Intermittent sound & voice problems

I have been having Intermittent sound & voice problems
During the last week when making receiving the voice and sound from the speaker is distorted on both ends of the conversation
I have to restart the mobile and it works fine for a day or so then starts again
I reset the phone to factory setting and it seems to have no effect
Has anyone else had these problems?

http://www.sonymobile.com/global-en/support/contact-us/
Update Service (SUS)
PC Companion (PCC)
Bridge (for Mac)
Alternatives on How to backup Xperias
http://talk.sonymobile.com/thread/36355
"I'd rather be hated for who I am, than loved for who I am not." Kurt Cobain (1967-1994)

Similar Messages

  • Intermittent sound problems (circle with slash) since 10.9.1 upgrade.

    My 27" iMac (mid-2011, 2.7 i5, 16g RAM) has had intermittent sound problems (circle with slash) since I upgraded to 10.9.1.  I've reset the PRAM, used Disk Utility on the file permissions, tried Audio Midi, and sound prefs steadfastly refuses to use the internal speakers.

    Did you install the latest driver set for the device?  there is a new release on motu.com for mavericks.
    rachel

  • Intermittent Sound Loss (SFX & Audio)

    Hi gang, I have an odd problem with intermittent sound loss (button SFX + audio) on my brand new ATV2 (HDMI to HDMI on a 2 year old Phillips 42"). The picture is great, but the audio only works about 50% of the time. (?!) I'm totally stumped. I did some troubleshooting. Restart, Reset, Restore. No dice. I swapped the cable and tried different HDMI ports — to no avail. I also spent an hour on the phone with an Apple tech. We did everything again and we turned off Dolby, etc. No dice. He suggested I bring the device into the Apple store, and they swapped it out for me. But I'm having the same problem with the new device — and AGAIN only 50% of the time. It seems totally arbitrary. Very frustrating. Any ideas would be appreciated.

    Did you try restarting your TV, the problem may be there.
    (I have a tv that starts to drop audio occasionally, although a restart of the tv will resolve the matter it does return perhaps weeks/months later)

  • Intermittant sound on HP Pavilion PC

    Can someone please help us?
    We have a HP Pavilion PC running Vista, our problem is that when the sound is turned on there is intermittant sound coming from both channels, and you are unable to understand anything coming out of the speakers.  But if you put a headphone jack in, there is only sound coming from the right channel.
    I have uninstalled the audio driver and reinstalled to hopefully correct the problem, but it continues to stay the same.  We have run out of ideas and hope someone can help.

    Hi,
    Try the following.
    Download the IDT Audio installer on the link below and save it to your Downloads folder.
    http://ftp.hp.com/pub/softpaq/sp59501-60000/sp5954​2.exe
    When done, open windows Control Panel, open Device Manager and open up Sound, Video and Game Controllers.  Right click the IDT device and select Uninstall - you should also get a prompt to remove the current driver, tick the box to allow this and then proceed with the uninstall.
    When complete, shut down the notebook, unplug the AC Adapter and then remove the battery.  Hold  down the Power button for 30 seconds.  Re-insert the battery and plug in the AC Adapter.
    Tap away at the esc key as you start the notebook to launch the Start-up Menu and then select f10 to enter the bios menu.  Press f5 to load the defaults ( this is sometimes f9, but the menu at the bottom will show the correct key ), use the arrow keys to select 'Yes' and hit enter.  Press f10 to save the setting and again use the arrow keys to select 'Yes' and hit enter.
    Let Windows fully load - it will automatically load an audio driver, but just let this complete.  Then open your Downloads folder, right click on the IDT installer and select 'Run as Administrator' to start the installation.  When this has completed, right click the speaker icon in the Taskbar and select Playback Devices.  Left click 'Speakers and Headphones' once to highlight it and then click the Set Default button - check if you now have audio.
    Regards,
    DP-K
    ****Click the White thumb to say thanks****
    ****Please mark Accept As Solution if it solves your problem****
    ****I don't work for HP****
    Microsoft MVP - Windows Experience

  • Audigy 2 sound card problems

    I am hoping that someone out there can help me in a crucial situation.
    I am using an Audigy 2 sound card with creative 5. speakers.
    I also use Adobe Audition to edit, record sessions for my voice-over jobs.
    Recently, I attempted to hook up a web cam so that I could see my grand daughter on the west coast.
    After hooking up the web cam, I noticed my home studio environment changed drastically. I began having trouble with recording using my microphone through my Macki mixer. I began hearing a continuous hiss that I had never experienced before.
    In fact after uninstalling the web cam, and restarting my computer, I got that horrible blue screen on my computer indicating the world was about to end! Smile
    Long story short, I was able to finally get my computer back up, but I continue to experience problems recording "clean' audio".
    Three things, after reinstalling Creative from disc several times and restarting my computer I receive a window stating Creative Media Source Detector.....Unable to load needed components....Please reinstall the application"
    Also, when trying to test my sound hardware I get a message stating...Direct play voice setup..."an error occurred during direct play voice setup....error code 0x80004005
    Last but not least I cannot access the "Creative diagnostic feature on my computer. I only get a small window for this feature that will not open up fully and allow me to run a diagnostic test!
    I know this is a lot to absorb, but I cannot get anyone from Creative to address my problems because I am out of warranty and therefore not getting any love from this company.
    Need your advice and or guidance on this.
    Please respond when time allows.
    Vopro

    Re: Audigy 2 sound card problems? use add/remove programs and remove all creative software and drivers, then do the same for your web cam and unplug it
    restart your pc
    download and install [url="http://downloads.guru3d.com/Guru3D---Driver-Sweeper-%28Setup%29-download-655.html" rel="nofollow">driver sweeper[/url] and use it to clean up any left over creative bits and bobs and restart your pc when it asks you to
    now download and install the [url="http://support.creative.com/Products/product_list.aspx?catID=&CatName=Sound+Blaster" rel="nofollow">latest audigy drivers[/url]
    once your back in to windows try recording something and see if everything's back to normal
    now reinstalling your web cam but don't reinstall using the cd that came with it
    find the manufacturer's website and get the latest drivers
    install cd's best avoided simply because the software and drivers they contain are typically the initial release versions, and so potentially very old
    and i think we can all agree that old, buggy drivers can be a real pain

  • Intermittent sound & phone freezing

    Today i have noticed my iphone 4 has intermittent sound. The ringer is on, but when someone calls it doesn't always ring, and has also frozen too. The keyboard clicks don't always work, nor do the text tones.  Vibrate still seems to be working ok.
    The only thing I have changed in the last 24 hours is I updated my iPhone 4 with the new iOS 5.0.1 as it asked me to yesterday.
    Is anyone else having the same problem or had it before?

    Welcome to the Apple discussions.
    Have you run the Apple hardware test? If you have either of the TechTool programs they can do the same testing. Find the original OS X discs that came with the system, and one should say in small print on the label 'AHT Version x.x'. Insert it and reboot holding the option key down, choose the Apple hardware test, click the arrow to the right, follow directions, and choose the extended test. Does it identify any issues?

  • AirPlay Mirroring from Mac to Apple TV intermittent sound drop-off

    I can't stream iTunes or Spotify to my Apple TV without getting intermittent sound drop-out (say every 30 seconds) when I use AirPlay mirroring through my Mac. This odd thing is streaming through my iPad or IPhone to Apple TV is perfectly fine; so is using my Mac to stream to my Sonos speakers. I can even stream iTunes pefectly fine through only the Apple TV alone - so it's nothing to do with my broadband connection
    I have today performed upgrades to the Apple TV and my Airport Express firmware but the problem persists. Anyone else experiencing this or found a solution?

    Hi, same here for me. Using AirPlay for streaming music from my Mac Mini (iTunes latest version) to my ATV2 (software latest version) has intermittent drop-outs (about every 10 to 15 sec for 5 to 10 sec). At the same time streaming to my Airport Express station in the kitchen works fine. Using the VOX player streaming from the Mac to the ATV works fine, only that I can only stream to one destination. Tried streaming from iTunes to ATV only, the problem remains. Streaming video - even HD - works fine. Using the ATV to select music from my Mac's iTunes library works fine, too. Still I want to stream from my iTunes on the Mac to several destiations including the ATV. Seems to me to be a problem of iTunes. I think the effect appeared after an update of iTunes or OSX, because it had worked fine before, already.

  • Intermittent sound using dd live pack, spdif to home theater spdif.

    . when using dd li've pack to listen to audio through home theater, connecting spdif out on elite pro module to spdif in, i have only intermittent sound. there is no common timing, just sound on and off. as the sound comes on, on my computer i have the dolby digital li've bitstream out "bug" that comes on in the lower left hand corner of my screen, then goes away when sound off. i am listening in entertainment mode. i don't really know what else to say. does anyone else have this [email protected]

    G? A lot of Audigy DDL users have reported 5. signal being lost randomly.
    Mine cuts out and Dolby Digital Li've becomes plain PCM (stereo on the receiver). It only does it for a second, then 5. gets restored. Then a few seconds/minutes/hours later it happens again.
    Sounds somewhat related to the X-Fi issues.... perhaps is the same thing?
    heavyd wrote:
    when using dd li've pack to listen to audio through home theater, connecting spdif out on elite pro module to spdif in, i have only intermittent sound. there is no common timing, just sound on and off. as the sound comes on, on my computer i have the dolby digital li've bitstream out "bug" that comes on in the lower left hand corner of my screen, then goes away when sound off. i am listening in entertainment mode. i don't really know what else to say. does anyone else have this problem?

  • Intermittent Sound Breakup With Audigy Va

    I am getting intermittent breakup of sound which has become quite annoying. This happens
    with playback of videos and music,however this doesn't happen on XP.
    Has anyone else had this problem with any of the Audigy cards or am I the only one with
    this problem?
    This happens both with the latest Vista driver and the XP driver I was able to install,
    both give exactly the same result.

    I've the same problem with my Audigy value, but if i switch to my onboard sound the problem stays the same, so i think it can't be the creative drivers...

  • Each time i press the power button i just have a blank white screen, and intermittent sounds/tone. No apple logo, or spinning circle.

    Each time i press the power button i just have a blank white screen, and intermittent sounds/tone. No apple logo, or spinning circle.
    I used to install the rEFIt to boot with win7. When I deleted win7, I didn't uninstall rEFIt. Nothing wrong with it. One day after I watched movie in full screen,I pressed esc to quit. Then I found the touchpad didn't work. I can't turn off air. I just pressed power button for a little while. It rebooted, then my nightmare just began...
    I have tried everything, PRAM, command+R, literally everything. No change.
    But when I plug a CD-ROM with USB, I can only here one BONG, just once, then white screen, Like waiting for something...
    I took it to a service center in China, they told me the CPU had broken. SInce it's one month out of warranty, they wanted to charge me for like $250....
    I really don't think that's CPU's problem. I checked the history, it seems like somebody else also had the problem before.
    Can anyone give me some hints??? Thanks!!!!!! Or I have to take it back to America to check....

    Impossible, there are zero, as in none, zip, nadda viruses for OS X. If you have viruses on it they are for MS Windows and will not affect OS X. I suspect the hard disk has crashed, if you have backup then it's not a big deal to have it changed, just take it into your local Apple Store or AASP for service. If you have not been backing it up you may be in for a painful lesson on why backup is critical.

  • HT4085 Some videos that are taken with my iphone's camera are not making sounds, this problem occured today to all videos i record, please help

    Some videos that are taken with my iphone's camera are not making sounds, this problem occured today to all videos i recorded starting from today, please help

    It also takes time for the photos to be transferred out of your iPhone and into Photo stream on Apple's iCloud servers.
    Note that this can't happen if your iPhone is not connected to a WiFi network:
    When you enable My Photo Stream on your devices, all new photos you take or import to those devices will be automatically added to your photo stream.
    iOS devices: New photos you take are automatically uploaded to your photo stream when you leave the Camera app and are connected to Wi-Fi. My Photo Stream does not push photos over cellular connections.
    Macs: Any new photos you import to iPhoto or Aperture begin uploading automatically when you have a Wi-Fi or Ethernet connection. Or you can change your iPhoto or Aperture preferences so that only photos you manually add to My Photo Stream are uploaded.
    PC with iCloud Control Panel 2.0 or later: Open a Windows Explorer window and under Favorites select iCloud Photos if you are using iCloud Control Panel 3.0 (or Photo Stream if you are using 2.0 to 2.1.2). Open My Photo Stream. Click the "Add photos" button. Select the photos to import to My Photo Stream, then click Open.
    from here: http://support.apple.com/kb/ht4106

  • Sound device problem in ZONE

    I created a solaris zone for my desktop use, but the sound device was not avaialbe. I tried to export it from the global zone:
    device
    match: /dev/sound/*
    then rebooted the zone, login it, found there were several files added in /dev:
    lrwxrwxrwx   1 root     root           7 Sep 17 14:50 /dev/audio -> sound/0
    lrwxrwxrwx   1 root     root          10 Sep 17 14:50 /dev/audioctl -> sound/0ctl
    crw-------   1 root     root      34,  0 Sep 17 14:50 /dev/sound/0
    crw-------   1 root     root      34,  1 Sep 17 14:50 /dev/sound/0ctlThe problem is: how to change the /dev/sound/* files for all users to read and write, permanently?
    I tried the following methods but failed:
    1. Change manually these files' mode to a+rw as root. But once I logged out the zone or rebooted the zone, the changes were lost.
    2. Create a script in /etc/init.d/ and link it to /etc/rc3.d/ to let it auto execcute when boot, as below:
    #!/sbin/sh
    /usr/bin/chmod a+rw /dev/sound/*
    echo `date '+%D %H:%M:%S' > /var/tmp/enable.audio.log
    ls -le /dev/sound/* >> /var/tmp/enable.audio.logthe content of /var/tmp/enable.audio.log is something like:
    crw-rw-rw-   1 root     root      34,  0  9月 17 14:50:30 2005 /dev/sound/0
    crw-rw-rw-   1 root     root      34,  1  9月 17 14:50:30 2005 /dev/sound/0ctlBut oddly, the permissions of these files would always be changed back to the original state soon, automatically.
    3. I added an entry in /var/spool/cron/crontabs/root to change the permissions every 10 mins, and it did work, strangely. However I think it's not a good method, because I have to wait for 10 minutes before I can login it (if I login the zone before the permissions were changed, the sound device will never work)
    Thanks in advance.

    It's probably /etc/logindevperm that's fighting you. Read the comments in that file, then you can modify /dev/sound in it.
    The idea is that only the user logged in on the console would normally have access to the audio device and the frame buffer, so the permissions are reset at login.
    If you're having folks login through a separate zone, this changes that assumption.
    Darren

  • Sound & Bluetooth problems for lenovo G 560

        Sound & Bluetooth problems for lenovo G 560-
    Speakers create noise when increase the sound or change window.
    Bluetooth icon & drivers dissappear after sometime.(Fn + F5 doesn't work)
    They appear again after restart.
    Warranty Status Lookup
    Product ID:        Type-Model:        Serial number:
    59304299        0679-N/A        CBxxxxxxxx
    Location:        Expiration date:        
    India                  2012-08-31        
    Moderator Note; s/n edited for member's own protection

    Hi lenovoG60,
    Welcome to Lenovo Community!
    You may want to try updating all of your machine drivers such as
    Lenovo Energy Management (power management)
    Bluetooth drivers
    Sound card drivers
    Chipset drivers
    Look for the drivers from our support site.
    Best regards,
    Cleo
    WW Social Media
    T61, T410, x240, Z500, Flex 14
    Important Note: If you need help, post your question in the forum, and include your system type, model number and OS. Do not post your serial number.
    Did someone help you today? Press the star on the left to thank them with a Kudo!
    If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"!
    Follow @LenovoForums on Twitter!
    How to send a private message? --> Check out this article.
    English Community   Deutsche Community   Comunidad en Español   Русскоязычное Сообщество

  • Intermittant sound on iPad

    Ihaving intermittant sound on iPad. I have done numerous soft &hard resets, checked all settings (nothing to do with side switch) sound present with earphones and works when checking ring tone but when playing music keeps cutting out & slide volume bar disappears also??  It affects the keyboard clicks as well.

    Looks like an internal fault with the auto card. I would suggest taking your iPad to a local Apple store for further diagnostics.

  • Intermittent sound fault with keyboard clicks

    Hi there,
    I have recently purchased an iPad2, and there seems to be an intermittent sound fault only involving the keyboard click sounds.
    The sound works fine on music and other content and I have tried deselecting and reselecting the keyboard clicks on/off in the settings page, but to no avail.
    Do you have any suggestions?

    If it happens intermittently, then I would think that it cannot be an incorrect setting, or having system sounds muted. Do you ever restart your iPad - or reboot it?
    Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button.
    Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.

Maybe you are looking for

  • Problems after upgrading software to Lion

    I recently upgraded my Spring 2011 15 inch MB to lion and ever since it has became painfully slow.  Anything I can do to resolve this?

  • Can't download music on palm pre plus

    I can't transfer music from compute to my palm pre plus. Even with windows media or itunes. My palm doesn't reconize it as a mp3 file so it doesn't registerer on my phone as musi file. I did click and drag to my phone and also use windows media to sy

  • Camtasia flash files in Robohelp

    I am trying to add camtasia video clips (swf or html) into my RoboHelp project. I add them as baggage files then link them in the document. When I go to view them online the video plays but there are no controls (play, stop pause, volume control). I

  • Reg:POWL INBOX work item error

    Hi All We have configured Powl by using Application Name : IBO_WDA_INBOX Configuration Name: IBO_WDAC_POWL_INBOX We are able to get the notification and workitems . But when we click on work items its throwing an error . There is no iview available f

  • Why is this error coming up?

    very few minutes I get an error message that says "The application HPIO Trap Monitor quit unexpectedly" The is i want to ignore relaunch or report. I hut report send it out and a few minutes later it is back This started right after the upgrade. What