Intermittent Startup Issues, Fan Reving
Has anyone else had startup issues with the G5's? I have had to re-seat memory in my lab on 3 machines and this seems, so far, to have alleviated the problem.
The funny thing is I have had these machines for about 8 months and never had this problem. My computers are locked and access to the physical memory is impossible.
Just curious?
Once I tried to run in Open Firmware the computer beeped 3 times, thus telling me it was a memory issue. Each of the machines exhibited different symptoms??? One was caught in the blue screen. One in the gray screen with neverending fan reving and spinning startup wheel. Lastly, a frozen computer (in an account) where all keyboard and mouse commands are not recognized. Upon hard shutdown and restart either this machine ended up stuck in gray screen **** or started ok.
Yeah, if you are in a humid lab (i.e. animal research lab) or some other unique environment sometimes the conditions can be less than ideal.
Most electromechanical connections, such as the slots where the RAM plug in or PCI card slots or cable connections, are more apt to become less than optimal in such a condition.
Another problem tends to be that the G5 is a hunk of cold metal when powered down or even sleeping and in a cold room. Humidity loves to condense on cold metal and has been known to cause problems.
However, since all you have had to do thus far is re-seat the RAM, the impact seems to be minimal at this time.
Luck-
-DaddyPaycheck
Similar Messages
-
Have any ideas re: G5 startup issues? Long post...
My dual processor G5 (purchased Jan. 2005) is in the shop, and, of course, out of warranty. It's been down for over two weeks. Here is the story of its demise:
Installed 10.4.9 upgrade. Began having "launch systems" and crashdump/usb crash errors thereafter. Not a lot of info online regarding these problems, so I decided to do an archive and re-install of my system software.
Started having intermittent problems restarting the G5. Either it would chime, but not kick on the monitor, chime and kick on the monitor but hang at the grey apple startup screen, or not chime at all, with which only the fans would come on. Apple Extended Hardware Test came back OK. Still had problems after removing my USB devices.
Problems continued after the reinstall of the system software, eventually to the point where I could not even boot from a CD. When the G5 did operate, after a short period of use it would freeze, and I would have to force a restart and pray it would boot up completely. It would reliably freeze after waking it from sleep, but also froze in iPhoto and Finder as well.
I have tried resetting the PMU and the PRAM with no improvement. Took it to an Apple Authorized Service Center, luckily only a couple miles from where I work. They tried booting with the Apple RAM only, then the third party RAM only, no improvement. Hard drive was completely reformatted and system reinstalled, no improvement. I am waiting to hear what else they've tried.
My G5's serial # falls outside of those involved with the power supply issues. Yet, could this be a possibility? Any other ideas as to what the problem could be, or has anyone had similar issues?
I freelance as a graphic designer and this has me in a panic. Now using the hubby's Intel iMac to run CS2 and it's a drag.
Thanks in advance.Hi and thanks for the input. I just spoke to the Apple service guy and he still insists there is not a hardware issue. Apparently there is an Apple technical doc, available only to authorized techs, that refers to this particular issue, and the fix is a download and install (firmware, perhaps?) He has to contact Apple and confirm my G5 is within the serial # range for this particular fix.
That's my best interpretation of our discussion. He was rather cryptic. But he says it's not the power supply.
I did an archive and install because, like an idiot, I did not have anything backed up at that point. After that failed, I used up my stash of DVDs and copied gigs to our iMac until the G5 gave out. I had run the hardware test several times and each time came back clean.
Permissions were repaired before and after updates; had it freeze a couple times mid-update. Tried booting in safe mode and single-user mode and still had the same startup issues.
To add insult to injury, I purchased a LaCie Porsche external drive as an eventual backup drive whenever the G5 returns. Hooked it up to our iMac to backup the items I saved off the G5. It failed after the second use. Returned for replacement.
Thanks.
G5 Dual 2.5 MHz Mac OS X (10.4.8) -
My new MacBook Pro 17" has been having startup issues recently. After I shut down, leave, and come back, the startup issue occurs.
After pressing the power button, fans will go on, proccessing noises occur, HOWEVER, it just boots to a white/grey screen W/OUT the apple logo or round loading bar. The keyboard does not initialize either.
The only thing that I have found to 'fix' it, is just to leave it powered off for an extended period of time. It will then boot up.
I have tried many non-software related 'cures', and my compuer is completely up to date on all OsX software.
Any ideas guys??you can try to boot to safe mode ( restart holding Shift )
- you can attempt to boot to install disc and disk utility
- you can boot to AHT ( apple hardware test ) to see what component is failing ( insert disc, restart holding D )
- chances are, this is a hardware issue though. you will probably need repairs. -
My G4 MDD Dual 1.25 has been acting up lately. Sleep from the power button for from the apple menu doesn't work and after attempted, certain features such as "About This Mac" cannot be performed, along with other (abeit, minor) instabilities. Following the advice I have gleaned from this forum, I have been resetting the PMU which fixes the problems. Everything seems okay for about 1-3 weeks, then the same power issues surface again. I installed a new fresh battery, but the intermittent PMU issue is still there. Really strange. It works well, then it begins with an error message on startup about the Date and Time being set before March of 2001 or something like that, then the sleep and power issues follow. Anyone else experience this?
G4 MDD Dual 1.25 2mb L3 Cache
OSX.4.11
No apparent issues with USB or Firewire connections, after unplugging all except the keyboard and mouse--the same power issues are present after restart.
I am using a TripLite Batter backup unit that keeps the utility power constant at 120v.
I posted the above topic back in August of 2008, after searching for an answer in this forum and elsewhere. Here I am to report on the final fix. I replaced the power supply unit, and all the issues went away. This was not seemingly a straightforward solution, at least not to me. For over a year, the issue became more serious with frequent occasions when the computer did not even start. Hit the button and the light would appear for moment but no power up. I kept reading anything I could for an answer. I tried anything and everything I read on forums, but the problem persisted. It took several months, but eventually I read about the possible cause being the power supply unit, so I got a used replacement from ebay. I was so relieved to see the computer start up on the first attempt. Two weeks later, no issues. Just thought I would share my experience and maybe help someone who reads this.Has new fresh battery. Problem persists. Perhaps some error with the PMU chip itself? Would there be a firmware update to fix the problem?
-
MacBook Air intermittently has issues connecting to websites when wireless shows connected to the internet. The pages show that I am offline, but I can ping Google DNS. Windows PC, iPhone and Android phone have no issue displaying the same web pages.How do I solve this issue?
Go step by step and test.
1. Power off the router. Unplug it from the wall. Wait a while.
Plug it back to the wall. Power the router on. Wait until all the lights are lit properly. It will take a while.
Restart the computer.
Start up in Safe Mode.
http://support.apple.com/kb/PH14204
2. Empty Caches
Safari > Preference > Advanced
Checkmark the box for "Show Develop menu in menu bar".
Develop menu will appear in the Safari menu bar.
Click Develop and select "Empty Caches" from the dropdown.
3. Deselect Proxies if selected.
System Preference > Network > Advanced > Proxies Tab
Under "Select Protocol", uncheck any box if selected.
Click "OK" then "Apply”. -
Intermittent access issue with Oracle Applications EBS R12.1.3 URL
We are facing intermittent access issue with EBS R12.1.3 URL .There are no errors generated in the access log and the IP from which we are using to access is the URL does not appear in the access log either.
1. No of concurrent users : 10 at a time
2. no. of JVM Processes for OACORE : 1
<oacore_nprocs oa_var="s_oacore_nprocs">1</oacore_nprocs> 3. Heap size settings:
<oacore_jvm_start_options oa_var="s_oacore_jvm_start_options">-server -verbose:gc -Xmx1024M -Xms128M -XX:MaxPermSize=160M -XX:NewRatio=2 -XX:+PrintGCTimeStamps -XX:+UseTLAB -XX:+UseParallelGC -XX:ParallelGCThreads=2 -Dcom.sun.management.jmxremote -Djava.security.policy=$ORACLE_HOME/j2ee/oacore/config/java2.policy -Djava.awt.headless=true -Dhttp.webdir.enable=false -Doracle.security.jazn.config=/u01/ebsstack/NFR2DW/inst/apps/NFR2DW_cinvlapp3036/ora/10.1.3/j2ee/oacore/config/jazn.xml</oacore_jvm_start_options>
<oacore_jvm_stop_options oa_var="s_oacore_jvm_stop_options">-server -verbose:gc -Xmx1024M -Xms128M -XX:MaxPermSize=160M -XX:NewRatio=2 -XX:+PrintGCTimeStamps -XX:+UseTLAB -XX:+UseParallelGC -XX:ParallelGCThreads=2 -Djava.security.policy=$ORACLE_HOME/j2ee/oacore/config/java2.policy -Djava.awt.headless=true -Dhttp.webdir.enable=false</oacore_jvm_stop_options>
<oacore_nprocs oa_var="s_oacore_nprocs">1</oacore_nprocs>15/01/09 02:25:44.713 html: Broken pipe
15/01/09 02:25:44.724 html: Broken pipe
15/01/09 02:25:44.725 html: Broken pipe
15/01/09 02:25:44.725 html: Broken pipe
15/01/09 02:25:44.725 html: Broken pipe
15/01/09 02:25:44.725 html: Servlet error
java.io.IOException: Broken pipe
at sun.nio.ch.FileDispatcher.write0(Native Method)
at sun.nio.ch.SocketDispatcher.write(SocketDispatcher.java:29)
at sun.nio.ch.IOUtil.writeFromNativeBuffer(IOUtil.java:104)
at sun.nio.ch.IOUtil.write(IOUtil.java:75)
at sun.nio.ch.SocketChannelImpl.write(SocketChannelImpl.java:334)
at java.nio.channels.Channels.write(Channels.java:60)
at java.nio.channels.Channels.access$000(Channels.java:47)
at java.nio.channels.Channels$1.write(Channels.java:134)
at com.evermind.server.http.AJPOutputStream.endRequest(AJPOutputStream.java:117)
at com.evermind.server.http.AJPRequestHandler.run(AJPRequestHandler.java:317)
at com.evermind.server.http.AJPRequestHandler.run(AJPRequestHandler.java:199)
at oracle.oc4j.network.ServerSocketReadHandler$SafeRunnable.run(ServerSocketReadHandler.java:260)
at com.evermind.util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:303)
at java.lang.Thread.run(Thread.java:619)
15/01/09 02:25:44.696 html: Broken pipe
15/01/09 02:25:44.725 html: Broken pipe
15/01/09 02:25:44.725 html: Broken pipe
15/01/09 02:25:44.725 html: Broken pipe
15/01/09 02:25:44.726 html: Broken pipe
15/01/09 02:25:44.726 html: Servlet error
java.io.IOException: Broken pipe
at sun.nio.ch.FileDispatcher.write0(Native Method)
at sun.nio.ch.SocketDispatcher.write(SocketDispatcher.java:29)
at sun.nio.ch.IOUtil.writeFromNativeBuffer(IOUtil.java:104)
at sun.nio.ch.IOUtil.write(IOUtil.java:75)
at sun.nio.ch.SocketChannelImpl.write(SocketChannelImpl.java:334)
at java.nio.channels.Channels.write(Channels.java:60)
at java.nio.channels.Channels.access$000(Channels.java:47)
at java.nio.channels.Channels$1.write(Channels.java:134)
at com.evermind.server.http.AJPOutputStream.endRequest(AJPOutputStream.java:117)
at com.evermind.server.http.AJPRequestHandler.run(AJPRequestHandler.java:317)
at com.evermind.server.http.AJPRequestHandler.run(AJPRequestHandler.java:199)
at oracle.oc4j.network.ServerSocketReadHandler$SafeRunnable.run(ServerSocketReadHandler.java:260)
at com.evermind.util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:303)
at java.lang.Thread.run(Thread.java:619)
15/01/09 02:25:44.956 html: Broken pipe
15/01/09 02:25:44.956 html: Broken pipe
15/01/09 02:25:44.956 html: Broken pipe
15/01/09 02:25:44.956 html: Broken pipe
15/01/09 02:25:44.956 html: Broken pipe
15/01/09 02:25:44.956 html: Servlet error
java.io.IOException: Broken pipe
at sun.nio.ch.FileDispatcher.write0(Native Method)
at sun.nio.ch.SocketDispatcher.write(SocketDispatcher.java:29)
at sun.nio.ch.IOUtil.writeFromNativeBuffer(IOUtil.java:104)
at sun.nio.ch.IOUtil.write(IOUtil.java:75)
at sun.nio.ch.SocketChannelImpl.write(SocketChannelImpl.java:334)
at java.nio.channels.Channels.write(Channels.java:60)
at java.nio.channels.Channels.access$000(Channels.java:47)
at java.nio.channels.Channels$1.write(Channels.java:134)
at com.evermind.server.http.AJPOutputStream.endRequest(AJPOutputStream.java:117)
at com.evermind.server.http.AJPRequestHandler.run(AJPRequestHandler.java:317)
at com.evermind.server.http.AJPRequestHandler.run(AJPRequestHandler.java:199)
at oracle.oc4j.network.ServerSocketReadHandler$SafeRunnable.run(ServerSocketReadHandler.java:260)
at oracle.oc4j.network.ServerSocketAcceptHandler.procClientSocket(ServerSocketAcceptHandler.java:234)
at oracle.oc4j.network.ServerSocketAcceptHandler.access$700(ServerSocketAcceptHandler.java:29)
at oracle.oc4j.network.ServerSocketAcceptHandler$AcceptHandlerHorse.run(ServerSocketAcceptHandler.java:879)
at com.evermind.util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:303)
at java.lang.Thread.run(Thread.java:619)
15/01/09 02:25:45.9 html: Broken pipe
15/01/09 02:25:45.10 html: Broken pipe
15/01/09 02:25:45.10 html: Broken pipe
15/01/09 02:25:45.10 html: Broken pipe
15/01/09 02:25:45.10 html: Broken pipe
15/01/09 02:25:45.10 html: Servlet error
java.io.IOException: Broken pipe
at sun.nio.ch.FileDispatcher.write0(Native Method)
at sun.nio.ch.SocketDispatcher.write(SocketDispatcher.java:29)
at sun.nio.ch.IOUtil.writeFromNativeBuffer(IOUtil.java:104)
at sun.nio.ch.IOUtil.write(IOUtil.java:75)
at sun.nio.ch.SocketChannelImpl.write(SocketChannelImpl.java:334)
at java.nio.channels.Channels.write(Channels.java:60)
at java.nio.channels.Channels.access$000(Channels.java:47)
at java.nio.channels.Channels$1.write(Channels.java:134)
at com.evermind.server.http.AJPOutputStream.endRequest(AJPOutputStream.java:117)
at com.evermind.server.http.AJPRequestHandler.run(AJPRequestHandler.java:317)
at com.evermind.server.http.AJPRequestHandler.run(AJPRequestHandler.java:199)
at oracle.oc4j.network.ServerSocketReadHandler$SafeRunnable.run(ServerSocketReadHandler.java:260)
at com.evermind.util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:303)
at java.lang.Thread.run(Thread.java:619)
15/01/09 02:25:45.64 html: Broken pipe
15/01/09 02:25:45.64 html: Broken pipe
15/01/09 02:25:45.64 html: Servlet error
java.io.IOException: Broken pipe
at sun.nio.ch.FileDispatcher.write0(Native Method)
at sun.nio.ch.SocketDispatcher.write(SocketDispatcher.java:29)
at sun.nio.ch.IOUtil.writeFromNativeBuffer(IOUtil.java:104)
at sun.nio.ch.IOUtil.write(IOUtil.java:75)
at sun.nio.ch.SocketChannelImpl.write(SocketChannelImpl.java:334)
at java.nio.channels.Channels.write(Channels.java:60)
at java.nio.channels.Channels.access$000(Channels.java:47)
at java.nio.channels.Channels$1.write(Channels.java:134)
at com.evermind.server.http.AJPOutputStream.endRequest(AJPOutputStream.java:117)
at com.evermind.server.http.AJPRequestHandler.run(AJPRequestHandler.java:317)
at com.evermind.server.http.AJPRequestHandler.run(AJPRequestHandler.java:199)
at oracle.oc4j.network.ServerSocketReadHandler$SafeRunnable.run(ServerSocketReadHandler.java:260)
at com.evermind.util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:303)
at java.lang.Thread.run(Thread.java:619)
15/01/09 02:25:45.512 html: Broken pipe
15/01/09 02:25:45.512 html: Broken pipe
15/01/09 02:25:45.513 html: Broken pipe
15/01/09 02:25:45.513 html: Broken pipe
15/01/09 02:25:45.513 html: Broken pipe
15/01/09 02:25:45.513 html: Servlet error
java.io.IOException: Broken pipe
at sun.nio.ch.FileDispatcher.write0(Native Method)
at sun.nio.ch.SocketDispatcher.write(SocketDispatcher.java:29)
at sun.nio.ch.IOUtil.writeFromNativeBuffer(IOUtil.java:104)
at sun.nio.ch.IOUtil.write(IOUtil.java:75)
at sun.nio.ch.SocketChannelImpl.write(SocketChannelImpl.java:334)
at java.nio.channels.Channels.write(Channels.java:60)
at java.nio.channels.Channels.access$000(Channels.java:47)
at java.nio.channels.Channels$1.write(Channels.java:134)
at com.evermind.server.http.AJPOutputStream.endRequest(AJPOutputStream.java:117)
at com.evermind.server.http.AJPRequestHandler.run(AJPRequestHandler.java:317)
at com.evermind.server.http.AJPRequestHandler.run(AJPRequestHandler.java:199)
at oracle.oc4j.network.ServerSocketReadHandler$SafeRunnable.run(ServerSocketReadHandler.java:260)
at oracle.oc4j.network.ServerSocketAcceptHandler.procClientSocket(ServerSocketAcceptHandler.java:234)
at oracle.oc4j.network.ServerSocketAcceptHandler.access$700(ServerSocketAcceptHandler.java:29)
at oracle.oc4j.network.ServerSocketAcceptHandler$AcceptHandlerHorse.run(ServerSocketAcceptHandler.java:879)
at com.evermind.util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:303)
at java.lang.Thread.run(Thread.java:619)
15/01/09 02:25:45.549 html: Broken pipe
15/01/09 02:25:45.549 html: Broken pipe
15/01/09 02:25:45.549 html: Broken pipe
15/01/09 02:25:45.549 html: Broken pipe
15/01/09 02:25:45.549 html: Broken pipe
15/01/09 02:25:45.550 html: Servlet error
java.io.IOException: Broken pipe
at sun.nio.ch.FileDispatcher.write0(Native Method)
at sun.nio.ch.SocketDispatcher.write(SocketDispatcher.java:29)
at sun.nio.ch.IOUtil.writeFromNativeBuffer(IOUtil.java:104)
at sun.nio.ch.IOUtil.write(IOUtil.java:75)
at sun.nio.ch.SocketChannelImpl.write(SocketChannelImpl.java:334)
at java.nio.channels.Channels.write(Channels.java:60)
at java.nio.channels.Channels.access$000(Channels.java:47)
at java.nio.channels.Channels$1.write(Channels.java:134)
at com.evermind.server.http.AJPOutputStream.endRequest(AJPOutputStream.java:117)
at com.evermind.server.http.AJPRequestHandler.run(AJPRequestHandler.java:317)
at com.evermind.server.http.AJPRequestHandler.run(AJPRequestHandler.java:199)
at oracle.oc4j.network.ServerSocketReadHandler$SafeRunnable.run(ServerSocketReadHandler.java:260)
at com.evermind.util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:303)
at java.lang.Thread.run(Thread.java:619)
15/01/09 02:25:45.604 html: Broken pipe
15/01/09 02:25:45.605 html: Broken pipe
15/01/09 02:25:45.605 html: Broken pipe
15/01/09 02:25:45.605 html: Broken pipe
15/01/09 02:25:45.605 html: Broken pipe
15/01/09 02:25:45.605 html: Servlet error
java.io.IOException: Broken pipe
at sun.nio.ch.FileDispatcher.write0(Native Method)
at sun.nio.ch.SocketDispatcher.write(SocketDispatcher.java:29)
at sun.nio.ch.IOUtil.writeFromNativeBuffer(IOUtil.java:104)
at sun.nio.ch.IOUtil.write(IOUtil.java:75)
at sun.nio.ch.SocketChannelImpl.write(SocketChannelImpl.java:334)
at java.nio.channels.Channels.write(Channels.java:60)
at java.nio.channels.Channels.access$000(Channels.java:47)
at java.nio.channels.Channels$1.write(Channels.java:134)
at com.evermind.server.http.AJPOutputStream.endRequest(AJPOutputStream.java:117)
at com.evermind.server.http.AJPRequestHandler.run(AJPRequestHandler.java:317)
at com.evermind.server.http.AJPRequestHandler.run(AJPRequestHandler.java:199)
at oracle.oc4j.network.ServerSocketReadHandler$SafeRunnable.run(ServerSocketReadHandler.java:260)
at com.evermind.util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:303)
at java.lang.Thread.run(Thread.java:619)
15/01/09 02:25:45.609 html: Broken pipe
15/01/09 02:25:45.609 html: Broken pipe
15/01/09 02:25:45.609 html: Broken pipe
15/01/09 02:25:45.609 html: Broken pipe
15/01/09 02:25:45.609 html: Broken pipe
15/01/09 02:25:45.609 html: Servlet error
java.io.IOException: Broken pipe
at sun.nio.ch.FileDispatcher.write0(Native Method)
at sun.nio.ch.SocketDispatcher.write(SocketDispatcher.java:29)
at sun.nio.ch.IOUtil.writeFromNativeBuffer(IOUtil.java:104)
at sun.nio.ch.IOUtil.write(IOUtil.java:75)
at sun.nio.ch.SocketChannelImpl.write(SocketChannelImpl.java:334)
at java.nio.channels.Channels.write(Channels.java:60)
at java.nio.channels.Channels.access$000(Channels.java:47)
at java.nio.channels.Channels$1.write(Channels.java:134)
at com.evermind.server.http.AJPOutputStream.endRequest(AJPOutputStream.java:117)
at com.evermind.server.http.AJPRequestHandler.run(AJPRequestHandler.java:317)
at com.evermind.server.http.AJPRequestHandler.run(AJPRequestHandler.java:199)
at oracle.oc4j.network.ServerSocketReadHandler$SafeRunnable.run(ServerSocketReadHandler.java:260)
at com.evermind.util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:303)
at java.lang.Thread.run(Thread.java:619)
15/01/09 02:25:45.611 html: Broken pipe
15/01/09 02:25:45.611 html: Broken pipe
15/01/09 02:25:45.611 html: Broken pipe
15/01/09 02:25:45.611 html: Broken pipe
15/01/09 02:25:45.612 html: Broken pipe
15/01/09 02:25:45.612 html: Servlet error
java.io.IOException: Broken pipe
at sun.nio.ch.FileDispatcher.write0(Native Method)
at sun.nio.ch.SocketDispatcher.write(SocketDispatcher.java:29)
at sun.nio.ch.IOUtil.writeFromNativeBuffer(IOUtil.java:104)
at sun.nio.ch.IOUtil.write(IOUtil.java:75)
at sun.nio.ch.SocketChannelImpl.write(SocketChannelImpl.java:334)
at java.nio.channels.Channels.write(Channels.java:60)
at java.nio.channels.Channels.access$000(Channels.java:47)
at java.nio.channels.Channels$1.write(Channels.java:134)
at com.evermind.server.http.AJPOutputStream.endRequest(AJPOutputStream.java:117)
at com.evermind.server.http.AJPRequestHandler.run(AJPRequestHandler.java:317)
at com.evermind.server.http.AJPRequestHandler.run(AJPRequestHandler.java:199)
at oracle.oc4j.network.ServerSocketReadHandler$SafeRunnable.run(ServerSocketReadHandler.java:260)
at oracle.oc4j.network.ServerSocketAcceptHandler.procClientSocket(ServerSocketAcceptHandler.java:234)
at oracle.oc4j.network.ServerSocketAcceptHandler.access$700(ServerSocketAcceptHandler.java:29)
at oracle.oc4j.network.ServerSocketAcceptHandler$AcceptHandlerHorse.run(ServerSocketAcceptHandler.java:879)
at com.evermind.util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:303)
at java.lang.Thread.run(Thread.java:619)
15/01/09 02:25:45.613 html: Broken pipe
15/01/09 02:25:45.613 html: Broken pipe
15/01/09 02:25:45.613 html: Broken pipe
15/01/09 02:25:45.613 html: Broken pipe
15/01/09 02:25:45.613 html: Broken pipe
15/01/09 02:25:45.614 html: Servlet error
java.io.IOException: Broken pipe
at sun.nio.ch.FileDispatcher.write0(Native Method)
at sun.nio.ch.SocketDispatcher.write(SocketDispatcher.java:29)
at sun.nio.ch.IOUtil.writeFromNativeBuffer(IOUtil.java:104)
at sun.nio.ch.IOUtil.write(IOUtil.java:75)
at sun.nio.ch.SocketChannelImpl.write(SocketChannelImpl.java:334)
at java.nio.channels.Channels.write(Channels.java:60)
at java.nio.channels.Channels.access$000(Channels.java:47)
at java.nio.channels.Channels$1.write(Channels.java:134)
at com.evermind.server.http.AJPOutputStream.endRequest(AJPOutputStream.java:117)
at com.evermind.server.http.AJPRequestHandler.run(AJPRequestHandler.java:317)
at com.evermind.server.http.AJPRequestHandler.run(AJPRequestHandler.java:199)
at oracle.oc4j.network.ServerSocketReadHandler$SafeRunnable.run(ServerSocketReadHandler.java:260)
at oracle.oc4j.network.ServerSocketAcceptHandler.procClientSocket(ServerSocketAcceptHandler.java:234)
at oracle.oc4j.network.ServerSocketAcceptHandler.access$700(ServerSocketAcceptHandler.java:29)
at oracle.oc4j.network.ServerSocketAcceptHandler$AcceptHandlerHorse.run(ServerSocketAcceptHandler.java:879)
at com.evermind.util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:303)
at java.lang.Thread.run(Thread.java:619)
15/01/09 02:25:45.616 html: Broken pipe
15/01/09 02:25:45.616 html: Broken pipe
15/01/09 02:25:45.617 html: Broken pipe
15/01/09 02:25:45.617 html: Broken pipe
15/01/09 02:25:45.617 html: Broken pipe
15/01/09 02:25:45.617 html: Servlet error
java.io.IOException: Broken pipe
at sun.nio.ch.FileDispatcher.write0(Native Method)
at sun.nio.ch.SocketDispatcher.write(SocketDispatcher.java:29)
at sun.nio.ch.IOUtil.writeFromNativeBuffer(IOUtil.java:104)
at sun.nio.ch.IOUtil.write(IOUtil.java:75)
at sun.nio.ch.SocketChannelImpl.write(SocketChannelImpl.java:334)
at java.nio.channels.Channels.write(Channels.java:60)
at java.nio.channels.Channels.access$000(Channels.java:47)
at java.nio.channels.Channels$1.write(Channels.java:134)
at com.evermind.server.http.AJPOutputStream.endRequest(AJPOutputStream.java:117)
at com.evermind.server.http.AJPRequestHandler.run(AJPRequestHandler.java:317)
at com.evermind.server.http.AJPRequestHandler.run(AJPRequestHandler.java:199)
at oracle.oc4j.network.ServerSocketReadHandler$SafeRunnable.run(ServerSocketReadHandler.java:260)
at com.evermind.util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:303)
at java.lang.Thread.run(Thread.java:619)
15/01/09 02:25:45.635 html: Broken pipe
15/01/09 02:25:45.635 html: Broken pipe
15/01/09 02:25:45.635 html: Broken pipe
15/01/09 02:25:45.635 html: Broken pipe
15/01/09 02:25:45.635 html: Broken pipe
15/01/09 02:25:45.635 html: Servlet error
java.io.IOException: Broken pipe
at sun.nio.ch.FileDispatcher.write0(Native Method)
at sun.nio.ch.SocketDispatcher.write(SocketDispatcher.java:29)
at sun.nio.ch.IOUtil.writeFromNativeBuffer(IOUtil.java:104)
at sun.nio.ch.IOUtil.write(IOUtil.java:75)
at sun.nio.ch.SocketChannelImpl.write(SocketChannelImpl.java:334)
at java.nio.channels.Channels.write(Channels.java:60)
at java.nio.channels.Channels.access$000(Channels.java:47)
at java.nio.channels.Channels$1.write(Channels.java:134)
at com.evermind.server.http.AJPOutputStream.endRequest(AJPOutputStream.java:117)
at com.evermind.server.http.AJPRequestHandler.run(AJPRequestHandler.java:317)
at com.evermind.server.http.AJPRequestHandler.run(AJPRequestHandler.java:199)
at oracle.oc4j.network.ServerSocketReadHandler$SafeRunnable.run(ServerSocketReadHandler.java:260)
at com.evermind.util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:303)
at java.lang.Thread.run(Thread.java:619)
15/01/09 02:25:45.638 html: Broken pipe
15/01/09 02:25:45.638 html: Broken pipe
15/01/09 02:25:45.638 html: Broken pipe
15/01/09 02:25:45.639 html: Broken pipe
15/01/09 02:25:45.639 html: Broken pipe
15/01/09 02:25:45.639 html: Servlet error
java.io.IOException: Broken pipe
at sun.nio.ch.FileDispatcher.write0(Native Method)
at sun.nio.ch.SocketDispatcher.write(SocketDispatcher.java:29)
at sun.nio.ch.IOUtil.writeFromNativeBuffer(IOUtil.java:104)
at sun.nio.ch.IOUtil.write(IOUtil.java:75)
at sun.nio.ch.SocketChannelImpl.write(SocketChannelImpl.java:334)
at java.nio.channels.Channels.write(Channels.java:60)
at java.nio.channels.Channels.access$000(Channels.java:47)
at java.nio.channels.Channels$1.write(Channels.java:134)
at com.evermind.server.http.AJPOutputStream.endRequest(AJPOutputStream.java:117)
at com.evermind.server.http.AJPRequestHandler.run(AJPRequestHandler.java:317)
at com.evermind.server.http.AJPRequestHandler.run(AJPRequestHandler.java:199)
at oracle.oc4j.network.ServerSocketReadHandler$SafeRunnable.run(ServerSocketReadHandler.java:260)
at oracle.oc4j.network.ServerSocketAcceptHandler.procClientSocket(ServerSocketAcceptHandler.java:234)
at oracle.oc4j.network.ServerSocketAcceptHandler.access$700(ServerSocketAcceptHandler.java:29)
at oracle.oc4j.network.ServerSocketAcceptHandler$AcceptHandlerHorse.run(ServerSocketAcceptHandler.java:879)
at com.evermind.util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:303)
at java.lang.Thread.run(Thread.java:619)
15/01/09 02:25:45.650 html: Broken pipe
15/01/09 02:25:45.650 html: Broken pipe
15/01/09 02:25:45.650 html: Broken pipe
15/01/09 02:25:45.651 html: Broken pipe
15/01/09 02:25:45.651 html: Broken pipe
15/01/09 02:25:45.651 html: Servlet error
java.io.IOException: Broken pipe
at sun.nio.ch.FileDispatcher.write0(Native Method)
at sun.nio.ch.SocketDispatcher.write(SocketDispatcher.java:29)
at sun.nio.ch.IOUtil.writeFromNativeBuffer(IOUtil.java:104)
at sun.nio.ch.IOUtil.write(IOUtil.java:75)
at sun.nio.ch.SocketChannelImpl.write(SocketChannelImpl.java:334)
at java.nio.channels.Channels.write(Channels.java:60)
at java.nio.channels.Channels.access$000(Channels.java:47)
at java.nio.channels.Channels$1.write(Channels.java:134)
at com.evermind.server.http.AJPOutputStream.endRequest(AJPOutputStream.java:117)
at com.evermind.server.http.AJPRequestHandler.run(AJPRequestHandler.java:317)
at com.evermind.server.http.AJPRequestHandler.run(AJPRequestHandler.java:199)
at oracle.oc4j.network.ServerSocketReadHandler$SafeRunnable.run(ServerSocketReadHandler.java:260)
at com.evermind.util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:303)
at java.lang.Thread.run(Thread.java:619)
15/01/09 02:25:45.658 html: Broken pipe
15/01/09 02:25:45.658 html: Broken pipe
15/01/09 02:25:45.658 html: Broken pipe
15/01/09 02:25:45.658 html: Broken pipe
15/01/09 02:25:45.658 html: Broken pipe
15/01/09 02:25:45.659 html: Servlet error
java.io.IOException: Broken pipe
at sun.nio.ch.FileDispatcher.write0(Native Method)
at sun.nio.ch.SocketDispatcher.write(SocketDispatcher.java:29)
at sun.nio.ch.IOUtil.writeFromNativeBuffer(IOUtil.java:104)
at sun.nio.ch.IOUtil.write(IOUtil.java:75)
at sun.nio.ch.SocketChannelImpl.write(SocketChannelImpl.java:334)
at java.nio.channels.Channels.write(Channels.java:60)
at java.nio.channels.Channels.access$000(Channels.java:47)
at java.nio.channels.Channels$1.write(Channels.java:134)
at com.evermind.server.http.AJPOutputStream.endRequest(AJPOutputStream.java:117)
at com.evermind.server.http.AJPRequestHandler.run(AJPRequestHandler.java:317)
at com.evermind.server.http.AJPRequestHandler.run(AJPRequestHandler.java:199)
at oracle.oc4j.network.ServerSocketReadHandler$SafeRunnable.run(ServerSocketReadHandler.java:260)
at com.evermind.util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:303)
at java.lang.Thread.run(Thread.java:619)
15/01/09 02:25:45.674 html: Broken pipe
15/01/09 02:25:45.675 html: Broken pipe
15/01/09 02:25:45.675 html: Broken pipe
15/01/09 02:25:45.675 html: Broken pipe
15/01/09 02:25:45.675 html: Broken pipe
15/01/09 02:25:45.675 html: Servlet error
java.io.IOException: Broken pipe
at sun.nio.ch.FileDispatcher.write0(Native Method)
at sun.nio.ch.SocketDispatcher.write(SocketDispatcher.java:29)
at sun.nio.ch.IOUtil.writeFromNativeBuffer(IOUtil.java:104)
at sun.nio.ch.IOUtil.write(IOUtil.java:75)
at sun.nio.ch.SocketChannelImpl.write(SocketChannelImpl.java:334)
at java.nio.channels.Channels.write(Channels.java:60)
at java.nio.channels.Channels.access$000(Channels.java:47)
at java.nio.channels.Channels$1.write(Channels.java:134)
at com.evermind.server.http.AJPOutputStream.endRequest(AJPOutputStream.java:117)
at com.evermind.server.http.AJPRequestHandler.run(AJPRequestHandler.java:317)
at com.evermind.server.http.AJPRequestHandler.run(AJPRequestHandler.java:199)
at oracle.oc4j.network.ServerSocketReadHandler$SafeRunnable.run(ServerSocketReadHandler.java:260)
at com.evermind.util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:303)
at java.lang.Thread.run(Thread.java:619)
15/01/09 02:25:45.678 html: Broken pipe
15/01/09 02:25:45.678 html: Broken pipe
15/01/09 02:25:45.678 html: Broken pipe
15/01/09 02:25:45.678 html: Broken pipe
15/01/09 02:25:45.678 html: Broken pipe
15/01/09 02:25:45.678 html: Servlet error
java.io.IOException: Broken pipe
at sun.nio.ch.FileDispatcher.write0(Native Method)
at sun.nio.ch.SocketDispatcher.write(SocketDispatcher.java:29)
at sun.nio.ch.IOUtil.writeFromNativeBuffer(IOUtil.java:104)
at sun.nio.ch.IOUtil.write(IOUtil.java:75)
at sun.nio.ch.SocketChannelImpl.write(SocketChannelImpl.java:334)
at java.nio.channels.Channels.write(Channels.java:60)
at java.nio.channels.Channels.access$000(Channels.java:47)
at java.nio.channels.Channels$1.write(Channels.java:134)
at com.evermind.server.http.AJPOutputStream.endRequest(AJPOutputStream.java:117)
at com.evermind.server.http.AJPRequestHandler.run(AJPRequestHandler.java:317)
at com.evermind.server.http.AJPRequestHandler.run(AJPRequestHandler.java:199)
at oracle.oc4j.network.ServerSocketReadHandler$SafeRunnable.run(ServerSocketReadHandler.java:260)
at oracle.oc4j.network.ServerSocketAcceptHandler.procClientSocket(ServerSocketAcceptHandler.java:234)
at oracle.oc4j.network.ServerSocketAcceptHandler.access$700(ServerSocketAcceptHandler.java:29)
at oracle.oc4j.network.ServerSocketAcceptHandler$AcceptHandlerHorse.run(ServerSocketAcceptHandler.java:879)
at com.evermind.util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:303)
at java.lang.Thread.run(Thread.java:619)
15/01/09 02:28:40.342 html: 10.1.3.4.0 Stopped
15/01/09 02:29:23.990 10.1.3.4.0 Started
15/01/09 02:29:28.464 html: 10.1.3.4.0 Started
15/01/09 02:29:33.291 html: oracle.apps.fnd.security.LeakDetectionFilter.initialized:1420788573291
15/01/09 02:29:33.297 html: LeakSetting:
global:true,session:false,aggressive:false,stderr:false,appslog:false,corelog:false
ignoring:null
15/01/09 02:31:29.20 html: chain failed
com.evermind[Oracle Containers for J2EE 10g (10.1.3.4.0) ].server.http.HttpIOException: Broken pipe
at com.evermind[Oracle Containers for J2EE 10g (10.1.3.4.0) ].server.http.EvermindServletOutputStream.write(EvermindServletOutputStream.java:210)
at com.evermind[Oracle Containers for J2EE 10g (10.1.3.4.0) ].server.http.HttpApplication.include(HttpApplication.java:4198)
at com.evermind[Oracle Containers for J2EE 10g (10.1.3.4.0) ].server.http.ResourceFilterChain.doFilter(ResourceFilterChain.java:54)
at oracle.apps.jtf.base.session.ReleaseResFilter.doFilter(ReleaseResFilter.java:26)
at com.evermind[Oracle Containers for J2EE 10g (10.1.3.4.0) ].server.http.EvermindFilterChain.doFilter(EvermindFilterChain.java:15)
at oracle.apps.fnd.security.AppsServletFilter.doFilter(AppsServletFilter.java:318)
at com.evermind[Oracle Containers for J2EE 10g (10.1.3.4.0) ].server.http.FileRequestDispatcher.handleWithFilter(FileRequestDispatcher.java:133)
at com.evermind[Oracle Containers for J2EE 10g (10.1.3.4.0) ].server.http.FileRequestDispatcher.unprivileged_forwardInternal(FileRequestDispatcher.java:283)
at com.evermind[Oracle Containers for J2EE 10g (10.1.3.4.0) ].server.http.FileRequestDispatcher.access$100(FileRequestDispatcher.java:29)
at com.evermind[Oracle Containers for J2EE 10g (10.1.3.4.0) ].server.http.FileRequestDispatcher$2.oc4jRun(FileRequestDispatcher.java:254)
at oracle.oc4j.security.OC4JSecurity.doPrivileged(OC4JSecurity.java:284)
at com.evermind[Oracle Containers for J2EE 10g (10.1.3.4.0) ].server.http.FileRequestDispatcher.forwardInternal(FileRequestDispatcher.java:259)
at com.evermind[Oracle Containers for J2EE 10g (10.1.3.4.0) ].server.http.HttpRequestHandler.doProcessRequest(HttpRequestHandler.java:868)
at com.evermind[Oracle Containers for J2EE 10g (10.1.3.4.0) ].server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:453)
at com.evermind[Oracle Containers for J2EE 10g (10.1.3.4.0) ].server.http.AJPRequestHandler.run(AJPRequestHandler.java:313)
at com.evermind[Oracle Containers for J2EE 10g (10.1.3.4.0) ].server.http.AJPRequestHandler.run(AJPRequestHandler.java:199)
at oracle.oc4j.network.ServerSocketReadHandler$SafeRunnable.run(ServerSocketReadHandler.java:260)
at com.evermind[Oracle Containers for J2EE 10g (10.1.3.4.0) ].util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:303)
at java.lang.Thread.run(Thread.java:619)
15/01/09 02:31:29.20 html: Servlet error
java.io.IOException: Broken pipe
at sun.nio.ch.FileDispatcher.write0(Native Method)
at sun.nio.ch.SocketDispatcher.write(SocketDispatcher.java:29)
at sun.nio.ch.IOUtil.writeFromNativeBuffer(IOUtil.java:104)
at sun.nio.ch.IOUtil.write(IOUtil.java:75)
at sun.nio.ch.SocketChannelImpl.write(SocketChannelImpl.java:334) -
IMac (2007) intermittent power issues
Hi,
I have a 2007 iMac. I am getting intermittent power issues with it.
One day it wont power up at all...and might not power up for a number of weeks. And just when I have given up on it, it will power up and work for a wee while without any issues (including being shutdown nightly). It'll work for a while and then it'll stop working and again it may take a couple of weeks before it'll start working again.
Does anyone have any idea what might be the issue?
any help/advise greatly appreciated.Hi IsMiseAodh - did you ever determine what the cause of intermittent no response to power was? I have a iMac with a similar problem. Thanks!
-
Startup issue - Process 'Starting Framework'
Hi
I seem to have a startup issue with NM2004s. I get a Half Green/ Half Yellow icon in the MMC. The 01 instance is always yellow and never progresses onto green. I have a process status of 'starting framework'.
Anyone else had this issue?
Cheers
IanHi Ian,
I just installed the J2E on a laptop that already has a NSP instance.I am facing the same issue on the J2E.Do you remember if you could resolve this and how?
Any hints would help.
Thank you -
Managed server startup issue!!!
hi all,
i am facing managedserver startup issue
i am start the managed server it will up take the 6 min
how to reduce the time
1)i am trying differnt ways 1)threaddump 2)GCparamets
but no usee
can u see the log and give me suugestions
below log one perticuler area it will load the application 4 min
please see the time stamps 8:31:01 to 8:35:09
please give me suggistions!!
======================================
####<Apr 11, 2010 8:31:00 PM PDT> <Info> <Deployer> <agwlcrptrn1> <agwlcrptrn1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1271043060997> <BEA-149059> <Module eci.jar of application Agile is transitioning from STATE_PREPARED to STATE_ADMIN on server agwlcrptrn1.>
####<Apr 11, 2010 8:31:01 PM PDT> <Info> <EJB> <agwlcrptrn1> <agwlcrptrn1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1271043061016> <BEA-010009> <EJB Deployed EJB with JNDI name com.eigner.eci.EciSession.>
####<Apr 11, 2010 8:31:01 PM PDT> <Debug> <Deployment> <agwlcrptrn1> <agwlcrptrn1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1271043061016> <BEA-000000> <Listener: end ModuleCtx[appId=Agile, modId=eci.jar, type=ejb, Target=Cluster/AgileCluster] STATE_PREPARED>STATE_ADMIN>
####<Apr 11, 2010 8:31:01 PM PDT> <Info> <Deployer> <agwlcrptrn1> <agwlcrptrn1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1271043061016> <BEA-149060> <Module eci.jar of application Agile successfully transitioned from STATE_PREPARED to STATE_ADMIN on server agwlcrptrn1.>
####<Apr 11, 2010 8:35:09 PM PDT> <Debug> <Deployment> <agwlcrptrn1> <agwlcrptrn1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1271043309172> <BEA-000000> <Relaying updated state for app, Agile to STATE_ADMIN>
####<Apr 11, 2010 8:35:09 PM PDT> <Debug> <Deployment> <agwlcrptrn1> <agwlcrptrn1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1271043309173> <BEA-000000> < +++ Returning app's state : STATE_ACTIVE>
####<Apr 11, 2010 8:35:09 PM PDT> <Debug> <Deployment> <agwlcrptrn1> <agwlcrptrn1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <hi sandeep,
i take the thread dump 10 times at the start the server can u look into this one...
===============================
CLASSPATH=/local/mnt/agile/bea/patch_wls1030/profiles/default/sys_manifest_classpath/weblogic_patch.jar:/local/mnt/agile/bea/patch_cie660/profiles/default/sys_manifest_classpath/weblogic_patch.jar:/local/mnt/agile/bea/jrockit_160_05/lib/tools.jar:/local/mnt/agile/bea/wlserver_10.3/server/lib/weblogic_sp.jar:/local/mnt/agile/bea/wlserver_10.3/server/lib/weblogic.jar:/local/mnt/agile/bea/modules/features/weblogic.server.modules_10.3.0.0.jar:/local/mnt/agile/bea/wlserver_10.3/server/lib/webservices.jar:/local/mnt/agile/bea/modules/org.apache.ant_1.6.5/lib/ant-all.jar:/local/mnt/agile/bea/modules/net.sf.antcontrib_1.0.0.0_1-0b2/lib/ant-contrib.jar::/local/mnt/agile/agile93/agileDomain/lib/jms.jar:/local/mnt/agile/agile93/agileDomain/lib/jndi.jar:/local/mnt/agile/agile93/agileDomain/lib/tibjms.jar
PATH=/local/mnt/agile/bea/wlserver_10.3/server/bin:/local/mnt/agile/bea/modules/org.apache.ant_1.6.5/bin:/local/mnt/agile/bea/jrockit_160_05/jre/bin:/local/mnt/agile/bea/jrockit_160_05/bin:/usr/kerberos/bin:/usr/local/bin:/bin:/usr/bin:/usr/X11R6/bin
Your environment has been set.
QCHTTPHeaderIdentityAsserter.initialize
AgileAuthenticationProviderImpl.initialize
2010-04-10 20:03:14
Full thread dump Java HotSpot(TM) Server VM (10.0-b19 mixed mode):
"Thread-13" daemon prio=10 tid=0x62a8a800 nid=0x1b6 waiting on condition [0x5f7b8000..0x5f7b9130]
java.lang.Thread.State: WAITING (parking)
at sun.misc.Unsafe.park(Native Method)
- parking to wait for <0xf2d78078> (a java.util.concurrent.locks.AbstractQueuedSynchronizer$ConditionObject)
at java.util.concurrent.locks.LockSupport.park(LockSupport.java:158)
at java.util.concurrent.locks.AbstractQueuedSynchronizer$ConditionObject.await(AbstractQueuedSynchronizer.java:1925)
at java.util.concurrent.LinkedBlockingQueue.take(LinkedBlockingQueue.java:358)
at weblogic.utils.concurrent.JDK15ConcurrentBlockingQueue.take(JDK15ConcurrentBlockingQueue.java:89)
at weblogic.store.internal.PersistentStoreImpl.getOutstandingWork(PersistentStoreImpl.java:567)
at weblogic.store.internal.PersistentStoreImpl.run(PersistentStoreImpl.java:615)
at weblogic.store.internal.PersistentStoreImpl$2.run(PersistentStoreImpl.java:383)
"LDAPCache-TTLTimer" daemon prio=10 tid=0x09277000 nid=0x1b5 in Object.wait() [0x5f90b000..0x5f90bfb0]
java.lang.Thread.State: TIMED_WAITING (on object monitor)
at java.lang.Object.wait(Native Method)
- waiting on <0xf2d7c068> (a netscape.ldap.TTLTimer)
at netscape.ldap.TTLTimer.run(LDAPCache.java:828)
- locked <0xf2d7c068> (a netscape.ldap.TTLTimer)
at java.lang.Thread.run(Thread.java:619)
"LDAPConnThread-1 ldaps://qpip.qualcomm.com:389" daemon prio=10 tid=0x5f6fc000 nid=0x1b4 runnable [0x5f95c000..0x5f95d030]
java.lang.Thread.State: RUNNABLE
at java.net.SocketInputStream.socketRead0(Native Method)
at java.net.SocketInputStream.read(SocketInputStream.java:129)
at java.io.BufferedInputStream.fill(BufferedInputStream.java:218)
at java.io.BufferedInputStream.read(BufferedInputStream.java:237)
- locked <0xf2d820a8> (a java.io.BufferedInputStream)
at netscape.ldap.ber.stream.BERElement.getElement(BERElement.java:101)
at netscape.ldap.LDAPConnThread.run(LDAPConnThread.java:538)
at java.lang.Thread.run(Thread.java:619)
"Thread-12" daemon prio=10 tid=0x61c2ac00 nid=0x1b3 waiting on condition [0x5f9ad000..0x5f9adeb0]
java.lang.Thread.State: TIMED_WAITING (sleeping)
at java.lang.Thread.sleep(Native Method)
at oracle.jdbc.pool.OracleConnectionCacheTimeOutThread.run(OracleConnectionCacheTimeOutThread.java:80)
"LDAPConnThread-0 ldap://10.47.24.141:9001" daemon prio=10 tid=0x61cb5400 nid=0x1b1 runnable [0x5fb55000..0x5fb55db0]
java.lang.Thread.State: RUNNABLE
at java.net.SocketInputStream.socketRead0(Native Method)
at java.net.SocketInputStream.read(SocketInputStream.java:129)
at java.io.BufferedInputStream.fill(BufferedInputStream.java:218)
at java.io.BufferedInputStream.read(BufferedInputStream.java:237)
- locked <0xf2d920a8> (a java.io.BufferedInputStream)
at netscape.ldap.ber.stream.BERElement.getElement(BERElement.java:101)
at netscape.ldap.LDAPConnThread.run(LDAPConnThread.java:538)
at java.lang.Thread.run(Thread.java:619)
"DoSManager" daemon prio=10 tid=0x0932a000 nid=0x1b0 waiting on condition [0x5f9fe000..0x5f9fee30]
java.lang.Thread.State: TIMED_WAITING (sleeping)
at java.lang.Thread.sleep(Native Method)
at com.octetstring.vde.DoSManager.run(DoSManager.java:433)
"VDE Transaction Processor Thread" daemon prio=10 tid=0x61c07000 nid=0x1ae in Object.wait() [0x5fba6000..0x5fba7130]
java.lang.Thread.State: WAITING (on object monitor)
at java.lang.Object.wait(Native Method)
- waiting on <0xf2d70090> (a com.octetstring.vde.backend.standard.TransactionProcessor)
at java.lang.Object.wait(Object.java:485)
at com.octetstring.vde.backend.standard.TransactionProcessor.waitChange(TransactionProcessor.java:367)
- locked <0xf2d70090> (a com.octetstring.vde.backend.standard.TransactionProcessor)
at com.octetstring.vde.backend.standard.TransactionProcessor.run(TransactionProcessor.java:212)
"ExecuteThread: '16' for queue: 'weblogic.socket.Muxer'" daemon prio=10 tid=0x62a67400 nid=0x1ad waiting for monitor entry [0x5fbf7000..0x5fbf7fb0]
java.lang.Thread.State: BLOCKED (on object monitor)
at weblogic.socket.PosixSocketMuxer.processSockets(PosixSocketMuxer.java:95)
- waiting to lock <0xf2d8c098> (a weblogic.socket.PosixSocketMuxer$1)
at weblogic.socket.SocketReaderRequest.run(SocketReaderRequest.java:29)
at weblogic.socket.SocketReaderRequest.execute(SocketReaderRequest.java:42)
at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:145)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:117)
"ExecuteThread: '15' for queue: 'weblogic.socket.Muxer'" daemon prio=10 tid=0x62a66000 nid=0x1ac waiting for monitor entry [0x5fc48000..0x5fc49030]
java.lang.Thread.State: BLOCKED (on object monitor)
at weblogic.socket.PosixSocketMuxer.processSockets(PosixSocketMuxer.java:95)
- waiting to lock <0xf2d8c098> (a weblogic.socket.PosixSocketMuxer$1)
at weblogic.socket.SocketReaderRequest.run(SocketReaderRequest.java:29)
at weblogic.socket.SocketReaderRequest.execute(SocketReaderRequest.java:42)
at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:145)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:117)
"ExecuteThread: '14' for queue: 'weblogic.socket.Muxer'" daemon prio=10 tid=0x62a65000 nid=0x1ab waiting for monitor entry [0x5fc99000..0x5fc99eb0]
java.lang.Thread.State: BLOCKED (on object monitor)
at weblogic.socket.PosixSocketMuxer.processSockets(PosixSocketMuxer.java:95)
- waiting to lock <0xf2d8c098> (a weblogic.socket.PosixSocketMuxer$1)
at weblogic.socket.SocketReaderRequest.run(SocketReaderRequest.java:29)
at weblogic.socket.SocketReaderRequest.execute(SocketReaderRequest.java:42)
at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:145)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:117)
"ExecuteThread: '13' for queue: 'weblogic.socket.Muxer'" daemon prio=10 tid=0x62a63c00 nid=0x1aa waiting for monitor entry [0x5fcea000..0x5fceaf30]
java.lang.Thread.State: BLOCKED (on object monitor)
at weblogic.socket.PosixSocketMuxer.processSockets(PosixSocketMuxer.java:95)
- waiting to lock <0xf2d8c098> (a weblogic.socket.PosixSocketMuxer$1)
at weblogic.socket.SocketReaderRequest.run(SocketReaderRequest.java:29)
at weblogic.socket.SocketReaderRequest.execute(SocketReaderRequest.java:42)
at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:145)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:117)
"ExecuteThread: '12' for queue: 'weblogic.socket.Muxer'" daemon prio=10 tid=0x62a62c00 nid=0x1a9 runnable [0x5fd3b000..0x5fd3bdb0]
java.lang.Thread.State: RUNNABLE
at weblogic.socket.PosixSocketMuxer.poll(Native Method)
at weblogic.socket.PosixSocketMuxer.processSockets(PosixSocketMuxer.java:102)
- locked <0xf2d8c098> (a weblogic.socket.PosixSocketMuxer$1)
at weblogic.socket.SocketReaderRequest.run(SocketReaderRequest.java:29)
at weblogic.socket.SocketReaderRequest.execute(SocketReaderRequest.java:42)
at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:145)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:117)
"ExecuteThread: '11' for queue: 'weblogic.socket.Muxer'" daemon prio=10 tid=0x62a61c00 nid=0x1a8 waiting for monitor entry [0x5fd8c000..0x5fd8ce30]
java.lang.Thread.State: BLOCKED (on object monitor)
at weblogic.socket.PosixSocketMuxer.processSockets(PosixSocketMuxer.java:95)
- waiting to lock <0xf2d8c098> (a weblogic.socket.PosixSocketMuxer$1)
at weblogic.socket.SocketReaderRequest.run(SocketReaderRequest.java:29)
at weblogic.socket.SocketReaderRequest.execute(SocketReaderRequest.java:42)
at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:145)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:117)
"ExecuteThread: '10' for queue: 'weblogic.socket.Muxer'" daemon prio=10 tid=0x62a60800 nid=0x1a7 waiting for monitor entry [0x5fddd000..0x5fdde0b0]
java.lang.Thread.State: BLOCKED (on object monitor)
at weblogic.socket.PosixSocketMuxer.processSockets(PosixSocketMuxer.java:95)
- waiting to lock <0xf2d8c098> (a weblogic.socket.PosixSocketMuxer$1)
at weblogic.socket.SocketReaderRequest.run(SocketReaderRequest.java:29)
at weblogic.socket.SocketReaderRequest.execute(SocketReaderRequest.java:42)
at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:145)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:117)
"ExecuteThread: '9' for queue: 'weblogic.socket.Muxer'" daemon prio=10 tid=0x62a6f400 nid=0x1a6 waiting for monitor entry [0x5fe2e000..0x5fe2f130]
java.lang.Thread.State: BLOCKED (on object monitor)
at weblogic.socket.PosixSocketMuxer.processSockets(PosixSocketMuxer.java:95)
- waiting to lock <0xf2d8c098> (a weblogic.socket.PosixSocketMuxer$1)
at weblogic.socket.SocketReaderRequest.run(SocketReaderRequest.java:29)
at weblogic.socket.SocketReaderRequest.execute(SocketReaderRequest.java:42)
at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:145)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:117)
"ExecuteThread: '8' for queue: 'weblogic.socket.Muxer'" daemon prio=10 tid=0x0928d400 nid=0x1a5 waiting for monitor entry [0x5fe7f000..0x5fe7ffb0]
java.lang.Thread.State: BLOCKED (on object monitor)
at weblogic.socket.PosixSocketMuxer.processSockets(PosixSocketMuxer.java:95)
- waiting to lock <0xf2d8c098> (a weblogic.socket.PosixSocketMuxer$1)
at weblogic.socket.SocketReaderRequest.run(SocketReaderRequest.java:29)
at weblogic.socket.SocketReaderRequest.execute(SocketReaderRequest.java:42)
at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:145)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:117)
"ExecuteThread: '7' for queue: 'weblogic.socket.Muxer'" daemon prio=10 tid=0x0928c000 nid=0x1a4 waiting for monitor entry [0x5fed0000..0x5fed1030]
java.lang.Thread.State: BLOCKED (on object monitor)
at weblogic.socket.PosixSocketMuxer.processSockets(PosixSocketMuxer.java:95)
- waiting to lock <0xf2d8c098> (a weblogic.socket.PosixSocketMuxer$1)
at weblogic.socket.SocketReaderRequest.run(SocketReaderRequest.java:29)
at weblogic.socket.SocketReaderRequest.execute(SocketReaderRequest.java:42)
at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:145)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:117)
"ExecuteThread: '6' for queue: 'weblogic.socket.Muxer'" daemon prio=10 tid=0x0928b000 nid=0x1a3 waiting for monitor entry [0x5ff21000..0x5ff21eb0]
java.lang.Thread.State: BLOCKED (on object monitor)
at weblogic.socket.PosixSocketMuxer.processSockets(PosixSocketMuxer.java:95)
- waiting to lock <0xf2d8c098> (a weblogic.socket.PosixSocketMuxer$1)
at weblogic.socket.SocketReaderRequest.run(SocketReaderRequest.java:29)
at weblogic.socket.SocketReaderRequest.execute(SocketReaderRequest.java:42)
at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:145)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:117)
"ExecuteThread: '5' for queue: 'weblogic.socket.Muxer'" daemon prio=10 tid=0x0930c400 nid=0x1a2 waiting for monitor entry [0x5ff72000..0x5ff72f30]
java.lang.Thread.State: BLOCKED (on object monitor)
at weblogic.socket.PosixSocketMuxer.processSockets(PosixSocketMuxer.java:95)
- waiting to lock <0xf2d8c098> (a weblogic.socket.PosixSocketMuxer$1)
at weblogic.socket.SocketReaderRequest.run(SocketReaderRequest.java:29)
at weblogic.socket.SocketReaderRequest.execute(SocketReaderRequest.java:42)
at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:145)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:117)
"ExecuteThread: '4' for queue: 'weblogic.socket.Muxer'" daemon prio=10 tid=0x0928dc00 nid=0x1a1 waiting for monitor entry [0x5ffc3000..0x5ffc3db0]
java.lang.Thread.State: BLOCKED (on object monitor)
at weblogic.socket.PosixSocketMuxer.processSockets(PosixSocketMuxer.java:95)
- waiting to lock <0xf2d8c098> (a weblogic.socket.PosixSocketMuxer$1)
at weblogic.socket.SocketReaderRequest.run(SocketReaderRequest.java:29)
at weblogic.socket.SocketReaderRequest.execute(SocketReaderRequest.java:42)
at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:145)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:117)
"ExecuteThread: '3' for queue: 'weblogic.socket.Muxer'" daemon prio=10 tid=0x09288c00 nid=0x1a0 waiting for monitor entry [0x60014000..0x60014e30]
java.lang.Thread.State: BLOCKED (on object monitor)
at weblogic.socket.PosixSocketMuxer.processSockets(PosixSocketMuxer.java:95)
- waiting to lock <0xf2d8c098> (a weblogic.socket.PosixSocketMuxer$1)
at weblogic.socket.SocketReaderRequest.run(SocketReaderRequest.java:29)
at weblogic.socket.SocketReaderRequest.execute(SocketReaderRequest.java:42)
at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:145)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:117)
"ExecuteThread: '2' for queue: 'weblogic.socket.Muxer'" daemon prio=10 tid=0x092d4800 nid=0x19f waiting for monitor entry [0x60065000..0x600660b0]
java.lang.Thread.State: BLOCKED (on object monitor)
at weblogic.socket.PosixSocketMuxer.processSockets(PosixSocketMuxer.java:95)
- waiting to lock <0xf2d8c098> (a weblogic.socket.PosixSocketMuxer$1)
at weblogic.socket.SocketReaderRequest.run(SocketReaderRequest.java:29)
at weblogic.socket.SocketReaderRequest.execute(SocketReaderRequest.java:42)
at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:145)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:117)
"ExecuteThread: '1' for queue: 'weblogic.socket.Muxer'" daemon prio=10 tid=0x092d4400 nid=0x19e waiting for monitor entry [0x600b6000..0x600b7130]
java.lang.Thread.State: BLOCKED (on object monitor)
at weblogic.socket.PosixSocketMuxer.processSockets(PosixSocketMuxer.java:95)
- waiting to lock <0xf2d8c098> (a weblogic.socket.PosixSocketMuxer$1)
at weblogic.socket.SocketReaderRequest.run(SocketReaderRequest.java:29)
at weblogic.socket.SocketReaderRequest.execute(SocketReaderRequest.java:42)
at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:145)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:117)
"ExecuteThread: '0' for queue: 'weblogic.socket.Muxer'" daemon prio=10 tid=0x0932d800 nid=0x19d waiting for monitor entry [0x60107000..0x60107fb0]
java.lang.Thread.State: BLOCKED (on object monitor)
at weblogic.socket.PosixSocketMuxer.processSockets(PosixSocketMuxer.java:95)
- waiting to lock <0xf2d8c098> (a weblogic.socket.PosixSocketMuxer$1)
at weblogic.socket.SocketReaderRequest.run(SocketReaderRequest.java:29)
at weblogic.socket.SocketReaderRequest.execute(SocketReaderRequest.java:42)
at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:145)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:117)
"[ACTIVE] ExecuteThread: '1' for queue: 'weblogic.kernel.Default (self-tuning)'" daemon prio=10 tid=0x0932c400 nid=0x19c in Object.wait() [0x60158000..0x60159030]
java.lang.Thread.State: WAITING (on object monitor)
at java.lang.Object.wait(Native Method)
- waiting on <0xf2daa030> (a weblogic.work.ExecuteThread)
at java.lang.Object.wait(Object.java:485)
at weblogic.work.ExecuteThread.waitForRequest(ExecuteThread.java:157)
- locked <0xf2daa030> (a weblogic.work.ExecuteThread)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:178)
"Thread-7" daemon prio=10 tid=0x0932e400 nid=0x19b waiting on condition [0x601a9000..0x601a9eb0]
java.lang.Thread.State: WAITING (parking)
at sun.misc.Unsafe.park(Native Method)
- parking to wait for <0xf2daa150> (a java.util.concurrent.locks.AbstractQueuedSynchronizer$ConditionObject)
at java.util.concurrent.locks.LockSupport.park(LockSupport.java:158)
at java.util.concurrent.locks.AbstractQueuedSynchronizer$ConditionObject.await(AbstractQueuedSynchronizer.java:1925)
at java.util.concurrent.LinkedBlockingQueue.take(LinkedBlockingQueue.java:358)
at weblogic.utils.concurrent.JDK15ConcurrentBlockingQueue.take(JDK15ConcurrentBlockingQueue.java:89)
at weblogic.store.internal.PersistentStoreImpl.getOutstandingWork(PersistentStoreImpl.java:567)
at weblogic.store.internal.PersistentStoreImpl.run(PersistentStoreImpl.java:615)
at weblogic.store.internal.PersistentStoreImpl$2.run(PersistentStoreImpl.java:383)
"weblogic.timers.TimerThread" daemon prio=10 tid=0x60467800 nid=0x19a in Object.wait() [0x603fe000..0x603fef30]
java.lang.Thread.State: TIMED_WAITING (on object monitor)
at java.lang.Object.wait(Native Method)
- waiting on <0xf2daa2c0> (a weblogic.timers.internal.TimerThread)
at weblogic.timers.internal.TimerThread$Thread.run(TimerThread.java:267)
- locked <0xf2daa2c0> (a weblogic.timers.internal.TimerThread)
"weblogic.time.TimeEventGenerator" daemon prio=10 tid=0x60431800 nid=0x199 in Object.wait() [0x60555000..0x60555db0]
java.lang.Thread.State: TIMED_WAITING (on object monitor)
at java.lang.Object.wait(Native Method)
- waiting on <0xf2daa380> (a weblogic.time.common.internal.TimeTable)
at weblogic.time.common.internal.TimeTable.snooze(TimeTable.java:286)
- locked <0xf2daa380> (a weblogic.time.common.internal.TimeTable)
at weblogic.time.common.internal.TimeEventGenerator.run(TimeEventGenerator.java:117)
at java.lang.Thread.run(Thread.java:619)
"[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'" daemon prio=10 tid=0x6042e000 nid=0x198 runnable [0x605a5000..0x605a6e30]
java.lang.Thread.State: RUNNABLE
at java.util.HashMap.<init>(HashMap.java:209)
at java.util.jar.Manifest.<init>(Manifest.java:37)
at java.util.jar.JarFile.getManifestFromReference(JarFile.java:160)
at java.util.jar.JarFile.getManifest(JarFile.java:146)
at weblogic.utils.classloaders.GenericClassLoader$JarSource.getManifest(GenericClassLoader.java:528)
at weblogic.utils.classloaders.GenericClassLoader.defineClass(GenericClassLoader.java:310)
at weblogic.utils.classloaders.GenericClassLoader.findLocalClass(GenericClassLoader.java:288)
- locked <0xe5c43a98> (a weblogic.utils.classloaders.GenericClassLoader)
at weblogic.utils.classloaders.GenericClassLoader.findClass(GenericClassLoader.java:256)
at java.lang.ClassLoader.loadClass(ClassLoader.java:306)
- locked <0xe5c43a98> (a weblogic.utils.classloaders.GenericClassLoader)
at java.lang.ClassLoader.loadClass(ClassLoader.java:251)
at weblogic.utils.classloaders.GenericClassLoader.loadClass(GenericClassLoader.java:176)
at java.lang.ClassLoader.loadClassInternal(ClassLoader.java:319)
- locked <0xe5c43a98> (a weblogic.utils.classloaders.GenericClassLoader)
at java.lang.ClassLoader.defineClass1(Native Method)
at java.lang.ClassLoader.defineClass(ClassLoader.java:620)
at java.security.SecureClassLoader.defineClass(SecureClassLoader.java:124)
at weblogic.utils.classloaders.GenericClassLoader.defineClass(GenericClassLoader.java:335)
at weblogic.utils.classloaders.GenericClassLoader.findLocalClass(GenericClassLoader.java:288)
- locked <0xe5c43a98> (a weblogic.utils.classloaders.GenericClassLoader)
at weblogic.utils.classloaders.GenericClassLoader.findClass(GenericClassLoader.java:256)
at java.lang.ClassLoader.loadClass(ClassLoader.java:306)
- locked <0xe5c43a98> (a weblogic.utils.classloaders.GenericClassLoader)
at java.lang.ClassLoader.loadClass(ClassLoader.java:251)
at weblogic.utils.classloaders.GenericClassLoader.loadClass(GenericClassLoader.java:176)
at weblogic.ejb.container.deployer.EJBModule.setupEJBToImplClassDependencies(EJBModule.java:1790)
at weblogic.ejb.container.deployer.EJBModule.prepare(EJBModule.java:397)
at weblogic.application.internal.flow.ModuleListenerInvoker.prepare(ModuleListenerInvoker.java:93)
at weblogic.application.internal.flow.DeploymentCallbackFlow$1.next(DeploymentCallbackFlow.java:387)
at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:37)
at weblogic.application.internal.flow.DeploymentCallbackFlow.prepare(DeploymentCallbackFlow.java:58)
at weblogic.application.internal.flow.DeploymentCallbackFlow.prepare(DeploymentCallbackFlow.java:42)
at weblogic.application.internal.BaseDeployment$1.next(BaseDeployment.java:615)
at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:37)
at weblogic.application.internal.BaseDeployment.prepare(BaseDeployment.java:191)
at weblogic.application.internal.EarDeployment.prepare(EarDeployment.java:16)
at weblogic.application.internal.DeploymentStateChecker.prepare(DeploymentStateChecker.java:155)
at weblogic.deploy.internal.targetserver.AppContainerInvoker.prepare(AppContainerInvoker.java:60)
at weblogic.deploy.internal.targetserver.AppDeployment.prepare(AppDeployment.java:141)
at weblogic.management.deploy.internal.DeploymentAdapter$1.doPrepare(DeploymentAdapter.java:39)
at weblogic.management.deploy.internal.DeploymentAdapter.prepare(DeploymentAdapter.java:187)
at weblogic.management.deploy.internal.AppTransition$1.transitionApp(AppTransition.java:21)
at weblogic.management.deploy.internal.ConfiguredDeployments.transitionApps(ConfiguredDeployments.java:233)
at weblogic.management.deploy.internal.ConfiguredDeployments.prepare(ConfiguredDeployments.java:165)
at weblogic.management.deploy.internal.ConfiguredDeployments.deploy(ConfiguredDeployments.java:122)
at weblogic.management.deploy.internal.DeploymentServerService.resume(DeploymentServerService.java:173)
at weblogic.management.deploy.internal.DeploymentServerService.start(DeploymentServerService.java:89)
at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
"Timer-1" daemon prio=10 tid=0x609e3800 nid=0x197 in Object.wait() [0x605f7000..0x605f80b0]
java.lang.Thread.State: TIMED_WAITING (on object monitor)
at java.lang.Object.wait(Native Method)
- waiting on <0xf2d7a2c0> (a java.util.TaskQueue)
at java.util.TimerThread.mainLoop(Timer.java:509)
- locked <0xf2d7a2c0> (a java.util.TaskQueue)
at java.util.TimerThread.run(Timer.java:462)
"Timer-0" daemon prio=10 tid=0x609e0000 nid=0x196 in Object.wait() [0x62350000..0x62351130]
java.lang.Thread.State: TIMED_WAITING (on object monitor)
at java.lang.Object.wait(Native Method)
- waiting on <0xf2d7a3b0> (a java.util.TaskQueue)
at java.util.TimerThread.mainLoop(Timer.java:509)
- locked <0xf2d7a3b0> (a java.util.TaskQueue)
at java.util.TimerThread.run(Timer.java:462)
"RMI TCP Accept-9896" daemon prio=10 tid=0x61ebf800 nid=0x194 runnable [0x623ba000..0x623bb030]
java.lang.Thread.State: RUNNABLE
at java.net.PlainSocketImpl.socketAccept(Native Method)
at java.net.PlainSocketImpl.accept(PlainSocketImpl.java:384)
- locked <0xf2d76210> (a java.net.SocksSocketImpl)
at java.net.ServerSocket.implAccept(ServerSocket.java:453)
at java.net.ServerSocket.accept(ServerSocket.java:421)
at sun.rmi.transport.tcp.TCPTransport$AcceptLoop.executeAcceptLoop(TCPTransport.java:369)
at sun.rmi.transport.tcp.TCPTransport$AcceptLoop.run(TCPTransport.java:341)
at java.lang.Thread.run(Thread.java:619)
"RMI TCP Accept-0" daemon prio=10 tid=0x61eb6c00 nid=0x193 runnable [0x6240b000..0x6240beb0]
java.lang.Thread.State: RUNNABLE
at java.net.PlainSocketImpl.socketAccept(Native Method)
at java.net.PlainSocketImpl.accept(PlainSocketImpl.java:384)
- locked <0xf2da0170> (a java.net.SocksSocketImpl)
at java.net.ServerSocket.implAccept(ServerSocket.java:453)
at java.net.ServerSocket.accept(ServerSocket.java:421)
at sun.rmi.transport.tcp.TCPTransport$AcceptLoop.executeAcceptLoop(TCPTransport.java:369)
at sun.rmi.transport.tcp.TCPTransport$AcceptLoop.run(TCPTransport.java:341)
at java.lang.Thread.run(Thread.java:619)
"Low Memory Detector" daemon prio=10 tid=0x63b01400 nid=0x192 runnable [0x00000000..0x00000000]
java.lang.Thread.State: RUNNABLE
"CompilerThread1" daemon prio=10 tid=0x63901c00 nid=0x191 runnable [0x00000000..0x634f3278]
java.lang.Thread.State: RUNNABLE
"CompilerThread0" daemon prio=10 tid=0x63900800 nid=0x190 runnable [0x00000000..0x635742f8]
java.lang.Thread.State: RUNNABLE
"Signal Dispatcher" daemon prio=10 tid=0x0919e000 nid=0x18f waiting on condition [0x00000000..0x00000000]
java.lang.Thread.State: RUNNABLE
"Finalizer" daemon prio=10 tid=0x09183000 nid=0x18e in Object.wait() [0x63aad000..0x63aae130]
java.lang.Thread.State: WAITING (on object monitor)
at java.lang.Object.wait(Native Method)
- waiting on <0xf2d8e2d0> (a java.lang.ref.ReferenceQueue$Lock)
at java.lang.ref.ReferenceQueue.remove(ReferenceQueue.java:116)
- locked <0xf2d8e2d0> (a java.lang.ref.ReferenceQueue$Lock)
at java.lang.ref.ReferenceQueue.remove(ReferenceQueue.java:132)
at java.lang.ref.Finalizer$FinalizerThread.run(Finalizer.java:159)
"Reference Handler" daemon prio=10 tid=0x09181c00 nid=0x18d in Object.wait() [0x63afe000..0x63afefb0]
java.lang.Thread.State: WAITING (on object monitor)
at java.lang.Object.wait(Native Method)
- waiting on <0xf2daa4c8> (a java.lang.ref.Reference$Lock)
at java.lang.Object.wait(Object.java:485)
at java.lang.ref.Reference$ReferenceHandler.run(Reference.java:116)
- locked <0xf2daa4c8> (a java.lang.ref.Reference$Lock)
"main" prio=10 tid=0x0900f000 nid=0x17b in Object.wait() [0xf7f1d000..0xf7f1e208]
java.lang.Thread.State: WAITING (on object monitor)
at java.lang.Object.wait(Native Method)
- waiting on <0xf2d723c8> (a weblogic.t3.srvr.SubsystemRequest)
at weblogic.t3.srvr.SubsystemRequest.rendezvouz(SubsystemRequest.java:100)
- locked <0xf2d723c8> (a weblogic.t3.srvr.SubsystemRequest)
at weblogic.t3.srvr.SubsystemRequest.action(SubsystemRequest.java:81)
at weblogic.t3.srvr.SubsystemRequest.start(SubsystemRequest.java:51)
at weblogic.t3.srvr.ServerServicesManager.startService(ServerServicesManager.java:457)
at weblogic.t3.srvr.ServerServicesManager.startInAdminState(ServerServicesManager.java:237)
- locked <0x6536b220> (a java.lang.Class for weblogic.t3.srvr.ServerServicesManager)
at weblogic.t3.srvr.T3Srvr.initializeAdmin(T3Srvr.java:738)
at weblogic.t3.srvr.T3Srvr.startup(T3Srvr.java:499)
at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:440)
at weblogic.Server.main(Server.java:67)
"VM Thread" prio=10 tid=0x0917e800 nid=0x18c runnable
"GC task thread#0 (ParallelGC)" prio=10 tid=0x09015c00 nid=0x17c runnable
"GC task thread#1 (ParallelGC)" prio=10 tid=0x09016c00 nid=0x17d runnable
"GC task thread#2 (ParallelGC)" prio=10 tid=0x09018000 nid=0x17e runnable
"GC task thread#3 (ParallelGC)" prio=10 tid=0x09019000 nid=0x17f runnable
"GC task thread#4 (ParallelGC)" prio=10 tid=0x0901a000 nid=0x180 runnable
"GC task thread#5 (ParallelGC)" prio=10 tid=0x0901b000 nid=0x181 runnable
"GC task thread#6 (ParallelGC)" prio=10 tid=0x0901c400 nid=0x182 runnable
"GC task thread#7 (ParallelGC)" prio=10 tid=0x0901d400 nid=0x183 runnable
"GC task thread#8 (ParallelGC)" prio=10 tid=0x0901e400 nid=0x184 runnable
"GC task thread#9 (ParallelGC)" prio=10 tid=0x0901f400 nid=0x185 runnable
"GC task thread#10 (ParallelGC)" prio=10 tid=0x09020800 nid=0x186 runnable
"GC task thread#11 (ParallelGC)" prio=10 tid=0x09021800 nid=0x187 runnable
"GC task thread#12 (ParallelGC)" prio=10 tid=0x09022800 nid=0x188 runnable
"GC task thread#13 (ParallelGC)" prio=10 tid=0x09023800 nid=0x189 runnable
"GC task thread#14 (ParallelGC)" prio=10 tid=0x09024c00 nid=0x18a runnable
"GC task thread#15 (ParallelGC)" prio=10 tid=0x09025c00 nid=0x18b runnable
"VM Periodic Task Thread" prio=10 tid=0x61ec2000 nid=0x195 waiting on condition
JNI global references: 957
Heap
PSYoungGen total 229376K, used 39147K [0xe4d70000, 0xf4d70000, 0xf4d70000)
eden space 196608K, 8% used [0xe4d70000,0xe5cf3870,0xf0d70000)
from space 32768K, 70% used [0xf2d70000,0xf4427708,0xf4d70000)
to space 32768K, 0% used [0xf0d70000,0xf0d70000,0xf2d70000)
PSOldGen total 1835008K, used 0K [0x74d70000, 0xe4d70000, 0xe4d70000)
object space 1835008K, 0% used [0x74d70000,0x74d70000,0xe4d70000)
PSPermGen total 62208K, used 62093K [0x64d70000, 0x68a30000, 0x74d70000)
object space 62208K, 99% used [0x64d70000,0x68a134a8,0x68a30000) -
Startup issue when having more than one database on machine
Startup issue when having more than one database on machine:
I’ve installed two databases.
When I shutdown one of the database and try to start it up using
Startup pfile=’…location..’;
I get ora-12514: TNS: listener does not currently know of service rquirest in connect descriptor
when I try it again after 3 seconds, I get a new error, ora-01041: internal error. Hostdef extension doesn’t exist
Shutdown and Startup gave no problems when I had one database. Why am I getting problems when I have two databases?
I’m using: show parameter pfile|spfile; to make sure I have the right parameter locations, so the error shouldn’t be from location.
I’ve never installed two databases on one machine, so maybe I’m making a first-timer’s error.
Anyone know how to get this working, i.e. starting and stopping DB without issues?
Using oracle 11gR2 on Windows 7 64bit, all is working normal.
Thanks,
Ayman
Edited by: aymanzone on Jun 15, 2011 9:27 AMaymanzone wrote:
my oracle_sid is set to the name of one of my databases
echo %oracle_sid%
shows me the name of my first database.
Still not working though.
When I start the services of both databases using Services, I can connect and run queries from both of the database.
Edited by: aymanzone on Jun 15, 2011 11:47 AMFirstly ... the Oracle Service for the instance should be started for the DB you are trying to connect or start.
Next ... from the command prompt:
set oracle_sid=<Instance_Name>
sqlplus sys as sysdba
startup pfile='location of the respective db pfile'
Now, if you want to start or connect to another DB which is on the same server (again assuming the Service is STARTED) ...
From the same command prompt session or other ....
set oracle_sid=<Other_Instance_Name>
sqlplus sys as sysdba
startup pfile='location of the respective db pfile'
Edited by: Srikanth on Jun 16, 2011 12:27 AM -
Hello, everyone.
I've got an intermittent CFMAIL issue that has me perplexed.
I'm using CFMAIL to email notifications of changes made to records in a database. In the form that is used to make these changes there is a field that has email addresses of developers who need to be notified of these changes. These are a comma-delimited list of email addresses (which, according to CF9 cfmail documentation on adobe.com, is the correct way of sending to more than one address.)
Some of the records will send the email, update the timestamp on the "mailsent.log", append the new email notification to "mailsent.log", and the email is received by the person(s) to whom it was sent.
Other records, however, will (apparently) send the email, will NOT update the timestamp on "mailsent.log", but WILL append a successfully sent entry to "mailsent.log" (even though the timestamp was not updated), and the email is NOT received by the person(s) to whom it was sent. In these cases, the timestamp of the mailsent.log will not match the timestamp of the latest entry in the mailsent.log.
I've been able to determine one record that will always successfully complete the process, and one record that will always append a success entry (not altering the log timestamp) but the email will never reach its destination. I am not seeing anything in any of the data that could break the transport of the email (it's all plain text, no special characters.)
Any thoughts on this?
Thank you,
^_^UPDATE: I just now discovered something that is most likely causing this issue: more than one email address.
If the TO= of CFMAIL is "[email protected]", the email goes out without any issues.
If the TO= of CFMAIL is "[email protected],[email protected]", then the email is not received, the timestamp of the log file is not updated (even though the success message is appended to the log).
According to the docs for CF9 CFMAIL, the TO= field should be either a single email address -OR- a comma-delimited list of email addresses (or a query column that will be treated like a comma-delimited list).
What could be causing this?
Thanks,
^_^ -
I have a problem with system startup. My MacBook is pretty much brand new and the system is not cluttered or anything. And still the startup-process freezes even before the apple logo appears, so I just get the grey screen and that's it. I have read about other startup issues, but in those cases the computer at least booted until the apple logo was shown, so my case is slightly different.
After unplugging my external USB hard drive startup works. It also works when I plug it into the other USB-slot. Other devices plugged into the problematic slot (keyboard, USB-stick) work and do not cause problems during startup.
Any experiences with this problem? Would you say the USB-slot is broken in any way? Is it something that can be fixed?
Ordinarily, I would just use the other slot and be done with it. Since the computer is brand new, however, I'd prefer to be on the safe side.
Thanks in advance,
TimoHi
+"Would you say the USB-slot is broken in any way?"+
Possibly? Running an Apple Hardware Test might say?
+"Is it something that can be fixed?"+
Yes. It should be covered under the standard 1 year warranty regardless. Provided the fault is not down to wilful or accidental damage it will be covered under the warranty.
You could connect the external USB hard drive in the affected slot an restart the mac in verbose mode (command+v) at restart. This should display error messages - if any - at the point where the start-up stalls. Possibly giving a clue as to what it's having a problem with? You may see an I/OKit error problem or something similar?
Tony -
Captivate 6 Output intermittent performance issues
I am getting feedback from users that some of my captivate e-learning is having intermittent performance issues when being run via our LMS. I am hearing of slow down and pausing between slides and questiosn in quizs. I have seen this in action and I cannot pin point what is causing this. The problem doesnt affect most users, then some will report these extreme slow downs.
I have ruled out any specific browser or OS. Does anyone have similar experiences and any ideas around what may be causing it? I want to rule out Captivate if possible and potentially point the finger at our LMS. However I dont know how the content within Captivate is cached/downloaded when being played.
Does anyone know how Captviate operates when run via an LMS. Does it download in full, or buffer content and download progressively as the person moves through the content? If I can work this out I may be able to pinpoint the problem.
Sorry if this is a bit vague, any help or additional experiences would be greatly appreciated.
JayThere is also network latency to consider, in addition to server latency. In our building, network bandwidth availablity can surge or slow down depending on which subnetwork we're on, if there is several VOiP or web video conferencing sessions taking up bandwidth. If you're distributing to geographically separated organizations, then you may also experience latency issues related to the local infrastructure.
Just a thought... -
Hi,
Hope someone can help with this issue I'm having. It seems to be an intermittent issue but has started to happen more often recently.
Originally around a few months ago I would turn on all my devices (TV, AV Receiver and YouView Box) and I would not get any sound (I do get picture). By just switching channels, the sound would then be heard. I presumed it was a problem with the HDMI connections and it didnt happen all the time so not such an issue.
More recently (in the last 4 weeks) switching channels no longer returns the sound. I need to switch the you view box off and then back on to get sound. Again not such a big issue as although it was happening more often it was a simple work around.
However in the last few days the problem has gotten worse. Now instead of the no sound occurring when I switch everything on, the sound is turning off when I change channels and also when I'm just watching a channel. Again the fix is to just switch the you view box off and back on but because its happening at least once when I switch on and then at least once when I'm watching tv I'm actually starting to get a bit annoyed.
Could this be my setup or equipment or a problem with the youview box?
My you view software is; manufacturer 18.3.0, component 2.5.6, platform 1017 and ISP 90.
The you view is connected to a Onkyo TX-SR390 and then onto a LG 50PK590. All done vie HDMI.
Thanks
RobHi Jamie et al,
From the reports above, it appears there is an intermittent compatibility issue between the YouView Humax box and Onkyo A/V receivers. I'm not aware of any issues with other A/V receivers but it is not clear which of the devices is at fault.
There are two simple workarounds:
1. Set HDMI Audio Format to Stereo (no good if you want surround sound from HD channels and Video on Demand).
2. Use an S/PDIF optical cable as Onkyo advised.
Option 2 is the best option - you just need a suitable optical (TOSlink) cable - available from the BT Shop or many high street shops for a few pounds (or eBay).
On the YouView STB be sure to set S/PDIF Audio Format to Surround (in Settings - TV Signal & Quality).
On the Onkyo receiver you should find a digital input screen that lets you assign the appropriate optical input to be associate with a particular HDMI input. See page 46 of the Onkyo TX-NR525 manual to assign the Optical audio input to your YouView source - this should override the HDMI audio.
http://www.intl.onkyo.com/downloads/manuals/pdf/tx-nr525_manual_e.pdf
Note there is no loss of quality doing this with a YouView box - you will still get 5.1 Dolby Digital audio from programmes that have surround sound (e.g. some HD films, sport and drama on Freeview and Extra TV channels as well as Video on Demand).
(Note BluRay players can take advantage of the extra bandwidth available on HDMI to output Dolby True HD 7.1 etc which is not available over S/PDIF but I'm not aware of any Set Top Boxes that offer 7.1 audio).
I'll see if we can reproduce this and raise it as an issue if we can - thanks for providing the feedback from Onkyo.
Please let us know if this solves your problem or if you need any help.
BT TV Expert
I am a BT Employee and an expert on TV queries. I am here to give advice primarily on the BT Vision+ box. Go Here for more info.
If my post has been helpful, please click on the Ratings star on the left-hand side of the post. -
RV320 Intermittent connectivity issues
We have been having intermittent problems with internet (WAN) connectivity on my wife's small business computer network. Connectivity will be fine for a day or so, and then we will have a period of poor and frequently interrupted connectivity. I have our router (a Cisco RV320K9NA) set to send me notifications about problems, and when our internet connection is disrupted, I receive the following notifications from the router:
Mar 28 07:31:11 2015 routeree1df4 Network Log: NSD FAIL WAN[1]
Mar 28 07:32:11 2015 routeree1df4 Network Log: NSD SUCCESS WAN[1]
Mar 28 07:36:05 2015 routeree1df4 Network Log: NSD FAIL WAN[1]
Mar 28 07:39:08 2015 routeree1df4 Network Log: NSD SUCCESS WAN[1]
Mar 28 07:39:48 2015 routeree1df4 Network Log: NSD FAIL WAN[1]
Mar 28 07:40:58 2015 routeree1df4 Network Log: NSD SUCCESS WAN[1]
The above is a sample, there are many more notifications of this type in the log.
Our network configuration is as follows:
Our internet provider's cable modem is connected to our router, which is connected to a Netgear ProSafe 24 port switch. All of our network devices and computers are connected to the switch.
We have tried many things to fix this problem. Our internet provider (Time Warner) has replaced their cable modem. We have replaced our router. My wife increased the speed of our network connection based on usage data from the internet provider. I have replaced the ethernet cable between the router and the cable modem.
We have not been able to reproduce the connectivity problem when we directly connect a laptop to the cable modem, so the internet provider has decided that the issue must be internal to our network and/or router, washing their hands of the whole problem.
I'm technically proficient, but I'm no networking technician, so I'm looking for help and suggestions to fix this problem. Thanks in advance for any suggestions that you can offer.No, it was wireless. Here is the same test run whilst wired in. I don't understand this though. I wasn't complaining about the speed? I was complaining about the general intermittent connectivity issues we experience, and the regular lack of availability the service provides. Perhaps these are standard tests you have to run beforehand?
The last time I complained about my connectivity issues was in February. If you have access to the ticketing tool, you'll be able to see the nature of my complaint. It was ticket number: VOL051-4263008159178. Something was "done at the exchange" and someone logged onto my HH3 and changed the wireless channel and that "fixed" it. Trouble is, it's been the same ever since. We have a few hours where the connection is stable, then we'll start to get packet losses when trying to connect to sites like Google.co.uk, Bt.com etc etc.
I'm no expert, but this is clearly more than an issue with the wireless channel and some spurious problem at the exchange. This is a continuing nightmare for us which is preventing us from accessing the internet for hours at a time and therefore taking full advantage of the services we pay a lot of money for!
Maybe you are looking for
-
Problem with certificate authentication at wlc 4402
Hi, we have a problem to get a connection from the client to the WLC. we are using Cisco Aironet 1130 AG and a Cisco 4402 WLC in our network. The certificate service is installed on a Windows 2008 R2 server. We use a standalone Root CA with a Enter
-
How do I add a printer on my iPad through a Cisco router
Having problems getting my iPad to hook up printers through a Cisco router
-
My wife and i have iphone 4's and we want our own userids and passwords how do we change that?
We have an ipad and two phones that all conect to each other and I want my own password and userid and she does too how do we fix that?
-
How to change the format of tooltips in bar chart?
Hi experts, I am using the WAD and using the bar chart to show the query result. However, when the mouse hovered on the bar, a tooptip would appear and show both charateristics' value and key figures' values(x and y axis). The requirement is that too
-
Executing a Procedure with IN and OUT parameters
How do I call/execute the following procedure? When I call as Courses(StartDate,EndDate,nCount,State,LastUpdate); I get an error: Error(92,45): PLS-00363: expression 'nCount' cannot be used as an assignment target Error(92,55): PLS-00363: expression