, so save all work first (e.g., mail you are composing, online documents you're editing, etc.).
    '''Disabling OMTC:'''
    # In the Location bar, type '''about:config''' and press '''Enter'''. The about:config "This might void your warranty!" warning page may appear.
    # Click I'll be careful, I promise! to continue to the about:config page.
    # Search for '''layers.offmainthreadcomposition.enabled''', and double click on the row or right click and select '''Toggle''' so that the Value reads '''False'''
    '''Disabling Hardware Acceleration:'''
    #Open Firefox ''Options'' window (''Preferences'' on Mac or Linux) as follows:
    # Click the menu button [[Image:New Fx Menu]] and select ''Options''
    # In the Firefox Options (or Preferences) window, click the ''Advanced'' tab, then select ''General''.
    # In the settings list, you should find the ''Use hardware acceleration when available'' checkbox. Uncheck this checkbox.
    # Now, restart Firefox and see if the problems persist.
    Additionally, please check for updates for your graphics driver by following the steps mentioned in the following Knowledge base articles:
    * [[Troubleshoot extensions, themes and hardware acceleration issues to solve common Firefox problems]]
    * [[Upgrade your graphics drivers to use hardware acceleration and WebGL]]

  • Elements 11 slow responding

    Lately, the commands in Editor have been slow responding; today in Perfect Portrait, the Add Blur command wouldn't work at all. Any suggestions?

    First go to the editor's preferences>general and click this button and restart the editor:

  • After most recent update, Firefox keep hanging intermittently with "Not Responding".

    After the most recent update, my Firefox browser begins to hang intermittently with "Not Responding". I have checked the extensions and plug-in like Java, all of them are the latest updated ones. Everytime I open a new site or click on links to load another page, it happens. Every single time.

    '''is there a solution ''(temporary OR permanent)'' for this problem yet?'''
    i tried '''EVERY possible alternative'''; even when opened in ''''''safe mode'''''' or when installed for the first time w| '''NO addons or ANYthing else''' but the '''original default settings''', still does the same thing.
    mozilla people?? really?? no answer|feedback|suggestions, anything at all from u guys??
    if it isnt a version (browser, OS, addons, etc) issue, what is it that separates us from the users not having the problem?
    this is is very frustrating; h|e it's even more frustrating when there is no response from tech support. is it because there havent been enough people who have reported this same issue so there can be some interest & find a fix; OR is it that u dont know; OR that there is not & will not be any fix?
    we cant continue being users if we cannot use it. it's really my favorite browser, but if it doesn't work & u guys dont have a fix for it, then users w| this same problem wont have any other option but to switch to a different browser permanently.
    really mozilla??? nothing? a reply would be very nice...

  • Home button intermittently doesn't respond

    Home button intermittently doesn't respond.  At times it takes 20+ depressions to get it to respond.  Have tried a reset on a number of times but like the home button it works sometimes and not other times.

    Calibrate Home button
    http://snapguide.com/guides/calibrate-your-home-button/?_exp=04&utm_expid=699459 63-32

  • Intermittent sound & voice problems

    I have been having Intermittent sound & voice problems
    During the last week when making receiving the voice and sound from the speaker is distorted on both ends of the conversation
    I have to restart the mobile and it works fine for a day or so then starts again
    I reset the phone to factory setting and it seems to have no effect
    Has anyone else had these problems?

    http://www.sonymobile.com/global-en/support/contact-us/
    Update Service (SUS)
    PC Companion (PCC)
    Bridge (for Mac)
    Alternatives on How to backup Xperias
    http://talk.sonymobile.com/thread/36355
    "I'd rather be hated for who I am, than loved for who I am not." Kurt Cobain (1967-1994)

  • Intermittant sound on iPad

    Ihaving intermittant sound on iPad. I have done numerous soft &hard resets, checked all settings (nothing to do with side switch) sound present with earphones and works when checking ring tone but when playing music keeps cutting out & slide volume bar disappears also??  It affects the keyboard clicks as well.

    Looks like an internal fault with the auto card. I would suggest taking your iPad to a local Apple store for further diagnostics.

  • Intermittent sound problems (circle with slash) since 10.9.1 upgrade.

    My 27" iMac (mid-2011, 2.7 i5, 16g RAM) has had intermittent sound problems (circle with slash) since I upgraded to 10.9.1.  I've reset the PRAM, used Disk Utility on the file permissions, tried Audio Midi, and sound prefs steadfastly refuses to use the internal speakers.

    Did you install the latest driver set for the device?  there is a new release on motu.com for mavericks.
    rachel

  • Intermittent sound & phone freezing

    Today i have noticed my iphone 4 has intermittent sound. The ringer is on, but when someone calls it doesn't always ring, and has also frozen too. The keyboard clicks don't always work, nor do the text tones.  Vibrate still seems to be working ok.
    The only thing I have changed in the last 24 hours is I updated my iPhone 4 with the new iOS 5.0.1 as it asked me to yesterday.
    Is anyone else having the same problem or had it before?

    Welcome to the Apple discussions.
    Have you run the Apple hardware test? If you have either of the TechTool programs they can do the same testing. Find the original OS X discs that came with the system, and one should say in small print on the label 'AHT Version x.x'. Insert it and reboot holding the option key down, choose the Apple hardware test, click the arrow to the right, follow directions, and choose the extended test. Does it identify any issues?

  • AirPlay Mirroring from Mac to Apple TV intermittent sound drop-off

    I can't stream iTunes or Spotify to my Apple TV without getting intermittent sound drop-out (say every 30 seconds) when I use AirPlay mirroring through my Mac. This odd thing is streaming through my iPad or IPhone to Apple TV is perfectly fine; so is using my Mac to stream to my Sonos speakers. I can even stream iTunes pefectly fine through only the Apple TV alone - so it's nothing to do with my broadband connection
    I have today performed upgrades to the Apple TV and my Airport Express firmware but the problem persists. Anyone else experiencing this or found a solution?

    Hi, same here for me. Using AirPlay for streaming music from my Mac Mini (iTunes latest version) to my ATV2 (software latest version) has intermittent drop-outs (about every 10 to 15 sec for 5 to 10 sec). At the same time streaming to my Airport Express station in the kitchen works fine. Using the VOX player streaming from the Mac to the ATV works fine, only that I can only stream to one destination. Tried streaming from iTunes to ATV only, the problem remains. Streaming video - even HD - works fine. Using the ATV to select music from my Mac's iTunes library works fine, too. Still I want to stream from my iTunes on the Mac to several destiations including the ATV. Seems to me to be a problem of iTunes. I think the effect appeared after an update of iTunes or OSX, because it had worked fine before, already.

  • Slow respond and lag while playing game

    Slow respond and lag while playing game, some time will also auto drop out to main menu page, the worse case will hang up. Compare to iPhone 2G and iPhone 3G(using the same version SW and playing the same game), my iPhone 3G will only having these problem, it is surprising why iPhone 2G speed is more faster and smoothly than iPhone 3G? Did apple can release new update version SW to solve this issue, or apple can adding selection in Setting application to allow user to turn off all un-applicable application to speed up iPhone 3G? Thanks and looking for respond!

    I know I am not addressing Apple here, I would like to do so, but I don't know how to reach them. I just want to share my experiance and would like to know did this is because of my 3G iPhone problem, or all 3G iPhone will having the same phenomena like me? I had try to reset the phone, but it is not work. But I found a way to increasing the speed, it is switch to Airplane Mode. But if switch iPhone to Airplane Mode then only able to speeding up, then the iPhone will became an Ipod Touch and not anymore an iPhone again.

Maybe you are looking for

  • How to create a formula to get the month name based on userresponse

    Hi, I have created a report using E-Fashion - Actually i need  a report like  -  For ex i need 4 months data from 12 months My report should display the 4 months data along with starting & end month data in the next 2 columns I have used the prompt t

  • Backup: Restoring Purchased Music to another Mac

    How can I use the "pre-defined" Backup Plan "Purchased Music and Videos" to do the following: 1) Backup to CD/DVDs 2) Restore to another Mac in a separate folder so that items can later be dragged into the destination Mac's iTunes Library I have trie

  • Page hijacks my home page after DSL modem interrupts

    I seem to be having frequent DSL modem interruptions (5-10x/wk) from my provider, a local company in my area. Sometimes these interruptions are severe enough for a page to come up on Safari when the DSL connection is restored. The page is from SBC (p

  • PolicyEvaluationException

    Hi, I'm currently working on a project which requires Custom Conditions, which you can plug in, in AM (version 7). Recently we made a Custom Condition and noticed that it was only consulted one time, at login time. After that, the Policy Decisions we

  • Record mode 1 unknown

    Hi Experts, I am loding to the data to ODS,When i am loding data to ODS It's Showing below given error Record mode 1 unknown data record , activation failed,Please give him to suggestion so that i am go throw that your suggetion please help me. Regar